Currently when user specifies more slots than allowed max of
SPAPR_MAX_RAM_SLOTS (32), we error out like this:
qemu-system-ppc64: unsupported amount of memory slots: 64
Let the user know about the max allowed slots like this:
qemu-system-ppc64: Specified number of memory slots 64 exceeds max supported 32
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently PowerPC kernel doesn't allow hot-adding memory to memory-less
node, but instead will silently add the memory to the first node that has
some memory. This causes two unexpected behaviours for the user.
- Memory gets hotplugged to a different node than what the user specified.
- Since pc-dimm subsystem in QEMU still thinks that memory belongs to
memory-less node, a reboot will set things accordingly and the previously
hotplugged memory now ends in the right node. This appears as if some
memory moved from one node to another.
So until kernel starts supporting memory hotplug to memory-less
nodes, just prevent such attempts upfront in QEMU.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make use of pc-dimm infrastructure to support memory hotplug
for PowerPC.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The hash table size is dependent on ram_size, but since with hotplug
the memory can grow till maxram_size. Hence make hash table size dependent
on maxram_size.
This allows to hotplug huge amounts of memory to the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Parse ibm,architecture.vec table obtained from the guest and enable
memory node configuration via ibm,dynamic-reconfiguration-memory if guest
supports it. This is in preparation to support memory hotplug for
sPAPR guests.
This changes the way memory node configuration is done. Currently all
memory nodes are built upfront. But after this patch, only memory@0 node
for RMA is built upfront. Guest kernel boots with just that and rest of
the memory nodes (via memory@XXX or ibm,dynamic-reconfiguration-memory)
are built when guest does ibm,client-architecture-support call.
Note: This patch needs a SLOF enhancement which is already part of
SLOF binary in QEMU.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Enable memory hotplug for pseries 2.4 and add LMB DR connectors.
With memory hotplug, enforce RAM size, NUMA node memory size and maxmem
to be a multiple of SPAPR_MEMORY_BLOCK_SIZE (256M) since that's the
granularity in which LMBs are represented and hot-added.
LMB DR connectors will be used by the memory hotplug code.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[spapr_drc_reset implementation]
[since this missed the 2.4 cutoff, changing to only enable for 2.5]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
sPAPR uses hard coded limit of maximum 255 supported CPUs which is
exactly the same as QEMU-wide limit which is MAX_CPUMASK_BITS and also
defined as 255.
This makes use of a global CPU number limit for the "pseries" machine.
In order to anticipate future increase of the MAX_CPUMASK_BITS
(or to help debugging large systems), this also bumps the FDT_MAX_SIZE
limit from 256K to 1M assuming that 1 CPU core needs roughly 512 bytes
in the device tree so the new limit can cover up to 2048 CPU cores.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The dynamic reconfiguration (hotplug) code for the pseries machine type
uses a "DR connector" QOM object for each resource it will be possible
to hotplug. Each of these is added to its owner using
object_property_add_child(owner, "dr-connector[*], ...);
That works ok, mostly, but it means that the property indices are
arbitrary, depending on the order in which the connectors are constructed.
That might line up to something useful, but it doesn't have to.
It will get worse once we add hotplug RAM support. That will add a DR
connector object for every 256MB of potential memory. So if maxmem=2T,
for example, there are 8192 objects under the same parent.
The QOM interfaces aren't really designed for this. In particular
object_property_add() with [*] has O(n^2) time complexity (in the number of
existing children): first it has a linear search through array indices to
find a free slot, each of which is attempted to a recursive call to
object_property_add() with a specific [N]. Those calls are O(n) because
there's a linear search through all properties to check for duplicates.
By using a meaningful index value, which we already know is unique we can
avoid the [*] special behaviour. That lets us reduce the total time for
creating the DR objects from O(n^3) to O(n^2).
O(n^2) is still kind of crappy, but it's enough to reduce the startup time
of qemu (with in-progress memory hotplug support) with maxmem=2T from ~20
minutes to ~4 seconds.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Certain methods in sPAPRDRConnector objects are only ever called by
RTAS and in many cases are responsible for the logic that determines
the RTAS return codes.
Rather than having a level of indirection requiring RTAS code to
re-interpret return values from such methods to determine the
appropriate return code, just pass them through directly.
This requires changing method return types to uint32_t to match the
type of values currently passed to RTAS helpers.
In the case of read accesses like drc->entity_sense() where we weren't
previously reporting any errors, just the read value, we modify the
function to return RTAS return code, and pass the read value back via
reference.
Suggested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Initialize a hotplug memory region under which all the hotplugged
memory is accommodated. Also enable memory hotplug by setting
CONFIG_MEM_HOTPLUG.
Modelled on i386 memory hotplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Logical resources start with allocation-state:UNUSABLE /
isolation-state:ISOLATED. During hotplug, guests will transition
them to allocation-state:USABLE, and then to
isolation-state:UNISOLATED.
For cases where we cannot transition to allocation-state:USABLE,
in this case due to no device/resource being association with
the logical DRC, we should return an error -3.
For physical DRCs, we default to allocation-state:USABLE and stay
there, so in this case we should report an error -3 when the guest
attempts to make the isolation-state:ISOLATED transition for a DRC
with no device associated.
These are as documented in PAPR 2.7, 13.5.3.4.
We also ensure allocation-state:USABLE when the guest attempts
transition to isolation-state:UNISOLATED to deal with misbehaving
guests attempting to bring online an unallocated logical resource.
This is as documented in PAPR 2.7, 13.7.
Currently we implement no such error logic. Fix this by handling
these error cases as PAPR defines.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PAPR requires ibm,req#msi and ibm,req#msi-x to be present in the
device node to define the number of msi/msi-x interrupts the device
supports, respectively.
Currently we have ibm,req#msi-x hardcoded to a non-sensical constant
that happens to be 2, and are missing ibm,req#msi entirely. The result
of that is that msi-x capable devices get limited to 2 msi-x
interrupts (which can impact performance), and msi-only devices likely
wouldn't work at all. Additionally, if devices expect a minimum that
exceeds 2, the guest driver may fail to load entirely.
SLOF still owns the generation of these properties at boot-time
(although other device properties have since been offloaded to QEMU),
but for hotplugged devices we rely on the values generated by QEMU
and thus hit the limitations above.
Fix this by generating these properties in QEMU as expected by guests.
In the future it may make sense to modify SLOF to pass through these
values directly as we do with other props since we're duplicating SLOF
code.
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For setting debug watchpoints, sPAPR guests use H_SET_MODE hypercall.
The existing QEMU H_SET_MODE handler does not support this but
the KVM handler in HV KVM does. However it is not enabled.
This enables the in-kernel H_SET_MODE handler which handles:
- Completed Instruction Address Breakpoint Register
- Watch point 0 registers.
The rest is still handled in QEMU.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The device tree presented to pseries machine type guests includes an
ibm,chip-id property which gives essentially the socket number of each
vcpu core (individual vcpu threads don't get a node in the device
tree).
To calculate this, it uses a vcpus_per_socket variable computed as
(smp_cpus / #sockets). This is correct for the usual case where
smp_cpus == smp_threads * smp_cores * #sockets.
However, you can start QEMU with the number of cores and threads
mismatching the total number of vcpus (whether that _should_ be
permitted is a topic for another day). It's a bit hard to say what
the "real" number of vcpus per socket here is, but for most purposes
(smp_threads * smp_cores) will more meaningfully match how QEMU
behaves with respect to socket boundaries.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The changes are:
1. GPT support;
2. Much faster VGA support.
The full changelog is:
> Add missing half word access case to _FASTRMOVE and _FASTMOVE
> Remove unused RMOVE64 stub
> fbuffer: Implement RFILL as an accelerated primitive
> fbuffer: Implement MRMOVE as an accelerated primitive
> fbuffer: Precalculate line length in bytes
> terminal: Disable the terminal-write trace by default
> boot: remove trailing ":" in the bootpath
> ci: implement boot client interface
> boot: bootpath should be complete device path
> fbuffer: Use a smaller cursor
> fbuffer: Improve invert-region helper
> usb-hid: Caps is not always shift
> cas: Increase FDT buffer size to accomodate larger ibm, cas node properties
> README: Update with patch submittion note
> disk-label: add support for booting from GPT FAT partition
> disk-label: introduce helper to check fat filesystem
> introduce 8-byte LE helpers
> disk-label: simplify gpt-prep-partition? routine
> fbuffer: introduce the invert-region-x helper
> fbuffer: introduce the invert-region helper
> fbuffer: simplify address computations in fb8-toggle-cursor
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a device is hotplugged, attach() sets "configured" to
false, waiting an action from the OS to configure it and then
to call ibm,configure-connector. On ibm,configure-connector,
the hypervisor sets "configured" to true.
In case of coldplugged device, attach() sets "configured" to
false, but firmware and OS never call the ibm,configure-connector
in this case, so it remains set to false.
It could be harmless, but when we unplug a device, hypervisor
waits the device becomes configured because for it, a not configured
device is a device being configured, so it waits the end of configuration
to unplug it... and it never happens, so it is never unplugged.
This patch set by default coldplugged device to "configured=true",
hotplugged device to "configured=false".
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This introduces rtas_ldq() to load 64-bits parameter from continuous
two 4-bytes memory chunk of RTAS parameter buffer, to simplify the
code.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If drmgr is used in the guest to hotplug a device before a device_add
has been issued via the QEMU monitor, QEMU segfaults in configure_connector
call. This occurs due to accessing of NULL FDT which otherwise would have
been created and associated with the DRC during device_add command.
Check for NULL FDT and return failure from configure_connector call.
As per PAPR+, an error value of -9003 seems appropriate for this failure.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To see the output of the hcall_dprintf statements, you currently have
to enable the DEBUG_SPAPR_HCALLS macro in include/hw/ppc/spapr.h.
This is ugly because a) not every user who wants to debug guest
problems can or wants to recompile QEMU to be able to see such issues,
and b) since this macro is disabled by default, the code in the
hcall_dprintf() brackets tends to bitrot until somebody temporarily
enables that macro again.
Since the hcall_dprintf statements except one indicate guest
problems, let's always use qemu_log_mask(LOG_GUEST_ERROR, ...) for
this macro instead. One spot indicated an unimplemented host feature,
so this is changed into qemu_log_mask(LOG_UNIMP, ...) instead. Now
it's possible to see all those messages by simply adding the CLI
parameter "-d guest_errors,unimp", without the need to re-compile
the binary.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The DRC_INDEX_ID_MASK macro does a left shift on ~0, which is a signed
quantity, and therefore undefined behaviour according to the C spec. In
particular this causes warnings from the clang sanitizer.
This fixes it by calculating the same mask without using ~0 (I think the
new method is a more common idiom for generating masks anyway). For good
measure I also use 1ULL to force the expression's type to unsigned long
long, which should be good for assigning to anything we're going to want
to.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
dumpdtb (-machine dumpdtb=<file>) allows one to inspect the generated
device tree of machine types that generate device trees. This is
useful for a) seeing what's there b) debugging/testing device tree
generator patches. It can be used as follows
$QEMU_CMDLINE -machine dumpdtb=dtb
dtc -I dtb -O dts dtb
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Improve the SPLPAR Characteristics information:
Add MaxPlatProcs: set to max_cpus, the maximum CPUs that could be
addded to the system.
Add DesMem: set to the initial memory of the system.
Add DesProcs: set to smp_cpus, the inital number of CPUs in the
system.
These tokens and values are specified by PAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, rtas_ibm_change_msi() always returns four values even if
less are specified.
Correct this by only returning the fourth parameter if it was
requested.
This is specified by PAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU is MSI-X capable and makes it available via ibm,change-msi, so
we should indicate this by adding /rtas/ibm,change-msix-capable to the
device tree.
This is specificed by PAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU has a notion of the guest name, so if it's present we might as
well put that into the device tree as /ibm,partition-name.
This is specificed by PAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add pseries-2.5 machine version.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[Altered to merge before memory hotplug -- dwg]
[Altered to work with b9f072d01 -- dwg]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Include an error message when migration fails due to mismatch in
htab_shift values at source and target. This should provide a bit more
verbose message in addition to the current migration failure message
that reads like:
qemu-system-ppc64: error while loading state for instance 0x0 of device 'spapr/htab'
After this patch, the failure message will look like this:
qemu-system-ppc64: htab_shift mismatch: source 29 target 24
qemu-system-ppc64: error while loading state for instance 0x0 of device 'spapr/htab'
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Dropped by commit da76ee76f78b9705e2a91e3c964aef28fecededb's
transition to hmp-commands-info.hx.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1442589509-10806-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently device_del requires that the client provide the
device short ID. device_add allows devices to be created
without giving an ID, at which point there is no way to
delete them with device_del. The QOM object path, however,
provides an alternative way to identify the devices.
Allowing device_del to accept an object path ensures all
devices are deletable regardless of whether they have an
ID.
(qemu) device_add usb-mouse
(qemu) qom-list /machine/peripheral-anon
device[0] (child<usb-mouse>)
type (string)
(qemu) device_del /machine/peripheral-anon/device[0]
Devices are required to be marked as hotpluggable
otherwise an error is raised
(qemu) device_del /machine/unattached/device[4]
Device 'PIIX3' does not support hotplugging
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1441974836-17476-1-git-send-email-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message touched up, accidental white-space change dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ut3L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-09-21' into staging
qapi: QMP introspection
# gpg: Signature made Mon 21 Sep 2015 08:59:17 BST using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-qapi-2015-09-21: (26 commits)
qapi-introspect: Hide type names
qapi: New QMP command query-qmp-schema for QMP introspection
qapi: Pseudo-type '**' is now unused, drop it
qapi-schema: Fix up misleading specification of netdev_add
qom: Don't use 'gen': false for qom-get, qom-set, object-add
qapi: Introduce a first class 'any' type
qapi: Make output visitor return qnull() instead of NULL
qapi: Improve built-in type documentation
qapi-commands: De-duplicate output marshaling functions
qapi: De-duplicate parameter list generation
qapi: Rename qmp_marshal_input_FOO() to qmp_marshal_FOO()
qapi-commands: Rearrange code
qapi-visit: Rearrange code a bit
qapi: Clean up after recent conversions to QAPISchemaVisitor
qapi: Replace dirty is_c_ptr() by method c_null()
qapi-event: Convert to QAPISchemaVisitor, fixing data with base
qapi-event: Eliminate global variable event_enum_value
qapi: De-duplicate enum code generation
qapi-commands: Convert to QAPISchemaVisitor
qapi-visit: Convert to QAPISchemaVisitor, fixing bugs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Highlights this time around:
- e500: Fix u-boot boot with -M virt by updating to new version
- e500: fix ATMU reads
- book3s: Fixes (unaligned exceptions, vector instructions)
- yet another dbdma ide fix
I'm out taking care of my son for the next 2 months. During that time
please consider David Gibson the interim ppc queue maintainer. I'm sure
Aurelien will be more than happy to help him review patches as well ;-).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=a2d3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2015-09-20
Highlights this time around:
- e500: Fix u-boot boot with -M virt by updating to new version
- e500: fix ATMU reads
- book3s: Fixes (unaligned exceptions, vector instructions)
- yet another dbdma ide fix
I'm out taking care of my son for the next 2 months. During that time
please consider David Gibson the interim ppc queue maintainer. I'm sure
Aurelien will be more than happy to help him review patches as well ;-).
# gpg: Signature made Sun 20 Sep 2015 21:51:16 BST using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg: aka "Alexander Graf <alex@csgraf.de>"
* remotes/agraf/tags/signed-ppc-for-upstream:
target-ppc: fix xscmpodp and xscmpudp decoding
target-ppc: fix vcipher, vcipherlast, vncipherlast and vpermxor
PPC: E500: Update u-boot to commit 79c884d7e4
target-ppc: Fix SRR0 when taking unaligned exceptions
PPC: e500 pci host: Fix ATMUs register reads
mac_dbdma: always clear FLUSH bit once DBDMA channel flush is complete
kvm_ppc: remove kvmppc_timer_hack
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To eliminate the temptation for clients to look up types by name
(which are not ABI), replace all type names by meaningless strings.
Reduces output of query-schema by 13 out of 85KiB.
As a debugging aid, provide option -u to suppress the hiding.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1442401589-24189-27-git-send-email-armbru@redhat.com>
qapi/introspect.json defines the introspection schema. It's designed
for QMP introspection, but should do for similar uses, such as QGA.
The introspection schema does not reflect all the rules and
restrictions that apply to QAPI schemata. A valid QAPI schema has an
introspection value conforming to the introspection schema, but the
converse is not true.
Introspection lowers away a number of schema details, and makes
implicit things explicit:
* The built-in types are declared with their JSON type.
All integer types are mapped to 'int', because how many bits we use
internally is an implementation detail. It could be pressed into
external interface service as very approximate range information,
but that's a bad idea. If we need range information, we better do
it properly.
* Implicit type definitions are made explicit, and given
auto-generated names:
- Array types, named by appending "List" to the name of their
element type, like in generated C.
- The enumeration types implicitly defined by simple union types,
named by appending "Kind" to the name of their simple union type,
like in generated C.
- Types that don't occur in generated C. Their names start with ':'
so they don't clash with the user's names.
* All type references are by name.
* The struct and union types are generalized into an object type.
* Base types are flattened.
* Commands take a single argument and return a single result.
Dictionary argument or list result is an implicit type definition.
The empty object type is used when a command takes no arguments or
produces no results.
The argument is always of object type, but the introspection schema
doesn't reflect that.
The 'gen': false directive is omitted as implementation detail.
The 'success-response' directive is omitted as well for now, even
though it's not an implementation detail, because it's not used by
QMP.
* Events carry a single data value.
Implicit type definition and empty object type use, just like for
commands.
The value is of object type, but the introspection schema doesn't
reflect that.
* Types not used by commands or events are omitted.
Indirect use counts as use.
* Optional members have a default, which can only be null right now
Instead of a mandatory "optional" flag, we have an optional default.
No default means mandatory, default null means optional without
default value. Non-null is available for optional with default
(possible future extension).
* Clients should *not* look up types by name, because type names are
not ABI. Look up the command or event you're interested in, then
follow the references.
TODO Should we hide the type names to eliminate the temptation?
New generator scripts/qapi-introspect.py computes an introspection
value for its input, and generates a C variable holding it.
It can generate awfully long lines. Marked TODO.
A new test-qmp-input-visitor test case feeds its result for both
tests/qapi-schema/qapi-schema-test.json and qapi-schema.json to a
QmpInputVisitor to verify it actually conforms to the schema.
New QMP command query-qmp-schema takes its return value from that
variable. Its reply is some 85KiBytes for me right now.
If this turns out to be too much, we have a couple of options:
* We can use shorter names in the JSON. Not the QMP style.
* Optionally return the sub-schema for commands and events given as
arguments.
Right now qmp_query_schema() sends the string literal computed by
qmp-introspect.py. To compute sub-schema at run time, we'd have to
duplicate parts of qapi-introspect.py in C. Unattractive.
* Let clients cache the output of query-qmp-schema.
It changes only on QEMU upgrades, i.e. rarely. Provide a command
query-qmp-schema-hash. Clients can have a cache indexed by hash,
and re-query the schema only when they don't have it cached. Even
simpler: put the hash in the QMP greeting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'gen': false needs to stay for now, because netdev_add is still using
it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-25-git-send-email-armbru@redhat.com>
It doesn't take a 'props' argument, let alone one in the format
"NAME=VALUE,..."
The bogus arguments specification doesn't matter due to 'gen': false.
Clean it up to be incomplete rather than wrong, and document the
incompleteness.
While there, improve netdev_add usage example in the manual: add a
device option to show how it's done.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-24-git-send-email-armbru@redhat.com>
With the previous commit, the generated marshalers just work, and save
us a bit of handwritten code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-23-git-send-email-armbru@redhat.com>
It's first class, because unlike '**', it actually works, i.e. doesn't
require 'gen': false.
'**' will go away next.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Before commit 1d10b44, it crashed. Since then, it returns NULL, with
a FIXME comment. The FIXME is valid: code that assumes QObject *
can't be null exists. I'm not aware of a way to feed this problematic
return value to code that actually chokes on null in the current code,
but the next few commits will create one, failing "make check".
Commit 481b002 solved a very similar problem by introducing a special
null QObject. Using this special null QObject is clearly the right
way to resolve this FIXME, so do that, and update the test
accordingly.
However, the patch isn't quite right: it messes up the reference
counting. After about SIZE_MAX visits, the reference counter
overflows, failing the assertion in qnull_destroy_obj(). Because
that's many orders of magnitude more visits of nulls than we expect,
we take this patch despite its flaws, to get the QMP introspection
stuff in without further delay. We'll want to fix it for real before
the release.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-21-git-send-email-armbru@redhat.com>
Clarify how they map to JSON. Add how they map to C. Fix the
reference to StringInputVisitor.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-20-git-send-email-armbru@redhat.com>
gen_marshal_output() uses its parameter name only for name of the
generated function. Name it after the type being marshaled instead of
its caller, and drop duplicates.
Saves 7 copies of qmp_marshal_output_int() in qemu-ga, and one copy of
qmp_marshal_output_str() in qemu-system-*.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-19-git-send-email-armbru@redhat.com>
Generated qapi-event.[ch] lose line breaks. No change otherwise.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-18-git-send-email-armbru@redhat.com>
These functions marshal both input and output.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-17-git-send-email-armbru@redhat.com>
Rename gen_marshal_input() to gen_marshal(), because the generated
function marshals both arguments and results.
Rename gen_visitor_input_containers_decl() to gen_marshal_vars(), and
move the other variable declarations there, too.
Rename gen_visitor_input_block() to gen_marshal_input_visit(), and
rearrange its code slightly.
Rename gen_marshal_input_decl() to gen_marshal_proto(), because the
result isn't a full declaration, unlike gen_command_decl()'s.
New gen_marshal_decl() actually returns a full declaration.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-16-git-send-email-armbru@redhat.com>
Move gen_visit_decl() to a better place. Inline
generate_visit_struct_body().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-15-git-send-email-armbru@redhat.com>
Generate just 'FOO' instead of 'struct FOO' when possible.
Drop helper functions that are now unused.
Make pep8 and pylint reasonably happy.
Rename generate_FOO() functions to gen_FOO() for consistency.
Use more consistent and sensible variable names.
Consistently use c_ for mapping keys when their value is a C
identifier or type.
Simplify gen_enum() and gen_visit_union()
Consistently use single quotes for C text string literals.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1442401589-24189-14-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
is_c_ptr() looks whether the end of the C text for the type looks like
a pointer. Works, but is fragile.
We now have a better tool: use QAPISchemaType method c_null(). The
initializers for non-pointers become prettier: 0, false or the
enumeration constant with the value 0 instead of {0}.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-13-git-send-email-armbru@redhat.com>
