A crash found while fuzzing device virtio-net-socket-check-used.
Assertion "offset == 0" in iov_copy() fails if less than guest_hdr_len bytes
were transmited.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Message-Id: <20240613143529.602591-2-frolov@swemel.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VHOST_USER_SET_LOG_BASE requests should be categorized into
non-vring specific messages, and should be sent only once.
If send more than once, dpdk will munmap old log_addr which may has been used and cause segmentation fault.
Signed-off-by: BillXiang <xiangwencheng@dayudpu.com>
Message-Id: <20240613065150.3100-1-xiangwencheng@dayudpu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fixes LeakSanitizer warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-san-v2-7-750bb0946dbd@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the Q35 supports up to 4096 vCPUs (since v9.0), but for TCG
cases, if x2APIC is not actively enabled to boot more than 255 vCPUs (
e.g., qemu-system-i386 -M pc-q35-9.0 -smp 666), the following error is
reported:
Unexpected error in apic_common_set_id() at ../hw/intc/apic_common.c:449:
qemu-system-i386: APIC ID 255 requires x2APIC feature in CPU
Aborted (core dumped)
This error can be resolved by setting x2apic=on in -cpu. In order to
better help users deal with this scenario, add the error hint to
instruct users on how to enable the x2apic feature. Then, the error
report becomes the following:
Unexpected error in apic_common_set_id() at ../hw/intc/apic_common.c:448:
qemu-system-i386: APIC ID 255 requires x2APIC feature in CPU
Try x2apic=on in -cpu.
Aborted (core dumped)
Note since @errp is &error_abort, error_append_hint() can't be applied
on @errp. And in order to separate the exact error message from the
(perhaps effectively) hint, adding a hint via error_append_hint() is
also necessary. Therefore, introduce @local_error in
apic_common_set_id() to handle both the error message and the error
hint.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240606140858.2157106-1-zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In current code, when guest does S3, virtio-gpu are reset due to the
bit No_Soft_Reset is not set. After resetting, the display resources
of virtio-gpu are destroyed, then the display can't come back and only
show blank after resuming.
Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check
this bit, if this bit is set, the devices resetting will not be done, and
then the display can work after resuming.
No_Soft_Reset bit is implemented for all virtio devices, and was tested
only on virtio-gpu device. Set it false by default for safety.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Message-Id: <20240606102205.114671-3-Jiqian.Chen@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter and coverity report:
We've passed '&data' to address_space_write(), which means "read
from the address on the stack where the function argument 'data'
lives", so instead of writing 64 bytes of data to the guest ,
we'll write 64 bytes which start with a host pointer value and
then continue with whatever happens to be on the host stack
after that.
Indeed the intention was to write 64 bytes of data at the address given.
Fix the parameter to address_space_write().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/all/CAFEAcA-u4sytGwTKsb__Y+_+0O2-WwARntm3x8WNhvL1WfHOBg@mail.gmail.com/
Fixes: 6bda41a69b ("hw/cxl: Add clear poison mailbox command support.")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Message-Id: <20240531-fix-poison-set-cacheline-v1-1-e3bc7e8f1158@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In function kvm_virtio_pci_vector_use_one(), the function will only use
the irqfd/vector for itself. Therefore, in the undo label, the failing
process is incorrect.
To fix this, we can just remove this label.
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240528084840.194538-1-lulu@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shutdown requests are normally hardware dependent.
By extending pvpanic to also handle shutdown requests, guests can
submit such requests with an easily implementable and cross-platform
mechanism.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-5-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The different components of pvpanic duplicate the list of supported
events. Move it to the shared header file to minimize changes when new
events are added.
MST: tweak: keep header included in pvpanic.c to avoid header
dependency, rebase.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-3-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Before the change, the QMP interface used for add/release DC extents
only allows to release an extent whose DPA range is contained by a single
accepted extent in the device.
With the change, we relax the constraints. As long as the DPA range of
the extent is covered by accepted extents, we allow the release.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-15-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the change, we extend the extent release mailbox command processing
to allow more flexible release. As long as the DPA range of the extent to
release is covered by accepted extent(s) in the device, the release can be
performed.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-14-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All DPA ranges in the DC regions are invalid to access until an extent
covering the range has been successfully accepted by the host. A bitmap
is added to each region to record whether a DC block in the region has
been backed by a DC extent. Each bit in the bitmap represents a DC block.
When a DC extent is accepted, all the bits representing the blocks in the
extent are set, which will be cleared when the extent is released.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-13-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To simulate FM functionalities for initiating Dynamic Capacity Add
(Opcode 5604h) and Dynamic Capacity Release (Opcode 5605h) as in CXL spec
r3.1 7.6.7.6.5 and 7.6.7.6.6, we implemented two QMP interfaces to issue
add/release dynamic capacity extents requests.
With the change, we allow to release an extent only when its DPA range
is contained by a single accepted extent in the device. That is to say,
extent superset release is not supported yet.
1. Add dynamic capacity extents:
For example, the command to add two continuous extents (each 128MiB long)
to region 0 (starting at DPA offset 0) looks like below:
{ "execute": "qmp_capabilities" }
{ "execute": "cxl-add-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"selection-policy": "prescriptive",
"region": 0,
"extents": [
{
"offset": 0,
"len": 134217728
},
{
"offset": 134217728,
"len": 134217728
}
]
}
}
2. Release dynamic capacity extents:
For example, the command to release an extent of size 128MiB from region 0
(DPA offset 128MiB) looks like below:
{ "execute": "cxl-release-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"removal-policy":"prescriptive",
"region": 0,
"extents": [
{
"offset": 134217728,
"len": 134217728
}
]
}
}
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-12-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL spec 3.1, two mailbox commands are implemented:
Add Dynamic Capacity Response (Opcode 4802h) 8.2.9.9.9.3, and
Release Dynamic Capacity (Opcode 4803h) 8.2.9.9.9.4.
For the process of the above two commands, we use two-pass approach.
Pass 1: Check whether the input payload is valid or not; if not, skip
Pass 2 and return mailbox process error.
Pass 2: Do the real work--add or release extents, respectively.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-11-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add dynamic capacity extent list representative to the definition of
CXLType3Dev and implement get DC extent list mailbox command per
CXL.spec.3.1:.8.2.9.9.9.2.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-10-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add (file/memory backed) host backend for DCD. All the dynamic capacity
regions will share a single, large enough host backend. Set up address
space for DC regions to support read/write operations to dynamic capacity
for DCD.
With the change, the following support is added:
1. Add a new property to type3 device "volatile-dc-memdev" to point to host
memory backend for dynamic capacity. Currently, all DC regions share one
host backend;
2. Add namespace for dynamic capacity for read/write support;
3. Create cdat entries for each dynamic capacity region.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-9-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function ct3_build_cdat_entries_for_mr only uses size of the passed
memory region argument, refactor the function definition to make the passed
arguments more specific.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-8-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the change, when setting up memory for type3 memory device, we can
create DC regions.
A property 'num-dc-regions' is added to ct3_props to allow users to pass the
number of DC regions to create. To make it easier, other region parameters
like region base, length, and block size are hard coded. If needed,
these parameters can be added easily.
With the change, we can create DC regions with proper kernel side
support like below:
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_dc_region)
echo $region > /sys/bus/cxl/devices/decoder0.0/create_dc_region
echo 256 > /sys/bus/cxl/devices/$region/interleave_granularity
echo 1 > /sys/bus/cxl/devices/$region/interleave_ways
echo "dc0" >/sys/bus/cxl/devices/decoder2.0/mode
echo 0x40000000 >/sys/bus/cxl/devices/decoder2.0/dpa_size
echo 0x40000000 > /sys/bus/cxl/devices/$region/size
echo "decoder2.0" > /sys/bus/cxl/devices/$region/target0
echo 1 > /sys/bus/cxl/devices/$region/commit
echo $region > /sys/bus/cxl/drivers/cxl_region/bind
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-7-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Rename mem_size as static_mem_size for type3 memdev to cover static RAM and
pmem capacity, preparing for the introduction of dynamic capacity to support
dynamic capacity devices.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-6-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per cxl spec r3.1, add dynamic capacity (DC) region representative based on
Table 8-165 and extend the cxl type3 device definition to include DC region
information. Also, based on info in 8.2.9.9.9.1, add 'Get Dynamic Capacity
Configuration' mailbox support.
Note: we store region decode length as byte-wise length on the device, which
should be divided by 256 * MiB before being returned to the host
for "Get Dynamic Capacity Configuration" mailbox command per
specification.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-5-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Based on CXL spec r3.1 Table 8-127 (Identify Memory Device Output
Payload), dynamic capacity event log size should be part of
output of the Identify command.
Add dc_event_log_size to the output payload for the host to get the info.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-4-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This enables wrapper devices to customize the base device's CCI
(for example, with custom commands outside the specification)
without the need to change the base device.
The also enabled the base device to dispatch those commands without
requiring additional driver support.
Heavily edited by Jonathan Cameron to increase code reuse
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-3-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows devices to have fully customized CCIs, along with complex
devices where wrapper devices can override or add additional CCI
commands without having to replicate full command structures or
pollute a base device with every command that might ever be used.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-2-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the vhost-user is reconnecting to the backend, and if the vhost-user fails
at the get_features in vhost_dev_init(), then the reconnect will fail
and it will not be retriggered forever.
The reason is:
When the vhost-user fail at get_features, the vhost_dev_cleanup will be called
immediately.
vhost_dev_cleanup calls 'memset(hdev, 0, sizeof(struct vhost_dev))'.
The reconnect path is:
vhost_user_blk_event
vhost_user_async_close(.. vhost_user_blk_disconnect ..)
qemu_chr_fe_set_handlers <----- clear the notifier callback
schedule vhost_user_async_close_bh
The vhost->vdev is null, so the vhost_user_blk_disconnect will not be
called, then the event fd callback will not be reinstalled.
We need to ensure that even if vhost_dev_init initialization fails, the event
handler still needs to be reinstalled when s->connected is false.
All vhost-user devices have this issue, including vhost-user-blk/scsi.
Fixes: 71e076a07d ("hw/virtio: generalise CHR_EVENT_CLOSED handling")
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20240516025753.130171-3-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit f02a4b8e64.
Since the current patch cannot completely fix the lost reconnect
problem, there is a scenario that is not considered:
- When the virtio-blk driver is removed from the guest os,
s->connected has no chance to be set to false, resulting in
subsequent reconnection not being executed.
The next patch will completely fix this issue with a better approach.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20240516025753.130171-2-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When using vhost-user-gpu with GL, qemu -display gtk doesn't show output
and prints: qemu: eglCreateImageKHR failed
Since commit 9ac06df8b ("virtio-gpu-udmabuf: correct naming of
QemuDmaBuf size properties"), egl_dmabuf_import_texture() uses
backing_{width,height} for the texture dimension.
Fixes: 9ac06df8b ("virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240515105237.1074116-1-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix bug imported by 27ce0f3afc ("fix Power Management Control Register for PCI Express virtio devices"
After this change, observe that QEMU may erroneously clear the power status of the device,
or may erroneously clear non writable registers, such as NO_SOFT_RESET, etc.
Only state of PM_CTRL is writable.
Only when flag VIRTIO_PCI_FLAG_INIT_PM is set, need to reset state.
Fixes: 27ce0f3afc ("fix Power Management Control Register for PCI Express virtio devices"
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Message-Id: <20240515073526.17297-2-Jiqian.Chen@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-1.3 specification
<https://docs.oasis-open.org/virtio/virtio/v1.3/virtio-v1.3.html> writes:
2.8.6 Next Flag: Descriptor Chaining
Buffer ID is included in the last descriptor in the list.
If the feature (_F_INDIRECT_DESC) has been negotiated, install only
one descriptor in the virtqueue.
Therefor the buffer id should be obtained from the first descriptor.
In descriptor chaining scenarios, the buffer id should be obtained
from the last descriptor.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Signed-off-by: Wafer <wafer@jaguarmicro.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240510072753.26158-2-wafer@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not having VIRTIO_F_RING_PACKED in feature_bits[] is a problem when the
vhost-vsock device does not offer the feature bit VIRTIO_F_RING_PACKED
but the in QEMU device is configured to try to use the packed layout
(the virtio property "packed" is on).
As of today, the Linux kernel vhost-vsock device does not support the
packed queue layout (as vhost does not support packed), and does not
offer VIRTIO_F_RING_PACKED. Thus when for example a vhost-vsock-ccw is
used with packed=on, VIRTIO_F_RING_PACKED ends up being negotiated,
despite the fact that the device does not actually support it, and
one gets to keep the pieces.
Fixes: 74b3e46630 ("virtio: add property to enable packed virtqueue")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20240429113334.2454197-1-pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for the VIRTIO_F_NOTIFICATION_DATA feature across a variety
of vhost devices.
The inclusion of VIRTIO_F_NOTIFICATION_DATA in the feature bits arrays
for these devices ensures that the backend is capable of offering and
providing support for this feature, and that it can be disabled if the
backend does not support it.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-6-jonah.palmer@oracle.com>
Acked-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to virtio-ccw devices for handling the extra data sent from
the driver to the device when the VIRTIO_F_NOTIFICATION_DATA transport
feature has been negotiated.
The extra data that's passed to the virtio-ccw device when this feature
is enabled varies depending on the device's virtqueue layout.
That data passed to the virtio-ccw device is in the same format as the
data passed to virtio-pci devices.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-5-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to virtio-mmio devices for handling the extra data sent from
the driver to the device when the VIRTIO_F_NOTIFICATION_DATA transport
feature has been negotiated.
The extra data that's passed to the virtio-mmio device when this feature
is enabled varies depending on the device's virtqueue layout.
The data passed to the virtio-mmio device is in the same format as the
data passed to virtio-pci devices.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prevent the realization of a virtio device that attempts to use the
VIRTIO_F_NOTIFICATION_DATA transport feature without disabling
ioeventfd.
Due to ioeventfd not being able to carry the extra data associated with
this feature, having both enabled is a functional mismatch and therefore
Qemu should not continue the device's realization process.
Although the device does not yet know if the feature will be
successfully negotiated, many devices using this feature wont actually
work without this extra data and would fail FEATURES_OK anyway.
If ioeventfd is able to work with the extra notification data in the
future, this compatibility check can be removed.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to virtio-pci devices for handling the extra data sent
from the driver to the device when the VIRTIO_F_NOTIFICATION_DATA
transport feature has been negotiated.
The extra data that's passed to the virtio-pci device when this
feature is enabled varies depending on the device's virtqueue
layout.
In a split virtqueue layout, this data includes:
- upper 16 bits: shadow_avail_idx
- lower 16 bits: virtqueue index
In a packed virtqueue layout, this data includes:
- upper 16 bits: 1-bit wrap counter & 15-bit shadow_avail_idx
- lower 16 bits: virtqueue index
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-2-jonah.palmer@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On setups with one or more virtio-net devices with vhost on,
dirty tracking iteration increases cost the bigger the number
amount of queues are set up e.g. on idle guests migration the
following is observed with virtio-net with vhost=on:
48 queues -> 78.11% [.] vhost_dev_sync_region.isra.13
8 queues -> 40.50% [.] vhost_dev_sync_region.isra.13
1 queue -> 6.89% [.] vhost_dev_sync_region.isra.13
2 devices, 1 queue -> 18.60% [.] vhost_dev_sync_region.isra.14
With high memory rates the symptom is lack of convergence as soon
as it has a vhost device with a sufficiently high number of queues,
the sufficient number of vhost devices.
On every migration iteration (every 100msecs) it will redundantly
query the *shared log* the number of queues configured with vhost
that exist in the guest. For the virtqueue data, this is necessary,
but not for the memory sections which are the same. So essentially
we end up scanning the dirty log too often.
To fix that, select a vhost device responsible for scanning the
log with regards to memory sections dirty tracking. It is selected
when we enable the logger (during migration) and cleared when we
disable the logger. If the vhost logger device goes away for some
reason, the logger will be re-selected from the rest of vhost
devices.
After making mem-section logger a singleton instance, constant cost
of 7%-9% (like the 1 queue report) will be seen, no matter how many
queues or how many vhost devices are configured:
48 queues -> 8.71% [.] vhost_dev_sync_region.isra.13
2 devices, 8 queues -> 7.97% [.] vhost_dev_sync_region.isra.14
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-2-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
There could be a mix of both vhost-user and vhost-kernel clients
in the same QEMU process, where separate vhost loggers for the
specific vhost type have to be used. Make the vhost logger per
backend type, and have them properly reference counted.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-1-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A malicious or buggy guest may generated buffered ioreqs faster than
QEMU can process them in handle_buffered_iopage(). The result is a
livelock - QEMU continuously processes ioreqs on the main thread without
iterating through the main loop which prevents handling other events,
processing timers, etc. Without QEMU handling other events, it often
results in the guest becoming unsable and makes it difficult to stop the
source of buffered ioreqs.
To avoid this, if we process a full page of buffered ioreqs, stop and
reschedule an immediate timer to continue processing them. This lets
QEMU go back to the main loop and catch up.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240404140833.1557953-1-ross.lagerwall@citrix.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
When running in a stubdomain, the config space access via sysfs needs to
use BDF as seen inside stubdomain (connected via xen-pcifront), which is
different from the real BDF. For other purposes (hypercall parameters
etc), the real BDF needs to be used.
Get the in-stubdomain BDF by looking up relevant PV PCI xenstore
entries.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <35049e99da634a74578a1ff2cb3ae4cc436ede33.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
Introduce global xen_is_stubdomain variable when qemu is running inside
a stubdomain instead of dom0. This will be relevant for subsequent
patches, as few things like accessing PCI config space need to be done
differently.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <e66aa97dca5120f22e015c19710b2ff04f525720.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
We should call inflateEnd() like on success path to cleanup state in s
variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This struct has been unused since
Commit f932093ae1 ("hw/arm/bcm2836: Split out common part of BCM283X
classes")
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since a4c2735f35 (cpu: move Qemu[Thread|Cond] setup into common code,
2024-05-30) these fields are now allocated at cpu_common_initfn(). So
let's make sure we also free them at cpu_common_finalize().
Furthermore, the code also frees these on round robin, but we missed
'halt_cond'.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch fixes two points reported in coverity scan report [1]. Check
the MMIO access address with (addr + size), not just with the start offset
addr to make sure that the requested memory access not to exceed the
actual register region. We also updated (uint8_t *) to (uint32_t *) to
represent we are accessing the MMIO registers by dword-sized only.
[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/
Cc: Jeuk Kim <jeuk20.kim@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240623024555.78697-1-minwoo.im.dev@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
is used. So, make the virt board's default block device type be
IF_VIRTIO similar to other architectures.
We also need to set no_cdrom to avoid getting a default cdrom device.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,imsics [1] requires a 'msi-cell' property. Add one
and set it zero.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240531202759.911601-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,imsics [1] predicts a 'qemu,imsics' enum in the
'compatible' property.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Linux DT docs for imsic [1] predicts an 'interrupt-controller@addr'
node, not 'imsic@addr', given this node inherits the
'interrupt-controller' node.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,aplic [1] predicts a 'riscv,delegation' property.
Not 'riscv,delegate'.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
