On the powernv9 and powernv10 machines, the PSIHB interrupts are
currently initialized with a PQ state of 0b01, i.e. interrupts are
disabled. However real hardware initializes them to 0b00 for the
PSIHB. This patch updates it, in case an hypervisor is in the mood of
checking it.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230703081215.55252-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PQ state of a xive interrupt is always initialized to Q=1, which
means the interrupt is disabled. Since a xive source can be embedded
in many objects, this patch adds a property to allow that behavior to
be refined if needed.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230703081215.55252-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Direct TIMA operations can be done through 4 pages, each with a
different privilege level dictating what fields can be accessed. On
the other hand, indirect TIMA accesses on P10 are done through a
single page, which is the equivalent of the most privileged page of
direct TIMA accesses.
The offset in the IC bar of an indirect access specifies what hw
thread is targeted (page shift bits) and the offset in the
TIMA being accessed (the page offset bits). When the indirect
access is calling the underlying direct access functions, it is
therefore important to clearly separate the 2, as the direct functions
assume any page shift bits define the privilege ring level. For
indirect accesses, those bits must be 0. This patch fixes the offset
passed to direct TIMA functions.
It didn't matter for SMT1, as the 2 least significant bits of the page
shift are part of the hw thread ID and always 0, so the direct TIMA
functions were accessing the privilege ring 0 page. With SMT4/8, it is
no longer true.
The fix is specific to P10, as indirect TIMA access on P9 was handled
differently.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230703080858.54060-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently on PPC64 qemu always dumps the guest memory in
Big Endian (BE) format even though the guest running in Little Endian
(LE) mode. So crash tool fails to load the dump as illustrated below:
Log :
$ virsh dump DOMAIN --memory-only dump.file
Domain 'DOMAIN' dumped to dump.file
$ crash vmlinux dump.file
<snip>
crash 8.0.2-1.el9
WARNING: endian mismatch:
crash utility: little-endian
dump.file: big-endian
WARNING: machine type mismatch:
crash utility: PPC64
dump.file: (unknown)
crash: dump.file: not a supported file format
<snip>
This happens because cpu_get_dump_info() passes cpu->env->has_hv_mode
to function ppc_interrupts_little_endian(), the cpu->env->has_hv_mode
always set for powerNV even though the guest is not running in hv mode.
The hv mode should be taken from msr_mask MSR_HVB bit
(cpu->env.msr_mask & MSR_HVB). This patch fixes the issue by passing
MSR_HVB value to ppc_interrupts_little_endian() in order to determine
the guest endianness.
The crash tool also expects guest kernel endianness should match the
endianness of the dump.
The patch was tested on POWER9 box booted with Linux as host in
following cases:
Host-Endianess Qemu-Target-Machine Qemu-Generated-Guest
Memory-Dump-Format
BE powernv(OPAL/PowerNV) LE
BE powernv(OPAL/PowerNV) BE
LE powernv(OPAL/PowerNV) LE
LE powernv(OPAL/PowerNV) BE
LE pseries(OPAL/PowerNV/pSeries) KVMHV LE
LE pseries TCG LE
Fixes: 5609400a42 ("target/ppc: Set the correct endianness for powernv memory
dumps")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-ID: <20230623072506.34713-1-nnmlinux@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can get CPUState from env with env_cpu without going through
PowerPCCPU and casting that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <28424220f37f51ce97f24cadc7538a9c0d16cb45.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 7a3fe174b1 removed usage of POWERPC_SYSCALL_VECTORED, drop
the unused define as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <50adc24f9d408882128e896d8a81a1a059c41836.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some helpers only have a CPUState local to call cpu_interrupt_exittb()
but we can use env_cpu for that and remove the local.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <aa34e449552c6ab52d48938ccbe762fc06adac01.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All powerpc exception handlers share some code when handling machine
check exceptions. Move this to a common function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <9cfffaa35aa894086dd092af6b0b26f2d62ff3de.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
CPUState is rarely needed by this function (only for logging a fatal
error) and it's easy to get from the env parameter so passing it
separately is not necessary.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <f42761401c708fd6e02f7523d9f709b1972e5863.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Booting linux on the powernv10 machine logs a few errors like:
Invalid read at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8)
Invalid write at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8)
Invalid read at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8)
Those errors happen when linux is resetting XIVE. We're trying to
read/write the enablement bit for the hardware context and qemu
doesn't allow indirect TIMA accesses of less than 8 bytes. Direct TIMA
access can go through though, as well as indirect TIMA accesses on P9.
So even though there are some restrictions regarding the address/size
combinations for TIMA access, the example above is perfectly valid.
This patch lets indirect TIMA accesses of all sizes go through. The
special operations will be intercepted and the default "raw" handlers
will pick up all other requests and complain about invalid sizes as
appropriate.
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230626094057.1192473-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The powernv machine can boot Linux to VFS mount with icount enabled.
Add a test case for it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230625103700.8992-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Several instructions and register access require icount reads and are
missing translator_io_start().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230625103700.8992-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Apple sungem devices are expected to have WOL MMIO registers.
Add a region to prevent transaction failures, and implement the
WOL-disable CSR write because the Linux driver reset writes
this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20230625201628.65231-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
TFMR is the Time Facility Management Register which is specific to
POWER CPUs, and used for the purpose of timebase management (generally
by firmware, not the OS).
Add helpers for the TFMR register, which will form part of the core
timebase facility model in future but for now behaviour is unchanged.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230625120317.13877-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
POWER book4 (implementation-specific) SPRs are sometimes in their own
functions, but in other cases are mixed with architected SPRs. Do some
spring cleaning on these.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230625120317.13877-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We don't emulate the gigabit ethernet part of the chip but the MorphOS
driver accesses these and expects to get some valid looking result
otherwise it hangs. Add some minimal dummy implementation to avoid rhis.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230605215145.29458746335@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No need to generate TCG-specific decodetree files
when TCG is disabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230626140100.67941-1-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The clock update logic reads the clock twice to compute the new clock
value, with a value derived from the later time subtracted from a value
derived from the earlier time. The delta causes time to be lost.
This can ultimately result in time becoming unsynchronized between CPUs
and that can cause OS lockups, timeouts, watchdogs, etc. This can be
seen running a KVM guest (that causes lots of TB updates) on a powernv
SMP machine.
Fix this by reading the clock once.
Cc: qemu-stable@nongnu.org
Fixes: dbdd25065e ("Implement time-base start/stop helpers.")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230629020713.327745-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
HDEC interrupts are edge-triggered on HDECR underflow (notably different
from DEC which is level-triggered).
HDEC interrupts already clear the irq on delivery so that does not need
to be changed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230625122045.15544-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
skiboot only uses mmio to access the PSI registers (once the BAR is
set) but we don't have any reason to block the accesses through
xscom. This patch enables xscom access to the PSI registers. It
converts the xscom addresses to mmio addresses, which requires a bit
of care for the PSIHB, then reuse the existing mmio ops.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230630102609.193214-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* Add raw_writes ops for register whose write induce TLB maintenance
* hw/arm/sbsa-ref: use XHCI to replace EHCI
* Avoid splitting Zregs across lines in dump
* Dump ZA[] when active
* Fix SME full tile indexing
* Handle IC IVAU to improve compatibility with JITs
* xlnx-canfd-test: Fix code coverity issues
* gdbstub: Guard M-profile code with CONFIG_TCG
* allwinner-sramc: Set class_size
* target/xtensa: Assert that interrupt level is within bounds
* Avoid over-length shift in arm_cpu_sve_finalize() error case
* Define new 'neoverse-v1' CPU type
-----BEGIN PGP SIGNATURE-----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=/MkB
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20230706' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Add raw_writes ops for register whose write induce TLB maintenance
* hw/arm/sbsa-ref: use XHCI to replace EHCI
* Avoid splitting Zregs across lines in dump
* Dump ZA[] when active
* Fix SME full tile indexing
* Handle IC IVAU to improve compatibility with JITs
* xlnx-canfd-test: Fix code coverity issues
* gdbstub: Guard M-profile code with CONFIG_TCG
* allwinner-sramc: Set class_size
* target/xtensa: Assert that interrupt level is within bounds
* Avoid over-length shift in arm_cpu_sve_finalize() error case
* Define new 'neoverse-v1' CPU type
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmSmwEEZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vBcD/4vKUw6klRV7vyz/KBr2AOi
# Z1FnkLmOhwdp7CKvAVfU58TbPEJ8Fjo7OjziByV5nn/Ht9XrXcdl/E+0JamgrJ/n
# G90ZfpoY3Boan4XBukBz/KX63sT1erF4io1NxbvqLxZ2mbZWNb0D1v2qkxC5zPFE
# 97knlbSle4/VB8N6VgaPaWKVy5gmBZQwl7NUlFtB8TTZp3HPo0V77E9p1Wqpwpls
# BNbqdtgUre3dlJci2f24PmXHYraKa68qk9xGnsSae96EY2+pOHbKhoZ/Fobaor2C
# u+dfgQ3fY3aLDVKx8UESIUoqkGoVqwEbmt+pWG2rJiljLkdsI3ZsVq7p3+VGbLAN
# berL14kCC2vRQYeNUwxeh5wdNVXc58xhWI5KXQRe8hr1dKWS5LQEHWgr7g7mb0+m
# zPHqbdF4FR1DAV29vQ9WyK4zttrinFAYl+zvLyd8dX2ogoUeivR+4o3YX4hlFr4H
# vcrglZbCGqAb3oKQG3PSGliS9GYtBwodLqKEH8PfcwfOP5PIcnSVc0Kl9DSzf7um
# dAuYpaK/XW3MPx5qpWjnip4dRWUV5m/6nSCJr+fELEv3A0sGZY4pywv5NS/Yg1wE
# nXdi8D+nyx9+AAiWTcB+ePsLuDEO2gYtubfqed99TFoJbL6/b4NbH8YE6cF3N/gY
# lqFyvEIYNJZ9klf7XKnX2w==
# =/MkB
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Jul 2023 02:23:13 PM BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20230706' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Avoid over-length shift in arm_cpu_sve_finalize() error case
target/arm: Define neoverse-v1
target/arm: Suppress more TCG unimplemented features in ID registers
target/xtensa: Assert that interrupt level is within bounds
hw: arm: allwinner-sramc: Set class_size
target/arm: gdbstub: Guard M-profile code with CONFIG_TCG
tests/qtest: xlnx-canfd-test: Fix code coverity issues
target/arm: Handle IC IVAU to improve compatibility with JITs
target/arm: Fix SME full tile indexing
target/arm: Dump ZA[] when active
target/arm: Avoid splitting Zregs across lines in dump
tests/tcg/aarch64/sysregs.c: Use S syntax for id_aa64zfr0_el1 and id_aa64smfr0_el1
hw/arm/sbsa-ref: use XHCI to replace EHCI
target/arm: Add raw_writes ops for register whose write induce TLB maintenance
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If you build QEMU with the clang sanitizer enabled, you can see it
fire when running the arm-cpu-features test:
$ QTEST_QEMU_BINARY=./build/arm-clang/qemu-system-aarch64 ./build/arm-clang/tests/qtest/arm-cpu-features
[...]
../../target/arm/cpu64.c:125:19: runtime error: shift exponent 64 is too large for 64-bit type 'unsigned long long'
[...]
This happens because the user can specify some incorrect SVE
properties that result in our calculating a max_vq of 0. We catch
this and error out, but before we do that we calculate
vq_mask = MAKE_64BIT_MASK(0, max_vq);$
and the MAKE_64BIT_MASK() call is only valid for lengths that are
greater than zero, so we hit the undefined behaviour.
Change the logic so that if max_vq is 0 we specifically set vq_mask
to 0 without going via MAKE_64BIT_MASK(). This lets us drop the
max_vq check from the error-exit logic, because if max_vq is 0 then
vq_map must now be 0.
The UB only happens in the case where the user passed us an incorrect
set of SVE properties, so it's not a big problem in practice.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230704154332.3014896-1-peter.maydell@linaro.org
Now that we have implemented support for FEAT_LSE2, we can define
a CPU model for the Neoverse-V1, and enable it for the virt and
sbsa-ref boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We already squash the ID register field for FEAT_SPE (the Statistical
Profiling Extension) because TCG does not implement it and if we
advertise it to the guest the guest will crash trying to look at
non-existent system registers. Do the same for some other features
which a real hardware Neoverse-V1 implements but which TCG doesn't:
* FEAT_TRF (Self-hosted Trace Extension)
* Trace Macrocell system register access
* Memory mapped trace
* FEAT_AMU (Activity Monitors Extension)
* FEAT_MPAM (Memory Partitioning and Monitoring Extension)
* FEAT_NV (Nested Virtualization)
Most of these, like FEAT_SPE, are "introspection/trace" type features
which QEMU is unlikely to ever implement. The odd-one-out here is
FEAT_NV -- we could implement that and at some point we probably
will.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-2-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In handle_interrupt() we use level as an index into the interrupt_vector[]
array. This is safe because we have checked it against env->config->nlevel,
but Coverity can't see that (and it is only true because each CPU config
sets its XCHAL_NUM_INTLEVELS to something less than MAX_NLEVELS), so it
complains about a possible array overrun (CID 1507131)
Add an assert() which will make Coverity happy and catch the unlikely
case of a mis-set XCHAL_NUM_INTLEVELS in future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-id: 20230623154135.1930261-1-peter.maydell@linaro.org
AwSRAMCClass is larger than SysBusDeviceClass so the class size must be
advertised accordingly.
Fixes: 05def917e1 ("hw: arm: allwinner-sramc: Add SRAM Controller support for R40")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230628110905.38125-1-akihiko.odaki@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This code is only relevant when TCG is present in the build. Building
with --disable-tcg --enable-xen on an x86 host we get:
$ ../configure --target-list=x86_64-softmmu,aarch64-softmmu --disable-tcg --enable-xen
$ make -j$(nproc)
...
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `m_sysreg_ptr':
../target/arm/gdbstub.c:358: undefined reference to `arm_v7m_get_sp_ptr'
../target/arm/gdbstub.c:361: undefined reference to `arm_v7m_get_sp_ptr'
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `arm_gdb_get_m_systemreg':
../target/arm/gdbstub.c:405: undefined reference to `arm_v7m_mrs_control'
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230628164821.16771-1-farosas@suse.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following are done to fix the coverity issues:
1. Change read_data to fix the CID 1512899: Out-of-bounds access (OVERRUN)
2. Fix match_rx_tx_data to fix CID 1512900: Logically dead code (DEADCODE)
3. Replace rand() in generate_random_data() with g_rand_int()
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Message-id: 20230628202758.16398-1-vikram.garhwal@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike architectures with precise self-modifying code semantics
(e.g. x86) ARM processors do not maintain coherency for instruction
execution and memory, requiring an instruction synchronization
barrier on every core that will execute the new code, and on many
models also the explicit use of cache management instructions.
While this is required to make JITs work on actual hardware, QEMU
has gotten away with not handling this since it does not emulate
caches, and unconditionally invalidates code whenever the softmmu
or the user-mode page protection logic detects that code has been
modified.
Unfortunately the latter does not work in the face of dual-mapped
code (a common W^X workaround), where one page is executable and
the other is writable: user-mode has no way to connect one with the
other as that is only known to the kernel and the emulated
application.
This commit works around the issue by telling software that
instruction cache invalidation is required by clearing the
CPR_EL0.DIC flag (regardless of whether the emulated processor
needs it), and then invalidating code in IC IVAU instructions.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1034
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: John Högberg <john.hogberg@ericsson.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 168778890374.24232.3402138851538068785-1@git.sr.ht
[PMM: removed unnecessary AArch64 feature check; moved
"clear CTR_EL1.DIC" code up a bit so it's not in the middle
of the vfp/neon related tests]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the outer product set of insns, which take an entire matrix
tile as output, the argument is not a combined tile+column.
Therefore using get_tile_rowcol was incorrect, as we extracted
the tile number from itself.
The test case relies only on assembler support for SME, since
no release of GCC recognizes -march=armv9-a+sme yet.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped now-unneeded changes to sysregs CFLAGS]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always print each matrix row whole, one per line, so that we
get the entire matrix in the proper shape.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the line length to extend to 548 columns. While annoyingly wide,
it's still less confusing than the continuations we print. Also, the
default VL used by Linux (and max for A64FX) uses only 140 columns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some assemblers will complain about attempts to access
id_aa64zfr0_el1 and id_aa64smfr0_el1 by name if the test
binary isn't built for the right processor type:
/tmp/ccASXpLo.s:782: Error: selected processor does not support system register name 'id_aa64zfr0_el1'
/tmp/ccASXpLo.s:829: Error: selected processor does not support system register name 'id_aa64smfr0_el1'
However, these registers are in the ID space and are guaranteed to
read-as-zero on older CPUs, so the access is both safe and sensible.
Switch to using the S syntax, as we already do for ID_AA64ISAR2_EL1
and ID_AA64MMFR2_EL1. This allows us to drop the HAS_ARMV9_SME check
and the makefile machinery to adjust the CFLAGS for this test, so we
don't rely on having a sufficiently new compiler to be able to check
these registers.
This means we're actually testing the SME ID register: no released
GCC yet recognizes -march=armv9-a+sme, so that was always skipped.
It also avoids a future problem if we try to switch the "do we have
SME support in the toolchain" check from "in the compiler" to "in the
assembler" (at which point we would otherwise run into the above
errors).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change status of 9p from 'Odd Fixes' to 'Maintained', as this better
reflects current situation. I already take care of 9p patches for a
while, which included new features as well.
Based-on: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <E1qGKgV-0003Hj-01@lizzy.crudebyte.com>
As recent CVE-2023-2861 (fixed by f6b0de53fb) once again showed, the 9p
'proxy' fs driver is in bad shape. Using the 'proxy' backend was already
discouraged for safety reasons before and we recommended to use the
'local' backend (preferably in conjunction with its 'mapped' security
model) instead, but now it is time to officially deprecate the 'proxy'
backend.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
When QEMU is built with --enable-modules, the module_block.py script
parses block/*.c to find block drivers that are built as modules. The
script generates a table of block drivers called block_driver_modules[].
This table is used for block driver module loading.
The blkio.c driver uses macros to define its BlockDriver structs. This
was done to avoid code duplication but the module_block.py script is
unable to parse the macro. The result is that libblkio-based block
drivers can be built as modules but will not be found at runtime.
One fix is to make the module_block.py script or build system fancier so
it can parse C macros (e.g. by parsing the preprocessed source code). I
chose not to do this because it raises the complexity of the build,
making future issues harder to debug.
Keep things simple: use the macro to avoid duplicating BlockDriver
function pointers but define .format_name and .protocol_name manually
for each BlockDriver. This way the module_block.py is able to parse the
code.
Also get rid of the block driver name macros (e.g. DRIVER_IO_URING)
because module_block.py cannot parse them either.
Fixes: fd66dbd424 ("blkio: add libblkio block driver")
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230704123436.187761-1-stefanha@redhat.com
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The current sbsa-ref cannot use EHCI controller which is only
able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB.
Hence, this uses XHCI to provide a usb controller with 64-bit
DMA capablity instead of EHCI.
We bump the platform version to 0.3 with this change. Although the
hardware at the USB controller address changes, the firmware and
Linux can both cope with this -- on an older non-XHCI-aware
firmware/kernel setup the probe routine simply fails and the guest
proceeds without any USB. (This isn't a loss of functionality,
because the old USB controller never worked in the first place.) So
we can call this a backwards-compatible change and only bump the
minor version.
Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn
[PMM: tweaked commit message; add line to docs about what
changes in platform version 0.3]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some registers whose 'cooked' writefns induce TLB maintenance do
not have raw_writefn ops defined. If only the writefn ops is set
(ie. no raw_writefn is provided), it is assumed the cooked also
work as the raw one. For those registers it is not obvious the
tlb_flush works on KVM mode so better/safer setting the raw write.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- clean up gitlab artefact handling
- ensure gitlab publishes artefacts with coverage data
- reduce testing scope for coverage job
- mention CI pipeline in developer docs
- add ability to add plugin args to check-tcg
- fix some memory leaks and UB in tests
- suppress xcb leaks from fuzzing output
- add a test-fuzz to mirror the CI run
- allow lci-refresh to be run in $SRC
- update lcitool to latest version
- add qemu-minimal package set with gcc-native
- convert riscv64-cross to lcitool
- update sbsa-ref tests
- don't include arm_casq_ptw emulation unless TCG
- convert plugins to use g_memdup2
- ensure plugins instrument SVE helper mem access
- improve documentation of QOM/QDEV
- make gdbstub send stop responses when it should
- report user-mode pid in gdbstub
- add support for info proc mappings in gdbstub
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmSiuH4ACgkQ+9DbCVqe
KkRt0Qf+N0oD/VuEcRSxK1bWlLtf5nxQpPKKzkRItPc5jqJnLWa/gh21sfQgs5Uq
BczAT+JfgTnMozbq0mjvQ+uAGI4MHzBs+UAn60+ZcXfk2inyk77XKBEoHOFuK1ry
rgQ4+p21/hcZedDiDLnLSfbGfUU0KkM/pbAegOz7HO0EQDV0CSXqeAW3WAuM1lne
+YmXkKwoFI1V8HvslzCT12GFiaUfmSSBtASqWcf67Ief97K24+rpkAVM7JChLm5X
fC1MOFNuNYV+jO+9U3KIs15P1WH12oMcpNUY+KqQ5ZWovBg83yOLtKY1o3f6Z2Y+
iQgFJr6F8ZVBdKNJtqVi8DkbiFfbsA==
=Ho/h
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-ominbus-030723-1' of https://gitlab.com/stsquad/qemu into staging
maintainer updates: testing, fuzz, plugins, docs, gdbstub
- clean up gitlab artefact handling
- ensure gitlab publishes artefacts with coverage data
- reduce testing scope for coverage job
- mention CI pipeline in developer docs
- add ability to add plugin args to check-tcg
- fix some memory leaks and UB in tests
- suppress xcb leaks from fuzzing output
- add a test-fuzz to mirror the CI run
- allow lci-refresh to be run in $SRC
- update lcitool to latest version
- add qemu-minimal package set with gcc-native
- convert riscv64-cross to lcitool
- update sbsa-ref tests
- don't include arm_casq_ptw emulation unless TCG
- convert plugins to use g_memdup2
- ensure plugins instrument SVE helper mem access
- improve documentation of QOM/QDEV
- make gdbstub send stop responses when it should
- report user-mode pid in gdbstub
- add support for info proc mappings in gdbstub
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmSiuH4ACgkQ+9DbCVqe
# KkRt0Qf+N0oD/VuEcRSxK1bWlLtf5nxQpPKKzkRItPc5jqJnLWa/gh21sfQgs5Uq
# BczAT+JfgTnMozbq0mjvQ+uAGI4MHzBs+UAn60+ZcXfk2inyk77XKBEoHOFuK1ry
# rgQ4+p21/hcZedDiDLnLSfbGfUU0KkM/pbAegOz7HO0EQDV0CSXqeAW3WAuM1lne
# +YmXkKwoFI1V8HvslzCT12GFiaUfmSSBtASqWcf67Ief97K24+rpkAVM7JChLm5X
# fC1MOFNuNYV+jO+9U3KIs15P1WH12oMcpNUY+KqQ5ZWovBg83yOLtKY1o3f6Z2Y+
# iQgFJr6F8ZVBdKNJtqVi8DkbiFfbsA==
# =Ho/h
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 03 Jul 2023 02:01:02 PM CEST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-ominbus-030723-1' of https://gitlab.com/stsquad/qemu: (38 commits)
tests/tcg: Add a test for info proc mappings
docs: Document security implications of debugging
gdbstub: Add support for info proc mappings
gdbstub: Report the actual qemu-user pid
gdbstub: Expose gdb_get_process() and gdb_get_first_cpu_in_process()
linux-user: Emulate /proc/self/smaps
linux-user: Add "safe" parameter to do_guest_openat()
linux-user: Expose do_guest_openat() and do_guest_readlink()
gdbstub: clean-up vcont handling to avoid goto
gdbstub: Permit reverse step/break to provide stop response
gdbstub: lightly refactor connection to avoid snprintf
docs/devel: introduce some key concepts for QOM development
docs/devel: split qom-api reference into new file
docs/devel/qom.rst: Correct code style
include/hw/qdev-core: fixup kerneldoc annotations
include/migration: mark vmstate_register() as a legacy function
docs/devel: add some front matter to the devel index
plugins: update lockstep to use g_memdup2
plugins: fix memory leak while parsing options
plugins: force slow path when plugins instrument memory ops
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-9-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-39-alex.bennee@linaro.org>
Now that the GDB stub explicitly implements reading host files (note
that it was already possible by changing the emulated code to open and
read those files), concerns may arise that it undermines security.
Document the status quo, which is that the users are already
responsible for securing the GDB connection themselves.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621203627.1808446-8-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-38-alex.bennee@linaro.org>
Currently the GDB's generate-core-file command doesn't work well with
qemu-user: the resulting dumps are huge [1] and at the same time
incomplete (argv and envp are missing). The reason is that GDB has no
access to proc mappings and therefore has to fall back to using
heuristics for discovering them. This is, in turn, because qemu-user
does not implement the Host I/O feature of the GDB Remote Serial
Protocol.
Implement vFile:{open,close,pread,readlink} and also
qXfer:exec-file:read+. With that, generate-core-file begins to work on
aarch64 and s390x.
[1] https://sourceware.org/pipermail/gdb-patches/2023-May/199432.html
Co-developed-by: Dominik 'Disconnect3d' Czarnota <dominik.b.czarnota@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-7-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-37-alex.bennee@linaro.org>
Currently qemu-user reports pid 1 to GDB. Resolve the TODO and report
the actual PID. Using getpid() relies on the assumption that there is
only one GDBProcess. Add an assertion to make sure that future changes
don't break it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-6-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-36-alex.bennee@linaro.org>
These functions will be needed by user-target.c in order to retrieve
the name of the executable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-5-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-35-alex.bennee@linaro.org>
/proc/self/smaps is an extension of /proc/self/maps: it provides the
same lines, plus additional information about each range.
GDB uses /proc/self/smaps when available, which means that
generate-core-file tries it first before falling back to
/proc/self/maps. This, in turn, causes it to dump the host mappings,
since /proc/self/smaps is not emulated and is just passed through.
Fix by emulating /proc/self/smaps. Provide true values only for
Size, KernelPageSize, MMUPageSize and VmFlags. Leave all other values
at 0, which is a valid conservative estimate.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-34-alex.bennee@linaro.org>
gdbstub cannot meaningfully handle QEMU_ERESTARTSYS, and it doesn't
need to. Add a parameter to do_guest_openat() that makes it use
openat() instead of safe_openat(), so that it becomes usable from
gdbstub.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-33-alex.bennee@linaro.org>
These functions will be required by the GDB stub in order to provide
the guest view of /proc to GDB.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-32-alex.bennee@linaro.org>
