In preparation for moving qmp-shell into the qemu.qmp package, make
QMPShellError inherit from QMPError so that all custom errors in this
package all derive from QMPError.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-39-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
They're not needed; single underscore is enough to express intent that
these methods are "internal". double underscore is used as a weak name
mangling, but that isn't beneficial for us here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-38-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The nice usage comment should be a docstring instead of a comment, so
that it's visible from other python tooling.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-37-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We are only anticipating QMPShellErrors here, for syntax we weren't able
to understand. Other errors, if any, should be allowed to percolate
upwards.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-36-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
calling "transaction( )" is pointless, but valid. Rework the parser to
allow this kind of invocation. This helps clean up exception handling
later by removing accidental breakages of the parser that aren't
explicitly forbidden.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-35-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We still want to revamp qmp-shell again, but there's much more to the
idea than the comment now intuits. Remove it.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-34-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A perfect candidate is non-fatal shell history messages.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-33-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We can invoke the shell history writing when we leave the QMPShell scope
instead of relying on atexit. Doing so may be preferable to avoid global
state being registered from within a class instead of from the
application logic directly.
Use QMP's context manager to hook this history saving at close time,
which gets invoked when we leave the context block.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-32-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Similar to verbose, there's no reason this needs to be hidden.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-30-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Don't "extend" QEMUMonitorProtocol by changing the argument types. Move
the string parsing just outside of the class instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-29-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As per my usual, this patch is annotations only. Any changes with side
effects are done elsewhere.
Note: pylint does not understand the subscripts for Collection in Python 3.6,
so use the stronger Sequence type as a workaround.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-28-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add an empty completer as a more type-safe placeholder instead of
'None'.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-26-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
list is a generic type, but we expect to use strings directly. We could
subclass list[str], but pylint does not presently understand that
invocation.
Change this class to envelop a list instead of *being* a list, for
simpler mypy typing.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-25-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I'm not sure when this regressed (Or maybe if it was ever working right
to begin with?), but the Python AST requires you to change "Names" to
"Constants" in order to truly convert `false` to `False`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-24-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of doing this in main, move it into the class itself. (This
makes it easier to put into the qemu.qmp package later by removing as
much as we can from the main() function.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-23-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's only ever used by one caller, we can just absorb that logic.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-22-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Small tidying; treat "prompt" like an immutable property instead of
function/method/routine.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-21-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
No real reason to hide this behind an underscore; make it part of the
initializer and make it a regular RW attribute.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's less useful, but it makes the initialization methods LSP
consistent, which quiets a mypy complaint.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Use argparse instead of an open-coded CLI parser, for consistency with
everything else.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A bit more idiomatic, and quiets some linter warnings.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Shushes pylint. I don't always mind these patterns personally, but I'm
not as sure that I want to remove the warning from pylint's repertoire
entirely. Oh well.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We want to remove exceptions that are too broad here; we only want to
catch IOErrors that get raised as a direct result of the open call.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A bit of churn and housekeeping for pylint, flake8 et al.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This function returns None when it doesn't find a match; do that
explicitly.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Not something I control, sorry, pylint.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(2014 me had never written python before.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Linters get angry when we don't define state at init time.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Methods with no self-use should belong to the class.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Don't use 'qmp' here, which shadows the qmp module.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It needs to match the parent's signature -- the negotiate parameter must
be optional.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The signatures need to match.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A lot of fiddling around to get us below 80 columns.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add a little forwarder shim until we are sure that everyone is
comfortable with how to use the tools in their new packaged location.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The script itself will be unavailable for a few commits before being
restored, with no way to run it right after this commit. This helps move
git history into the new file. To prevent linter regressions, though, we
do need to immediately touch up the filename to remove dashes (to make
the module importable), and remove the executable bit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This script is in slightly rough shape, but it still works. A lot of
care went into its initial development. In good faith, I'm updating it
to the latest Python coding standards. If there is in interest in this
script, though, I'll be asking for a contributor to take care of it
further.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I'm only doing a very quick best-effort to preserve this script, to help
keep it from breaking further. I think there are pending ideas swirling
on the right way to implement better SDKs and better clients, and this
script might be a handy reference for those discussions. It presents
some interesting design problems, like static type safety when using a
dynamic RPC mechanism.
I believe it's worth preserving the effort and care that went into
making this script by updating it to work with our current
infrastructure. However, I am disabling the requirement for docstrings
in this file.
If you would like to help improve this script, please add docstrings
alongside any refactors or rejuvenations you might apply at that time.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Turn that nice usage comment into a docstring.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
optparse isn't supported anymore, it's from the python2 days. Replace it
with the mostly similar argparse.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Fixes: 50d189c
These error classes aren't available anymore. Fix the bitrot.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- Line length should be < 80
- You shouldn't perform unscoped imports except at the top of the module
Notably, the sys.path hack creates problems with the import rule. This
will be fixed later.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
By leaving the script absent for a commit, git-blame travels to the new
file instead of staying on the shim.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Move qom-fuse over to the python package now that it passes the
linter. Update the import paradigms so that it continues to pass in the
context of the Python package.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Because fusepy does not have type hints, add some targeted warning
suppressions.
Namely, we need to allow subclassing something of an unknown type (in
qom_fuse.py), and we need to allow missing imports (recorded against
fuse itself) because mypy will be unable to import fusepy (even when
installed) as it has no types nor type stubs available.
Note: Until now, it was possible to run invocations like 'mypy qemu/'
from ./python and have that work. However, these targeted suppressions
require that you run 'mypy -p qemu/' instead. The correct, canonical
invocation is recorded in ./python/tests/mypy.sh and all of the various
CI invocations always use this correct form.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- Use FuseOSError to signal ENOENT instead of returning it
- Wrap qom-get in str(), as we don't always know its type
- The empty return should be b'', not ''.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
the qom_list method provides a type-safe object that's easier to type
check, so switch to using it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Move qom-fuse onto the QOMCommand base established in
python/qemu/qmp/qom_common.py. The interface doesn't change
incompatibly, "qom-fuse mountpoint" still works as an invocation, and
QMP_SOCKET is still used as the environment variable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The methods inherited from fuse don't need docstrings; that's up to
fusepy to handle.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- Catch specific exceptions from QMP
- Reraise errors with explicit context
- method parameters should match parent's names
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
flake8 still has one warning because of the sys.path hack, but that will
be going away by the end of this patch series.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Hint: you can use symlinks to create qom_fuse.py in python/qemu/qmp/ and
point to scripts/qom-fuse to apply the standard linting rules to this
script.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Redirect to the new qom scripts. These forwarders can be deleted
eventually when there has been more time for the dust on the Python
packaging to settle and people understand how to find these commands.
Note: You can run these by setting $PYTHONPATH in your shell and then
running "python3 -m qemu.qmp.qom", or you can install the qemu namespace
package and use the "qom" or "qom-set" scripts.
I've written how to install the package elsewhere, but for the sake of
git-blame, cd to ./python, and then do:
- pip3 install [--user] [-e] .
--user will install to your local user install (will not work inside of
a venv), omitting this flag installs to your system-wide packages
(outside of a venv) or to your current virtual environment (inside the
venv).
When installing to a venv or to your system-wide packages, "qom"
should be in your $PATH already. If you do a user install, you may
need to add ~/.local/bin to your $PATH if you haven't already.
-e installs in editable mode: the installed package is effectively just
a symlink to this folder; so changes to your git working tree are
reflected in the installed package.
Note: installing these packages to an environment outside a venv can be
dangerous: Many QEMU scripts will begin to prefer the installed version
instead of the version directly in the tree. Use with caution. editable
mode is recommended when working outside of a venv.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This takes the place of qmp-shell's __get_address function. It also
allows other utilities to share the same parser and syntax for
specifying QMP locations.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We are going to reuse the script to generate a nbd_ function in
further commit. Prepare the script now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-28-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This script is what is used to generate the docs data table in:
docs/system/cpu-models-x86-abi.csv
It can be useful to run if adding new CPU models / versions and
the csv needs updating.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210607135843.196595-4-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Change the regex used to determine whether a file should be processed as
C source to include .c.inc and .h.inc extensions.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <20210520195142.941261-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
While we only use stdin, the chardev is named 'stdio'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210602170759.2500248-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This adds udmabuf header to standard headers so that the
relevant udmabuf objects can be accessed in subsequent
patches.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-3-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We can have a two-letter variable name, as a treat.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-15-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A generator suffices (and quiets a pylint warning).
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Annotations do not change runtime behavior.
This commit *only* adds annotations.
(Annotations for QAPIDoc are in a forthcoming commit.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-13-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
TypeGuards wont exist in Python proper until 3.10. Ah well. We can hack
up our own by declaring this function to return the type we claim it
checks for and using this to safely downcast object -> List[str].
In so doing, I bring this function under _pragma so it can use the
'info' object in its closure. Having done this, _pragma also now no
longer needs to take a 'self' parameter, so drop it.
To help with line-length, and with the context evident from its new
scope, rename the function to the shorter check_list_str().
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When the token can be None (EOF), we can't use 'x in "abc"' style
membership tests to group types of tokens together, because 'None in
"abc"' is a TypeError.
Easy enough to fix. (Use a tuple: It's neither a static typing error nor
a runtime error to check for None in Tuple[str, ...])
Add tests to prevent a regression. (Note: they cannot be added prior to
this fix, as the unhandled stack trace will not match test output in the
CI system.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mypy cannot generally understand that these regex functions cannot
possibly fail. Add a "must_match" helper that makes this clear for
mypy.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No self, no thank you!
(Quiets pylint warnings.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The single quote token implies the value is a string. Assert this to be
the case, to allow us to write an accurate return type for get_members.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Instead of using get_expr nested=False, allow get_expr to always return
any expression. In exchange, add a new error message to the top-level
parser that explains the semantic error: Top-level expressions must
always be JSON objects.
This helps mypy understand the rest of this function which assumes that
get_expr did indeed return a dict.
The exception type changes from QAPIParseError to QAPISemError as a
result, and the error message in two tests now changes.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The type checker can't narrow the type of the token value to string,
because it's only loosely correlated with the return token.
We know that a token of '#' should always have a "str" value.
Add an assertion.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For the sake of keeping __init__ smaller (and treating it more like a
gallery of what state variables we can expect to see), put the actual
parsing action into a parse method. It remains invoked from the init
method to reduce churn.
To accomplish this, @previously_included becomes the private data
member ._included, and the filename is stashed as ._fname.
Add any missing declarations to the init method, and group them by
function so they can be understood quickly at a glance.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
With the QAPISourceInfo(None, None, None) construct gone, there's no
longer any reason to have to specify that a file starts on the first
line. Remove it from the initializer and default it to 1.
Remove the last vestiges where we check for 'line' being unset, that
can't happen, now.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fixes: f5d4361cda
Fixes: 52a474180a
Fixes: 46f49468c6
Remove the try/except block that handles file-opening errors in
QAPISchemaParser.__init__() and add one each to
QAPISchemaParser._include() and QAPISchema.__init__() respectively.
This simultaneously fixes the typing of info.fname (f5d4361cda), A
static typing violation in test-qapi (46f49468c6), and a regression of
an error message (52a474180a).
The short-ish version of what motivates this patch is:
- It's hard to write a good error message in the init method,
because we need to determine the context of our caller to do so.
It's easier to just let the caller write the message.
- We don't want to allow QAPISourceInfo(None, None, None) to exist. The
typing introduced by commit f5d4361cda types the 'fname' field as
(non-optional) str, which was premature until the removal of this
construct.
- Errors made using such an object are currently incorrect (since
52a474180a)
- It's not technically a semantic error if we cannot open the schema.
- There are various typing constraints that make mixing these two cases
undesirable for a single special case.
- test-qapi's code handling an fname of 'None' is now dead, drop it.
Additionally, Not all QAPIError objects have an 'info' field (since
46f49468), so deleting this stanza corrects a typing oversight in
test-qapi introduced by that commit.
Other considerations:
- open() is moved to a 'with' block to ensure file pointers are
cleaned up deterministically.
- Python 3.3 deprecated IOError and made it a synonym for OSError.
Avoid the misleading perception these exception handlers are
narrower than they really are.
The long version:
The error message here is incorrect (since commit 52a474180a):
> python3 qapi-gen.py 'fake.json'
qapi-gen.py: qapi-gen.py: can't read schema file 'fake.json': No such file or directory
In pursuing it, we find that QAPISourceInfo has a special accommodation
for when there's no filename. Meanwhile, the intent when QAPISourceInfo
was typed (f5d4361cda) was non-optional 'str'. This usage was
overlooked.
To remove this, I'd want to avoid having a "fake" QAPISourceInfo
object. I also don't want to explicitly begin accommodating
QAPISourceInfo itself being None, because we actually want to eventually
prove that this can never happen -- We don't want to confuse "The file
isn't open yet" with "This error stems from a definition that wasn't
defined in any file".
(An earlier series tried to create a dummy info object, but it was tough
to prove in review that it worked correctly without creating new
regressions. This patch avoids that distraction. We would like to first
prove that we never raise QAPISemError for any built-in object before we
add "special" info objects. We aren't ready to do that yet.)
So, which way out of the labyrinth?
Here's one way: Don't try to handle errors at a level with "mixed"
semantic contexts; i.e. don't mix inclusion errors (should report a
source line where the include was triggered) and command line errors
(where we specified a file we couldn't read).
Remove the error handling from the initializer of the parser. Pythonic!
Now it's the caller's job to figure out what to do about it. Handle the
error in QAPISchemaParser._include() instead, where we can write a
targeted error message where we are guaranteed to have an 'info' context
to report with.
The root level error can similarly move to QAPISchema.__init__(), where
we know we'll never have an info context to report with, so we use a
more abstract error type.
Now the error looks sensible again:
> python3 qapi-gen.py 'fake.json'
qapi-gen.py: can't read schema file 'fake.json': No such file or directory
With these error cases separated, QAPISourceInfo can be solidified as
never having placeholder arguments that violate our desired types. Clean
up test-qapi along similar lines.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210519183951.3946870-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
checkfilename() doesn't always set $acpi_testexpected. Fix the following
warning:
Use of uninitialized value $acpi_testexpected in string eq at
./scripts/checkpatch.pl line 1529.
Fixes: d2f1af0e41 ("checkpatch: don't emit warning on newly created acpi data files")
Cc: isaku.yamahata@intel.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <161786467973.295167.5612704777283969903.stgit@bahia.lan>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Place all files that can be useful to rebuild the Coverity
configuration in scripts/coverity-scan: the existing model
file, and the components setup.
The Markdown syntax was tested with Pandoc (but in any case
is meant more as a human-readable reference than as a part
of documentation).
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to drop caches before each test run. It may probably
improve reliability of results when testing in cached mode.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Add arguments to set number of test runs per table cell and to disable
initial run that is not counted in results.
It's convenient to set --count 1 --no-initial-run to fast run test
onece, and to set --count to some large enough number for good
precision of the results.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Add support for qcow2 source. New option says to use test-source.qcow2
instead of test-source. Of course, test-source.qcow2 should be
precreated.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
We should not report success if there is an error in final event.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Allow benchmark with different kinds of target cache.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
statistics.stdev raises if sequence length is less than two. Support
that case by hand.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Sometimes one of cells in a testing table runs too slow. And we really
don't want to wait so long. Limit number of runs in this case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This patch fixes the update-binfmts templates being used in the script
scripts/qemu-binfmt-conf.sh when the option --debian is used.
Fixed issues are:
- Typo in flag 'credentials' (previously 'credential').
- Missing flags 'preserve' and 'fix_binary'.
Reference: https://manpages.debian.org/buster/binfmt-support/update-binfmts.8.en.html#FORMAT_FILES
Signed-off-by: Silvano Cirujano Cuesta <silvano.cirujano-cuesta@siemens.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210323123457.23747-1-silvano.cirujano-cuesta@siemens.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than force all structure members to be 'int',
allow the type of the member to be specified.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow '64' to be specified for the instruction width command line params
and use the appropriate extract and deposit functions in that case.
This will be used to implement the new 64-bit Power ISA 3.1 instructions.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <CP2PR80MB3668E123E2EFDB0ACD3A46F1DA759@CP2PR80MB3668.lamprd80.prod.outlook.com>
[rth: Drop the change to the field type; use bitop_width instead of separate
variables for extract/deposit; use "ull" for 64-bit constants.]
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Form a hex constant of the appropriate insnwidth.
Begin using f-strings on changed lines.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No functional change.
Note: QAPISourceError's info parameter is Optional[] because schema.py
treats the info property of its various classes as Optional to
accommodate built-in types, which have no source. See prior commit
'qapi/error: assert QAPISourceInfo is not None'.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Keeping it in error.py will create some cyclic import problems when we
add types to the QAPISchemaParser. Callers don't need to know the
details of QAPIParseError unless they are parsing or dealing directly
with the parser, so this won't create any harsh new requirements for
callers in the general case.
Update error.py with a little docstring that gives a nod to where the
error may now be found.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Built-in stuff is not parsed from a source file, and therefore have no
QAPISourceInfo. If such None info was used for reporting an error,
built-in stuff would be broken. Programming error. Instead of reporting
a confusing error with bogus source location then, we better crash.
We currently crash only if self.col was set. Assert that self.info is
not None in order to crash reliably.
We can not yet change the type of the initializer to prove this cannot
happen at static analysis time before the remainder of the code is fully
typed.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It's already treated as optional, with one direct caller and some
subclass callers passing 'None'. Make it officially optional, which
requires moving the position of the argument to come after all required
parameters.
QAPISemError becomes functionally identical to QAPISourceError. Keep the
name to preserve its semantic meaning and avoid code churn, but remove
the now-useless __init__ wrapper.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Missed in commit 2cae67bcb5 "qapi: Use super() now we have Python 3".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210421192233.3542904-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename QAPIError to QAPISourceError, and then create a new QAPIError
class that serves as the basis for all of our other custom exceptions,
without specifying any class properties.
This leaves QAPIError as a package-wide error class that's suitable for
any current or future errors.
(Right now, we don't have any errors that DON'T also want to specify a
Source location, but this MAY change. In these cases, a common abstract
ancestor would be desired.)
Add docstrings to explain the intended function of each error class.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-18-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It is -- maybe -- possibly -- three nanoseconds faster.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now with more :words:!
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Per list review: qapi-code-gen.txt reserves suffixes Kind and
List only for type names, but the code rejects them for events and
commands, too.
It turns out we reject them earlier anyway: In check_name_upper() for
event names, and in check_name_lower() for command names.
Still, adjust the code for clarity over what precisely we are guarding
against.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-15-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-13-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a small rewrite to address some minor style nits.
Don't compare against the empty list to check for the empty condition, and
move the normalization forward to unify the check on the now-normalized
structure.
With the check unified, the local nested function isn't needed anymore
and can be brought down into the normal flow of the function. With the
nesting level changed, shuffle the error strings around a bit to get
them to fit in 79 columns.
Note: although ifcond is typed as Sequence[str] elsewhere, we *know* that
the parser will produce real, bona-fide lists. It's okay to check
isinstance(ifcond, list) here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Annotations do not change runtime behavior.
This commit *only* adds annotations.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a minor adjustment that lets parameters @required and
@optional take tuple arguments, in particular (). Later patches will
make use of that.
(Iterable would also have worked, but Iterable also includes things like
generator expressions which are consumed upon iteration, which would
require a rewrite to make sure that each input was only traversed
once. Collection implies the "can re-iterate" property.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Casts are instructions to the type checker only, they aren't "safe" and
should probably be avoided in general. In this case, when we perform
type checking on a nested structure, the type of each field does not
"stick".
(See PEP 647 for an example of "type narrowing" that does "stick".
It is available in Python 3.10, so we can't use it yet.)
We don't need to assert that something is a str if we've already checked
or asserted that it is -- use a cast instead for these cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Prior to this commit, specifying a non-object value here causes the QAPI
parser to crash in expr.py with a stack trace with (likely) an
AttributeError when we attempt to call that value's items() method.
This member needs to be an object (Dict), and not anything else. Add a
check for this with a nicer error message, and formalize that check with
new test cases that exercise that error.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For readability purposes only, shimmy the early return upwards to the
top of the function, so cases proceed in order from least to most
complex.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
mypy isn't fond of allowing you to check for bool membership in a
collection of str elements. Guard this lookup for precisely when we were
given a name.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
mypy does not know the types of values stored in Dicts that masquerade
as objects. Help the type checker out by constraining the type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
OrderedDict is a subtype of dict, so we can check for a more general
form. These functions do not themselves depend on it being any
particular type.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The function can just use the argument from the scope above. Otherwise,
we get shadowed argument errors because the parameter name clashes with
the name of a variable already in-scope.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-3-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The linter yaps after 0825f62c84. Fix this trivial issue to restore the
linter baseline.
(Yes, ideally -- and soon -- the linter will be part of CI so we don't
clutter up the log with fixups. For now, though, the baseline is useful
for testing intermediate commits as types are added to the QAPI
library.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Recent QEMU versions now sometimes exit cleanly with an error message
that a bus is not available for a specified device. Don't flag those
as an error in the device-crash-test script.
Message-Id: <20210323164718.1393792-1-thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some packaged versions of Sphinx (fedora33/alpine so far) have issues
with the annotated C code that kernel-doc spits out. Without knowing
about things like QEMU_PLUGIN_EXPORT it chokes trying to understand
the code. Evidently this is a problem for the kernel as well as the
long stream of regex substitutions we add to in this patch can attest.
Fortunately we have a fairly common format for all our compiler
shenanigans as applied to functions so lets just filter them all out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-2-alex.bennee@linaro.org>
Union branch names should use '-', not '_'. Enforce this. The only
offenders are in tests/. Fix them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-29-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
Enum members should use '-', not '_'. Enforce this. Fix the fixable
offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Struct members, including command arguments, event data, and union
inline base members, should use '-', not '_'. Enforce this. Fix the
fixable offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Command names should be lower-case. Enforce this. Fix the fixable
offenders (all in tests/), and add the remainder to pragma
command-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-25-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Feature names should use '-', not '_'. Enforce this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Command names and member names within a type should be all lower case
with words separated by a hyphen. We also accept underscore. Rework
check_name_lower() to optionally reject underscores, but don't use
that option, yet.
Update expected test output for the changed error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rename pragma returns-whitelist to command-returns-exceptions, and
name-case-whitelist to member-name-case-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-20-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-17-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Type names should be CamelCase. Enforce this. The only offenders are
in tests/. Fix them. Add test type-case to cover the new error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Regexp simplified, new test made more robust]
Event names should be ALL_CAPS with words separated by underscore.
Enforce this. The only offenders are in tests/. Fix them. Existing
test event-case covers the new error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-14-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We require lowercase __RFQDN_ downstream prefixes only where we
require the prefixed name to be lowercase. Don't; permit any case in
__RFQDN_ prefixes anywhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-13-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
check_name_lower() is the only user of check_name_str() using
permit_upper=False. Move the associated code from check_name_str() to
check_name_lower(), and drop the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-12-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Naming rules differ for the various kinds of names. To prepare
enforcing them, define functions to check them: check_name_upper(),
check_name_lower(), and check_name_camel(). For now, these merely
wrap around check_name_str(), but that will change shortly. Replace
the other uses of check_name_str() by appropriate uses of the
wrappers. No change in behavior just yet.
check_name_str() now returns the name without downstream and x-
prefix, for use by the wrappers in later patches. Requires tweaking
regexp @valid_name. It accepts the same strings as before.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-11-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message improved]
check_name_str() masks leading digits when passed enum_member=True.
Only check_enum() does. Lift the masking into check_enum().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Flat union branch names match the tag enum's member names. Omitted
branches default to "no members for this tag value".
Branch names starting with a digit get rejected like "'data' member
'0' has an invalid name". However, omitting the branch works.
This is because flat union tag values get checked twice: as enum
member name, and as union branch name. The former accepts leading
digits, the latter doesn't.
Branches whose names start with a digit therefore cannot have members.
Feels wrong. Get rid of the restriction by skipping the latter check.
This can expose c_name() to input it can't handle: a name starting
with a digit. Improve it to return a valid C identifier for any
input.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message rewritten]
check_type() fails to reject optional members with reserved names,
because it neglects to strip off the leading '*'. Fix that.
The stripping in check_name_str() is now useless. Drop.
Also drop the "no leading '*'" assertion, because valid_name.match()
ensures it can't fail.
Fixes: 9fb081e0b9
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-8-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP command arguments: reject commands with
deprecated ones. Example: when QEMU is run with -compat
deprecated-input=reject, then
{"execute": "eject", "arguments": {"device": "cd"}}
fails like this
{"error": {"class": "GenericError", "desc": "Deprecated parameter 'device' disabled by policy"}}
When the deprecated parameter is removed, the error will change to
{"error": {"class": "GenericError", "desc": "Parameter 'device' is unexpected"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-11-armbru@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP commands: make deprecated ones fail.
Example: when QEMU is run with -compat deprecated-input=reject, then
{"execute": "query-cpus"}
fails like this
{"error": {"class": "CommandNotFound", "desc": "Deprecated command query-cpus disabled by policy"}}
When the deprecated command is removed, the error will change to
{"error": {"class": "CommandNotFound", "desc": "The command query-cpus has not been found"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-10-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP event data: suppress
deprecated members.
No QMP event data is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-6-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP events: suppress
deprecated ones.
No QMP event is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-5-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command results. Example:
when QEMU is run with -compat deprecated-output=hide, then
{"execute": "query-cpus-fast"}
yields
{"return": [{"thread-id": 9805, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
instead of
{"return": [{"arch": "x86", "thread-id": 22436, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
Note the suppression of deprecated member "arch".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-4-armbru@redhat.com>
The 'scsi-hd' and 'scsi-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'ide-hd' and 'ide-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, bash and C crash reproducers are be built manually. This is a
problem, as we want to integrate reproducers into the tree, for
regression testing. This patch adds a script that converts a sequence of
QTest commands into a pasteable Bash reproducer, or a libqtest-based C
program. This will try to wrap pasteable reproducers to 72 chars, but
the generated C code will not have nice formatting. Therefore, the C
output of this script should be piped through an auto-formatter, such as
clang-format
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pvrdma code relies on the pvrdma_ring.h kernel header for some
basic ring buffer handling. The content of that header isn't very
exciting, but contains some (q)atomic_*() invocations that (a)
cause manual massaging when doing a headers update, and (b) are
an indication that we probably should not be importing that header
at all.
Let's reimplement the ring buffer handling directly in the pvrdma
code instead. This arguably also improves readability of the code.
Importing the header can now be dropped.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
