Commit Graph

92828 Commits

Author SHA1 Message Date
Daniel P. Berrangé
de72c4b7cd edid: set default resolution to 1280x800 (WXGA)
Currently QEMU defaults to a resolution of 1024x768 when exposing EDID
info to the guest OS. The EDID default info is important as this will
influence what resolution many guest OS will configure the screen with
on boot. It can also potentially influence what resolution the firmware
will configure the screen with, though until very recently EDK2 would
not handle EDID info.

One important thing to bear in mind is that the default graphics card
driver provided by Windows will leave the display set to whatever
resolution was enabled by the firmware on boot. Even if sufficient
VRAM is available, the resolution can't be changed without installing
new drivers. IOW, the default resolution choice is quite important
for usability of Windows.

Modern real world monitor hardware for desktop/laptop has supported
resolutions higher than 1024x768 for a long time now, perhaps as long
as 15+ years. There are quite a wide variety of native resolutions in
use today, however, and in wide screen form factors the height may not
be all that tall.

None the less, it is considered that there is scope for making the
QEMU default resolution slightly larger.

In considering what possible new default could be suitable, choices
considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA).

In many ways, vertical space is the most important, and so 720p was
discarded due to loosing vertical space, despite being 25% wider.

The SXGA resolution would be good, but when taking into account
window titlebars/toolbars and window manager desktop UI, this might
be a little too tall for some users to fit the guest on their physical
montior.

This patch thus suggests a modest change to 1280x800 (WXGA). This
only consumes 1 MB per colour channel, allowing double buffered
framebuffer in 8 MB of VRAM. Width wise this is 25% larger than
QEMU's current default, but height wise this only adds 5%, so the
difference isn't massive on the QEMU side.

Overall there doesn't appear to be a compelling reason to stick
with 1024x768 resolution.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211129140508.1745130-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:59:16 +01:00
Philippe Mathieu-Daudé
7336c94434 hw/mips/jazz: Inline vga_mmio_init() and remove it
vga_mmio_init() is used only one time and not very helpful,
inline and remove it.

Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-5-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:58:54 +01:00
Philippe Mathieu-Daudé
23f6e3b11b hw/display/vga-mmio: QOM'ify vga_mmio_init() as TYPE_VGA_MMIO
Introduce TYPE_VGA_MMIO, a sysbus device.

While there is no change in the vga_mmio_init()
interface, this is a migration compatibility break
of the MIPS Acer Pica 61 Jazz machine (pica61).

Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:58:54 +01:00
Philippe Mathieu-Daudé
6bd06f7731 hw/display/vga-mmio: Inline vga_mm_init()
Inline vga_mm_init() in vga_mmio_init() to simplify the
next patch review. Kind of.

Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:58:54 +01:00
Philippe Mathieu-Daudé
3ac25236ea hw/display: Rename VGA_ISA_MM -> VGA_MMIO
There is no ISA bus part in the MMIO VGA device, so rename:

 *  hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
 *  CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
 *  ISAVGAMMState -> VGAMmioState
 *  isa_vga_mm_init() -> vga_mmio_init()

Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:58:54 +01:00
Gerd Hoffmann
1c6c0b9ec1 uas: add missing return
Otherwise we run the error handling code even for successful requests.

Fixes: 13b250b12a ("uas: add stream number sanity checks.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211210080659.2537084-1-kraxel@redhat.com>
2022-01-13 10:58:05 +01:00
Marc-André Lureau
87800d9405 ui: fix gtk clipboard clear assertion
When closing the QEMU Gtk display window, it can occasionaly warn:
qemu-system-x86_64: Gtk: gtk_clipboard_set_with_data: assertion 'targets != NULL' failed

#3  0x00007ffff4f02f22 in gtk_clipboard_set_with_data (clipboard=<optimized out>, targets=<optimized out>, n_targets=<optimized out>, get_func=<optimized out>, clear_func=<optimized out>, user_data=<optimized out>) at /usr/src/debug/gtk3-3.24.30-4.fc35.x86_64/gtk/gtkclipboard.c:672
#4  0x00007ffff552cd75 in gd_clipboard_update_info (gd=0x5555579a9e00, info=0x555557ba4b50) at ../ui/gtk-clipboard.c:98
#5  0x00007ffff552ce00 in gd_clipboard_notify (notifier=0x5555579aaba8, data=0x7fffffffd720) at ../ui/gtk-clipboard.c:128
#6  0x000055555603e0ff in notifier_list_notify (list=0x555556657470 <clipboard_notifiers>, data=0x7fffffffd720) at ../util/notify.c:39
#7  0x000055555594e8e0 in qemu_clipboard_update (info=0x555557ba4b50) at ../ui/clipboard.c:54
#8  0x000055555594e840 in qemu_clipboard_peer_release (peer=0x55555684a5b0, selection=QEMU_CLIPBOARD_SELECTION_PRIMARY) at ../ui/clipboard.c:40
#9  0x000055555594e786 in qemu_clipboard_peer_unregister (peer=0x55555684a5b0) at ../ui/clipboard.c:19
#10 0x000055555595f044 in vdagent_disconnect (vd=0x55555684a400) at ../ui/vdagent.c:852
#11 0x000055555595f262 in vdagent_chr_fini (obj=0x55555684a400) at ../ui/vdagent.c:908

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211216083233.1166504-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:57:43 +01:00
Marc-André Lureau
fc94d1159c ui/dbus: fix buffer-overflow detected by ASAN
On the last added dbus patch, I left a tiny BO:

==441487==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x611000025a70 at pc 0x7f0817bb764c bp 0x7ffde672ae60 sp 0x7ffde672ae58
WRITE of size 8 at 0x611000025a70 thread T0
    #0 0x7f0817bb764b in dbus_vc_class_init ../ui/dbus.c:401

A cookie for ASAN! not you C :)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Fixes: 7f767ca35e ("ui/dbus: register D-Bus VC handler")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211222144032.443424-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:48:43 +01:00
Volker Rümelin
ecd5f2882f hw/audio/intel-hda: fix stream reset
Quote from:
High Definition Audio Specification 1.0a, section 3.3.35

Offset 80: {IOB}SDnCTL Stream Reset (SRST): Writing a 1 causes
the corresponding stream to be reset. The Stream Descriptor
registers (except the SRST bit itself) ... are reset.

Change the code to reset the Stream Descriptor Control and Status
registers except the SRST bit.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/757
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:47:52 +01:00
Volker Rümelin
9d90ceb274 dsoundaudio: fix crackling audio recordings
Audio recordings with the DirectSound backend don't sound right.
A look a the Microsoft online documentation tells us why.

From the DirectSound Programming Guide, Capture Buffer Information:
'You can safely copy data from the buffer only up to the read
cursor.'

Change the code to read up to the read cursor instead of the
capture cursor.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:47:52 +01:00
Volker Rümelin
ead789eb46 jackaudio: use ifdefs to hide unavailable functions
On Windows the jack_set_thread_creator() function and on MacOS the
pthread_setname_np() function with a thread pointer paramater is
not available. Use #ifdefs to remove the jack_set_thread_creator()
function call and the qjack_thread_creator() function in both
cases.

The qjack_thread_creator() function just sets the name of the
created thread for debugging purposes and isn't really necessary.

From the jack_set_thread_creator() documentation:
(...)

No normal application/client should consider calling this. (...)

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/785
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20211226154017.6067-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:47:52 +01:00
Rao Lei
1dbbe6f172 ui/vnc.c: Fixed a deadlock bug.
The GDB statck is as follows:
(gdb) bt
0  __lll_lock_wait (futex=futex@entry=0x56211df20360, private=0) at lowlevellock.c:52
1  0x00007f263caf20a3 in __GI___pthread_mutex_lock (mutex=0x56211df20360) at ../nptl/pthread_mutex_lock.c:80
2  0x000056211a757364 in qemu_mutex_lock_impl (mutex=0x56211df20360, file=0x56211a804857 "../ui/vnc-jobs.h", line=60)
    at ../util/qemu-thread-posix.c:80
3  0x000056211a0ef8c7 in vnc_lock_output (vs=0x56211df14200) at ../ui/vnc-jobs.h:60
4  0x000056211a0efcb7 in vnc_clipboard_send (vs=0x56211df14200, count=1, dwords=0x7ffdf1701338) at ../ui/vnc-clipboard.c:138
5  0x000056211a0f0129 in vnc_clipboard_notify (notifier=0x56211df244c8, data=0x56211dd1bbf0) at ../ui/vnc-clipboard.c:209
6  0x000056211a75dde8 in notifier_list_notify (list=0x56211afa17d0 <clipboard_notifiers>, data=0x56211dd1bbf0) at ../util/notify.c:39
7  0x000056211a0bf0e6 in qemu_clipboard_update (info=0x56211dd1bbf0) at ../ui/clipboard.c:50
8  0x000056211a0bf05d in qemu_clipboard_peer_release (peer=0x56211df244c0, selection=QEMU_CLIPBOARD_SELECTION_CLIPBOARD)
    at ../ui/clipboard.c:41
9  0x000056211a0bef9b in qemu_clipboard_peer_unregister (peer=0x56211df244c0) at ../ui/clipboard.c:19
10 0x000056211a0d45f3 in vnc_disconnect_finish (vs=0x56211df14200) at ../ui/vnc.c:1358
11 0x000056211a0d4c9d in vnc_client_read (vs=0x56211df14200) at ../ui/vnc.c:1611
12 0x000056211a0d4df8 in vnc_client_io (ioc=0x56211ce70690, condition=G_IO_IN, opaque=0x56211df14200) at ../ui/vnc.c:1649
13 0x000056211a5b976c in qio_channel_fd_source_dispatch
    (source=0x56211ce50a00, callback=0x56211a0d4d71 <vnc_client_io>, user_data=0x56211df14200) at ../io/channel-watch.c:84
14 0x00007f263ccede8e in g_main_context_dispatch () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
15 0x000056211a77d4a1 in glib_pollfds_poll () at ../util/main-loop.c:232
16 0x000056211a77d51f in os_host_main_loop_wait (timeout=958545) at ../util/main-loop.c:255
17 0x000056211a77d630 in main_loop_wait (nonblocking=0) at ../util/main-loop.c:531
18 0x000056211a45bc8e in qemu_main_loop () at ../softmmu/runstate.c:726
19 0x000056211a0b45fa in main (argc=69, argv=0x7ffdf1701778, envp=0x7ffdf17019a8) at ../softmmu/main.c:50

From the call trace, we can see it is a deadlock bug.
vnc_disconnect_finish will acquire the output_mutex.
But, the output_mutex will be acquired again in vnc_clipboard_send.
Repeated locking will cause deadlock. So, I move
qemu_clipboard_peer_unregister() behind vnc_unlock_output();

Fixes: 0bf41cab93 ("ui/vnc: clipboard support")
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220105020808.597325-1-lei.rao@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:46:33 +01:00
zhenwei pi
7cd2cfa2e6 usb: allow max 8192 bytes for desc
A device of USB video class usually uses larger desc structure, so
use larger buffer to avoid failure. (dev-video.c is ready)

This is an unlikely code path:
1, during guest startup, guest tries to probe device.
2, run 'lsusb' command in guest(or other similar commands).

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220112015835.900619-1-pizhenwei@bytedance.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:22:37 +01:00
Dario Binacchi
5280117b1e hw/usb/dev-wacom: add missing HID descriptor
Linux need to fill up the HID descriptor in order to let the driver be
emulated. The descriptor was downloaded from [1]. The patch was tested
with evtest tool on top of qemu 5.2.0 with linux kernel 4.19.208.

[1] https://github.com/linuxwacom/wacom-hid-descriptors/tree/master/Wacom%20PenPartner

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Message-Id: <20220112090125.381364-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:22:00 +01:00
Peter Maydell
91f5f7a5df linux-user pull request 20220111
siginfo_t cleanup
 more prtctl() update
 target_struct.h cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmHd3/QSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748Dd8P/17YoylgR93nPL//v1hbd2lpENhhany/
 Oz3YDxETLmPPaMZtKCiMiZ5OtoojvD5PS4SrRDaaP+hfF+KdDIcLpIjMje1jonf+
 H9IDYUlDRym4ucYvK+ZwPzz/+rMq/iaYT8ih0XvPKjEmbewtWeuIFgmCo8a6fvxg
 Aci+r4NxfjUeN7nN8oltxUx4DbS1uEJEm+HDCxFxEh26fN0ab+0wiBl93swQ71MG
 OoHG8KNJTiLre4TBtqJCbVSDqTIq+aorwus9Fh4qwCsqZA0TesRlAcq+TjoSbc2m
 eAr5kcarxVhI/qLkRlq9epPn/GlULdzlU1YOuM5bOpdOwJlmeiQTlDKUG2CtQ4Ym
 kvzxkMNVyb5jfUzYHt0oJHPnHXGGCXNSVUQ5rL51igOQWCn/IJ89kmqhcyObPrTZ
 eFkjplkl+BvhwCJl1SgbMaTJxeI9iwR5jsZwwikTlNmyy2twh93lEPmWyJezYsln
 A8QxNOWBgSvitPriZqq5nYgTQ/uARtkMhrNjwKYF5NvWUF2Z3ps1S5IgRwk2W2r+
 LFldwPmDeUkxsTXtVE7IWGqFFZG1ttQ5wyfNq82Ft7Cdem8bhOmQ0fxQqa7YmUrU
 0EdNAQ/X9SIhjswy5+woArBTbybefDS3cY9ZUM3D/AOWe+gyFNktQ2UemDWXaPVf
 Xl5TF8k1Alko
 =/Z6c
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/lvivier-gitlab/tags/linux-user-for-7.0-pull-request' into staging

linux-user pull request 20220111
siginfo_t cleanup
more prtctl() update
target_struct.h cleanup

# gpg: Signature made Tue 11 Jan 2022 19:52:20 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/lvivier-gitlab/tags/linux-user-for-7.0-pull-request: (30 commits)
  linux-user: Implement capability prctls
  linux-user: Implement PR_SET_PDEATHSIG
  linux-user: Map signal number in PR_GET_PDEATHSIG
  linux-user: Do not special-case NULL for PR_GET_PDEATHSIG
  linux-user: Move target_struct.h generic definitions to generic/
  linux-user/arm: Move target_oabi_flock64 out of target_structs.h
  linux-user/xtensa: Use force_sig_fault
  linux-user/sparc: Use force_sig_fault
  linux-user/sh4: Use force_sig_fault
  linux-user/s390x: Use force_sig_fault
  linux-user/riscv: Use force_sig_fault
  linux-user/ppc: Use force_sig_fault
  linux-user/openrisc: Use force_sig_fault
  target/mips: Extract trap code into env->error_code
  target/mips: Extract break code into env->error_code
  linux-user/mips: Use force_sig_fault
  linux-user/mips: Improve do_break
  linux-user/microblaze: Fix SIGFPE si_codes
  linux-user/microblaze: Use force_sig_fault
  linux-user/m68k: Use force_sig_fault
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-12 11:51:47 +00:00
Peter Maydell
b37778b840 linux-user: Fix clang warning for nios2-linux-user code
The clang in Ubuntu 18.04 (10.0.0-4ubuntu1) produces a warning
on the code added in commit f5ef0e518d where we use a
shifted expression in a boolean context:

../../linux-user/elfload.c:2423:16: error: converting the result of '<<' to a boolean always evaluates to true [-Werror,-Wtautological-constant-compare]
    } else if (LO_COMMPAGE) {
               ^
../../linux-user/elfload.c:1102:22: note: expanded from macro 'LO_COMMPAGE'
#define LO_COMMPAGE  TARGET_PAGE_SIZE
                     ^
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/cpu-all.h:231:31: note: expanded from macro 'TARGET_PAGE_SIZE'
#define TARGET_PAGE_SIZE   (1 << TARGET_PAGE_BITS)
                              ^
1 error generated.

The warning is bogus because whether LO_COMMPAGE is zero or not
depends on compile-time ifdefs; shut the compiler up by adding
an explicit comparison to zero.

Fixes: f5ef0e518d ("linux-user/nios2: Map a real kuser page")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20220111082900.3341274-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-12 09:22:01 +00:00
Richard Henderson
4f4e5567f8 linux-user: Implement capability prctls
This is PR_CAPBSET_READ, PR_CAPBSET_DROP and the "legacy"
PR_CAP_AMBIENT PR_GET_SECUREBITS, PR_SET_SECUREBITS.

All of these arguments are integer values only, and do not
require mapping of values between host and guest.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
f746c65909 linux-user: Implement PR_SET_PDEATHSIG
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
1edebb36ea linux-user: Map signal number in PR_GET_PDEATHSIG
Convert the host signal number to guest signal number
before returning the value to the guest.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220106225738.103012-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
08f5f97349 linux-user: Do not special-case NULL for PR_GET_PDEATHSIG
The kernel does not special-case arg2 != NULL, so
neither should we.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
72f692694f linux-user: Move target_struct.h generic definitions to generic/
Most targets share the same generic ipc structure definitions.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220107042600.149852-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
ffe81d4398 linux-user/arm: Move target_oabi_flock64 out of target_structs.h
Place it next to copy_from/to_user_oabi_flock64, the only users,
inside the existing target-specific ifdef.  This leaves only
generic ipc structs in target_structs.h.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220107042600.149852-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
2dd4634963 linux-user/xtensa: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-25-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
ac80d8b151 linux-user/sparc: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-24-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
588c7a171b linux-user/sh4: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-23-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
8f0bebebd2 linux-user/s390x: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
8521cc21ad linux-user/riscv: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.  Fix missing PC from EXCP_DEBUG by
merging the case with EXCP_BREAKPOINT.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-21-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
d30e60e7b4 linux-user/ppc: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.  Fill in the missing PC for SIGTRAP.
The fault address for POWERPC_EXCP_ISI is nip exactly, not nip - 4.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
b600705669 linux-user/openrisc: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-19-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
0a3336f6fd target/mips: Extract trap code into env->error_code
Simplify cpu_loop by doing all of the decode in translate.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
6f3533dd1b target/mips: Extract break code into env->error_code
Simplify cpu_loop by doing all of the decode in translate.

This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16.  This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
73c0aa6a85 linux-user/mips: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and SIGFPE; use force_sig (SI_KERNEL) for EXCP_DSPDIS.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
bf19bdb8f3 linux-user/mips: Improve do_break
Rename to do_tr_or_bp, as per the kernel function.
Add a 'trap' argument, akin to the kernel's si_code, but clearer.
The return value is always 0, so change the return value to void.
Use force_sig and force_sig_fault.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
0b25c4a1f6 linux-user/microblaze: Fix SIGFPE si_codes
Fix a typo for ESR_EC_DIVZERO, which is integral not floating-point.
Fix the if ladder for decoding floating-point exceptions.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
23ae825ab7 linux-user/microblaze: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
71dc6f7488 linux-user/m68k: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
d08d6d66f6 linux-user/i386: Use force_sig, force_sig_fault
Replace the local gen_signal with the generic functions that match
how the kernel raises signals. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
1ade5b2fed linux-user/i386: Split out maybe_handle_vm86_trap
Reduce the number of ifdefs within cpu_loop().

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson
0edf34c93e linux-user/hppa: Set FPE_CONDTRAP for COND
This si_code was changed in 75abf64287cab, for linux 4.17.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:43 +01:00
Richard Henderson
6ac3bf1f55 linux-user: Remove TARGET_NSIGFPE
This define is unused, and we have no similar define for
the other signal sub-codes.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:43 +01:00
Richard Henderson
7337adeac0 linux-user/hppa: Use the proper si_code for PRIV_OPR, PRIV_REG, OVERFLOW
These si_codes have been properly set by the kernel since the beginning.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:43 +01:00
Richard Henderson
f64859684a linux-user/hppa: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.  Fill in the missing PC for SIGTRAP
and missing si_code for SIGBUS.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:43 +01:00
Richard Henderson
32e321861d linux-user/cris: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.  Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:43 +01:00
Richard Henderson
1c165977de linux-user/alpha: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:43 +01:00
Richard Henderson
d9c5d7cf4d linux-user/alpha: Set FPE_FLTUNK for gentrap ROPRAND
This si_code was changed in 4cc13e4f6d441, for linux 4.17.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:43 +01:00
Richard Henderson
d010b8bd93 linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap
These si_codes were changed in 535906c684fca, for linux 4.17.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:43 +01:00
Peter Maydell
7bb1272f40 Python pull request
Fixes for the tests that broke during vacation, plus a simple syntax fix
 for a python script.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+ber27ys35W+dsvQfe+BBqr8OQ4FAmHcwD8ACgkQfe+BBqr8
 OQ5tKhAAtpZRBJ2oy1/MkjfxhGwfNYDQnQc09E1yYK2Qg+EOKNq12bxm7jjum6sl
 qQecdOpBbG3mq2OdiqMMVE1XKguAySmU97N/C8FayyTGQx/I8wtboYZ28b5et9D7
 QyCF7S/twYYPGW7UD+OQQH7VzBjlRmWMFraseUCUYwVC029MBxwt4iom3EBtQsea
 12XrepA6TgyI11yzDfiESt6L1pSXeZU52l9+hAfD9Dwxx4C5YBTBhOOxK0+3xl/p
 C9jImiTBGKYdEXK7gwd6LRCOEevuvWFFfW9jRJAf0an/6EYrRCSGWKU5VfDmSvLk
 8Cu/V7qq55XnAhvEHe+f8n15NgJ+EXpZ7NnnqPW8KJDBotGhy1jqjqfrJAoRBr8M
 +0pLAIuokiyEeH9259zkSGBPZQ9mhvTree/WyfOi4B+sLC8AUYuFsmeOd/rc0tuV
 /ebBLQQXGtq5D4i6wU3Mjj9GsrEROfPGyFbdYy3zLyXeERTcmPTUyhhy8GnnO3XW
 Qmx/U79HnF1iO/5ySiVWVfcAoaF0t+fxezHAVdbVvJC7MAB7wOkXH7unbJjM5qqh
 dxsOruNxzLQl3P7+zGepUqPWqw/fjqdMKGIhCMjDB4q/zPytPV9mRAAb7XYwGXah
 JnyCEIQmFkVsvJ9rr3gaEXiFcDCxxzZ3NFYjufjl5wDKbVQ7xK0=
 =N2+z
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/python-pull-request' into staging

Python pull request

Fixes for the tests that broke during vacation, plus a simple syntax fix
for a python script.

# gpg: Signature made Mon 10 Jan 2022 23:24:47 GMT
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jsnow-gitlab/tags/python-pull-request:
  simplebench: Fix Python syntax error (reported by LGTM)
  python: update type hints for mypy 0.930
  Python/aqmp: fix type definitions for mypy 0.920
  python/aqmp: use absolute import statement

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-11 14:20:42 +00:00
Peter Maydell
64c01c7da4 SD/MMC patches queue
- Add SDHC support for SD card SPI-mode (Frank Chang)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmHaCHIACgkQ4+MsLN6t
 wN4sdhAAtGumw7ji0DOsVA7xP0jXi471NUaE5Y21OSsWWozbEqGpsF2cAkxSbY17
 CY0cMpQUl/NqbMz0h+GwE1E3EXAChTnQSsEkTmHrWrZOZceIK20ODgiIKFpj6tls
 jIN0mG4YXdo7/ODLO8F7G18zkvcwTTb0+sRA4EUQfAzNcyjWIKBR/0U0xY+cVfy6
 Y+UTk6+Vf01seS4BRVqE2mec4YMjRb/fKwnXdBgMVNf3OlRqfO0wBu6l/03rf0Mo
 GYwxSiDnmVZufLtSTRNL9wW4eQoDBhWrnzh7wTH6kSjNE/ylWLeZPg8uKkNC715h
 H4/k1srMHRpo8PcKOaGJ1VLR3iqAVY80MdBtFKtaFaDJQFkLT2aBUI1xREA9s4uo
 r6xUyfeMCb/d3l0n+gFX9+hv3LlzsfubvLT2FeIFp0K2YioG7upH0PV8eiG7okKf
 AiEvidr8gU1RFk/JUWQDUsqbInpo92INk88jDsrpsgXS74RoYe5T4tR6pIjDXe8s
 dKF3RdQzC0TcgW1uqobduMtrumwEhiY4WKeQvhaKQF1v1JcTQRLqrds3qHhPCayN
 NiyFfue43mtZllUZw0NnezbNsiY+Fgepg4DSqvPHzszdsMHmmY7bs0mx79JoJglN
 mH1xurwjo3Mvv9oeBwP1OcRM7IS4Oz/ALhi0ZNbP+MYwDGwujXU=
 =PEEr
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20220108' into staging

SD/MMC patches queue

- Add SDHC support for SD card SPI-mode (Frank Chang)

# gpg: Signature made Sat 08 Jan 2022 21:56:02 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/sdmmc-20220108:
  hw/sd: Add SDHC support for SD card SPI-mode
  hw/sd/sdcard: Rename Write Protect Group variables

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-11 11:39:31 +00:00
Peter Maydell
bf99e0ec9a virtio: revert config interrupt changes
Lots of fallout from config interrupt changes. Author wants to rework
 the patches. Let's revert quickly so others don't suffer meanwhile.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmHcnzAPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpPQEH/2Kwx1xc8P3U4UULco1VlQ//mC0l0QBJTVpt
 qrt0HFEmXvO8G//ybWeqiwGO88aZ4oaskQN4JxnqJ+QmRp8VA7XDM1QyH6lNdIzt
 tT0xay5QXn/fOZIPwzRYJMqnvrei2mkeIIT60E9BBqVL/c+r3bHGkzmE1sFBSE14
 k/el3le/FJ7eaxU8WnddoIxjKmc9R6xpno96TRiAphdsI7OizHvaMYJ4swE+yQ21
 UHoZkkrJxE3RV7t99CQXHAA2FZIjVtPOegro0t+7a1/EqxRtKkuUJIJSpFWThbWf
 I95BGx8m8g+sDqUYSf6wLR57PQLcOUC1aQqP5N1bptAmyKgR+1I=
 =yQ3c
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio: revert config interrupt changes

Lots of fallout from config interrupt changes. Author wants to rework
the patches. Let's revert quickly so others don't suffer meanwhile.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 10 Jan 2022 21:03:44 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  Revert "virtio: introduce macro IRTIO_CONFIG_IRQ_IDX"
  Revert "virtio-pci: decouple notifier from interrupt process"
  Revert "virtio-pci: decouple the single vector from the interrupt process"
  Revert "vhost: introduce new VhostOps vhost_set_config_call"
  Revert "vhost-vdpa: add support for config interrupt"
  Revert "virtio: add support for configure interrupt"
  Revert "vhost: add support for configure interrupt"
  Revert "virtio-net: add support for configure interrupt"
  Revert "virtio-mmio: add support for configure interrupt"
  Revert "virtio-pci: add support for configure interrupt"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-11 10:12:29 +00:00
Stefan Weil
9ebfc5a583 simplebench: Fix Python syntax error (reported by LGTM)
Fixes: b2fcb0c575
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20220107153019.504124-1-sw@weilnetz.de
Signed-off-by: John Snow <jsnow@redhat.com>
2022-01-10 18:23:10 -05:00