- do not return extra pages when requesting all pages (PAGE CODE = 0x3f)
- return correct sense code for PC = 3 (saved parameters not supported)
- do not return geometry pages for CD devices
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even though we do not use them, we should include the last three
bytes of sense data in the additional sense length.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to distinguish
from the 12-byte CDB variant, and add a constant for the subcommand.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Writes go through scsi_write_complete at least twice, the first time
to get some data without having actually written anything. Because
of this, the first time scsi_write_complete is called it will call
bdrv_acct_done and account a read incorrectly. Fix this by looking
at the aiocb. I am doing the same in scsi_read_complete for symmetry,
but it is only needed in the (bogus) case of bdrv_aio_readv returning
NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should be able to use it without an unclean include of
block_int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We try the drive defined with -drive if=ide,index=0 (or equivalent
sugar). We use it only if (dinfo && bdrv_is_inserted(dinfo->bdrv) &&
!bdrv_is_removable(dinfo->bdrv)). This is a convoluted way to test
for "drive media can't be removed".
The only way to create such a drive with -drive if=ide is media=cdrom.
And that sets dinfo->media_cd, so just test that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
pci_piix3_xen_ide_unplug() unplugs only disks, not CD-ROMs. It peeks
into the DriveInfo's BlockDriverState to distinguish between the two.
Unclean; use DriveInfo member media_cd, like xen_config_dev_blk().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
fdctrl_change_cb() gets called on a virtual media change via monitor.
It would be nice if host device block drivers called it on physical
media change, but they don't.
bdrv_media_changed() lets you poll for media change, but it returns
"don't know" except with block driver "host_floppy".
FDrive member media_changed gets set on device initialization and by
fdctrl_change_cb(), and cleared by fdctrl_media_changed(). Thus, it's
set on first entry to fdctrl_media_changed() since device
initialization or virtual media change.
fdctrl_media_changed() ignores media_changed unless
bdrv_media_changed() returns "don't know". If we change media via
monitor (setting media_changed), and the new media's block driver
returns 0, we lose. Fortunately, "host_floppy" always returns 1 on
first call. Brittle. Clean it up not to rely on it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop WIN_SRST, it has the same value as WIN_DEVICE_RESET.
Drop unused WIN_RESTORE, it has the same value as WIN_RECAL.
Drop codes that are not implemented and long obsolete: WIN_READ_LONG,
WIN_READ_LONG_ONCE, WIN_WRITE_LONG, WIN_WRITE_LONG_ONCE, WIN_FORMAT
(all obsolete since ATA4), WIN_ACKMEDIACHANGE, WIN_POSTBOOT,
WIN_PREBOOT (obsolete since ATA3), WIN_WRITE_SAME (obsolete since
ATA3, code reused for something else in ACS2), WIN_IDENTIFY_DMA
(obsolete since ATA4).
Drop codes that are not implemented and vendor-specific:
EXABYTE_ENABLE_NEST, DISABLE_SEAGATE.
Drop WIN_INIT, it isn't implemented, its value used to be reserved,
and is used for something else since ATA8.
CFA_IDLEIMMEDIATE isn't specific to CFATA. ACS-2 shows it as a
defined command in ATA-1, -2 and -3. Rename to WIN_IDLEIMMEDIATE2.
Mark vendor specific, retired, and obsolete codes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Multiplexing callbacks complicates matters needlessly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, this just protects against programming errors like having the
same drive back multiple non-qdev devices, or untimely bdrv_delete().
Later commits will add other interesting uses.
While there, rename BlockDriverState member peer to dev, bdrv_attach()
to bdrv_attach_dev(), bdrv_detach() to bdrv_detach_dev(), and
bdrv_get_attached() to bdrv_get_attached_dev().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new memory space for PCI instead of using system memory.
This also fixes a bug where VGA region vga.chain4 is
accidentally mapped to 0xa0000 instead of 0x1ff000a0000.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Enabling the I/O thread by default seems like an important part of declaring
1.0. Besides allowing true SMP support with KVM, the I/O thread means that the
TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which
currently requires a (racey) signal based alarm system.
I know there have been concerns about performance. I think so far the ones that
have come up (virtio-net) are most likely due to secondary reasons like
decreased batching.
I think we ought to force enabling I/O thread early in 1.0 development and
commit to resolving any lingering issues.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Convert the tusb6010 to qdev.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This commit implements the prefetch engine feature of the GPMC
which can be used for NAND devices. This includes both interrupt
driven and DMA-filling modes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor the gpmc state structure so items relating to
the prefetch engine are in their own sub-struct and have
more useful names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OMAP3630 adds an extra bit of address masking, so a mask of
0xb1111 is valid. Unfortunately the GPMC_REVISION is the same as
on the OMAP3430 which only has three bits of address masking, so
we have to derive this feature directly from the OMAP revision
rather than from the GPMC revision.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the OMAP 3630 to the omap_mpu_model enumeration, and add the
corresponding cpu_is_omap3630() function.
(OMAP3 isn't supported yet but this is useful in upgrading common
components to be "OMAP3 ready". We already have this for OMAP3430.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support accesses to NAND devices, both by mapping them into
the GPMC address space, and via the NAND_COMMAND, NAND_ADDRESS
and NAND_DATA GPMC registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Take a pointer to the omap mpu state struct in omap_gpmc_init.
Some details of GPMC behaviour depend on the OMAP version we
are a part of.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The OMAP3 TRM is inconsistent about whether the GPMC FIFOTHRESHOLDSTATUS
bit should be set when FIFOPOINTER > FIFOTHRESHOLD or when it is >=
FIFOTHRESHOLD. Apparently the underlying functional spec from which
the TRM was created states that the behaviour is ">=", and this also
makes more conceptual sense.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The omap_gpmc wasn't actually wiring up its IRQ, so
anything that provoked an interrupt would be using
uninitialised data for its IRQ number.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a bug in the handling of writes to GPMC_IRQSTATUS:
it behaves as "write one to clear, writing zero is ignored".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor the omap_gpmc_cs_map/unmap functions:
* take the omap_gpmc_s* and a chipselect id rather than the
omap_gpmc_cs_file_s*, so they have access to the general gpmc
member fields
* extract the base and mask from the config registers in the functions
rather than at every callsite
* check for CSVALID in the functions rather than at every callsite
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all callers of omap_gpmc_attach pass in a MemoryRegion*,
we can remove the base_update and unmap function pointer arguments,
and the opaque pointer that was passed into these callbacks.
We can also remove the base and size fields from omap_gpmc_cs_file_s
as these are no longer necessary (you don't need the base/size
to unmap a MemoryRegion the way you did to undo a mapping made
with cpu_register_physical_memory()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minor whitespace-only cleanup (separated out from the qdevifying
patch for clarity).
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Qdevify the ONENAND device.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor onenand_command() -- since it is essentially a method of
the device object, it doesn't make sense to pass in something as
an argument which is one of the object's own member fields.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a sysbus_mmio_get_region() which allows users of sysbus
devices to turn a (SysBusDevice*, mmioidx) tuple into a
MemoryRegion*. This enables some useful simplifications of
devices which pass through another device's mmio region
(either directly or by implementing some kind of memory
controller device).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The a7 area was set up as an alias of itself, rather than the p4 area. This
sent the memory core into infinite recursion.
Fix by aliasing the a7 area to the p4 area.
Signed-off-by: Avi Kivity <avi@redhat.com>
clear interrupt request if the interrupt priority < CPU pil
clear hardware interrupt request if interrupts are disabled
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: added a comment about magic 2]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Extract G364 ROM contents from device emulation to machine emulation,
so device emulation can be reused in other machines (Commodore Amiga)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
