The vte widget implements the scrollable interface, placing it into
a scrolled window is pointless and creates a bunch of strange effects.
Zap it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Have a global timer. Update all visible terminal windows syncronously.
Right now this can be the active_console only, but that will change
soon. The global timer will disable itself if not needed, so we only
have to care start it if needed. Which might be at console switch time
or when a new displaychangelistener is registered.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These days each QemuConsole has its own private DisplaySurface,
so we can simply render updates all the time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that we have a function to create a fancy DisplaySurface with a
message for the user, to handle non-existing graphics hardware, we
can make it more generic and use it for other things too.
This patch adds a text line to the in initial DisplaySurface, notifying
the user that the display isn't initialized yet by the guest.
You can see this in action when starting qemu with '-S'. Also when
booting ovmf in qemu (which needs a few moments to initialize itself
before it initializes the vga).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All defined properties of QemuConsole are mandatory and no access to them
should fail. Nevertheless not checking returned errors is bad because in case
of unexpected failure it will hide the bug and cause a memory leak.
Abort in case of unexpected property access errors. This change exposed a bug
where an attempt was made to write to a read-only property "head".
Set "head" property's value at creation time and do not attempt to change it
later. This fixes the bug mentioned above.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With sparc keyboard going directly from QKeyValue to sparc keycodes
this should not be needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Current Makefile system allows using foo.o-cflags variables to store
object-specific CFLAGS. Convert some usages of old syntax
(using QEMU_CFLAGS += construct) to the new syntax.
Do not touch multifile modules for now, as build system isn't ready for this.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only notify spice-server about migration events in case we got
target host information beforehand. So we kick the seamless spice
client migration only in case a actual live migration happens, not
when libvirt uses live-migration-to-file for snapshotting.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In case no listening address was specified, "info spice" reports
"0.0.0.0" as address. Which is incorrect in case spice is listening
on ipv6. Replace it by a wildcard "*" to indicate it is not limited
to a specific address.
Note: Being more specific is not possible without extending the
spice-server api. The socket is handled by spice-server not
qemu, so qemu can't easily figure the actual socket address.
Reported-by: David Jaša <djasa@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There was already a forward declaration using 'static',
but the attribute was missing in the implementation.
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In SDL2, wheel movement is its own event, not a button event. Wire
it up similar to gtk.c
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allows you to resize the sdl2 window and have the guest notice.
[ kraxel: zero-initialize QemuUIInfo ]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When keyboard focus is grabbed, current qemu wants to pass every
keypress to the VM, unless the user is pressing a UI accelerator.
That's exactly how things work without any of the fancy handling. Drop
the special handling, which seems to trigger accelerators twice on gtk3.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Try kicking off a rhel5 text install over serial, the text menu navigation
is all messed up, and some of the kernel boot messages are randomly
corrupted.
Drop use of a pty and just use vte infrastructure for reading and writing.
This fixes the above corruption, and is simpler to boot.
(I don't know what was wrong with the original code though. FWIW this is
what virt-manager has done for years).
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using the standard ctrl+q makes it too easy to kill the whole VM. Using
ctrl+alt+FOO is consistent with our other accelerators.
https://bugzilla.redhat.com/show_bug.cgi?id=1062393
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stock items are deprecated. As are ImageMenuItems. Convert everything to
text only MenuItems, with the same text content as mentioned in the
conversion guide:
https://docs.google.com/spreadsheet/pub?key=0AsPAM3pPwxagdGF4THNMMUpjUW5xMXZfdUNzMXhEa2c&output=html
gtk2 users lose their menu icons as well, but I don't think that's enough
of a problem to warrant keeping around back compat code.
Example error:
ui/gtk.c:1328:5: error: ‘GtkStock’ is deprecated [-Werror=deprecated-declarations]
ui/gtk.c:1335:5: error: ‘gtk_image_menu_item_new_from_stock’ is deprecated (declared at /usr/include/gtk-3.0/gtk/deprecated/gtkimagemenuitem.h:78): Use 'gtk_menu_item_new' instead [-Werror=deprecated-declarations]
s->zoom_out_item = gtk_image_menu_item_new_from_stock(GTK_STOCK_ZOOM_OUT, NULL);
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guard this with a VTE version check, since I'm not sure if this is backwards
compatible.
ui/gtk.c: In function ‘gd_vc_init’:
ui/gtk.c:1176:5: error: ‘vte_terminal_get_adjustment’ is deprecated (declared at /usr/include/vte-2.90/vte/vtedeprecated.h:101) [-Werror=deprecated-declarations]
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In these cases we weren't using an image in the menu item anyways, so
just do as the suggestion says. Should be fine for all qemu supported
gtk versions.
ui/gtk.c: In function ‘gd_create_menu_machine’:
ui/gtk.c:1284:5: error: ‘gtk_image_menu_item_new_with_mnemonic’ is deprecated (declared at /usr/include/gtk-3.0/gtk/deprecated/gtkimagemenuitem.h:76): Use 'gtk_menu_item_new_with_mnemonic' instead [-Werror=deprecated-declarations]
s->reset_item = gtk_image_menu_item_new_with_mnemonic(_("_Reset"));
^
ui/gtk.c:1287:5: error: ‘gtk_image_menu_item_new_with_mnemonic’ is deprecated (declared at /usr/include/gtk-3.0/gtk/deprecated/gtkimagemenuitem.h:76): Use 'gtk_menu_item_new_with_mnemonic' instead [-Werror=deprecated-declarations]
s->powerdown_item = gtk_image_menu_item_new_with_mnemonic(_("Power _Down"));
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These errors don't seem user initiated, so forcibly printing to the
monitor doesn't seem right. Just use error_report.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Right now relative mode accelerates too fast, and has the 'invisible wall'
problem. SDL2 added an explicit API to handle this use case, so let's use
it.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unbreaks relative mouse mode with sdl2, just like was done with sdl.c
in c3aa84b6.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes the behavior in the relative mode to be compatible
with other UIs, namely, grabbing the input at the first left click.
It improves the usability a lot; otherwise you have to press ctl-alt-G
or select from menu at each time you want to move the pointer. Also,
the input grab is cleared when the current mode is switched to the
absolute mode.
The automatic reset of the implicit grabbing is needed since the
switching to the absolute mode happens always after the click even on
Gtk. That is, we cannot check whether the absolute mode is already
available at the first click time even though it should have been
switched in X11 input driver side.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's pretty annoying that the pointer reappears at a random place once
after grabbing and ungrabbing the input. Better to restore to the
original position where the pointer was grabbed.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The relative pointer tracking mode was still buggy even after the
previous fix of the motion-notify-event since the events are filtered
out when the pointer moves outside the drawing window due to the
boundary check for the absolute mode.
This patch fixes the issue by moving the unnecessary boundary check
into the if block of absolute mode, and keep the coordinate in the
relative mode even if it's outside the drawing area. But this makes
the coordinate (last_x, last_y) possibly pointing to (-1,-1),
introduce a new flag to indicate the last coordinate has been
updated.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDK motion-notify-event isn't generated when the pointer goes out
of the target window even if the pointer is grabbed, which essentially
means to lose the pointer tracking in gtk-ui.
Meanwhile the generic "event" signal is sent when the pointer is
grabbed, so we can use this and pick the motion notify events manually
there instead.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Otherwise, the index of an input device like a usb-kbd is silently accepted.
(qemu) info mice
Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse
(qemu) mouse_set 1
(qemu) info mice
Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse
Also replace monitor_printf() call in do_mouse_set() with error_report() and
adjust error message.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK without VTE is needed for hosts which don't support VTE (for example
all variants of MinGW), but it can also be reasonable for other hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Current tablet + spice is unusable. Regressed with the UI input rework.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are currently three types of object_property_add_link() callers:
1. The link property may be set at any time.
2. The link property of a DeviceState instance may only be set before
realize.
3. The link property may never be set, it is read-only.
Something similar can already be achieved with
object_property_add_str()'s set() argument. Follow its example and add
a check() argument to object_property_add_link().
Also provide default check() functions for case #1 and #2. Case #3 is
covered by passing a NULL function pointer.
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Tweaked documentation comment]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some object_property_add_link() callers expect property deletion to
unref the link property object. Other callers expect to manage the
refcount themselves. The former are currently broken and therefore leak
the link property object.
This patch adds a flags argument to object_property_add_link() so the
caller can specify which refcount behavior they require. The new
OBJ_PROP_LINK_UNREF_ON_RELEASE flag causes the link pointer to be
unreferenced when the property is deleted.
This fixes refcount leaks in qdev.c, xilinx_axidma.c, xilinx_axienet.c,
s390-virtio-bus.c, virtio-pci.c, virtio-rng.c, and ui/console.c.
Rationale for refcount behavior:
* hw/core/qdev.c
- bus children are explicitly unreferenced, don't interfere
- parent_bus is essentially a read-only property that doesn't hold a
refcount, don't unref
- hotplug_handler is leaked, do unref
* hw/dma/xilinx_axidma.c
- rx stream "dma" links are set using set_link, therefore they
need unref
- tx streams are set using set_link, therefore they need unref
* hw/net/xilinx_axienet.c
- same reasoning as hw/dma/xilinx_axidma.c
* hw/pcmcia/pxa2xx.c
- pxa2xx bypasses set_link and therefore does not use refcounts
* hw/s390x/s390-virtio-bus.c
* hw/virtio/virtio-pci.c
* hw/virtio/virtio-rng.c
* ui/console.c
- set_link is used and there is no explicit unref, do unref
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
this fixes invalid rectangle updates observed after commit 12b316d
with the vmware VGA driver. The issues occured because the server
and client surface update seems to be out of sync at some points
and the max width of the surface is not dividable by
VNC_DIRTY_BITS_PER_PIXEL (16).
Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This matches the behavior of SDL, and makes the mouse usable when
using -display gtk -vga qxl
https://bugzilla.redhat.com/show_bug.cgi?id=1051724
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We were using the wrong coordinates, this fixes things to match the
original gtk2 implementation.
You can see this error in action by using -vga qxl, however even after this
patch the mouse warps in small increments up and to the left, -7x and -3y
pixels at a time, until the pointer is warped off the widget. I think it's
a qxl bug, but the next patch covers it up.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As long as we have no persistent GTK configuration, this allows to
enable the useful grab-on-hover feature already when starting the VM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fix warning with CONFIG_GTK=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hook into scroll-event to properly forward mouse wheel movements to the
guest, just like we already do in SDL.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Restores traditional behavior: Keyboard input will be routed to the most
recently added keyboard. Without this all kbd input goes to the ps/2
keyboard, even if you add a usb keyboard to your guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
- vnc_update_client_new2: 0.29 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.07 secs
- vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
vnc_update_client_new2 shows the performance of vnc_update_client
with this patch added.
Comparing with the test run of the last patch the performance
is at least unchanged while it is significantly improved
for the all bits dirty case.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_update_client currently scans the dirty bitmap of each client
bitwise which is a very costly operation if only few bits are dirty.
vnc_refresh_server_surface does almost the same.
this patch optimizes both by utilizing the heavily optimized
function find_next_bit to find the offset of the next dirty
bit in the dirty bitmaps.
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.08 secs
vnc_update_client_old: 10.98 secs
The case for all bits dirty is still rather slow, this
is due to the implementation of find_and_clear_dirty_height.
This will be addresses in a separate patch.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this allows for setting VNC_DIRTY_PIXELS_PER_BIT to different
values than 16 if desired.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spotted by Coverity:
876 static int vnc_update_client_sync(VncState *vs, int has_dirty)
877 {
(1) Event freed_arg: "vnc_update_client(VncState *, int)" frees "vs". [details]
Also see events: [deref_arg]
878 int ret = vnc_update_client(vs, has_dirty);
(2) Event deref_arg: Calling "vnc_jobs_join(VncState *)" dereferences freed pointer "vs". [details]
Also see events: [freed_arg]
879 vnc_jobs_join(vs);
880 return ret;
881 }
Remove vnc_update_client_sync wrapper, replace it with an additional
argument to vnc_update_client, so we can so the sync properly in
vnc_update_client (i.e. skip it in case of a client disconnect).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Hi,
When I use RealVNC viewer client (http://www.realvnc.com/) to connect vnc server,
the client disconnect suddenly, and I click reconnect button immediately, then the Qemu crashed.
In the function vnc_worker_thread_loop, will call vnc_async_encoding_start
to set the local vs->output buffer by global queue's buffer. Then send rectangles to
the vnc client call function vnc_send_framebuffer_update. Finally, Under normal circumstances,
call vnc_async_encoding_end to set the global queue'buffer by the local vs->output conversely.
When the vnc client disconnect, the job->vs->csock will be set to -1. And the current prcoess
logic will goto disconnected partion without call function vnc_async_encoding_end.
But, the function vnc_send_framebuffer_update will call buffer_reserve, which
maybe call g_realloc reset the local vs's buffer, meaning the global queue's buffer is modified also.
If anyone use the original global queue's buffer memory will cause corruption and then crash qemu.
This patch assure the function vnc_async_encoding_end being called
even though the vnc client disconnect suddenly.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
VncTight member uint8_t quality is either (uint8_t)-1 for lossless or
less than 10 for lossy.
tight_detect_smooth_image() first promotes it to int, then compares
with -1. Always unequal, so we always execute the lossy code. Reads
beyond tight_conf[] and returns crap when quality is actually
lossless.
Compare to (uint8_t)-1 instead, like we do elsewhere.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If enabled, set the thread name at creation (on GNU systems with
pthread_set_np)
Fix up all the callers with a thread name
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This removes the last user of the lecagy input mouse handler list,
so we can remove more legacy bits with this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
legacy mouse event handlers are registered in the new core,
so they receive events submitted to the new input core.
legacy kbd_mouse_event() continues to use the old code paths.
So new-core event handlers wouldn't see events submitted via
kbd_mouse_event.
This leads to the constrain that we we must transition all
kbd_mouse_event() users first to keep things working. But
that is easier to handle than translating legacy mouse events
into new-core mouse events ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Transform absolute mouse events according to graphic_rotate.
Legacy input code does it for both absolute and relative events,
but the logic is broken for relative coordinates, so this is
most likely not used anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Likewise a bunch of helper functions to manage mouse button
and movement events, again to make life easier for the ui code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
legacy kbd event handlers are registered in the new core,
so they receive events from the new input core code.
keycode -> scancode translation needed here.
legacy kbd_put_keycode() sends events to the new core.
scancode -> keycode translation needed here.
So with this patch the new input core is fully functional
for keyboard events. New + legacy interfaces can be mixed
in any way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A bunch of helper functions to manage keyboard events,
to make life simpler for the ui code when submitting
keyboard events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK uses different hardware keycodes on Windows hosts, so some special
handling is needed to get the QEMU keycode.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The ui/cocoa.m file has just three lines with hardcoded tabs; fix them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1387886052-27067-1-git-send-email-peter.maydell@linaro.org
If our redraw method is called before we have any data from the guest,
then draw a black rectangle rather than leaving the window empty.
This mostly only matters when the guest machine has no framebuffer
device, but it is more in line with the behaviour of other QEMU UIs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-3-git-send-email-peter.maydell@linaro.org
If the surface switch involved a resize, we were doing the redraw
at the old size rather than the new, because the update of
screen.width and screen.height was being done after the setFrame
method calls which triggered a redraw. Normally this isn't very
noticeable because typically after the guest triggers the window
resize it also draws something to it, which will in turn cause
us to redraw. However, the combination of a guest which never
draws to the display and a command line setting of a screen size
larger than the default can reveal odd effects.
Move most of the handling of resizes to the top of the method,
and guard it with a check that the surface size actually changed,
to avoid unnecessary operations (including some user visible ones
like "recenter the window on the screen") if the surface is the
same size as the old one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-2-git-send-email-peter.maydell@linaro.org
Fix a number of bugs in the code for starting QEMU via the image
file load dialog:
* use the actual argv[0] rather than "qemu": this avoids failures to
find BIOS image files caused by not looking in the correct directory
relative to the executable path
* allocate a large enough argv array to NULL terminate it
* use g_strdup(X) rather than g_strdup_printf("%s", X) or
g_strdup_printf(X)
* disable the printing of the simulated command line argument
(which is presumably intended for debug only)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-6-git-send-email-peter.maydell@linaro.org
