To simulate FM functionalities for initiating Dynamic Capacity Add
(Opcode 5604h) and Dynamic Capacity Release (Opcode 5605h) as in CXL spec
r3.1 7.6.7.6.5 and 7.6.7.6.6, we implemented two QMP interfaces to issue
add/release dynamic capacity extents requests.
With the change, we allow to release an extent only when its DPA range
is contained by a single accepted extent in the device. That is to say,
extent superset release is not supported yet.
1. Add dynamic capacity extents:
For example, the command to add two continuous extents (each 128MiB long)
to region 0 (starting at DPA offset 0) looks like below:
{ "execute": "qmp_capabilities" }
{ "execute": "cxl-add-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"selection-policy": "prescriptive",
"region": 0,
"extents": [
{
"offset": 0,
"len": 134217728
},
{
"offset": 134217728,
"len": 134217728
}
]
}
}
2. Release dynamic capacity extents:
For example, the command to release an extent of size 128MiB from region 0
(DPA offset 128MiB) looks like below:
{ "execute": "cxl-release-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"removal-policy":"prescriptive",
"region": 0,
"extents": [
{
"offset": 134217728,
"len": 134217728
}
]
}
}
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-12-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a migration state on src called "postcopy-recover-setup".
The new state will describe the intermediate step starting from when the
src QEMU received a postcopy recovery request, until the migration channels
are properly established, but before the recovery process take place.
The request came from Libvirt where Libvirt currently rely on the migration
state events to detect migration state changes. That works for most of the
migration process but except postcopy recovery failures at the beginning.
Currently postcopy recovery only has two major states:
- postcopy-paused: this is the state that both sides of QEMU will be in
for a long time as long as the migration channel was interrupted.
- postcopy-recover: this is the state where both sides of QEMU handshake
with each other, preparing for a continuation of postcopy which used to
be interrupted.
The issue here is when the recovery port is invalid, the src QEMU will take
the URI/channels, noticing the ports are not valid, and it'll silently keep
in the postcopy-paused state, with no event sent to Libvirt. In this case,
the only thing Libvirt can do is to poll the migration status with a proper
interval, however that's less optimal.
Considering that this is the only case where Libvirt won't get a
notification from QEMU on such events, let's add postcopy-recover-setup
state to mimic what we have with the "setup" state of a newly initialized
migration, describing the phase of connection establishment.
With that, postcopy recovery will have two paths to go now, and either path
will guarantee an event generated. Now the events will look like this
during a recovery process on src QEMU:
- Initially when the recovery is initiated on src, QEMU will go from
"postcopy-paused" -> "postcopy-recover-setup". Old QEMUs don't have
this event.
- Depending on whether the channel re-establishment is succeeded:
- In succeeded case, src QEMU will move from "postcopy-recover-setup"
to "postcopy-recover". Old QEMUs also have this event.
- In failure case, src QEMU will move from "postcopy-recover-setup" to
"postcopy-paused" again. Old QEMUs don't have this event.
This guarantees that Libvirt will always receive a notification for
recovery process properly.
One thing to mention is, such new status is only needed on src QEMU not
both. On dest QEMU, the state machine doesn't change. Hence the events
don't change either. It's done like so because dest QEMU may not have an
explicit point of setup start. E.g., it can happen that when dest QEMUs
doesn't use migrate-recover command to use a new URI/channel, but the old
URI/channels can be reused in recovery, in which case the old ports simply
can work again after the network routes are fixed up.
Add a new helper postcopy_is_paused() detecting whether postcopy is still
paused, taking RECOVER_SETUP into account too. When using it on both
src/dst, a slight change is done altogether to always wait for the
semaphore before checking the status, because for both sides a sem_post()
will be required for a recovery.
Cc: Jiri Denemark <jdenemar@redhat.com>
Cc: Prasad Pandit <ppandit@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Buglink: https://issues.redhat.com/browse/RHEL-38485
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add the direct-io migration parameter that tells the migration code to
use O_DIRECT when opening the migration stream file whenever possible.
This is currently only used with the mapped-ram migration that has a
clear window guaranteed to perform aligned writes.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
This is a counterpart to the HMP "info pic" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240610063518.50680-3-philmd@linaro.org>
add the Query Processing Library (QPL) compression method
Introduce the qpl as a new multifd migration compression method, it can
use In-Memory Analytics Accelerator(IAA) to accelerate compression and
decompression, which can not only reduce network bandwidth requirement
but also reduce host compression and decompression CPU overhead.
How to enable qpl compression during migration:
migrate_set_parameter multifd-compression qpl
There is no qpl compression level parameter added since it only supports
level one, users do not need to specify the qpl compression level.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
[fixed docs spacing in migration.json]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Commit 1f25c172f8 ("monitor: use aio_co_reschedule_self()") was a code
cleanup that uses aio_co_reschedule_self() instead of open coding
coroutine rescheduling.
Bug RHEL-34618 was reported and Kevin Wolf <kwolf@redhat.com> identified
the root cause. I missed that aio_co_reschedule_self() ->
qemu_get_current_aio_context() only knows about
qemu_aio_context/IOThread AioContexts and not about iohandler_ctx. It
does not function correctly when going back from the iohandler_ctx to
qemu_aio_context.
Go back to open coding the AioContext transitions to avoid this bug.
This reverts commit 1f25c172f8.
Cc: qemu-stable@nongnu.org
Buglink: https://issues.redhat.com/browse/RHEL-34618
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240506190622.56095-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most of the current 'query-sev' command is relevant to both legacy
SEV/SEV-ES guests and SEV-SNP guests, with 2 exceptions:
- 'policy' is a 64-bit field for SEV-SNP, not 32-bit, and
the meaning of the bit positions has changed
- 'handle' is not relevant to SEV-SNP
To address this, this patch adds a new 'sev-type' field that can be
used as a discriminator to select between SEV and SEV-SNP-specific
fields/formats without breaking compatibility for existing management
tools (so long as management tools that add support for launching
SEV-SNP guest update their handling of query-sev appropriately).
The corresponding HMP command has also been fixed up similarly.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by:Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-15-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP support relies on a different set of properties/state than the
existing 'sev-guest' object. This patch introduces the 'sev-snp-guest'
object, which can be used to configure an SEV-SNP guest. For example,
a default-configured SEV-SNP guest with no additional information
passed in for use with attestation:
-object sev-snp-guest,id=sev0
or a fully-specified SEV-SNP guest where all spec-defined binary
blobs are passed in as base64-encoded strings:
-object sev-snp-guest,id=sev0, \
policy=0x30000, \
init-flags=0, \
id-block=YWFhYWFhYWFhYWFhYWFhCg==, \
id-auth=CxHK/OKLkXGn/KpAC7Wl1FSiisWDbGTEKz..., \
author-key-enabled=on, \
host-data=LNkCWBRC5CcdGXirbNUV1OrsR28s..., \
guest-visible-workarounds=AA==, \
See the QAPI schema updates included in this patch for more usage
details.
In some cases these blobs may be up to 4096 characters, but this is
generally well below the default limit for linux hosts where
command-line sizes are defined by the sysconf-configurable ARG_MAX
value, which defaults to 2097152 characters for Ubuntu hosts, for
example.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (for QAPI schema)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-8-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently all SEV/SEV-ES functionality is managed through a single
'sev-guest' QOM type. With upcoming support for SEV-SNP, taking this
same approach won't work well since some of the properties/state
managed by 'sev-guest' is not applicable to SEV-SNP, which will instead
rely on a new QOM type with its own set of properties/state.
To prepare for this, this patch moves common state into an abstract
'sev-common' parent type to encapsulate properties/state that are
common to both SEV/SEV-ES and SEV-SNP, leaving only SEV/SEV-ES-specific
properties/state in the current 'sev-guest' type. This should not
affect current behavior or command-line options.
As part of this patch, some related changes are also made:
- a static 'sev_guest' variable is currently used to keep track of
the 'sev-guest' instance. SEV-SNP would similarly introduce an
'sev_snp_guest' static variable. But these instances are now
available via qdev_get_machine()->cgs, so switch to using that
instead and drop the static variable.
- 'sev_guest' is currently used as the name for the static variable
holding a pointer to the 'sev-guest' instance. Re-purpose the name
as a local variable referring the 'sev-guest' instance, and use
that consistently throughout the code so it can be easily
distinguished from sev-common/sev-snp-guest instances.
- 'sev' is generally used as the name for local variables holding a
pointer to the 'sev-guest' instance. In cases where that now points
to common state, use the name 'sev_common'; in cases where that now
points to state specific to 'sev-guest' instance, use the name
'sev_guest'
In order to enable kernel-hashes for SNP, pull it from
SevGuestProperties to its parent SevCommonProperties so
it will be available for both SEV and SNP.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-5-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'vcpu' fields are deprecated since commit 5485e52a33
("qapi: make the vcpu parameters deprecated for 8.1"),
time to remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240530071548.20074-3-philmd@linaro.org>
The MEM_UNPLUG_ERROR event is deprecated since commit d43f1670c7
("qapi/qdev.json: add DEVICE_UNPLUG_GUEST_ERROR QAPI event"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240530071548.20074-2-philmd@linaro.org>
Using -fsanitize=undefined with Clang v18 causes an error if function
pointers are casted:
qapi/qapi-clone-visitor.c:188:5: runtime error: call to function visit_type_SocketAddress through pointer to incorrect function type 'bool (*)(struct Visitor *, const char *, void **, struct Error **)'
/tmp/qemu-ubsan/qapi/qapi-visit-sockets.c:487: note: visit_type_SocketAddress defined here
#0 0x5642aa2f7f3b in qapi_clone qapi/qapi-clone-visitor.c:188:5
#1 0x5642aa2c8ce5 in qio_channel_socket_listen_async io/channel-socket.c:285:18
#2 0x5642aa2b8903 in test_io_channel_setup_async tests/unit/test-io-channel-socket.c:116:5
#3 0x5642aa2b8204 in test_io_channel tests/unit/test-io-channel-socket.c:179:9
#4 0x5642aa2b8129 in test_io_channel_ipv4 tests/unit/test-io-channel-socket.c:323:5
...
It also prevents enabling the strict mode of CFI which is currently
disabled with -fsanitize-cfi-icall-generalize-pointers.
The problematic casts are necessary to pass visit_type_T() and
visit_type_T_members() as callbacks to qapi_clone() and qapi_clone_members(),
respectively. Open-code these two functions to avoid the callbacks, and
thus the type casts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2346
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240524-xkb-v4-3-2de564e5c859@daynix.com>
[thuth: Improve commit message according to Markus' suggestions]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a parameter that enables discard-after-copy. That is mostly useful
in "push backup with fleecing" scheme, when source is snapshot-access
format driver node, based on copy-before-write filter snapshot-access
API:
[guest] [snapshot-access] ~~ blockdev-backup ~~> [backup target]
| |
| root | file
v v
[copy-before-write]
| |
| file | target
v v
[active disk] [temp.img]
In this case discard-after-copy does two things:
- discard data in temp.img to save disk space
- avoid further copy-before-write operation in discarded area
Note that we have to declare WRITE permission on source in
copy-before-write filter, for discard to work. Still we can't take it
unconditionally, as it will break normal backup from RO source. So, we
have to add a parameter and pass it thorough bdrv_open flags.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240313152822.626493-5-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add a new QAPI event for VFIO migration. This event will be emitted when
a VFIO device changes its migration state, for example, during migration
or when stopping/starting the guest.
This event can be used by management applications to get updates on the
current state of the VFIO device for their own purposes.
Note that this new event is introduced since VFIO devices have a unique
set of migration states which cannot be described as accurately by other
existing events such as run state or migration status.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Retain a list of deprecated features disjoint from any particular
CPU model. A query-cpu-model-expansion reply will now provide a list of
properties (i.e. features) that are flagged as deprecated. Example:
{
"return": {
"model": {
"name": "z14.2-base",
"deprecated-props": [
"bpb",
"csske"
],
"props": {
"pfmfi": false,
"exrl": true,
...a lot more props...
"skey": false,
"vxpdeh2": false
}
}
}
}
It is recommended that s390 guests operate with these features
explicitly disabled to ensure compatibility with future hardware.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240429191059.11806-2-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'compress' migration capability enables the old compression code
which has shown issues over the years and is thought to be less stable
and tested than the more recent multifd-based compression. The old
compression code has been deprecated in 8.2 and now is time to remove
it.
Deprecation commit 864128df46 ("migration: Deprecate old compression
method").
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block migration has been considered obsolete since QEMU 8.2 in
favor of the more flexible storage migration provided by the
blockdev-mirror driver. Two releases have passed so now it's time to
remove it.
Deprecation commit 66db46ca83 ("migration: Deprecate block
migration").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block migration is considered obsolete and has been deprecated in
8.2. Remove the migrate command option that enables it. This only
affects the QMP and HMP commands, the feature can still be accessed by
setting the migration 'block' capability. The whole feature will be
removed in a future patch.
Deprecation commit 8846b5bfca ("migration: migrate 'blk' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block incremental option for block migration has been deprecated
in 8.2 in favor of using the block-mirror feature. Remove it now.
Deprecation commit 40101f320d ("migration: migrate 'inc' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The 'skipped' field of the MigrationStats struct has been deprecated
in 8.1. Time to remove it.
Deprecation commit 7b24d32634 ("migration: skipped field is really
obsolete.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Now we do set MIGRATION_FAILED state, but don't give a chance to
orchestrator to query migration state and get the error.
Let's provide a possibility for QMP-based orchestrators to get an error
like with outgoing migration.
For hmp_migrate_incoming(), let's enable the new behavior: HMP is not
and ABI, it's mostly intended to use by developer and it makes sense
not to stop the process.
For x-exit-preconfig, let's keep the old behavior:
- it's called from init(), so here we want to keep current behavior by
default
- it does exit on error by itself as well
So, if we want to change the behavior of x-exit-preconfig, it should be
another patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add module-id in CpuInstanceProperties, to locate the CPU with module
level.
Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240424154929.1487382-4-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add "modules" parameter parsing support in -smp.
Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240424154929.1487382-3-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To control that creating new machine type doesn't affect the previous
types (their compat_props) and to check complex compat_props inheritance
we need qmp command to print machine type compatibility properties.
This patch adds the ability to get list of all the compat_props of the
corresponding supported machines for their comparison via new optional
argument of "query-machines" command. Since information on compatibility
properties can increase the command output by a factor of 40, add an
argument to enable it, default off.
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240318213550.155573-3-davydov-max@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released in v8.2.
Remove:
- PVRDMA device
- generated vmw_pvrdma/ directory from linux-headers
- rdmacm-mux tool from contrib/
Cc: Yuval Shaia <yuval.shaia.ml@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240328130255.52257-2-philmd@linaro.org>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
Address the comment added in commit 4629ed1e98
("qerror: Finally unused, clean up"), from 2015:
/*
* These macros will go away, please don't use
* in new code, and do not add new ones!
*/
Mechanical transformation using the following
coccinelle semantic patch:
@match@
expression errp;
expression param;
constant value;
@@
error_setg(errp, QERR_INVALID_PARAMETER_TYPE, param, value);
@script:python strformat depends on match@
value << match.value;
fixedfmt; // new var
@@
fixedfmt = f'"Invalid parameter type for \'%s\', expected: {value[1:-1]}"'
coccinelle.fixedfmt = cocci.make_ident(fixedfmt)
@replace@
expression match.errp;
expression match.param;
constant match.value;
identifier strformat.fixedfmt;
@@
- error_setg(errp, QERR_INVALID_PARAMETER_TYPE, param, value);
+ error_setg(errp, fixedfmt, param);
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312141343.3168265-7-armbru@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Address the comment added in commit 4629ed1e98
("qerror: Finally unused, clean up"), from 2015:
/*
* These macros will go away, please don't use
* in new code, and do not add new ones!
*/
Mechanical transformation using:
$ sed -i -e "s/QERR_INVALID_PARAMETER,/\"Invalid parameter '%s'\",/" \
$(git grep -lw QERR_INVALID_PARAMETER)
Manually simplify qemu_opts_create(), and remove the macro definition
in include/qapi/qmp/qerror.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312141343.3168265-6-armbru@redhat.com>
QEMU will currently automatically make use of the KVM_SEV_INIT2 API for
initializing SEV and SEV-ES guests verses the older
KVM_SEV_INIT/KVM_SEV_ES_INIT interfaces.
However, the older interfaces will silently avoid sync'ing FPU/XSAVE
state to the VMSA prior to encryption, thus relying on behavior and
measurements that assume the related fields to be allow zero.
With KVM_SEV_INIT2, this state is now synced into the VMSA, resulting in
measurements changes and, theoretically, behaviorial changes, though the
latter are unlikely to be seen in practice.
To allow a smooth transition to the newer interface, while still
providing a mechanism to maintain backward compatibility with VMs
created using the older interfaces, provide a new command-line
parameter:
-object sev-guest,legacy-vm-type=true,...
and have it default to false.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240409230743.962513-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's document the parameters of these commands, so we can remove them
from the "documentation-exceptions" list.
While at it, extend the "Returns:" documentation as well, fixing a wrong
use of CpuModelBaselineInfo vs. CpuModelCompareInfo for
query-cpu-model-comparison.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Philippe Mathieu-Daudé" <philmd@linaro.org>
Cc: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240325150141.342720-1-david@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Punctuation tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Most of fields have no description at all. Let's fix that. Still, no
reason to place here more detailed descriptions of what these
structures are, as we have public Qcow2 format specification.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240325120054.2693236-1-vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Capitalize "QEMU", update qapi/pragma.json]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240325104504.1358734-1-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Update qapi/pragma.json]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For legibility, wrap text paragraphs so every line is at most 70
characters long.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the refilled
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-11-armbru@redhat.com>
Documentation generated for the arguments of MEMORY_FAILURE looks like
"recipient": "MemoryFailureRecipient"
recipient is defined as "MemoryFailureRecipient".
"action": "MemoryFailureAction"
action that has been taken. action is defined as
"MemoryFailureAction".
"flags": "MemoryFailureFlags"
flags for MemoryFailureAction. action is defined as
"MemoryFailureFlags".
The "action is defined as ..." are redundant. Drop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-10-armbru@redhat.com>
Commit d23055b8db (qapi: Require descriptions and tagged sections to
be indented) indented add_client's example too much. Revert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-5-armbru@redhat.com>
[Move a stray hunk to the later patch it belongs to]
Commit a937b6aa73 (qapi: Reformat doc comments to conform to current
conventions) reflowed some text that should have been left alone.
Revert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-4-armbru@redhat.com>
