This is necessary to provide discernible error messages to the caller.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240927104743.218468-2-jusual@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor setting up of dirty ring code in kvm_init() so that is can be
reused in the future patchsets.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/20240912061838.4501-1-anisinha@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While debugging an invalid configuration, I noticed that the clauses debug
ends up on stderr but the header ("The following clauses were found..."
ends up on stdout. This makes the contents of meson-logs/meson-log.txt
a bit confusing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been deprecated since 8.1; remove it and suggest using the 'local' file
system backend driver instead or virtiofsd.
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.
The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:
# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The includes where updated based on compile errors. Now, the inclusion of the
header roughly matches Kconfig dependencies:
# grep -r -e "select SERIAL_ISA"
hw/ppc/Kconfig: select SERIAL_ISA
hw/isa/Kconfig: select SERIAL_ISA
hw/sparc64/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA # for serial_hds_isa_init()
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-3-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to AMD's Speculative Return Stack Overflow whitepaper (link
below), the hypervisor should synthesize the value of IBPB_BRTYPE and
SBPB CPUID bits to the guest.
Support for this is already present in the kernel with commit
e47d86083c66 ("KVM: x86: Add SBPB support") and commit 6f0f23ef76be
("KVM: x86: Add IBPB_BRTYPE support").
Add support in QEMU to expose the bits to the guest OS.
host:
# cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
Mitigation: Safe RET
before (guest):
$ cpuid -l 0x80000021 -1 -r
0x80000021 0x00: eax=0x00000045 ebx=0x00000000 ecx=0x00000000 edx=0x00000000
^
$ cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
Vulnerable: Safe RET, no microcode
after (guest):
$ cpuid -l 0x80000021 -1 -r
0x80000021 0x00: eax=0x18000045 ebx=0x00000000 ecx=0x00000000 edx=0x00000000
^
$ cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
Mitigation: Safe RET
Reported-by: Fabian Vogt <fvogt@suse.de>
Link: https://www.amd.com/content/dam/amd/en/documents/corporate/cr/speculative-return-stack-overflow-whitepaper.pdf
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240805202041.5936-1-farosas@suse.de
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
identity_base variable is first initialzied to address 0xfffbc000 and then
kvm_vm_set_identity_map_addr() overrides this value to address 0xfeffc000.
The initial address to which the variable was initialized was never used. Clean
everything up, placing 0xfeffc000 in a preprocessor constant.
Reported-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_init() enables a lot of vm capabilities. Refactor them into separate
smaller functions. Energy MSR related operations also moved to its own
function. There should be no functional impact.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/20240903124143.39345-2-anisinha@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
error_report() is more appropriate for error situations. Replace fprintf with
error_report() and error_printf() as appropriate. Some improvement in error
reporting also happens as a part of this change. For example:
From:
$ ./qemu-system-x86_64 --accel kvm
Could not access KVM kernel module: No such file or directory
To:
$ ./qemu-system-x86_64 --accel kvm
qemu-system-x86_64: --accel kvm: Could not access KVM kernel module: No such file or directory
CC: qemu-trivial@nongnu.org
CC: zhao1.liu@intel.com
CC: armbru@redhat.com
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/20240828124539.62672-1-anisinha@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
is_host_cpu_intel() should return TRUE if the host cpu in Intel based, otherwise
it should return FALSE. Currently, it returns zero (FALSE) when the host CPU
is INTEL and non-zero otherwise. Fix the function so that it agrees more with
the semantics. Adjust the calling logic accordingly. RAPL needs Intel host cpus.
If the host CPU is not Intel baseed, we should report error.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/20240903080004.33746-1-anisinha@redhat.com
[While touching the code remove too many spaces from the second part of the
error. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_filer_msr() is only used from i386 kvm module. Make it static so that its
easy for developers to understand that its not used anywhere else.
Same for QEMURDMSRHandler, QEMUWRMSRHandler and KVMMSRHandlers definitions.
CC: philmd@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/20240903140045.41167-1-anisinha@redhat.com
[Make struct unnamed. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GCC is reporting a NULL pointer dereference when compiling aio_wait_kick()
with LTO.
The issue is that test-nested-aio-poll.c does not call qemu_init_main_loop().
It doesn't _need_ to because it never calls AIO_WAIT_WHILE(), but it seems
that LTO does not do enough dead-code elimination to catch that.
Fortunately aio_wait_kick() is only used in few places, and only in block
layer or system emulation code; and this test only needs the core event loop
functionality. It does not even need iothreads. So remove everything that
calls aio_wait_kick(), which is nice for coverage compared to adding the call
to qemu_init_main_loop().
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2434
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because the index value of the VMCS field encoding of FRED injected-event
data (one of the newly added VMCS fields for FRED transitions), 0x52, is
larger than any existing index value, raise the highest index value used
for any VMCS encoding to 0x52.
Because the index value of the VMCS field encoding of Secondary VM-exit
controls, 0x44, is larger than any existing index value, raise the highest
index value used for any VMCS encoding to 0x44.
Co-developed-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20240807081813.735158-4-xin@zytor.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add definitions of
1) VM-exit activate secondary controls bit
2) VM-entry load FRED bit
which are required to enable nested FRED.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20240807081813.735158-3-xin@zytor.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds support for the controller atomic parameters: AWUN and AWUPF. Atomic
Compare and Write Unit (ACWU) is not currently supported.
Writes that adhere to the ACWU and AWUPF parameters are guaranteed to be atomic.
New NVMe QEMU Parameters (See NVMe Specification for details):
atomic.dn (default off) - Set the value of Disable Normal.
atomic.awun=UINT16 (default: 0)
atomic.awupf=UINT16 (default: 0)
By default (Disable Normal set to zero), the maximum atomic write size is
set to the AWUN value. If Disable Normal is set, the maximum atomic write
size is set to AWUPF.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add a boolean prop (ctratt.mem) for setting CTRATT.MEM and default it to
unset (false) to keep existing behavior of the device intact.
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Arun Kumar <arun.kka@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Indicate that 'MDTS and Size Limits Exclude Metadata (MEM)' in the
Controller Attributes (CTRATT) I/O Command Set Independent Identify
Controller Data Structure.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: updated commit message]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Clear masked events from the aer queue when get log page is issued with
RAE 0 without checking for the presence of outstanding aer requests.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
[k.jensen: remove unnecessary QTAILQ_EMPTY check]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The controller already supports this decoding, so just set the
ID_CTRL.SGLS field accordingly.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
co_try_get_from_shres hasn't been used since it was added in
55fa54a789 ("co-shared-resource: protect with a mutex")
(Everyone uses the _locked version)
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-Id: <20240918124220.27871-1-dave@treblig.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
aio_task_pool_empty has been unused since it was added in
6e9b225f73 ("block: introduce aio task pool")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-Id: <20240917002007.330689-1-dave@treblig.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Allow overlapping request by removing the assert that made it
impossible. There are only two callers:
1. block_copy_task_create()
It already asserts the very same condition before calling
reqlist_init_req().
2. cbw_snapshot_read_lock()
There is no need to have read requests be non-overlapping in
copy-before-write when used for snapshot-access. In fact, there was no
protection against two callers of cbw_snapshot_read_lock() calling
reqlist_init_req() with overlapping ranges and this could lead to an
assertion failure [1].
In particular, with the reproducer script below [0], two
cbw_co_snapshot_block_status() callers could race, with the second
calling reqlist_init_req() before the first one finishes and removes
its conflicting request.
[0]:
> #!/bin/bash -e
> dd if=/dev/urandom of=/tmp/disk.raw bs=1M count=1024
> ./qemu-img create /tmp/fleecing.raw -f raw 1G
> (
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev raw,node-name=node0,file.driver=file,file.filename=/tmp/disk.raw \
> --blockdev raw,node-name=node1,file.driver=file,file.filename=/tmp/fleecing.raw \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "copy-before-write", "file": "node0", "target": "node1", "node-name": "node3" } }
> {"execute": "blockdev-add", "arguments": { "driver": "snapshot-access", "file": "node3", "node-name": "snap0" } }
> {"execute": "nbd-server-start", "arguments": {"addr": { "type": "unix", "data": { "path": "/tmp/nbd.socket" } } } }
> {"execute": "block-export-add", "arguments": {"id": "exp0", "node-name": "snap0", "type": "nbd", "name": "exp0"}}
> EOF
> ) &
> sleep 5
> while true; do
> ./qemu-nbd -d /dev/nbd0
> ./qemu-nbd -c /dev/nbd0 nbd:unix:/tmp/nbd.socket:exportname=exp0 -f raw -r
> nbdinfo --map 'nbd+unix:///exp0?socket=/tmp/nbd.socket'
> done
[1]:
> #5 0x000071e5f0088eb2 in __GI___assert_fail (...) at ./assert/assert.c:101
> #6 0x0000615285438017 in reqlist_init_req (...) at ../block/reqlist.c:23
> #7 0x00006152853e2d98 in cbw_snapshot_read_lock (...) at ../block/copy-before-write.c:237
> #8 0x00006152853e3068 in cbw_co_snapshot_block_status (...) at ../block/copy-before-write.c:304
> #9 0x00006152853f4d22 in bdrv_co_snapshot_block_status (...) at ../block/io.c:3726
> #10 0x000061528543a63e in snapshot_access_co_block_status (...) at ../block/snapshot-access.c:48
> #11 0x00006152853f1a0a in bdrv_co_do_block_status (...) at ../block/io.c:2474
> #12 0x00006152853f2016 in bdrv_co_common_block_status_above (...) at ../block/io.c:2652
> #13 0x00006152853f22cf in bdrv_co_block_status_above (...) at ../block/io.c:2732
> #14 0x00006152853d9a86 in blk_co_block_status_above (...) at ../block/block-backend.c:1473
> #15 0x000061528538da6c in blockstatus_to_extents (...) at ../nbd/server.c:2374
> #16 0x000061528538deb1 in nbd_co_send_block_status (...) at ../nbd/server.c:2481
> #17 0x000061528538f424 in nbd_handle_request (...) at ../nbd/server.c:2978
> #18 0x000061528538f906 in nbd_trip (...) at ../nbd/server.c:3121
> #19 0x00006152855a7caf in coroutine_trampoline (...) at ../util/coroutine-ucontext.c:175
Cc: qemu-stable@nongnu.org
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240712140716.517911-1-f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
In the context of backup fleecing, discarding the source will not work
when the fleecing image has a larger granularity than the one used for
block-copy operations (can happen if the backup target has smaller
cluster size), because cbw_co_pdiscard_snapshot() will align down the
discard requests and thus effectively ignore then.
To make @discard-source work in such a scenario, allow specifying the
minimum cluster size used for block-copy operations and thus in
particular also the granularity for discard requests to the source.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240711120915.310243-3-f.ebner@proxmox.com>
[vsementsov: switch version to 9.2 in QAPI doc]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
In the context of backup fleecing, discarding the source will not work
when the fleecing image has a larger granularity than the one used for
block-copy operations (can happen if the backup target has smaller
cluster size), because cbw_co_pdiscard_snapshot() will align down the
discard requests and thus effectively ignore then.
To make @discard-source work in such a scenario, allow specifying the
minimum cluster size used for block-copy operations and thus in
particular also the granularity for discard requests to the source.
The type 'size' (corresponding to uint64_t in C) is used in QAPI to
rule out negative inputs and for consistency with already existing
@cluster-size parameters. Since block_copy_calculate_cluster_size()
uses int64_t for its result, a check that the input is not too large
is added in block_copy_state_new() before calling it. The calculation
in block_copy_calculate_cluster_size() is done in the target int64_t
type.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240711120915.310243-2-f.ebner@proxmox.com>
[vsementsov: switch version to 9.2 in QAPI doc]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
GitLab lets a CI job create its own collapsible log sections by
emitting special escape codes, as documented here:
https://docs.gitlab.com/ee/ci/yaml/script.html#expand-and-collapse-job-log-sections
Use these to make "configure", "build" and "test" separate
collapsible stages.
As recommended by the GitLab docs, we use some shell which is
sourced in the CI job to define functions to emit the magic
lines that start and end sections, to hide the ugliness of
the printf lines from the log.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240918125449.3125571-3-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the native_build_job_template we have separate steps in the script
for the build and the test steps. This is helpful because then
gitlab will give separate timestamps in the log view for each, and
you can see how long it took to compile vs how long to test. In the
templates in crossbuild-template.yml, however, we do both the build
and test in a single 'make' invocation, and so we don't get the
separate timing information.
Split the build and test, in the same way we do in the native build
template.
This will also give us a place to separate out how parallel we want
to do the build by default from how parallel we want to do the tests
by default, which might be helpful in future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240918125449.3125571-2-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-35-pierrick.bouvier@linaro.org>
[thuth: Split long line to avoid checkpatch error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-34-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-33-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-32-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240919044641.386068-31-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-30-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-29-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-28-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
