The new migrate_send_rp_req_pages_pending() call should greatly improve
destination responsiveness because it will resync faulted address after
postcopy recovery. However it is also the 1st place to initiate the page
request from the main thread.
One thing is overlooked on that migrate_send_rp_message_req_pages() is not
designed to be thread-safe. So if we wake the fault thread before syncing all
the faulted pages in the main thread, it means they can race.
Postpone the wake up operation after the sync of faulted addresses.
Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201102153010.11979-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When postcopy recover happens, we need to reset last_rb after each return of
postcopy_pause_fault_thread() because that means we just got the postcopy
migration continued.
Unify this reset to the place right before we want to kick the fault thread
again, when we get the command MIG_CMD_POSTCOPY_RESUME from source.
This is actually more than that - because the main thread on destination will
now be able to call migrate_send_rp_req_pages_pending() too, so the fault
thread is not the only user of last_rb now. Move the reset earlier will allow
the first call to migrate_send_rp_req_pages_pending() to use the reset value
even if called from the main thread.
(NOTE: this is not a real fix to 0c26781c09 mentioned below, however it is just
a mark that when picking up 0c26781c09 we'd better have this one too; the real
fix will come later)
Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102153010.11979-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added amount of bytes transferred to the VM at destination by all VFIO
devices
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=OL0Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201026a' into staging
migration pull: 2020-10-26
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 26 Oct 2020 16:17:03 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20201026a:
migration-test: Only hide error if !QTEST_LOG
migration/postcopy: Release fd before going into 'postcopy-pause'
migration: Sync requested pages after postcopy recovery
migration: Maintain postcopy faulted addresses
migration: Introduce migrate_send_rp_message_req_pages()
migration: Pass incoming state into qemu_ufd_copy_ioctl()
migration: using trace_ to replace DPRINTF
migration: Delete redundant spaces
migration: Open brace '{' following function declarations go on the next line
migration: Do not initialise statics and globals to 0 or NULL
migration: Add braces {} for if statement
migration: Open brace '{' following struct go on the same line
migration: Add spaces around operator
migration: Don't use '#' flag of printf format
migration: Do not use C99 // comments
migration: Drop unused VMSTATE_FLOAT64 support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Logically below race could trigger with the old code:
test program migration thread
------------ ----------------
wait_until('postcopy-pause')
postcopy_pause()
set_state('postcopy-pause')
do_postcopy_recover()
arm s->to_dst_file with new fd
release s->to_dst_file [1]
Here [1] could have released the just-installed recoverying channel. Then the
migration could hang without really resuming.
Instead, it should be very safe to release the fd before setting the state into
'postcopy-pause', because there's no reason for any other thread to touch it
during 'postcopy-active'.
Dave reported a very rare postcopy recovery hang that the migration-test
program waited for the migration to complete in migrate_postcopy_complete().
We do suspect it's the same thing that we're gonna fix here. Hard to tell.
However since we've noticed this, fix this irrelevant of the hang report.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We synchronize the requested pages right after a postcopy recovery happens.
This helps to synchronize the prioritized pages on source so that the faulted
threads can be served faster.
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-5-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Maintain a list of faulted addresses on the destination host for which we're
waiting on. This is implemented using a GTree rather than a real list to make
sure even there're plenty of vCPUs/threads that are faulting, the lookup will
still be fast with O(log(N)) (because we'll do that after placing each page).
It should bring a slight overhead, but ideally that shouldn't be a big problem
simply because in most cases the requested page list will be short.
Actually we did similar things for postcopy blocktime measurements. This patch
didn't use that simply because:
(1) blocktime measurement is towards vcpu threads only, but here we need to
record all faulted addresses, including main thread and external
thread (like, DPDK via vhost-user).
(2) blocktime measurement will require UFFD_FEATURE_THREAD_ID, but here we
don't want to add that extra dependency on the kernel version since not
necessary. E.g., we don't need to know which thread faulted on which
page, we also don't care about multiple threads faulting on the same
page. But we only care about what addresses are faulted so waiting for a
page copying from src.
(3) blocktime measurement is not enabled by default. However we need this by
default especially for postcopy recover.
Another thing to mention is that this patch introduced a new mutex to serialize
the receivedmap and the page_requested tree, however that serialization does
not cover other procedures like UFFDIO_COPY.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-4-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is another layer wrapper for sending a page request to the source VM. The
new migrate_send_rp_message_req_pages() will be used elsewhere in coming
patches.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It'll be used in follow up patches to access more fields out of it. Meanwhile
fetch the userfaultfd inside the function.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Message-Id: <1603179176-5360-1-git-send-email-yubihong@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-9-git-send-email-yubihong@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-8-git-send-email-yubihong@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-7-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-6-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-5-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-4-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1603163448-27122-3-git-send-email-yubihong@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1603163448-27122-2-git-send-email-yubihong@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit ef96e3ae96 in January 2019 removed the last user of the
VMSTATE_FLOAT64* macros. These were used by targets which defined
their floating point register file as an array of 'float64'.
We used to try to maintain a stricter distinction between
'float64' (a type for holding an integer representing an IEEE float)
and 'uint64_t', including having a debug option for 'float64' being
a struct and supposedly mandatory macros for converting between
float64 and uint64_t. We no longer think that's a usefully
strong distinction to draw and we allow ourselves to freely
assume that float64 really is just a 64-bit integer type, so
for new targets we would simply recommend use of the uint64_t type
for a floating point register file. The float64 type remains
as a useful way of documenting in the type signature of helper
functions and the like that they expect to receive an IEEE float
from the TCG generated code rather than an arbitrary integer.
Since the VMSTATE_FLOAT64* macros have no remaining users and
we don't recommend new code uses them, delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201022120830.5938-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A default value is provided for the variable 'bitmap_name' to avoid
a compiler warning.
The compiler showed the warning:
migration/block-dirty-bitmap.c:1090:13: warning: ‘bitmap_name’
may be used uninitialized in this function [-Wmaybe-uninitialized]
g_strlcpy(s->bitmap_name, bitmap_name, sizeof(s->bitmap_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201014114430.1898684-1-kuhn.chenqun@huawei.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: commit message grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
sectors_per_chunk is a 64 bit integer, but the calculation is done in 32
bits, leading to an overflow for coarse bitmap granularities.
If that results in the value 0, it leads to a hang where no progress is
made but send_bitmap_bits is constantly called with nr_sectors being 0.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20201021144456.1072-1-s.reiter@proxmox.com>
Fixes: b35ebdf07 migration: add postcopy migration of dirty bitmaps
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Use correct type for 8ULL, use () to avoid overflow]
Signed-off-by: Eric Blake <eblake@redhat.com>
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make dirty_rate field optional, present dirty rate only when querying
the rate has completed.
The qmp results is shown as follow:
@unstarted:
{"return":{"status":"unstarted","start-time":0,"calc-time":0},"id":"libvirt-12"}
@measuring:
{"return":{"status":"measuring","start-time":102931,"calc-time":1},"id":"libvirt-85"}
@measured:
{"return":{"status":"measured","dirty-rate":4,"start-time":150146,"calc-time":1},"id":"libvirt-15"}
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1601350938-128320-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Querying could include both the start-time and the calc-time while at the measuring
state, allowing a caller to determine when they should expect to come back looking
for a result.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1601350938-128320-2-git-send-email-zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Non-empty record/replay queue prevents saving and loading the VM state,
because it includes pending bottom halves and block coroutines.
But when the new VM state is loaded, we don't have to preserve the consistency
of the current state anymore. Therefore this patch just flushes the queue
allowing the coroutines to finish and removes checking for empty rr queue
for load_snapshot function.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <160174521762.12451.15752448887893855757.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Saving icount as a parameters of the snapshot allows navigation between
them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding
the recorded execution to the specific moment of the time.
E.g., 'reverse step' action (introduced in one of the following patches)
needs to load the nearest snapshot which is prior to the current moment
of time.
This patch also updates snapshot test which verifies qemu monitor output.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v4 changes:
- squashed format update with test output update
v7 changes:
- introduced the spaces between the fields in snapshot info output
- updated the test to match new field widths
Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GCC 9.3.0 on Ubuntu complains:
In file included from /usr/include/string.h:495,
from /home/travis/build/huth/qemu/include/qemu/osdep.h:87,
from ../migration/global_state.c:13:
In function ‘strncpy’,
inlined from ‘global_state_store_running’ at ../migration/global_state.c:47:5:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:106:10: error:
‘__builtin_strncpy’ specified bound 100 equals destination size [-Werror=stringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
... but we apparently really want to do a strncpy here - the size is already
checked with the assert() statement right in front of it. To silence the
warning, simply replace it with our strpadcpy() function.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> (two years ago)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200918103430.297167-4-thuth@redhat.com>
Message-Id: <20200925154027.12672-5-alex.bennee@linaro.org>
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eW0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200928a' into staging
Migration: Revert one patch for 068 fix
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 28 Sep 2020 16:19:17 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200928a:
Revert "migration: Properly destroy variables on incoming side"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
add trace points for multifd-tls for debug.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-7-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Similar like migration main thread, we need to do handshake
for each multifd thread.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-6-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd channel cleanup is need if multifd handshake failed,
let's extract it.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-5-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since multifd creation is async with migration_channel_connect, we should
pass the hostname from MigrationState to MultiFDSendParams.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-4-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migration_tls_client_create will be used in multifd-tls, let's
extract it.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
hostname is need in multifd-tls, save hostname into MigrationState.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-2-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
max-bandwidth is set by default to 32 MiB/s (256 Mib/s)
since 2008 (5bb7910af0).
Most of the CPUs can dirty memory faster than that now,
and this is clearly a problem with POWER where the page
size is 64 kiB and not 4 KiB.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200921144957.979989-1-lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running the xen-save-devices-state QMP command, if the filename
already exists it will be truncated before dumping the devices' state
into it.
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Message-Id: <20200921094830.114028-1-dovmurik@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add trace_calls to make it easier to debug
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1600237327-33618-13-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1600237327-33618-12-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
atomic function fixup
Wording fixup in migration.json based on Eric's review
Implement calculate_dirtyrate() function.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-11-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement is_sample_period_valid() to check if the sample period is vaild and
do set_sample_page_period() to sleep specific time between sample actions.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-10-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
