Add property "ioeventfd" which is enabled by default. When this is
enabled, updates on the doorbell registers will cause KVM to signal
an event to the QEMU main loop to handle the doorbell updates.
Therefore, instead of letting the vcpu thread run both guest VM and
IO emulation, we now use the main loop thread to do IO emulation and
thus the vcpu thread has more cycles for the guest VM.
Since ioeventfd does not tell us the exact value that is written, it is
only useful when shadow doorbell buffer is enabled, where we check
for the value in the shadow doorbell buffer when we get the doorbell
update event.
IOPS comparison on Linux 5.19-rc2: (Unit: KIOPS)
qd 1 4 16 64
qemu 35 121 176 153
ioeventfd 41 133 258 313
Changes since v3:
- Do not deregister ioeventfd when it was not enabled on a SQ/CQ
Signed-off-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since commit 916b0f0b52 ("hw/nvme: change nvme-ns 'shared' default")
the default value of nvme-ns param 'shared' is set to true, regardless
if there is a nvme-subsys node or not.
On a system without a nvme-subsys node, a namespace will never be able
to be attached to more than one controller, so for this configuration,
it is counterintuitive for this parameter to be set by default.
Force the nvme-ns param 'shared' to false for configurations where
there is no nvme-subsys node, as the namespace will never be able to
attach to more than one controller anyway.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
When shadow doorbell buffer is enabled, doorbell registers are lazily
updated. The actual queue head and tail pointers are stored in Shadow
Doorbell buffers.
Add trace events for updates on the Shadow Doorbell buffers and EventIdx
buffers. Also add trace event for the Doorbell Buffer Config command.
Signed-off-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[k.jensen: rebased]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Implement Doorbel Buffer Config command (Section 5.7 in NVMe Spec 1.3)
and Shadow Doorbel buffer & EventIdx buffer handling logic (Section 7.13
in NVMe Spec 1.3). For queues created before the Doorbell Buffer Config
command, the nvme_dbbuf_config function tries to associate each existing
SQ and CQ with its Shadow Doorbel buffer and EventIdx buffer address.
Queues created after the Doorbell Buffer Config command will have the
doorbell buffers associated with them when they are initialized.
In nvme_process_sq and nvme_post_cqe, proactively check for Shadow
Doorbell buffer changes instead of wait for doorbell register changes.
This reduces the number of MMIOs.
In nvme_process_db(), update the shadow doorbell buffer value with
the doorbell register value if it is the admin queue. This is a hack
since hosts like Linux NVMe driver and SPDK do not use shadow
doorbell buffer for the admin queue. Copying the doorbell register
value to the shadow doorbell buffer allows us to support these hosts
as well as spec-compliant hosts that use shadow doorbell buffer for
the admin queue.
Signed-off-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[k.jensen: rebased]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
'namespace' is misspelled in a bunch of places.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-3-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The internally maintained AEN mask is not cleared on reset. Fix this.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This reverts commit d97eee64fe.
The emulated controller correctly accounts for not including bit buckets
in the controller-to-host data transfer, however it doesn't correctly
account for the holes for the on-disk data offsets.
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The SRIOV series exposed an issued with how CC register writes are
handled and how CSTS is set in response to that. Specifically, after
applying the SRIOV series, the controller could end up in a state with
CC.EN set to '1' but with CSTS.RDY cleared to '0', causing drivers to
expect CSTS.RDY to transition to '1' but timing out.
Clean this up.
Reviewed-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch updates the initialization place for the AER queue, so it’s
initialized once, at controller initialization, and not every time
controller is enabled.
While the original version works for a non-SR-IOV device, as it’s hard
to interact with the controller if it’s not enabled, the multiple
reinitialization is not necessarily correct.
With the SR/IOV feature enabled a segfault can happen: a VF can have its
controller disabled, while a namespace can still be attached to the
controller through the parent PF. An event generated in such case ends
up on an uninitialized queue.
While it’s an interesting question whether a VF should support AER in
the first place, I don’t think it must be answered today.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With the new command one can:
- assign flexible resources (queues, interrupts) to primary and
secondary controllers,
- toggle the online/offline state of given controller.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With four new properties:
- sriov_v{i,q}_flexible,
- sriov_max_v{i,q}_per_vf,
one can configure the number of available flexible resources, as well as
the limits. The primary and secondary controller capability structures
are initialized accordingly.
Since the number of available queues (interrupts) now varies between
VF/PF, BAR size calculation is also adjusted.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
An NVMe device with SR-IOV capability calculates the BAR size
differently for PF and VF, so it makes sense to extract the common code
to a separate function.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The n->reg_size parameter unnecessarily splits the BAR0 size calculation
in two phases; removed to simplify the code.
With all the calculations done in one place, it seems the pow2ceil,
applied originally to reg_size, is unnecessary. The rounding should
happen as the last step, when BAR size includes Nvme registers, queue
registers, and MSIX-related space.
Finally, the size of the mmio memory region is extended to cover the 1st
4KiB padding (see the map below). Access to this range is handled as
interaction with a non-existing queue and generates an error trace, so
actually nothing changes, while the reg_size variable is no longer needed.
--------------------
| BAR0 |
--------------------
[Nvme Registers ]
[Queues ]
[power-of-2 padding] - removed in this patch
[4KiB padding (1) ]
[MSIX TABLE ]
[4KiB padding (2) ]
[MSIX PBA ]
[power-of-2 padding]
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The NVMe device defines two properties: max_ioqpairs, msix_qsize. Having
them as constants is problematic for SR-IOV support.
SR-IOV introduces virtual resources (queues, interrupts) that can be
assigned to PF and its dependent VFs. Each device, following a reset,
should work with the configured number of queues. A single constant is
no longer sufficient to hold the whole state.
This patch tries to solve the problem by introducing additional
variables in NvmeCtrl’s state. The variables for, e.g., managing queues
are therefore organized as:
- n->params.max_ioqpairs – no changes, constant set by the user
- n->(mutable_state) – (not a part of this patch) user-configurable,
specifies number of queues available _after_
reset
- n->conf_ioqpairs - (new) used in all the places instead of the ‘old’
n->params.max_ioqpairs; initialized in realize()
and updated during reset() to reflect user’s
changes to the mutable state
Since the number of available i/o queues and interrupts can change in
runtime, buffers for sq/cqs and the MSIX-related structures are
allocated big enough to handle the limits, to completely avoid the
complicated reallocation. A helper function (nvme_update_msixcap_ts)
updates the corresponding capability register, to signal configuration
changes.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch implements the Function Level Reset, a feature currently not
implemented for the Nvme device, while listed as a mandatory ("shall")
in the 1.4 spec.
The implementation reuses FLR-related building blocks defined for the
pci-bridge module, and follows the same logic:
- FLR capability is advertised in the PCIE config,
- custom pci_write_config callback detects a write to the trigger
register and performs the PCI reset,
- which, eventually, calls the custom dc->reset handler.
Depending on reset type, parts of the state should (or should not) be
cleared. To distinguish the type of reset, an additional parameter is
passed to the reset function.
This patch also enables advertisement of the Power Management PCI
capability. The main reason behind it is to announce the no_soft_reset=1
bit, to signal SR-IOV support where each VF can be reset individually.
The implementation purposedly ignores writes to the PMCS.PS register,
as even such naïve behavior is enough to correctly handle the D3->D0
transition.
It’s worth to note, that the power state transition back to to D3, with
all the corresponding side effects, wasn't and stil isn't handled
properly.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Introduce handling for Secondary Controller List (Identify command with
CNS value of 15h).
Secondary controller ids are unique in the subsystem, hence they are
reserved by it upon initialization of the primary controller to the
number of sriov_max_vfs.
ID reservation requires the addition of an intermediate controller slot
state, so the reserved controller has the address 0xFFFF.
A secondary controller is in the reserved state when it has no virtual
function assigned, but its primary controller is realized.
Secondary controller reservations are released to NULL when its primary
controller is unregistered.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Implementation of Primary Controller Capabilities data
structure (Identify command with CNS value of 14h).
Currently, the command returns only ID of a primary controller.
Handling of remaining fields are added in subsequent patches
implementing virtualization enhancements.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.
Essentially, it allows to define the maximum number of virtual functions
supported by the NVMe controller via sriov_max_vfs parameter.
Passing a non-zero value to sriov_max_vfs triggers reporting of SR-IOV
capability by a physical controller and ARI capability by both the
physical and virtual function devices.
NVMe controllers created via virtual functions mirror functionally
the physical controller, which may not entirely be the case, thus
consideration would be needed on the way to limit the capabilities of
the VF.
NVMe subsystem is required for the use of SR-IOV.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
NVMe command set specification for end-to-end data protection formatted
namespace states:
o If the Reference Tag Check bit of the PRCHK field is set to ‘1’ and
the namespace is formatted for Type 3 protection, then the
controller:
▪ should not compare the protection Information Reference Tag
field to the computed reference tag; and
▪ may ignore the ILBRT and EILBRT fields. If a command is
aborted as a result of the Reference Tag Check bit of the
PRCHK field being set to ‘1’, then that command should be
aborted with a status code of Invalid Protection Information,
but may be aborted with a status code of Invalid Field in
Command.
Currently qemu compares reftag in the nvme_dif_prchk function whenever
Reference Tag Check bit is set in the command. For type 3 namespaces
however, caller of nvme_dif_prchk - nvme_dif_check does not increment
reftag for each subsequent logical block. That way commands incorporating
more than one logical block for type 3 formatted namespaces with reftag
check bit set, always fail with End-to-end Reference Tag Check Error.
Comply with spec by handling case of set Reference Tag Check
bit in the type 3 formatted namespace.
Fixes: 146f720c55 ("hw/block/nvme: end-to-end data protection")
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The Linux kernel quirks the QEMU NVMe controller pretty heavily because
of the namespace identifier mess. Since this is now fixed, bump the
firmware revision number to allow the quirk to be disabled for this
revision.
As of now, bump the firmware revision number to be equal to the QEMU
release version number.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not report the "null uuid" (all zeros) in the namespace
identification descriptors.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not default to generate an UUID for namespaces if it is not
explicitly specified.
This is a technically a breaking change in behavior. However, since the
UUID changes on every VM launch, it is not spec compliant and is of
little use since the UUID cannot be used reliably anyway and the
behavior prior to this patch must be considered buggy.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
We cannot provide auto-generated unique or persistent namespace
identifiers (EUI64, NGUID, UUID) easily. Since 6.1, namespaces have been
assigned a generated EUI64 of the form "52:54:00:<namespace counter>".
This is will be unique within a QEMU instance, but not globally.
Revert that this is assigned automatically and immediately deprecate the
compatibility parameter. Users can opt-in to this with the
`eui64-default=on` device parameter or set it explicitly with
`eui64=UINT64`.
Cc: libvir-list@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The Identify Controller Serial Number (SN) is the serial number for the
NVM subsystem and must be the same across all controller in the NVM
subsystem.
Enforce this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Pass the right constant to nvme_smart_event(). The NVME_AER* values hold
the bit position in the SMART byte, not the shifted value that we expect
it to be in nvme_smart_event().
Fixes: c62720f137 ("hw/block/nvme: trigger async event during injecting smart warning")
Acked-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Current implementation have problem in the read part of copy command.
Because there is no metadata mangling before nvme_dif_check invocation,
reftag error could be thrown for blocks of namespace that have not been
previously written to.
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since there is no return after nvme_dsm_cb invocation, metadata
associated with non-zero block range is currently zeroed. Also this
behaviour leads to segfault since we schedule iocb->bh two times.
First when entering nvme_dsm_cb with iocb->idx == iocb->nr and
second because of missing return on call stack unwinding by calling
blk_aio_pwrite_zeroes and subsequent nvme_dsm_cb callback.
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since nlbas is of type int, it does not work with large namespace size
values, e.g., 9 TB size of file backing namespace and 8 byte metadata
with 4096 bytes lbasz gives negative nlbas value, which is later
promoted to negative int64_t type value and results in negative
ns->moff which breaks namespace
Signed-off-by: Dmitry Tikhov <ddtikhov@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
This adds support for one possible new protection information format
introduced in TP4068 (and integrated in NVMe 2.0): the 64-bit CRC guard
and 48-bit reference tag. This version does not support storage tags.
Like the CRC16 support already present, this uses a software
implementation of CRC64 (so it is naturally pretty slow). But its good
enough for verification purposes.
This may go nicely hand-in-hand with the support that Keith submitted
for the Linux kernel[1].
[1]: https://lore.kernel.org/linux-nvme/20220126165214.GA1782352@dhcp-10-100-145-180.wdc.com/T/
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
A subsequent patch will introduce a new tuple size; so add a helper and
use that instead of sizeof() and magic numbers.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for up to 64 LBA formats through the LBAFEE field of the
Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
There is no need to extract the format command parameters for each
namespace. Move it to the entry point.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for getting and setting the Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for TP 4076 ("Zoned Random Write Area"), v2021.08.23
("Ratified").
This adds three new namespace parameters: "zoned.numzrwa" (number of
zrwa resources, i.e. number of zones that can have a zrwa),
"zoned.zrwas" (zrwa size in LBAs), "zoned.zrwafg" (granularity in LBAs
for flushes).
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add struct for Zone Management Send in preparation for more zone send
flags.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
These buffers can be anything, not an array of chars,
so use the 'void *' type for them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The 'buf' argument is not modified, so better pass it as const type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This fixes CVE-2021-3929 "locally" by denying DMA to the iomem of the
device itself. This still allows DMA to MMIO regions of other devices
(e.g. doing P2P DMA to the controller memory buffer of another NVMe
device).
Fixes: CVE-2021-3929
Reported-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since commit 292e13142d, dma_buf_rw() returns a MemTxResult type.
Do not discard it, return it to the caller. Pass the previously
returned value (the QEMUSGList residual size, which was rarely used)
as an optional argument.
With this new API, SCSIRequest::residual might now be accessed via
a pointer. Since the size_t type does not have the same size on
32 and 64-bit host architectures, convert it to a uint64_t, which
is big enough to hold the residual size, and the type is constant
on both 32/64-bit hosts.
Update the few dma_buf_read() / dma_buf_write() callers to the new
API.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220117125130.131828-1-f4bug@amsat.org>
Update the obvious places where dma_addr_t should be used
(instead of uint64_t, hwaddr, size_t, int32_t types).
This allows to have &dma_addr_t type portable on 32/64-bit
hosts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220111184309.28637-11-f4bug@amsat.org>
Let devices specify transaction attributes when calling
dma_buf_read().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-13-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_write().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-12-philmd@redhat.com>
Change namespaces to be shared namespaces by default (parameter
shared=on). Keep shared=off for older machine types.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With commit 5ffbaeed16 ("hw/nvme: fix controller hot unplugging")
namespaces get moved from the controller to the subsystem if one
is specified.
That keeps the namespaces alive after a controller hot-unplug, but
after a controller hotplug we have to reconnect the namespaces
from the subsystem to the controller.
Fixes: 5ffbaeed16 ("hw/nvme: fix controller hot unplugging")
Cc: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
[k.jensen: only attach to shared and non-detached namespaces]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
