Note the vmc_register_interface() in spice_chr_write is left in place
in case someone uses spice-chardev with a frontend which does not have
guest open / close notification.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Some frontends know when the guest has opened the "channel" and is actively
listening to it, for example virtio-serial. This patch adds 2 new qemu-chardev
functions which can be used by frontends to signal guest open / close, and
allows interested backends to listen to this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Make sure the base register isn't updated if it is in the load list
for a Thumb LDM (T1 encoding) which aborts partway through the load.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-arm: fix LDMIA bug on page boundary
When consecutive memory locations are on page boundary, a base register may be
loaded before page fault occurs. After page fault handling, it losts the memory
location information. To solve this problem, loading a base register has to put back.
Signed-off-by: Yuyeon Oh <yuyeon.oh@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
So far we set IRR for edge IRQs even if the pin is masked. If the guest
later on unmasks and switches the pin to level-triggered mode, irr will
remain set, causing an IRQ storm. The point is that setting IRR is not
correct in this case according to the spec, and avoiding this resolves
the issue.
Reported-and-tested-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 5145b3d1cc revealed a bug in the lazy ROMD switch-back logic, but
resolved it by breaking that feature. This approach addresses the issue
by switching back to ROMD after a certain amount of read accesses
without further unlock sequences.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
cppcheck reports this error:
commpage.c:223: error: Possible null pointer dereference:
value - otherwise it is redundant to check if value is null at line 214
The null pointer check in line 214 is indeed not needed.
If value were null, the code would crash in line 223.
See do_compare_and_swap64 were for a reference.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'for-anthony' of git://repo.or.cz/qemu/kevin:
Remove obsolete 'enabled' variable from progress state
Add dd-style SIGUSR1 progress reporting
qed: Fix consistency check on 32-bit hosts
ide/atapi: Introduce CHECK_READY flag for commands
ide/atapi: Replace bdrv_get_geometry calls by s->nb_sectors
ide/atapi: Use table instead of switch for commands
ide/atapi: Factor commands out
ide: Split atapi.c out
Improve accuracy of block migration bandwidth calculation
atapi: Add 'medium ready' to 'medium not ready' transition on cd change
qemu-img: allow rebase to a NULL backing file when unsafe
Compilation for Windows needs a different declaration for the
printf format attribute, so use the macro which was defined for
this purpose.
Cc: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This introduces support for dd-style progress reporting on POSIX
systems, if the user hasn't specified -p to report progress. If sent a
SIGUSR1, qemu-img will report current progress for commands that
support progress reporting.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qed_bytes_to_clusters() function is normally used with size_t
lengths. Consistency check used it with file size length and therefore
failed on 32-bit hosts when the image file is 4 GB or more.
Make qed_bytes_to_clusters() explicitly 64-bit and update consistency
check to keep 64-bit cluster counts.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some commands are supposed to report a Not Ready Condition (i.e. they require
a medium to be present in order to execute successfully). Instead of
duplicating the check in each command implementation, let's add a flag and
check it before calling the command.
This patch only converts existing checks, it does not introduce new checks for
any of the other commands that can/should report a Not Ready Condition.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The disk size can only change when the medium is changed, and the change
callback takes care of updating s->nb_sectors in this case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation for a table of function pointers, factor each command out from
ide_atapi_cmd() into its own function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Besides moving code, this patch only fixes some whitespace issues in the moved
code and makes all functions in atapi.c static which can be static.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block_mig_state.total_time is currently the sum of the read request
latencies. This is not very accurate because block migration uses aio and
so several requests can be submitted at once. Bandwidth should be computed
with wall-clock time, not by adding the latencies. In this case,
"total_time" has a higher value than it should, and so the computed
bandwidth is lower than it is in reality. This means that migration can
take longer than it needs to.
However, we don't want to use pure wall-clock time here. We are computing
bandwidth in the asynchronous phase, where the migration repeatedly wakes
up and sends some aio requests. The computed bandwidth will be used for
synchronous transfer.
Signed-off-by: Avishay Traeger <avishay@il.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
MMC-5 Table F.1 lists errors that can be thrown for the TEST_UNIT_READY
command. Going from medium not ready to medium ready states is
communicated by throwing an error.
This adds the missing 'tray opened' event that we fail to report to
guests. After doing this, older Linux guests properly revalidate a disc
on the change command. HSM violation errors, which caused Linux guests
to do a soft-reset of the link, also go away:
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
sr 1:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 01/60:00:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU can drop a backing file so that an image file no longer depends on
the backing file, but this feature has not been exposed in qemu-img.
This is useful in an image streaming usecase or when an image file has
been fully allocated and no reads can hit the backing file anymore.
Since the dropping the backing file can make the image unusable, only
allow this when the unsafe flag has been set.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because the opengl library is only linked to for the lm32 target, we can
now safely enable opengl by default again.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch is the first attempt to make configure more intelligent with
regard to how it links to libraries. It divides the softmmu libraries into
two lists, a general one and a list which depends on the target
architecture.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Work around a SPARC glibc bug which caused the epoll_create1 configure
test to wrongly claim that the function was present. Some versions of
SPARC glibc provided the function in the library but didn't declare
it in the include file; the result is that gcc warns about an implicit
declaration but a link succeeds. So we reference the function as a
value rather than a function call to induce a compile time error
if the declaration was not present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Trace events cannot use %s in their format strings because trace
backends vary in how they can deference pointers (if at all). Recording
const char * values is not meaningful if their contents are not recorded
too.
Change grlib trace events that rely on strings so that they communicate
similar information without using strings.
A follow-up patch explains this limitation and updates docs/tracing.txt.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Be greedy in matching the trailing "\)*" pattern. Otherwise, all the
text in the trace string up to the last closed parenthesis is taken as
part of the prototype.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Quite a number of uid/gid related syscalls are only defined on systems
with USE_UID16 defined. This is apperently based on the idea that these
system calls would never be called on non-UID16 systems. Make these
syscalls available for all architectures that define them.
drop alpha hack to support selected UID16 syscalls. MIPS and PowerPC
were also defined as UID16, to get uid/gid syscalls available, drop
this error as well.
Change QEMU to reflect this.
Cc: Ulrich Hecht <uli@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
We keep a list of host architectures that do llseek with the same
syscall as lseek. S390x is one of them, so let's add it to the list.
Original-patch-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
The result needs to be converted as it is stored in an array of struct
ifreq and sizeof(struct ifreq) differs according to target and host
alignment rules.
This patch allows to execute correctly the following program on arm
and m68k:
#include <stdio.h>
#include <sys/ioctl.h>
#include <net/if.h>
#include <alloca.h>
#include <string.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
int main(void)
{
int s, ret;
struct ifconf ifc;
int i;
memset( &ifc, 0, sizeof( struct ifconf ) );
ifc.ifc_len = 8 * sizeof(struct ifreq);
ifc.ifc_buf = alloca(ifc.ifc_len);
s = socket( AF_INET, SOCK_DGRAM, 0 );
if (s < 0) {
perror("Cannot open socket");
return 1;
}
ret = ioctl( s, SIOCGIFCONF, &ifc );
if (s < 0) {
perror("ioctl() failed");
return 1;
}
for (i = 0; i < ifc.ifc_len / sizeof(struct ifreq) ; i ++) {
struct sockaddr_in *s;
s = (struct sockaddr_in*)&ifc.ifc_req[i].ifr_addr;
printf("%s\n", ifc.ifc_req[i].ifr_name);
printf("%s\n", inet_ntoa(s->sin_addr));
}
}
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
PTHREAD_STACK_MIN (16KB) is somewhat inadequate for a new stack for new
QEMU threads. Set new limit to 256K which should be enough, yet doesn't
increase memory pressure significantly.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
gcc can check the format string for correctness even when debugging output is
not enabled.
Have to make sure arguments are always available. They are optimized out if
unneeded.
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Removes double (( )) to make DEBUG_PRINT compatible with real function calls.
Change the name to DPRINTF to be consistent with other DPRINTF macros
throughout qemu.
Include the "RTL8139: " prefix in the macro. This changes some debug output
slightly since the prefix wasn't present on all lines.
Part of the change was done using the "coccinelle" tool with the following
small semantic match:
@@ expression E; @@
- DEBUG_PRINT((E))
+ DPRINTF(E)
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Prevents a compilation failure when DEBUG_RTL8139 is defined:
CC libhw32/rtl8139.o
cc1: warnings being treated as errors
hw/rtl8139.c: In function ‘rtl8139_cplus_transmit_one’:
hw/rtl8139.c:1960: error: format ‘%8lx’ expects type ‘long unsigned int’, but argument 5 has type ‘target_phys_addr_t’
make[1]: *** [rtl8139.o] Error 1
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The REG_PC constant used in the ARM nwfpe code is fine in the kernel
but when used in qemu can clash with a definition in the host system
include files (in particular on Ubuntu Lucid SPARC, including signal.h
will define a REG_PC). Rename the constant to avoid this issue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly UNDEF for Neon VLD/VST "multiple structures" forms where the
align field is not valid.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Handle the UNDEF and UNPREDICTABLE cases for Neon "single element to
one lane" VLD and "single element from one lane" VST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This increase the correctness (precision, NaN values, corner cases) on
non-x86 machines, and add the possibility to handle the exception
correctly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
