There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.
Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.
The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].
The bsd-user headers remain unchanged as I don't know if they are wrong
or not.
[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
linux-user/mips/cpu_loop.c: In function ‘cpu_loop’:
linux-user/mips/cpu_loop.c:104:24: warning: this statement may fall through [-Wimplicit-fallthrough=]
104 | if ((ret = get_user_ual(arg8, sp_reg + 28)) != 0) {
| ^
linux-user/mips/cpu_loop.c:107:17: note: here
107 | case 7:
| ^~~~
linux-user/mips/cpu_loop.c:108:24: warning: this statement may fall through [-Wimplicit-fallthrough=]
108 | if ((ret = get_user_ual(arg7, sp_reg + 24)) != 0) {
| ^
linux-user/mips/cpu_loop.c:111:17: note: here
111 | case 6:
| ^~~~
linux-user/mips/cpu_loop.c:112:24: warning: this statement may fall through [-Wimplicit-fallthrough=]
112 | if ((ret = get_user_ual(arg6, sp_reg + 20)) != 0) {
| ^
linux-user/mips/cpu_loop.c:115:17: note: here
115 | case 5:
| ^~~~
Add the corresponding "fall through" comment to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201030004046.2191790-5-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch introduces missing target types ('target_flag_t', 'target_cc_t',
'target_speed_t') in a few 'termibts.h' header files. Also, two missing
values ('TARGET_IUTF8' and 'TARGET_EXTPROC') were also added. These values
were also added in file 'syscall.c' in bitmask tables 'iflag_tbl[]' and
'lflag_tbl[]' which are used to convert values of 'struct termios' between
target and host.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200723210233.349690-3-Filip.Bozuta@syrmia.com>
[lv: keep TARGET_NCCS definition in xtensa/termbits.h]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscalls:
* mlock, munlock, mlockall, munlockall - lock and unlock memory
int mlock(const void *addr, size_t len)
int munlock(const void *addr, size_t len)
int mlockall(int flags)
int munlockall(void)
man page: https://man7.org/linux/man-pages/man2/mlock.2.html
Implementation notes:
Syscall mlockall() takes an argument that is composed of predefined values
which represent flags that determine the type of locking operation that is
to be performed. For that reason, a printing function "print_mlockall" was
stated in file "strace.list". This printing function uses an already existing
function "print_flags()" to print the "flags" argument. These flags are stated
inside an array "mlockall_flags" that contains values of type "struct flags".
These values are instantiated using an existing macro "FLAG_TARGET()" that
crates aproppriate target flag values based on those defined in files
'/target_syscall.h'. These target flag values were changed from
"TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set
and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT"
was added in this patch. This value was also added in "syscall.c" in function
"target_to_host_mlockall_arg()". Because this flag value was added in kernel
version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and
in "strace.c") as to support older kernel versions.
The other syscalls have only primitive argument types, so the
rest of the implementation was handled by stating an appropriate
printing format in file "strace.list". Syscall mlock2() is not implemented in
"syscall.c" and thus it's argument printing is not implemented in this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a script to update the file from strace github and run it
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-22-laurent@vivier.eu>
[lv: added file in MAINTAINERS]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-20-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/mips/kernel/syscalls/syscall_o32.tbl v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offset (4000) from the file to the Makefile.objs to be passed
to syscallhdr.sh
Rename on the fly fadvise64 to fadvise64_64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-17-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. Add an empty inline function for
each target, and invoke it from the proper places.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. To avoid confusion, rename the
one we have to make it clear it affects the child.
At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We should avoid including the whole of softfloat headers in cpu.h and
explicitly include it only where we will be calling softfloat
functions. We can use the -types.h in cpu.h for the few bits that are
global. We also move the restore_snan_bit_mode into internal.h and
include -helpers.h there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Structure ucontext for MIPS is defined in the following way in
Linux kernel:
(arch/mips/include/uapi/asm/ucontext.h, lines 54-64)
struct ucontext {
/* Historic fields matching asm-generic */
unsigned long uc_flags;
struct ucontext *uc_link;
stack_t uc_stack;
struct sigcontext uc_mcontext;
sigset_t uc_sigmask;
/* Extended context structures may follow ucontext */
unsigned long long uc_extcontext[0];
};
Fix the structure target_ucontext for MIPS to reflect the definition
above, except the correction for field uc_extcontext, which will
follow at some later time.
Fixes: 94c5495d
Reported-by: Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1562931470-3700-2-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Handle EXCP_FPE properly for MIPS in cpu loop.
Note that a vast majority of FP instructions are not affected by
the absence of the code in this patch, as they use alternative code
paths for handling floating point exceptions (see, for example,
invocations of update_fcr31()) - they rely on softfloat library for
keeping track on exceptions that needs to be raised. However, there
are few MIPS FP instructions (an example is CTC1) that use function
do_raise_exception() directly, and they need the case that is added
in this patch to propagate the FPE exception as designed.
The code is based on kernel's function force_fcr31_sig() in
arch/mips/kernel.traps.c.
Reported-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-6-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Bring target_flock definitions to be more in sync with the way
flock is defined in kernel.
Basically, the rules from the kernel are:
1. Majority of architectures have a common flock definition.
2. Architectures with 32-bit MIPS ABIs have a sligtly different
flock definition; those architectures are the only arcitectures
that have HAVE_ARCH_STRUCT_FLOCK defined, and that preprocessor
constant is used in the common header as a flag for including or
not including common flock definition.
3. Sparc architectures also have a sligtly different flock
definition, but the difference is only the padding at the end of
the structure. The presence of that padding is determined by
preprocessor constants __ARCH_FLOCK6_PAD and __ARCH_FLOCK64_PAD.
QEMU linux-user already implements rules 1. and 3. in a very
similar way as they are implemented in kernel. However, rule 2.
is implemented in a dissimilar way (for example, the constant
TARGET_HAVE_ARCH_STRUCT_FLOCK is missing), and this patch brings
QEMU implementation much closer to the kernel implementation.
TARGET_HAVE_ARCH_STRUCT_FLOCK64 constant is also introduced to
mimic HAVE_ARCH_STRUCT_FLOCK64 from kernel, but it is not defined
anywhere, however, this is the case with HAVE_ARCH_STRUCT_FLOCK64
in kernel as well.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-5-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Among MIPS ABIs, only MIPS O32 and N32 have special (different
than other architectures) definition of structure flock in kernel.
Bring target_flock definition in QEMU for MIPS O64 ABI to the
correct state, which is currently different than the most common
definition, and it should actually be the same.
Reported-by: Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Cleanup in the boilerplate that each target must define.
Replace mips_env_get_cpu with env_archcpu. The combination
CPU(mips_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Completely rewrite conditional stores handling. Use cmpxchg.
This eliminates need for separate implementations of SC instruction
emulation for user and system emulation.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.
Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).
This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Floating-point mode is calculated from MIPS.abiflags FP ABI value
(based on kernel implementation). Illegal combinations are rejected.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
This kind of ELF for the R5900 relies on an IEEE 754-1985 compliant FPU.
The R5900 FPU hardware is noncompliant and it is therefore emulated in
software by the Linux kernel. QEMU emulates a compliant FPU accordingly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add MIPS-specific prctl() options TARGET_PR_SET_FP_MODE and
TARGET_PR_SET_FP_MODE. These values are essentially copied from
linux kernel header include/uapi/linux/prctl.h.
This is done in a way consistent with a similar case of
aarch64-specific prctl() options TARGET_PR_SVE_SET_VL and
TARGET_PR_SVE_GET_VL.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
nanoMIPS is always NaN2008 compliant, and rules for checking
FCR31's NAN2008 bit are obsoleted.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Implement support for nanoMIPS LLWP/SCWP instructions. Beside
adding core functionality of these instructions, this patch adds
support for availability control via configuration bit XNP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Synchronize content of linux-user/mips/syscall_nr.h and
linux-user/mips64/syscall_nr.h with Linux kernel 4.18 headers.
This adds 9 new syscall numbers, the last being NR_io_pgetevents.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
add a per target target_fcntl.h and include the generic one from them
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
to be like in the kernel and rename it TARGET_ARCH_HAS_SOCKET_TYPES
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-7-laurent@vivier.eu>
No code change, only move code from main.c to
mips/cpu_loop.c.
Include mips/cpu_loop.c in mips64/cpu_loop.c
to avoid to duplicate code.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-8-laurent@vivier.eu>
Create a cpu_loop-common.h for future use by
these new files and use it in the existing
main.c
Introduce target_cpu_copy_regs():
declare the function in cpu_loop-common.h
and an empty function for each target,
to move all the cpu_loop prologues to this function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and call it only if the macro is defined.
Move declarations of setup_frame() and setup_rt_frame() to
linux-user/signal-common.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
No code change, only move code from signal.c to
mips/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
mips64/signal.c includes mips/signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-19-laurent@vivier.eu>
Create a signal-common.h for future use by these new files
and use it in the existing signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
So here we need to detect the version of binaries and set
cpu_model for it.
Signed-off-by: YunQiang Su <syq@debian.org>
[lv: original patch modified to move code into cpu_get_model()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180220173307.25125-5-laurent@vivier.eu>
Instead of a sequence of "#if ... #endif" move the
selection to a function in linux-user/*/target_elf.h
We can't add them in linux-user/*/target_cpu.h
because we will need to include "elf.h" to
use ELF flags with eflags, and including
"elf.h" in "target_cpu.h" introduces some
conflicts in elfload.c
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmbmhdosb9.fsf_-_@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
