On GICv2 and later, level triggered interrupts are pending when either
the interrupt line is asserted or the interrupt was made pending by a
GICD_ISPENDRn write. Making a level triggered interrupt pending by
software persists until either the interrupt is acknowledged or cleared
by writing GICD_ICPENDRn. As long as the interrupt line is asserted,
the interrupt is pending in any case.
This logic is transparently implemented in gic_test_pending() for
GICv1 and GICv2. The function combines the "pending" irq_state flag
(used for edge triggered interrupts and software requests) and the
line status (tracked in the "level" field). However, we also
incorrectly set the pending flag on a guest write to GICD_ISENABLERn
if the line of a level triggered interrupt was asserted. This keeps
the interrupt pending even if the line is de-asserted after some
time.
This incorrect logic is a leftover of the initial 11MPCore GIC
implementation. That handles things slightly differently to the
architected GICv1 and GICv2. The 11MPCore TRM does not give a lot of
detail on the corner cases of its GIC's behaviour, and historically
we have not wanted to investigate exactly what it does in reality, so
QEMU's GIC model takes the approach of "retain our existing behaviour
for 11MPCore, and implement the architectural standard for later GIC
revisions".
On that basis, commit 8d999995e4 in 2013 is where we added the
"level-triggered interrupt with the line asserted" handling to
gic_test_pending(), and we deliberately kept the old behaviour of
gic_test_pending() for REV_11MPCORE. That commit should have added
the "only if 11MPCore" condition to the setting of the pending bit on
writes to GICD_ISENABLERn, but forgot it.
Add the missing "if REV_11MPCORE" condition, so that our behaviour
on GICv1 and GICv2 matches the GIC architecture requirements.
Cc: qemu-stable@nongnu.org
Fixes: 8d999995e4 ("arm_gic: Fix GIC pending behavior")
Signed-off-by: Jan Klötzke <jan.kloetzke@kernkonzept.com>
Message-id: 20240911114826.3558302-1-jan.kloetzke@kernkonzept.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expanded comment a little and converted to coding-style form;
expanded commit message with the historical backstory]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 110684c9a6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The real period is zero when both period and period_frac are zero.
Check the method ptimer_set_freq, if freq is larger than 1000 MHz,
the period is zero, but the period_frac is not, in this case, the
ptimer will work but the current code incorrectly recognizes that
the ptimer is disabled.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2306
Signed-off-by: JianZhou Yue <JianZhou.Yue@verisilicon.com>
Message-id: 3DA024AEA8B57545AF1B3CAA37077D0FB75E82C8@SHASXM03.verisilicon.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 446e5e8b45)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We neglected to clear the @data_count index on ADMA error,
allowing to trigger assertion in sdhci_read_dataport() or
sdhci_write_dataport().
Cc: qemu-stable@nongnu.org
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2455
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240730092138.32443-4-philmd@linaro.org>
(cherry picked from commit ed5a159c3d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Patch 06b1297017 ("virtio-net: fix network stall under load")
added double-check to test whether the available buffer size
can satisfy the request or not, in case the guest has added
some buffers to the avail ring simultaneously after the first
check. It will be lucky if the available buffer size becomes
okay after the double-check, then the host can send the packet
to the guest. If the buffer size still can't satisfy the request,
even if the guest has added some buffers, viritio-net would
stall at the host side forever.
The patch enables notification and checks whether the guest has
added some buffers since last check of available buffers when
the available buffers are insufficient. If no buffer is added,
return false, else recheck the available buffers in the loop.
If the available buffers are sufficient, disable notification
and return true.
Changes:
1. Change the return type of virtqueue_get_avail_bytes() from void
to int, it returns an opaque that represents the shadow_avail_idx
of the virtqueue on success, else -1 on error.
2. Add a new API: virtio_queue_enable_notification_and_check(),
it takes an opaque as input arg which is returned from
virtqueue_get_avail_bytes(). It enables notification firstly,
then checks whether the guest has added some buffers since
last check of available buffers or not by virtio_queue_poll(),
return ture if yes.
The patch also reverts patch "06b12970174".
The case below can reproduce the stall.
Guest 0
+--------+
| iperf |
---------------> | server |
Host | +--------+
+--------+ | ...
| iperf |----
| client |---- Guest n
+--------+ | +--------+
| | iperf |
---------------> | server |
+--------+
Boot many guests from qemu with virtio network:
qemu ... -netdev tap,id=net_x \
-device virtio-net-pci-non-transitional,\
iommu_platform=on,mac=xx:xx:xx:xx:xx:xx,netdev=net_x
Each guest acts as iperf server with commands below:
iperf3 -s -D -i 10 -p 8001
iperf3 -s -D -i 10 -p 8002
The host as iperf client:
iperf3 -c guest_IP -p 8001 -i 30 -w 256k -P 20 -t 40000
iperf3 -c guest_IP -p 8002 -i 30 -w 256k -P 20 -t 40000
After some time, the host loses connection to the guest,
the guest can send packet to the host, but can't receive
packet from the host.
It's more likely to happen if SWIOTLB is enabled in the guest,
allocating and freeing bounce buffer takes some CPU ticks,
copying from/to bounce buffer takes more CPU ticks, compared
with that there is no bounce buffer in the guest.
Once the rate of producing packets from the host approximates
the rate of receiveing packets in the guest, the guest would
loop in NAPI.
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
| need kick the host?
| NAPI continues
v
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
v
... ...
On the other hand, the host fetches free buf from avail
ring, if the buf in the avail ring is not enough, the
host notifies the guest the event by writing the avail
idx read from avail ring to the event idx of used ring,
then the host goes to sleep, waiting for the kick signal
from the guest.
Once the guest finds the host is waiting for kick singal
(in virtqueue_kick_prepare_split()), it kicks the host.
The host may stall forever at the sequences below:
Host Guest
------------ -----------
fetch buf, send packet receive packet ---
... ... |
fetch buf, send packet add buf |
... add buf virtnet_poll
buf not enough avail idx-> add buf |
read avail idx add buf |
add buf ---
receive packet ---
write event idx ... |
wait for kick add buf virtnet_poll
... |
---
no more packet, exit NAPI
In the first loop of NAPI above, indicated in the range of
virtnet_poll above, the host is sending packets while the
guest is receiving packets and adding buffers.
step 1: The buf is not enough, for example, a big packet
needs 5 buf, but the available buf count is 3.
The host read current avail idx.
step 2: The guest adds some buf, then checks whether the
host is waiting for kick signal, not at this time.
The used ring is not empty, the guest continues
the second loop of NAPI.
step 3: The host writes the avail idx read from avail
ring to used ring as event idx via
virtio_queue_set_notification(q->rx_vq, 1).
step 4: At the end of the second loop of NAPI, recheck
whether kick is needed, as the event idx in the
used ring written by the host is beyound the
range of kick condition, the guest will not
send kick signal to the host.
Fixes: 06b1297017 ("virtio-net: fix network stall under load")
Cc: qemu-stable@nongnu.org
Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit f937309fbd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in include/hw/virtio/virtio.h)
Ensure the queue index points to a valid queue when software RSS
enabled. The new calculation matches with the behavior of Linux's TAP
device with the RSS eBPF program.
Fixes: 4474e37a5b ("virtio-net: implement RX RSS processing")
Reported-by: Zhibin Hu <huzhibin5@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit f1595ceb9a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: CVE-2024-6505
In amdvi_update_iotlb() we will only put a new entry in the hash
table if to_cache.perm is not IOMMU_NONE. However we allocate the
memory for the new AMDVIIOTLBEntry and for the hash table key
regardless. This means that in the IOMMU_NONE case we will leak the
memory we alloacted.
Move the allocations into the if() to the point where we know we're
going to add the item to the hash table.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2452
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240731170019.3590563-1-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9a45b07616)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The documentation of the "Set palette" mailbox property at
https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface#set-palette
says it has the form:
Length: 24..1032
Value:
u32: offset: first palette index to set (0-255)
u32: length: number of palette entries to set (1-256)
u32...: RGBA palette values (offset to offset+length-1)
We get this wrong in a couple of ways:
* we aren't checking the offset and length are in range, so the guest
can make us spin for a long time by providing a large length
* the bounds check on our loop is wrong: we should iterate through
'length' palette entries, not 'length - offset' entries
Fix the loop to implement the bounds checks and get the loop
condition right. In the process, make the variables local to
this switch case, rather than function-global, so it's clearer
what type they are when reading the code.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-2-peter.maydell@linaro.org
(cherry picked from commit 0892fffc2a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix due to lack of
v9.0.0-1812-g5d5f1b60916a "hw/misc: Implement mailbox properties for customer OTP and device specific private keys"
v8.0.0-1924-g251918266666 "hw/misc/bcm2835_property: Use 'raspberrypi-fw-defs.h' definitions"
also remove now-unused local `n' variable which gets removed in the next change in this file,
v9.0.0-2720-g32f1c201eedf "hw/misc/bcm2835_property: Avoid overflow in OTP access properties")
When a bare-metal application on the raspi3 board reads the
AUX_MU_STAT_REG MMIO register while the device's buffer is
at full receive FIFO capacity
(i.e. `s->read_count == BCM2835_AUX_RX_FIFO_LEN`) the
assertion `assert(s->read_count < BCM2835_AUX_RX_FIFO_LEN)`
fails.
Reported-by: Cryptjar <cryptjar@junk.studio>
Suggested-by: Cryptjar <cryptjar@junk.studio>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/459
Signed-off-by: Frederik van Hövell <frederik@fvhovell.nl>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 546d574b11)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Loongson IPI is only available in little-endian,
so use that to access the guest memory (in case
we run on a big-endian host).
Cc: qemu-stable@nongnu.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Fixes: f6783e3438 ("hw/loongarch: Add LoongArch ipi interrupt support")
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240718133312.10324-3-philmd@linaro.org>
(cherry picked from commit 2465c89fb9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixups for 7.2, for lack of:
v9.0.0-583-g91d0b151de4c "hw/intc/loongson_ipi: Implement IOCSR address space for MIPS"
v9.0.0-582-gb4a12dfc2132 "hw/intc/loongarch_ipi: Rename as loongson_ipi"
v8.2.0-545-gfdd6ee0b7653 "hw/intc/loongarch_ipi: Use MemTxAttrs interface for ipi ops")
sgx_epc_get_section assumes a PC platform is in use:
bool sgx_epc_get_section(int section_nr, uint64_t *addr, uint64_t *size)
{
PCMachineState *pcms = PC_MACHINE(qdev_get_machine());
However, sgx_epc_get_section is called by CPUID regardless of whether
SGX state has been initialized or which platform is in use. Check
whether the machine has the right QOM class and if not behave as if
there are no EPC sections.
Fixes: 1dec2e1f19 ("i386: Update SGX CPUID info according to hardware/KVM/user input", 2021-09-30)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2142
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 13be929aff)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The constant must be unsigned, otherwise the two's complement
overrides the other fields when a PASID is present.
Fixes: 1b2b12376c ("intel-iommu: PASID support")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-Id: <20240709142557.317271-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a3c8d7e385)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix)
QEMU crashes (Segmentation fault) when getting cxl-fmw property via
qmp:
(QEMU) qom-get path=machine property=cxl-fmw
This issue is caused by accessing wrong callback (opaque) type in
machine_get_cfmw().
cxl_machine_init() sets the callback as `CXLState *` type but
machine_get_cfmw() treats the callback as
`CXLFixedMemoryWindowOptionsList **`.
Fix this error by casting opaque to `CXLState *` type in
machine_get_cfmw().
Fixes: 03b39fcf64 ("hw/cxl: Make the CXL fixed memory window setup a machine parameter.")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Link: https://lore.kernel.org/r/20240704093404.1848132-1-zhao1.liu@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a207d5f87d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The allocated memory to hold LBA ranges leaks in the nvme_dsm function. This
happens because the allocated memory for iocb->range is not freed in all
error handling paths.
Fix this by adding a free to ensure that the allocated memory is properly freed.
ASAN log:
==3075137==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 480 byte(s) in 6 object(s) allocated from:
#0 0x55f1f8a0eddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7f531e0f6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x55f1faf1f091 in blk_aio_get block/block-backend.c:2583:12
#3 0x55f1f945c74b in nvme_dsm hw/nvme/ctrl.c:2609:30
#4 0x55f1f945831b in nvme_io_cmd hw/nvme/ctrl.c:4470:16
#5 0x55f1f94561b7 in nvme_process_sq hw/nvme/ctrl.c:7039:29
Cc: qemu-stable@nongnu.org
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit c510fe78f1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit d152cdd6f6 ("virtio: use virtio accessor to access packed event")
switched using of address_space_read_cached() to virito_lduw_phys_cached()
to access packed descriptor event.
When we used address_space_read_cached(), we needed to call
virtio_tswap16s() to handle the endianess of the field, but
virito_lduw_phys_cached() already handles it internally, so we no longer
need to call virtio_tswap16s() (as the commit had done for `off_wrap`,
but forgot for `flags`).
Fixes: d152cdd6f6 ("virtio: use virtio accessor to access packed event")
Cc: jasowang@redhat.com
Cc: qemu-stable@nongnu.org
Reported-by: Xoykie <xoykie@gmail.com>
Link: https://lore.kernel.org/qemu-devel/CAFU8RB_pjr77zMLsM0Unf9xPNxfr_--Tjr49F_eX32ZBc5o2zQ@mail.gmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240701075208.19634-1-sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 7aa6492401)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In case the display surface uses a shared buffer (i.e. uses vga vram
directly instead of a shadow) go unshare the buffer before clearing it.
This avoids vga memory corruption, which in turn fixes unblanking not
working properly with X11.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2067
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240605131444.797896-2-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit b1cf266c82)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reproducer from https://gitlab.com/qemu-project/qemu/-/issues/1451
creates small packet (1 segment, len = 10 == n->guest_hdr_len),
then destroys queue.
"if (n->host_hdr_len != n->guest_hdr_len)" is triggered, if body creates
zero length/zero segment packet as there is nothing after guest header.
qemu_sendv_packet_async() tries to send it.
slirp discards it because it is smaller than Ethernet header,
but returns 0 because tx hooks are supposed to return total length of data.
0 is propagated upwards and is interpreted as "packet has been sent"
which is terrible because queue is being destroyed, nobody is waiting for TX
to complete and assert it triggered.
Fix is discard such empty packets instead of sending them.
Length 1 packets will go via different codepath:
virtqueue_push(q->tx_vq, elem, 0);
virtio_notify(vdev, q->tx_vq);
g_free(elem);
and aren't problematic.
Signed-off-by: Alexey Dobriyan <adobriyan@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 2c3e4e2de6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since only root APLICs can have hw IRQ lines, aplic->parent should
be initialized first.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240409014445.278-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit c76b121840)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In gic_cpu_read() and gic_cpu_write(), we delegate the handling of
reading and writing the Non-Secure view of the GICC_APR<n> registers
to functions gic_apr_ns_view() and gic_apr_write_ns_view().
Unfortunately we got the order of the arguments wrong, swapping the
CPU number and the register number (which the compiler doesn't catch
because they're both integers).
Most guests probably didn't notice this bug because directly
accessing the APR registers is typically something only done by
firmware when it is doing state save for going into a sleep mode.
Correct the mismatched call arguments.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: 51fd06e0ee ("hw/intc/arm_gic: Fix handling of GICC_APR<n>, GICC_NSAPR<n> registers")
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
[PMM: Rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée<alex.bennee@linaro.org>
(cherry picked from commit daafa78b29)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
PCI config space is little-endian, so on a big-endian host we need to
perform byte swaps for values as they are passed to and received from
the generic PCI config space access machinery.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Message-ID: <20240507094210.300566-6-mnissler@rivosinc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit e6578f1f68)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use little endian for derivative OTP fuse key.
Cc: qemu-stable@nongnu.org
Fixes: c752bb079b ("hw/nvram: NPCM7xx OTP device model")
Suggested-by: Avi Fishman <Avi.Fishman@nuvoton.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240422125813.1403-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit eb656a60fd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The DMA descriptor structures for this device have
a set of "address extension" fields which extend the 32
bit source addresses with an extra 16 bits to give a
48 bit address:
https://docs.amd.com/r/en-US/ug1085-zynq-ultrascale-trm/ADDR_EXT-Field
However, we misimplemented this address extension in several ways:
* we only extracted 12 bits of the extension fields, not 16
* we didn't shift the extension field up far enough
* we accidentally did the shift as 32-bit arithmetic, which
meant that we would have an overflow instead of setting
bits [47:32] of the resulting 64-bit address
Add a type cast and use extract64() instead of extract32()
to avoid integer overflow on addition. Fix bit fields
extraction according to documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: d3c6369a96 ("introduce xlnx-dpdma")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Message-id: 20240428181131.23801-1-adiupina@astralinux.ru
[PMM: adjusted commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 4b00855f0e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Initialize the machine specific max_cpus limit as per the maximum range
of CPU IPIs available. Keeping between 4096 to 8192 will throw IRQ not
free error due to XIVE/XICS limitation and keeping beyond 8192 will hit
assert in tcg_region_init or spapr_xive_claim_irq.
Logs:
Without patch fix:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097
qemu-system-ppc64: IRQ 4096 is not free
[root@host build]#
On LPAR:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193
**
ERROR:../tcg/region.c:774:tcg_region_init: assertion failed:
(region_size >= 2 * page_size)
Bail out! ERROR:../tcg/region.c:774:tcg_region_init: assertion failed:
(region_size >= 2 * page_size)
Aborted (core dumped)
[root@host build]#
On x86:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193
qemu-system-ppc64: ../hw/intc/spapr_xive.c:596: spapr_xive_claim_irq:
Assertion `lisn < xive->nr_irqs' failed.
Aborted (core dumped)
[root@host build]#
With patch fix:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097
qemu-system-ppc64: Invalid SMP CPUs 4097. The max CPUs supported by
machine 'pseries-8.2' is 4096
[root@host build]#
Reported-by: Kowshik Jois <kowsjois@linux.ibm.com>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit c4f91d7b7b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
spapr_irq_init currently uses existing macro SPAPR_XIRQ_BASE to refer to
the range of CPU IPIs during initialization of nr-irqs property.
It is more appropriate to have its own define which can be further
reused as appropriate for correct interpretation.
Suggested-by: Cedric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit 2df5c1f5b0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Per "SD Host Controller Standard Specification Version 3.00":
* 2.2.5 Transfer Mode Register (Offset 00Ch)
Writes to this register shall be ignored when the Command
Inhibit (DAT) in the Present State register is 1.
Do not update the TRNMOD register when Command Inhibit (DAT)
bit is set to avoid the present-status register going out of
sync, leading to malicious guest using DMA mode and overflowing
the FIFO buffer:
$ cat << EOF | qemu-system-i386 \
-display none -nographic -nodefaults \
-machine accel=qtest -m 512M \
-device sdhci-pci,sd-spec-version=3 \
-device sd-card,drive=mydrive \
-drive if=none,index=0,file=null-co://,format=raw,id=mydrive \
-qtest stdio
outl 0xcf8 0x80001013
outl 0xcfc 0x91
outl 0xcf8 0x80001001
outl 0xcfc 0x06000000
write 0x9100002c 0x1 0x05
write 0x91000058 0x1 0x16
write 0x91000005 0x1 0x04
write 0x91000028 0x1 0x08
write 0x16 0x1 0x21
write 0x19 0x1 0x20
write 0x9100000c 0x1 0x01
write 0x9100000e 0x1 0x20
write 0x9100000f 0x1 0x00
write 0x9100000c 0x1 0x00
write 0x91000020 0x1 0x00
EOF
Stack trace (part):
=================================================================
==89993==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x615000029900 at pc 0x55d5f885700d bp 0x7ffc1e1e9470 sp 0x7ffc1e1e9468
WRITE of size 1 at 0x615000029900 thread T0
#0 0x55d5f885700c in sdhci_write_dataport hw/sd/sdhci.c:564:39
#1 0x55d5f8849150 in sdhci_write hw/sd/sdhci.c:1223:13
#2 0x55d5fa01db63 in memory_region_write_accessor system/memory.c:497:5
#3 0x55d5fa01d245 in access_with_adjusted_size system/memory.c:573:18
#4 0x55d5fa01b1a9 in memory_region_dispatch_write system/memory.c:1521:16
#5 0x55d5fa09f5c9 in flatview_write_continue system/physmem.c:2711:23
#6 0x55d5fa08f78b in flatview_write system/physmem.c:2753:12
#7 0x55d5fa08f258 in address_space_write system/physmem.c:2860:18
...
0x615000029900 is located 0 bytes to the right of 512-byte region
[0x615000029700,0x615000029900) allocated by thread T0 here:
#0 0x55d5f7237b27 in __interceptor_calloc
#1 0x7f9e36dd4c50 in g_malloc0
#2 0x55d5f88672f7 in sdhci_pci_realize hw/sd/sdhci-pci.c:36:5
#3 0x55d5f844b582 in pci_qdev_realize hw/pci/pci.c:2092:9
#4 0x55d5fa2ee74b in device_set_realized hw/core/qdev.c:510:13
#5 0x55d5fa325bfb in property_set_bool qom/object.c:2358:5
#6 0x55d5fa31ea45 in object_property_set qom/object.c:1472:5
#7 0x55d5fa332509 in object_property_set_qobject om/qom-qobject.c:28:10
#8 0x55d5fa31f6ed in object_property_set_bool qom/object.c:1541:15
#9 0x55d5fa2e2948 in qdev_realize hw/core/qdev.c:292:12
#10 0x55d5f8eed3f1 in qdev_device_add_from_qdict system/qdev-monitor.c:719:10
#11 0x55d5f8eef7ff in qdev_device_add system/qdev-monitor.c:738:11
#12 0x55d5f8f211f0 in device_init_func system/vl.c:1200:11
#13 0x55d5fad0877d in qemu_opts_foreach util/qemu-option.c:1135:14
#14 0x55d5f8f0df9c in qemu_create_cli_devices system/vl.c:2638:5
#15 0x55d5f8f0db24 in qmp_x_exit_preconfig system/vl.c:2706:5
#16 0x55d5f8f14dc0 in qemu_init system/vl.c:3737:9
...
SUMMARY: AddressSanitizer: heap-buffer-overflow hw/sd/sdhci.c:564:39
in sdhci_write_dataport
Add assertions to ensure the fifo_buffer[] is not overflowed by
malicious accesses to the Buffer Data Port register.
Fixes: CVE-2024-3447
Cc: qemu-stable@nongnu.org
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Buglink: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=58813
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <CAFEAcA9iLiv1XGTGKeopgMa8Y9+8kvptvsb8z2OBeuy+5=NUfg@mail.gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240409145524.27913-1-philmd@linaro.org>
(cherry picked from commit 9e4b27ca6b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The magic 2048 is explained in the LAN9211 datasheet (DS00002414A)
in chapter 1.4, "10/100 Ethernet MAC":
The MAC Interface Layer (MIL), within the MAC, contains a
2K Byte transmit and a 128 Byte receive FIFO which is separate
from the TX and RX FIFOs. [...]
Note, the use of the constant in lan9118_receive() reveals that
our implementation is using the same buffer for both tx and rx.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240409133801.23503-2-philmd@linaro.org>
(cherry picked from commit a45223467e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When the MAC Interface Layer (MIL) transmit FIFO is full,
truncate the packet, and raise the Transmitter Error (TXE)
flag.
Broken since model introduction in commit 2a42499017
("LAN9118 emulation").
When using the reproducer from
https://gitlab.com/qemu-project/qemu/-/issues/2267 we get:
hw/net/lan9118.c:798:17: runtime error:
index 2048 out of bounds for type 'uint8_t[2048]' (aka 'unsigned char[2048]')
#0 0x563ec9a057b1 in tx_fifo_push hw/net/lan9118.c:798:43
#1 0x563ec99fbb28 in lan9118_writel hw/net/lan9118.c:1042:9
#2 0x563ec99f2de2 in lan9118_16bit_mode_write hw/net/lan9118.c:1205:9
#3 0x563ecbf78013 in memory_region_write_accessor system/memory.c:497:5
#4 0x563ecbf776f5 in access_with_adjusted_size system/memory.c:573:18
#5 0x563ecbf75643 in memory_region_dispatch_write system/memory.c:1521:16
#6 0x563ecc01bade in flatview_write_continue_step system/physmem.c:2713:18
#7 0x563ecc01b374 in flatview_write_continue system/physmem.c:2743:19
#8 0x563ecbff1c9b in flatview_write system/physmem.c:2774:12
#9 0x563ecbff1768 in address_space_write system/physmem.c:2894:18
...
[*] LAN9118 DS00002266B.pdf, Table 5.3.3 "INTERRUPT STATUS REGISTER"
Cc: qemu-stable@nongnu.org
Reported-by: Will Lester
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2267
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240409133801.23503-3-philmd@linaro.org>
(cherry picked from commit ad766d603f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
AppleSMCData is allocated with g_new0() in applesmc_add_key():
release it with g_free().
Leaked since commit 1ddda5cd36 ("AppleSMC device emulation").
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2272
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240408095217.57239-3-philmd@linaro.org>
(cherry picked from commit fc09ff2979)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
nand_command() and nand_getio() don't check @offset points
into the block, nor the available data length (s->iolen) is
not negative.
In order to fix:
- check the offset is in range in nand_blk_load_NAND_PAGE_SIZE(),
- do not set @iolen if blk_load() failed.
Reproducer:
$ cat << EOF | qemu-system-arm -machine tosa \
-monitor none -serial none \
-display none -qtest stdio
write 0x10000111 0x1 0xca
write 0x10000104 0x1 0x47
write 0x1000ca04 0x1 0xd7
write 0x1000ca01 0x1 0xe0
write 0x1000ca04 0x1 0x71
write 0x1000ca00 0x1 0x50
write 0x1000ca04 0x1 0xd7
read 0x1000ca02 0x1
write 0x1000ca01 0x1 0x10
EOF
=================================================================
==15750==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61f000000de0
at pc 0x560e61557210 bp 0x7ffcfc4a59f0 sp 0x7ffcfc4a59e8
READ of size 1 at 0x61f000000de0 thread T0
#0 0x560e6155720f in mem_and hw/block/nand.c:101:20
#1 0x560e6155ac9c in nand_blk_write_512 hw/block/nand.c:663:9
#2 0x560e61544200 in nand_command hw/block/nand.c:293:13
#3 0x560e6153cc83 in nand_setio hw/block/nand.c:520:13
#4 0x560e61a0a69e in tc6393xb_nand_writeb hw/display/tc6393xb.c:380:13
#5 0x560e619f9bf7 in tc6393xb_writeb hw/display/tc6393xb.c:524:9
#6 0x560e647c7d03 in memory_region_write_accessor softmmu/memory.c:492:5
#7 0x560e647c7641 in access_with_adjusted_size softmmu/memory.c:554:18
#8 0x560e647c5f66 in memory_region_dispatch_write softmmu/memory.c:1514:16
#9 0x560e6485409e in flatview_write_continue softmmu/physmem.c:2825:23
#10 0x560e648421eb in flatview_write softmmu/physmem.c:2867:12
#11 0x560e64841ca8 in address_space_write softmmu/physmem.c:2963:18
#12 0x560e61170162 in qemu_writeb tests/qtest/videzzo/videzzo_qemu.c:1080:5
#13 0x560e6116eef7 in dispatch_mmio_write tests/qtest/videzzo/videzzo_qemu.c:1227:28
0x61f000000de0 is located 0 bytes to the right of 3424-byte region [0x61f000000080,0x61f000000de0)
allocated by thread T0 here:
#0 0x560e611276cf in malloc /root/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x7f7959a87e98 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57e98)
#2 0x560e64b98871 in object_new qom/object.c:749:12
#3 0x560e64b5d1a1 in qdev_new hw/core/qdev.c:153:19
#4 0x560e61547ea5 in nand_init hw/block/nand.c:639:11
#5 0x560e619f8772 in tc6393xb_init hw/display/tc6393xb.c:558:16
#6 0x560e6390bad2 in tosa_init hw/arm/tosa.c:250:12
SUMMARY: AddressSanitizer: heap-buffer-overflow hw/block/nand.c:101:20 in mem_and
==15750==ABORTING
Broken since introduction in commit 3e3d5815cb ("NAND Flash memory
emulation and ECC calculation helpers for use by NAND controllers").
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1445
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1446
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240409135944.24997-4-philmd@linaro.org>
(cherry picked from commit d39fdfff34)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Negative offset is meaningless, use unsigned type.
Return a boolean value indicating success.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240409135944.24997-3-philmd@linaro.org>
(cherry picked from commit 2e3e09b368)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240409135944.24997-2-philmd@linaro.org>
(cherry picked from commit 7a86544f28)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace qemu_bh_new_guarded() by virtio_bh_new_guarded()
so the bus and device use the same guard. Otherwise the
DMA-reentrancy protection can be bypassed.
Fixes: CVE-2024-3446
Cc: qemu-stable@nongnu.org
Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240409105537.18308-5-philmd@linaro.org>
(cherry picked from commit f4729ec39a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace qemu_bh_new_guarded() by virtio_bh_new_guarded()
so the bus and device use the same guard. Otherwise the
DMA-reentrancy protection can be bypassed.
Fixes: CVE-2024-3446
Cc: qemu-stable@nongnu.org
Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240409105537.18308-4-philmd@linaro.org>
(cherry picked from commit b4295bff25)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Introduce virtio_bh_new_guarded(), similar to qemu_bh_new_guarded()
but using the transport memory guard, instead of the device one
(there can only be one virtio device per virtio bus).
Inspired-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240409105537.18308-2-philmd@linaro.org>
(cherry picked from commit ec0504b989)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: trivial #include context fixup in include/hw/virtio/virtio.h)
In the event of writing many chains of descriptors, the device must
write just the id of the last buffer in the descriptor chain, skip
forward the number of descriptors in the chain, and then repeat the
operations for the rest of chains.
Current QEMU code writes all the buffer ids consecutively, and then
skips all the buffers altogether. This is a bug, and can be reproduced
with a VirtIONet device with _F_MRG_RXBUB and without
_F_INDIRECT_DESC:
If a virtio-net device has the VIRTIO_NET_F_MRG_RXBUF feature
but not the VIRTIO_RING_F_INDIRECT_DESC feature,
'VirtIONetQueue->rx_vq' will use the merge feature
to store data in multiple 'elems'.
The 'num_buffers' in the virtio header indicates how many elements are merged.
If the value of 'num_buffers' is greater than 1,
all the merged elements will be filled into the descriptor ring.
The 'idx' of the elements should be the value of 'vq->used_idx' plus 'ndescs'.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Wafer <wafer@jaguarmicro.com>
Message-Id: <20240407015451.5228-2-wafer@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2d9a31b3c2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When vhost-user or vhost-kernel is handling virtio net datapath,
QEMU should not touch used ring.
But with vhost-user socket reconnect scenario, in a very rare case
(has pending kick event). VRING_USED_F_NO_NOTIFY is set by QEMU in
following code path:
#0 virtio_queue_split_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:511
#1 0x0000559d6dbf033b in virtio_queue_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:576
#2 0x0000559d6dbbbdbc in virtio_net_handle_tx_bh (vdev=0x559d703a6aa0, vq=0x7ff5f4c920a8) at ../hw/net/virtio-net.c:2801
#3 0x0000559d6dbf4791 in virtio_queue_notify_vq (vq=0x7ff5f4c920a8) at ../hw/virtio/virtio.c:2248
#4 0x0000559d6dbf79da in virtio_queue_host_notifier_read (n=0x7ff5f4c9211c) at ../hw/virtio/virtio.c:3525
#5 0x0000559d6d9a5814 in virtio_bus_cleanup_host_notifier (bus=0x559d703a6a20, n=1) at ../hw/virtio/virtio-bus.c:321
#6 0x0000559d6dbf83c9 in virtio_device_stop_ioeventfd_impl (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3774
#7 0x0000559d6d9a55c8 in virtio_bus_stop_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:259
#8 0x0000559d6d9a53e8 in virtio_bus_grab_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:199
#9 0x0000559d6dbf841c in virtio_device_grab_ioeventfd (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3783
#10 0x0000559d6d9bde18 in vhost_dev_enable_notifiers (hdev=0x559d707edd70, vdev=0x559d703a6aa0) at ../hw/virtio/vhost.c:1592
#11 0x0000559d6d89a0b8 in vhost_net_start_one (net=0x559d707edd70, dev=0x559d703a6aa0) at ../hw/net/vhost_net.c:266
#12 0x0000559d6d89a6df in vhost_net_start (dev=0x559d703a6aa0, ncs=0x559d7048d890, data_queue_pairs=31, cvq=0) at ../hw/net/vhost_net.c:412
#13 0x0000559d6dbb5b89 in virtio_net_vhost_status (n=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:311
#14 0x0000559d6dbb5e34 in virtio_net_set_status (vdev=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:392
#15 0x0000559d6dbb60d8 in virtio_net_set_link_status (nc=0x559d7048d890) at ../hw/net/virtio-net.c:455
#16 0x0000559d6da64863 in qmp_set_link (name=0x559d6f0b83d0 "hostnet1", up=true, errp=0x7ffdd76569f0) at ../net/net.c:1459
#17 0x0000559d6da7226e in net_vhost_user_event (opaque=0x559d6f0b83d0, event=CHR_EVENT_OPENED) at ../net/vhost-user.c:301
#18 0x0000559d6ddc7f63 in chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:62
#19 0x0000559d6ddc7fdc in qemu_chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:82
This issue causes guest kernel stop kicking device and traffic stop.
Add vhost_started check in virtio_net_handle_tx_bh to fix this wrong
VRING_USED_F_NO_NOTIFY set.
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240402045109.97729-1-yajunw@nvidia.com>
[PMD: Use unlikely()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 4c54f5bc8e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the group of the highest priority pending interrupt is disabled
via ICC_IGRPEN*, the ICC_HPPIR* registers should return
INTID_SPURIOUS, not the interrupt ID. (See the GIC architecture
specification pseudocode functions ICC_HPPIR1_EL1[] and
HighestPriorityPendingInterrupt().)
Make HPPIR reads honour the group disable, the way we already do
when determining whether to preempt in icc_hppi_can_preempt().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240328153333.2522667-1-peter.maydell@linaro.org
(cherry picked from commit 44e25fbc19)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
virtio_net_guest_notifier_pending() and virtio_net_guest_notifier_mask()
checked VIRTIO_NET_F_MQ to know there are multiple queues, but
VIRTIO_NET_F_RSS also enables multiple queues. Refer to n->multiqueue,
which is set to true either of VIRTIO_NET_F_MQ or VIRTIO_NET_F_RSS is
enabled.
Fixes: 68b0a6395f ("virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 1c188fc8cb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The io_timeout property, introduced in c9b6609 (part of 6.0) is
silently overwritten by the hardcoded default value of 30 seconds
(DEFAULT_IO_TIMEOUT) in scsi_generic_realize because that function is
being called after the properties have already been applied.
The property definition already has a default value which is applied
correctly when no value is explicitly set, so we can just remove the
code which overrides the io_timeout completely.
This has been tested by stracing SG_IO operations with the io_timeout
property set and unset and now sets the timeout field in the ioctl
request to the proper value.
Fixes: c9b6609b69 ("scsi: make io_timeout configurable")
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Message-ID: <20240315145831.2531695-1-lorenz@brun.one>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 7c7a9f578e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With a numa set up such as
-numa nodeid=0,cpus=0 \
-numa nodeid=1,memdev=mem \
-numa nodeid=2,cpus=1
and appropriate hmat_lb entries the initiator list is correctly
computed and writen to HMAT as 0,2 but then the LB data is accessed
using the node id (here 2), landing outside the entry_list array.
Stash the reverse lookup when writing the initiator list and use
it to get the correct array index index.
Fixes: 4586a2cb83 ("hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240307160326.31570-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 74e2845c5f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The guest may write NumVFs greater than TotalVFs and that can lead
to buffer overflow in VF implementations.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2024-26327
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-2-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
(cherry picked from commit 6081b4243c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
nvme_sriov_pre_write_ctrl() used to directly inspect SR-IOV
configurations to know the number of VFs being disabled due to SR-IOV
configuration writes, but the logic was flawed and resulted in
out-of-bound memory access.
It assumed PCI_SRIOV_NUM_VF always has the number of currently enabled
VFs, but it actually doesn't in the following cases:
- PCI_SRIOV_NUM_VF has been set but PCI_SRIOV_CTRL_VFE has never been.
- PCI_SRIOV_NUM_VF was written after PCI_SRIOV_CTRL_VFE was set.
- VFs were only partially enabled because of realization failure.
It is a responsibility of pcie_sriov to interpret SR-IOV configurations
and pcie_sriov does it correctly, so use pcie_sriov_num_vfs(), which it
provides, to get the number of enabled VFs before and after SR-IOV
configuration writes.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2024-26328
Fixes: 11871f53ef ("hw/nvme: Add support for the Virtualization Management command")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-1-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 91bb64a8d2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
igb can use this function to change its behavior depending on the
number of virtual functions currently enabled.
Signed-off-by: Gal Hammer <gal.hammer@sap.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 31180dbdca)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: needed for v8.2.0-2290-g91bb64a8d2
"hw/nvme: Use pcie_sriov_num_vfs()" (CVE-2024-26328))
Commit 1901b4967c ("hw/block/nvme: move msix table and pba to BAR 0")
moved the MSI-X table and PBA to BAR 0 to make room for enabling CMR and
PMR at the same time. As reported by Julien Grall in #2184, this breaks
migration through system hibernation.
Add a machine compatibility parameter and set it on machines pre 6.0 to
enable the old behavior automatically, restoring the hibernation
migration support.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2184
Fixes: 1901b4967c ("hw/block/nvme: move msix table and pba to BAR 0")
Reported-by: Julien Grall julien@xen.org
Tested-by: Julien Grall julien@xen.org
Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit fa905f65c5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Generalize the mbar size helper such that it can handle cases where the
MSI-X table and PBA are expected to be in an exclusive bar.
Cc: qemu-stable@nongnu.org
Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit ee7bda4d38)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, when a VF is created, it uses the 'params' object of the PF
as it is. In other words, the 'params.serial' string memory area is also
shared. In this situation, if the VF is removed from the system, the
PF's 'params.serial' object is released with object_finalize() followed
by object_property_del_all() which release the memory for 'serial'
property. If that happens, the next VF created will inherit a serial
from a corrupted memory area.
If this happens, an error will occur when comparing subsys->serial and
n->params.serial in the nvme_subsys_register_ctrl() function.
Cc: qemu-stable@nongnu.org
Fixes: 44c2c09488 ("hw/nvme: Add support for SR-IOV")
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 4f0a4a3d58)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace the local Error variable with errp and ERRP_GUARD() and change
the return value to bool.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 973f76cf77)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: needed for v8.2.0-2319-gfa905f65c5
"hw/nvme: add machine compatibility parameter to enable msix exclusive bar")
Remove an unnecessary local Error value in nvme_realize(). In the
process, change nvme_check_constraints() to return a bool.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 784fd35387)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: needed for v8.2.0-2319-gfa905f65c5
"hw/nvme: add machine compatibility parameter to enable msix exclusive bar")
