If we're using PSCI emulation to start secondary CPUs, there is no
point in writing the "secondary boot" stub code, because it will
never be used -- secondary CPUs start powered-off, and when powered
on are set to begin execution at the address specified by the guest's
power-on PSCI call, not at the stub.
Move the call to the hook that writes the secondary boot stub code so
that we can do it only if we're starting a Linux kernel and not using
PSCI.
(None of the users of the hook care about the ordering of its call
relative to anything else: they only use it to write a rom blob to
guest memory.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-14-peter.maydell@linaro.org
Now that we have dealt with the one special case (highbank) that needed
to set both psci_conduit and secure_board_setup, we don't need to
allow that combination any more. It doesn't make sense in general,
so use an assertion to ensure we don't add new boards that do it
by accident without thinking through the consequences.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-13-peter.maydell@linaro.org
Guest code on highbank may make non-PSCI SMC calls in order to
enable/disable the L2x0 cache controller (see the Linux kernel's
arch/arm/mach-highbank/highbank.c highbank_l2c310_write_sec()
function). The ABI for this is documented in kernel commit
8e56130dcb as being borrowed from the OMAP44xx ROM. The OMAP44xx TRM
documents this function ID as having no return value and potentially
trashing all guest registers except SP and PC. For QEMU's purposes
(where our L2x0 model is a stub and enabling or disabling it doesn't
affect the guest behaviour) a simple "do nothing" SMC is fine.
We currently implement this NOP behaviour using a little bit of
Secure code we run before jumping to the guest kernel, which is
written by arm_write_secure_board_setup_dummy_smc(). The code sets
up a set of Secure vectors where the SMC entry point returns without
doing anything.
Now that the PSCI SMC emulation handles all SMC calls (setting r0 to
an error code if the input r0 function identifier is not recognized),
we can use that default behaviour as sufficient for the highbank
cache controller call. (Because the guest code assumes r0 has no
interesting value on exit it doesn't matter that we set it to the
error code). We can therefore delete the highbank board code that
sets secure_board_setup to true and writes the secure-code bootstub.
(Note that because the OMAP44xx ABI puts function-identifiers in
r12 and PSCI uses r0, we only avoid a clash because Linux's code
happens to put the function-identifier in both registers. But this
is true also when the kernel is running on real firmware that
implements both ABIs as far as I can see.)
This change fixes in passing booting on the 'midway' board model,
which has been completely broken since we added support for Hyp
mode to the Cortex-A15 CPU. When we did that boot.c was made to
start running the guest code in Hyp mode; this includes the
board_setup hook, which instantly UNDEFs because the NSACR is
not accessible from Hyp. (Put another way, we never made the
secure_board_setup hook support cope with Hyp mode.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-12-peter.maydell@linaro.org
The SMCCC 1.3 spec section 5.2 says
The Unknown SMC Function Identifier is a sign-extended value of (-1)
that is returned in the R0, W0 or X0 registers. An implementation must
return this error code when it receives:
* An SMC or HVC call with an unknown Function Identifier
* An SMC or HVC call for a removed Function Identifier
* An SMC64/HVC64 call from AArch32 state
To comply with these statements, let's always return -1 when we encounter
an unknown HVC or SMC call.
[PMM:
This is a reinstatement of commit 9fcd15b919, previously
reverted in commit 4825eaae4fdd56fba0f; we can do this now that we
have arranged for all the affected board models to not enable the
PSCI emulation if they are running guest code at EL3. This avoids
the regressions that caused us to revert the change for 7.0.]
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the highbank/midway boards to use the new boot.c functionality
to allow us to enable psci-conduit only if the guest is being booted
in EL1 or EL2, so that if the user runs guest EL3 firmware code our
PSCI emulation doesn't get in its way.
To do this we stop setting the psci-conduit and start-powered-off
properties on the CPU objects in the board code, and instead set the
psci_conduit field in the arm_boot_info struct to tell the common
boot loader code that we'd like PSCI if the guest is starting at an
EL that it makes sense with (in which case it will set these
properties).
This means that when running guest code at EL3, all the cores
will start execution at once on poweron. This matches the
real hardware behaviour. (A brief description of the hardware
boot process is in the u-boot documentation for these boards:
https://u-boot.readthedocs.io/en/latest/board/highbank/highbank.html#boot-process
-- in theory one might run the 'a9boot'/'a15boot' secure monitor
code in QEMU, though we probably don't emulate enough for that.)
This affects the highbank and midway boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-10-peter.maydell@linaro.org
Instead of setting the CPU psci-conduit and start-powered-off
properties in the virt board code, set the arm_boot_info psci_conduit
field so that the boot.c code can do it.
This will fix a corner case where we were incorrectly enabling PSCI
emulation when booting guest code into EL3 because it was an ELF file
passed to -kernel or to the generic loader. (EL3 guest code started
via -bios or -pflash was already being run with PSCI emulation
disabled.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-9-peter.maydell@linaro.org
Instead of setting the CPU psci-conduit and start-powered-off
properties in the xlnx-versal-virt board code, set the arm_boot_info
psci_conduit field so that the boot.c code can do it.
This will fix a corner case where we were incorrectly enabling PSCI
emulation when booting guest code into EL3 because it was an ELF file
passed to -kernel. (EL3 guest code started via -bios, -pflash, or
the generic loader was already being run with PSCI emulation
disabled.)
Note that EL3 guest code has no way to turn on the secondary CPUs
because there's no emulated power controller, but this was already
true for EL3 guest code run via -bios, -pflash, or the generic
loader.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-8-peter.maydell@linaro.org
Change the Xilinx ZynqMP-based board xlnx-zcu102 to use the new
boot.c functionality to allow us to enable psci-conduit only if
the guest is being booted in EL1 or EL2, so that if the user runs
guest EL3 firmware code our PSCI emulation doesn't get in its
way.
To do this we stop setting the psci-conduit property on the CPU
objects in the SoC code, and instead set the psci_conduit field in
the arm_boot_info struct to tell the common boot loader code that
we'd like PSCI if the guest is starting at an EL that it makes
sense with.
Note that this means that EL3 guest code will have no way
to power on secondary cores, because we don't model any
kind of power controller that does that on this SoC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220127154639.2090164-7-peter.maydell@linaro.org
Change the allwinner-h3 based board to use the new boot.c
functionality to allow us to enable psci-conduit only if the guest is
being booted in EL1 or EL2, so that if the user runs guest EL3
firmware code our PSCI emulation doesn't get in its way.
To do this we stop setting the psci-conduit property on the CPU
objects in the SoC code, and instead set the psci_conduit field in
the arm_boot_info struct to tell the common boot loader code that
we'd like PSCI if the guest is starting at an EL that it makes sense
with.
This affects the orangepi-pc board.
This commit leaves the secondary CPUs in the powered-down state if
the guest is booting at EL3, which is the same behaviour as before
this commit. The secondaries can no longer be started by that EL3
code making a PSCI call but can still be started via the CPU
Configuration Module registers (which we model in
hw/misc/allwinner-cpucfg.c).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-6-peter.maydell@linaro.org
Change the iMX-SoC based boards to use the new boot.c functionality
to allow us to enable psci-conduit only if the guest is being booted
in EL1 or EL2, so that if the user runs guest EL3 firmware code our
PSCI emulation doesn't get in its way.
To do this we stop setting the psci-conduit property on the CPU
objects in the SoC code, and instead set the psci_conduit field in
the arm_boot_info struct to tell the common boot loader code that
we'd like PSCI if the guest is starting at an EL that it makes
sense with.
This affects the mcimx6ul-evk and mcimx7d-sabre boards.
Note that for the mcimx7d board, this means that when running guest
code at EL3 there is currently no way to power on the secondary CPUs,
because we do not currently have a model of the system reset
controller module which should be used to do that for the imx7 SoC,
only for the imx6 SoC. (Previously EL3 code which knew it was
running on QEMU could use a PSCI call to do this.) This doesn't
affect the imx6ul-evk board because it is uniprocessor.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220127154639.2090164-5-peter.maydell@linaro.org
Currently we expect board code to set the psci-conduit property on
CPUs and ensure that secondary CPUs are created with the
start-powered-off property set to false, if the board wishes to use
QEMU's builtin PSCI emulation. This worked OK for the virt board
where we first wanted to use it, because the virt board directly
creates its CPUs and is in a reasonable position to set those
properties. For other boards which model real hardware and use a
separate SoC object, however, it is more awkward. Most PSCI-using
boards just set the psci-conduit board unconditionally.
This was never strictly speaking correct (because you would not be
able to run EL3 guest firmware that itself provided the PSCI
interface, as the QEMU implementation would overrule it), but mostly
worked in practice because for non-PSCI SMC calls QEMU would emulate
the SMC instruction as normal (by trapping to guest EL3). However,
we would like to make our PSCI emulation follow the part of the SMCC
specification that mandates that SMC calls with unknown function
identifiers return a failure code, which means that all SMC calls
will be handled by the PSCI code and the "emulate as normal" path
will no longer be taken.
We tried to implement that in commit 9fcd15b919
("arm: tcg: Adhere to SMCCC 1.3 section 5.2"), but this
regressed attempts to run EL3 guest code on the affected boards:
* mcimx6ul-evk, mcimx7d-sabre, orangepi, xlnx-zcu102
* for the case only of EL3 code loaded via -kernel (and
not via -bios or -pflash), virt and xlnx-versal-virt
so for the 7.0 release we reverted it (in commit 4825eaae4f).
This commit provides a mechanism that boards can use to arrange that
psci-conduit is set if running guest code at a low enough EL but not
if it would be running at the same EL that the conduit implies that
the QEMU PSCI implementation is using. (Later commits will convert
individual board models to use this mechanism.)
We do this by moving the setting of the psci-conduit and
start-powered-off properties to arm_load_kernel(). Boards which want
to potentially use emulated PSCI must set a psci_conduit field in the
arm_boot_info struct to the type of conduit they want to use (SMC or
HVC); arm_load_kernel() will then set the CPUs up accordingly if it
is not going to start the guest code at the same or higher EL as the
fake QEMU firmware would be at.
Board/SoC code which uses this mechanism should no longer set the CPU
psci-conduit property directly. It should only set the
start-powered-off property for secondaries if EL3 guest firmware
running bare metal expects that rather than the alternative "all CPUs
start executing the firmware at once".
Note that when calculating whether we are going to run guest
code at EL3, we ignore the setting of arm_boot_info::secure_board_setup,
which might cause us to run a stub bit of guest code at EL3 which
does some board-specific setup before dropping to EL2 or EL1 to
run the guest kernel. This is OK because only one board that
enables PSCI sets secure_board_setup (the highbank board), and
the stub code it writes will behave the same way whether the
one SMC call it makes is handled by "emulate the SMC" or by
"PSCI default returns an error code". So we can leave that stub
code in place until after we've changed the PSCI default behaviour;
at that point we will remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20220127154639.2090164-4-peter.maydell@linaro.org
The CPU object's start-powered-off property is currently only
settable before the CPU object is realized. For arm machines this is
awkward, because we would like to decide whether the CPU should be
powered-off based on how we are booting the guest code, which is
something done in the machine model code and in common code called by
the machine model, which runs much later and in completely different
parts of the codebase from the SoC object code that is responsible
for creating and realizing the CPU objects.
Allow start-powered-off to be set after realize. Since this isn't
something that's supported by the DEFINE_PROP_* macros, we have to
switch the property definition to use the
object_class_property_add_bool() function.
Note that it doesn't conceptually make sense to change the setting of
the property after the machine has been completely initialized,
beacuse this would mean that the behaviour of the machine when first
started would differ from its behaviour when the system is
subsequently reset. (It would also require the underlying state to
be migrated, which we don't do.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20220127154639.2090164-3-peter.maydell@linaro.org
We want to allow the psci-conduit property to be set after realize,
because the parts of the code which are best placed to decide if it's
OK to enable QEMU's builtin PSCI emulation (the board code and the
arm_load_kernel() function are distant from the code which creates
and realizes CPUs (typically inside an SoC object's init and realize
method) and run afterwards.
Since the DEFINE_PROP_* macros don't have support for creating
properties which can be changed after realize, change the property to
be created with object_property_add_uint32_ptr(), which is what we
already use in this function for creating settable-after-realize
properties like init-svtor and init-nsvtor.
Note that it doesn't conceptually make sense to change the setting of
the property after the machine has been completely initialized,
beacuse this would mean that the behaviour of the machine when first
started would differ from its behaviour when the system is
subsequently reset. (It would also require the underlying state to
be migrated, which we don't do.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20220127154639.2090164-2-peter.maydell@linaro.org
'Or' the IRQs coming from the QSPI and QSPI DMA models. This is done for
avoiding the situation where one of the models incorrectly deasserts an
interrupt asserted from the other model (which will result in that the IRQ
is lost and will not reach guest SW).
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220203151742.1457-1-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the named bit rather than a bare extract32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When HCR_EL2.E2H is set, the format of CPTR_EL2 changes to
look more like CPACR_EL1, with ZEN and FPEN fields instead
of TZ and TFP fields.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220127063428.30212-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extract entire fields for ZEN and FPEN, rather than testing specific bits.
This makes it easier to follow the code versus the ARM spec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Part of ACPI ERST support
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFCBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmH/lpgPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpntwH+LTJ3MIX5tHL2FWR9vfQoIOQms4A2YJb5GFv
f/wZMQ4Hx/4k3KsicJF4ONJ04cT4IuxtsY9WtUroNcpuh9qy+cMYw61xsd7oa2DB
k7vInrVaDP1pKmNzK+R1DV4VsbghAZzCh23hKKS8HGOd+DM6PWSozzCSpbQGerNX
H61bS7lvESLONhHIJdmo5/d4aGEGlt5xs2KzZe/pwl8OU4/WRYK8MgEKOhvAZT7T
Ups0IDSAOJ5pqzXCLESKFfImNIzak16+lnY9iOMcIFWQVEphMvjkn9jtCu4wvDRe
500GC8i9Q8X3B/D5Y9TB78mDuiqfQP69zBRfhSjgQeU9+eWCxA==
=JIT5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc: features, cleanups, fixes
Part of ACPI ERST support
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 06 Feb 2022 09:36:24 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (24 commits)
util/oslib-posix: Fix missing unlock in the error path of os_mem_prealloc()
ACPI ERST: step 6 of bios-tables-test.c
ACPI ERST: bios-tables-test testcase
ACPI ERST: qtest for ERST
ACPI ERST: create ACPI ERST table for pc/x86 machines
ACPI ERST: build the ACPI ERST table
ACPI ERST: support for ACPI ERST feature
ACPI ERST: header file for ERST
ACPI ERST: PCI device_id for ERST
ACPI ERST: bios-tables-test.c steps 1 and 2
libvhost-user: Map shared RAM with MAP_NORESERVE to support virtio-mem with hugetlb
libvhost-user: handle removal of identical regions
libvhost-user: prevent over-running max RAM slots
libvhost-user: fix VHOST_USER_REM_MEM_REG not closing the fd
libvhost-user: Simplify VHOST_USER_REM_MEM_REG
libvhost-user: Add vu_add_mem_reg input validation
libvhost-user: Add vu_rem_mem_reg input validation
tests: acpi: test short OEM_ID/OEM_TABLE_ID values in test_oem_fields()
tests: acpi: update expected blobs
acpi: fix OEM ID/OEM Table ID padding
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're missing an unlock in case installing the signal handler failed.
Fortunately, we barely see this error in real life.
Fixes: a960d6642d ("util/oslib-posix: Support concurrent os_mem_prealloc() invocation")
Fixes: CID 1468941
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta@ionos.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111120830.119912-1-david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change implements the test suite checks for the ERST table.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-10-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change provides a qtest that locates and then does a simple
interrogation of the ERST feature within the guest.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-9-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change exposes ACPI ERST support for x86 guests.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-8-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This builds the ACPI ERST table to inform OSPM how to communicate
with the acpi-erst device.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-7-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This implements a PCI device for ACPI ERST. This implements the
non-NVRAM "mode" of operation for ERST as it is supported by
Linux and Windows.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-6-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change introduces the public defintions for ACPI ERST.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-5-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change reserves the PCI device_id for the new ACPI ERST
device.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-4-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the guidelines in tests/qtest/bios-tables-test.c, this
change adds empty placeholder files per step 1 for the new ERST
table, and excludes resulting changed files in bios-tables-test-allowed-diff.h
per step 2.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1643402289-22216-2-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For fd-based shared memory, MAP_NORESERVE is only effective for hugetlb,
otherwise it's ignored. Older Linux versions that didn't support
reservation of huge pages ignored MAP_NORESERVE completely.
The first client to mmap a hugetlb fd without MAP_NORESERVE will
trigger reservation of huge pages for the whole mmapped range. There are
two cases to consider:
1) QEMU mapped RAM without MAP_NORESERVE
We're not dealing with a sparse mapping, huge pages for the whole range
have already been reserved by QEMU. An additional mmap() without
MAP_NORESERVE won't have any effect on the reservation.
2) QEMU mapped RAM with MAP_NORESERVE
We're delaing with a sparse mapping, no huge pages should be reserved.
Further mappings without MAP_NORESERVE should be avoided.
For 1), it doesn't matter if we set MAP_NORESERVE or not, so we can
simply set it. For 2), we'd be overriding QEMUs decision and trigger
reservation of huge pages, which might just fail if there are not
sufficient huge pages around. We must map with MAP_NORESERVE.
This change is required to support virtio-mem with hugetlb: a
virtio-mem device mapped into the guest physical memory corresponds to
a sparse memory mapping and QEMU maps this memory with MAP_NORESERVE.
Whenever memory in that sparse region will be accessed by the VM, QEMU
populates huge pages for the affected range by preallocating memory
and handling any preallocation errors gracefully.
So let's map shared RAM with MAP_NORESERVE. As libvhost-user only
supports Linux, there shouldn't be anything to take care of in regard of
other OS support.
Without this change, libvhost-user will fail mapping the region if there
are currently not enough huge pages to perform the reservation:
fv_panic: libvhost-user: region mmap error: Cannot allocate memory
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111123939.132659-1-david@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Today if QEMU (or any other VMM) has sent multiple copies of the same
region to a libvhost-user based backend and then attempts to remove the
region, only one instance of the region will be removed, leaving stale
copies of the region in dev->regions[].
This change resolves this by having vu_rem_mem_reg() iterate through all
regions in dev->regions[] and delete all matching regions.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-7-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
When VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS support was added to
libvhost-user, no guardrails were added to protect against QEMU
attempting to hot-add too many RAM slots to a VM with a libvhost-user
based backed attached.
This change adds the missing error handling by introducing a check on
the number of RAM slots the device has available before proceeding to
process the VHOST_USER_ADD_MEM_REG message.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-6-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We end up not closing the file descriptor, resulting in leaking one
file descriptor for each VHOST_USER_REM_MEM_REG message.
Fixes: 875b9fd97b ("Support individual region unmap in libvhost-user")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-5-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's avoid having to manually copy all elements. Copy only the ones
necessary to close the hole and perform the operation in-place without
a second array.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-4-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Today if multiple FDs are sent from the VMM to the backend in a
VHOST_USER_ADD_MEM_REG message, one FD will be mapped and the remaining
FDs will be leaked. Therefore if multiple FDs are sent we report an
error and fail the operation, closing all FDs in the message.
Likewise in case the VMM sends a message with a size less than that
of a memory region descriptor, we add a check to gracefully report an
error and fail the operation rather than crashing.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-3-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Today if multiple FDs are sent from the VMM to the backend in a
VHOST_USER_REM_MEM_REG message, one FD will be unmapped and the remaining
FDs will be leaked. Therefore if multiple FDs are sent we report an
error and fail the operation, closing all FDs in the message.
Likewise in case the VMM sends a message with a size less than that of a
memory region descriptor, we add a check to gracefully report an error
and fail the operation rather than crashing.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-2-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Previous patch [1] added explicit whitespace padding to OEM_ID/OEM_TABLE_ID
values used in test_oem_fields() testcase to avoid false positive and
bisection issues when QEMU is switched to \0' padding. As result
testcase ceased to test values that were shorter than max possible
length values.
Update testcase to make sure that it's testing shorter IDs like it
used to before [2].
1) "tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for test_oem_fields() test"
2) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220114142641.1727679-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit [2] broke original '\0' padding of OEM ID and OEM Table ID
fields in headers of ACPI tables. While it doesn't have impact on
default values since QEMU uses 6 and 8 characters long values
respectively, it broke usecase where IDs are provided on QEMU CLI.
It shouldn't affect guest (but may cause licensing verification
issues in guest OS).
One of the broken usecases is user supplied SLIC table with IDs
shorter than max possible length, where [2] mangles IDs with extra
spaces in RSDT and FADT tables whereas guest OS expects those to
mirror the respective values of the used SLIC table.
Fix it by replacing whitespace padding with '\0' padding in
accordance with [1] and expectations of guest OS
1) ACPI spec, v2.0b
17.2 AML Grammar Definition
...
//OEM ID of up to 6 characters. If the OEM ID is
//shorter than 6 characters, it can be terminated
//with a NULL character.
2)
Fixes: 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/707
Reported-by: Dmitry V. Orekhov <dima.orekhov@gmail.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20220112130332.1648664-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Tested-by: Dmitry V. Orekhov dima.orekhov@gmail.com
The next commit will revert OEM fields whitespace padding to
padding with '\0' as it was before [1]. That will change OEM
Table ID for:
* SSDT.*: where it was padded from 6 characters to 8
* FACP.slic: where it was padded from 2 characters to 8
after reverting whitespace padding, it will be replaced with
'\0' which effectively will shorten OEM table ID to 6 and 2
characters.
Whitelist affected tables before introducing the change.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next commit will revert OEM fields padding with whitespace to
padding with '\0' as it was before [1]. As result test_oem_fields() will
fail due to unexpectedly smaller ID sizes read from QEMU ACPI tables.
Pad OEM_ID/OEM_TABLE_ID manually with spaces so that values the test
puts on QEMU CLI and expected values match.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have a CONFIG_ISAPC switch - but we're not using it yet.
Add some "#ifdefs" to make it possible to disable this machine now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220107160713.235918-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
__get_cpuid_max returns an unsigned value.
For consistency, store the result in an unsigned variable.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Peter: I expect this to address the iotest 040,041 failures you observed
on NetBSD. If it doesn't, let me know.
-----BEGIN PGP SIGNATURE-----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=Y89B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/python-pull-request' into staging
Python patches
Peter: I expect this to address the iotest 040,041 failures you observed
on NetBSD. If it doesn't, let me know.
# gpg: Signature made Thu 03 Feb 2022 01:59:32 GMT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jsnow-gitlab/tags/python-pull-request:
python/aqmp: add socket bind step to legacy.py
python: upgrade mypy to 0.780
python/machine: raise VMLaunchFailure exception from launch()
python/aqmp: Fix negotiation with pre-"oob" QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYfrIogAKCRD3ErUQojoP
X93ZAP9hqp/FCz/goH7Tpqce6FspHriJm6Ej2Rd7HxZWmh4bpQD/cMjY8qpcA/6r
Nx4bgRPT6kCZwwLx7v2jZ2QsA2KaZAM=
=c0qO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging
Fixes and updates for hppa target
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The synchronous QMP library would bind to the server address during
__init__(). The new library delays this to the accept() call, because
binding occurs inside of the call to start_[unix_]server(), which is an
async method -- so it cannot happen during __init__ anymore.
Python 3.7+ adds the ability to create the server (and thus the bind()
call) and begin the active listening in separate steps, but we don't
have that functionality in 3.6, our current minimum.
Therefore ... Add a temporary workaround that allows the synchronous
version of the client to bind the socket in advance, guaranteeing that
there will be a UNIX socket in the filesystem ready for the QEMU client
to connect to without a race condition.
(Yes, it's a bit ugly. Fixing it more nicely will have to wait until our
minimum Python version is 3.7+.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We need a slightly newer version of mypy in order to use some features
of the asyncio server functions in the next commit.
(Note: pipenv is not really suited to upgrading individual packages; I
need to replace this tool with something better for the task. For now,
the miscellaneous updates not related to the mypy upgrade are simply
beyond my control. It's on my list to take care of soon.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This allows us to pack in some extra information about the failure,
which guarantees that if the caller did not *intentionally* cause a
failure (by capturing this Exception), some pretty good clues will be
printed at the bottom of the traceback information.
This will help make failures in the event of a non-negative return code
more obvious when they go unhandled; the current behavior in
_post_shutdown() is to print a warning message only in the event of
signal-based terminations (for negative return codes).
(Note: In Python, catching BaseException instead of Exception catches a
broader array of Exception events, including SystemExit and
KeyboardInterrupt. We do not want to "wrap" such exceptions as a
VMLaunchFailure, because that will 'downgrade' the exception from a
BaseException to a regular Exception. We do, however, want to perform
cleanup in either case, so catch on the broadest scope and
wrap-and-re-raise only in the more targeted scope.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
QEMU versions prior to the "oob" capability *also* can't accept the
"enable" keyword argument at all. Fix the handshake process with older
QEMU versions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
