This was accidentally omitted from 77cb0f5aaf "Split adb.c into adb.c, adb-mouse.c
and adb-kbd.c".
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu-system-ppcemb has been once split of qemu-system-ppc to support
CPU page sizes < 4096 for some of the embedded 4xx PowerPC CPUs.
However, there was hardly any OS available in the wild that really
used such small page sizes (Linux uses 4096 on PPC), so there is
no known recent use case for this separate build anymore. It's
rather cumbersome to maintain a separate set of config switches for
this, and it's wasting compile and test time of all the developers
who have to build all QEMU targets to verify that their changes did
not break anything.
Except for the small CPU page sizes, qemu-system-ppc can be used as
a full replacement for qemu-system-ppcemb since it contains all the
embedded 4xx PPC boards and CPUs, too. Thus let's start the deprecation
process for qemu-system-ppcemb to see whether somebody still needs
the small page sizes or whether we could finally remove this unloved
separate build.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaawAdAAoJECnFlngPa8qDvB4H/RkbG3qLNVyIj1LHQu9JA72p
gyzs8hZ7wAzLH+JljqRYPmcHsNnkLRM6O1ukTqDKbE3+0arkp4/SmLtIuHjCiV1B
QplONj39hVr578ZrgKQ1eIP0G285nWFeCUFC8aYFkLK6rJpYpKAu/FSFLrfel5SQ
so4w4d/AZK9k9DkFO16d7wW+UXacyuN+mf1SVSSM0ckuu6aKOuvAf6rVEIHdp4AM
BVI36wooFvaJZ4VCYEpm5XD5zAMRkkkhIOHzEQEiUhtLCOCg72JLD/GkhmjXoQU+
TuEyGTAGfoIrvQqcfewsCx/pcGWievdHeT4Qh4KqC9rMCPuYrz9HXmKxJNXw54c=
=x4JI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/edgar/tags/edgar/xilinx-next-2018-01-26.for-upstream' into staging
Xilinx queue
# gpg: Signature made Fri 26 Jan 2018 10:17:01 GMT
# gpg: using RSA key 0x29C596780F6BCA83
# gpg: Good signature from "Edgar E. Iglesias (Xilinx key) <edgar.iglesias@xilinx.com>"
# gpg: aka "Edgar E. Iglesias <edgar.iglesias@gmail.com>"
# Primary key fingerprint: AC44 FEDC 14F7 F1EB EDBF 4151 29C5 9678 0F6B CA83
* remotes/edgar/tags/edgar/xilinx-next-2018-01-26.for-upstream:
xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC
xlnx-zynqmp-pmu: Connect the IPI device to the PMU
xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device
xlnx-zynqmp-pmu: Connect the PMU interrupt controller
xlnx-pmu-iomod-intc: Add the PMU Interrupt controller
aarch64-softmmu.mak: Use an ARM specific config
xlnx-zynqmp-pmu: Add the CPU and memory
xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU
microblaze: boot.c: Don't try to find NULL file
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This is the initial version of the Inter Processor Interrupt device.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add the PMU IO Module Interrupt controller device.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
In preperation for having an ARM and MicroBlaze ZynqMP machine let's
split out the current ARM specific config options.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Connect the MicroBlaze CPU and the ROM and RAM memory regions.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The Xilinx ZynqMP SoC has two main processing systems in it. The ARM
processing system (which is already modeled in QEMU) and the MicroBlaze
Power Management Unit (PMU). This is the inital work for adding support
for the PMU.
The PMU susbsystem runs along side the ARM system on hardware, but due
to architecture limitations in QEMU the two instances are seperate for
the time being.
Let's follow the same setup we do with the ARM system, where there is an
SoC device and a ZCU102 board. Although the PMU is less board specific
we are still going to follow the same split as maybe in future we can
connect the PMU device to the ARM ZCU102 board. As the machine will be
fairly small let's keep them both together in one file.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Previously if no device tree was passed to microblaze_load_kernel() then
qemu_find_file() would try to find a NULL pointer. To avoid this put a
check around qemu_find_file().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Replace init() of CCIDCardClass with realize, then convert
ccid_card_init(), ccid_card_initfn() and it's callbacks to
take an Error** in ordor to report the error more clearly.
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180125171432.13554-2-f4bug@amsat.org
[PMD: fixed s->card assignation in ccid_card_realize()]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Because usb-storage creates an internal scsi device, we should propagate
options. We already do so for bootindex etc, but failed to take care of
share-rw. Fix it in an apparent way: add a new parameter to
scsi_bus_legacy_add_drive and pass in s->conf.share_rw.
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20180117005222.4781-1-famz@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The option have been marked as deprecated since QEMU 2.10, and so far
nobody complained that the host, serial, disk and net options are urgently
required anymore. So let's now get rid at least of this legacy pile, to
simplify the usb code quite a bit.
This patch removes the usbdevices host, serial, disk and net. These devices
use their own complicated parameter parsing mechanisms, so they are just
ugly to maintain, without real benefit for the users (the users can use the
corresponding "-device" parameters instead which have the same complexity
as the "-usbdevice" devices here).
Note that the other rather simple -usbdevice options (mouse, tablet, etc.)
are not removed yet (the code is really simple here, so it does not hurt
much to keep it), as well as the two devices "braille" and "bt" which are
easier to use with -usbdevice than with -device.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1515519171-20315-1-git-send-email-thuth@redhat.com
[kraxel] delete some usb_host_device_open() leftovers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* target/arm: Fix address truncation in 64-bit pagetable walks
* i.MX: Fix FEC/ENET receive functions
* target/arm: preparatory refactoring for SVE emulation
* hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
* hw/intc/arm_gic: Fix C_RPR value on idle priority
* hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
* hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
* hw/arm/virt: Check that the CPU realize method succeeded
* sdhci: fix a NULL pointer dereference due to uninitialized AddressSpace object
* xilinx_spips: Correct usage of an uninitialized local variable
* pl110: Implement vertical compare/next base interrupts
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aF9Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180125' into staging
target-arm queue:
* target/arm: Fix address truncation in 64-bit pagetable walks
* i.MX: Fix FEC/ENET receive functions
* target/arm: preparatory refactoring for SVE emulation
* hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
* hw/intc/arm_gic: Fix C_RPR value on idle priority
* hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
* hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
* hw/arm/virt: Check that the CPU realize method succeeded
* sdhci: fix a NULL pointer dereference due to uninitialized AddressSpace object
* xilinx_spips: Correct usage of an uninitialized local variable
* pl110: Implement vertical compare/next base interrupts
# gpg: Signature made Thu 25 Jan 2018 12:59:25 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180125: (21 commits)
pl110: Implement vertical compare/next base interrupts
xilinx_spips: Correct usage of an uninitialized local variable
sdhci: fix a NULL pointer dereference due to uninitialized AddresSpace object
hw/arm/virt: Check that the CPU realize method succeeded
hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
hw/intc/arm_gic: Fix C_RPR value on idle priority
hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
target/arm: Simplify fp_exception_el for user-only
target/arm: Hoist store to flags output in cpu_get_tb_cpu_state
target/arm: Move cpu_get_tb_cpu_state out of line
target/arm: Add ARM_FEATURE_SVE
vmstate: Add VMSTATE_UINT64_SUB_ARRAY
target/arm: Add aa{32, 64}_vfp_{dreg, qreg} helpers
target/arm: Change the type of vfp.regs
target/arm: Use pointers in neon tbl helper
target/arm: Use pointers in neon zip/uzp helpers
target/arm: Use pointers in crypto helpers
target/arm: Mark disas_set_insn_syndrome inline
i.MX: Fix FEC/ENET receive funtions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This inbuilt device contains a single 4-byte register, of which bit 24 is used
to power down the machine on a real Ultra 5.
The power device exists at offset 0x724000 on a real machine, but due to the
current configuration of the BARs in QEMU it must be located lower in PCI IO
space.
For the moment we place the power device at offset 0x7240 as a reminder of its
original location and raise the base PCI IO address from 0x4000 to 0x8000.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
This implements rudimentary support for interrupt generation on the
PL110. I am working on a new DRI/KMS driver for Linux and since that
uses the blanking interrupt, we need something to fire here. Without
any interrupt support Linux waits for a while and then gives ugly
messages about the vblank not working in the console (it does not
hang perpetually or anything though, DRI is pretty forgiving).
I solved it for now by setting up a timer to fire at 60Hz and pull
the interrupts for "vertical compare" and "next memory base"
at this interval. This works fine and fires roughly the same number
of IRQs on QEMU as on the hardware and leaves the console clean
and nice.
People who want to create more accurate emulation can probably work
on top of this if need be. It is certainly closer to the hardware
behaviour than what we have today anyway.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180123225654.5764-1-linus.walleij@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: folded long lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity found that the variable tx_rx in the function
xilinx_spips_flush_txfifo was being used uninitialized (CID 1383841). This
patch corrects this by always initializing tx_rx to zeros.
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20180124215708.30400-1-frasse.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were passing a NULL error pointer to the object_property_set_bool()
call that realizes the CPU object. This meant that we wouldn't detect
failure, and would plough blindly on to crash later trying to use a
NULL CPU object pointer. Detect errors and fail instead.
In particular, this will be necessary to detect the user error
of using "-cpu host" without "-enable-kvm" once we make the host
CPU type be registered unconditionally rather than only in
kvm_arch_init().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When C_CTRL.CBPR is 1, the Non-Secure view of C_BPR is altered:
- A Non-Secure read of C_BPR should return the BPR value plus 1,
saturated to 7,
- A Non-Secure write should be ignored.
Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-6-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed comment typo]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When determining the group priority of a group 1 IRQ, if C_CTRL.CBPR is
0, the non-secure BPR value is used. However, this value must be
incremented by one so that it matches the secure world number of
implemented priority bits (NS world has one less priority bit compared
to the Secure world).
Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-5-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: add assert, as the gicv3 code has]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When there is no active interrupts in the GIC, a read to the C_RPR
register should return the value of the "Idle priority", which is either
the maximum value an IRQ priority field can be set to, or 0xff.
Since the QEMU GIC model implements all the 8 priority bits, the Idle
priority is 0xff.
Internally, when there is no active interrupt, the running priority
value is 0x100. The gic_get_running_priority function returns an uint8_t
and thus, truncate this value to 0x00 when returning it. This is wrong since
a value of 0x00 correspond to the maximum possible priority.
This commit fixes the returned value when the internal value is 0x100.
Note that it is correct for the Non-Secure view to return 0xff even
though from the NS world point of view, only 7 priority bits are
implemented. The specification states that the Idle priority can be 0xff
even when not all the 8 priority bits are implemented. This has been
verified against a real GICv2 hardware on a Xilinx ZynqMP based board.
Regarding the ARM11MPCore version of the GIC, the specification is not
clear on that point, so this commit does not alter its behavior.
Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-4-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the GIC, when an IRQ is acknowledged, its state goes from "pending"
to:
- "active" if the corresponding IRQ pin has been de-asserted
- "active and pending" otherwise.
The GICv2 manual states that when a IRQ becomes active (or active and
pending), the GIC should either signal another (higher priority) IRQ to
the CPU if there is one, or de-assert the CPU IRQ pin.
The current implementation of the GIC in QEMU does not check if the
IRQ is already active when looking for pending interrupts with
sufficient priority in gic_update(). This can lead to signaling an
interrupt that is already active.
This usually happens when splitting priority drop and interrupt
deactivation. On priority drop, the IRQ stays active until deactivation.
If it becomes pending again, chances are that it will be incorrectly
selected as best_irq in gic_update().
This commit fixes this by checking if the IRQ is not already active when
looking for best_irq in gic_update().
Note that regarding the ARM11MPCore GIC version, the corresponding
manual is not clear on that point, but it has has no priority
drop/interrupt deactivation separation, so this case should not happen.
Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-3-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The actual imx_eth_enable_rx() function is buggy.
It updates s->regs[ENET_RDAR] after calling qemu_flush_queued_packets().
qemu_flush_queued_packets() is going to call imx_XXX_receive() which itself
is going to call imx_eth_enable_rx().
By updating s->regs[ENET_RDAR] after calling qemu_flush_queued_packets()
we end up updating the register with an outdated value which might
lead to disabling the receive function in the i.MX FEC/ENET device.
This patch change the place where the register update is done so that the
register value stays up to date and the receive function can keep
running.
Reported-by: Fyleo <fyleo45@gmail.com>
Tested-by: Fyleo <fyleo45@gmail.com>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20180113113445.2705-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Start a vm with qemu-kvm -enable-kvm -vnc :66 -smp 1 -m 1024 -hda
redhat_5.11.qcow2 -device pcnet -vga cirrus,
then use VNC client to connect to VM, and excute the code below in guest
OS will lead to qemu crash:
int main()
{
iopl(3);
srand(time(NULL));
int a,b;
while(1){
a = rand()%0x100;
b = 0x3c0 + (rand()%0x20);
outb(a,b);
}
return 0;
}
The above code is writing the registers of VGA randomly.
We can write VGA CRT controller registers index 0x0C or 0x0D
(which is the start address register) to modify the
the display memory address of the upper left pixel
or character of the screen. The address may be out of the
range of vga ram. So we should check the validation of memory address
when reading or writing it to avoid segfault.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-id: 20180111132724.13744-1-linzhecheng@huawei.com
Fixes: CVE-2018-5683
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaZyzMAAoJEH8JsnLIjy/WSOYP/jHffS2fOHtdLQU42G76HN0K
jkhSUE8cuKFzgxuJDJhv10AGsGZvDIaRhuumPIFArQkcEwsFDfd0UqzC5GkCnhfn
6frVPsRSUp9BqXqha1+6vOgVRobdBXPpS25ERfanTsbu3aPEDRnGpxmpMvyyimft
BTUnWNCg2lM6bojXrC6oy7MqUdi9p9PviMcQAfnN07SmGa+s6tS2Jc9znvZwgL06
o+oPukWVTAiub5qcH18BLA3T8xcCXWANdY9pUnNj7mXHoxg3kYzzYBArYDh6Kyju
BkSEML1kNcUACFAZ+LSqQpnoc8/5cP+jY5cOBGtUUgjZSns/xnAZxALltds0I4m3
fqQM68oOTX7squAYAaKYVYMirime6aa2OAn2afxPJildPp8uH4lNust95yiUyyJQ
oqA3zfAnP5FfmTnzjLG7smYlRUlcHp8eMPyOKHxp3BuqTMbWY5KQETyDMk3QVnZr
7fSFIdT4sRTdroKXUKHHu3RLFyCo77EBovxY2oUtt6v43qxQhLx0IFwW6jHrcLK9
ifLOr1CqdgwH/OU7h6rzoLcGLX5/eOTxwcCbU0kP2cx4E60VBXmSaDq9TiwQhbeV
4HteS+EP6R0WpCiAvsFl2aUd6iwDRHeYt0aKpYyUuTVrW2mfmLPaQP+tJLjEoaHF
H5HlbNWy2gFAB2uQtmOd
=gjNZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 23 Jan 2018 12:38:36 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (29 commits)
iotests: Disable some tests for compat=0.10
iotests: Split 177 into two parts for compat=0.10
iotests: Make 059 pass on machines with little RAM
iotests: Filter compat-dependent info in 198
iotests: Make 191 work with qcow2 options
iotests: Make 184 image-less
iotests: Make 089 compatible with compat=0.10
iotests: Fix 067 for compat=0.10
iotests: Fix 059's reference output
iotests: Fix 051 for compat=0.10
iotests: Fix 020 for vmdk
iotests: Skip 103 for refcount_bits=1
iotests: Forbid 020 for non-file protocols
iotests: Drop format-specific in _filter_img_info
iotests: Fix _img_info for backslashes
block/vmdk: Add blkdebug events
block/qcow: Add blkdebug events
qcow2: No persistent dirty bitmaps for compat=0.10
block/vmdk: Fix , instead of ; at end of line
qemu-iotests: Fix locking issue in 102
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
[for addition of trace-events to hw/pci-host]
Acked-by: Michael S. Tsirkin <mst@redhat.com>
This is the final stage in correcting the naming convention with respect to
sabre, APB and PBM. It is effectively a file rename from apb.c to sabre.c
along with touching up a few constants to remove the remaining references
to APB.
Note that as part of the rename process the configuration variable
CONFIG_PCI_APB is changed to CONFIG_PCI_SABRE.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
In order to reflect the previous change of TYPE_APB to TYPE_SABRE, update
the corresponding variable names to keep the terminology consistent.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Similarly rename the corresponding APBState typedef to SabreState.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
This is the proper name for the PBM host bridge as referenced in the Sun
documentation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
As hinted in the comment at the top of the file, the naming convention for the
APB types/QOM functions isn't correct. As a starting point we can at least
rename the APB type and related functions to improve the readability of apb.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Here we rename PBMPCIBridge to SimbaPCIBridge and the QOM type from
TYPE_PBM_PCI_BRIDGE to TYPE_SIMBA_PCI_BRIDGE in improve the clarity
of the device name.
Also touch up the relevant spots in apb.c and various other function
names as appropriate.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Move the QOM type and macros into a new include/hw/pci-bridge/simba.h
file, and add a new CONFIG_SIMBA Makefile.objs variable which is enabled
for sparc64-softmmu builds only.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
With the LEON3 IRQ controller IRQs can be acknowledged 2 ways:
* Explicitly by software writing to the CLEAR_OFFSET register
* Implicitly when the procesor is done running the trap handler attached
to the IRQ.
The actual IRQMP code only allows the implicit processor triggered IRQ ack.
If software write explicitly to the CLEAR_OFFSET register, this will clear
the pending bit in the register value but this will not lower the ongoing
raised IRQ with the processor. The IRQ will be kept raised to the LEON
processor until the related trap handler is run and the processor implicitly
ack the interrupt. So with the actual IRQMP code trap handler have to be run
even if the software has already done its job by clearing the pending bit.
This feature has been tested on another LEON3 simulator (tsim_leon3 from
Gaisler) and it turns out that the Qemu implementation is not equivalent to
the tsim one. In tsim, if software does clear a pending interrupt before
the related interrupt handler is triggered the said interrupt handler will
not be called.
This patch brings the Qemu IRQMP implementation in line with the tsim
implementation by allowing IRQ to be acknowledged by software only.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This reverts commit 4fe6d78b2e as it is
reported to break cleanup and migration.
Cc: Gal Hammer <ghammer@redhat.com>
Cc: Sitong Liu <siliu@redhat.com>
Cc: Xiaoling Gao <xiagao@redhat.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
This reverts commit 6f0bb23072.
This reverts commit f87d72f5c5 as that is
reported to break cleanup and migration.
Cc: Gal Hammer <ghammer@redhat.com>
Cc: Sitong Liu <siliu@redhat.com>
Cc: Xiaoling Gao <xiagao@redhat.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
