- aio fixes by me
- nvme fixes by Paolo and me
- test improvements by Peter, Phil and me
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEUAN8t5cGD3bwIa1WyjViTGqRccYFAltzme8QHGZhbXpAcmVk
aGF0LmNvbQAKCRDKNWJMapFxxl67B/4vLQupmbVXmRaeU3ZqL15tDyXQbTEbWpYo
V04uCeSPe/BlYH0k2VU5Rlrq0gFFlEqTYbw8VOmIjaXj6DlmQRBVaDM0m5q2lc4a
UAgJ4fmFiduTKaYpZ64POI0EGBCdzwdwlh6WW27jTwV8G9Zw3ppCvVv88t397qKF
pCvY+tClOoAZG8No6AI20WUekuHDqE+oeSrRiMYv0zyrP0bNiinvEKartcBvOvH9
iSMv1MOomw21Q+nwMzpe2dkkQU3UR+rfFokJFpjFclYUxP6soTdoF4JLm1gNdOz4
UE+LpreEQ3rPUz2+2ytsVBQ2XQkSIvnX6P8ZS2KPiR2IgXeoG70O
=R9Vh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/block-and-testing-pull-request' into staging
Block and testing patches for 3.1
- aio fixes by me
- nvme fixes by Paolo and me
- test improvements by Peter, Phil and me
# gpg: Signature made Wed 15 Aug 2018 04:11:43 BST
# gpg: using RSA key CA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/block-and-testing-pull-request:
aio-posix: Improve comment around marking node deleted
tests/vm: Add vm-build-all/vm-clean-all in help text
tests/vm: Use make's --output-sync option
tests/vm: Bump guest RAM up from 2G to 4G
tests/vm: Propagate V=1 down into the make inside the VM
tests/vm: Pass the jobs parallelism setting to 'make check'
tests: vm: Add vm-clean-all
tests: Add centos VM testing
tests: Allow overriding archive path with SRC_ARCHIVE
tests: Add an option for snapshot (default: off)
docker: Install more packages in centos7
aio: Do aio_notify_accept only during blocking aio_poll
aio-posix: Don't count ctx->notifier as progress when polling
nvme: simplify plug/unplug
nvme: Fix nvme_init error handling
tests/vm: Add flex and bison to the vm image
tests/vm: Only use -cpu 'host' if KVM is available
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Implement more of ARMv6-M support
* Support direct execution from non-RAM regions;
use this to implmeent execution from small (<1K) MPU regions
* GICv2: implement the virtualization extensions
* support a virtualization-capable GICv2 in the virt and
xlnx-zynqmp boards
* arm: Fix return code of arm_load_elf() so we can detect
failure to load the file correctly
* Implement HCR_EL2.TGE ("trap general exceptions") bit
* Implement tailchaining for M profile cores
* Fix bugs in SVE compare, saturating add/sub, WHILE, MOVZ
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZGAS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180814' into staging
target-arm queue:
* Implement more of ARMv6-M support
* Support direct execution from non-RAM regions;
use this to implmeent execution from small (<1K) MPU regions
* GICv2: implement the virtualization extensions
* support a virtualization-capable GICv2 in the virt and
xlnx-zynqmp boards
* arm: Fix return code of arm_load_elf() so we can detect
failure to load the file correctly
* Implement HCR_EL2.TGE ("trap general exceptions") bit
* Implement tailchaining for M profile cores
* Fix bugs in SVE compare, saturating add/sub, WHILE, MOVZ
# gpg: Signature made Tue 14 Aug 2018 17:23:38 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180814: (45 commits)
target/arm: Fix typo in helper_sve_movz_d
target/arm: Reorganize SVE WHILE
target/arm: Fix typo in do_sat_addsub_64
target/arm: Fix sign of sve_cmpeq_ppzw/sve_cmpne_ppzw
target/arm: Implement tailchaining for M profile cores
target/arm: Restore M-profile CONTROL.SPSEL before any tailchaining
target/arm: Initialize exc_secure correctly in do_v7m_exception_exit()
target/arm: Improve exception-taken logging
target/arm: Treat SCTLR_EL1.M as if it were zero when HCR_EL2.TGE is set
target/arm: Provide accessor functions for HCR_EL2.{IMO, FMO, AMO}
target/arm: Honour HCR_EL2.TGE when raising synchronous exceptions
target/arm: Honour HCR_EL2.TGE and MDCR_EL2.TDE in debug register access checks
target/arm: Mask virtual interrupts if HCR_EL2.TGE is set
arm: Fix return code of arm_load_elf
arm/virt: Add support for GICv2 virtualization extensions
xlnx-zynqmp: Improve GIC wiring and MMIO mapping
intc/arm_gic: Improve traces
intc/arm_gic: Implement maintenance interrupt generation
intc/arm_gic: Implement gic_update_virt() function
intc/arm_gic: Implement the virtual interface registers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the various error classes were removed prior to the 1.2 release.
Remove mentions of the error classes which did not make it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function returns a BDS's driver-specific options, excluding also
those from its children. Since we have just removed all children
options from bs->options there's no need to do this last step.
We allow references to children, though ("backing": "node0"), so those
we still have to remove.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If bdrv_reopen() succeeds then bs->explicit_options is updated with
the new values, but bs->options never changes.
Here's an example:
{ "execute": "blockdev-add",
"arguments": {
"driver": "qcow2",
"node-name": "hd0",
"overlap-check": "all",
"file": {
"driver": "file",
"filename": "hd0.qcow2"
}
}
}
After this, both bs->options and bs->explicit_options contain
"overlap-check": "all".
Now let's change that using qemu-io's reopen command:
(qemu) qemu-io hd0 "reopen -o overlap-check=none"
After this, bs->explicit_options contains the new value but
bs->options still keeps the old one.
This patch updates bs->options after a BDS has been successfully
reopened.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a bdrv_reopen_multiple() call fails, then the explicit_options
QDict has to be deleted for every entry in the reopen queue. This must
happen regardless of whether that entry's bdrv_reopen_prepare() call
succeeded or not.
This patch simplifies the cleanup code a bit.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When bdrv_open_inherit() opens a BlockDriverState the options QDict
can contain options for some of its children, passed in the form of
child-name.option=value
So while each child is opened with that subset of options, those same
options remain stored in the parent BDS, leaving (at least) two copies
of each one of them ("child-name.option=value" in the parent and
"option=value" in the child).
Having the children options stored in the parent is unnecessary and it
can easily lead to an inconsistent state:
$ qemu-img create -f qcow2 hd0.qcow2 10M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-img create -f qcow2 -b hd1.qcow2 hd2.qcow2
$ $QEMU -drive file=hd2.qcow2,node-name=hd2,backing.node-name=hd1
This opens a chain of images hd0 <- hd1 <- hd2. Now let's remove hd1
using block_stream:
(qemu) block_stream hd2 0 hd0.qcow2
After this hd2 contains backing.node-name=hd1, which is no longer
correct because hd1 doesn't exist anymore.
This patch removes all children options from the parent dictionaries
at the end of bdrv_open_inherit() and bdrv_reopen_queue_child().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function extracts all options from a QDict starting with a
certain prefix and puts them in a new QDict.
We'll have a couple of cases where we simply want to discard those
options instead of copying them, and that's what this patch does.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_close handler is optional after previous commit, no needs to keep
empty functions more.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the convert command is creating an output file that needs
secrets, we need to ensure those secrets are passed to both the
blk_new_open and bdrv_create API calls.
This is done by qemu-img extracting all opts matching the name
suffix "key-secret". Unfortunately the code doing this was run after the
call to bdrv_create(), which meant the QemuOpts it was extracting
secrets from was now empty.
Previously this worked by luks as a bug meant the "key-secret"
parameters were not purged from the QemuOpts. This bug was fixed in
commit b76b4f6045
Author: Kevin Wolf <kwolf@redhat.com>
Date: Thu Jan 11 16:18:08 2018 +0100
qcow2: Use visitor for options in qcow2_create()
Exposing the latent bug in qemu-img. This fix simply moves the copying
of secrets to before the bdrv_create() call.
Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-mirror with the same node for source and target segfaults
today: A node is in its own backing chain, so mirror_start_job() decides
that this is an active commit. When adding the intermediate nodes with
block_job_add_bdrv(), it starts the iteration through the subchain with
the backing file of source, though, so it never reaches target and
instead runs into NULL at the base.
While we could fix that by starting with source itself, there is no
point in allowing mirroring a node into itself and I wouldn't be
surprised if this caused more problems later.
So just check for this scenario and error out.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
blockdev-add fails if an invalid node name is given, so we should
document what a valid node name even is.
Reported-by: Cong Li <coli@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cong Li <coli@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
This reinstates commit 6266e900b8,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
We removed all options from the 'deprecated' array, so the code is dead
and can be removed as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This reinstates commit b008326744,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.
Tests need to be updated to set the serial number with -global instead
of using the -drive option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This reinstates commit eae3bd1eb7,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This reinstates commit a7aff6dd10,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.
hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Format drivers such as qcow2 don't allow sharing the same image between
two QEMU instances in order to prevent image corruptions, because of
metadata cache. LUKS driver don't modify metadata except for when
creating image, so it is safe to relax the permission. This makes
share-rw=on property work on virtual devices.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 6fccbb475b fixed a bug caused by
QEMU attempting to remove a throttle group member with no pending
requests but an active timer set. This was the result of a previous
bdrv_drained_begin() call processing the throttled requests but
leaving the timer untouched.
Although the commit does solve the problem, the situation shouldn't
happen in the first place. If we try to drain a throttle group member
which has a timer set, we should cancel the timer instead of ignoring
it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous patch fixes a problem in which draining a block device
with more than one throttled request can make it wait first for the
completion of requests in other members of the same group.
This patch updates test_remove_group_member() in iotest 093 to
reproduce that scenario. This updated test would hang QEMU without the
fix from the previous patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the throttling code after an I/O request has been completed the
next one is selected from a different member using a round-robin
algorithm. This ensures that all members get a chance to finish their
pending I/O requests.
However, if a group member has its I/O limits disabled (because it's
being drained) then we should always give it priority in order to have
all its pending requests finished as soon as possible.
If we don't do this we could have a member in the process of being
drained waiting for the throttled requests of other members, for which
the I/O limits still apply.
This can have additional consequences: if we're running in qtest mode
(with QEMU_CLOCK_VIRTUAL) then timers can only fire if we advance the
clock manually, so attempting to drain a block device can hang QEMU in
the BDRV_POLL_WHILE() loop at the end of bdrv_do_drained_begin().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A throttle group can have several members, and each one of them can
have several pending requests in the queue.
The requests are processed in a round-robin fashion, so the algorithm
decides the drive that is going to run the next request and sets a
timer in it. Once the timer fires and the throttled request is run
then the next drive from the group is selected and a new timer is set.
If the user tried to remove a drive from a group and that drive had a
timer set then the code was not taking care of setting up a new timer
in one of the remaining members of the group, freezing their I/O.
This problem was fixed in 6fccbb475b,
and this patch adds a new test case that reproduces this exact
scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For BlockBackends that are skipped in query-blockstats, we would leak
info since commit 567dcb31. Allocate info only later to avoid the memory
leak.
Fixes: CID 1394727
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Spotted by ASAN, during make check...
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f8e27262c48 in malloc (/lib64/libasan.so.5+0xeec48)
#1 0x7f8e26a5f3c5 in g_malloc (/lib64/libglib-2.0.so.0+0x523c5)
#2 0x555ab67078a8 in qstring_from_str /home/elmarco/src/qq/qobject/qstring.c:67
#3 0x555ab67071e4 in qstring_new /home/elmarco/src/qq/qobject/qstring.c:24
#4 0x555ab6713fbf in qstring_from_escaped_str /home/elmarco/src/qq/qobject/json-parser.c:144
#5 0x555ab671738c in parse_literal /home/elmarco/src/qq/qobject/json-parser.c:506
#6 0x555ab67179c3 in parse_value /home/elmarco/src/qq/qobject/json-parser.c:569
#7 0x555ab6715123 in parse_pair /home/elmarco/src/qq/qobject/json-parser.c:306
#8 0x555ab6715483 in parse_object /home/elmarco/src/qq/qobject/json-parser.c:357
#9 0x555ab671798b in parse_value /home/elmarco/src/qq/qobject/json-parser.c:561
#10 0x555ab6717a6b in json_parser_parse_err /home/elmarco/src/qq/qobject/json-parser.c:592
#11 0x555ab4fd4dcf in handle_qmp_command /home/elmarco/src/qq/monitor.c:4257
#12 0x555ab6712c4d in json_message_process_token /home/elmarco/src/qq/qobject/json-streamer.c:105
#13 0x555ab67e01e2 in json_lexer_feed_char /home/elmarco/src/qq/qobject/json-lexer.c:323
#14 0x555ab67e0af6 in json_lexer_feed /home/elmarco/src/qq/qobject/json-lexer.c:373
#15 0x555ab6713010 in json_message_parser_feed /home/elmarco/src/qq/qobject/json-streamer.c:124
#16 0x555ab4fd58ec in monitor_qmp_read /home/elmarco/src/qq/monitor.c:4337
#17 0x555ab6559df2 in qemu_chr_be_write_impl /home/elmarco/src/qq/chardev/char.c:175
#18 0x555ab6559e95 in qemu_chr_be_write /home/elmarco/src/qq/chardev/char.c:187
#19 0x555ab6560127 in fd_chr_read /home/elmarco/src/qq/chardev/char-fd.c:66
#20 0x555ab65d9c73 in qio_channel_fd_source_dispatch /home/elmarco/src/qq/io/channel-watch.c:84
#21 0x7f8e26a598ac in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x4c8ac)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180809114417.28718-4-marcandre.lureau@redhat.com>
[Screwed up in commit b27314567d]
Cc: qemu-stable@nongnu.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix the following issues:
common.py:873:13: E129 visually indented line with same indent as next logical line
common.py:1766:5: E741 ambiguous variable name 'l'
common.py:1784:1: E305 expected 2 blank lines after class or function definition, found 1
common.py:1833:1: E305 expected 2 blank lines after class or function definition, found 1
common.py:1843:1: E305 expected 2 blank lines after class or function definition, found 1
visit.py:181:18: E127 continuation line over-indented for visual indent
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180621083551.775-1-armbru@redhat.com>
[Fixup squashed in:]
Message-ID: <871sd0nzw9.fsf@dusky.pond.sub.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Presumably 0.15 was the version it was first introduced, but
qmp keeps evolving. There is no point in having that version
as test prefix, 'qmp' makes more sense here.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180326150916.9602-12-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use shlex to split the CLI command, respecting quoted arguments, and
also comments. This allows to call for ex:
(QEMU) human-monitor-command command-line="screendump /dev/null"
{"execute": "human-monitor-command", "arguments": {"command-line": "screendump /dev/null"}}
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180326150916.9602-3-marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The counter is for qemu_lockcnt_inc/dec sections (read side),
qemu_lockcnt_lock/unlock is for the write side.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180803063917.30292-1-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Use make's --output-sync option when running tests inside VMs,
so that if we're building with parallelization the output doesn't
get scrambled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180803085230.30574-6-peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently we run the guests in a VM which is given only 2G of RAM.
Since the guests are configured without any swap space, builds
can fail because the system runs out of memory and kills the
compiler, especially if the job count is set for a lot of
parallelism. Bump the setting up from 2G to 4G to give us some
more headroom.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180803085230.30574-5-peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Invoking 'make vm-build-freebsd' and friends with V=1 should
propagate that verbosity setting down into the build run
inside the VM. Make sure we do that. This brings it into
line with how the container tests handle V=1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180803085230.30574-4-peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Our test suite works for parallel execution too, and this can
noticeably speed up a test run; pass the 'jobs' setting to
it as well as to the build proper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180803085230.30574-3-peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
The images are big. Add a rule to clean up easily.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180716020008.31468-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
This one does docker testing in the VM. It is intended to replace the
native docker testing on patchew testers.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180712012829.20231-5-famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
In VM based tests, the source archive is created in host, we don't have
to run archive-source.sh again, as it complicates the Makefile and
scripts.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180712012829.20231-4-famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Not using snapshot has the benefit of automatically persisting useful
test harnesses, such as docker images and ccache database. Although it
will lose some cleanness, it is imaginably useful for patchew.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180712012829.20231-2-famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
An aio_notify() pairs with an aio_notify_accept(). The former should
happen in the main thread or a vCPU thread, and the latter should be
done in the IOThread.
There is one rare case that the main thread or vCPU thread may "steal"
the aio_notify() event just raised by itself, in bdrv_set_aio_context()
[1]. The sequence is like this:
main thread IO Thread
===============================================================
bdrv_drained_begin()
aio_disable_external(ctx)
aio_poll(ctx, true)
ctx->notify_me += 2
...
bdrv_drained_end()
...
aio_notify()
...
bdrv_set_aio_context()
aio_poll(ctx, false)
[1] aio_notify_accept(ctx)
ppoll() /* Hang! */
[1] is problematic. It will clear the ctx->notifier event so that
the blocked ppoll() will not return.
(For the curious, this bug was noticed when booting a number of VMs
simultaneously in RHV. One or two of the VMs will hit this race
condition, making the VIRTIO device unresponsive to I/O commands. When
it hangs, Seabios is busy waiting for a read request to complete (read
MBR), right after initializing the virtio-blk-pci device, using 100%
guest CPU. See also https://bugzilla.redhat.com/show_bug.cgi?id=1562750
for the original bug analysis.)
aio_notify() only injects an event when ctx->notify_me is set,
correspondingly aio_notify_accept() is only useful when ctx->notify_me
_was_ set. Move the call to it into the "blocking" branch. This will
effectively skip [1] and fix the hang.
Furthermore, blocking aio_poll is only allowed on home thread
(in_aio_context_home_thread), because otherwise two blocking
aio_poll()'s can steal each other's ctx->notifier event and cause
hanging just like described above.
Cc: qemu-stable@nongnu.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180809132259.18402-3-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The same logic exists in fd polling. This change is especially important
to avoid busy loop once we limit aio_notify_accept() to blocking
aio_poll().
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180809132259.18402-2-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
bdrv_io_plug/bdrv_io_unplug take care of keeping a nesting count,
so change s->plugged to just a bool.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180813144320.12382-2-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
It is wrong to leave this field as 1, as nvme_close() called in the
error handling code in nvme_file_open() will use it and try to free
s->queues again.
Another problem is the cleaning ups are duplicated between the fail*
labels of nvme_init() and nvme_file_open(), which calls nvme_close().
A third problem is nvme_close() misses g_free() and
event_notifier_cleanup().
Fix all of them.
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180712025420.4932-1-famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Similar to 79f24568e5, this fixes the following warnings:
CHK version_gen.h
LEX convert-dtsv0-lexer.lex.c
make[1]: flex: Command not found
BISON dtc-parser.tab.c
make[1]: bison: Command not found
LEX dtc-lexer.lex.c
make[1]: flex: Command not found
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180628153535.1411-5-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
If KVM is not available, then use the 'max' cpu.
This fixes:
ERROR:root:Log:
ERROR:root:qemu-system-x86_64: CPU model 'host' requires KVM
Failed to prepare guest environment
error: [Errno 104] Connection reset by peer
source/qemu/tests/vm/Makefile.include:25: recipe for target 'tests/vm/ubuntu.i386.img' failed
make: *** [tests/vm/ubuntu.i386.img] Error 2
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180628153535.1411-4-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
The pseudocode for this operation is an increment + compare loop,
so comparing <= the maximum integer produces an all-true predicate.
Rather than bound in both the inline code and the helper, pass the
helper the number of predicate bits to set instead of the number
of predicate elements to set.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Used the wrong temporary in the computation of subtractive overflow.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
