It makes no sense that we don't have the same configuration on both sides.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20230608224943.3877-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Extend query-migrate to provide throttle time and estimated
ring full time with dirty-limit capability enabled, through which
we can observe if dirty limit take effect during live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-8@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Implement dirty-limit convergence algo for live migration,
which is kind of like auto-converge algo but using dirty-limit
instead of cpu throttle to make migration convergent.
Enable dirty page limit if dirty_rate_high_cnt greater than 2
when dirty-limit capability enabled, Disable dirty-limit if
migration be canceled.
Note that "set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit"
commands are not allowed during dirty-limit live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-7@git.sr.ht>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This commit is prepared for the implementation of dirty-limit
convergence algo.
The detection logic of throttling condition can apply to both
auto-converge and dirty-limit algo, putting it's position
before the checking logic for auto-converge feature.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-6@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Check if block migration is running before throttling
guest down in auto-converge way.
Note that this modification is kind of like code clean,
because block migration does not depend on auto-converge
capability, so the order of checks can be adjusted.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-5@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce migration dirty-limit capability, which can
be turned on before live migration and limit dirty
page rate durty live migration.
Introduce migrate_dirty_limit function to help check
if dirty-limit capability enabled during live migration.
Meanwhile, refactor vcpu_dirty_rate_stat_collect
so that period can be configured instead of hardcoded.
dirty-limit capability is kind of like auto-converge
but using dirty limit instead of traditional cpu-throttle
to throttle guest down. To enable this feature, turn on
the dirty-limit capability before live migration using
migrate-set-capabilities, and set the parameters
"x-vcpu-dirty-limit-period", "vcpu-dirty-limit" suitably
to speed up convergence.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-4@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce "vcpu-dirty-limit" migration parameter used
to limit dirty page rate during live migration.
"vcpu-dirty-limit" and "x-vcpu-dirty-limit-period" are
two dirty-limit-related migration parameters, which can
be set before and during live migration by qmp
migrate-set-parameters.
This two parameters are used to help implement the dirty
page rate limit algo of migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-3@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce "x-vcpu-dirty-limit-period" migration experimental
parameter, which is in the range of 1 to 1000ms and used to
make dirtyrate calculation period configurable.
Currently with the "x-vcpu-dirty-limit-period" varies, the
total time of live migration changes, test results show the
optimal value of "x-vcpu-dirty-limit-period" ranges from
500ms to 1000 ms. "x-vcpu-dirty-limit-period" should be made
stable once it proves best value can not be determined with
developer's experiments.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-2@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
dirty_rate paraemter of hmp command "set_vcpu_dirty_limit" is invalid
if less than 0, so add parameter check for it.
Note that this patch also delete the unsolicited help message and
clean up the code.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-1@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This doubly linked list is common for all the multifd and migration
threads so we need to avoid concurrent access.
Add a mutex to protect the data from concurrent access. This fixes a
crash when removing two MigrationThread objects from the list at the
same time during cleanup of multifd threads.
Fixes: 671326201d ("migration: Introduce interface query-migrationthreads")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230607161306.31425-3-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We're about to add more functions to this file so make it use the same
coding style as the rest of the code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230607161306.31425-2-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Until libblkio 1.3.0, virtio-blk drivers had completion eventfd
notifications enabled from the start, but from the next releases
this is no longer the case, so we have to explicitly enable them.
In fact, the libblkio documentation says they could be disabled,
so we should always enable them at the start if we want to be
sure to get completion eventfd notifications:
By default, the driver might not generate completion events for
requests so it is necessary to explicitly enable the completion
file descriptor before use:
void blkioq_set_completion_fd_enabled(struct blkioq *q, bool enable);
I discovered this while trying a development version of libblkio:
the guest kernel hangs during boot, while probing the device.
Fixes: fd66dbd424 ("blkio: add libblkio block driver")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230725103744.77343-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Apache license is considered by some to be not compatible
with GPLv2+. Since QEMU as combined work is GPLv2-only,
these two files should be made compatible.
Reported-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/qemu-devel/ZEpKXncC%2Fe6FKRe9@redhat.com/
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-By: canokeys.org (http://canokeys.org) <contact@canokeys.org>
Acked-by: YuanYang Meng <mkfssion@mkfssion.com>
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When _FORTIFY_SOURCE=2, glibc version is 2.35, and GCC version is
12.1.0, the compiler complains as follows:
In file included from /usr/include/string.h:535,
from /home/alarm/q/var/qemu/include/qemu/osdep.h:99,
from ../crypto/block-luks.c:21:
In function 'memset',
inlined from 'qcrypto_block_luks_store_key' at ../crypto/block-luks.c:843:9:
/usr/include/bits/string_fortified.h:59:10: error: 'splitkeylen' may be used uninitialized [-Werror=maybe-uninitialized]
59 | return __builtin___memset_chk (__dest, __ch, __len,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
60 | __glibc_objsize0 (__dest));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
../crypto/block-luks.c: In function 'qcrypto_block_luks_store_key':
../crypto/block-luks.c:699:12: note: 'splitkeylen' was declared here
699 | size_t splitkeylen;
| ^~~~~~~~~~~
It seems the compiler cannot see that splitkeylen will not be used
when splitkey is NULL. Suppress the warning by initializing splitkeylen
even when splitkey stays NULL.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
hw/sd/sdhci: Default I/O ops to little endian
hw/mips/loongson3-virt: Only use default USB if available
hw/char/escc: Implement loopback mode to allow self-testing
target/mips: Avoid overruns and shifts by negative number
target/sparc: Handle FPRS correctly on big-endian hosts
target/tricore: Rename tricore_feature to avoid clash with libcapstone
-----BEGIN PGP SIGNATURE-----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=F+Wb
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-20230725' of https://github.com/philmd/qemu into staging
Misc patches queue
hw/sd/sdhci: Default I/O ops to little endian
hw/mips/loongson3-virt: Only use default USB if available
hw/char/escc: Implement loopback mode to allow self-testing
target/mips: Avoid overruns and shifts by negative number
target/sparc: Handle FPRS correctly on big-endian hosts
target/tricore: Rename tricore_feature to avoid clash with libcapstone
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmS/4ksACgkQ4+MsLN6t
# wN6OSg//cZY9C6fRXNNaIqkmnhjbaV6KLtjE7mOKp0RUyh3aN0dtTwWIjdJc0O5C
# iipHESYhcbHTiN/TxK0zXg4KgtKmtwqGsa3QTXGdTlSkTY/dMNioSpb7p82becu0
# fhCvGRLJ97j7/mhebiBNT/urrcG5h3n7CjA5IoFMMA4f+cajsGZHwmq5TTzc2ehy
# 4FuchjFUw+cgqU1peNYoqt2dfnxFg0EgKBSRikl8MyPf9lFzTlXOKbgd+qppG6hI
# 2fAUHyMqBkU22sAoK0eB0077LjgjPPQfmn8UPGkpGD5QZQcvBRNArg4fyHxCKTS7
# zOsO1Qc+4D2l2RJlIHgct2pmcHdT29TlTn2T4Lg900Hm09KelZh1XF+1BemCC13z
# cGWjPcYozvGFFiHlhazINtbGpB6XaP/Z3OwroRHRn+Mn3ss+FaU+j/p+4YlEVyFi
# 4yoEyjhNma6/hssmstifSQsaOf6XthzpS+XdKNB6G1b2WuRSc1Z59b2gcPBTwbXY
# B52lfI61nzSrP9pLuS8c/6hQXQvADIEndeWEcWZ50h3WW2Cemj9jTDVgfjWC4Vg9
# wV2U6NeTr+g54cSU5vcKiZrqsQHUoLiKbZFRJkXF7EEMbOErIQnyIS5l8xf71Pay
# YPxuPf1VprRiR07d+ZaA+wmEaBxLCUPEl1CEuu5NPVA9S4yIIWE=
# =F+Wb
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Jul 2023 15:55:07 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'misc-fixes-20230725' of https://github.com/philmd/qemu:
target/tricore: Rename tricore_feature
target/sparc: Handle FPRS correctly on big-endian hosts
target/mips: Avoid shift by negative number in page_table_walk_refill()
target/mips: Pass directory/leaf shift values to walk_directory()
target/mips/mxu: Avoid overrun in gen_mxu_q8adde()
target/mips/mxu: Avoid overrun in gen_mxu_S32SLT()
target/mips/mxu: Replace magic array size by its definition
hw/char/escc: Implement loopback mode
hw/mips: Improve the default USB settings in the loongson3-virt machine
hw/sd/sdhci: Do not force sdhci_mmio_*_ops onto all SD controllers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change is cosmetic. A comment is added explaining why we need to check for
the availability of function 0 when we hotplug a device.
CC: mst@redhat.com
CC: mjt@tls.msk.ru
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
this name is used by capstone and will lead to a build failure of QEMU,
when capstone is enabled. So we rename it to tricore_has_feature(), to
match has_feature() in translate.c.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1774
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
this name is used by capstone and will lead to a build failure of QEMU,
when capstone is enabled. So we rename it to tricore_has_feature(), to
match has_feature() in translate.c.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1774
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230721060605.76636-1-kbastian@mail.uni-paderborn.de>
In CPUSparcState we define the fprs field as uint64_t. However we
then refer to it in translate.c via a TCGv_i32 which we set up with
tcg_global_mem_new_ptr(). This means that on a big-endian host when
the guest does something to writo te the FPRS register this value
ends up in the wrong half of the uint64_t, and the QEMU C code that
refers to env->fprs sees the wrong value. The effect of this is that
guest code that enables the FPU crashes with spurious FPU Disabled
exceptions. In particular, this is why
tests/avocado/machine_sparc64_sun4u.py:Sun4uMachine.test_sparc64_sun4u
times out on an s390 host.
There are multiple ways we could fix this; since there are actually
only three bits in the FPRS register and the code in translate.c
would be a bit painful to convert to dealing with a TCGv_i64, change
the type of the CPU state struct field to match what translate.c is
expecting.
(None of the other fields referenced by the r32[] array in
sparc_tcg_init() have the wrong type.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230717103544.637453-1-peter.maydell@linaro.org>
Coverity points out that in page_table_walk_refill() we can
shift by a negative number, which is undefined behaviour
(CID 1452918, 1452920, 1452922). We already catch the
negative directory_shift and leaf_shift as being a "bail
out early" case, but not until we've already used them to
calculated some offset values.
The shifts can be negative only if ptew > 1, so make the
bail-out-early check look directly at that, and only
calculate the shift amounts and the offsets based on them
after we have done that check. This allows
us to simplify the expressions used to calculate the
shift amounts, use an unsigned type, and avoids the
undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[PMD: Check for ptew > 1, use unsigned type]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230717213504.24777-3-philmd@linaro.org>
We already evaluated directory_shift and leaf_shift in
page_table_walk_refill(), no need to do that again: pass
as argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230717213504.24777-2-philmd@linaro.org>
Coverity reports a potential overruns (CID 1517770):
Overrunning array "mxu_gpr" of 15 8-byte elements at
element index 4294967295 (byte offset 34359738367)
using index "XRb - 1U" (which evaluates to 4294967295).
Add a gen_extract_mxu_gpr() helper similar to
gen_load_mxu_gpr() to safely extract MXU registers.
Fixes: eb79951ab6 ("target/mips/mxu: Add Q8ADDE ... insns")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230712060806.82323-4-philmd@linaro.org>
Coverity reports a potential overrun (CID 1517769):
Overrunning array "mxu_gpr" of 15 8-byte elements at
element index 4294967295 (byte offset 34359738367)
using index "XRb - 1U" (which evaluates to 4294967295).
Use gen_load_mxu_gpr() to safely load MXU registers.
Fixes: ff7936f009 ("target/mips/mxu: Add S32SLT ... insns")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230712060806.82323-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230712060806.82323-2-philmd@linaro.org>
The firmware of the m68k next-cube machine uses the loopback mode
for self-testing the hardware and currently fails during this step.
By implementing the loopback mode, we can make the firmware pass
to the next step.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230716153519.31722-1-huth@tuxfamily.org>
It's possible to compile QEMU without the USB devices (e.g. when using
"--without-default-devices" as option for the "configure" script).
To be still able to run the loongson3-virt machine in default mode with
such a QEMU binary, we have to check here for the availability of the
OHCI controller first before instantiating the USB devices.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230714104903.284845-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since commit c0a55a0c9d "hw/sd/sdhci: Support big endian SD host controller
interfaces" sdhci_common_realize() forces all SD card controllers to use either
sdhci_mmio_le_ops or sdhci_mmio_be_ops, depending on the "endianness" property.
However, there are device models which use different MMIO ops: TYPE_IMX_USDHC
uses usdhc_mmio_ops and TYPE_S3C_SDHCI uses sdhci_s3c_mmio_ops.
Forcing sdhci_mmio_le_ops breaks SD card handling on the "sabrelite" board, for
example. Fix this by defaulting the io_ops to little endian and switch to big
endian in sdhci_common_realize() only if there is a matchig big endian variant
available.
Fixes: c0a55a0c9d ("hw/sd/sdhci: Support big endian SD host controller
interfaces")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <20230709080950.92489-1-shentey@gmail.com>
The "expected failure" tests for decodetree result in the
error messages from decodetree ending up in logs and in
V=1 output:
>>> MALLOC_PERTURB_=226 /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/x86/pyvenv/bin/python3 /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/scripts/decodetree.py --output-null --test-for-error /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/x86/../../tests/decode/err_argset1.decode
――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――― ✀ ――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/x86/../../tests/decode/err_argset1.decode:5: error: duplicate argument "a"
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
1/44 qemu:decodetree / err_argset1 OK 0.05s
This then produces false positives when scanning the
logfiles for strings like "error: ".
For the expected-failure tests, make decodetree print
"detected:" instead of "error:".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230720131521.1325905-1-peter.maydell@linaro.org
The curses display handles most control-X keys, and translates
them into their corresponding keycode. Here we recognize
a few that are missing, Ctrl-@ (null), Ctrl-\ (backslash),
Ctrl-] (right bracket), Ctrl-^ (caret), Ctrl-_ (underscore).
Signed-off-by: Sean Estabrooks <sean.estabrooks@gmail.com>
Message-id: CAHyVn3Bh9CRgDuOmf7G7Ngwamu8d4cVozAcB2i4ymnnggBXNmg@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of the code called from helper_exception_bkpt_insn() is written
assuming A-profile, but we will also call this helper on M-profile
CPUs when they execute a BKPT insn. This used to work by accident,
but recent changes mean that we will hit an assert when some of this
code calls down into lower level functions that end up calling
arm_security_space_below_el3(), arm_el_is_aa64(), and other functions
that now explicitly assert that the guest CPU is not M-profile.
Handle M-profile directly to avoid the assertions:
* in arm_debug_target_el(), M-profile debug exceptions always
go to EL1
* in arm_debug_exception_fsr(), M-profile always uses the short
format FSR (compare commit d7fe699be5, though in this case
the code in arm_v7m_cpu_do_interrupt() does not need to
look at the FSR value at all)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1775
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230721143239.1753066-1-peter.maydell@linaro.org
The POSIX definition of the 'read' utility requires that you
specify the variable name to set; omitting the name and
having it default to 'REPLY' is a bashism. If your system
sh is dash, then it will print an error message during build:
qemu/pc-bios/s390-ccw/../../scripts/git-submodule.sh: 106: read: arg count
Specify the variable name explicitly.
Fixes: fdb8fd8cb9 ("git-submodule: allow partial update of .git-submodule-status")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230720153038.1587196-1-peter.maydell@linaro.org
The implementation of the SMMUv3 has multiple places where it reads a
data structure from the guest and directly operates on it without
doing a guest-to-host endianness conversion. Since all SMMU data
structures are little-endian, this means that the SMMU doesn't work
on a big-endian host. In particular, this causes the Avocado test
machine_aarch64_virt.py:Aarch64VirtMachine.test_alpine_virt_tcg_gic_max
to fail on an s390x host.
Add appropriate byte-swapping on reads and writes of guest in-memory
data structures so that the device works correctly on big-endian
hosts.
As part of this we constrain queue_read() to operate only on Cmd
structs and queue_write() on Evt structs, because in practice these
are the only data structures the two functions are used with, and we
need to know what the data structure is to be able to byte-swap its
parts correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230717132641.764660-1-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
The virtio-gpu test is known to be flaky - that's why we also did
not enable the test_s390x_fedora in the gitlab CI. However, a flaky
test can also be annoying when testing locally, so let's rather skip
this subtest by default and start running the test_s390x_fedora test
in the gitlab CI again (since the other things that are tested here
are quite valuable).
Message-Id: <20230724084851.24251-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test in tests/avocado/machine_loongarch.py is currently failing
on big endian hosts like s390x. By comparing the traces between running
the QEMU_EFI.fd bios on a s390x and on a x86 host, it's quickly obvious
that the CSRRD instruction for the CPUID is behaving differently. And
indeed: The code currently does a long read (i.e. 64 bit) from the
address that points to the CPUState->cpu_index field (with tcg_gen_ld_tl()
in the trans_csrrd() function). But this cpu_index field is only an "int"
(i.e. 32 bit). While this dirty pointer magic works on little endian hosts,
it of course fails on big endian hosts. Fix it by using a proper helper
function instead.
Message-Id: <20230720175307.854460-1-thuth@redhat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests from tests/avocado/migration.py do not work at all
on s390x - the bios shuts down immediately when it cannot find
a boot disk, so there is nothing left to migrate here. For doing
a proper migration test, we would need a proper payload, but we
already do such tests in the migration *qtest*, so it is unnecessary
to redo such a test here, thus let's simply remove this test.
Message-Id: <20230721164346.10112-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-15-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-14-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-13-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-12-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
