The `if not probe_proc_self_mem` check never passes, because
probe_proc_self_mem is a function object, which is a truthy value.
Add parentheses in order to perform a function call.
Fixes: dc84d50a7f9b ("tests/tcg: Add the PROT_NONE gdbstub test")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240131220245.235993-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make sure that qemu gdbstub, like gdbserver, allows reading from and
writing to PROT_NONE pages.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240129093410.3151-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both the report() function as well as the initial gdbstub test sequence
are copy-pasted into ~10 files with slight modifications. This
indicates that they are indeed generic, so factor them out. While
at it, add a few newlines to make the formatting closer to PEP-8.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240129093410.3151-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When icount and ibreak exceptions are due to happen on the same address
icount has higher precedence.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231130171920.3798954-3-jcmvbkbc@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
make check-tcg fails on Fedora with:
vtimer.c:9:10: fatal error: inttypes.h: No such file or directory
Fedora has a minimal aarch64 cross-compiler, which satisfies the
configure checks, so it's chosen instead of the dockerized one.
There is no cross-version of inttypes.h, however.
Fix by using stdint.h instead. The test does not require anything
from inttypes.h anyway.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240108125030.58569-1-iii@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a small test to prevent regressions. Userspace runs in primary
mode, so LAE should always set the access register to 0.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240111092328.929421-3-iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ALU instructions can write to both memory and flags. If the CC_SRC*
and CC_DST locations have been written already when a memory access
causes a fault, the value in CC_SRC* and CC_DST might be interpreted
with the wrong CC_OP (the one that is in effect before the instruction.
Besides just using the wrong result for the flags, something like
subtracting -1 can have disastrous effects if the current CC_OP is
CC_OP_EFLAGS: this is because QEMU does not expect bits outside the ALU
flags to be set in CC_SRC, and env->eflags can end up set to all-ones.
In the case of the attached testcase, this sets IOPL to 3 and would
cause an assertion failure if SUB is moved to the new decoder.
This mechanism is not really needed for BMI instructions, which can
only write to a register, but put it to use anyway for cleanliness.
In the case of BZHI, the code has to be modified slightly to ensure
that decode->cc_src is written, otherwise the new assertions trigger.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit edac4d8a16 back in 2015 when we added support for
the virtual timer offset CNTVOFF_EL2, we didn't correctly update
the timer-recalculation code that figures out when the timer
interrupt is next going to change state. We got it wrong in
two ways:
* for the 0->1 transition, we didn't notice that gt->cval + offset
can overflow a uint64_t
* for the 1->0 transition, we didn't notice that the transition
might now happen before the count rolls over, if offset > count
In the former case, we end up trying to set the next interrupt
for a time in the past, which results in QEMU hanging as the
timer fires continuously.
In the latter case, we would fail to update the interrupt
status when we are supposed to.
Fix the calculations in both cases.
The test case is Alex Bennée's from the bug report, and tests
the 0->1 transition overflow case.
Fixes: edac4d8a16 ("target-arm: Add CNTVOFF_EL2")
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/60
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231120173506.3729884-1-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The reason the ppc64 and s390x test where failing was because gdb
hides them although they are still accessible via regnum. We can
re-arrange the test a little bit and include these two arches in our
test.
We also need to be a bit more careful handling remote-registers as the
format isn't easily parsed with pure white space separation. Once we
fold types like "long long" and "long double" into a single word we
can now assert all registers are either listed or elided.
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <qemu-s390x@nongnu.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: <qemu-ppc@nongnu.org>
Cc: Luis Machado <luis.machado@arm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231121153606.542101-1-alex.bennee@linaro.org>
This still remains a MANUAL test due to blocking issues.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-13-alex.bennee@linaro.org>
To make it easier to test 32 bit Arm softmmu issues implement a basic
boot.S so we can build the multiarch tests. Currently CHECK_UNALIGNED
is disabled as I haven't got the right magic set for it to work.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-12-alex.bennee@linaro.org>
Prepare for expanding the arm system tests by cleaning up the test
directory.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-11-alex.bennee@linaro.org>
We need to ensure we squash the serial port if we want to hand craft
our muxed input. As a bonus emit the example with a V=1 build to make
it easier for people to figure out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-7-alex.bennee@linaro.org>
The patch below fixes a bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2
macros in target/ppc/fpu_helper.c where a non-NaN floating point value from the
source vector is incorrectly converted to 0, 0x80000000, or 0x8000000000000000
instead of the expected value if a preceding source floating point value from
the same source vector was a NaN.
The bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2 macros in
target/ppc/fpu_helper.c was introduced with commit c3f24257e3.
This patch also adds a new vsx_f2i_nan test in tests/tcg/ppc64 that checks that
the VSX xvcvspsxws, xvcvspuxws, xvcvspsxds, xvcvspuxds, xvcvdpsxws, xvcvdpuxws,
xvcvdpsxds, and xvcvdpuxds instructions correctly convert non-NaN floating point
values to integer values if the source vector contains NaN floating point values.
Fixes: c3f24257e3 ("target/ppc: Clear fpstatus flags on helpers missing it")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1941
Signed-off-by: John Platts <john_platts@hotmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
nios2 signal tests are broken again:
retry.py -n 10 -c -- ./qemu-nios2 ./tests/tcg/nios2-linux-user/signals
Results summary:
0: 8 times (80.00%), avg time 2.254 (0.00 varience/0.00 deviation)
-11: 2 times (20.00%), avg time 0.253 (0.00 varience/0.00 deviation)
Ran command 10 times, 8 passes
This wasn't picked up by CI as we don't have a docker container that
can build QEMU with the nios2 compiler. I don't have time to bisect
the breakage and the target is orphaned anyway so take the easy route
and revert it.
This reverts commit 20e7524ff9.
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-23-alex.bennee@linaro.org>
We already do a couple of "info registers" for specific tests but this
is a more comprehensive multiarch test. It also has some output
helpful for debugging the gdbstub by showing which XML features are
advertised and what the underlying register numbers are.
My initial motivation was to see if there are any duplicate register
names exposed via the gdbstub while I was reviewing the proposed
register interface for TCG plugins.
Mismatches between the xml and remote-desc are reported for debugging
but do not fail the test.
We also skip the tests for the following arches for now until we can
investigate and fix any issues:
- s390x (fails to read v0l->v15l, not seen in remote-registers)
- ppc64 (fails to read vs0h->vs31h, not seen in remote-registers)
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Luis Machado <luis.machado@linaro.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: qemu-s390x@nongnu.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-7-alex.bennee@linaro.org>
Add a test that tries different combinations of ADD LOGICAL WITH
CARRY instructions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20231106093605.1349201-6-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The previous change missed updating one of the increments and
one of the MemOps. Add a test case for all vector lengths.
Cc: qemu-stable@nongnu.org
Fixes: e6dd5e782b ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231031143215.29764-1-richard.henderson@linaro.org
[PMM: fixed checkpatch nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A build of GCC 13.2 will have stack protector enabled by default if it
was configured with --enable-default-ssp option. For such a compiler,
it is necessary to explicitly disable stack protector when linking
without standard libraries.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230731091042.139159-3-akihiko.odaki@daynix.com>
[AJB: fix comment string typo]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-3-alex.bennee@linaro.org>
Some instructions use YMM0 implicitly, or use YMM9 as a read-modify-write
register destination. Initialize those registers as well.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This can cause differences between native and QEMU execution, due
to ASLR.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unify HAVE_GDB_BIN (currently in config-host.mak) and
HOST_GDB_SUPPORTS_ARCH into a single GDB variable in
config-target.mak.
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
test-aes, sha1-vector and sha512-vector need not be conditional on
$(CROSS_CC_HAS_SVE), reorganize the "if"s to move them outside.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The system test shutdown uses the 'loongarch_virt_pm' region.
We can use the write AcpiFadtData.sleep_clt register to realize the shutdown.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20231012072351.1409344-1-gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
some insns use the result register implicitly as an input. Thus, we
could end up with data from the previous insn spilling over.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230913105326.40832-4-kbastian@mail.uni-paderborn.de>
RSx for d regs and e regs now use the same numbering. This makes sure
that mixing d and e registers in an insn test will not overwrite data
between registers.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230913105326.40832-2-kbastian@mail.uni-paderborn.de>
we would crash if width was 0 for these insns, as tcg_gen_deposit() is
undefined for that case. For TriCore, width = 0 is a mov from the src reg
to the dst reg, so we special case this here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230828112651.522058-9-kbastian@mail.uni-paderborn.de>
we don't want to exclude ISA v1.6.2 insns from our tests.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230828112651.522058-2-kbastian@mail.uni-paderborn.de>
For user-only mode we reveal a subset of the AArch64 ID registers
to the guest, to emulate the kernel's trap-and-emulate-ID-regs
handling. Update the feature bit masks to match upstream kernel
commit a48fa7efaf1161c1c.
None of these features are yet implemented by QEMU, so this
doesn't yet have a behavioural change, but implementation of
FEAT_MOPS and FEAT_HBC is imminent.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Motorola treats denormals with explicit integer bit set as
having unbiased exponent 0, unlike Intel which treats it as
having unbiased exponent 1 (more like all other IEEE formats
that have no explicit integer bit).
Add a flag on FloatFmt to differentiate the behaviour.
Reported-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With FEAT_FPAC, AUT* instructions that fail authentication
do not produce an error value but instead fault.
For pauth-2, install a signal handler and verify it gets called.
For pauth-4 and pauth-5, we are explicitly testing the error value,
so there's nothing to test with FEAT_FPAC, so exit early.
Adjust the makefile to use -cpu neoverse-v1, which has FEAT_EPAC
but not FEAT_FPAC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
$(HOST_CC) is only used to invoke the preprocessor, and $(CC) can be
used instead now that there is a Tricore C compiler. Remove the variable
from config-host.mak.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Check for availablility of more devices in qtests before using them
* Some other minor qtest fixes
-----BEGIN PGP SIGNATURE-----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=tZWg
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-08-31' of https://gitlab.com/thuth/qemu into staging
* Use precise selfmodifying code mode on s390x TCG
* Check for availablility of more devices in qtests before using them
* Some other minor qtest fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmTw5v4RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbX2DRAAo7NPNPQ2nsYDdYfKAGt8OSg1BHqh1RYH
# jvLiU5xrWQ3whmSJYw4rcSyBk4yC+lIjoXT6oBn6O40Q1r7OmrWgtrn9g//3SLHb
# Wfob5bZkmRiETDZNFFpYcpRPzElF3ZqIfwOhJ3zfmAQxqeTxpTnAuq2vI38pk3Hz
# 4pQR/j2IKZFmFt6cdYUaKi32odDK6ySKAFCKy9I8sz2hJgOXQRYBkjorDx+g+hoF
# o7DTGkA3uH2xXlLQKhbEGm5xQMlcBgTMb2XeguvRbb7g/Uc046homwm0r6rejDy5
# EgW9Kx3Y34QYZt51onqmA57MNNQboubHkSz9W2b57OX+IWA3VRncdBAxdGmubRTY
# Jb6LsBZSMdKQBXxgIP3DZjvH6MxYjA9Iy3YI7Mk+hJnDACkFVJOCPxS9acnmjYE5
# Nn935GmbYMazfci0c3zc/899hAGDNglD9Tf6ourBjl1WLQstefXhlpzkbGWqSFjF
# Tovpal+Rm6KLDFSfs6TsRp6+FF8a6C1k251Ai67adkiCYM/jKwVoiHrsUJeG0vyc
# 791x5+lixxkLUHu1qNYfEdxvaOE8guhXRt3zJIjmphio3v+RFBLbzC6lTzeZbTTv
# DpnnoFJ/tCzdLew7A1QuzuW361ywyKVE4Qp8HQfaJCOJT9aGgMdyoHlpgz0ojgJm
# fD8Vfl9GZFQ=
# =tZWg
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Aug 2023 15:16:14 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-08-31' of https://gitlab.com/thuth/qemu:
meson: test for CONFIG_TCG in config_all
subprojects/berkeley-testfloat-3: Update to fix a problem with compiler warnings
tests/qtest/bios-tables-test: Check for virtio-iommu device before using it
tests/qtest/netdev-socket: Avoid variable-length array in inet_get_free_port_multiple()
tests/qtest/usb-hcd-xhci-test: Check availability of devices before using them
tests/tcg/s390x: Test precise self-modifying code handling
target/s390x: Define TARGET_HAS_PRECISE_SMC
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since commit 139c1837db ("meson: rename included C source files
to .c.inc"), QEMU standard procedure for included C files is to
use *.c.inc.
Besides, since commit 6a0057aa22 ("docs/devel: make a statement
about includes") this is documented as the Coding Style:
If you do use template header files they should be named with
the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are
being included for expansion.
Therefore rename 'bti-crt.inc.c' as 'bti-crt.c.inc'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230606141252.95032-6-philmd@linaro.org>
Add small softmmu and user tests to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230807114921.438881-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
