Commit Graph

31282 Commits

Author SHA1 Message Date
Peter Maydell
39f29e5993 hw/intc/arm_gicv3: Use correct number of priority bits for the CPU
Make the GICv3 set its number of bits of physical priority from the
implementation-specific value provided in the CPU state struct, in
the same way we already do for virtual priority bits.  Because this
would be a migration compatibility break, we provide a property
force-8-bit-prio which is enabled for 7.0 and earlier versioned board
models to retain the legacy "always use 8 bits" behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-6-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-5-peter.maydell@linaro.org
2022-05-19 16:19:02 +01:00
Peter Maydell
84597ff394 hw/intc/arm_gicv3: Support configurable number of physical priority bits
The GICv3 code has always supported a configurable number of virtual
priority and preemption bits, but our implementation currently
hardcodes the number of physical priority bits at 8.  This is not
what most hardware implementations provide; for instance the
Cortex-A53 provides only 5 bits of physical priority.

Make the number of physical priority/preemption bits driven by fields
in the GICv3CPUState, the way that we already do for virtual
priority/preemption bits.  We set cs->pribits to 8, so there is no
behavioural change in this commit.  A following commit will add the
machinery for CPUs to set this to the correct value for their
implementation.

Note that changing the number of priority bits would be a migration
compatibility break, because the semantics of the icc_apr[][] array
changes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-5-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-4-peter.maydell@linaro.org
2022-05-19 16:19:02 +01:00
Peter Maydell
9774c0f7ba hw/intc/arm_gicv3_kvm.c: Stop using GIC_MIN_BPR constant
The GIC_MIN_BPR constant defines the minimum BPR value that the TCG
emulated GICv3 supports.  We're currently using this also as the
value we reset the KVM GICv3 ICC_BPR registers to, but this is only
right by accident.

We want to make the emulated GICv3 use a configurable number of
priority bits, which means that GIC_MIN_BPR will no longer be a
constant.  Replace the uses in the KVM reset code with literal 0,
plus a constant explaining why this is reasonable.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-4-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-3-peter.maydell@linaro.org
2022-05-19 16:19:02 +01:00
Peter Maydell
9c6f933e71 hw/intc/arm_gicv3: report correct PRIbits field in ICV_CTLR_EL1
As noted in the comment, the PRIbits field in ICV_CTLR_EL1 is
supposed to match the ICH_VTR_EL2 PRIbits setting; that is, it is the
virtual priority bit setting, not the physical priority bit setting.
(For QEMU currently we always implement 8 bits of physical priority,
so the PRIbits field was previously 7, since it is defined to be
"priority bits - 1".)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-3-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-2-peter.maydell@linaro.org
2022-05-19 16:19:02 +01:00
Peter Maydell
272f75e890 hw/intc/arm_gicv3_cpuif: Handle CPUs that don't specify GICv3 parameters
We allow a GICv3 to be connected to any CPU, but we don't do anything
to handle the case where the CPU type doesn't in hardware have a
GICv3 CPU interface and so the various GIC configuration fields
(gic_num_lrs, vprebits, vpribits) are not specified.

The current behaviour is that we will add the EL1 CPU interface
registers, but will not put in the EL2 CPU interface registers, even
if the CPU has EL2, which will leave the GIC in a broken state and
probably result in the guest crashing as it tries to set it up.  This
only affects the virt board when using the cortex-a15 or cortex-a7
CPU types (both 32-bit) with -machine gic-version=3 (or 'max')
and -machine virtualization=on.

Instead of failing to set up the EL2 registers, if the CPU doesn't
define the GIC configuration set it to a reasonable default, matching
the standard configuration for most Arm CPUs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-2-peter.maydell@linaro.org
2022-05-19 16:19:02 +01:00
Richard Henderson
78ac2eebba hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
 HP fonts were added to the firmware and the firmware boot console was fixed to
 accept input from the emulated PS/2 keyboard when running in graphical mode
 (serial console was working before already). To test use the "-boot menu=on"
 qemu option.
 
 The artist graphics card driver got various fixes when running the X11-Windows
 on HP-UX:
 - fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
 - allows X11 to blank the screen (e.g. screensaver)
 - allows the X11 driver to turn the X11 cursor on/off
 
 Signed-off-by: Helge Deller <deller@gmx.de>
 
 --
 Changes compared to version 2 of this series:
 - Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
 
 Changes compared to version 1 of this series:
 - Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
 - SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
 - integrated artist X11 X-cusor positioning fix (which was sent serperately before)
 
 --
 This series should apply cleanly on git head and can be pulled for testing
 from: https://github.com/hdeller/qemu-hppa.git   artist-cursor-fix-final
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
 X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
 2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
 =ZrTm
 -----END PGP SIGNATURE-----

Merge tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa into staging

hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console

This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.

The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off

Signed-off-by: Helge Deller <deller@gmx.de>

--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)

Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)

--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git   artist-cursor-fix-final

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
# X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
# 2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
# =ZrTm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 May 2022 09:17:51 AM PDT
# gpg:                using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg:                 aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D  25F8 3E5F 3D04 A7A2 4603
#      Subkey fingerprint: BCE9 123E 1AD2 9F07 C049  BBDE F712 B510 A23A 0F5F

* tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa:
  artist: Fix X cursor position calculation in X11
  artist: Emulate screen blanking
  artist: Allow to turn cursor on or off
  artist: Fix vertical X11 cursor position in HP-UX
  artist: Use human-readable variable names instead of reg_xxx
  artist: Introduce constant for max cursor size
  seabios-hppa: Update SeaBIOS-hppa to VERSION 5

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-18 09:32:15 -07:00
Helge Deller
052c2579b8 tulip: Assign default MAC address if not specified
The MAC of the tulip card is stored in the EEPROM and at startup
tulip_fill_eeprom() is called to initialize the EEPROM with the MAC
address given on the command line, e.g.:
    -device tulip,mac=00:11:22:33:44:55

In case the mac address was not given on the command line,
tulip_fill_eeprom() initializes the MAC in EEPROM with 00:00:00:00:00:00
which breaks e.g. a HP-UX guest.

Fix this problem by moving qemu_macaddr_default_if_unset() a few lines
up, so that a default mac address is assigned before tulip_fill_eeprom()
initializes the EEPROM.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-05-17 16:48:23 +08:00
Richard Henderson
eec398119f virtio,pc,pci: fixes,cleanups,features
most of CXL support
 fixes, cleanups all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
 MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
 SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
 PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
 f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
 =xdSk
 -----END PGP SIGNATURE-----

Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes,cleanups,features

most of CXL support
fixes, cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
# MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
# SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
# 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
# PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
# f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
# =xdSk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 May 2022 01:48:50 PM PDT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (86 commits)
  vhost-user-scsi: avoid unlink(NULL) with fd passing
  virtio-net: don't handle mq request in userspace handler for vhost-vdpa
  vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request()
  vhost-vdpa: backend feature should set only once
  vhost-net: fix improper cleanup in vhost_net_start
  vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa
  virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa
  virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated
  hw/i386/amd_iommu: Fix IOMMU event log encoding errors
  hw/i386: Make pic a property of common x86 base machine type
  hw/i386: Make pit a property of common x86 base machine type
  include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX
  include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK
  docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG
  vhost-user: more master/slave things
  virtio: add vhost support for virtio devices
  virtio: drop name parameter for virtio_init()
  virtio/vhost-user: dynamically assign VhostUserHostNotifiers
  hw/virtio/vhost-user: don't suppress F_CONFIG when supported
  include/hw: start documenting the vhost API
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-16 16:31:01 -07:00
Richard Henderson
afdb415e67 * fix WHPX debugging
* misc qga-vss fixes
 * remove the deprecated CPU model 'Icelake-Client'
 * support for x86 architectural LBR
 * remove deprecated properties
 * replace deprecated -soundhw with -audio
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ/hZ4UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroN2Igf/bFs+yluOikt0eFNmXYnshrGBWPXr
 oam0iumPox34vTzZnjpSjF6tJGxHWOgi+wbgIvbwOYHA/ONxx8akW580j+1VhEWa
 X29VyUzjZBffgFtmlF4fM74/ELYm7s4c1a1/D9TpVP6Dr0fSWbMujbx4dfeVstvf
 sONN+A8sVxaNdV9QKPE6BvqfMlPLoCiigrOetf6iY1KuUtkQDF8xDB0MdzdutqAQ
 szAtQ0rrzjxDx9EuGN1SECFM1/riDUbtOOoA9g2C7gGKrx3/iUc6pzrkIcAfWLFK
 xXbH7+6Wynia0cbUxnrvRdY4daMIxm4N3wUvN7szXgF9kxYxeQcsdgGsNA==
 =n4lu
 -----END PGP SIGNATURE-----

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* fix WHPX debugging
* misc qga-vss fixes
* remove the deprecated CPU model 'Icelake-Client'
* support for x86 architectural LBR
* remove deprecated properties
* replace deprecated -soundhw with -audio

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ/hZ4UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroN2Igf/bFs+yluOikt0eFNmXYnshrGBWPXr
# oam0iumPox34vTzZnjpSjF6tJGxHWOgi+wbgIvbwOYHA/ONxx8akW580j+1VhEWa
# X29VyUzjZBffgFtmlF4fM74/ELYm7s4c1a1/D9TpVP6Dr0fSWbMujbx4dfeVstvf
# sONN+A8sVxaNdV9QKPE6BvqfMlPLoCiigrOetf6iY1KuUtkQDF8xDB0MdzdutqAQ
# szAtQ0rrzjxDx9EuGN1SECFM1/riDUbtOOoA9g2C7gGKrx3/iUc6pzrkIcAfWLFK
# xXbH7+6Wynia0cbUxnrvRdY4daMIxm4N3wUvN7szXgF9kxYxeQcsdgGsNA==
# =n4lu
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 14 May 2022 03:34:06 AM PDT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
  configure: remove duplicate help messages
  configure: remove another dead variable
  build: remove useless dependency
  introduce -audio as a replacement for -soundhw
  soundhw: move help handling to vl.c
  soundhw: unify initialization for ISA and PCI soundhw
  soundhw: extract soundhw help to a separate function
  soundhw: remove ability to create multiple soundcards
  rng: make opened property read-only
  crypto: make loaded property read-only
  target/i386: Support Arch LBR in CPUID enumeration
  target/i386: introduce helper to access supported CPUID
  target/i386: Enable Arch LBR migration states in vmstate
  target/i386: Add MSR access interface for Arch LBR
  target/i386: Add XSAVES support for Arch LBR
  target/i386: Enable support for XSAVES based features
  target/i386: Add kvm_get_one_msr helper
  target/i386: Add lbr-fmt vPMU option to support guest LBR
  qdev-properties: Add a new macro with bitmask check for uint64_t property
  i386/cpu: Remove the deprecated cpu model 'Icelake-Client'
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-16 14:21:50 -07:00
Si-Wei Liu
2a7888cc3a virtio-net: don't handle mq request in userspace handler for vhost-vdpa
virtio_queue_host_notifier_read() tends to read pending event
left behind on ioeventfd in the vhost_net_stop() path, and
attempts to handle outstanding kicks from userspace vq handler.
However, in the ctrl_vq handler, virtio_net_handle_mq() has a
recursive call into virtio_net_set_status(), which may lead to
segmentation fault as shown in below stack trace:

0  0x000055f800df1780 in qdev_get_parent_bus (dev=0x0) at ../hw/core/qdev.c:376
1  0x000055f800c68ad8 in virtio_bus_device_iommu_enabled (vdev=vdev@entry=0x0) at ../hw/virtio/virtio-bus.c:331
2  0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>) at ../hw/virtio/vhost.c:318
3  0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>, buffer=0x7fc19bec5240, len=2052, is_write=1, access_len=2052) at ../hw/virtio/vhost.c:336
4  0x000055f800d71867 in vhost_virtqueue_stop (dev=dev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590, vq=0x55f8037cceb0, idx=0) at ../hw/virtio/vhost.c:1241
5  0x000055f800d7406c in vhost_dev_stop (hdev=hdev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590) at ../hw/virtio/vhost.c:1839
6  0x000055f800bf00a7 in vhost_net_stop_one (net=0x55f8037ccc30, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:315
7  0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1)
   at ../hw/net/vhost_net.c:423
8  0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296
9  0x000055f800d4e628 in virtio_net_set_status (vdev=vdev@entry=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370
10 0x000055f800d534d8 in virtio_net_handle_ctrl (iov_cnt=<optimized out>, iov=<optimized out>, cmd=0 '\000', n=0x55f8044ec590) at ../hw/net/virtio-net.c:1408
11 0x000055f800d534d8 in virtio_net_handle_ctrl (vdev=0x55f8044ec590, vq=0x7fc1a7e888d0) at ../hw/net/virtio-net.c:1452
12 0x000055f800d69f37 in virtio_queue_host_notifier_read (vq=0x7fc1a7e888d0) at ../hw/virtio/virtio.c:2331
13 0x000055f800d69f37 in virtio_queue_host_notifier_read (n=n@entry=0x7fc1a7e8894c) at ../hw/virtio/virtio.c:3575
14 0x000055f800c688e6 in virtio_bus_cleanup_host_notifier (bus=<optimized out>, n=n@entry=14) at ../hw/virtio/virtio-bus.c:312
15 0x000055f800d73106 in vhost_dev_disable_notifiers (hdev=hdev@entry=0x55f8035b51b0, vdev=vdev@entry=0x55f8044ec590)
   at ../../../include/hw/virtio/virtio-bus.h:35
16 0x000055f800bf00b2 in vhost_net_stop_one (net=0x55f8035b51b0, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:316
17 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1)
   at ../hw/net/vhost_net.c:423
18 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296
19 0x000055f800d4e628 in virtio_net_set_status (vdev=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370
20 0x000055f800d6c4b2 in virtio_set_status (vdev=0x55f8044ec590, val=<optimized out>) at ../hw/virtio/virtio.c:1945
21 0x000055f800d11d9d in vm_state_notify (running=running@entry=false, state=state@entry=RUN_STATE_SHUTDOWN) at ../softmmu/runstate.c:333
22 0x000055f800d04e7a in do_vm_stop (state=state@entry=RUN_STATE_SHUTDOWN, send_stop=send_stop@entry=false) at ../softmmu/cpus.c:262
23 0x000055f800d04e99 in vm_shutdown () at ../softmmu/cpus.c:280
24 0x000055f800d126af in qemu_cleanup () at ../softmmu/runstate.c:812
25 0x000055f800ad5b13 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51

For now, temporarily disable handling MQ request from the ctrl_vq
userspace hanlder to avoid the recursive virtio_net_set_status()
call. Some rework is needed to allow changing the number of
queues without going through a full virtio_net_set_status cycle,
particularly for vhost-vdpa backend.

This patch will need to be reverted as soon as future patches of
having the change of #queues handled in userspace is merged.

Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-8-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 16:15:41 -04:00
Si-Wei Liu
d71b0609fc vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request()
The name vhost_vdpa_one_time_request() was confusing. No
matter whatever it returns, its typical occurrence had
always been at requests that only need to be applied once.
And the name didn't suggest what it actually checks for.
Change it to vhost_vdpa_first_dev() with polarity flipped
for better readibility of code. That way it is able to
reflect what the check is really about.

This call is applicable to request which performs operation
only once, before queues are set up, and usually at the beginning
of the caller function. Document the requirement for it in place.

Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1651890498-24478-7-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
2022-05-16 16:15:41 -04:00
Si-Wei Liu
6aee7e4233 vhost-vdpa: backend feature should set only once
The vhost_vdpa_one_time_request() branch in
vhost_vdpa_set_backend_cap() incorrectly sends down
ioctls on vhost_dev with non-zero index. This may
end up with multiple VHOST_SET_BACKEND_FEATURES
ioctl calls sent down on the vhost-vdpa fd that is
shared between all these vhost_dev's.

To fix it, send down ioctl only once via the first
vhost_dev with index 0. Toggle the polarity of the
vhost_vdpa_one_time_request() test should do the
trick.

Fixes: 4d191cfdc7 ("vhost-vdpa: classify one time request")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1651890498-24478-6-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 16:15:41 -04:00
Si-Wei Liu
6f3910b5ee vhost-net: fix improper cleanup in vhost_net_start
vhost_net_start() missed a corresponding stop_one() upon error from
vhost_set_vring_enable(). While at it, make the error handling for
err_start more robust. No real issue was found due to this though.

Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-5-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 16:15:41 -04:00
Si-Wei Liu
68b0a6395f virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa
With MQ enabled vdpa device and non-MQ supporting guest e.g.
booting vdpa with mq=on over OVMF of single vqp, below assert
failure is seen:

../hw/virtio/vhost-vdpa.c:560: vhost_vdpa_get_vq_index: Assertion `idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs' failed.

0  0x00007f8ce3ff3387 in raise () at /lib64/libc.so.6
1  0x00007f8ce3ff4a78 in abort () at /lib64/libc.so.6
2  0x00007f8ce3fec1a6 in __assert_fail_base () at /lib64/libc.so.6
3  0x00007f8ce3fec252 in  () at /lib64/libc.so.6
4  0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:563
5  0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:558
6  0x0000558f52d7329a in vhost_virtqueue_mask (hdev=0x558f55c01800, vdev=0x558f568f91f0, n=2, mask=<optimized out>) at ../hw/virtio/vhost.c:1557
7  0x0000558f52c6b89a in virtio_pci_set_guest_notifier (d=d@entry=0x558f568f0f60, n=n@entry=2, assign=assign@entry=true, with_irqfd=with_irqfd@entry=false)
   at ../hw/virtio/virtio-pci.c:974
8  0x0000558f52c6c0d8 in virtio_pci_set_guest_notifiers (d=0x558f568f0f60, nvqs=3, assign=true) at ../hw/virtio/virtio-pci.c:1019
9  0x0000558f52bf091d in vhost_net_start (dev=dev@entry=0x558f568f91f0, ncs=0x558f56937cd0, data_queue_pairs=data_queue_pairs@entry=1, cvq=cvq@entry=1)
   at ../hw/net/vhost_net.c:361
10 0x0000558f52d4e5e7 in virtio_net_set_status (status=<optimized out>, n=0x558f568f91f0) at ../hw/net/virtio-net.c:289
11 0x0000558f52d4e5e7 in virtio_net_set_status (vdev=0x558f568f91f0, status=15 '\017') at ../hw/net/virtio-net.c:370
12 0x0000558f52d6c4b2 in virtio_set_status (vdev=vdev@entry=0x558f568f91f0, val=val@entry=15 '\017') at ../hw/virtio/virtio.c:1945
13 0x0000558f52c69eff in virtio_pci_common_write (opaque=0x558f568f0f60, addr=<optimized out>, val=<optimized out>, size=<optimized out>) at ../hw/virtio/virtio-pci.c:1292
14 0x0000558f52d15d6e in memory_region_write_accessor (mr=0x558f568f19d0, addr=20, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized out>, attrs=...)
   at ../softmmu/memory.c:492
15 0x0000558f52d127de in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f8cdbffe748, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x558f52d15cf0 <memory_region_write_accessor>, mr=0x558f568f19d0, attrs=...) at ../softmmu/memory.c:554
16 0x0000558f52d157ef in memory_region_dispatch_write (mr=mr@entry=0x558f568f19d0, addr=20, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...)
   at ../softmmu/memory.c:1504
17 0x0000558f52d078e7 in flatview_write_continue (fv=fv@entry=0x7f8accbc3b90, addr=addr@entry=103079215124, attrs=..., ptr=ptr@entry=0x7f8ce6300028, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x558f568f19d0) at /home/opc/qemu-upstream/include/qemu/host-utils.h:165
18 0x0000558f52d07b06 in flatview_write (fv=0x7f8accbc3b90, addr=103079215124, attrs=..., buf=0x7f8ce6300028, len=1) at ../softmmu/physmem.c:2822
19 0x0000558f52d0b36b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>)
   at ../softmmu/physmem.c:2914
20 0x0000558f52d0b3da in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=...,
   attrs@entry=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>, is_write=<optimized out>) at ../softmmu/physmem.c:2924
21 0x0000558f52dced09 in kvm_cpu_exec (cpu=cpu@entry=0x558f55c2da60) at ../accel/kvm/kvm-all.c:2903
22 0x0000558f52dcfabd in kvm_vcpu_thread_fn (arg=arg@entry=0x558f55c2da60) at ../accel/kvm/kvm-accel-ops.c:49
23 0x0000558f52f9f04a in qemu_thread_start (args=<optimized out>) at ../util/qemu-thread-posix.c:556
24 0x00007f8ce4392ea5 in start_thread () at /lib64/libpthread.so.0
25 0x00007f8ce40bb9fd in clone () at /lib64/libc.so.6

The cause for the assert failure is due to that the vhost_dev index
for the ctrl vq was not aligned with actual one in use by the guest.
Upon multiqueue feature negotiation in virtio_net_set_multiqueue(),
if guest doesn't support multiqueue, the guest vq layout would shrink
to a single queue pair, consisting of 3 vqs in total (rx, tx and ctrl).
This results in ctrl_vq taking a different vhost_dev group index than
the default. We can map vq to the correct vhost_dev group by checking
if MQ is supported by guest and successfully negotiated. Since the
MQ feature is only present along with CTRL_VQ, we ensure the index
2 is only meant for the control vq while MQ is not supported by guest.

Fixes: 22288fe ("virtio-net: vhost control virtqueue support")
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-3-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 16:15:40 -04:00
Si-Wei Liu
aa8581945a virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated
When the control virtqueue feature is absent or not negotiated,
vhost_net_start() still tries to set up vhost_dev and install
vhost notifiers for the control virtqueue, which results in
erroneous ioctl calls with incorrect queue index sending down
to driver. Do that only when needed.

Fixes: 22288fe ("virtio-net: vhost control virtqueue support")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-2-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 16:15:40 -04:00
Wei Huang
18aa91cddd hw/i386/amd_iommu: Fix IOMMU event log encoding errors
Coverity issues several UNINIT warnings against amd_iommu.c [1]. This
patch fixes them by clearing evt before encoding. On top of it, this
patch changes the event log size to 16 bytes per IOMMU specification,
and fixes the event log entry format in amdvi_encode_event().

[1] CID 1487116/1487200/1487190/1487232/1487115/1487258

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20220422055146.3312226-1-wei.huang2@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 16:15:40 -04:00
Xiaoyao Li
c300bbe8d2 hw/i386: Make pic a property of common x86 base machine type
Legacy PIC (8259) cannot be supported for TDX guests since TDX module
doesn't allow directly interrupt injection.  Using posted interrupts
for the PIC is not a viable option as the guest BIOS/kernel will not
do EOI for PIC IRQs, i.e. will leave the vIRR bit set.

Make PIC the property of common x86 machine type. Hence all x86
machines, including microvm, can disable it.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220310122811.807794-3-xiaoyao.li@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 16:15:40 -04:00
Xiaoyao Li
9dee7e5109 hw/i386: Make pit a property of common x86 base machine type
Both pc and microvm have pit property individually. Let's just make it
the property of common x86 base machine type.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220310122811.807794-2-xiaoyao.li@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 16:15:40 -04:00
Helge Deller
9ef2c6b4ab artist: Fix X cursor position calculation in X11
The X cursor postion can be calculated based on the backporch and
interleave values.  In the emulation we ignore the HP-UX settings for
backporch and use instead twice the size of the emulated cursor.  With
those changes the X-position of the graphics cursor is now finally
working correctly on HP-UX 10 and HP-UX 11.

Based on coding in Xorg X11R6.6

Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-16 16:46:25 +02:00
Helge Deller
caca6e618d artist: Emulate screen blanking
The misc_video and misc_ctrl registers control the visibility of the
screen. Start with the screen turned on, and hide or show the screen
based on the control registers.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-16 15:58:22 +02:00
Helge Deller
a377b574eb artist: Allow to turn cursor on or off
Bit 0x80 in the cursor_cntrl register specifies if the cursor
should be visible. Prevent rendering the cursor if it's invisible.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-16 15:58:22 +02:00
Helge Deller
482afe020b artist: Fix vertical X11 cursor position in HP-UX
Drop the hard-coded value of 1146 lines which seems to work with HP-UX
11, but not with HP-UX 10. Instead encode the screen height in byte 0 of
active_lines_low and byte 3 of misc_video as it's expected by the Xorg
X11 graphics driver.

This potentially allows for higher vertical screen resolutions than
1280x1024 with X11.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-16 15:58:22 +02:00
Helge Deller
e9683fbc37 artist: Use human-readable variable names instead of reg_xxx
Convert the variable names of some registers to human-readable and
understandable names.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-16 15:58:22 +02:00
Helge Deller
7e50730cb8 artist: Introduce constant for max cursor size
Add the constant NGLE_MAX_SPRITE_SIZE which defines the currently
maximum supported cursor size.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-16 15:58:22 +02:00
Leonardo Bras
b88651cb4d QIOChannel: Add flags on io_writev and introduce io_flush callback
Add flags to io_writev and introduce io_flush as optional callback to
QIOChannelClass, allowing the implementation of zero copy writes by
subclasses.

How to use them:
- Write data using qio_channel_writev*(...,QIO_CHANNEL_WRITE_FLAG_ZERO_COPY),
- Wait write completion with qio_channel_flush().

Notes:
As some zero copy write implementations work asynchronously, it's
recommended to keep the write buffer untouched until the return of
qio_channel_flush(), to avoid the risk of sending an updated buffer
instead of the buffer state during write.

As io_flush callback is optional, if a subclass does not implement it, then:
- io_flush will return 0 without changing anything.

Also, some functions like qio_channel_writev_full_all() were adapted to
receive a flag parameter. That allows shared code between zero copy and
non-zero copy writev, and also an easier implementation on new flags.

Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220513062836.965425-3-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-05-16 13:56:24 +01:00
Jonah Palmer
c255488d67 virtio: add vhost support for virtio devices
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.

Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.

Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
Jonah Palmer
3857cd5c7f virtio: drop name parameter for virtio_init()
This patch drops the name parameter for the virtio_init function.

The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.

This patch lets us do this and removes the need for the name
parameter in the virtio_init function.

Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
Alex Bennée
503e355465 virtio/vhost-user: dynamically assign VhostUserHostNotifiers
At a couple of hundred bytes per notifier allocating one for every
potential queue is very wasteful as most devices only have a few
queues. Instead of having this handled statically dynamically assign
them and track in a GPtrArray.

[AJB: it's hard to trigger the vhost notifiers code, I assume as it
requires a KVM guest with appropriate backend]

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-14-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
Alex Bennée
56534930b5 hw/virtio/vhost-user: don't suppress F_CONFIG when supported
Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
the vhost_dev_config_notifier. However this isn't the only way we can
handle config messages, the existing vdc->get/set_config can do this
as well.

Lightly re-factor the code to check for both potential methods and
instead of silently squashing the feature error out. It is unlikely
that a vhost-user backend expecting to handle CONFIG messages will
behave correctly if they never get sent.

Fixes: 1c3e5a2617 ("vhost-user: back SET/GET_CONFIG requests with a protocol feature")
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20220321153037.3622127-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
Alex Bennée
6ca6d8ee9d hw/virtio: add vhost_user_[read|write] trace points
These are useful when trying to debug the initial vhost-user
negotiation, especially when it hard to get logging from the low level
library on the other side.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20220321153037.3622127-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-05-16 04:38:40 -04:00
Alex Bennée
31cc62bb5b virtio-pci: add notification trace points
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200925125147.26943-6-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-3-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
Alex Bennée
e1b1f5341a hw/virtio: move virtio-pci.h into shared include space
This allows other device classes that will be exposed via PCI to be
able to do so in the appropriate hw/ directory. I resisted the
temptation to re-order headers to be more aesthetically pleasing.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200925125147.26943-4-alex.bennee@linaro.org>

Message-Id: <20220321153037.3622127-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
Ilya Maximets
1eed051c8c vhost_net: Print feature masks in hex
"0x200000000" is much more readable than "8589934592".
The change saves one step (conversion) while debugging.

Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20220318140440.596019-1-i.maximets@ovn.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-05-16 04:38:40 -04:00
Jason Wang
147a372e75 intel-iommu: update iq_dw during post load
We need to update iq_dw according to the DMA_IRQ_REG during post
load. Otherwise we may get wrong IOTLB invalidation descriptor after
migration.

Fixes: fb43cf739e ("intel_iommu: scalable mode emulation")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220317080522.14621-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2022-05-16 04:38:40 -04:00
Jason Wang
ceb058955a intel-iommu: update root_scalable before switching as during post_load
We need check whether passthrough is enabled during
vtd_switch_address_space() by checking the context entries. This
requires the root_scalable to be set correctly otherwise we may try to
check legacy rsvd bits instead of scalable ones.

Fixing this by updating root_scalable before switching the address
spaces during post_load.

Fixes: fb43cf739e ("intel_iommu: scalable mode emulation")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220317080522.14621-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2022-05-16 04:38:40 -04:00
Jason Wang
ea97a1bde7 intel-iommu: block output address in interrupt address range
According to vtd spec v3.3 3.14:

"""
Software must not program paging-structure entries to remap any
address to the interrupt address range. Untranslated requests and
translation requests that result in an address in the interrupt range
will be blocked with condition code LGN.4 or SGN.8.
"""

This patch blocks the request that result in interrupt address range.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220210092815.45174-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2022-05-16 04:38:40 -04:00
Jason Wang
a48a5bcd64 intel-iommu: remove VTD_FR_RESERVED_ERR
This fault reason is not used and is duplicated with SPT.2 condition
code. So let's remove it.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220210092815.45174-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2022-05-16 04:38:40 -04:00
David Woodhouse
77250171bd intel_iommu: Fix irqchip / X2APIC configuration checks
We don't need to check kvm_enable_x2apic(). It's perfectly OK to support
interrupt remapping even if we can't address CPUs above 254. Kind of
pointless, but still functional.

The check on kvm_enable_x2apic() needs to happen *anyway* in order to
allow CPUs above 254 even without an IOMMU, so allow that to happen
elsewhere.

However, we do require the *split* irqchip in order to rewrite I/OAPIC
destinations. So fix that check while we're here.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20220314142544.150555-4-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
David Woodhouse
175f3a5986 intel_iommu: Only allow interrupt remapping to be enabled if it's supported
We should probably check if we were meant to be exposing IR, before
letting the guest turn the IRE bit on.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220314142544.150555-3-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
David Woodhouse
8646d9c773 intel_iommu: Support IR-only mode without DMA translation
By setting none of the SAGAW bits we can indicate to a guest that DMA
translation isn't supported. Tested by booting Windows 10, as well as
Linux guests with the fix at https://git.kernel.org/torvalds/c/c40aaaac10

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220314142544.150555-2-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:39 -04:00
David Woodhouse
dc89f32d92 target/i386: Fix sanity check on max APIC ID / X2APIC enablement
The check on x86ms->apic_id_limit in pc_machine_done() had two problems.

Firstly, we need KVM to support the X2APIC API in order to allow IRQ
delivery to APICs >= 255. So we need to call/check kvm_enable_x2apic(),
which was done elsewhere in *some* cases but not all.

Secondly, microvm needs the same check. So move it from pc_machine_done()
to x86_cpus_init() where it will work for both.

The check in kvm_cpu_instance_init() is now redundant and can be dropped.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20220314142544.150555-1-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:39 -04:00
Richard Henderson
10c2a0c5e7 OpenRISC Fixes for 7.0
- A few or1ksim fixes and enhancements
  - A fix for OpenRISC tcg backend around delay slot handling
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmKAWKsACgkQw7McLV5m
 J+SoFg/8Dlrc2BqjjXw9gpaQ18+3BRI6dMVPqHA22VJks88gykH7UWLUbrCxtKnS
 SBcIcpzu17nKDdfwYWndqCr0UBM/zM3JzFrTv4QEhTEg6Np7lSM2KVNEhjBPVGoW
 A7QOjPFrwItWOfAx6hrcczpj+L50iKuWeMW0XnEfqSeDYisxZcSp2yMoe5h3y7bF
 tlpo+ha/ir/fd2kMlFrQlPWYiWkWM05RLJJOlXhdRMF7hrW5qlHqEB/SVykUTf7V
 6fqOFvY6r3vE5OFm0Scgf/k2AJIxwV8qXkBJ5/egv+ZqUidZBQ9nXtOw++vF2AWp
 eKoU2/c2XIxiF1Xdpgdi6a/CxlLqrr9jraQROB3GpaL9zGQvd//wUCg0F+QLicLv
 avq4lvNmnat89aXj1DQ+DWpLy0zaZFGmxsPR+KeBJ2wkuEJ3Vd4+uiuAyXnm9M8D
 wEE8mgFQYsTL1WlgHF4uNTDIx8OLS+4gYlBE3tffRksxyLLwzKHHgAfLdNZvhfx8
 QZBuPy+yyO8zjr3RUVUArBs/ukZHP1QwDE6uxmPKV34tvVEbFVeSFY3a1LmYV3w5
 mZNALNqf+h5Dq5Qo7f7cGNMrzhL53GTWPNX0MK5+SBDZF3/fpPZyvCr4Zd69Z5tD
 +YClfWBv8HPjdUf+IFHqyE8rURw/sgNvgB76GpalwcUYXRr7zTM=
 =tmP4
 -----END PGP SIGNATURE-----

Merge tag 'or1k-pull-request-20220515' of https://github.com/stffrdhrn/qemu into staging

OpenRISC Fixes for 7.0

 - A few or1ksim fixes and enhancements
 - A fix for OpenRISC tcg backend around delay slot handling

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmKAWKsACgkQw7McLV5m
# J+SoFg/8Dlrc2BqjjXw9gpaQ18+3BRI6dMVPqHA22VJks88gykH7UWLUbrCxtKnS
# SBcIcpzu17nKDdfwYWndqCr0UBM/zM3JzFrTv4QEhTEg6Np7lSM2KVNEhjBPVGoW
# A7QOjPFrwItWOfAx6hrcczpj+L50iKuWeMW0XnEfqSeDYisxZcSp2yMoe5h3y7bF
# tlpo+ha/ir/fd2kMlFrQlPWYiWkWM05RLJJOlXhdRMF7hrW5qlHqEB/SVykUTf7V
# 6fqOFvY6r3vE5OFm0Scgf/k2AJIxwV8qXkBJ5/egv+ZqUidZBQ9nXtOw++vF2AWp
# eKoU2/c2XIxiF1Xdpgdi6a/CxlLqrr9jraQROB3GpaL9zGQvd//wUCg0F+QLicLv
# avq4lvNmnat89aXj1DQ+DWpLy0zaZFGmxsPR+KeBJ2wkuEJ3Vd4+uiuAyXnm9M8D
# wEE8mgFQYsTL1WlgHF4uNTDIx8OLS+4gYlBE3tffRksxyLLwzKHHgAfLdNZvhfx8
# QZBuPy+yyO8zjr3RUVUArBs/ukZHP1QwDE6uxmPKV34tvVEbFVeSFY3a1LmYV3w5
# mZNALNqf+h5Dq5Qo7f7cGNMrzhL53GTWPNX0MK5+SBDZF3/fpPZyvCr4Zd69Z5tD
# +YClfWBv8HPjdUf+IFHqyE8rURw/sgNvgB76GpalwcUYXRr7zTM=
# =tmP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 14 May 2022 06:34:35 PM PDT
# gpg:                using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25  EFF1 C3B3 1C2D 5E66 27E4

* tag 'or1k-pull-request-20220515' of https://github.com/stffrdhrn/qemu:
  target/openrisc: Do not reset delay slot flag on early tb exit
  hw/openrisc: use right OMPIC size variable
  hw/openrisc: support 4 serial ports in or1ksim
  hw/openrisc: page-align FDT address

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-15 16:56:27 -07:00
Jason A. Donenfeld
a92162f4f1 hw/openrisc: use right OMPIC size variable
This appears to be a copy and paste error. The UART size was used
instead of the much smaller OMPIC size. But actually that smaller OMPIC
size is wrong too and doesn't allow the IPI to work in Linux. So set it
to the old value.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[smh:Updated OR1KSIM_OMPIC size to use OR1KSIM_CPUS_MAX]
Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-15 10:33:01 +09:00
Jason A. Donenfeld
777784bda4 hw/openrisc: support 4 serial ports in or1ksim
The 8250 serial controller supports 4 serial ports, so wire them all up,
so that we can have more than one basic I/O channel.

Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[smh:Fixup indentation and lines over 80 chars]
Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-15 10:31:46 +09:00
Paolo Bonzini
039a68373c introduce -audio as a replacement for -soundhw
-audio is used like "-audio pa,model=sb16".  It is almost as simple as
-soundhw, but it reuses the -audiodev parsing machinery and attaches an
audiodev to the newly-created device.  The main 'feature' is that
it knows about adding the codec device for model=intel-hda, and adding
the audiodev to the codec device.

In the future, it could be extended to support default models or
builtin devices, just like -nic, or even a default backend.  For now,
keep it simple.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-14 12:33:44 +02:00
Paolo Bonzini
67aaa96ae4 soundhw: move help handling to vl.c
This will allow processing "-audio model=help" even if the backend
part of the option is missing.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-14 12:33:44 +02:00
Paolo Bonzini
bf521c5655 soundhw: unify initialization for ISA and PCI soundhw
Use qdev_new instead of distinguishing isa_create_simple/pci_create_simple.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-14 12:33:44 +02:00
Paolo Bonzini
eef5fdf3d5 soundhw: extract soundhw help to a separate function
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-14 12:33:44 +02:00
Paolo Bonzini
9c50b8aae2 soundhw: remove ability to create multiple soundcards
The usefulness of enabling a dozen soundcards is dubious.  Simplify the
code by allowing a single instance of -soundhw, with no support for
parsing either comma-separated values or 'soundhw all'.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-14 12:33:44 +02:00
Yang Weijiang
18c22d7112 qdev-properties: Add a new macro with bitmask check for uint64_t property
The DEFINE_PROP_UINT64_CHECKMASK maro applies certain mask check agaist
user-supplied property value, reject the value if it violates the bitmask.

Co-developed-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220215195258.29149-2-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-14 12:32:41 +02:00
Alex Williamson
e4082063e4 linux-headers: Update to v5.18-rc6
Update to c5eb0a61238d ("Linux 5.18-rc6").  Mechanical search and
replace of vfio defines with white space massaging.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-13 08:20:11 -06:00
Eugenio Pérez
5181db132b vhost: Fix element in vhost_svq_add failure
Coverity rightly reports that is not free in that case.

Fixes: Coverity CID 1487559
Fixes: 100890f7ca ("vhost: Shadow virtqueue buffers forwarding")

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220512175747.142058-7-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Philippe Mathieu-Daudé
d792199de5 hw/virtio: Replace g_memdup() by g_memdup2()
Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2() wrapper.

Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20220512175747.142058-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Eugenio Pérez
1c82fdfef8 vdpa: Fix index calculus at vhost_vdpa_svqs_start
With the introduction of MQ the index of the vq needs to be calculated
with the device model vq_index.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220512175747.142058-5-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Eugenio Pérez
639036477e vdpa: Fix bad index calculus at vhost_vdpa_get_vring_base
Fixes: 6d0b222666 ("vdpa: Adapt vhost_vdpa_get_vring_base to SVQ")

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220512175747.142058-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Eugenio Pérez
81abfa5724 vhost: Fix device's used descriptor dequeue
Only the first one of them were properly enqueued back.

Fixes: 100890f7ca ("vhost: Shadow virtqueue buffers forwarding")

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220512175747.142058-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Eugenio Pérez
495fe3a787 vhost: Track descriptor chain in private at SVQ
The device could have access to modify them, and it definitely have
access when we implement packed vq. Harden SVQ maintaining a private
copy of the descriptor chain. Other fields like buffer addresses are
already maintained sepparatedly.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220512175747.142058-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Jonathan Cameron
6d302cf46d i386/pc: Enable CXL fixed memory windows
Add the CFMWs memory regions to the memorymap and adjust the
PCI window to avoid hitting the same memory.

Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20220429144110.25167-36-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Ben Widawsky
3540bf56e4 hw/cxl/component Add a dumb HDM decoder handler
Add a trivial handler for now to cover the root bridge
where we could do some error checking in future.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-35-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Jonathan Cameron
eb19d9079e cxl/cxl-host: Add memops for CFMWS region.
These memops perform interleave decoding, walking down the
CXL topology from CFMWS described host interleave
decoder via CXL host bridge HDM decoders, through the CXL
root ports and finally call CXL type 3 specific read and write
functions.

Note that, whilst functional the current implementation does
not support:
* switches
* multiple HDM decoders at a given level.
* unaligned accesses across the interleave boundaries

Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20220429144110.25167-34-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Jonathan Cameron
5fcc499ee3 mem/cxl_type3: Add read and write functions for associated hostmem.
Once a read or write reaches a CXL type 3 device, the HDM decoders
on the device are used to establish the Device Physical Address
which should be accessed.  These functions peform the required maths
and then use a device specific address space to access the
hostmem->mr to fullfil the actual operation.  Note that failed writes
are silent, but failed reads return poison.  Note this is based
loosely on:

https://lore.kernel.org/qemu-devel/20200817161853.593247-6-f4bug@amsat.org/
[RFC PATCH 0/9] hw/misc: Add support for interleaved memory accesses

Only lightly tested so far.  More complex test cases yet to be written.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-33-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Jonathan Cameron
0b4aec2469 CXL/cxl_component: Add cxl_get_hb_cstate()
Accessor to get hold of the cxl state for a CXL host bridge
without exposing the internals of the implementation.

Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-32-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Jonathan Cameron
aa970ed586 pci/pcie_port: Add pci_find_port_by_pn()
Simple function to search a PCIBus to find a port by
it's port number.

CXL interleave decoding uses the port number as a target
so it is necessary to locate the port when doing interleave
decoding.

Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-31-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Jonathan Cameron
fc1e01e009 hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl
This adds code to instantiate the slightly extended ACPI root port
description in DSDT as per the CXL 2.0 specification.

Basically a cut and paste job from the i386/pc code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-30-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Ben Widawsky
21df6ab97f acpi/cxl: Introduce CFMWS structures in CEDT
The CEDT CXL Fixed Window Memory Window Structures (CFMWs)
define regions of the host phyiscal address map which
(via an impdef means) are configured such that they have
a particular interleave setup across one or more CXL Host Bridges.

Reported-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-29-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Jonathan Cameron
aadfe32091 hw/cxl/host: Add support for CXL Fixed Memory Windows.
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.

For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.

ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k

Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
  the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.

When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question.  If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.

A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
   up it's PA memory map.  We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
   but these links cannot be established until command line devices have
   been added.

Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.

[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)

Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 07:57:26 -04:00
Jonathan Cameron
829de299d1 hw/cxl/component: Add utils for interleave parameter encoding/decoding
Both registers and the CFMWS entries in CDAT use simple encodings
for the number of interleave ways and the interleave granularity.
Introduce simple conversion functions to/from the unencoded
number / size.  So far the iw decode has not been needed so is
it not implemented.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-27-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
3d6a69b6eb acpi/cxl: Create the CEDT (9.14.1)
The CXL Early Discovery Table is defined in the CXL 2.0 specification as
a way for the OS to get CXL specific information from the system
firmware.

CXL 2.0 specification adds an _HID, ACPI0016, for CXL capable host
bridges, with a _CID of PNP0A08 (PCIe host bridge). CXL aware software
is able to use this initiate the proper _OSC method, and get the _UID
which is referenced by the CEDT. Therefore the existence of an ACPI0016
device allows a CXL aware driver perform the necessary actions. For a
CXL capable OS, this works. For a CXL unaware OS, this works.

CEDT awaremess requires more. The motivation for ACPI0017 is to provide
the possibility of having a Linux CXL module that can work on a legacy
Linux kernel. Linux core PCI/ACPI which won't be built as a module,
will see the _CID of PNP0A08 and bind a driver to it. If we later loaded
a driver for ACPI0016, Linux won't be able to bind it to the hardware
because it has already bound the PNP0A08 driver. The ACPI0017 device is
an opportunity to have an object to bind a driver will be used by a
Linux driver to walk the CXL topology and do everything that we would
have preferred to do with ACPI0016.

There is another motivation for an ACPI0017 device which isn't
implemented here. An operating system needs an attach point for a
non-volatile region provider that understands cross-hostbridge
interleaving. Since QEMU emulation doesn't support interleaving yet,
this is more important on the OS side, for now.

As of CXL 2.0 spec, only 1 sub structure is defined, the CXL Host Bridge
Structure (CHBS) which is primarily useful for telling the OS exactly
where the MMIO for the host bridge is.

Link: https://lore.kernel.org/linux-cxl/20210115034911.nkgpzc756d6qmjpl@intel.com/T/#t
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-26-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
2a3282c68e acpi/cxl: Add _OSC implementation (9.14.2)
CXL 2.0 specification adds 2 new dwords to the existing _OSC definition
from PCIe. The new dwords are accessed with a new uuid. This
implementation supports what is in the specification.

iasl -d decodes the result of this patch as:

Name (SUPP, Zero)
Name (CTRL, Zero)
Name (SUPC, Zero)
Name (CTRC, Zero)
Method (_OSC, 4, NotSerialized)  // _OSC: Operating System Capabilities
{
    CreateDWordField (Arg3, Zero, CDW1)
    If (((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */) || (Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */)))
    {
        CreateDWordField (Arg3, 0x04, CDW2)
        CreateDWordField (Arg3, 0x08, CDW3)
        Local0 = CDW3 /* \_SB_.PC0C._OSC.CDW3 */
        Local0 &= 0x1F
        If ((Arg1 != One))
        {
            CDW1 |= 0x08
        }

        If ((CDW3 != Local0))
        {
            CDW1 |= 0x10
        }

        SUPP = CDW2 /* \_SB_.PC0C._OSC.CDW2 */
        CTRL = CDW3 /* \_SB_.PC0C._OSC.CDW3 */
        CDW3 = Local0
        If ((Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */))
        {
            CreateDWordField (Arg3, 0x0C, CDW4)
            CreateDWordField (Arg3, 0x10, CDW5)
            SUPC = CDW4 /* \_SB_.PC0C._OSC.CDW4 */
            CTRC = CDW5 /* \_SB_.PC0C._OSC.CDW5 */
            CDW5 |= One
        }

        Return (Arg3)
    }
    Else
    {
        CDW1 |= 0x04
        Return (Arg3)
    }

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-25-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
6e4e3ae936 hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142)
CXL host bridges themselves may have MMIO. Since host bridges don't have
a BAR they are treated as special for MMIO.  This patch includes
i386/pc support.
Also hook up the device reset now that we have have the MMIO
space in which the results are visible.

Note that we duplicate the PCI express case for the aml_build but
the implementations will diverge when the CXL specific _OSC is
introduced.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-24-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
3ebe676a34 hw/cxl/device: Implement get/set Label Storage Area (LSA)
Implement get and set handlers for the Label Storage Area
used to hold data describing persistent memory configuration
so that it can be ensured it is seen in the same configuration
after reboot.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-22-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
639daf8e93 hw/cxl/device: Plumb real Label Storage Area (LSA) sizing
This should introduce no change. Subsequent work will make use of this
new class member.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-21-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
092c6b11f2 hw/cxl/device: Add some trivial commands
GET_FW_INFO and GET_PARTITION_INFO, for this emulation, is equivalent to
info already returned in the IDENTIFY command. To have a more robust
implementation, add those.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-20-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
947515fc42 hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12)
A device's volatile and persistent memory are known Host Defined Memory
(HDM) regions. The mechanism by which the device is programmed to claim
the addresses associated with those regions is through dedicated logic
known as the HDM decoder. In order to allow the OS to properly program
the HDMs, the HDM decoders must be modeled.

There are two ways the HDM decoders can be implemented, the legacy
mechanism is through the PCIe DVSEC programming from CXL 1.1 (8.1.3.8),
and MMIO is found in 8.2.5.12 of the spec. For now, 8.1.3.8 is not
implemented.

Much of CXL device logic is implemented in cxl-utils. The HDM decoder
however is implemented directly by the device implementation.
Whilst the implementation currently does no validity checks on the
encoder set up, future work will add sanity checking specific to
the type of cxl component.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-19-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
e1706ea83d hw/cxl/device: Add a memory device (8.2.8.5)
A CXL memory device (AKA Type 3) is a CXL component that contains some
combination of volatile and persistent memory. It also implements the
previously defined mailbox interface as well as the memory device
firmware interface.

Although the memory device is configured like a normal PCIe device, the
memory traffic is on an entirely separate bus conceptually (using the
same physical wires as PCIe, but different protocol).

Once the CXL topology is fully configure and address decoders committed,
the guest physical address for the memory device is part of a larger
window which is owned by the platform.  The creation of these windows
is later in this series.

The following example will create a 256M device in a 512M window:
-object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M"
-device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0"

Note: Dropped PCDIMM info interfaces for now.  They can be added if
appropriate at a later date.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-18-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
d86d30192b hw/cxl/rp: Add a root port
This adds just enough of a root port implementation to be able to
enumerate root ports (creating the required DVSEC entries). What's not
here yet is the MMIO nor the ability to write some of the DVSEC entries.

This can be added with the qemu commandline by adding a rootport to a
specific CXL host bridge. For example:
  -device cxl-rp,id=rp0,bus="cxl.0",addr=0.0,chassis=4

Like the host bridge patch, the ACPI tables aren't generated at this
point and so system software cannot use it.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-17-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
4f8db8711c hw/pxb: Allow creation of a CXL PXB (host bridge)
This works like adding a typical pxb device, except the name is
'pxb-cxl' instead of 'pxb-pcie'. An example command line would be as
follows:
  -device pxb-cxl,id=cxl.0,bus="pcie.0",bus_nr=1

A CXL PXB is backward compatible with PCIe. What this means in practice
is that an operating system that is unaware of CXL should still be able
to enumerate this topology as if it were PCIe.

One can create multiple CXL PXB host bridges, but a host bridge can only
be connected to the main root bus. Host bridges cannot appear elsewhere
in the topology.

Note that as of this patch, the ACPI tables needed for the host bridge
(specifically, an ACPI object in _SB named ACPI0016 and the CEDT) aren't
created. So while this patch internally creates it, it cannot be
properly used by an operating system or other system software.

Also necessary is to add an exception to scripts/device-crash-test
similar to that for exiting pxb as both must created on a PCIexpress
host bus.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan.Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-15-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Jonathan Cameron
abb3009baf cxl: Machine level control on whether CXL support is enabled
There are going to be some potential overheads to CXL enablement,
for example the host bridge region reserved in memory maps.
Add a machine level control so that CXL is disabled by default.

Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-14-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
9dccb1216b hw/pci/cxl: Create a CXL bus type
The easiest way to differentiate a CXL bus, and a PCIE bus is using a
flag. A CXL bus, in hardware, is backward compatible with PCIE, and
therefore the code tries pretty hard to keep them in sync as much as
possible.

The other way to implement this would be to try to cast the bus to the
correct type. This is less code and useful for debugging via simply
looking at the flags.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-13-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
25a2e524e3 hw/pxb: Use a type for realizing expanders
This opens up the possibility for more types of expanders (other than
PCI and PCIe). We'll need this to create a CXL expander.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-12-Jonathan.Cameron@huawei.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
056172691b hw/cxl/device: Add log commands (8.2.9.4) + CEL
CXL specification provides for the ability to obtain logs from the
device. Logs are either spec defined, like the "Command Effects Log"
(CEL), or vendor specific. UUIDs are defined for all log types.

The CEL is a mechanism to provide information to the host about which
commands are supported. It is useful both to determine which spec'd
optional commands are supported, as well as provide a list of vendor
specified commands that might be used. The CEL is already created as
part of mailbox initialization, but here it is now exported to hosts
that use these log commands.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-11-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
557a79c83e hw/cxl/device: Timestamp implementation (8.2.9.3)
Errata F4 to CXL 2.0 clarified the meaning of the timer as the
sum of the value set with the timestamp set command and the number
of nano seconds since it was last set.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
57c02b355f hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1)
Using the previously implemented stubbed helpers, it is now possible to
easily add the missing, required commands to the implementation.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
ce3b4e5c15 hw/cxl/device: Add memory device utilities
Memory devices implement extra capabilities on top of CXL devices. This
adds support for that.

A large part of memory devices is the mailbox/command interface. All of
the mailbox handling is done in the mailbox-utils library. Longer term,
new CXL devices that are being emulated may want to handle commands
differently, and therefore would need a mechanism to opt in/out of the
specific generic handlers. As such, this is considered sufficient for
now, but may need more depth in the future.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
464e14ac43 hw/cxl/device: Implement basic mailbox (8.2.8.4)
This is the beginning of implementing mailbox support for CXL 2.0
devices. The implementation recognizes when the doorbell is rung,
handles the command/payload, clears the doorbell while returning error
codes and data.

Generally the mailbox mechanism is designed to permit communication
between the host OS and the firmware running on the device. For our
purposes, we emulate both the firmware, implemented primarily in
cxl-mailbox-utils.c, and the hardware.

No commands are implemented yet.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
6364adacdf hw/cxl/device: Implement the CAP array (8.2.8.1-2)
This implements all device MMIO up to the first capability. That
includes the CXL Device Capabilities Array Register, as well as all of
the CXL Device Capability Header Registers. The latter are filled in as
they are implemented in the following patches.

Endianness and alignment are managed by softmmu memory core.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:36 -04:00
Ben Widawsky
9e58f52d3f hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5)
A CXL 2.0 component is any entity in the CXL topology. All components
have a analogous function in PCIe. Except for the CXL host bridge, all
have a PCIe config space that is accessible via the common PCIe
mechanisms. CXL components are enumerated via DVSEC fields in the
extended PCIe header space. CXL components will minimally implement some
subset of CXL.mem and CXL.cache registers defined in 8.2.5 of the CXL
2.0 specification. Two headers and a utility library are introduced to
support the minimum functionality needed to enumerate components.

The cxl_pci header manages bits associated with PCI, specifically the
DVSEC and related fields. The cxl_component.h variant has data
structures and APIs that are useful for drivers implementing any of the
CXL 2.0 components. The library takes care of making use of the DVSEC
bits and the CXL.[mem|cache] registers. Per spec, the registers are
little endian.

None of the mechanisms required to enumerate a CXL capable hostbridge
are introduced at this point.

Note that the CXL.mem and CXL.cache registers used are always 4B wide.
It's possible in the future that this constraint will not hold.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Message-Id: <20220429144110.25167-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:35 -04:00
Ben Widawsky
cf04aba2a9 hw/pci/cxl: Add a CXL component type (interface)
A CXL component is a hardware entity that implements CXL component
registers from the CXL 2.0 spec (8.2.3). Currently these represent 3
general types.
1. Host Bridge
2. Ports (root, upstream, downstream)
3. Devices (memory, other)

A CXL component can be conceptually thought of as a PCIe device with
extra functionality when enumerated and enabled. For this reason, CXL
does here, and will continue to add on to existing PCI code paths.

Host bridges will typically need to be handled specially and so they can
implement this newly introduced interface or not. All other components
should implement this interface. Implementing this interface allows the
core PCI code to treat these devices as special where appropriate.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Message-Id: <20220429144110.25167-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13 06:13:35 -04:00
Jason Wang
250227f4fa intel-iommu: correct the value used for error_setg_errno()
error_setg_errno() expects a normal errno value, not a negated
one, so we should use ENOTSUP instead of -ENOSUP.

Fixes: Coverity CID 1487174
Fixes: ("intel_iommu: support snoop control")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220401022824.9337-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
2022-05-13 05:22:31 -04:00
Halil Pasic
06134e2bc3 virtio: fix feature negotiation for ACCESS_PLATFORM
Unlike most virtio features ACCESS_PLATFORM is considered mandatory by
QEMU, i.e. the driver must accept it if offered by the device. The
virtio specification says that the driver SHOULD accept the
ACCESS_PLATFORM feature if offered, and that the device MAY fail to
operate if ACCESS_PLATFORM was offered but not negotiated.

While a SHOULD ain't exactly a MUST, we are certainly allowed to fail
the device when the driver fences ACCESS_PLATFORM. With commit
2943b53f68 ("virtio: force VIRTIO_F_IOMMU_PLATFORM") we already made the
decision to do so whenever the get_dma_as() callback is implemented (by
the bus), which in practice means for the entirety of virtio-pci.

That means, if the device needs to translate I/O addresses, then
ACCESS_PLATFORM is mandatory. The aforementioned commit tells us in the
commit message that this is for security reasons. More precisely if we
were to allow a less then trusted driver (e.g. an user-space driver, or
a nested guest) to make the device bypass the IOMMU by not negotiating
ACCESS_PLATFORM, then the guest kernel would have no ability to
control/police (by programming the IOMMU) what pieces of guest memory
the driver may manipulate using the device. Which would break security
assumptions within the guest.

If ACCESS_PLATFORM is offered not because we want the device to utilize
an IOMMU and do address translation, but because the device does not
have access to the entire guest RAM, and needs the driver to grant
access to the bits it needs access to (e.g. confidential guest support),
we still require the guest to have the corresponding logic and to accept
ACCESS_PLATFORM. If the driver does not accept ACCESS_PLATFORM, then
things are bound to go wrong, and we may see failures much less graceful
than failing the device because the driver didn't negotiate
ACCESS_PLATFORM.

So let us make ACCESS_PLATFORM mandatory for the driver regardless
of whether the get_dma_as() callback is implemented or not.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 2943b53f68 ("virtio: force VIRTIO_F_IOMMU_PLATFORM")

Message-Id: <20220307112939.2780117-1-pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2022-05-13 05:22:31 -04:00
Richard Henderson
9de5f2b408 * small cleanups for pc-bios/optionrom Makefiles
* checkpatch: fix g_malloc check
 * fix mremap() and RDMA detection
 * confine igd-passthrough-isa-bridge to Xen-enabled builds
 * cover PCI in arm-virt machine qtests
 * add -M boot and -M mem compound properties
 * bump SLIRP submodule
 * support CFI with system libslirp (>= 4.7)
 * clean up CoQueue wakeup functions
 * fix vhost-vsock regression
 * fix --disable-vnc compilation
 * other minor bugfixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ8/KMUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTTAf9Et1C8iZn+OlZi99wMEeMy8a4mIE5
 CpkBpFphhkBvt3AH7XNsCyL4Gea4QgsI7nOIEVUwvW7gPf85PiBUX8mjrIVg3x1k
 bmMEwMKSTYPmDieAnYBP9zCqZQXNYP8L8WxVs2jFY2GXZ2ZogODYFbvCY4yEEB72
 UR6uIvQRdpiB6BEj8UZ+5i+sDtb0zxqrjzUz8T/PJC9/2JSNgi+sAWWQoQT3PPU7
 R7z2nmEa1VeVLPP6mUHvJKhBltVXF+LyIjQHvo+Tp9tSqp9JwXfFBNQ5W/MFes2D
 skF47N7PdgKRH9Dp4r0j+MqBwoAq86+ao+MKsbQ1Gb91HhoCWt/MrVrVyg==
 =1E6P
 -----END PGP SIGNATURE-----

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* small cleanups for pc-bios/optionrom Makefiles
* checkpatch: fix g_malloc check
* fix mremap() and RDMA detection
* confine igd-passthrough-isa-bridge to Xen-enabled builds
* cover PCI in arm-virt machine qtests
* add -M boot and -M mem compound properties
* bump SLIRP submodule
* support CFI with system libslirp (>= 4.7)
* clean up CoQueue wakeup functions
* fix vhost-vsock regression
* fix --disable-vnc compilation
* other minor bugfixes

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ8/KMUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTTAf9Et1C8iZn+OlZi99wMEeMy8a4mIE5
# CpkBpFphhkBvt3AH7XNsCyL4Gea4QgsI7nOIEVUwvW7gPf85PiBUX8mjrIVg3x1k
# bmMEwMKSTYPmDieAnYBP9zCqZQXNYP8L8WxVs2jFY2GXZ2ZogODYFbvCY4yEEB72
# UR6uIvQRdpiB6BEj8UZ+5i+sDtb0zxqrjzUz8T/PJC9/2JSNgi+sAWWQoQT3PPU7
# R7z2nmEa1VeVLPP6mUHvJKhBltVXF+LyIjQHvo+Tp9tSqp9JwXfFBNQ5W/MFes2D
# skF47N7PdgKRH9Dp4r0j+MqBwoAq86+ao+MKsbQ1Gb91HhoCWt/MrVrVyg==
# =1E6P
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 12 May 2022 05:25:07 AM PDT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (27 commits)
  vmxcap: add tertiary execution controls
  vl: make machine type deprecation a warning
  meson: link libpng independent of vnc
  vhost-backend: do not depend on CONFIG_VHOST_VSOCK
  coroutine-lock: qemu_co_queue_restart_all is a coroutine-only qemu_co_enter_all
  coroutine-lock: introduce qemu_co_queue_enter_all
  coroutine-lock: qemu_co_queue_next is a coroutine-only qemu_co_enter_next
  net: slirp: allow CFI with libslirp >= 4.7
  net: slirp: add support for CFI-friendly timer API
  net: slirp: switch to slirp_new
  net: slirp: introduce a wrapper struct for QemuTimer
  slirp: bump submodule past 4.7 release
  machine: move more memory validation to Machine object
  machine: make memory-backend a link property
  machine: add mem compound property
  machine: add boot compound property
  machine: use QAPI struct for boot configuration
  tests/qtest/libqos: Add generic pci host bridge in arm-virt machine
  tests/qtest/libqos: Skip hotplug tests if pci root bus is not hotpluggable
  tests/qtest/libqos/pci: Introduce pio_limit
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-12 10:52:15 -07:00
Philippe Mathieu-Daudé
defac5e2fb hw/block/fdc: Prevent end-of-track overrun (CVE-2021-3507)
Per the 82078 datasheet, if the end-of-track (EOT byte in
the FIFO) is more than the number of sectors per side, the
command is terminated unsuccessfully:

* 5.2.5 DATA TRANSFER TERMINATION

  The 82078 supports terminal count explicitly through
  the TC pin and implicitly through the underrun/over-
  run and end-of-track (EOT) functions. For full sector
  transfers, the EOT parameter can define the last
  sector to be transferred in a single or multisector
  transfer. If the last sector to be transferred is a par-
  tial sector, the host can stop transferring the data in
  mid-sector, and the 82078 will continue to complete
  the sector as if a hardware TC was received. The
  only difference between these implicit functions and
  TC is that they return "abnormal termination" result
  status. Such status indications can be ignored if they
  were expected.

* 6.1.3 READ TRACK

  This command terminates when the EOT specified
  number of sectors have been read. If the 82078
  does not find an I D Address Mark on the diskette
  after the second· occurrence of a pulse on the
  INDX# pin, then it sets the IC code in Status Regis-
  ter 0 to "01" (Abnormal termination), sets the MA bit
  in Status Register 1 to "1", and terminates the com-
  mand.

* 6.1.6 VERIFY

  Refer to Table 6-6 and Table 6-7 for information
  concerning the values of MT and EC versus SC and
  EOT value.

* Table 6·6. Result Phase Table

* Table 6-7. Verify Command Result Phase Table

Fix by aborting the transfer when EOT > # Sectors Per Side.

Cc: qemu-stable@nongnu.org
Cc: Hervé Poussineau <hpoussin@reactos.org>
Fixes: baca51faff ("floppy driver: disk geometry auto detect")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/339
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211118115733.4038610-2-philmd@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-05-12 12:31:08 +02:00
Paolo Bonzini
d93e839ccd vhost-backend: do not depend on CONFIG_VHOST_VSOCK
The vsock callbacks .vhost_vsock_set_guest_cid and
.vhost_vsock_set_running are the only ones to be conditional
on #ifdef CONFIG_VHOST_VSOCK.  This is different from any other
device-dependent callbacks like .vhost_scsi_set_endpoint, and it
also broke when CONFIG_VHOST_VSOCK was changed to a per-target
symbol.

It would be possible to also use the CONFIG_DEVICES include, but
really there is no reason for most virtio files to be per-target
so just remove the #ifdef to fix the issue.

Reported-by: Dov Murik <dovmurik@linux.ibm.com>
Fixes: 9972ae314f ("build: move vhost-vsock configuration to Kconfig")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12 12:29:44 +02:00
Paolo Bonzini
fb56b7a052 machine: move more memory validation to Machine object
This allows setting memory properties without going through
vl.c, and have them validated just the same.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12 12:29:44 +02:00
Paolo Bonzini
26f88d84da machine: make memory-backend a link property
Handle HostMemoryBackend creation and setting of ms->ram entirely in
machine_run_board_init.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12 12:29:44 +02:00
Paolo Bonzini
ce9d03fb3f machine: add mem compound property
Make -m syntactic sugar for a compound property "-machine
mem.{size,max-size,slots}".  The new property does not have
the magic conversion to megabytes of unsuffixed arguments,
and also does not understand that "0" means the default size
(you have to leave it out to get the default).  This means
that we need to convert the QemuOpts by hand to a QDict.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12 12:29:44 +02:00
Paolo Bonzini
8c4da4b521 machine: add boot compound property
Make -boot syntactic sugar for a compound property "-machine boot.{order,menu,...}".
machine_boot_parse is replaced by the setter for the property.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12 12:29:43 +02:00
Paolo Bonzini
97ec4d21e0 machine: use QAPI struct for boot configuration
As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12 12:29:43 +02:00
Kevin Wolf
98e3ab3505 coroutine: Rename qemu_coroutine_inc/dec_pool_size()
It's true that these functions currently affect the batch size in which
coroutines are reused (i.e. moved from the global release pool to the
allocation pool of a specific thread), but this is a bug and will be
fixed in a separate patch.

In fact, the comment in the header file already just promises that it
influences the pool size, so reflect this in the name of the functions.
As a nice side effect, the shorter function name makes some line
wrapping unnecessary.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220510151020.105528-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-05-12 12:20:45 +02:00
Bernhard Beschow
76acef2b73 hw/xen/xen_pt: Resolve igd_passthrough_isa_bridge_create() indirection
Now that igd_passthrough_isa_bridge_create() is implemented within the
xen context it may use Xen* data types directly and become
xen_igd_passthrough_isa_bridge_create(). This resolves an indirection.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20220326165825.30794-3-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12 12:07:06 +02:00
Bernhard Beschow
4a8027363e hw/xen/xen_pt: Confine igd-passthrough-isa-bridge to XEN
igd-passthrough-isa-bridge is only requested in xen_pt but was
implemented in pc_piix.c. This caused xen_pt to dependend on i386/pc
which is hereby resolved.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20220326165825.30794-2-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12 12:07:06 +02:00
Markus Armbruster
52581c718c Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
2022-05-11 16:49:06 +02:00
Richard Henderson
178bacb66d Pull request
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
   used for async I/O.
 
 - Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
 c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
 iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
 4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
 Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
 08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
 NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
 =t5eR
 -----END PGP SIGNATURE-----

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
  used for async I/O.

- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
# c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
# iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
# 4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
# Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
# 08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
# NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
# =t5eR
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 May 2022 05:52:56 AM PDT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]

* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
  virtio-scsi: move request-related items from .h to .c
  virtio-scsi: clean up virtio_scsi_handle_cmd_vq()
  virtio-scsi: clean up virtio_scsi_handle_ctrl_vq()
  virtio-scsi: clean up virtio_scsi_handle_event_vq()
  virtio-scsi: don't waste CPU polling the event virtqueue
  virtio-scsi: fix ctrl and event handler functions in dataplane mode
  util/event-loop-base: Introduce options to set the thread pool size
  util/main-loop: Introduce the main loop into QOM
  Introduce event-loop-base abstract class

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-09 11:07:04 -07:00
Richard Henderson
b0c3c60366 target-arm queue:
* MAINTAINERS/.mailmap: update email for Leif Lindholm
  * hw/arm: add version information to sbsa-ref machine DT
  * Enable new features for -cpu max:
    FEAT_Debugv8p2, FEAT_Debugv8p4, FEAT_RAS (minimal version only),
    FEAT_IESB, FEAT_CSV2, FEAT_CSV2_2, FEAT_CSV3, FEAT_DGH
  * Emulate Cortex-A76
  * Emulate Neoverse-N1
  * Fix the virt board default NUMA topology
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJ5AbsZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vyFEACZZ6tRVJYB6YpIzI7rho9x
 hVQIMTc4D5lmVetJnbLdLazifIy60oIOtSKV3Y3oj5DLMcsf6NITrPaFPWNRX3Nm
 mcbTCT5FGj8i7b1CkpEylLwvRQbIaoz2GnJPckdYelxxAq1uJNog3fmoG8nVtJ1F
 HfXVCVkZGQyiyr6Y2/zn3vpdp9n6/4RymN8ugizkcgIRII87DKV+DNDalw613JG4
 5xxBOGkYzo5DZM8TgL8Ylmb5Jy9XY0EN1xpkyHFOg6gi0B3UZTxHq5SvK6NFoZLJ
 ogyhmMh6IjEfhUIDCtWG9VCoPyWpOXAFoh7D7akFVB4g2SIvBvcuGzFxCAsh5q3K
 s+9CgNX1SZpJQkT1jLjQlNzoUhh8lNc7QvhPWVrbAj3scc+1xVnS5MJsokEV21Cx
 /bp3mFwCL+Q4gjsMKx1nKSvxLv8xlxRtIilmlfj+wvpkenIfIwHYjbvItJTlAy1L
 +arx8fqImNQorxO6oMjOuAlSbNnDKup5qvwGghyu/qz/YEnGQVzN6gI324Km081L
 1u31H/B3C2rj3qMsYMp5yOqgprXi1D5c6wfYIpLD/C4UfHgIlRiprawZPDM7fAhX
 vxhUhhj3e9OgkbC9yqd6SUR2Uk3YaQlp319LyoZa3VKSvjBTciFsMXXnIV1UitYp
 BGtz8+FypPVkYH7zQB9c7Q==
 =ey1m
 -----END PGP SIGNATURE-----

Merge tag 'pull-target-arm-20220509' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * MAINTAINERS/.mailmap: update email for Leif Lindholm
 * hw/arm: add version information to sbsa-ref machine DT
 * Enable new features for -cpu max:
   FEAT_Debugv8p2, FEAT_Debugv8p4, FEAT_RAS (minimal version only),
   FEAT_IESB, FEAT_CSV2, FEAT_CSV2_2, FEAT_CSV3, FEAT_DGH
 * Emulate Cortex-A76
 * Emulate Neoverse-N1
 * Fix the virt board default NUMA topology

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJ5AbsZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vyFEACZZ6tRVJYB6YpIzI7rho9x
# hVQIMTc4D5lmVetJnbLdLazifIy60oIOtSKV3Y3oj5DLMcsf6NITrPaFPWNRX3Nm
# mcbTCT5FGj8i7b1CkpEylLwvRQbIaoz2GnJPckdYelxxAq1uJNog3fmoG8nVtJ1F
# HfXVCVkZGQyiyr6Y2/zn3vpdp9n6/4RymN8ugizkcgIRII87DKV+DNDalw613JG4
# 5xxBOGkYzo5DZM8TgL8Ylmb5Jy9XY0EN1xpkyHFOg6gi0B3UZTxHq5SvK6NFoZLJ
# ogyhmMh6IjEfhUIDCtWG9VCoPyWpOXAFoh7D7akFVB4g2SIvBvcuGzFxCAsh5q3K
# s+9CgNX1SZpJQkT1jLjQlNzoUhh8lNc7QvhPWVrbAj3scc+1xVnS5MJsokEV21Cx
# /bp3mFwCL+Q4gjsMKx1nKSvxLv8xlxRtIilmlfj+wvpkenIfIwHYjbvItJTlAy1L
# +arx8fqImNQorxO6oMjOuAlSbNnDKup5qvwGghyu/qz/YEnGQVzN6gI324Km081L
# 1u31H/B3C2rj3qMsYMp5yOqgprXi1D5c6wfYIpLD/C4UfHgIlRiprawZPDM7fAhX
# vxhUhhj3e9OgkbC9yqd6SUR2Uk3YaQlp319LyoZa3VKSvjBTciFsMXXnIV1UitYp
# BGtz8+FypPVkYH7zQB9c7Q==
# =ey1m
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 May 2022 04:57:47 AM PDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220509' of https://git.linaro.org/people/pmaydell/qemu-arm: (32 commits)
  hw/acpi/aml-build: Use existing CPU topology to build PPTT table
  hw/arm/virt: Fix CPU's default NUMA node ID
  qtest/numa-test: Correct CPU and NUMA association in aarch64_numa_cpu()
  hw/arm/virt: Consider SMP configuration in CPU topology
  qtest/numa-test: Specify CPU topology in aarch64_numa_cpu()
  qapi/machine.json: Add cluster-id
  hw/arm: add versioning to sbsa-ref machine DT
  target/arm: Define neoverse-n1
  target/arm: Define cortex-a76
  target/arm: Enable FEAT_DGH for -cpu max
  target/arm: Enable FEAT_CSV3 for -cpu max
  target/arm: Enable FEAT_CSV2_2 for -cpu max
  target/arm: Enable FEAT_CSV2 for -cpu max
  target/arm: Enable FEAT_IESB for -cpu max
  target/arm: Enable FEAT_RAS for -cpu max
  target/arm: Implement ESB instruction
  target/arm: Implement virtual SError exceptions
  target/arm: Enable SCR and HCR bits for RAS
  target/arm: Add minimal RAS registers
  target/arm: Enable FEAT_Debugv8p4 for -cpu max
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-09 09:33:53 -07:00
Gavin Shan
ae9141d4a3 hw/acpi/aml-build: Use existing CPU topology to build PPTT table
When the PPTT table is built, the CPU topology is re-calculated, but
it's unecessary because the CPU topology has been populated in
virt_possible_cpu_arch_ids() on arm/virt machine.

This reworks build_pptt() to avoid by reusing the existing IDs in
ms->possible_cpus. Currently, the only user of build_pptt() is
arm/virt machine.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20220503140304.855514-7-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-05-09 11:47:55 +01:00
Gavin Shan
4c18bc1923 hw/arm/virt: Fix CPU's default NUMA node ID
When CPU-to-NUMA association isn't explicitly provided by users,
the default one is given by mc->get_default_cpu_node_id(). However,
the CPU topology isn't fully considered in the default association
and this causes CPU topology broken warnings on booting Linux guest.

For example, the following warning messages are observed when the
Linux guest is booted with the following command lines.

  /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
  -accel kvm -machine virt,gic-version=host               \
  -cpu host                                               \
  -smp 6,sockets=2,cores=3,threads=1                      \
  -m 1024M,slots=16,maxmem=64G                            \
  -object memory-backend-ram,id=mem0,size=128M            \
  -object memory-backend-ram,id=mem1,size=128M            \
  -object memory-backend-ram,id=mem2,size=128M            \
  -object memory-backend-ram,id=mem3,size=128M            \
  -object memory-backend-ram,id=mem4,size=128M            \
  -object memory-backend-ram,id=mem4,size=384M            \
  -numa node,nodeid=0,memdev=mem0                         \
  -numa node,nodeid=1,memdev=mem1                         \
  -numa node,nodeid=2,memdev=mem2                         \
  -numa node,nodeid=3,memdev=mem3                         \
  -numa node,nodeid=4,memdev=mem4                         \
  -numa node,nodeid=5,memdev=mem5
         :
  alternatives: patching kernel code
  BUG: arch topology borken
  the CLS domain not a subset of the MC domain
  <the above error log repeats>
  BUG: arch topology borken
  the DIE domain not a subset of the NODE domain

With current implementation of mc->get_default_cpu_node_id(),
CPU#0 to CPU#5 are associated with NODE#0 to NODE#5 separately.
That's incorrect because CPU#0/1/2 should be associated with same
NUMA node because they're seated in same socket.

This fixes the issue by considering the socket ID when the default
CPU-to-NUMA association is provided in virt_possible_cpu_arch_ids().
With this applied, no more CPU topology broken warnings are seen
from the Linux guest. The 6 CPUs are associated with NODE#0/1, but
there are no CPUs associated with NODE#2/3/4/5.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-id: 20220503140304.855514-6-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-05-09 11:47:55 +01:00
Gavin Shan
c9ec4cb5e4 hw/arm/virt: Consider SMP configuration in CPU topology
Currently, the SMP configuration isn't considered when the CPU
topology is populated. In this case, it's impossible to provide
the default CPU-to-NUMA mapping or association based on the socket
ID of the given CPU.

This takes account of SMP configuration when the CPU topology
is populated. The die ID for the given CPU isn't assigned since
it's not supported on arm/virt machine. Besides, the used SMP
configuration in qtest/numa-test/aarch64_numa_cpu() is corrcted
to avoid testing failure

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-4-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-05-09 11:47:54 +01:00
Gavin Shan
1dcf7001d4 qapi/machine.json: Add cluster-id
This adds cluster-id in CPU instance properties, which will be used
by arm/virt machine. Besides, the cluster-id is also verified or
dumped in various spots:

  * hw/core/machine.c::machine_set_cpu_numa_node() to associate
    CPU with its NUMA node.

  * hw/core/machine.c::machine_numa_finish_cpu_init() to record
    CPU slots with no NUMA mapping set.

  * hw/core/machine-hmp-cmds.c::hmp_hotpluggable_cpus() to dump
    cluster-id.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-2-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-05-09 11:47:54 +01:00
Leif Lindholm
90ea2cceb2 hw/arm: add versioning to sbsa-ref machine DT
The sbsa-ref machine is continuously evolving. Some of the changes we
want to make in the near future, to align with real components (e.g.
the GIC-700), will break compatibility for existing firmware.

Introduce two new properties to the DT generated on machine generation:
- machine-version-major
  To be incremented when a platform change makes the machine
  incompatible with existing firmware.
- machine-version-minor
  To be incremented when functionality is added to the machine
  without causing incompatibility with existing firmware.
  to be reset to 0 when machine-version-major is incremented.

This versioning scheme is *neither*:
- A QEMU versioned machine type; a given version of QEMU will emulate
  a given version of the platform.
- A reflection of level of SBSA (now SystemReady SR) support provided.

The version will increment on guest-visible functional changes only,
akin to a revision ID register found on a physical platform.

These properties are both introduced with the value 0.
(Hence, a machine where the DT is lacking these nodes is equivalent
to version 0.0.)

Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20220505113947.75714-1-quic_llindhol@quicinc.com
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Radoslaw Biernacki <rad@semihalf.com>
Cc: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-05-09 11:47:54 +01:00
Richard Henderson
5db6de806a target/arm: Define neoverse-n1
Enable the n1 for virt and sbsa board use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-05-09 11:47:54 +01:00
Richard Henderson
2f6283fc8e target/arm: Define cortex-a76
Enable the a76 for virt and sbsa board use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-05-09 11:47:54 +01:00
Stefan Hajnoczi
3dc584abee virtio-scsi: move request-related items from .h to .c
There is no longer a need to expose the request and related APIs in
virtio-scsi.h since there are no callers outside virtio-scsi.c.

Note the block comment in VirtIOSCSIReq has been adjusted to meet the
coding style.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
ad482b57ef virtio-scsi: clean up virtio_scsi_handle_cmd_vq()
virtio_scsi_handle_cmd_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
73b3b49f18 virtio-scsi: clean up virtio_scsi_handle_ctrl_vq()
virtio_scsi_handle_ctrl_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
37ce2de951 virtio-scsi: clean up virtio_scsi_handle_event_vq()
virtio_scsi_handle_event_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
38738f7dbb virtio-scsi: don't waste CPU polling the event virtqueue
The virtio-scsi event virtqueue is not emptied by its handler function.
This is typical for rx virtqueues where the device uses buffers when
some event occurs (e.g. a packet is received, an error condition
happens, etc).

Polling non-empty virtqueues wastes CPU cycles. We are not waiting for
new buffers to become available, we are waiting for an event to occur,
so it's a misuse of CPU resources to poll for buffers.

Introduce the new virtio_queue_aio_attach_host_notifier_no_poll() API,
which is identical to virtio_queue_aio_attach_host_notifier() except
that it does not poll the virtqueue.

Before this patch the following command-line consumed 100% CPU in the
IOThread polling and calling virtio_scsi_handle_event():

  $ qemu-system-x86_64 -M accel=kvm -m 1G -cpu host \
      --object iothread,id=iothread0 \
      --device virtio-scsi-pci,iothread=iothread0 \
      --blockdev file,filename=test.img,aio=native,cache.direct=on,node-name=drive0 \
      --device scsi-hd,drive=drive0

After this patch CPU is no longer wasted.

Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20220427143541.119567-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
2f743ef636 virtio-scsi: fix ctrl and event handler functions in dataplane mode
Commit f34e8d8b8d ("virtio-scsi: prepare
virtio_scsi_handle_cmd for dataplane") prepared the virtio-scsi cmd
virtqueue handler function to be used in both the dataplane and
non-datpalane code paths.

It failed to convert the ctrl and event virtqueue handler functions,
which are not designed to be called from the dataplane code path but
will be since the ioeventfd is set up for those virtqueues when
dataplane starts.

Convert the ctrl and event virtqueue handler functions now so they
operate correctly when called from the dataplane code path. Avoid code
duplication by extracting this code into a helper function.

Fixes: f34e8d8b8d ("virtio-scsi: prepare virtio_scsi_handle_cmd for dataplane")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-2-stefanha@redhat.com
[Fixed s/by used/be used/ typo pointed out by Michael Tokarev
<mjt@tls.msk.ru>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:44:26 +01:00
Gautam Agrawal
f9bcb2d684 Warn user if the vga flag is passed but no vga device is created
A global boolean variable "vga_interface_created"(declared in softmmu/globals.c)
has been used to track the creation of vga interface. If the vga flag is passed
in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0.
To warn user, the condition checks if vga_interface_created is false
and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the
user regarding the creation of VGA device.

The warning "A -vga option was passed but this
machine type does not use that option; no VGA device has been created"
is logged if vga flag is passed but no vga device is created.

This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards.

Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581
Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com>
[thuth: Fix wrong warning with "-device" in some cases as reported by Paolo]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-09 08:21:14 +02:00
Mark Cave-Ayland
1f11051619 artist: only render dirty scanlines on the display surface
The framebuffer_update_display() function returns the dirty scanlines that were
touched since the last display update, however artist_update_display() always calls
dpy_gfx_update() with start and end scanlines of 0 and s->height causing the
entire display surface to be rendered on every update.

Update artist_update_display() so that dpy_gfx_update() only renders the dirty
scanlines on the display surface, bypassing the display surface rendering
completely if framebuffer_update_display() indicates no changes occurred.

This noticeably improves boot performance when the framebuffer is enabled on my
rather modest laptop here, including making the GTK UI usable.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220504153708.10352-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
ada804eb89 artist: remove unused ROP8OFF() macro
This macro is unused and so can simply be removed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220504153708.10352-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
5d61789e04 artist: checkpatch and newline style fixes
Ensure that subsequent patches do not cause checkpatch to fail and also tidy up
extra/missing newlines.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220504153708.10352-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
297d410387 hppa: simplify machine function names in machine.c
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-51-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
42cc2bf63c hppa: fold machine_hppa_machine_init() into machine_hppa_machine_init_class_init()
There is no need for a separate function to set the machine class properties
separately from the others.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-50-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
c165905c17 hppa: use MACHINE QOM macros for defining the hppa machine
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-49-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
148da67085 hppa: remove the empty hppa_sys.h file
This file is now just a simple wrapper that includes hppa_hardware.h so remove
the file completely, and update its single user in machine.c to include
hppa_hardware.h directly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-48-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
932befaa55 hppa: move enable_lan() define from hppa_sys.h to machine.c
Now that the board configuration is in one place, the define is only needed when
wiring up the board in machine.c.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-47-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
192e32284b hppa: remove unused trace-events from from hw/hppa
Now that there are no longer any devices in hw/hppa the trace-events file is
empty and can be removed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-46-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
3c2ce5bba3 hppa: remove hw/hppa/pci.c
The functions and definitions in this file are not used anywhere within the
generic hppa machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-45-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
28f5332ae9 hppa: move hppa_pci_ignore_ops from pci.c to machine.c
The memory region only has one user which is for ensuring accesses to the ISA
bus memory do not fault.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-44-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
45f569a116 lasi: move from hw/hppa to hw/misc
Move the LASI device implementation from hw/hppa to hw/misc so that it is
located with all the other miscellaneous devices.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-43-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
134ba73f32 hppa: move device headers from hppa_sys.h into individual .c files
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-42-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
8e81ffe320 lasi: use numerical constant for iar reset value
This is to allow us to decouple the LASI device from the board logic. If it is
decided later that this value needs to be configurable then it can easily be
converted to a qdev property.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-41-mark.cave-ayland@ilande.co.uk>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
ca7b468be8 lasi: use constants for device register offsets
Instead of generating the offset based upon the physical address of the
register, add constants for each of the device registers to lasi.h and
update lasi.c to use them.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-40-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
e881e3c83a lasi: move lasi_initfn() to machine.c
Move the simplified lasi_initfn() back to machine.c whilst also renaming it
back to its original lasi_init() name.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-39-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
deaa5d3b4e lasi: remove address space parameter from lasi_initfn()
Now that all of the LASI devices are mapped by the board, this parameter is no
longer required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-38-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
d26c575c44 lasi: move PS2 initialisation to machine.c
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-37-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
2da547b819 lasi: move second serial port initialisation to machine.c
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-36-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
9701e56943 lasi: move parallel port initialisation to machine.c
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-35-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
c3c3fe4708 lasi: move LAN initialisation to machine.c
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-34-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
954f6f7564 lasi: update lasi_initfn() to return LASIState
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-33-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
fe744ca3ee lasi: fix serial port initialisation
The existing code checks for serial_hd(1) but sets the LASI serial port chardev
to serial_hd(0). Use serial_hd(1) for the LASI serial port and also set the
serial port endian to DEVICE_BIG_ENDIAN (which also matches the endian of the
existing serial port).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-32-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
e004499fd5 lasi: use qdev GPIOs to wire up IRQs in lasi_initfn()
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-31-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
cb9f6c4b65 lasi: define IRQ inputs as qdev GPIOs
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-30-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
0f04d5777b lasi: replace lasi_get_irq() with defined constants
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-29-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:37 +01:00
Mark Cave-Ayland
b514f43244 lasi: move LASIState and associated QOM structures to lasi.h
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-28-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
b3cdb7e4b2 lasi: move initialisation of iar and rtc to new lasi_reset() function
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-27-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
2683758c7c lasi: move register memory mapping from lasi.c to machine.c
The device register should be mapped directly by the board code.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-26-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
46f2594cfc lasi: move memory region initialisation to new lasi_init() function
Create a new lasi_init() instance initialisation function and move the LASI
memory region initialisation into it. Rename the existing lasi_init() function
to lasi_initfn() for now.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-25-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
63588da809 lasi: checkpatch fixes
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-24-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
0db9350e6e dino: move from hw/hppa to hw/pci-host
Move the DINO device implementation from hw/hppa to hw/pci-host so that it is
located with all the other PCI host bridges.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-23-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
e111f288d9 dino: move DINO HPA constants from hppa_hardware.h to dino.h
This is to allow us to decouple the DINO device from the board logic.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-22-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
2fb11c7cac dino: use numerical constant for iar0 and iar1 reset values
This is to allow us to decouple the DINO device from the board logic. The choice
of using a hard-coded constant (along with a comment) is to match how this is
already done for toc_addr. If it is decided later that these values need to be
configurable then they can easily be converted to qdev properties.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-21-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
0d06899631 hppa: move dino_init() from dino.c to machine.c
Now that dino_init() is completely decoupled from dino.c it can be moved to
machine.c with the rest of the board configuration.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-20-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
36f9bbdb17 dino: remove unused dino_set_timer_irq() IRQ handler
According to the comments in dino.c the timer IRQ is unused, so remove the empty
dino_set_timer_irq() handler function and simply pass NULL to mc146818_rtc_init()
in machine.c instead.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-19-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
a4b74c1924 dino: wire up serial IRQ using a qdev GPIO in machine.c
This makes it unnecessary to allocate a separate IRQ for the serial port.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-18-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
4b5faaf94f dino: define IRQ inputs as qdev GPIOs
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-17-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
10c5264172 dino.h: add defines for DINO IRQ numbers
This is to allow the DINO IRQs to be defined as qdev GPIOs.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-16-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
efdb3ce2de machine.c: map DINO device during board configuration
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-15-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
05245daf47 dino: change dino_init() to return the DINO device instead of PCIBus
This is in preparation for using more qdev APIs during the configuration of the
HPPA generic machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-14-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
0d98fbb57d hppa: use new CONFIG_HPPA_B160L option instead of CONFIG_DINO to build hppa machine
DINO refers to the GSC-PCI bridge device which will soon be handled separately,
however the QEMU HPPA machine is actually based upon the HPPA B160L as indicated
by the Linux kernel dmesg output when booted in qemu-system-hppa and the QEMU
MAINTAINERS file.

Update the machine configuration to use CONFIG_HPPA_B160L instead of CONFIG_DINO
and also update the machine description accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-13-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
14e275efcb dino: split declarations from dino.c into dino.h
This is to allow access to DinoState from outside dino.c. With the changes to
the headers it is now possible to remove the duplicate definition for
TYPE_DINO_PCI_HOST_BRIDGE from hppa_sys.h.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
079e7ad989 dino: return PCIBus from dino_init() using qdev_get_child_bus()
This allows access to the PCI bus without having to reference parent_obj directly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-11-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
ee313d5abb dino: use QOM cast instead of directly referencing parent_obj
Use a QOM cast in both dino_chip_read_with_attrs() and dino_chip_write_with_attrs()
instead of directly referencing parent_obj.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-10-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
98d168f359 dino: move initial register configuration to new dino_pcihost_reset() function
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-9-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
9cf69f444c dino: move PCI bus master address space setup to dino_pcihost_realize()
Add a new dino_pcihost_unrealize() function to remove the address space when the
device is unrealized.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-8-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
5ac6c43c85 dino: move pci_setup_iommu() to dino_pcihost_init()
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
270b29587f dino: add memory-as property containing a link to the memory address space
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
cc363c4a10 dino: move PCI windows initialisation to dino_pcihost_init()
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
63901b6cc4 dino: move PCI bus initialisation to dino_pcihost_init()
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
7cdfa94166 dino: move registers from dino_init() to DINO_PCI_BRIDGE init function
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Mark Cave-Ayland
17bd42896d dino: checkpatch fixes
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Richard Henderson
f133664915 * WHPX support for xcr0
* qga-wss fixes
 * Meson conversions
 * Removed -soundhw pcspk
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ2CEcUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMHUAgAq6BXpuqyAMMnrylvt77qwGG37keV
 lxw8aGciztUJIZFi1dAxIuw2ohsFGdfxKKt1sEIUu33OSBeb1I786f2xuLF7t7Am
 An0Jd5I/V/9ClRrz2ITiLOCBzPTU3faY8h382OdnMJCkAFjjF5PIoECZWRBtjPVq
 B4jDKuredgCt4EGDViQr0R5om+bBdHQmHcPHTNIv3UsRu2RhzIieBy4qLBUADIMU
 wJeW0jIdtfE9gwfdjtdom1tDxxKNtYttyIAQY8SpSEGLHzpqfNW0Z3UFGcswIk8g
 QCJpsddJzKivvS3a8pm/3tKkSWmqcgGNH2b3CFEZ26MkkLZIOYiVmPGNqQ==
 =7/z9
 -----END PGP SIGNATURE-----

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* WHPX support for xcr0
* qga-wss fixes
* Meson conversions
* Removed -soundhw pcspk

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ2CEcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMHUAgAq6BXpuqyAMMnrylvt77qwGG37keV
# lxw8aGciztUJIZFi1dAxIuw2ohsFGdfxKKt1sEIUu33OSBeb1I786f2xuLF7t7Am
# An0Jd5I/V/9ClRrz2ITiLOCBzPTU3faY8h382OdnMJCkAFjjF5PIoECZWRBtjPVq
# B4jDKuredgCt4EGDViQr0R5om+bBdHQmHcPHTNIv3UsRu2RhzIieBy4qLBUADIMU
# wJeW0jIdtfE9gwfdjtdom1tDxxKNtYttyIAQY8SpSEGLHzpqfNW0Z3UFGcswIk8g
# QCJpsddJzKivvS3a8pm/3tKkSWmqcgGNH2b3CFEZ26MkkLZIOYiVmPGNqQ==
# =7/z9
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 07 May 2022 12:48:55 AM CDT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (25 commits)
  pc: remove -soundhw pcspk
  configure, meson: move vhost options to Meson
  meson: use have_vhost_* variables to pick sources
  meson: create have_vhost_* variables
  build: move vhost-user-fs configuration to Kconfig
  build: move vhost-scsi configuration to Kconfig
  build: move vhost-vsock configuration to Kconfig
  configure: simplify vhost-net-{user, vdpa} configuration
  meson, virtio: place all virtio-pci devices under virtio_pci_ss
  configure: omit options with default values from meson command line
  meson: pass more options directly as -D
  configure: switch directory options to automatic parsing
  meson: always combine directories with prefix
  meson, configure: move --interp-prefix to meson
  meson, configure: move --with-pkgversion, CONFIG_STAMP to meson
  meson, configure: move bdrv whitelists to meson
  meson, configure: move --tls-priority to meson
  configure: switch string options to automatic parsing
  configure: move Windows flags detection to meson
  configure, meson: move iasl detection to meson
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-07 06:14:16 -05:00
Paolo Bonzini
6033b9ecd4 pc: remove -soundhw pcspk
The pcspk device is the only user of the init_isa function, and the only
-soundhw option which does not create a new device (it hacks into the
PCSpkState by hand).  Remove it, since it was deprecated.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-07 07:46:59 +02:00
Paolo Bonzini
43b6d7ee1f meson: use have_vhost_* variables to pick sources
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-07 07:46:58 +02:00
Paolo Bonzini
5166dabf4f build: move vhost-user-fs configuration to Kconfig
vhost-user-fs is a device and it should be possible to enable/disable
it with --without-default-devices, not --without-default-features.
Compute its default value in Kconfig to obtain the more intuitive
behavior.

In this case the configure options were undocumented, too.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-07 07:46:58 +02:00
Paolo Bonzini
d13b200253 build: move vhost-scsi configuration to Kconfig
vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features.  Compute their default value in Kconfig to
obtain the more intuitive behavior.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-07 07:46:58 +02:00
Paolo Bonzini
9972ae314f build: move vhost-vsock configuration to Kconfig
vhost-vsock and vhost-user-vsock are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features.  Compute their default value in Kconfig to
obtain the more intuitive behavior.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-07 07:46:58 +02:00
Paolo Bonzini
10925d0617 meson, virtio: place all virtio-pci devices under virtio_pci_ss
Since a sourceset already exists for this, avoid unnecessary repeat
of CONFIG_VIRTIO_PCI.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-07 07:46:58 +02:00
Richard Henderson
11314643c3 target/xtensa updates for v7.1:
- expand test coverage to MMUv3, cores without windowed registers or
   loop option;
 - import lx106 core (used in the esp8266 IoT chips);
 - use tcg_constant_* in the front end;
 - add clock input to the xtensa CPU;
 - fix reset state of the xtensa MX PIC;
 - implement cache testing opcodes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmJ1o9oTHGpjbXZia2Jj
 QGdtYWlsLmNvbQAKCRBR+cyR+D+gRBimD/0TchAEBaa+Z5BOEzg42Nx640VQZvAV
 w6LogpteHxdpQ46ml/2jrL7SKhWLolkA+u/QFn5imfUK5rih2B6ICoucvqmCWAIU
 s2fiZyhkhs8r5VtgRhh2s8j48Ktly8BaaM3AliUh/NzTiqmM/p5hO5UoEQCE5L4M
 j1YLOIn12YSQr3YBxI/0S3Uy+xdseLqnybP226xaj96sAF5WtImoFBAn+WHl1jDN
 mWD+XvV3xZQTuekfsTYQIkJp6voMZth1EYpcrZeXaV2yuApOFNus2W2hItCYu49Y
 qDjlRRA49E1wVbp/A0T6pg/GXmCsCY6737TehEeZUH0iNeXlg5epyAnKwSqutdvk
 C/PTEFH5SjvBJ2xFlNJ6Ih5QFip0d7MwZvnoJgB2Q/o8weU/TT/aGWOwa2mDEQ8n
 bMaTrEZKluPVzj8QJiTOKQo9EOLIXYdT4m5RPPA5zIRcAY2tlfTbm3ubucIcI4mn
 M+33R6/QyYP82LkPtOn+o0bR6jmSWqSJhyH0dNNY2oDXIBjke9K1e7q1F57pyQ4h
 Tl8MOv+dh5mG/d7Ien1HDU+WD7/U/a2kLz3xAUlxltWP2FFiQiYg/4cBYhZ6VEMH
 am4Mw6oCqpWsN5IpMl7s8ASuf7KK9jnWl7bbzHKJVJLyLpYTHjWhAnWk6Z7xFQGc
 +whHrCJumwSvLA==
 =18f4
 -----END PGP SIGNATURE-----

Merge tag '20220506-xtensa-1' of https://github.com/OSLL/qemu-xtensa into staging

target/xtensa updates for v7.1:

- expand test coverage to MMUv3, cores without windowed registers or
  loop option;
- import lx106 core (used in the esp8266 IoT chips);
- use tcg_constant_* in the front end;
- add clock input to the xtensa CPU;
- fix reset state of the xtensa MX PIC;
- implement cache testing opcodes.

# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmJ1o9oTHGpjbXZia2Jj
# QGdtYWlsLmNvbQAKCRBR+cyR+D+gRBimD/0TchAEBaa+Z5BOEzg42Nx640VQZvAV
# w6LogpteHxdpQ46ml/2jrL7SKhWLolkA+u/QFn5imfUK5rih2B6ICoucvqmCWAIU
# s2fiZyhkhs8r5VtgRhh2s8j48Ktly8BaaM3AliUh/NzTiqmM/p5hO5UoEQCE5L4M
# j1YLOIn12YSQr3YBxI/0S3Uy+xdseLqnybP226xaj96sAF5WtImoFBAn+WHl1jDN
# mWD+XvV3xZQTuekfsTYQIkJp6voMZth1EYpcrZeXaV2yuApOFNus2W2hItCYu49Y
# qDjlRRA49E1wVbp/A0T6pg/GXmCsCY6737TehEeZUH0iNeXlg5epyAnKwSqutdvk
# C/PTEFH5SjvBJ2xFlNJ6Ih5QFip0d7MwZvnoJgB2Q/o8weU/TT/aGWOwa2mDEQ8n
# bMaTrEZKluPVzj8QJiTOKQo9EOLIXYdT4m5RPPA5zIRcAY2tlfTbm3ubucIcI4mn
# M+33R6/QyYP82LkPtOn+o0bR6jmSWqSJhyH0dNNY2oDXIBjke9K1e7q1F57pyQ4h
# Tl8MOv+dh5mG/d7Ien1HDU+WD7/U/a2kLz3xAUlxltWP2FFiQiYg/4cBYhZ6VEMH
# am4Mw6oCqpWsN5IpMl7s8ASuf7KK9jnWl7bbzHKJVJLyLpYTHjWhAnWk6Z7xFQGc
# +whHrCJumwSvLA==
# =18f4
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 06 May 2022 05:40:26 PM CDT
# gpg:                using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg:                issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg:                 aka "Max Filippov <max.filippov@cogentembedded.com>" [undefined]
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB  17D8 51F9 CC91 F83F A044

* tag '20220506-xtensa-1' of https://github.com/OSLL/qemu-xtensa:
  target/xtensa: implement cache test option opcodes
  tests/tcg/xtensa: fix vectors and checks in timer test
  tests/tcg/xtensa: enable mmu tests for MMUv3
  tests/tcg/xtensa: enable autorefill phys_mem tests for MMUv3
  tests/tcg/xtensa: remove dependency on the loop option
  tests/tcg/xtensa: fix watchpoint test
  tests/tcg/xtensa: restore vecbase SR after test
  tests/tcg/xtensa: fix build for cores without windowed registers
  hw/xtensa: fix reset value of MIROUT register of MX PIC
  target/xtensa: add clock input to xtensa CPU
  target/xtensa: import core lx106
  target/xtensa: use tcg_constant_* for remaining opcodes
  target/xtensa: use tcg_constant_* for FPU conversion opcodes
  target/xtensa: use tcg_constant_* for numbered special registers
  target/xtensa: use tcg_constant_* for TLB opcodes
  target/xtensa: use tcg_constant_* for exceptions
  target/xtensa: use tcg_contatnt_* for numeric literals
  target/xtensa: fix missing tcg_temp_free in gen_window_check

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-06 21:37:46 -05:00
Max Filippov
c6f3f334d1 hw/xtensa: fix reset value of MIROUT register of MX PIC
MX PIC comes out of reset with IRQ routing registers set to 0, thus
not delivering any external IRQ to any connected CPU by default.
Fix the model to match the hardware.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-05-06 15:27:40 -07:00
Yi Liu
44ee6aaae0 vfio/common: Rename VFIOGuestIOMMU::iommu into ::iommu_mr
Rename VFIOGuestIOMMU iommu field into iommu_mr. Then it becomes clearer
it is an IOMMU memory region.

no functional change intended

Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-4-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:51 -06:00
Eric Auger
0d570a2572 vfio/pci: Use vbasedev local variable in vfio_realize()
Using a VFIODevice handle local variable to improve the code readability.

no functional change intended

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:50 -06:00
Eric Auger
9d38ffc5d8 hw/vfio/pci: fix vfio_pci_hot_reset_result trace point
"%m" format specifier is not interpreted by the trace infrastructure
and thus "%m" is output instead of the actual errno string. Fix it by
outputting strerror(errno).

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-2-yi.l.liu@intel.com
[aw: replace commit log as provided by Eric]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:50 -06:00
Eric Auger
851d6d1a0f vfio/common: remove spurious tpm-crb-cmd misalignment warning
The CRB command buffer currently is a RAM MemoryRegion and given
its base address alignment, it causes an error report on
vfio_listener_region_add(). This region could have been a RAM device
region, easing the detection of such safe situation but this option
was not well received. So let's add a helper function that uses the
memory region owner type to detect the situation is safe wrt
the assignment. Other device types can be checked here if such kind
of problem occurs again.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-3-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:50 -06:00
Xiang Chen
99510d271b vfio/common: Fix a small boundary issue of a trace
It uses [offset, offset + size - 1] to indicate that the length of range is
size in most places in vfio trace code (such as
trace_vfio_region_region_mmap()) execpt trace_vfio_region_sparse_mmap_entry().
So change it for trace_vfio_region_sparse_mmap_entry(), but if size is zero,
the trace will be weird with an underflow, so move the trace and trace it
only if size is not zero.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1650100104-130737-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:50 -06:00
Longpeng(Mike)
dc580d51f7 vfio: defer to commit kvm irq routing when enable msi/msix
In migration resume phase, all unmasked msix vectors need to be
setup when loading the VF state. However, the setup operation would
take longer if the VM has more VFs and each VF has more unmasked
vectors.

The hot spot is kvm_irqchip_commit_routes, it'll scan and update
all irqfds that are already assigned each invocation, so more
vectors means need more time to process them.

vfio_pci_load_config
  vfio_msix_enable
    msix_set_vector_notifiers
      for (vector = 0; vector < dev->msix_entries_nr; vector++) {
        vfio_msix_vector_do_use
          vfio_add_kvm_msi_virq
            kvm_irqchip_commit_routes <-- expensive
      }

We can reduce the cost by only committing once outside the loop.
The routes are cached in kvm_state, we commit them first and then
bind irqfd for each vector.

The test VM has 128 vcpus and 8 VF (each one has 65 vectors),
we measure the cost of the vfio_msix_enable for each VF, and
we can see 90+% costs can be reduce.

VF      Count of irqfds[*]  Original        With this patch

1st           65            8               2
2nd           130           15              2
3rd           195           22              2
4th           260           24              3
5th           325           36              2
6th           390           44              3
7th           455           51              3
8th           520           58              4
Total                       258ms           21ms

[*] Count of irqfds
How many irqfds that already assigned and need to process in this
round.

The optimization can be applied to msi type too.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-6-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:50 -06:00
Longpeng(Mike)
75d546fc18 Revert "vfio: Avoid disabling and enabling vectors repeatedly in VFIO migration"
Commit ecebe53fe9 ("vfio: Avoid disabling and enabling vectors
repeatedly in VFIO migration") avoids inefficiently disabling and
enabling vectors repeatedly and lets the unmasked vectors be enabled
one by one.

But we want to batch multiple routes and defer the commit, and only
commit once outside the loop of setting vector notifiers, so we
cannot enable the vectors one by one in the loop now.

Revert that commit and we will take another way in the next patch,
it can not only avoid disabling/enabling vectors repeatedly, but
also satisfy our requirement of defer to commit.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-5-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:50 -06:00
Longpeng(Mike)
8ab217d5d3 vfio: simplify the failure path in vfio_msi_enable
Use vfio_msi_disable_common to simplify the error handling
in vfio_msi_enable.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-4-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:50 -06:00
Longpeng(Mike)
be4a46eccf vfio: move re-enabling INTX out of the common helper
Move re-enabling INTX out, and the callers should decide to
re-enable it or not.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-3-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:50 -06:00
Longpeng(Mike)
a6f5770fb2 vfio: simplify the conditional statements in vfio_msi_enable
It's unnecessary to test against the specific return value of
VFIO_DEVICE_SET_IRQS, since any positive return is an error
indicating the number of vectors we should retry with.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-2-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-06 09:06:50 -06:00
Víctor Colombo
d41ccf6eea target/ppc: Remove msr_pr macro
msr_pr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-05-05 15:36:17 -03:00
Frederic Barrat
f657721187 ppc/xive: Update the state of the External interrupt signal
When pulling or pushing an OS context from/to a CPU, we should
re-evaluate the state of the External interrupt signal. Otherwise, we
can end up catching the External interrupt exception in hypervisor
mode, which is unexpected.

The problem is best illustrated with the following scenario:

1. an External interrupt is raised while the guest is on the CPU.

2. before the guest can ack the External interrupt, an hypervisor
interrupt is raised, for example the Hypervisor Decrementer or
Hypervisor Virtualization interrupt. The hypervisor interrupt forces
the guest to exit while the External interrupt is still pending.

3. the hypervisor handles the hypervisor interrupt. At this point, the
External interrupt is still pending. So it's very likely to be
delivered while the hypervisor is running. That's unexpected and can
result in an infinite loop where the hypervisor catches the External
interrupt, looks for an interrupt in its hypervisor queue, doesn't
find any, exits the interrupt handler with the External interrupt
still raised, repeat...

The fix is simply to always lower the External interrupt signal when
pulling an OS context. It means it needs to be raised again when
re-pushing the OS context. Fortunately, it's already the case, as we
now always call xive_tctx_ipb_update(), which will raise the signal if
needed.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220429071620.177142-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-05-05 15:36:17 -03:00
Frederic Barrat
a66257a287 ppc/xive: Always recompute the PIPR when pushing an OS context
The Post Interrupt Priority Register (PIPR) is not restored like the
other OS-context related fields of the TIMA when pushing an OS context
on the CPU. It's not needed because it can be calculated from the
Interrupt Pending Buffer (IPB), which is saved and restored. The PIPR
must therefore always be recomputed when pushing an OS context.

This patch fixes a path on P9 and P10 where it was not done. If there
was a pending interrupt when the OS context was pulled, the IPB was
saved correctly. When pushing back the context, the code in
xive_tctx_need_resend() was checking for a interrupt raised while the
context was not on the CPU, saved in the NVT. If one was found, then
it was merged with the saved IPB and the PIPR updated and everything
was fine. However, if there was no interrupt found in the NVT, then
xive_tctx_ipb_update() was not being called and the PIPR was not
updated. This patch fixes it by always calling xive_tctx_ipb_update().

Note that on P10 (xive2.c) and because of the above, there's no longer
any need to check the CPPR value so it can go away.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220429071620.177142-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-05-05 15:36:17 -03:00
Murilo Opsfelder Araujo
97252353c1 vhost-user: Use correct macro name TARGET_PPC64
The correct name of the macro is TARGET_PPC64.

Fixes: 27598393a2 ("Lift max memory slots limit imposed by vhost-user")
Reported-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Peter Turschmid <peter.turschm@nutanix.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220503180108.34506-1-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-05-05 15:36:16 -03:00
Richard Henderson
e91b899411 target-arm queue:
* Enable read access to performance counters from EL0
  * Enable SCTLR_EL1.BT0 for aarch64-linux-user
  * Refactoring of cpreg handling
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJzlJYZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rQXEACqtWhESD9ZJ0T1DfiWh7HX
 KXZuvB5C4kEdY8KXPJsdFM47KGMB29AI1pfqN5oRvalGG40ROM1HNTO44LSjKgUr
 b+aEq0bcbOJQuhfc5EPoh3b9wekowxlBYsH3Zq251J6ua6dRd1iqdeGXFIZbn02x
 RY5lXB2wgWh8LnF+qwoLiIrqJWsJ8PSOolyl0LrKjI3Z22UboK1Y5K0sbJBlavX4
 xKEyd4Af1Jq+1GcleSymAjcNF1iO+38w6rrFSgMWj+f3HSjKCk+MHU78rfqVNa88
 ESRjBj1x3c8kRzNzy+Q8ntJ5QzREvFDpUYBC9lvnoLKQ6xRJWDvvZQw2YJGsH8sB
 Xgg8fQ75iYEQdN4SHLWn24OwZpKuzTZ4QYm0d02GiAZCGXgAFEIKG62lBd3UJTAy
 6wTUdjuLv/KA+Lc3qdvmFfOVxfPh728VvFl55IoGXZv9FFrxvrluLEgr3TIje9W3
 0r1FcjtAuuTHzKiaf8UsmvMW9nR550L1xQ+uMY8GKQvQgSvkf050srVZS05GFItH
 DqCUv++hsyi0b44J377cUKkAEOdH/rhV20pvvfoJthRgmHLNN5LG61JI9eK9JXzl
 +AYpbxAC3R6f0dp6/31D0ZRhW7wcC/rt1EVK/iACVKoGo8hZf3lC64y2+3TVoApF
 DdCadVNnR9eUFWh1inGXKQ==
 =Q7ra
 -----END PGP SIGNATURE-----

Merge tag 'pull-target-arm-20220505' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * Enable read access to performance counters from EL0
 * Enable SCTLR_EL1.BT0 for aarch64-linux-user
 * Refactoring of cpreg handling

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJzlJYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rQXEACqtWhESD9ZJ0T1DfiWh7HX
# KXZuvB5C4kEdY8KXPJsdFM47KGMB29AI1pfqN5oRvalGG40ROM1HNTO44LSjKgUr
# b+aEq0bcbOJQuhfc5EPoh3b9wekowxlBYsH3Zq251J6ua6dRd1iqdeGXFIZbn02x
# RY5lXB2wgWh8LnF+qwoLiIrqJWsJ8PSOolyl0LrKjI3Z22UboK1Y5K0sbJBlavX4
# xKEyd4Af1Jq+1GcleSymAjcNF1iO+38w6rrFSgMWj+f3HSjKCk+MHU78rfqVNa88
# ESRjBj1x3c8kRzNzy+Q8ntJ5QzREvFDpUYBC9lvnoLKQ6xRJWDvvZQw2YJGsH8sB
# Xgg8fQ75iYEQdN4SHLWn24OwZpKuzTZ4QYm0d02GiAZCGXgAFEIKG62lBd3UJTAy
# 6wTUdjuLv/KA+Lc3qdvmFfOVxfPh728VvFl55IoGXZv9FFrxvrluLEgr3TIje9W3
# 0r1FcjtAuuTHzKiaf8UsmvMW9nR550L1xQ+uMY8GKQvQgSvkf050srVZS05GFItH
# DqCUv++hsyi0b44J377cUKkAEOdH/rhV20pvvfoJthRgmHLNN5LG61JI9eK9JXzl
# +AYpbxAC3R6f0dp6/31D0ZRhW7wcC/rt1EVK/iACVKoGo8hZf3lC64y2+3TVoApF
# DdCadVNnR9eUFWh1inGXKQ==
# =Q7ra
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 05 May 2022 04:10:46 AM CDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220505' of https://git.linaro.org/people/pmaydell/qemu-arm: (23 commits)
  target/arm: read access to performance counters from EL0
  target/arm: Add isar_feature_{aa64,any}_ras
  target/arm: Add isar predicates for FEAT_Debugv8p2
  target/arm: Remove HOST_BIG_ENDIAN ifdef in add_cpreg_to_hashtable
  target/arm: Reformat comments in add_cpreg_to_hashtable
  target/arm: Perform override check early in add_cpreg_to_hashtable
  target/arm: Hoist isbanked computation in add_cpreg_to_hashtable
  target/arm: Use bool for is64 and ns in add_cpreg_to_hashtable
  target/arm: Consolidate cpreg updates in add_cpreg_to_hashtable
  target/arm: Hoist computation of key in add_cpreg_to_hashtable
  target/arm: Merge allocation of the cpreg and its name
  target/arm: Store cpregs key in the hash table directly
  target/arm: Drop always-true test in define_arm_vh_e2h_redirects_aliases
  target/arm: Name CPSecureState type
  target/arm: Name CPState type
  target/arm: Change cpreg access permissions to enum
  target/arm: Avoid bare abort() or assert(0)
  target/arm: Reorg ARMCPRegInfo type field bits
  target/arm: Make some more cpreg data static const
  target/arm: Replace sentinels with ARRAY_SIZE in cpregs.h
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-05 11:30:33 -05:00
Richard Henderson
5809ac5709 target/arm: Replace sentinels with ARRAY_SIZE in cpregs.h
Remove a possible source of error by removing REGINFO_SENTINEL
and using ARRAY_SIZE (convinently hidden inside a macro) to
find the end of the set of regs being registered or modified.

The space saved by not having the extra array element reduces
the executable's .data.rel.ro section by about 9k.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-05-05 09:35:50 +01:00
Richard Henderson
cf7c6d1004 target/arm: Split out cpregs.h
Move ARMCPRegInfo and all related declarations to a new
internal header, out of the public cpu.h.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-05-05 09:35:50 +01:00
Richard Henderson
5d51042602 Block layer patches
- Fix and re-enable GLOBAL_STATE_CODE assertions
 - vhost-user: Fixes for VHOST_USER_ADD/REM_MEM_REG
 - vmdk: Fix reopening bs->file
 - coroutine: use QEMU_DEFINE_STATIC_CO_TLS()
 - docs/qemu-img: Fix list of formats which implement check
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmJyi+YRHGt3b2xmQHJl
 ZGhhdC5jb20ACgkQfwmycsiPL9aphxAAt0sXEOWlcIeU87NOk+V30rRiBup0K/HZ
 wqsE6e0EMbygmC2aS/xqNu3naQ/TMY6UaoVBWSpf0D3sK2GnWEJW8bjV05ObZBwp
 6QUgqljk1QAAVv0o2/nViAcV8mEW+OzZLveP+qxFRNlNGoJDsbGzWj939SHM13eu
 ZD+/GGs/qXL3Gxp6adhOBjxbXYjvxm13F3pVjoyAugjMSqoSuCI0eXu1xkwXNHSP
 /wqObH3dQSzIvEXfE/1BOp3ofZwvg+XzeZ6MM4I/lvHDZWuQBfCQcBYKL9mMNWGc
 ijFEeolWt7hER50ik4XPvBmbj0jU2nPXQwo1XcFeWX3MSoNsha2jCZsz4LqzadIN
 YijGQHmkfDRmG2LSoIGcgM7chdwj88K8pfMnrrTsVEB6Dl4QrK6FjXviL5mG+rcX
 5FbKpgRwm3fmtug7Ttpgm1LJQmwK5A3YPenPH+CC2FoK3Rje46ZoMwQR5PBuHvM1
 rg9RB01eGJQGrw5Rt3VFk7304O/yT2J5m96x6CMejx4CuGK78VpkBC54HixTTh0R
 nXxLLZdqawVqwrPP6sE02FEajM931///nhU6fuN/832m3bYUsfM8SZNVqJh5xoex
 SK8x/a5HnTIkp7kys3f4juc+jzb4Yvka8IBIZi/gqzoqf8POGKLBCTpEXa3lBWIT
 gnCCnWWEdgY=
 =ETW/
 -----END PGP SIGNATURE-----

Merge tag 'for-upstream' of git://repo.or.cz/qemu/kevin into staging

Block layer patches

- Fix and re-enable GLOBAL_STATE_CODE assertions
- vhost-user: Fixes for VHOST_USER_ADD/REM_MEM_REG
- vmdk: Fix reopening bs->file
- coroutine: use QEMU_DEFINE_STATIC_CO_TLS()
- docs/qemu-img: Fix list of formats which implement check

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmJyi+YRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9aphxAAt0sXEOWlcIeU87NOk+V30rRiBup0K/HZ
# wqsE6e0EMbygmC2aS/xqNu3naQ/TMY6UaoVBWSpf0D3sK2GnWEJW8bjV05ObZBwp
# 6QUgqljk1QAAVv0o2/nViAcV8mEW+OzZLveP+qxFRNlNGoJDsbGzWj939SHM13eu
# ZD+/GGs/qXL3Gxp6adhOBjxbXYjvxm13F3pVjoyAugjMSqoSuCI0eXu1xkwXNHSP
# /wqObH3dQSzIvEXfE/1BOp3ofZwvg+XzeZ6MM4I/lvHDZWuQBfCQcBYKL9mMNWGc
# ijFEeolWt7hER50ik4XPvBmbj0jU2nPXQwo1XcFeWX3MSoNsha2jCZsz4LqzadIN
# YijGQHmkfDRmG2LSoIGcgM7chdwj88K8pfMnrrTsVEB6Dl4QrK6FjXviL5mG+rcX
# 5FbKpgRwm3fmtug7Ttpgm1LJQmwK5A3YPenPH+CC2FoK3Rje46ZoMwQR5PBuHvM1
# rg9RB01eGJQGrw5Rt3VFk7304O/yT2J5m96x6CMejx4CuGK78VpkBC54HixTTh0R
# nXxLLZdqawVqwrPP6sE02FEajM931///nhU6fuN/832m3bYUsfM8SZNVqJh5xoex
# SK8x/a5HnTIkp7kys3f4juc+jzb4Yvka8IBIZi/gqzoqf8POGKLBCTpEXa3lBWIT
# gnCCnWWEdgY=
# =ETW/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 May 2022 09:21:26 AM CDT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]

* tag 'for-upstream' of git://repo.or.cz/qemu/kevin:
  coroutine-win32: use QEMU_DEFINE_STATIC_CO_TLS()
  coroutine: use QEMU_DEFINE_STATIC_CO_TLS()
  coroutine-ucontext: use QEMU_DEFINE_STATIC_CO_TLS()
  iotests/reopen-file: Test reopening file child
  block/vmdk: Fix reopening bs->file
  iotests: Add regression test for issue 945
  Revert "main-loop: Disable GLOBAL_STATE_CODE() assertions"
  qcow2: Do not reopen data_file in invalidate_cache
  block: Classify bdrv_get_flags() as I/O function
  vhost-user: Don't pass file descriptor for VHOST_USER_REM_MEM_REG
  libvhost-user: Fix extra vu_add/rem_mem_reg reply
  docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG
  qemu-img: properly list formats which have consistency check implemented

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-04 15:44:15 -05:00
Kevin Wolf
a81d8d4a72 vhost-user: Don't pass file descriptor for VHOST_USER_REM_MEM_REG
The spec clarifies now that QEMU should not send a file descriptor in a
request to remove a memory region. Change it accordingly.

For libvhost-user, this is a bug fix that makes it compatible with
rust-vmm's implementation that doesn't send a file descriptor. Keep
accepting, but ignoring a file descriptor for compatibility with older
QEMU versions.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220407133657.155281-4-kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-05-04 15:55:23 +02:00
David Miller
4f9b6c7ddb target/s390x: add S390_FEAT_VECTOR_ENH2 to qemu CPU model
[ dh: take care of compat machines ]

Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-13-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-04 08:47:19 +02:00