This patch allows the postcopy preempt channel to be created
asynchronously. The benefit is that when the connection is slow, we won't
take the BQL (and potentially block all things like QMP) for a long time
without releasing.
A function postcopy_preempt_wait_channel() is introduced, allowing the
migration thread to be able to wait on the channel creation. The channel
is always created by the main thread, in which we'll kick a new semaphore
to tell the migration thread that the channel has created.
We'll need to wait for the new channel in two places: (1) when there's a
new postcopy migration that is starting, or (2) when there's a postcopy
migration to resume.
For the start of migration, we don't need to wait for this channel until
when we want to start postcopy, aka, postcopy_start(). We'll fail the
migration if we found that the channel creation failed (which should
probably not happen at all in 99% of the cases, because the main channel is
using the same network topology).
For a postcopy recovery, we'll need to wait in postcopy_pause(). In that
case if the channel creation failed, we can't fail the migration or we'll
crash the VM, instead we keep in PAUSED state, waiting for yet another
recovery.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Manish Mishra <manish.mishra@nutanix.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185509.27311-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
To allow postcopy recovery, the ram fast load (preempt-only) dest QEMU thread
needs similar handling on fault tolerance. When ram_load_postcopy() fails,
instead of stopping the thread it halts with a semaphore, preparing to be
kicked again when recovery is detected.
A mutex is introduced to make sure there's no concurrent operation upon the
socket. To make it simple, the fast ram load thread will take the mutex during
its whole procedure, and only release it if it's paused. The fast-path socket
will be properly released by the main loading thread safely when there's
network failures during postcopy with that mutex held.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185506.27257-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch enables postcopy-preempt feature.
It contains two major changes to the migration logic:
(1) Postcopy requests are now sent via a different socket from precopy
background migration stream, so as to be isolated from very high page
request delays.
(2) For huge page enabled hosts: when there's postcopy requests, they can now
intercept a partial sending of huge host pages on src QEMU.
After this patch, we'll live migrate a VM with two channels for postcopy: (1)
PRECOPY channel, which is the default channel that transfers background pages;
and (2) POSTCOPY channel, which only transfers requested pages.
There's no strict rule of which channel to use, e.g., if a requested page is
already being transferred on precopy channel, then we will keep using the same
precopy channel to transfer the page even if it's explicitly requested. In 99%
of the cases we'll prioritize the channels so we send requested page via the
postcopy channel as long as possible.
On the source QEMU, when we found a postcopy request, we'll interrupt the
PRECOPY channel sending process and quickly switch to the POSTCOPY channel.
After we serviced all the high priority postcopy pages, we'll switch back to
PRECOPY channel so that we'll continue to send the interrupted huge page again.
There's no new thread introduced on src QEMU.
On the destination QEMU, one new thread is introduced to receive page data from
the postcopy specific socket (done in the preparation patch).
This patch has a side effect: after sending postcopy pages, previously we'll
assume the guest will access follow up pages so we'll keep sending from there.
Now it's changed. Instead of going on with a postcopy requested page, we'll go
back and continue sending the precopy huge page (which can be intercepted by a
postcopy request so the huge page can be sent partially before).
Whether that's a problem is debatable, because "assuming the guest will
continue to access the next page" may not really suite when huge pages are
used, especially if the huge page is large (e.g. 1GB pages). So that locality
hint is much meaningless if huge pages are used.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185504.27203-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Create a new socket for postcopy to be prepared to send postcopy requested
pages via this specific channel, so as to not get blocked by precopy pages.
A new thread is also created on dest qemu to receive data from this new channel
based on the ram_load_postcopy() routine.
The ram_load_postcopy(POSTCOPY) branch and the thread has not started to
function, and that'll be done in follow up patches.
Cleanup the new sockets on both src/dst QEMUs, meanwhile look after the new
thread too to make sure it'll be recycled properly.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185502.27149-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: With Peter's fix to quieten compiler warning on
start_migration
Firstly, postcopy already preempts precopy due to the fact that we do
unqueue_page() first before looking into dirty bits.
However that's not enough, e.g., when there're host huge page enabled, when
sending a precopy huge page, a postcopy request needs to wait until the whole
huge page that is sending to finish. That could introduce quite some delay,
the bigger the huge page is the larger delay it'll bring.
This patch adds a new capability to allow postcopy requests to preempt existing
precopy page during sending a huge page, so that postcopy requests can be
serviced even faster.
Meanwhile to send it even faster, bypass the precopy stream by providing a
standalone postcopy socket for sending requested pages.
Since the new behavior will not be compatible with the old behavior, this will
not be the default, it's enabled only when the new capability is set on both
src/dst QEMUs.
This patch only adds the capability itself, the logic will be added in follow
up patches.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185342.26794-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
zlib_send_prepare() compresses pages of a running VM. zlib does not
make any thread-safety guarantees with respect to changing deflate()
input concurrently with deflate() [1].
One can observe problems due to this with the IBM zEnterprise Data
Compression accelerator capable zlib [2]. When the hardware
acceleration is enabled, migration/multifd/tcp/plain/zlib test fails
intermittently [3] due to sliding window corruption. The accelerator's
architecture explicitly discourages concurrent accesses [4]:
Page 26-57, "Other Conditions":
As observed by this CPU, other CPUs, and channel
programs, references to the parameter block, first,
second, and third operands may be multiple-access
references, accesses to these storage locations are
not necessarily block-concurrent, and the sequence
of these accesses or references is undefined.
Mark Adler pointed out that vanilla zlib performs double fetches under
certain circumstances as well [5], therefore we need to copy data
before passing it to deflate().
[1] https://zlib.net/manual.html
[2] https://github.com/madler/zlib/pull/410
[3] https://lists.nongnu.org/archive/html/qemu-devel/2022-03/msg03988.html
[4] http://publibfp.dhe.ibm.com/epubs/pdf/a227832c.pdf
[5] https://lists.gnu.org/archive/html/qemu-devel/2022-07/msg00889.html
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220705203559.2960949-1-iii@linux.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add dirty page rate limit test if kernel support dirty ring,
The following qmp commands are covered by this test case:
"calc-dirty-rate", "query-dirty-rate", "set-vcpu-dirty-limit",
"cancel-vcpu-dirty-limit" and "query-vcpu-dirty-limit".
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <eed5b847a6ef0a9c02a36383dbdd7db367dd1e7e.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement dirtyrate calculation periodically basing on
dirty-ring and throttle virtual CPU until it reachs the quota
dirty page rate given by user.
Introduce qmp commands "set-vcpu-dirty-limit",
"cancel-vcpu-dirty-limit", "query-vcpu-dirty-limit"
to enable, disable, query dirty page limit for virtual CPU.
Meanwhile, introduce corresponding hmp commands
"set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit",
"info vcpu_dirty_limit" so the feature can be more usable.
"query-vcpu-dirty-limit" success depends on enabling dirty
page rate limit, so just add it to the list of skipped
command to ensure qmp-cmd-test run successfully.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <4143f26706d413dd29db0b672fe58b3d3fbe34bc.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Setup a negative feedback system when vCPU thread
handling KVM_EXIT_DIRTY_RING_FULL exit by introducing
throttle_us_per_full field in struct CPUState. Sleep
throttle_us_per_full microseconds to throttle vCPU
if dirtylimit is in service.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <977e808e03a1cef5151cae75984658b6821be618.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce kvm_dirty_ring_size util function to help calculate
dirty ring ful time.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <f9ce1f550bfc0e3a1f711e17b1dbc8f701700e56.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce the third method GLOBAL_DIRTY_LIMIT of dirty
tracking for calculate dirtyrate periodly for dirty page
rate limit.
Add dirtylimit.c to implement dirtyrate calculation periodly,
which will be used for dirty page rate limit.
Add dirtylimit.h to export util functions for dirty page rate
limit implementation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <5d0d641bffcb9b1c4cc3e323b6dfecb36050d948.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
abstract out dirty log change logic into function
global_dirty_log_change.
abstract out dirty page rate calculation logic via
dirty-ring into function vcpu_calculate_dirtyrate.
abstract out mathematical dirty page rate calculation
into do_calculate_dirtyrate, decouple it from DirtyStat.
rename set_sample_page_period to dirty_stat_wait, which
is well-understood and will be reused in dirtylimit.
handle cpu hotplug/unplug scenario during measurement of
dirty page rate.
export util functions outside migration.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <7b6f6f4748d5b3d017b31a0429e630229ae97538.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce cpu_list_generation_id to track cpu list generation so
that cpu hotplug/unplug can be detected during measurement of
dirty page rate.
cpu_list_generation_id could be used to detect changes of cpu
list, which is prepared for dirty page rate measurement.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <06e1f1362b2501a471dce796abb065b04f320fa5.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add a non-required argument 'CPUState' to kvm_dirty_ring_reap so
that it can cover single vcpu dirty-ring-reaping scenario.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <c32001242875e83b0d9f78f396fe2dcd380ba9e8.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add LoongArch flatted device tree, adding cpu device node, firmware cfg node,
pcie node into it, and create fdt rom memory region. Now fdt info is not
full since only uefi bios uses fdt, linux kernel does not use fdt.
Loongarch Linux kernel uses acpi table which is full in qemu virt
machine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-7-yangxiaojuan@loongson.cn>
[rth: Set TARGET_NEED_FDT, add fdt to meson.build]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Loongarch virt machine uses general hardware reduces acpi method, rather
than LS7A acpi device. Now only power management function is used in
acpi ged device, memory hotplug will be added later. Also acpi tables
such as RSDP/RSDT/FADT etc.
The acpi table has submited to acpi spec, and will release soon.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-6-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add smbios support for loongarch virt machine, and put them into fw_cfg
table so that bios can parse them quickly. The weblink of smbios spec:
https://www.dmtf.org/dsp/DSP0134, the version is 3.6.0.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-5-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are two situations to start system by kernel file. If exists bios
option, system will boot from loaded bios file, else system will boot
from hardcoded auxcode, and jump to kernel elf entry.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-4-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add uefi bios loading support, now only uefi bios is porting to
loongarch virt machine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-3-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add fw_cfg table for loongarch virt machine, including memmap table.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-2-yangxiaojuan@loongson.cn>
[rth: Replace fprintf with assert; drop unused return value;
initialize reserved slot to zero.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This includes:
- FCLASS.{S/D}
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220716085426.3098060-7-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should result zero when exception is invalid and operation is nan
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220716085426.3098060-4-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The muladd (inf,zero,nan) case sets InvalidOp and returns the
input value 'c', and prefer sNaN over qNaN, in c,a,b order.
Binary operations prefer sNaN over qNaN and a,b order.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220716085426.3098060-3-gaosong@loongson.cn>
[rth: Add specialization for pickNaN]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should config cpucfg[20] to set value for the scache's ways, sets,
and size arguments when loongarch cpu init. However, the old code
wirte 'sets argument' twice, so we change one of them to 'size argument'.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715064829.1521482-1-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The boundary size of cpucfg array should be 0 to ARRAY_SIZE(cpucfg)-1.
So, using index bigger than max boundary to access cpucfg[] must be
forbidden.
Fix coverity CID: 1489760
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715060740.1500628-6-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix out-of-bounds errors when access excp_names[] array. the valid
boundary size of excp_names should be 0 to ARRAY_SIZE(excp_names)-1.
However, the general code do not consider the max boundary.
Fix coverity CID: 1489758
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715060740.1500628-4-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix such errors:
1. We should not use 'unsigned long' type as argument when we use
find_first_bit(), and we use ctz64() to replace find_first_bit()
to fix this bug.
2. It is not standard to use '1ULL << irq' to generate a irq mask.
So, we replace it with 'MAKE_64BIT_MASK(irq, 1)'.
Fix coverity CID: 1489761 1489764 1489765
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220715060740.1500628-3-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cpu_model argument may already have the '-loongarch-cpu' suffix,
e.g. when using the default for the LS7A1000 machine. If that fails,
try again with the suffix. Validate that the object created by the
function is derived from the proper base class.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715060740.1500628-2-yangxiaojuan@loongson.cn>
[rth: Try without and then with the suffix, to avoid testsuite breakage.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the pre-packaged toolchain provided by Loongson via github.
Tested-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220704070824.965429-1-richard.henderson@linaro.org>
The patch adds "show_tabs" command line option for GTK ui similar to
"grab_on_hover". This option allows tabbed view mode to not have to be
enabled by hand at each start of the VM.
Signed-off-by: Felix "xq" Queißner <xq@random-projects.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220712133753.18937-1-xq@random-projects.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pcie host bridge has no io window on microvm,
so io reservations will not work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220701091516.43489-1-kraxel@redhat.com>
The D-Bus connection starts processing messages before QEMU has the time
to set the object manager server. This is causing dbus-display-test to
fail randomly with:
ERROR:../tests/qtest/dbus-display-test.c:68:test_dbus_display_vm:
assertion failed
(qemu_dbus_display1_vm_get_name(QEMU_DBUS_DISPLAY1_VM(vm)) ==
"dbus-test"): (NULL == "dbus-test") ERROR
Use the delayed message processing flag and method to avoid that
situation.
(the bus connection doesn't need a fix, as the initialization is done
synchronously)
Reported-by: Robinson, Cole <crobinso@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <20220609152647.870373-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* Fix broken build on Haiku
* Replace the term 'whitelist' in some files with a better one
* Some other minor test related fixes
-----BEGIN PGP SIGNATURE-----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=JuhN
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-07-19' of https://gitlab.com/thuth/qemu into staging
* Clean up tests/vm (remove obsolte VMs, upgrade Ubuntu 18.04 to 20.04 etc.)
* Fix broken build on Haiku
* Replace the term 'whitelist' in some files with a better one
* Some other minor test related fixes
# gpg: Signature made Tue 19 Jul 2022 07:55:26 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-07-19' of https://gitlab.com/thuth/qemu:
python/qemu/qmp/legacy: Replace 'returns-whitelist' with the correct type
util: Fix broken build on Haiku
Replace 'whitelist' with 'allow'
tests/unit: Replace g_memdup() by g_memdup2()
qtest/machine-none: Add LoongArch support
tests/vm: Remove docker cross-compile test from CentOS VM
tests/vm: add 1GB extra memory per core
tests/vm: remove duplicate 'centos' VM test
tests/vm: remove ubuntu.i386 VM test
tests/vm: upgrade Ubuntu 18.04 VM to 20.04
tests/vm: switch centos.aarch64 to CentOS 8 Stream
tests/vm: switch CentOS 8 to CentOS 8 Stream
tests/vm: use 'cp' instead of 'ln' for temporary vm images
qga: treat get-guest-fsinfo as "best effort"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmLVpoweHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfyMcH/AtKRIfDYrRd38OU
IdcCNaDpBekgDQP5uCJhm2rGC2clOsFe8WNxpKCk6bTLnMIz+GnAXBlwpYje5mE9
qOXlvCVHMfBHCh/z/QMvmVBOWfmaffsw4N9480wel9ofk+ElfS3aokscg0YEo2Rn
g7vmy4bs8iM56TaJJ3hRLDI3QzaywC7Q9X4RAHolB9O+8/bnZ880zKyIWPQZpn2Q
VpHIqnpA+gxsr6NA3D/HLEOd7gfuTeGBLwwKLiEwASBDPoUB4rpUsBcYffsHcMtv
oQFGq80Buo+z6spS64KQAm1nryjpAYXQkeLj8I8cnH3t6uVdNy4DQ48KhcziAWz7
4+i+Fv4=
=aBWi
-----END PGP SIGNATURE-----
Merge tag 'qemu-sparc-20220718' of https://github.com/mcayland/qemu into staging
qemu-sparc queue
# gpg: Signature made Mon 18 Jul 2022 19:29:32 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* tag 'qemu-sparc-20220718' of https://github.com/mcayland/qemu: (40 commits)
pckbd: remove legacy i8042_mm_init() function
ps2: remove unused legacy ps2_mouse_init() function
pckbd: don't use legacy ps2_mouse_init() function
ps2: remove unused legacy ps2_kbd_init() function
pckbd: don't use legacy ps2_kbd_init() function
pckbd: introduce new vmstate_kbd_mmio VMStateDescription for the I8042_MMIO device
lasips2: update VMStateDescription for LASIPS2 device
lasips2: don't use legacy ps2_mouse_init() function
lasips2: don't use legacy ps2_kbd_init() function
lasips2: switch register memory region to DEVICE_BIG_ENDIAN
lasips2: standardise on lp name for LASIPS2Port variables
lasips2: rename LASIPS2Port parent pointer to lasips2
lasips2: switch to using port-based IRQs
lasips2: add named input gpio to handle incoming port IRQs
lasips2: add named input gpio to port for downstream PS2 device IRQ
lasips2: introduce LASIPS2PortDeviceClass for the LASIPS2_PORT device
lasips2: introduce port IRQ and new lasips2_port_init() function
lasips2: rename LASIPS2Port irq field to birq
lasips2: introduce lasips2_mouse_port_class_init() and lasips2_mouse_port_realize()
lasips2: introduce lasips2_kbd_port_class_init() and lasips2_kbd_port_realize()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This legacy function is only used during the initialisation of the MIPS magnum
machine, so inline its functionality directly into mips_jazz_init() and then
remove it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-41-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that the legacy ps2_mouse_init() function is no longer used, it can be completely
removed along with its associated trace-event.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-40-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instantiate the PS2 mouse device within KBDState using
object_initialize_child() in i8042_initfn() and i8042_mmio_init() and realize
it in i8042_realizefn() and i8042_mmio_realize() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-39-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that the legacy ps2_kbd_init() function is no longer used, it can be completely
removed along with its associated trace-event.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-38-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instantiate the PS2 keyboard device within KBDState using
object_initialize_child() in i8042_initfn() and i8042_mmio_init() and realize
it in i8042_realizefn() and i8042_mmio_realize() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-37-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
