In Armv8.6, a new AArch32 ID register ID_DFR1 is defined; implement
it. We don't have any CPUs with features that they need to advertise
here yet, but plumbing in the ID register gives it the right name
when debugging and will help in future when we do add a CPU that
has non-zero ID_DFR1 fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-5-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In Armv8.6 a new AArch32 ID register ID_MMFR5 is defined.
Implement this; we want to be able to use it to report to
the guest that we implement FEAT_ETS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-4-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code that reads the AArch32 ID registers from KVM in
kvm_arm_get_host_cpu_features() does so almost but not quite in
encoding order. Move the read of ID_PFR2 down so it's really in
encoding order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the AArch32 ID register scheme, coprocessor registers with
encoding cp15, 0, c0, c{0-7}, {0-7} are all in the space covered by
what in v6 and v7 was called the "CPUID scheme", and are supposed to
RAZ if they're not allocated to a specific ID register. For our
pre-v8 CPUs we get this right, because the regdefs in
id_pre_v8_midr_cp_reginfo[] cover these RAZ requirements. However
for v8 we failed to put in the necessary patterns to cover this, so
we end up UNDEFing on everything we didn't have an ID register for.
This is a problem because in Armv8 some encodings in 0, c0, c3, {0-7}
are now being used for new ID registers, and guests might thus start
trying to read them. (We already have one of these: ID_PFR2.)
For v8 CPUs, we already have regdefs for 0, c0, c{0-2}, {0-7} (that
is, the space is completely allocated with no reserved spaces). Add
entries to v8_idregs[] covering 0, c0, c3, {0-7}:
* c3, {0-2} is the reserved AArch32 space corresponding to the
AArch64 MVFR[012]_EL1
* c3, {3,5,6,7} are reserved RAZ for both AArch32 and AArch64
(in fact some of these are given defined meanings in Armv8.6,
but we don't implement them yet)
* c3, 4 is ID_PFR2 (already defined)
We then programmatically add RAZ patterns for AArch32 for
0, c0, c{4..15}, {0-7}:
* c4-c7 are unused, and not shared with AArch64 (these
are the encodings corresponding to where the AArch64
specific ID registers live in the system register space)
* c8-c15 weren't required to RAZ in v6/v7, but v8 extends
the AArch32 reserved-should-RAZ space to cover these;
the equivalent area of the AArch64 sysreg space is not
defined as must-RAZ
Note that the architecture allows some registers in this space
to return an UNKNOWN value; we always return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In more recent Raspbian OS Linux kernels, the fb driver gives up
immediately if RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS fails or no
displays are reported.
This change simply always reports one display. It makes bcm2835_fb work
again with these more recent kernels.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Message-Id: <20220812143519.59134-1-Enrik.Berkhan@inka.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cortex A35 core and enable it for virt board.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220819002015.1663247-1-wuhaotsh@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I've used real timestamp and changing them one by one so they would
not be all equal.
Problem was noticed when using the example as a test case for Go
bindings.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-11-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The example return type has the wrong member name. Fix it.
Problem was noticed when using the example as a test case for Go
bindings.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-10-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The examples use "qcow2" driver with the wrong member name for
BlockdevRef alternate type. This patch changes all wrong member names
from "file" to "data-file" which is the correct member name in
BlockdevOptionsQcow2 for the BlockdevRef field.
Problem was noticed when using the example as a test case for Go
bindings.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-9-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output was missing ',' delimiter. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-8-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output is missing a ',' delimiter and it has an extra ending
curly bracket. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-7-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output has an extra ending curly bracket. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-6-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output is missing ',' delimiter. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-5-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output is missing closing curly brackets. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-4-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output has an extra ',' delimiter in member "websocket" and it
lacks it in "family" member. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-3-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output has an extra ',' delimiter. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-2-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Update [m|h]tinst CSR in interrupt handling
* Force disable extensions if priv spec version does not match
* fix shifts shamt value for rv128c
* move zmmul out of the experimental
* virt: pass random seed to fdt
* Add checks for supported extension combinations
* Upgrade OpenSBI to v1.1
* Fix typo and restore Pointer Masking functionality for RISC-V
* Add mask agnostic behaviour (rvv_ma_all_1s) for vector extension
* Add Zihintpause support
* opentitan: bump opentitan version
* microchip_pfsoc: fix kernel panics due to missing peripherals
* Remove additional priv version check for mcountinhibit
* virt machine device tree improvements
* Add xicondops in ISA entry
* Use official extension names for AIA CSRs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmMYUCUACgkQIeENKd+X
cFRpEQf/T1FFcGq3TZrEPmqMdFPUSb+SEJNgwYFfloqkNjB2HIFbd2tKWAE1Tgjr
esV00p7YPyox1Ct+fKdwSxDxRSN9OI56v+nI8ZFwluVu7vpChuTFmOHur8rNxl1T
8MZgP2kMxMOJSnyHCS2iV9AUFdTExS65DbmlAKzi5fpBtt9jYTPSXsI49MP8+Ku/
1gdv5ZF5BXDJsGs7xHvE92dRzQEVN+As64IjlknFHHpmCM1b+Ah3GekXUbKmBuDG
/NaZyZNPCYxdRmPm/D7k0SOMZSJ9sLyhXTetZ0ZpBxG1ioClX37yS5wn4NLsCz/2
fXrnML+MQFUKZ03AZ9lWvxcu7kXfWA==
=7mGD
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20220907' of https://github.com/alistair23/qemu into staging
First RISC-V PR for QEMU 7.2
* Update [m|h]tinst CSR in interrupt handling
* Force disable extensions if priv spec version does not match
* fix shifts shamt value for rv128c
* move zmmul out of the experimental
* virt: pass random seed to fdt
* Add checks for supported extension combinations
* Upgrade OpenSBI to v1.1
* Fix typo and restore Pointer Masking functionality for RISC-V
* Add mask agnostic behaviour (rvv_ma_all_1s) for vector extension
* Add Zihintpause support
* opentitan: bump opentitan version
* microchip_pfsoc: fix kernel panics due to missing peripherals
* Remove additional priv version check for mcountinhibit
* virt machine device tree improvements
* Add xicondops in ISA entry
* Use official extension names for AIA CSRs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmMYUCUACgkQIeENKd+X
# cFRpEQf/T1FFcGq3TZrEPmqMdFPUSb+SEJNgwYFfloqkNjB2HIFbd2tKWAE1Tgjr
# esV00p7YPyox1Ct+fKdwSxDxRSN9OI56v+nI8ZFwluVu7vpChuTFmOHur8rNxl1T
# 8MZgP2kMxMOJSnyHCS2iV9AUFdTExS65DbmlAKzi5fpBtt9jYTPSXsI49MP8+Ku/
# 1gdv5ZF5BXDJsGs7xHvE92dRzQEVN+As64IjlknFHHpmCM1b+Ah3GekXUbKmBuDG
# /NaZyZNPCYxdRmPm/D7k0SOMZSJ9sLyhXTetZ0ZpBxG1ioClX37yS5wn4NLsCz/2
# fXrnML+MQFUKZ03AZ9lWvxcu7kXfWA==
# =7mGD
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 07 Sep 2022 04:02:45 EDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20220907' of https://github.com/alistair23/qemu: (44 commits)
target/riscv: Update the privilege field for sscofpmf CSRs
hw/riscv: virt: Add PMU DT node to the device tree
target/riscv: Add few cache related PMU events
target/riscv: Simplify counter predicate function
target/riscv: Add sscofpmf extension support
target/riscv: Add vstimecmp support
target/riscv: Add stimecmp support
hw/intc: Move mtimer/mtimecmp to aclint
target/riscv: Use official extension names for AIA CSRs
target/riscv: Add xicondops in ISA entry
hw/core: fix platform bus node name
hw/riscv: virt: fix syscon subnode paths
hw/riscv: virt: fix the plic's address cells
hw/riscv: virt: fix uart node name
target/riscv: Remove additional priv version check for mcountinhibit
hw/riscv: microchip_pfsoc: fix kernel panics due to missing peripherals
hw/riscv: opentitan: bump opentitan version
target/riscv: Fix priority of csr related check in riscv_csrrw_check
hw/riscv: remove 'fdt' param from riscv_setup_rom_reset_vec()
target/riscv: Add Zihintpause support
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The sscofpmf extension was ratified as a part of priv spec v1.12.
Mark the csr_ops accordingly.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-6-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Qemu virt machine can support few cache events and cycle/instret counters.
It also supports counter overflow for these events.
Add a DT node so that OpenSBI/Linux kernel is aware of the virt machine
capabilities. There are some dummy nodes added for testing as well.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Qemu can monitor the following cache related PMU events through
tlb_fill functions.
1. DTLB load/store miss
3. ITLB prefetch miss
Increment the PMU counter in tlb_fill function.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All the hpmcounters and the fixed counters (CY, IR, TM) can be represented
as a unified counter. Thus, the predicate function doesn't need handle each
case separately.
Simplify the predicate function so that we just handle things differently
between RV32/RV64 and S/HS mode.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Sscofpmf ('Ss' for Privileged arch and Supervisor-level extensions,
and 'cofpmf' for Count OverFlow and Privilege Mode Filtering)
extension allows the perf to handle overflow interrupts and filtering
support. This patch provides a framework for programmable
counters to leverage the extension. As the extension doesn't have any
provision for the overflow bit for fixed counters, the fixed events
can also be monitoring using programmable counters. The underlying
counters for cycle and instruction counters are always running. Thus,
a separate timer device is programmed to handle the overflow.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vstimecmp CSR allows the guest OS or to program the next guest timer
interrupt directly. Thus, hypervisor no longer need to inject the
timer interrupt to the guest if vstimecmp is used. This was ratified
as a part of the Sstc extension.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
stimecmp allows the supervisor mode to update stimecmp CSR directly
to program the next timer interrupt. This CSR is part of the Sstc
extension which was ratified recently.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Historically, The mtime/mtimecmp has been part of the CPU because
they are per hart entities. However, they actually belong to aclint
which is a MMIO device.
Move them to the ACLINT device. This also emulates the real hardware
more closely.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The arch review of AIA spec is completed and we now have official
extension names for AIA: Smaia (M-mode AIA CSRs) and Ssaia (S-mode
AIA CSRs).
Refer, section 1.6 of the latest AIA v0.3.1 stable specification at
https://github.com/riscv/riscv-aia/releases/download/0.3.1-draft.32/riscv-interrupts-032.pdf)
Based on above, we update QEMU RISC-V to:
1) Have separate config options for Smaia and Ssaia extensions
which replace RISCV_FEATURE_AIA in CPU features
2) Not generate AIA INTC compatible string in virt machine
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220820042958.377018-1-apatel@ventanamicro.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
XVentanaCondOps is Ventana custom extension. Add
its extension entry in the ISA Ext array
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220816045408.1231135-1-rpathak@ventanamicro.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"platform" is not a valid name for a bus node in dt-schema, so warnings
can be see in dt-validate on a dump of the riscv virt dtb:
/stuff/qemu/qemu.dtb: platform@4000000: $nodename:0: 'platform@4000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
"platform-bus" is a valid name, so use that instead.
CC: Rob Herring <robh@kernel.org>
Fixes: 11d306b9df ("hw/arm/sysbus-fdt: helpers for platform bus nodes addition")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-5-mail@conchuod.ie
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The reset and poweroff features of the syscon were originally added to
top level, which is a valid path for a syscon subnode. Subsequently a
reorganisation was carried out while implementing NUMA in which the
subnodes were moved into the /soc node. As /soc is a "simple-bus", this
path is invalid, and so dt-validate produces the following warnings:
/stuff/qemu/qemu.dtb: soc: poweroff: {'value': [[21845]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-poweroff']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
/stuff/qemu/qemu.dtb: soc: reboot: {'value': [[30583]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-reboot']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
Move the syscon subnodes back to the top level and silence the warnings.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220810184612.157317-4-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 18df0b4695 ("hw/riscv: virt: Allow creating multiple NUMA sockets")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When optional AIA PLIC support was added the to the virt machine, the
address cells property was removed leading the issues with dt-validate
on a dump from the virt machine:
/stuff/qemu/qemu.dtb: plic@c000000: '#address-cells' is a required property
From schema: /stuff/linux/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
Add back the property to suppress the warning.
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-3-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"uart" is not a node name that complies with the dt-schema.
Change the node name to "serial" to ix warnings seen during
dt-validate on a dtbdump of the virt machine such as:
/stuff/qemu/qemu.dtb: uart@10000000: $nodename:0: 'uart@10000000' does not match '^serial(@.*)?$'
From schema: /stuff/linux/Documentation/devicetree/bindings/serial/8250.yaml
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-2-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 04331d0b56 ("RISC-V VirtIO Machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Booting using "Direct Kernel Boot" for PolarFire SoC & skipping u-boot
entirely is probably not advisable, but it does at least show signs of
life. Recent Linux kernel versions make use of peripherals that are
missing definitions in QEMU and lead to kernel panics. These issues
almost certain rear their head for other methods of booting, but I was
unable to figure out a suitable HSS version that is recent enough to
support these peripherals & works with QEMU.
With these peripherals added, booting a kernel with the following hangs
hangs waiting for the system controller's hwrng, but the kernel no
longer panics. With the Linux driver for hwrng disabled, it boots to
console.
qemu-system-riscv64 -M microchip-icicle-kit \
-m 2G -smp 5 \
-kernel $(vmlinux_bin) \
-dtb $(dtb)\
-initrd $(initramfs) \
-display none -serial null \
-serial stdio
More peripherals are added than strictly required to fix the panics in
the hopes of avoiding a replication of this problem in the future.
Some of the peripherals which are in the device tree for recent kernels
are implemented in the FPGA fabric. The eMMC/SD mux, which exists as
an unimplemented device is replaced by a wider entry. This updated
entry covers both the mux & the remainder of the FPGA fabric connected
to the MSS using Fabric Interrconnect (FIC) 3.
Link: https://github.com/polarfire-soc/icicle-kit-reference-design#fabric-memory-map
Link: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/SupportingCollateral/V1_4_Register_Map.zip
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220813135127.2971754-1-mail@conchuod.ie>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following patch updates opentitan to match the new configuration,
as per, lowRISC/opentitan@217a0168ba
Note: with this patch we now skip the usage of the opentitan
`boot_rom`. The Opentitan boot rom contains hw verification
for devies which we are currently not supporting in qemu. As of now,
the `boot_rom` has no major significance, however, would be good to
support in the future.
Tested by running utests from the latest tock [1]
(that supports this version of OT).
[1] https://github.com/tock/tock/pull/3056
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220812005229.358850-1-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Normally, riscv_csrrw_check is called when executing Zicsr instructions.
And we can only do access control for existed CSRs. So the priority of
CSR related check, from highest to lowest, should be as follows:
1) check whether Zicsr is supported: raise RISCV_EXCP_ILLEGAL_INST if not
2) check whether csr is existed: raise RISCV_EXCP_ILLEGAL_INST if not
3) do access control: raise RISCV_EXCP_ILLEGAL_INST or RISCV_EXCP_VIRT_
INSTRUCTION_FAULT if not allowed
The predicates contain parts of function of both 2) and 3), So they need
to be placed in the middle of riscv_csrrw_check
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220803123652.3700-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'fdt' param is not being used in riscv_setup_rom_reset_vec().
Simplify the API by removing it. While we're at it, remove the redundant
'return' statement at the end of function.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Vijai Kumar K <vijai@behindbytes.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added support for RISC-V PAUSE instruction from Zihintpause extension,
enabled by default.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Dao Lu <daolu@rivosinc.com>
Message-Id: <20220725034728.2620750-2-daolu@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec, mask agnostic behavior can be either kept as
undisturbed or set elements' bits to all 1s. To distinguish the
difference of mask policies, QEMU should be able to simulate the mask
agnostic behavior as "set mask elements' bits to all 1s".
There are multiple possibility for agnostic elements according to
v-spec. The main intent of this patch-set tries to add option that
can distinguish between mask policies. Setting agnostic elements to
all 1s allows QEMU to express this.
This commit adds option 'rvv_ma_all_1s' is added to enable the
behavior, it is default as disabled.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165570784143.17634.35095816584573691-10@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec, mask agnostic behavior can be either kept as
undisturbed or set elements' bits to all 1s. To distinguish the
difference of mask policies, QEMU should be able to simulate the mask
agnostic behavior as "set mask elements' bits to all 1s".
There are multiple possibility for agnostic elements according to
v-spec. The main intent of this patch-set tries to add option that
can distinguish between mask policies. Setting agnostic elements to
all 1s allows QEMU to express this.
This is the first commit regarding the optional mask agnostic
behavior. Follow-up commits will add this optional behavior
for all rvv instructions.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165570784143.17634.35095816584573691-1@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit fbf43c7dbf ("target/riscv: enable riscv kvm accel"),
KVM accelerator is supported on RISC-V. Let's document it.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220719082635.3741878-1-bin.meng@windriver.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
