This fields points to an old interface that is no more
used in the current code.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20171122135625.16625-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GTK 3.0 release was made in Feb, 2011:
https://blog.gtk.org/2011/02/10/gtk-3-0-released/
That will soon be 7 years ago, which is enough time to consider
the 3.x series widely supported.
Thus we deprecate the GTK 2.x support, which will allow us to
delete it in the last release of 2018. By this time, GTK 3.x
will be almost 8 years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171212113440.16483-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If kbd_queue is not empty and queue_count >= queue_limit,
we should free evt.
Change-Id: Ieeacf90d5e7e370a40452ec79031912d8b864d83
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-id: 20171225023730.5512-1-linzhecheng@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While the QIOChannel APIs for reading/writing data return ssize_t, with negative
value indicating an error, the VNC code passes this return value through the
vnc_client_io_error() method. This detects the error condition, disconnects the
client and returns 0 to indicate error. Thus all the VNC helper methods should
return size_t (unsigned), and misleading comments which refer to the possibility
of negative return values need fixing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-14-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC client throttling is quite subtle so will benefit from having trace
points available for live debugging.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-13-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous patches fix problems with throttling of forced framebuffer updates
and audio data capture that would cause the QEMU output buffer size to grow
without bound. Those fixes are graceful in that once the client catches up with
reading data from the server, everything continues operating normally.
There is some data which the server sends to the client that is impractical to
throttle. Specifically there are various pseudo framebuffer update encodings to
inform the client of things like desktop resizes, pointer changes, audio
playback start/stop, LED state and so on. These generally only involve sending
a very small amount of data to the client, but a malicious guest might be able
to do things that trigger these changes at a very high rate. Throttling them is
not practical as missed or delayed events would cause broken behaviour for the
client.
This patch thus takes a more forceful approach of setting an absolute upper
bound on the amount of data we permit to be present in the output buffer at
any time. The previous patch set a threshold for throttling the output buffer
by allowing an amount of data equivalent to one complete framebuffer update and
one seconds worth of audio data. On top of this it allowed for one further
forced framebuffer update to be queued.
To be conservative, we thus take that throttling threshold and multiply it by
5 to form an absolute upper bound. If this bound is hit during vnc_write() we
forceably disconnect the client, refusing to queue further data. This limit is
high enough that it should never be hit unless a malicious client is trying to
exploit the sever, or the network is completely saturated preventing any sending
of data on the socket.
This completes the fix for CVE-2017-15124 started in the previous patches.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-12-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server must throttle data sent to the client to prevent the 'output'
buffer size growing without bound, if the client stops reading data off the
socket (either maliciously or due to stalled/slow network connection).
The current throttling is very crude because it simply checks whether the
output buffer offset is zero. This check is disabled if the client has requested
a forced update, because we want to send these as soon as possible.
As a result, the VNC client can cause QEMU to allocate arbitrary amounts of RAM.
They can first start something in the guest that triggers lots of framebuffer
updates eg play a youtube video. Then repeatedly send full framebuffer update
requests, but never read data back from the server. This can easily make QEMU's
VNC server send buffer consume 100MB of RAM per second, until the OOM killer
starts reaping processes (hopefully the rogue QEMU process, but it might pick
others...).
To address this we make the throttling more intelligent, so we can throttle
full updates. When we get a forced update request, we keep track of exactly how
much data we put on the output buffer. We will not process a subsequent forced
update request until this data has been fully sent on the wire. We always allow
one forced update request to be in flight, regardless of what data is queued
for incremental updates or audio data. The slight complication is that we do
not initially know how much data an update will send, as this is done in the
background by the VNC job thread. So we must track the fact that the job thread
has an update pending, and not process any further updates until this job is
has been completed & put data on the output buffer.
This unbounded memory growth affects all VNC server configurations supported by
QEMU, with no workaround possible. The mitigating factor is that it can only be
triggered by a client that has authenticated with the VNC server, and who is
able to trigger a large quantity of framebuffer updates or audio samples from
the guest OS. Mostly they'll just succeed in getting the OOM killer to kill
their own QEMU process, but its possible other processes can get taken out as
collateral damage.
This is a more general variant of the similar unbounded memory usage flaw in
the websockets server, that was previously assigned CVE-2017-15268, and fixed
in 2.11 by:
commit a7b20a8efa
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Oct 9 14:43:42 2017 +0100
io: monitor encoutput buffer size from websocket GSource
This new general memory usage flaw has been assigned CVE-2017-15124, and is
partially fixed by this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-11-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server must throttle data sent to the client to prevent the 'output'
buffer size growing without bound, if the client stops reading data off the
socket (either maliciously or due to stalled/slow network connection).
The current throttling is very crude because it simply checks whether the
output buffer offset is zero. This check must be disabled if audio capture is
enabled, because when streaming audio the output buffer offset will rarely be
zero due to queued audio data, and so this would starve framebuffer updates.
As a result, the VNC client can cause QEMU to allocate arbitrary amounts of RAM.
They can first start something in the guest that triggers lots of framebuffer
updates eg play a youtube video. Then enable audio capture, and simply never
read data back from the server. This can easily make QEMU's VNC server send
buffer consume 100MB of RAM per second, until the OOM killer starts reaping
processes (hopefully the rogue QEMU process, but it might pick others...).
To address this we make the throttling more intelligent, so we can throttle
when audio capture is active too. To determine how to throttle incremental
updates or audio data, we calculate a size threshold. Normally the threshold is
the approximate number of bytes associated with a single complete framebuffer
update. ie width * height * bytes per pixel. We'll send incremental updates
until we hit this threshold, at which point we'll stop sending updates until
data has been written to the wire, causing the output buffer offset to fall
back below the threshold.
If audio capture is enabled, we increase the size of the threshold to also
allow for upto 1 seconds worth of audio data samples. ie nchannels * bytes
per sample * frequency. This allows the output buffer to have a mixture of
incremental framebuffer updates and audio data queued, but once the threshold
is exceeded, audio data will be dropped and incremental updates will be
throttled.
This unbounded memory growth affects all VNC server configurations supported by
QEMU, with no workaround possible. The mitigating factor is that it can only be
triggered by a client that has authenticated with the VNC server, and who is
able to trigger a large quantity of framebuffer updates or audio samples from
the guest OS. Mostly they'll just succeed in getting the OOM killer to kill
their own QEMU process, but its possible other processes can get taken out as
collateral damage.
This is a more general variant of the similar unbounded memory usage flaw in
the websockets server, that was previously assigned CVE-2017-15268, and fixed
in 2.11 by:
commit a7b20a8efa
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Oct 9 14:43:42 2017 +0100
io: monitor encoutput buffer size from websocket GSource
This new general memory usage flaw has been assigned CVE-2017-15124, and is
partially fixed by this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-10-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The logic for determining if it is possible to send an update to the client
will become more complicated shortly, so pull it out into a separate method
for easier extension later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-9-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the RFB protocol, a client sends one or more framebuffer update
requests to the server. The server can reply with a single framebuffer update
response, that covers all previously received requests. Once the client has
read this update from the server, it may send further framebuffer update
requests to monitor future changes. The client is free to delay sending the
framebuffer update request if it needs to throttle the amount of data it is
reading from the server.
The QEMU VNC server, however, has never correctly handled the framebuffer
update requests. Once QEMU has received an update request, it will continue to
send client updates forever, even if the client hasn't asked for further
updates. This prevents the client from throttling back data it gets from the
server. This change fixes the flawed logic such that after a set of updates are
sent out, QEMU waits for a further update request before sending more data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-8-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the VNC servers tracks whether a client has requested an incremental
or forced update with two boolean flags. There are only really 3 distinct
states to track, so create an enum to more accurately reflect permitted states.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we encode data for writing with SASL, we encode the entire pending output
buffer. The subsequent write, however, may not be able to send the full encoded
data in one go though, particularly with a slow network. So we delay setting the
output buffer offset back to zero until all the SASL encoded data is sent.
Between encoding the data and completing sending of the SASL encoded data,
however, more data might have been placed on the pending output buffer. So it
is not valid to set offset back to zero. Instead we must keep track of how much
data we consumed during encoding and subtract only that amount.
With the current bug we would be throwing away some pending data without having
sent it at all. By sheer luck this did not previously cause any serious problem
because appending data to the send buffer is always an atomic action, so we
only ever throw away complete RFB protocol messages. In the case of frame buffer
updates we'd catch up fairly quickly, so no obvious problem was visible.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vnc_update_client() method checks the 'has_dirty' flag to see if there are
dirty regions that are pending to send to the client. Regardless of this flag,
if a forced update is requested, updates must be sent. For unknown reasons
though, the code also tries to sent updates if audio capture is enabled. This
makes no sense as audio capture state does not impact framebuffer contents, so
this check is removed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that previous dead / unreachable code has been removed, we can simplify
the indentation in the vnc_client_update method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A previous commit:
commit 5a8be0f73d
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed Jul 13 12:21:20 2016 +0200
vnc: make sure we finish disconnect
Added a check for vs->disconnecting at the very start of the
vnc_update_client method. This means that the very next "if"
statement check for !vs->disconnecting always evaluates true,
and is thus redundant. This in turn means the vs->disconnecting
check at the very end of the method never evaluates true, and
is thus unreachable code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is only one caller of vnc_update_client and that always passes false
for the 'sync' parameter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use keycodedb to generate a qcode to linux mapping
Signed-off-by: Owen Smith <owen.smith@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
With SDL 2.0.6, calling SDL_ShowWindow during SDL_WINDOWEVENT_HIDDEN
blocks all subsequent display updates.
Instead of trying to override the change, just update the scon->hidden
flag.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171112193032.9724-2-makovick@gmail.com>
This is a partial revert of d3f3a0f453,
which in turn is a workaround for a SDL bug. The bug is fixed in 2.0.6,
see https://bugzilla.libsdl.org/show_bug.cgi?id=3410
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Prevents displaying of a doubled mouse pointer when moving the pointer
to the screen edges when fullscreen.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171112193032.9724-8-makovick@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also use a proper enum parameter for SDL_ShowCursor
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171112193032.9724-4-makovick@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
register checks for dcl->ds being NULL, to avoid registering
the same dcl twice.
Therefore dcl->ds must be cleared on unregister, otherwise
un-registering and re-registering doesn't work.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510809
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171109105154.29414-1-kraxel@redhat.com
Send those ctrl-alt key combos that QEMU doesn't treat specially to
the guest rather than ignoring them.
All the case where we do special handling of ctrl-alt-X exit the
event handling using a "return" statement, so we can simply allow
the rest to fall through into the normal key handling by deleting
the now-spurious "else".
We take the opportunity to clean up some oddly-formatted and
now rather uninformative comments by removing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the cocoa user interface relis on the user pushing
control-alt to ungrab the mouse. This is patch changes the key
combination to control-alt-g to be in line with the GTK user
interface.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20171102213907.11443-1-programmingkidx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make scrolling in the monitor work, by correctly passing through
control+key combinations.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20171101154607.1582-1-programmingkidx@gmail.com
[PMM: fixed coding style nits; cleaned up commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix console selection keys so that the right console is selected.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20171005190449.15591-1-programmingkidx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Latest keycodemapdb has a fix for Sun keyboard Pause mapping
and backcompat fix for QEMU's treatment of 0xb7 as an alternative
to 0x54 for triggering Print/SysRq
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-10-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'sysrq' key was mistakenly added to QEMU to deal with incorrect handling
of the 'print' key in the ps2 device:
commit f2289cb692
Author: balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Wed Jun 4 10:14:16 2008 +0000
Add sysrq to key names known by "sendkey".
Adding sysrq keycode to the table enabling running sysrq debugging in
the guest via the monitor sendkey command, like:
(qemu) sendkey alt-sysrq-t
Tested on x86-64 target and Linux guest.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
The ps2 device is now fixed wrt modifiers and the 'print' key. Further the
handling of the 'sysrq' key has some problems of its own, documented in the
previous commit. To cleanup this mess, we convert any use of 'sysrq' into
'print' prior to dispatching the event to device models.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-9-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code converting key numbers to QKeyCode in the 'input-send-event'
command mistakenly accessed the key->u.qcode union field instead of
the key->u.number field. This is harmless because the fields use the
same size datatype in both cases, but none the less it should be fixed
to avoid confusion.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171019142848.572-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Previously we enforced that all key events are using QKeyCodes
at time they are sent:
commit af07e5ff02
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Sep 29 11:12:00 2017 +0100
ui: convert key events to QKeyCodes immediately
This commit forget to fix the code for the legacy 'sendkey'
command which still accepts key numbers from the user, which
then need converting to QKeyCodes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171019142848.572-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
egl_texture_blit() blits a texture, simliar to egl_fb_blit() but by
rendering the texture to the screen instead of using a framebuffer blit.
egl_texture_blend() renders a texture with alpha blending, will be used
to render the cursor to the screen.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-6-kraxel@redhat.com
Add helper function to import a dma-buf as opengl texture.
Also add a helper to release the texture again.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-5-kraxel@redhat.com
Add vertex shader which flips the texture upside down while blitting it.
Add argument to qemu_gl_run_texture_blit() to enable flipping.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-4-kraxel@redhat.com
With the upcoming dmabuf support in qemu there will be more users of the
shaders than just console-gl.c. So rename ConsoleGLState to
QemuGLShader, rename some functions too, move code from console-gl.c to
shaders.c.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-3-kraxel@redhat.com
This patch adds support for dma-bufs to the qemu console interfaces.
It adds a new "struct QemuDmaBuf" to represent a dmabuf with accociated
metatdata (size, format). It adds three functions (and
DisplayChangeListenerOps operations) to set a dma-buf as display
scanout, as cursor and to release a dmabuf.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-2-kraxel@redhat.com
The gd_gl_area_scanout_texture must destroy framebuffer if there is
no texture id instead of no framebuffer id.
The effect was a black screen with "-vga virtio -display gtk,gl=on"
options.
The bug was introduce by a4f113fd "gtk: use framebuffer helper functions."
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com>
Message-id: 20171002124052.13829-1-anthoine.bourgeois@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vte_terminal_copy_clipboard() is deprecated in VTE 0.50.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All public code should use qemu_input_event_send_key* functions
instead of creating an event directly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Always use QKeyCode in the InputKeyEvent struct, by converting key
numbers to QKeyCode at the time the event is created. This allows
the code processing / consuming key events to assume QKeyCode is
used. The only place we accept a key number in the InputKeyEvent
struct is with QMP commands sent by the user.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the number_to_qcode, qcode_to_number and linux_to_qcode
tables with automatically generated tables.
Missing entries in linux_to_qcode now fixed:
KEY_LINEFEED -> Q_KEY_CODE_LF
KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS
KEY_COMPOSE -> Q_KEY_CODE_COMPOSE
KEY_AGAIN -> Q_KEY_CODE_AGAIN
KEY_PROPS -> Q_KEY_CODE_PROPS
KEY_UNDO -> Q_KEY_CODE_UNDO
KEY_FRONT -> Q_KEY_CODE_FRONT
KEY_COPY -> Q_KEY_CODE_COPY
KEY_OPEN -> Q_KEY_CODE_OPEN
KEY_PASTE -> Q_KEY_CODE_PASTE
KEY_CUT -> Q_KEY_CODE_CUT
KEY_HELP -> Q_KEY_CODE_HELP
KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT
In addition, some fixes:
- KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of
KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes
sets, while KEY_PLAYCD only appears in AT set1, so the former is
a more useful mapping.
Missing entries in qcode_to_number now fixed:
Q_KEY_CODE_AGAIN -> 0x85
Q_KEY_CODE_PROPS -> 0x86
Q_KEY_CODE_UNDO -> 0x87
Q_KEY_CODE_FRONT -> 0x8c
Q_KEY_CODE_COPY -> 0xf8
Q_KEY_CODE_OPEN -> 0x64
Q_KEY_CODE_PASTE -> 0x65
Q_KEY_CODE_CUT -> 0xbc
Q_KEY_CODE_LF -> 0x5b
Q_KEY_CODE_HELP -> 0xf5
Q_KEY_CODE_COMPOSE -> 0xdd
Q_KEY_CODE_KP_EQUALS -> 0x59
Q_KEY_CODE_MEDIASELECT -> 0xed
In addition, some fixes:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xdd) and is now mapped to 0x9e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined
scan code in AT set 1, it is now mapped to 0x54 (sysrq)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a
data file mapping between all the different scancode/keycode/keysym
sets that are known, and a tool to auto-generate lookup tables for
different combinations.
It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys.
Using it in QEMU will let us replace many hand written lookup
tables with auto-generated tables from a master data source,
reducing bugs. Adding new QKeyCodes will now only require the
master table to be updated, all ~20 other tables will be
automatically updated to follow.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-4-berrange@redhat.com
[ kraxel: fix build ]
[ kraxel: switch repo to qemu.git mirror ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also set saved handle to zero when removing without adding a new watch.
Signed-off-by: Brandon Carpenter <brandon.carpenter@cypherpath.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Trace anything related to authentication in the VNC protocol
handshake
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170921121528.23935-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Trace anything which opens/closes/wraps a QIOChannel in the
VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170921121528.23935-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename the functions to to say "setup" instead of "create" because they
support being called multiple times on the same egl framebuffer.
Properly delete unused textures, update function interfaces to support
this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170927115031.12063-1-kraxel@redhat.com
Handle the translation from vga chars to curses chars in curses_update()
instead of console_write_ch(). Purge any curses support bits from
ui/console.h include file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170927103811.19249-1-kraxel@redhat.com
Tidy up some of the warn_report() messages after having converted them
to use warn_report().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some termcaps (found using SLES11SP1) use [? sequences. According to man
console_codes (http://linux.die.net/man/4/console_codes) the question mark
is a nop and should simply be ignored.
This patch does exactly that, rendering screen output readable when
outputting guest serial consoles to the graphical console emulator.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 20170829113818.42482-1-agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio-gpu can trigger the assert added by commit "6905b93447 console:
add same surface replace pre-condition" in multihead setups (where
surface can be NULL for secondary displays). Allow surface being NULL.
Fixes: 6905b93447
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170906142109.2685-1-kraxel@redhat.com
Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more. While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com
Currently, the FOO_lookup[] generated for QAPI enum types are
terminated by a NULL sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, replace "have we reached the sentinel?"
predicates by "have we reached the FOO__MAX value?" predicates.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-12-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Extract the (correct) cleaning code as a new function vnc_free_addresses() then
use it to remove the memory leaks.
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Both keys exist already: "ac_search" is "find" and "ac_stop" is "stop".
Fixes: 37810e8055
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170728063415.27480-1-kraxel@redhat.com
The SPICE input code is currently detcting 0xe1 0x1d 0x45 as
the PAUSE key make sequence and 0xe1 0x9d 0xc5 as the break
sequence. This is incorrect, because all 6 scancodes together
are the make sequence, and there is no break sequence.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170727174640.30359-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The processing of the scancodes for PAUSE/BREAK has been broken since
the conversion to qcodes in:
commit 8c10e0baf0
Author: Hervé Poussineau <hpoussin@reactos.org>
Date: Thu Sep 15 22:06:26 2016 +0200
ps2: use QEMU qcodes instead of scancodes
When using a VNC client, with the raw scancode extension, the client
will send a scancode of 0xc6 for both PAUSE and BREAK. There is mistakenly
no entry in the qcode_to_number table for this scancode, so
ps2_keyboard_event() just generates a log message and discards the
scancode
When using a SPICE client, it will also send 0xc6 for BREAK, but
will send 0xe1 0x1d 0x45 0xe1 0x9d 0xc5 for PAUSE. There is no
entry in the qcode_to_number table for the scancode 0xe1 because
it is a special XT keyboard prefix not mapping to any QKeyCode.
Again ps2_keyboard_event() just generates a log message and discards
the scancode. The following 0x1d, 0x45, 0x9d, 0xc5 scancodes get
handled correctly. Rather than trying to handle 3 byte sequences
of scancodes in the PS/2 driver, special case the SPICE input
code so that it captures the 3 byte pause sequence and turns it
into a Pause QKeyCode.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170727113243.23991-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The right alt key (alt_r aka KEY_RIGHTALT) is used for AltGr.
The altgr and altgr_r keys simply don't exist. Drop them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170727104720.30061-1-kraxel@redhat.com
Add multimedia keys to QKeyCodes and to the keymaps.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170726152918.11995-5-kraxel@redhat.com
Move from input-linux.c to input-keymap.c and export it,
so the function is available elsewhere too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170726152918.11995-3-kraxel@redhat.com
Page-up and Page-down were renamed. Add the names to the keysym list
so we can parse both old and new names. The keypad versions are already
present in the vnc map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170726152918.11995-2-kraxel@redhat.com
The current VNC default keyboard delay is 1ms. With that we're constantly
typing faster than the guest receives keyboard events from an XHCI attached
USB HID device.
The default keyboard delay time in the input layer however is 10ms. I don't know
how that number came to be, but empirical tests on some OpenQA driven ARM
systems show that 10ms really is a reasonable default number for the delay.
This patch moves the VNC delay also to 10ms. That way our default is much
safer (good!) and also consistent with the input layer default (also good!).
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1499863425-103133-1-git-send-email-agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The [NSEvent modifierFlags] method returns an NSEventModifierFlags type value in Mac OS 10.10. It use to be of type NSUInteger. Replacing NSEventModifierFlags with NSUInteger allows for the cooca.m file to be compiled on older versions of Mac OS. This patch was been tested on Mac OS 10.6 and Mac OS 10.12 without problem.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: F6C36C1A-4661-48F4-BEA6-3994889927D0@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Programs running inside of QEMU can sometimes use more CPU time than is really
needed. To solve this problem, we just need to throttle the virtual CPU. This
feature will stop laptops from burning up.
This patch adds a menu called Speed that has menu items from 100% to 1% that
represent the speed options. 100% is full speed and 1% is slowest.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: D6FAAABF-064D-49C0-B572-C73679F34052@gmail.com
[PMM: Moved "mark 100% menu item as checked initially" code to
after menu item is allocated, not before it]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a loop a few lines up counting consoles and setting
sdl2_num_outputs accordingly, so con ptr can't be NULL there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170621122234.12751-1-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Delays in the input layer are special cased input events. Every input
event is accounted for in a global intput queue count. The special cased
delays however did not get removed from the queue, leading to queue overruns
and thus silent key drops after typing quite a few characters.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1498117318-162102-1-git-send-email-agraf@suse.de
Fixes: be1a7176 ("input: add support for kbd delays")
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop commented debug logging, add trace points instead.
Also cleanup parser code a bit, the key name is copied into a new
variable instead of patching the input line, that way we can log
the unmodified line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170606134736.26080-1-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----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=O9Vv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Looks like #include "hw/qdev.h" is not needed here, so remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1497894617-12143-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop the temporary workaround for the broken display updates.
All display adapters are updated, so this should be safe without
causing regressions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20170614084538.32480-1-kraxel@redhat.com
Add a collection of egl_fb_*() helper functions to manage and use opengl
framebuffers, which is a common pattern in UI code with opengl support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170614084149.31314-2-kraxel@redhat.com
TYPE_QEMU_CONSOLE property "head" is defined with
object_property_add_uint*_ptr().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-41-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Although the Qemu and spice flags currently have the same value, it
seems more correct to pass the spice flag values to
spice_server_kbd_leds(), especially considering that this function
already makes an effort to convert between the QEMU_*_LED and
SPICE_KEYBOARD_MODIFIER_* values.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170510202006.31737-1-jjongsma@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I had two problems with QEMU on macOS:
1) Sometimes when alt-tabbing to QEMU it would act as if the 'a' key
was pressed so I'd get 'aaaaaaaaa....'.
2) Using Sikuli to programatically send keys to the QEMU window text
like "foo_bar" would come out as "fooa-bar".
They looked similar and after much digging the problem turned out to be
the same. When QEMU's ui/cocoa.m received an NSFlagsChanged NSEvent it
looked at the keyCode to determine what modifier key changed. This
usually works fine but sometimes the keyCode is 0 and the app should
instead be looking at the modifierFlags bitmask. Key code 0 is the 'a'
key.
I added code that handles keyCode == 0 differently. It checks the
modifierFlags and if they differ from QEMU's idea of which modifier
keys are currently pressed it toggles those changed keys.
This fixes my problems and seems work fine.
Signed-off-by: Ian McKellar <ianloic@google.com>
Message-id: 20170526233816.47627-1-ianloic@google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
