A future patch will add support for multiple gluster servers. Existing
terminology is a bit unusual in relation to what names are used by
other networked devices, and doesn't map very well to the terminology
we expect to use for multiple servers. Therefore, rename the following
options:
'server' -> 'host'
'image' -> 'path'
'volname' -> 'volume'
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1468947453-5433-2-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
There are 2 deficiencies here:
- mirror_iteration could start several requests inside. Thus we could
simply have more in_flight requests than MAX_IN_FLIGHT.
- keeping this in mind throttling in mirror_run which is checking
s->in_flight == MAX_IN_FLIGHT is wrong.
The patch adds the check and throttling into mirror_iteration and fixes
the check in mirror_run() to be sure.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1466598927-5990-1-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit e648dc95c28fbca12e67be26a1fc4b9a0676c3fe)
We should not take into account zero blocks for delay calculations.
They are not read and thus IO throttling is not required. In the
other case VM migration with 16 Tb QCOW2 disk with 4 Gb of data takes
days.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-9-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
With a bdrv_co_write_zeroes method on a target BDS and when this method
is working as indicated by the bdrv_can_write_zeroes_with_unmap(), zeroes
will not be placed into the wire. Thus the target could be very efficiently
zeroed out. This should be done with the largest chunk possible.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-8-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
There is no need to scan allocation tables if we have mark_all_dirty flag
set. Just mark it all dirty.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-7-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
All .bdrv_co_write_zeroes callbacks nowadays work perfectly even
with backing store attached. If future new callbacks would be unable to do
that - they have a chance to block this in bdrv_get_info().
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-6-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
The code inside the helper will be extended in the next patch. mirror_run
itself is overbloated at the moment.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-5-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
The patch also places last_pause_ns from stack in mirror_run into
MirrorBlockJob structure. This helper will be useful in next patches.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468503209-19498-4-git-send-email-den@openvz.org
CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
CC: Eric Blake <eblake@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
We keep here the sum of int fields. Thus this could easily overflow,
especially when we will start sending big requests in next patches.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-3-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Underlying HBitmap operates even with uint64_t. Thus this change is safe.
This would be useful f.e. to mark entire bitmap dirty in one call.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
disas/bfd.h defines ATTRIBUTE_UNUSED, but unfortunately the
ALSA system headers also define this macro, which means that
you can get a compilation failure if building with ALSA and
any files happen to include the alsa headers before bfd.h
rather than the other way around.
This is unfortunate namespace pollution by the ALSA headers but
we can work around it. Add an #ifndef guard to bfd.h and remove
the unnecessary extra definition in disas/arm.c to fix this.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468937076-21503-1-git-send-email-peter.maydell@linaro.org
Version: GnuPG v1
iQEcBAABAgAGBQJXjZGEAAoJEO8Ells5jWIR8z8H/0TDJyMKdRsq2STHKpyAyqyy
LSeqP90hwoe9q9D0oeaQtmqxkETZl/vMIfJjS4wFnN0GJYXFQsZyq3MdiOL+4G46
lgfIofSFogUG/wow+0Sklgm+KjeVFsbwGz2E+t45P4FEgy6HjzdWQ6jKAcpa4Bnr
fd8DwlxCENteI2YeO9cyzYUNvnToJWsvI+dqKbctqPflzFMcVEehq+ExEVqgdqpk
84MNcQtHIRGUpfahz8TGkqQsdclvPke6B3DLdOWwi9nun9OZ/RJEinS22sahBuIV
3aG7IQaUoHjvnbwx6ItRTQlv7gXAiVWg9hUDYexsyX6rtMzzDKd751ACXqv4qWw=
=sVRr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 19 Jul 2016 03:33:40 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
e1000e: fix building without CONFIG_VMXNET3_PCI
MAINTAINERS: release Scott from being a rocker maintainer
tap: fix memory leak on failure to create a multiqueue tap device
net: fix incorrect argument to iov_to_buf
net: fix incorrect access to pointer
e1000e: fix incorrect access to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One fix for 2.7-rc0 which hides the ARI extended capability, fixing
multifunction support in PCIe configurations where the assigned device
function topology does not match the host (Alex Williamson)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=40ci
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20160718.0' into staging
VFIO update 2016-07-18
One fix for 2.7-rc0 which hides the ARI extended capability, fixing
multifunction support in PCIe configurations where the assigned device
function topology does not match the host (Alex Williamson)
# gpg: Signature made Mon 18 Jul 2016 18:02:27 BST
# gpg: using RSA key 0x239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22
* remotes/awilliam/tags/vfio-update-20160718.0:
vfio/pci: Hide ARI capability
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
'HF_SOFTMMU_MASK' is only set when 'CONFIG_SOFTMMU' is defined. So
there's no need in this flag: test 'CONFIG_SOFTMMU' instead.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160715175852.30749-6-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
until now the allocation map was used only as a hint if a cluster
is allocated or not. If a block was not allocated (or Qemu had
no info about the allocation status) a get_block_status call was
issued to check the allocation status and possibly avoid
a subsequent read of unallocated sectors. If a block known to be
allocated the get_block_status call was omitted. In the other case
a get_block_status call was issued before every read to avoid
the necessity for a consistent allocation map. To avoid the
potential overhead of calling get_block_status for each and
every read request this took only place for the bigger requests.
This patch enhances this mechanism to cache the allocation
status and avoid calling get_block_status for blocks where
the allocation status has been queried before. This allows
for bypassing the read request even for smaller requests and
additionally omits calling get_block_status for known to be
unallocated blocks.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-3-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
when setting clusters as alloacted the boundaries have
to be expanded. As Paolo pointed out the calculation of
the number of clusters is wrong:
Suppose cluster_sectors is 2, sector_num = 1, nb_sectors = 6:
In the "mark allocated" case, you want to set 0..8, i.e.
cluster_num=0, nb_clusters=4.
0--.--2--.--4--.--6--.--8
<--|_________________|--> (<--> = expanded)
Instead you are setting nb_clusters=3, so that 6..8 is not marked.
0--.--2--.--4--.--6--.--8
<--|______________|!!! (! = wrong)
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-2-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the README file to markdown so that it makes the github page look
prettier. I know that github repo is a mirror and not the official
repo, but I think it doesn't hurt to have it in markdown format.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160715043111.29007-1-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Due to changes in flush behaviour clean disks stopped generating
flush_to_disk events and IDE and AHCI tests that test flush commands
started to fail.
This change adds additional DMA writes to affected tests before sending
flush commands so that bdrv_flush actually generates flush_to_disk event.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-4-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
The following sequence of tests discovered a problem in IDE emulation:
1. Send DMA write to IDE device 0
2. Send CMD_FLUSH_CACHE to same IDE device which will be failed by block
layer using blkdebug script in tests/ide-test:test_retry_flush
When doing DMA request ide/core.c will set s->retry_unit to s->unit in
ide_start_dma. When dma completes ide_set_inactive sets retry_unit to -1.
After that ide_flush_cache runs and fails thanks to blkdebug.
ide_flush_cb calls ide_handle_rw_error which asserts that s->retry_unit
== s->unit. But s->retry_unit is still -1 after previous DMA completion
and flush does not use anything related to retry.
This patch restricts retry unit assertion only to ops that actually use
retry logic.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-3-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Code to set and clear state associated with retry in moved into
ide_set_retry and ide_clear_retry to make adding retry setups easier.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Homogenizes the command capabilities with QMP.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Events with the 'vcpu' property are conditionally emitted according to
their per-vCPU state. Other events are emitted normally based on their
global tracing state.
Note that the per-vCPU condition check applies to all tracing backends.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Eliminates a future compilation error when UI code includes the tracing
headers (indirectly pulling "disas/bfd.h" through "qom/cpu.h") and
GLib's i18n '_' macro.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A new event attribute 'cpu_id' is added to have a separate ID
space ('TRACE_VCPU_*') for all events with the 'vcpu' property.
These are later used to identify which events are enabled on each vCPU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
Also fixed coding style on for(;;) and else statement as suggested by
Eric Blake <eblake@redhat.com> since the patch modifies these lines or
close enough.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860252322.30668.18276041739086338328.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860251784.30668.17339867835129075077.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU supports ARI on downstream ports and assigned devices may support
ARI in their extended capabilities. The endpoint ARI capability
specifies the next function, such that the OS doesn't need to walk
each possible function, however this next function is relative to the
host, not the guest. This leads to device discovery issues when we
combine separate functions into virtual multi-function packages in a
guest. For example, SR-IOV VFs are not enumerated by simply probing
the function address space, therefore the ARI next-function field is
zero. When we combine multiple VFs together as a multi-function
device in the guest, the guest OS identifies ARI is enabled, relies on
this next-function field, and stops looking for additional function
after the first is found.
Long term we should expose the ARI capability to the guest to enable
configurations with more than 8 functions per slot, but this requires
additional QEMU PCI infrastructure to manage the next-function field
for multiple, otherwise independent devices. In the short term,
hiding this capability allows equivalent functionality to what we
currently have on non-express chipsets.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
We want the travis build bot to post notifications on IRC only for the
master qemu repository and not the various forks/branches of
others. Currently there is no direct option to restrict the updates to
one repository. This is being worked upon by the developers and
tracked in https://github.com/travis-ci/travis-ci/issues/1094.
Until such time, we can use the workaround as posted in
ref. https://github.com/facebook/flow/pull/1822.
This basically creates an ecrypted string which decrypts to qemu IRC
channel only on "qemu/qemu" repo and not on the forks. This enables
the build bot to notify the IRC only for the main repo.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This file is actually the header for async.c and aio-*.c., so add it to
the same section.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1468826387-10473-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
No need duplicate the judgment, there is one in function entry.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468814749-14510-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Renames look like this with git-diff(1) when diff.renames = true is set:
diff --git a/a b/b
similarity index 100%
rename from a
rename to b
This raises the "Does not appear to be a unified-diff format patch"
error because checkpatch.pl only considers a diff valid if it contains
at least one "@@" hunk.
This patch accepts renames and copies too so that checkpatch.pl exits
successfully when a diff only renames/copies files. The git diff
extended header format is described on the git-diff(1) man page.
Reported-by: Colin Lord <clord@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468576014-28788-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Parameter **errp of aio_context_setup() is useless, remove it
and clean up the related code.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468578524-23433-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Invoking io_setup(MAX_EVENTS) we ask kernel to create ring buffer for us
with specified number of events. But kernel ring buffer allocation logic
is a bit tricky (ring buffer is page size aligned + some percpu allocation
are required) so eventually more than requested events number is allocated.
From a userspace side we have to follow the convention and should not try
to io_submit() more or logic, which consumes completed events, should be
changed accordingly. The pitfall is in the following sequence:
MAX_EVENTS = 128
io_setup(MAX_EVENTS)
io_submit(MAX_EVENTS)
io_submit(MAX_EVENTS)
/* now 256 events are in-flight */
io_getevents(MAX_EVENTS) = 128
/* we can handle only 128 events at once, to be sure
* that nothing is pended the io_getevents(MAX_EVENTS)
* call must be invoked once more or hang will happen. */
To prevent the hang or reiteration of io_getevents() call this patch
restricts the number of in-flights, which is now limited to MAX_EVENTS.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468415004-31755-1-git-send-email-roman.penyaev@profitbricks.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This has better performance because it executes fewer system calls
and does not use a bottom half per disk.
Originally proposed by Ming Lei.
[Changed #include "raw-aio.h" to "block/raw-aio.h" in win32-aio.c to fix
build error as reported by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1467650000-51385-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
squash! linux-aio: share one LinuxAioState within an AioContext
We have only one flag for now - Empty Image flag. The patch fixes unused
bits specification and marks bit 1 as usused.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Here's what ought to be the final ppc pull request before the 2.7 hard
freeze. This set contains a rework of the DBDMA device for Mac
platforms, and some assorted cleanups and bugfixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=K5vl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160718' into staging
ppc patch queue 2016-07-18
Here's what ought to be the final ppc pull request before the 2.7 hard
freeze. This set contains a rework of the DBDMA device for Mac
platforms, and some assorted cleanups and bugfixes.
# gpg: Signature made Mon 18 Jul 2016 05:35:27 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160718:
ppc: Yet another fix for the huge page support detection mechanism
target-ppc: fix left shift overflow in hpte_page_shift
ppc/mmu-hash64: Remove duplicated #include statement
ppc: abort if compat property contains an unknown value
spapr: Ensure CPU cores are added contiguously and removed in LIFO order
vfio/spapr: Remove stale ioctl() call
ppc: Fix support for odd MSR combinations
dbdma: reset io->processing flag for unassigned DBDMA channel rw accesses
dbdma: set FLUSH bit upon reception of flush command for unassigned DBDMA channels
dbdma: fix load_word/store_word value endianness
dbdma: fix endian of DBDMA_CMDPTR_LO during branch
dbdma: add per-channel debugging enabled via DEBUG_DBDMA_CHANMASK
dbdma: always define DBDMA_DPRINTF and enable debug with DEBUG_DBDMA
spapr: fix core unplug crash
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
e1000e needs net_tx_pkt.o and net_rx_pkt.o too.
Cc: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Cc: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
