Fixed by commit b3da551 ("fdc: Exit if ISA controller does not support DMA", 2018-03-16).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 2b9aef6fcd introduced a regression:
checkpatch.pl started complaining about the following valid pattern:
do {
/* something */
} while (condition);
Fix the script to once again permit this pattern.
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Message-Id: <1522029982-4650-1-git-send-email-suhang16@mails.ucas.ac.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was missed in the first version of OOB series. We should check this
to make sure we throw the right error when fault value is passed in.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-5-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
if '-w 16' was given as a cmdline args a local copy of insnmask
is set and not the global one.
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20180319115846.9662-1-kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixed in a0c167a184 ("x86_iommu: check
if machine has PCI bus").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cs4231a, gus and sb16 sound cards crash QEMU when the user tries
to instantiate them on a machine with DMA-less ISA bus (for example
with "qemu-system-mips64el -M mips -device sb16"). Add proper checks
to the realize functions to avoid the crashes.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If you pass scripts/get_maintainer.pl the name of a FIFO or other
exciting object (/dev/stdin, for example), it would falsely print
"file not found". Instead: stat the object rather than using -f so
that we do not mind if the object is not a file; and print the errno
value in the error message.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <1520535787-6223-13-git-send-email-ian.jackson@eu.citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
We've seen a few reports of
(gdb) source /usr/share/qemu-kvm/dump-guest-memory.py
Traceback (most recent call last):
File "/usr/share/qemu-kvm/dump-guest-memory.py", line 19, in <module>
UINTPTR_T = gdb.lookup_type("uintptr_t")
gdb.error: No type named uintptr_t.
This occurs when symbols haven't been loaded first, i.e. neither a
QEMU binary was loaded nor a QEMU process was attached first. Let's
better inform the user of how to fix the issue themselves in order
to avoid more reports.
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20180314153820.18426-1-drjones@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Here "oob" stands for "Out-Of-Band". When "allow-oob" is set, it means
the command allows out-of-band execution.
The "oob" idea is proposed by Markus Armbruster in following thread:
https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg02057.html
This new "allow-oob" boolean will be exposed by "query-qmp-schema" as
well for command entries, so that QMP clients can know which commands
can be used in out-of-band calls. For example the command "migrate"
originally looks like:
{"name": "migrate", "ret-type": "17", "meta-type": "command",
"arg-type": "86"}
And it'll be changed into:
{"name": "migrate", "ret-type": "17", "allow-oob": false,
"meta-type": "command", "arg-type": "86"}
This patch only provides the QMP interface level changes. It does not
contain the real out-of-band execution implementation yet.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-18-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase on introspection done by qlit]
Signed-off-by: Eric Blake <eblake@redhat.com>
Replace the generated json string with a literal qobject. The later is
easier to deal with, at run time as well as compile time: adding #if
conditionals will be easier than in a json string.
The output of query-qmp-schema is not changed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180305172951.2150-5-marcandre.lureau@redhat.com>
[eblake: fix python 3 failure]
Signed-off-by: Eric Blake <eblake@redhat.com>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
* Update kernel headers (Gerd, myself)
* SEV support (Brijesh)
I have not tested non-x86 compilation, but I reordered the SEV patches
so that all non-x86-specific changes go first to catch any possible
issues (which weren't there anyway :)).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJap/4yAAoJEL/70l94x66DmPoH/igfzYkxFyIHFqzb/hQEut3e
IJA05u9DBSqqdSvL0UeLdUgyJTeDM3S5kKZqZ38BPHIudwOGtydoIM2utWtPSejf
Z+mS77+dSgchEMgf1gxmD0oZ5TrO/2pdOYfaZZuQuGmGLruKsDgz6vH3F87cfk8b
yJSJkoZkFc8C9SpwQERWYuhXn2fYFxSBFgEMc9xSFN+zqQUFqeIfOJhwZ+txjAUl
y1EKlhhVyjkxTLR++SkzhKIJ8D5cycpcY/H19gw3ghHviY/tGwNLot3bLRPbwCM6
QvrXDf4rhvFHTmmOfliCI5y6Xgj0u7IZv2fVoKXEtKk1qyfyD4ZnouYTaqP/U9I=
=Q4/y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-sev' into staging
* Migrate MSR_SMI_COUNT (Liran)
* Update kernel headers (Gerd, myself)
* SEV support (Brijesh)
I have not tested non-x86 compilation, but I reordered the SEV patches
so that all non-x86-specific changes go first to catch any possible
issues (which weren't there anyway :)).
# gpg: Signature made Tue 13 Mar 2018 16:37:06 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream-sev: (22 commits)
sev/i386: add sev_get_capabilities()
sev/i386: qmp: add query-sev-capabilities command
sev/i386: qmp: add query-sev-launch-measure command
sev/i386: hmp: add 'info sev' command
cpu/i386: populate CPUID 0x8000_001F when SEV is active
sev/i386: add migration blocker
sev/i386: finalize the SEV guest launch flow
sev/i386: add support to LAUNCH_MEASURE command
target/i386: encrypt bios rom
sev/i386: add command to encrypt guest memory region
sev/i386: add command to create launch memory encryption context
sev/i386: register the guest memory range which may contain encrypted data
sev/i386: add command to initialize the memory encryption context
include: add psp-sev.h header file
sev/i386: qmp: add query-sev command
target/i386: add Secure Encrypted Virtualization (SEV) object
kvm: introduce memory encryption APIs
kvm: add memory encryption context
docs: add AMD Secure Encrypted Virtualization (SEV)
machine: add memory-encryption option
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A subsequent patch to add support for setting linkspeed/duplex in
virtio-net, requires a few definitions from ethtool.h, which ends up
pulling in kernel.h and sysinfo.h as well.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtio-dev@lists.oasis-open.org
So we can use the drm fourcc codes without a dependency on libdrm-devel.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The header file provide the ioctl command and structure to communicate
with /dev/sev device.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Note that VIRTIO_GPU_CAPSET_VIRGL2 was added manually so it has to be added
manually after re-running scripts/update-linux-headers.sh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
iQEcBAABAgAGBQJapqP6AAoJEJykq7OBq3PIZasIAL+NKBQGa/e0FD28PYdLU/JE
sKZZ0O6+eVTCejGXap4bzbKOy+qZyOXvaRk5KNREc5A9R8HFBt5GotMfE80Cw9Nt
rryX+qVdf4w27u2jMqY4215jD5jy/nPijRQ0a8UBsi6z2PXVPPNeS3lMB8RSFEZS
IZu+l3j1op1wUlM4GfZvLCjmgHC+73lk6a5xZLJ2UvH9UoqJepgVZnSs2YvOctzG
LVGMhk6/yAy4hh3NWx/M2h2B2ASMJJya8XrLgelAVnr6CxKBeBII0bSPur+1YIH7
OkJhNsk6QKSWNFKtzXE6N+y1ryWLnbE8vzKSZt+xSzUDjhnqTm5iFpZQ+Ed16qA=
=nCAn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 12 Mar 2018 15:59:54 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: only permit standard C types and fixed size integer types
trace: remove use of QEMU specific types from trace probes
trace: include filename when printing parser error messages
simpletrace: fix timestamp argument type
log-for-trace.h: Split out parts of log.h used by trace.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now the script works with Python 3, so we can use the 'python'
binary provided by the system.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180312185503.5746-4-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
On Python 3, json.dumps() return a str object, which can't be
sent directly through a socket and must be encoded into a bytes
object. Use .encode('utf-8'), which will work on both Python 2
and Python 3.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180312185503.5746-3-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
items() is less efficient on Python 2.x, but makes the code work
on both Python 2 and Python 3.
Cc: Lukáš Doktor <ldoktor@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180312185503.5746-2-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We are not running the script on "make check" yet, and additional
bugs were introduced recently in the tree.
Whitelist the new crashes while we investigate, to allow us to
run device-crash-test on "make check" as soon as possible to
prevent new bugs.
Cc: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180309202827.12085-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This script is a debugging tool for looking through the contents of a
replay log file. It is incomplete but should fail gracefully at events
it doesn't understand.
It currently understands two different log formats as the audio
record/replay support was merged during since MTTCG. It was written to
help debug what has caused the BQL changes to break replay support.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180227095310.1060.14500.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes, we want to refer to really long URLs, but checkpatch
balks, and we have to manually bypass the check. URL shorteners
may be nice at reducing long links, but it's hard to guarantee the
shortened link will live as long as the real target, and it is
also nice to see the original target without having to load the
shortened URL through a browser. So exempt a line containing
only a URL from the long-line syntax check.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180222215838.18223-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some trace backends will compile code based on the declared trace
events. It should not be assumed that the backends can resolve any QEMU
specific typedefs. So trace events should restrict their argument
types to the standard C types and fixed size integer types. Any complex
pointer types can be declared as "void *" for purposes of trace events,
since nothing will be dereferencing these pointer arguments.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180308155524.5082-3-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Improves error messages from:
ValueError: Error on line 72: need more than 1 value to unpack
To
ValueError: Error at /home/berrange/src/virt/qemu/trace-events:72:
need more than 1 value to unpack
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180306154650.24075-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The timestamp argument to a trace event method is documented as follows:
The method can also take a timestamp argument before the trace event
arguments:
def runstate_set(self, timestamp, new_state):
...
Timestamps have the uint64_t type and are in nanoseconds.
In reality methods with a timestamp argument actually receive a tuple
like (123456789,) as the timestamp argument. This is due to a bug in
simpletrace.py.
This patch unpacks the tuple so that methods receive the correct
timestamp argument type.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180222163901.14095-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A persistent build problem we see is where a source file
accidentally omits the #include of log.h. This slips through
local developer testing because if you configure with the
default (log) trace backend trace.h will pull in log.h for you.
Compilation fails only if some other backend is selected.
To make this error cause a compile failure regardless of
the configured trace backend, split out the parts of log.h
that trace.h requires into a new log-for-trace.h header.
Since almost all manual uses of the log.h functions will
use constants or functions which aren't in log-for-trace.h,
this will let us catch missing #include "qemu/log.h" more
consistently.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180213140029.8308-1-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add registry for audio drivers, using the existing audio_driver struct.
Make all drivers register themself. The old list of audio_driver struct
pointers is now a list of audio driver names, specifying the priority
(aka probe order) in case no driver is explicitly asked for.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180306074053.22856-2-kraxel@redhat.com
qemu-binfmt-conf.sh when it is used with systemd
needs to know for which CPU the systemd-binfmt.service
file must be created (i.e. "--systemd ppc").
But sometime, for instance for test purpose, we need to
create an entry for all known architectures.
This patch entroduce the "ALL" parameter for this purpose.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180308104859.3315-1-laurent@vivier.eu>
This adds RISC-V into the build system enabling the following targets:
- riscv32-softmmu
- riscv64-softmmu
- riscv32-linux-user
- riscv64-linux-user
This adds defaults configs for RISC-V, enables the build for the RISC-V
CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh'
script is updated to add the RISC-V ELF magic.
Expected checkpatch errors for consistency reasons:
ERROR: line over 90 characters
FILE: scripts/qemu-binfmt-conf.sh
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Adding check for `while` and `for` statements, which condition has more than
one line.
The former checkpatch.pl can check `if` statement, which condition has more
than one line, whether block misses brace round, like this:
'''
if (cond1 ||
cond2)
statement;
'''
But it doesn't do the same check for `for` and `while` statements.
Using `(?:...)` instead of `(...)` in regex pattern catch.
Because `(?:...)` is faster and avoids unwanted side-effect.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Message-Id: <1520319890-19761-1-git-send-email-suhang16@mails.ucas.ac.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_path_get_* do the same as g_strdup(basename/dirname(...)) but
without modifying the argument.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <1519987399-19160-1-git-send-email-jusual@mail.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Our qapi-schema.json is composed of modules connected by include
directives, but the generated code is monolithic all the same: one
qapi-types.h with all the types, one qapi-visit.h with all the
visitors, and so forth. These monolithic headers get included all
over the place. In my "build everything" tree, adding a QAPI type
recompiles about 4800 out of 5100 objects.
We wouldn't write such monolithic headers by hand. It stands to
reason that we shouldn't generate them, either.
Split up generated qapi-types.h to mirror the schema's modular
structure: one header per module. Name the main module's header
qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h.
Mirror the schema's includes in the headers, so that qapi-types.h gets
you everything exactly as before. If you need less, you can include
one or more of the sub-module headers. To be exploited shortly.
Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h,
qmp-commands.c, qapi-event.h, qapi-event.c the same way.
qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic.
The split of qmp-commands.c duplicates static helper function
qmp_marshal_output_str() in qapi-commands-char.c and
qapi-commands-misc.c. This happens when commands returning the same
type occur in multiple modules. Not worth avoiding.
Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and
qmp-commands.[ch] to qapi-commands.[ch], name the shards that way
already, to reduce churn. This requires temporary hacks in
commands.py and events.py. Similarly, c_name() must temporarily
be taught to munge '/' in common.py. They'll go away with the rename.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: declare a dummy variable in each .c file, to shut up OSX
toolchain warnings about empty .o files, including hacking c_name()]
Signed-off-by: Eric Blake <eblake@redhat.com>
guardname() fails to return a valid C identifier for arguments
containing anything but [A-Za-z0-9_.-']. Fix that. Don't bother
protecting ticklish identifiers; header guards are all-caps, and no
ticklish identifiers are.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180211093607.27351-22-armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Linking code from multiple separate QAPI schemata into the same
program is possible, but involves some weirdness around built-in
types:
* We generate code for built-in types into .c only with option
--builtins. The user is responsible for generating code for exactly
one QAPI schema per program with --builtins.
* We generate code for built-in types into .h regardless of
--builtins, but guarded by #ifndef QAPI_VISIT_BUILTIN. Because all
copies of this code are exactly the same, including any combination
of these headers works.
Replace this contraption by something more conventional: generate code
for built-in types into their very own files: qapi-builtin-types.c,
qapi-builtin-visit.c, qapi-builtin-types.h, qapi-builtin-visit.h, but
only with --builtins. Obey --output-dir, but ignore --prefix for
them.
Make qapi-types.h include qapi-builtin-types.h. With multiple
schemata you now have multiple qapi-types.[ch], but only one
qapi-builtin-types.[ch]. Same for qapi-visit.[ch] and
qapi-builtin-visit.[ch].
Bonus: if all you need is built-in stuff, you can include a much
smaller header. To be exploited shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-21-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: fix octal constant for python 3]
Signed-off-by: Eric Blake <eblake@redhat.com>
The use of QAPIGen is rather shallow so far: most of the output
accumulation is not converted. Take the next step: convert output
accumulation in the code-generating visitor classes. Helper functions
outside these classes are not converted.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-20-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: rebase to earlier guardstart cleanup]
Signed-off-by: Eric Blake <eblake@redhat.com>
All generated .c are named like their .h, except for qmp-marshal.c and
qmp-commands.h. To add to the confusion, tests-qmp-commands.c falsely
matches generated test-qmp-commands.h.
Get rid of this unnecessary complication.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The include directive permits modular QAPI schemata, but the generated
code is monolithic all the same. To permit generating modular code,
the front end needs to pass more information on inclusions to the back
ends. The commit before last added the necessary information to the
parse tree. This commit adds it to the intermediate representation
and its QAPISchemaVisitor. A later commit will use this to to
generate modular code.
New entity QAPISchemaInclude represents inclusions. Call new visitor
method visit_include() for it, so visitors can see the sub-modules a
module includes.
Note that unlike other entities, QAPISchemaInclude has no name, and is
therefore not added to entity_dict.
New QAPISchemaEntity attribute @module names the entity's source file.
Call new visitor method visit_module() when it changes during a visit,
so visitors can keep track of the module being visited.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-18-armbru@redhat.com>
[eblake: avoid accidental deletion of self._predefining]
Signed-off-by: Eric Blake <eblake@redhat.com>
The generators' conversion to visitors (merge commit 9e72681d16)
changed the processing order of entities from source order to
alphabetical order. The next commit needs source order, so change it
back.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-17-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The parse tree is a list of expressions. Except include expressions
currently get replaced by the included file's parse tree.
Instead of throwing away the include expression, keep it with the file
name expanded so you don't have to track the including file's
directory to make sense of it.
A future commit will put this include expression to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-16-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix check of expr after assignment]
Signed-off-by: Eric Blake <eblake@redhat.com>
Error messages print absolute file names of included files even if the
user gave a relative one on the command line:
$ PYTHONPATH=scripts python -B tests/qapi-schema/test-qapi.py tests/qapi-schema/include-cycle.json
In file included from tests/qapi-schema/include-cycle.json:1:
In file included from /work/armbru/qemu/tests/qapi-schema/include-cycle-b.json:1:
/work/armbru/qemu/tests/qapi-schema/include-cycle-c.json:1: Inclusion loop for include-cycle.json
Improve this to
In file included from tests/qapi-schema/include-cycle.json:1:
In file included from tests/qapi-schema/include-cycle-b.json:1:
tests/qapi-schema/include-cycle-c.json:1: Inclusion loop for include-cycle.json
The error message when an include file can't be opened prints the
include directive's file name, which is relative to the including
file. Change this to print the file name relative to the working
directory. Visible in tests/qapi-schema/include-no-file.err.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-12-armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A massive number of objects depends on QAPI-generated headers. In my
"build everything" tree, it's roughly 4800 out of 5100. This is
particularly annoying when only some of the generated files change,
say for a doc fix.
Improve qapi-gen.py to touch its output files only if they actually
change. Rebuild time for a QAPI doc fix drops from many minutes to a
few seconds. Rebuilds get faster for certain code changes, too. For
instance, adding a simple QMP event now recompiles less than 200
instead of 4800 objects. But adding a QAPI type is as bad as ever;
we've clearly got more work to do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180211093607.27351-11-armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: fix octal constant for python3]
Signed-off-by: Eric Blake <eblake@redhat.com>
argparse is nicer to use than getopt, and gives us --help almost for
free.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: Fix --output-dir editing accident]
Signed-off-by: Eric Blake <eblake@redhat.com>
Whenever qapi-schema.json changes, we run six programs eleven times to
update eleven files. Similar for qga/qapi-schema.json. This is
silly. Replace the six programs by a single program that spits out
all eleven files.
The programs become modules in new Python package qapi, along with the
helper library. This requires moving them to scripts/qapi/. While
moving them, consistently drop executable mode bits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: move change to one-line 'blurb' earlier in series, mention mode
bit change as intentional, update qapi-code-gen.txt to match actual
generated events.c file]
Signed-off-by: Eric Blake <eblake@redhat.com>
The next commit will introduce a common driver program for all
generators. The generators need to be modules for that. qapi2texi.py
already is. Make the other generators follow suit.
The changes are actually trivial. Obvious in the diffs once you view
them with whitespace changes ignored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-8-armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: minor tweak to keep 'blurb' one line]
Signed-off-by: Eric Blake <eblake@redhat.com>
In preparation of the next commit, which will turn the generators into
modules. These global variables will become local to main() then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-7-armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
These classes encapsulate accumulating and writing output.
Convert C code generation to QAPIGenC and QAPIGenH. The conversion is
rather shallow: most of the output accumulation is not converted.
Left for later.
The indentation machinery uses a single global variable indent_level,
even though we generally interleave creation of a .c and its .h. It
should become instance variable of QAPIGenC. Also left for later.
Documentation generation isn't converted, and QAPIGenDoc isn't used.
This will change shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-6-armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: fix nits spotted by Michael]
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename the variable holding the QAPISchemaGenFOOVisitor from gen to
vis, to avoid confusion in the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Each generator carries a copyright notice for the generator itself,
and another one for the files it generates. Only the former have been
updated along the way, the latter have not, and are all out of date.
Fix by copying the generator's copyright notice to the generated files
instead. Note that the fix doesn't copy the "Authors:" part; the
generated files' outdated Authors list goes away without replacement.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-4-armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Flatten each 'blurb' to one line]
Signed-off-by: Eric Blake <eblake@redhat.com>
Every generator has separate boilerplate for .h and .c, and their
differences are boring. All of them repeat the license note.
Reduce the repetition as follows. Move common text like the license
note to common open_output(), next to the existing common text there.
For each generator, replace the two separate descriptions by a single
one.
While there, emit an "automatically generated" note into generated
documentation, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-3-armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Allow the translate subroutines to return false for invalid insns.
At present we can of course invoke an invalid insn exception from within
the translate subroutine, but in the short term this consolidates code.
In the long term it would allow the decodetree language to support
overlapping patterns for ISA extensions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227232618.2908-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To be used to decode ARM SVE, but could be used for any fixed-width ISA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Previously functions having arguments of type bool was not traced
properly. The bool arguments were missing from the trace.
Signed-off-by: Jon Emil Jahren <jonemilj@gmail.com>
Message-id: 20180129041648.30884-3-jonemilj@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using the greedy star matching, arguments like "...%"PRIx64 caused issues
for functions with multiple PRI formats.
The issue was only seen with the ust backend, as it is the only one
using the format regex.
The result for many functions was that the arguments coming after the
greedy star end was left out of the tracepoint, and in some cases some
of the arguments that was traced had the wrong format.
Signed-off-by: Jon Emil Jahren <jonemilj@gmail.com>
Message-id: 20180129041648.30884-2-jonemilj@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Modify the script to import the headers used by the pvrdma device.
Part of them are interfaces between the guest driver and the device,
import them under include/standart-headers/drivers/infiniband/... .
Remove the unused functions from pvrdma_verbs.h avoiding the
unnecessary import of several infiniband/networking/other headers.
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
As was last done in 379e21c25, we don't want .git files for
submodules here, which we aren't presently doing for capstone and
keycodemapdb.
Rather than delete the offending files before archiving, ask tar
to --exclude=.git
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
qapi/qmp/types.h is a convenience header to include a number of
qapi/qmp/ headers. Since we rarely need all of the headers
qapi/qmp/types.h includes, we bypass it most of the time. Most of the
places that use it don't need all the headers, either.
Include the necessary headers directly, and drop qapi/qmp/types.h.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-9-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
If a VM is launched, files are created and a cleanup is required before
a new launch. This cleanup is executed by shutdown(), so shutdown() must
be called even if the VM is manually terminated (i.e. using kill).
This patch creates a control to make sure launch() will not be executed
again if shutdown() is not called after the previous launch().
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20180122205033.24893-7-apahim@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that shutdown() is guaranteed to always execute self._load_io_log()
and self._post_shutdown(), their calls in 'except' became redundant and
we can safely replace it by a call to shutdown().
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20180122205033.24893-6-apahim@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The 'returncode' Popen attribute is not guaranteed to be updated. It
actually depends on a call to either poll(), wait() or communicate().
On the other hand, poll() will: "Check if child process has terminated.
Set and return returncode attribute."
Let's use the poll() to check whether the process is running and to get
the updated process exit code, when the process is finished.
Reviewed-by: Fam Zheng <famz@redhat.com>
eviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20180122205033.24893-5-apahim@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently we only cleanup on shutdown() if the VM is running.
To make sure we will always cleanup, this patch makes the
self._load_io_log() and the self._post_shutdown() to
always be called on shutdown(), regardless the VM running state.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20180122205033.24893-4-apahim@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This is just a refactor to separate the exception handler from the
actual launch procedure, improving the readability and making future
maintenances in this piece of code easier.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20180122205033.24893-3-apahim@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To launch a VM, we need to create basically two files: the monitor
socket (if it's a UNIX socket) and the qemu log file.
For the qemu log file, we currently just open the path, which will
create the file if it does not exist or overwrite the file if it does
exist.
For the monitor socket, if it already exists, we are currently removing
it, even if it's not created by us.
This patch moves to _pre_launch() the responsibility to create a
temporary directory to host the files so we can remove the whole
directory on _post_shutdown().
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20180122205033.24893-2-apahim@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-10-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some early python 3.x versions will have different default
ordering when calling the 'values()' method on a dict, compared
to python 2.x and later 3.x versions. Explicitly sort the items
to get a stable ordering.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-8-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-6-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-5-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The OrderedDict class appeared in the 'collections' module
from python 2.7 onwards, so use that in preference to our
local backport if available.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-4-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The iteritems()/itervalues() methods are gone in py3, but the
items()/values() methods are still around. The latter are less
efficient than the former in py2, but this has unmeasurably
small impact on QEMU build time, so taking portability over
efficiency is a net win.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Python 3 no longer supports the bare "print" statement, it must be
called as a normal function with round brackets. It is possible to
opt-in to this new syntax with Python 2.6 onwards by importing the
"print_function" from the "__future__" module, making it easy to
support Python 2 and 3 in parallel.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This is required otherwise python complains because of the
accentuated letter in Alex's last name:
Traceback (most recent call last):
File "scripts/qemu-gdb.py", line 29, in <module>
from qemugdb import aio, mtree, coroutine, tcg, timers
File "scripts/qemugdb/timers.py", line 1
SyntaxError: Non-ASCII character '\xc3' in file scripts/qemugdb/timers.py
on line 1, but no encoding declared;
see http://www.python.org/peps/pep-0263.html for details
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <151629549711.18276.15497684562308683805.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On some architectures, qemu doesn't support vmcoreinfo device,
and dump-guest-memory fails:
(gdb) dump-guest-memory /tmp/vmcore ppc64-le
guest RAM blocks:
target_start target_end host_addr message count
---------------- ---------------- ---------------- ------- -----
0000000000000000 0000000200000000 00003ffd86980000 added 1
0000200080000000 0000200080800000 00003ffd86170000 added 2
Python Exception <class 'gdb.error'> No symbol "vmcoreinfo_realize" in current context.:
Error occurred in Python command: No symbol "vmcoreinfo_realize" in current context.
Check that vmcoreinfo_realize symbol exists before evaluating an
expression with it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
C functions with no arguments must be declared foo(void) instead of
foo(). The tracetool argument list parser has never accepted an empty
argument list. This patch adds a clear error message for this error
case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180110202553.31889-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The terminology used by tracetool is not consistent with C sprintf or
docs/devel/tracing.txt. The word "formats" is sometimes used to mean
"format strings".
This patch clarifies comments and error messages that contain this word.
Note that the error message lines are longer than 80 characters but I
have not wrapped them to aid grepping.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180110202553.31889-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Include the file line number in the message that is printed when
trace-events parse errors are raised.
[Use enumerate(fobj, 1) to avoid having to increment a 0-based index
later, as suggested by Eric Blake.
--Stefan]
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180110202553.31889-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
v2:
* Drop merge failure from a previous pull request that broke virtio-blk on ARM
guests
* Add Parallels XML patch series
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaZgqoAAoJEJykq7OBq3PIwNIIAKD8OwjeQdtznD88ikMGd5CF
PvBHOIXIX7GCaKdAFEP1MMB0xaTN93zhphPZfcQxnnbi2LrnzuP2WCSunKPPcGQJ
ToMRxYV+OkS0Rm8/us9fQpmBf2PKouIlNXP4jZZuEYAmyZgoU7YBQHYP1sw2K6RE
MHPBdKMKzb+S8u+HBx+oy1LQ0cKKRjCYXhdQ4p7rlWkXc5irQQh9d12W/EHS++cd
5wgX5V3aj4rXD4XwXY/kgDXtSG37sgNOHx77W7gDO3KuBolEBVvPvbP7yrCZzfcC
pGLPKwXnHTxOKlwLQ0weD+uIsJWv6XGKLhgX+MFWCVU1PvPuSTWcqfBplgTUU6s=
=mjmD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
v2:
* Drop merge failure from a previous pull request that broke virtio-blk on ARM
guests
* Add Parallels XML patch series
# gpg: Signature made Mon 22 Jan 2018 16:00:40 GMT
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
block/parallels: add backing support to readv/writev
block/parallels: replace some magic numbers
block/parallels: move some structures into header
configure: add dependency
docs/interop/prl-xml: description of Parallels Disk format
block: add block_set_io_throttle virtio-blk-pci QMP example
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This dependency is required for adequate Parallels images support.
Typically the disk consists of several images which are glued by
XML disk descriptor. Also XML hides inside several important parameters
which are not available in the image header.
The patch also adds clause to checkpatch.pl to understand libxml2 types.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180112090122.1702-3-klim.kireev@virtuozzo.com
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Python GDB support may use Python 2 or 3.
Inferior.read_memory() may return a 'buffer' with Python 2 or a
'memoryview' with Python 3 (see also
https://sourceware.org/gdb/onlinedocs/gdb/Inferiors-In-Python.html)
The elf.add_vmcoreinfo_note() method expects a "bytes" object. Wrap
the returned memory with bytes(), which works with both 'memoryview'
and 'buffer'.
Fixes a regression introduced with commit
d23bfa91b7 ("add vmcoreinfo").
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
These are crashes / errors which have been fixed already in the past
months. We can remove these from the device-crash-test script now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1513613438-11017-1-git-send-email-thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This script allows analysis of mutex acquisition and hold times based
on a trace file. Given a trace control file of:
qemu_mutex_lock
qemu_mutex_locked
qemu_mutex_unlock
And running with:
$QEMU $QEMU_ARGS -trace events=./lock-trace
You can analyse the results with:
./scripts/analyse-locks-simpletrace.py trace-events-all ./trace-21812
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use of a loop construct for code that is not intended to repeat
does not make much idiomatic sense, except in one place: it is a
common usage in macros in order to wrap arbitrary code with
single-statement semantics. But when used in a macro, it is more
typical for the caller to supply the trailing ';' when calling
the macro.
Although qemu coding style frowns on bare:
if (cond)
statement1;
else
statement2;
where extra semicolons actually cause syntax errors, we still
want our macro styles to be easily copied to other projects.
Thus, declare it an error if we encounter any form of 'while (0)'
with a semicolon in the same line.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171201232433.25193-8-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces the qemu-gdb command "qemu timers" which will dump the
state of the main timers in the system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 3a38429748 ("Add a "no HPT" encoding to HTAB migration stream")
the HTAB migration stream contains a header set to "-1", meaning there
is no HPT. Teach analyze-migration.py to ignore the section in this case.
Without this fix, the script fails with a dump from a POWER9 guest:
Traceback (most recent call last):
File "./qemu/scripts/analyze-migration.py", line 602, in <module>
dump.read(dump_memory = args.memory)
File "./qemu/scripts/analyze-migration.py", line 539, in read
section.read()
File "./qemu/scripts/analyze-migration.py", line 250, in read
self.file.readvar(n_valid * self.HASH_PTE_SIZE_64)
File "./qemu/scripts/analyze-migration.py", line 64, in readvar
raise Exception("Unexpected end of %s at 0x%x" % (self.filename, self.file.tell()))
Exception: Unexpected end of migrate.dump at 0x1d4763ba
Fixes: 3a38429748 ("Add a "no HPT" encoding to HTAB migration stream")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
armeb is missing from the target list in qemu-binfmt-conf.sh. Add it so
the handler for those binaries gets registered by the script.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-8-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Give big-endian arm and aarch64 CPUs their own family in
qemu-binfmt-conf.sh to make sure we register qemu-user for binaries of
the opposite endianness on arm and aarch64. Apart from the family
assignments of the magic values, qemu_get_family() needs to be able to
distinguish the two and recognise aarch64{,_be} as well.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-7-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we now have a linux-user aarch64_be target, we can add it to the list
of supported targets in qemu-binfmt-conf.sh
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-6-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's a deprecated dummy device since QEMU v2.6.0. That should have
been enough time to allow the users to update their scripts in case
they still use it, so let's remove this legacy code now.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the script is run with a core (no running process), it produces an
error:
(gdb) dump-guest-memory /tmp/vmcore X86_64
guest RAM blocks:
target_start target_end host_addr message count
---------------- ---------------- ---------------- ------- -----
0000000000000000 00000000000a0000 00007f7935800000 added 1
00000000000a0000 00000000000b0000 00007f7934200000 added 2
00000000000c0000 00000000000ca000 00007f79358c0000 added 3
00000000000ca000 00000000000cd000 00007f79358ca000 joined 3
00000000000cd000 00000000000e8000 00007f79358cd000 joined 3
00000000000e8000 00000000000f0000 00007f79358e8000 joined 3
00000000000f0000 0000000000100000 00007f79358f0000 joined 3
0000000000100000 0000000080000000 00007f7935900000 joined 3
00000000fd000000 00000000fe000000 00007f7934200000 added 4
00000000fffc0000 0000000100000000 00007f7935600000 added 5
Python Exception <class 'gdb.error'> You can't do that without a process to debug.:
Error occurred in Python command: You can't do that without a process
to debug.
Replace the object_resolve_path_type() function call with a local
volatile variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
cpu_restore_state officially supports being passed an address it can't
resolve the state for. As a result the checks in the helpers are
superfluous and can be removed. This makes the code consistent with
other users of cpu_restore_state.
Of course this does nothing to address what to do if cpu_restore_state
can't resolve the state but so far it seems this is handled elsewhere.
The change was made with included coccinelle script.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[rth: Fixed up comment indentation. Added second hunk to script to
combine cpu_restore_state and cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This assumes that the comment gives some justification;
"volatile sig_atomic_t" is also self-explanatory and usually
correct.
Discussed in:
'[Qemu-devel] [PATCH] dump-guest-memory.py: fix "You can't do that without a process to debug"'
Suggested-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20171215181810.4122-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a string instead of a list of strings. While there, generate
fewer superfluous blank lines.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002141341.24616-10-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Use a string instead of a list of strings.
This makes qapi2texi.py generate additional blank lines. They're
harmless, and the next commit will get rid of them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002141341.24616-9-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
We have two representations of sections without a name: the main
section uses name=None, the others name=''. Standardize on name=None.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002141341.24616-8-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Repurposing the function parameter doc for stepping through
doc.sections.__str__() is not nice. Use new variable @text instead.
While there, eliminate variables name and func.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002141341.24616-7-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
QAPISchemaParser.cur_doc is used only by .__init__() and its helper
.reject_expr_doc(). Make it local to __init__() and pass it to
.reject_expr_doc() explicitly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002141341.24616-5-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit 1d8bda1 got rid of #optional tags, and added a check to keep
them from getting added back, to make sure patches then in flight
don't add them back. It's been six months, time to drop that check.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002141341.24616-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit 43f187a broke --help: it put colons into blank lines. It
removed the colon from DEFHEADING(TITLE:) and added it back in the
macro expansion of DEFHEADING(TITLE), so hxtool can emit "@subsection
TITLE" more easily. Trouble is it's added back even for the blank
lines made with DEFHEADING().
Put the colons back where they were before commit 43f187a, and strip
them in hxtool instead.
Cc: Paolo Bonzini <pbonzini@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002140307.5292-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When qemu is compiled without debug, the dump gdb python script can fail with:
Error occurred in Python command: No symbol "vmcoreinfo_find" in current context.
Because vmcoreinfo_find() is inlined and not exported.
Use the underlying object_resolve_path_type() to get the instance instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We no longer support the old s390 transport, neither does the newest
Linux kernel. Remove it from the linux header script as well as the
s390x virtio code. We still should handle the VIRTIO_NOTIFY hypercall,
to tolerate early printk on older guest kernels without an sclp console.
We continue to ignore these events.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20171115154223.109991-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
qemu.org enabled HTTPS in 2017 and it should be used instead of HTTP.
There are also URLs to json.org, openvpn.net, and other domains that
support HTTPS.
This patch updates the qemu.org domains everywhere and also third-party
domains that I have checked.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171121120435.28728-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The owner of qemu.org has delegated authority to modify DNS records to
the QEMU Project. This has allowed us to use the domain name without
worries about IP address changes or technical issues disrupting service.
The issues described in commit 8593898109
("Use qemu-project.org domain name") have therefore been mitigated.
This patch switches back to consistently using qemu.org instead of
qemu-project.org in documentation, version.rc, and the Windows installer
script.
The git submodules and SeaBIOS still use qemu-project.org for the time
being. This will be fixed in the QEMU 2.12 release cycle.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171121120435.28728-2-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The u-boot sources we ship currently cause problems with unpacking on
a case-insensitive filesystem due to path conflicts. This has been
fixed in upstream u-boot via commit 610eec7f, but since it is not
yet included in an official release we implement this approach as a
temporary workaround.
Once we move to a u-boot containing commit 610eec7f we should revert
this patch.
Cc: qemu-stable@nongnu.org
Cc: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20171107205201.10207-1-mdroth@linux.vnet.ibm.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Besides the macro itself, this patch also adds a corresponding
Coccinelle rule.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20171114180128.17076-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The minus sign after << causes the shell to strip only
preceding tabs, not spaces.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20171110090354.29608-1-kraxel@redhat.com>
Fixes: 40bf8e9aed
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We short circuit the git submodule update when passed an empty module list.
This accidentally causes the 'status' command to write to the status file. The
test needs to be delayed into the individual commands to avoid this premature
writing of the status file.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If going back in time in git history, across a commit that introduces a new
submodule, the 'git-submodule.sh' script will fail, causing rebuild to fail.
This is because config-host.mak contains a GIT_SUBMODULES variable that lists
a submodule that only exists in the later commit. config-host.mak won't get
repopulated until config.status is invoked, but make won't get this far due to
the submodule error.
This change makes 'git-submodule.sh' check whether each module is known to git
and drops any which are not present. A warning message will be printed when any
submodule is dropped in this manner.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some people building QEMU use VPATH builds where the source directory is on a
read-only volume. In such a case 'scripts/git-submodules.sh update' will always
fail and users are required to run it manually themselves on their original
writable source directory.
While this is already supported, it is nice to give users a command line flag
to configure to permanently disable automatic submodule updates, as it means
they won't get hard to diagnose failures from git-submodules.sh at an arbitrary
later date.
This patch thus introduces a flag '--disable-git-update' which will prevent
'make' from ever running 'scripts/git-submodules.sh update'. It will still run
the 'status' command to determine if a submodule update is needed, but when it
does this it'll simply stop and print a message instructing the developer what
todo. eg
$ ./configure --target-list=x86_64-softmmu --disable-git-update
...snip...
$ make
GEN config-host.h
GEN trace/generated-tcg-tracers.h
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN module_block.h
GIT submodule checkout is out of date. Please run
scripts/git-submodule.sh update ui/keycodemapdb
from the source directory checkout /home/berrange/src/virt/qemu
make: *** [Makefile:31: git-submodule-update] Error 1
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are cases where users do VPATH builds with the source directory being on
a read-only volume. In such a case they have to manually run the command
'git-submodule.sh ...modules...' ahead of time. When checking for status we
should not then write into the source dir.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some users can't run a bare 'git' command, due to need for a transparent
proxying solution such as 'tsocks'. This adds an argument to configure to
let users specify such a thing:
./configure --with-git="tsocks git"
The submodule script is also updated to give the user a hint about using this
flag, if we fail to checkout modules.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Legacy PCI device assignment has been removed from Linux in 4.12,
and had been deprecated 2 years ago there. We can remove it from
QEMU as well.
The ROM loading code was shared with Xen PCI passthrough, so move
it to hw/xen.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The stderr from git is important if git fails to checkout modules
due to network problems, or other unexpected errors.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20171020130748.22983-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use TPMBackendClass to hold class methods/fields.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a
data file mapping between all the different scancode/keycode/keysym
sets that are known, and a tool to auto-generate lookup tables for
different combinations.
It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys.
Using it in QEMU will let us replace many hand written lookup
tables with auto-generated tables from a master data source,
reducing bugs. Adding new QKeyCodes will now only require the
master table to be updated, all ~20 other tables will be
automatically updated to follow.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-4-berrange@redhat.com
[ kraxel: fix build ]
[ kraxel: switch repo to qemu.git mirror ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building the tarball to pass into the docker/vm test image,
the code relies on the git submodules being checked out in the
main checkout.
ie if the developer has not run 'git submodule update --init dtc'
many of the docker tests will fail due to the libfdt package not
being present in the test images. Patchew manually checks out the
dtc submodule in the main git checkout, but this is a bad idea.
When running tests we want to have a predictable set of submodules
included in the source that's tested. The build environment is
completely independent of the developers host OS, so the submodules
the developer has checked out should not be considered relevant for
the tests.
This changes the archive-source.sh script so that it clones the
current git checkout into a temporary directory, checks out a
fixed set of submodules, builds the tarball and finally removes
the temporary git clone.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently if DTC is required by configure and not available in the host
OS install, we exit with an error message telling the user to checkout a
git submodule or install the library.
This introduces automatic handling of the git submodule checkout process
and enables it for dtc. This only runs if building from GIT, so users of
release tarballs still need the system library install. The current state
of the git checkout is stashed in .git-submodule-status, and a helper
program is used to determine if this state matches the desired submodule
state. A dependency against 'Makefile' ensures that the submodule state
is refreshed at the start of the build process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-2-berrange@redhat.com
[ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ]
[ kraxel: fix Makefile dependencies ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[fixup] Makefile dep
Add a vmcoreinfo ELF note in the dump if vmcoreinfo device has the
memory location details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
stgit produces patch files that lack the ".patch" extensions. Others
might be using ".diff" too. But since we are already limiting source files
to only a handful of extensions, we can reuse that in the mode selection
code.
While at it, do not match "../foo" as a branch name.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All scripts that use the QEMUMachine and QEMUQtestMachine classes
(device-crash-test, tests/migration/*, iotests.py, basevm.py)
already configure logging.
The basicConfig() call inside QEMUMachine.__init__() is being
kept just to make sure a script would still work if it didn't
configure logging.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171005172013.3098-4-ehabkost@redhat.com>
Reviewed-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use logging module for the QMP debug messages. The only scripts
that set debug=True are iotests.py and guestperf/engine.py, and
they already call logging.basicConfig() to set up logging.
Scripts that don't configure logging are safe as long as they
don't need debugging output, because debug messages don't trigger
the "No handlers could be found for logger" message from the
Python logging module.
Scripts that already configure logging but don't use debug=True
(e.g. scripts/vm/basevm.py) will get QMP debugging enabled for
free.
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Cc: Fam Zheng <famz@redhat.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171005172013.3098-3-ehabkost@redhat.com>
Reviewed-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Do not use '/r' modifier which was introduced in perl 5.14.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Fixes: 3e5875afc0f ("checkpatch: check trace-events code style")
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: 20171004154420.34596-1-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a firmware path config option to configure. Multiple directories
are accepted, with the usual colon as separator. Default value is
${prefix}/share/qemu-firmware. The path is searched in addition to the
current search path (typically ${prefix}/share/qemu).
This prepares qemu for the planned split of the prebuilt firmware blobs
into a separate project.
Distributions can also use this to get rid of the firmware symlink farm
and add -- for example -- /usr/share/seabios to the firmware path
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170914114236.25343-3-kraxel@redhat.com
Not all scripts using qemu.py configure the Python logging
module, and end up generating a "No handlers could be found for
logger" message instead of actual log messages.
To avoid requiring every script using qemu.py to configure
logging manually, call basicConfig() when creating a QEMUMachine
object. This won't affect scripts that already set up logging,
but will ensure that scripts that don't configure logging keep
working.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Fixes: 4738b0a85a
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170921162234.847-1-ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The script doesn't know about all possible types and learn them as
it parses the code. If it reaches a line with a type cast but the
type isn't known yet, it is misinterpreted as an identifier.
For example the following line:
foo = (hwaddr) -1;
results in the following false-positive to be reported:
ERROR: spaces required around that '-' (ctx:VxV)
Let's add this standard QEMU type to the list of pre-known types.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <150538015789.8149.10902725348939486674.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently before submitting a series, devs should run checkpatch.pl
across each patch to be submitted. This can be automated using a
command such as:
git rebase -i master -x 'git show | ./scripts/checkpatch.pl -'
This is rather long winded to type, so this patch introduces a way
to tell checkpatch.pl to validate a series of GIT revisions.
There are now three modes it can operate in 1) check a patch 2) check a source
file, or 3) check a git branch.
If no flags are given, the mode is determined by checking the args passed to
the command. If the args contain a literal ".." it is treated as a GIT revision
list. If the args end in ".patch" or equal "-" it is treated as a patch file.
Otherwise it is treated as a source file.
This automatic guessing can be overridden using --[no-]patch --[no-]file or
--[no-]branch
For example to check a GIT revision list:
$ ./scripts/checkpatch.pl master..
total: 0 errors, 0 warnings, 297 lines checked
b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission.
total: 0 errors, 0 warnings, 182 lines checked
2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission.
total: 0 errors, 0 warnings, 102 lines checked
11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission.
If a genuine patch filename contains the characters '..' it is
possible to force interpretation of the arg as a patch
$ ./scripts/checkpatch.pl --patch master..
will force it to load a patch file called "master..", or equivalently
$ ./scripts/checkpatch.pl --no-branch master..
will simply turn off guessing of GIT revision lists.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170913091000.9005-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All definitions related to Hyper-V emulation are now taken from the QEMU
own header, so the one imported from the kernel is no longer needed.
Unfortunately it's included by kvm_para.h.
So, until this is fixed in the kernel, teach the header harvesting
script to substitute kernel's hyperv.h with a dummy.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20170713201522.13765-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Python requires parentheses around multiline expression. This fixes the
breakage of all Python-based qemu-iotests cases that was introduced in
commit dab91d9aa0.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170918052524.4045-1-kwolf@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When launching a VM, if an exception happens and the VM is not
initiated, it might be useful to see the qemu command line and
the qemu command output.
This patch creates that message. Notice that self._iolog needs to be
cleaned up in the beginning of the launch() to make sure we will not
expose the qemu log from a previous launch if the current one fails.
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20170901112829.2571-6-apahim@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current message shows 'self._args', which contains only part of the
options used in the Qemu command line.
This patch makes the qemu full args list an instance variable and then
uses it in the negative exit code message.
Message was moved outside the 'if is_running' block to make sure it will
be logged if the VM finishes before the call to shutdown().
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20170901112829.2571-5-apahim@redhat.com>
[ehabkost: removed superfluous parenthesis]
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This module should not write directly to stdout/stderr. Instead, it
should either raise exceptions or just log the messages and let the
callers handle them and decide what to do. For example, scripts could
choose to send the log messages stderr or/and write them to a file if
verbose or debugging mode is enabled.
This patch replaces the writes to stderr by an exception in the
send_fd_scm() when _socket_scm_helper is not set or not present. In the
same method, the subprocess Popen will now redirect the stdout/stderr to
logging.debug instead of writing to system stderr. As consequence, since
the Popen.communicate() is now used (in order to get the stdout), the
further call to wait() became redundant and was replaced by
Popen.returncode.
The shutdown() message on negative exit code will now be logged
to logging.warn instead of written to system stderr.
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20170901112829.2571-3-apahim@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
is_running() returns None when called before the first time we
call launch():
>>> import qemu
>>> vm = qemu.QEMUMachine('qemu-system-x86_64')
>>> vm.is_running()
>>>
It should return False instead. This patch fixes that.
For consistence, this patch removes the parenthesis from the
second clause as it's not really needed.
Signed-off-by: Amador Pahim <apahim@redhat.com>
Message-Id: <20170901112829.2571-2-apahim@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
No actual code changes, just few pylint/style fixes.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20170818142613.32394-11-ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The "id" is a builtin method to get object's identity and should not be
overridden. This might bring some issues in case someone was directly
calling "cmd(..., id=id)" but I haven't found such usage on brief search
for "cmd\(.*id=".
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170818142613.32394-10-ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The "has_key" is deprecated in favor of "__in__" operator.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170818142613.32394-9-ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There is no need to define QEMUMonitorProtocol as old-style class.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170818142613.32394-8-ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
No actual code changes, just initializing attributes earlier to avoid
AttributeError on early introspection, a few pylint/style fixes and
docstring clarifications.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170818142613.32394-7-ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The naked Exception should not be widely used. It makes sense to be a
bit more specific and use better-suited custom exceptions. As a benefit
we can store the full reply in the exception in case someone needs it
when catching the exception.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170818142613.32394-6-ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The QMP key conversion consist of '_'s to be replaced with '-'s, which
can easily be done by a single `str.replace` method which is faster and
does not require `string` module import.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170818142613.32394-5-ldoktor@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's avoid creating an in-memory list of keys and query for each value
and use `iteritems` which is an iterator of key-value pairs.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170818142613.32394-4-ldoktor@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The list object is mutable in python and potentially might modify other
object's arguments when used as default argument. Reproducer:
>>> vm1 = QEMUMachine("qemu")
>>> vm2 = QEMUMachine("qemu")
>>> vm1._wrapper.append("foo")
>>> print vm2._wrapper
['foo']
In this case the `args` is actually copied so it would be safe to keep
it, but it's not a good practice to keep it. The same issue applies in
inherited qtest module.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20170818142613.32394-3-ldoktor@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
No actual code changes, just several pylint/style fixes and docstring
clarifications.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170818142613.32394-2-ldoktor@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
QEMU currently crashes when the user tries to add a spapr-cpu-core
on a non-pseries machine:
$ qemu-system-ppc64 -S -machine ppce500,accel=tcg \
-device POWER5+_v2.1-spapr-cpu-core
hw/ppc/spapr_cpu_core.c:178:spapr_cpu_core_realize_child:
Object 0x55cee1f55160 is not an instance of type spapr-machine
Aborted (core dumped)
So let's add a proper check for the correct machine time with
a more friendly error message here.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently exits unexpectedly when the user accidentially
tries to do something like this:
$ aarch64-softmmu/qemu-system-aarch64 -S -M integratorcp -nographic
QEMU 2.9.93 monitor - type 'help' for more information
(qemu) device_add allwinner-a10
Unsupported NIC model: smc91c111
Exiting just due to a "device_add" should not happen. Looking closer
at the the realize and instance_init function of this device also
reveals that it is using serial_hds and nd_table directly there, so
this device is clearly not creatable by the user and should be marked
accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1503416789-32080-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are a number of ways to ensure that the QEMU process is shut down
when the test ends, including atexit.register(), try: finally:, or
unittest.teardown() methods. All of these require extra code and the
programmer must remember to add vm.shutdown().
A nice solution is context managers:
with VM(binary) as vm:
...
# vm is guaranteed to be shut down here
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20170824072202.26818-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all usages have been converted to user lookup helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-14-marcandre.lureau@redhat.com>
[Rebased, superfluous local variable dropped, missing
check-qom-proplist.c update added]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-17-git-send-email-armbru@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The conflict check added by commit c0644771 ("qapi: Reject
alternates that can't work with keyval_parse()") doesn't work
with the following declaration:
{ 'alternate': 'Alt',
'data': { 'one': 'bool',
'two': 'str' } }
It crashes with:
Traceback (most recent call last):
File "./scripts/qapi-types.py", line 295, in <module>
schema = QAPISchema(input_file)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 1468, in __init__
self.exprs = check_exprs(parser.exprs)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 958, in check_exprs
check_alternate(expr, info)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 830, in check_alternate
% (name, key, types_seen[qtype]))
KeyError: 'QTYPE_QSTRING'
This happens because the previously-seen conflicting member
('one') can't be found at types_seen[qtype], but at
types_seen['QTYPE_BOOL'].
Fix the bug by moving the error check to the same loop that adds
new items to types_seen, raising an exception if types_seen[qt]
is already set.
Add two additional test cases that can detect the bug.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170717180926.14924-1-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The minimum Python version supported by QEMU is 2.6. The argparse
standard library module was only added in Python 2.7. Many scripts
would like to use argparse because it supports command-line
sub-commands.
This patch adds argparse. See the top of argparse.py for details.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 20170825155732.15665-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The simpletrace.py script can pretty-print flight recorder ring buffers.
These are not full simpletrace binary trace files but just the end of a
trace file. There is no header and the event ID mapping information is
often unavailable since the ring buffer may have filled up and discarded
event ID mapping records.
The simpletrace.stp script that generates ring buffer traces uses the
same trace-events-all input file as simpletrace.py. Therefore both
scripts have the same global ordering of trace events. A dynamic event
ID mapping isn't necessary: just use the trace-events-all file as the
reference for how event IDs are numbered.
It is now possible to analyze simpletrace.stp ring buffers again using:
$ ./simpletrace.py trace-events-all path/to/ring-buffer
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170815084430.7128-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a partial revert of commit
7f1b588f20 ("trace: emit name <-> ID
mapping in simpletrace header"), which broke the SystemTap flight
recorder because event mapping records may not be present in the ring
buffer when the trace is analyzed. This means simpletrace.py
--no-header does not know the event ID mapping needed to pretty-print
the trace.
Instead of numbering events dynamically, use a static event ID mapping
as dictated by the event order in the trace-events-all file.
The simpletrace.py script also uses trace-events-all so the next patch
will fix the simpletrace.py --no-header option to take advantage of this
knowledge.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170815084430.7128-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
According to CODING_STYLE, check that in trace-events:
1. hex numbers are prefixed with '0x'
2. '#' flag of printf is not used
3. The exclusion from 1. are period-separated groups of numbers
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170731160135.12101-4-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU keeps track of trace event enabled/disabled state and provides
monitor commands to inspect and modify the "dstate". SystemTap and
LTTng UST maintain independent enabled/disabled states for each trace
event, the other backends rely on QEMU dstate.
Introduce a new per-event macro that combines backend-specific dstate
like this:
#define TRACE_MY_EVENT_BACKEND_DSTATE() ( \
QEMU_MY_EVENT_ENABLED() || /* SystemTap */ \
tracepoint_enabled(qemu, my_event) /* LTTng UST */ || \
false)
This will be used to extend trace_event_get_state() in the next patch.
[Daniel Berrange pointed out that QEMU_MY_EVENT_ENABLED() must be true
by default, not false. This way events will fire even if the DTrace
implementation does not implement the SystemTap semaphores feature.
Ubuntu Precise uses lttng-ust-dev 2.0.2 which does not have
tracepoint_enabled(), so we need a compatibility wrapper to keep Travis
builds passing.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170731140718.22010-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fixup! trace: add TRACE_<event>_BACKEND_DSTATE()
The simpletrace compatibility code for systemtap creates a
function and some global variables for mapping to event ID
numbers. We generate multiple -simpletrace.stp files though,
one per target and systemtap considers functions & variables
to be globally scoped, not per file. So if trying to use the
simpletrace compat probes, systemtap will complain:
# stap -e 'probe qemu.system.arm.simpletrace.visit_type_str { print( "hello")}'
semantic error: conflicting global variables: identifier 'event_name_to_id_map' at /usr/share/systemtap/tapset/qemu-aarch64-simpletrace.stp:3:8
source: global event_name_to_id_map
^
identifier 'event_name_to_id_map' at /usr/share/systemtap/tapset/qemu-system-arm-simpletrace.stp:3:8
source: global event_name_to_id_map
^
WARNING: cross-file global variable reference to identifier 'event_name_to_id_map' at /usr/share/systemtap/tapset/qemu-system-arm-simpletrace.stp:3:8 from: identifier 'event_name_to_id_map' at /usr/share/systemtap/tapset/qemu-aarch64-simpletrace.stp:8:21
source: if (!([name] in event_name_to_id_map)) {
^
WARNING: cross-file global variable reference to identifier 'event_next_id' at /usr/share/systemtap/tapset/qemu-system-arm-simpletrace.stp:4:8 from: identifier 'event_next_id' at :9:38
source: event_name_to_id_map[name] = event_next_id
^
We already have a string used to prefix probe names, so just
replace '.' with '_' to get a function / variable name prefix
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170728133657.5525-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With the move of some docs to docs/interop on ac06724a71,
a couple of references were not updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
I expect the 'null' type to be useful mostly for members of alternate
types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Based on a old patch by Laszlo.
Time to get this in ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Message-id: 20170717101632.23247-1-kraxel@redhat.com
The following thread was helpful while writing this script:
https://github.com/coccinelle/coccinelle/issues/86
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170718045540.16322-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
-----BEGIN PGP SIGNATURE-----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=Vt6Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-07-17
# gpg: Signature made Mon 17 Jul 2017 19:46:14 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
qmp: Include parent type on 'qom-list-types' output
qmp: Include 'abstract' field on 'qom-list-types' output
tests: Simplify abstract-interfaces check with a helper
i386: add Skylake-Server cpu model
i386: Update comment about XSAVES on Skylake-Client
i386: expose "TCGTCGTCGTCG" in the 0x40000000 CPUID leaf
fw_cfg: move QOM type defines and fw_cfg types into fw_cfg.h
fw_cfg: move qdev_init_nofail() from fw_cfg_init1() to callers
fw_cfg: switch fw_cfg_find() to locate the fw_cfg device by type rather than path
qom: Fix ambiguous path detection when ambiguous=NULL
Revert "machine: Convert abstract typename on compat_props to subclass names"
test-qdev-global-props: Test global property ordering
qdev: fix the order compat and global properties are applied
tests: Test case for object_resolve_path*()
device-crash-test: Fix regexp on whitelist
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "||" in the whitelist entry was not escaped, making the regexp match
all strings, on every single cases where QEMU aborted.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170614144939.1115-1-ehabkost@redhat.com>
Last patch removed a nesting level in generated code. Re-align all code
generated by backends to be 4-column aligned.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 149915824586.6295.17820926011082409033.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If an event is dynamically disabled, the TCG code that calls the
execution-time tracer is not generated.
Removes the overheads of execution-time tracers for dynamically disabled
events. As a bonus, also avoids checking the event state when the
execution-time tracer is called from TCG-generated code (since otherwise
TCG would simply not call it).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 149915799921.6295.13067154430923434035.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a coccinelle script that can be used to automatically convert
manual sequences of
memory_region_init_ram_nomigrate()
vmstate_register_ram{,_global}()
to use the new
memory_region_init_ram()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-7-git-send-email-peter.maydell@linaro.org
Implement warn_report_err() and warn_reportf_err() functions which
are the same as the error_report_err() and error_reportf_err()
functions except report a warning instead of an error.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <276ff93eadc0b01b8243cc61ffc331f77922c0d0.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add warn_report(), warn_vreport() for reporting warnings, and
info_report(), info_vreport() for informational messages.
These are implemented them with a helper function factored out of
error_vreport(), suitably generalized. This patch makes no changes
to the output of the original error_report() function.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <c89e9980019f296ec9aa38d7689ac4d5c369296d.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The gen_ prefix is awkward. Generated C should go through cgen()
exactly once (see commit 1f9a7a1). The common way to get this wrong is
passing a foo=gen_foo() keyword argument to mcgen(). I'd like us to
adopt a naming convention where gen_ means "something that's been piped
through cgen(), and thus must not be passed to cgen() or mcgen()".
Requires renaming gen_params(), gen_marshal_proto() and
gen_event_send_proto().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170601124143.10915-1-marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The recent commit b097efc0 used qobject_decref(QOBJECT(E)), even
though we already have QDECREF(E) for that purpose. We can update
our coccinelle script to catch any future relapses; with that in
place, the rest of the patch is generated with:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170624181008.25497-3-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This was used to extract .txt documentation for QMP. This was
changed to use the QAPI schema instead, so zap it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using signal to establish a signal handler is not portable; on
SysV systems, the signal handler would be reset to SIG_DFL after
delivery, while BSD preserves the signal handler. Daniel Berrange
reported that (to complicate matters further) the signal system call
has SysV behavior, but glibc signal() actually calls the sigaction
system call to provide BSD behavior.
However, using signal() to set a signal's disposition to SIG_DFL
or SIG_IGN is portable and is a relatively common occurrence in
QEMU source code, so allow that.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before the previous commit, parameter promote_int = true made
visit_start_alternate() with an input visitor avoid QTYPE_QINT
variants and create QTYPE_QFLOAT variants instead. This was used
where QTYPE_QINT variants were invalid.
The previous commit fused QTYPE_QINT with QTYPE_QFLOAT, rendering
promote_int useless and unused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-8-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Today, if we use a trace-event file which does not declare an event
existing in the log file we'll get the following error:
$ scripts/simpletrace.py trace-events trace-68508
Traceback (most recent call last):
File "scripts/simpletrace.py", line 242, in <module>
run(Formatter())
File "scripts/simpletrace.py", line 217, in run
process(events, sys.argv[2], analyzer, read_header=read_header)
File "scripts/simpletrace.py", line 192, in process
for rec in read_trace_records(edict, log):
File "scripts/simpletrace.py", line 107, in read_trace_records
rec = read_record(edict, idtoname, fobj)
File "scripts/simpletrace.py", line 71, in read_record
return get_record(edict, idtoname, rechdr, fobj)
File "scripts/simpletrace.py", line 45, in get_record
event = edict[name]
KeyError: 'qemu_mutex_locked'
This patch improves this error by adding a hint instead of just that
KeyError log:
$ scripts/simpletrace.py trace-events trace-68508
'qemu_mutex_locked' event is logged but is not declared in the trace
events file, try using trace-events-all instead.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1496075404-8845-1-git-send-email-joserz@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test code to check if we can crash QEMU using -device. It will
test all accel/machine/device combinations by default, which may
take a few hours (it's more than 90k test cases). There's a "-r"
option that makes it test a random sample of combinations.
The scripts contains a whitelist for: 1) known error messages
that make QEMU exit cleanly; 2) known QEMU crashes.
This is the behavior when the script finds a failure:
* Known clean (exitcode=1) errors generate DEBUG messages
(hidden by default)
* Unknown clean (exitcode=1) errors will generate INFO messages
(visible by default)
* Known crashes generate error messages, but are not fatal
(unless --strict mode is used)
* Unknown crashes generate fatal error messages
Having an updated whitelist of known clean errors is useful to make the
script less verbose and run faster when in --quick mode, but the
whitelist doesn't need to be always up to date.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170526181200.17227-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Allow the exit code of QEMU to be queried by scripts.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170526181200.17227-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Keep the Popen object around to we can query its exit code later.
To keep the existing 'self._popen is None' checks working, add a
is_running() method, that will check if the process is still running.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170526181200.17227-2-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Alternates are sum types like unions, but use the JSON type on the
wire / QType in QObject instead of an explicit tag. That's why we
require alternate members to have distinct QTypes.
The recently introduced keyval_parse() (commit d454dbe) can only
produce string scalars. The qobject_input_visitor_new_keyval() input
visitor mostly hides the difference, so code using a QObject input
visitor doesn't have to care whether its input was parsed from JSON or
KEY=VALUE,... The difference leaks for alternates, as noted in commit
0ee9ae7: a non-string, non-enum scalar alternate value can't currently
be expressed.
In part, this is just our insufficiently sophisticated implementation.
Consider alternate type 'GuestFileWhence'. It has an integer member
and a 'QGASeek' member. The latter is an enumeration with values
'set', 'cur', 'end'. The meaning of b=set, b=cur, b=end, b=0, b=1 and
so forth is perfectly obvious. However, our current implementation
falls apart at run time for b=0, b=1, and so forth. Fixable, but not
today; add a test case and a TODO comment.
Now consider an alternate type with a string and an integer member.
What's the meaning of a=42? Is it the string "42" or the integer 42?
Whichever meaning you pick makes the other inexpressible. This isn't
just an implementation problem, it's fundamental. Our current
implementation will pick string.
So far, we haven't needed such alternates. To make sure we stop and
think before we add one that cannot sanely work with keyval_parse(),
let's require alternate members to have sufficiently distinct
representation in KEY=VALUE,... syntax:
* A string member clashes with any other scalar member
* An enumeration member clashes with bool members when it has value
'on' or 'off'.
* An enumeration member clashes with numeric members when it has a
value that starts with '-', '+', or a decimal digit. This is a
rather lazy approximation of the actual number syntax accepted by
the visitor.
Note that enumeration values starting with '-' and '+' are rejected
elsewhere already, but better safe than sorry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1495471335-23707-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When invoking the script with -s, we end up passing a bogus value
to QEMU:
$ ./scripts/qmp/qom-set -s /var/tmp/qmp-sock-exp /machine.accel kvm
{}
$ ./scripts/qmp/qom-get -s /var/tmp/qmp-sock-exp /machine.accel
/var/tmp/qmp-sock-exp
This happens because sys.argv[2] isn't necessarily the command line
argument that holds the value. It is sys.argv[4] when -s was also
passed.
Actually, the code already has a variable to handle that. This patch
simply uses it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <149373610338.5144.9635049015143453288.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The default NetBSD package manager is pkgsrc and it installs Perl
along other third party programs under custom and configurable prefix.
The default prefix for binary prebuilt packages is /usr/pkg, and the
Perl executable lands in /usr/pkg/bin/perl.
This change switches "/usr/bin/perl" to "/usr/bin/env perl" as it's
the most portable solution that should work for almost everybody.
Perl's executable is detected automatically.
This change switches -w option passed to the executable with more
modern "use warnings;" approach. There is no functional change to the
default behavior.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Appease pkgsrc and use portable shell variable comparison.
This switches "==" to "=". It should not be a functional change.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use the existing readline history function we are utilizing
to provide persistent command history across instances of qmp-shell.
This assists entering debug commands across sessions that may be
interrupted by QEMU sessions terminating, where the qmp-shell has
to be relaunched.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20170427223628.20893-1-jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than making lots of callers wrap a scalar in a QInt, QString,
or QBool, provide helper macros that do the wrapping automatically.
Update the Coccinelle script to make mass conversions easy, although
the conversion itself will be done as a separate patches to ease
review and backport efforts.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-6-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
The script is separate from the cleanups, for ease of review and
backporting. A later patch will then add further possible cleanups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-4-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
but it'll come in the next pull request.
* use GDB XML register description for x86
* use _Static_assert in QEMU_BUILD_BUG_ON
* add "R:" to MAINTAINERS and get_maintainers
* checkpatch improvements
* dump threading fixes
* first part of vhost-user-scsi support
* QemuMutex tracing
* vmw_pvscsi and megasas fixes
* sgabios module update
* use Rev3 (ACPI 2.0) FADT
* deprecate -hdachs
* improve -accel documentation
* hax fix
* qemu-char GSource bugfix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJZDE+gAAoJEL/70l94x66DIpYH/1IOz3u8ObD8D4Lor07LkCCZ
vWFnTBMgGi9gTL5JQDnukRR3cmNp9EVOtAP5Yf+v+/Xqyq/FNGnoVWxCxEby7LtN
zrIXbsKMCaEcGzRNJFcbKV+KZnzkJrz92J0NHy29ruCK1AsslOXAWf4Qb1MV+fQl
6w2Upsh35usvWCNpFm2o8arzMEmNuE2xJDPKUB11GMrZT6TExq4Zqa8Zj1Ihc0sX
XcDr+eeBmb65Vv3jQLntOhSWAy0Xxf/fDXYTQx+JLHFgvpSOIWMiS+fqIVXtT0bH
0E4hQrBr0qjes8n8+9WGGQW2k8Ak0QlDvrZnQ97hTeV1k6SxW+2ATO2mLeJp9TM=
=5hf2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'bonzini/tags/for-upstream' into staging
A large set of small patches. I have not included yet vhost-user-scsi,
but it'll come in the next pull request.
* use GDB XML register description for x86
* use _Static_assert in QEMU_BUILD_BUG_ON
* add "R:" to MAINTAINERS and get_maintainers
* checkpatch improvements
* dump threading fixes
* first part of vhost-user-scsi support
* QemuMutex tracing
* vmw_pvscsi and megasas fixes
* sgabios module update
* use Rev3 (ACPI 2.0) FADT
* deprecate -hdachs
* improve -accel documentation
* hax fix
* qemu-char GSource bugfix
# gpg: Signature made Fri 05 May 2017 06:10:40 AM EDT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* bonzini/tags/for-upstream: (21 commits)
vhost-scsi: create a vhost-scsi-common abstraction
libvhost-user: replace vasprintf() to fix build
get_maintainer: add subsystem to reviewer output
get_maintainer: --r (list reviewer) is on by default
get_maintainer: it's '--pattern-depth', not '-pattern-depth'
get_maintainer: Teach get_maintainer.pl about the new "R:" tag
MAINTAINERS: Add "R:" tag for self-appointed reviewers
Fix the -accel parameter and the documentation for 'hax'
dump: Acquire BQL around vm_start() in dump thread
hax: Fix memory mapping de-duplication logic
checkpatch: Disallow glib asserts in main code
trace: add qemu mutex lock and unlock trace events
vmw_pvscsi: check message ring page count at initialisation
sgabios: update for "fix wrong video attrs for int 10h,ah==13h"
scsi: avoid an off-by-one error in megasas_mmio_write
vl: deprecate the "-hdachs" option
use _Static_assert in QEMU_BUILD_BUG_ON
target/i386: Add GDB XML register description support
char: Fix removing wrong GSource that be found by fd_in_tag
hw/i386: Build-time assertion on pc/q35 reset register being identical.
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The UST trace backend can only cope with upto 10 arguments. To ensure we
don't exceed the limit when UST is not compiled in, disallow more than
10 arguments upfront.
This prevents the case where:
commit 0fc8aec7de
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Apr 18 10:20:20 2017 +0800
COLO-compare: Optimize tcp compare trace event
Optimize two trace events as one, adjust print format make
it easy to read. rename trace_colo_compare_pkt_info_src/dst
to trace_colo_compare_tcp_info.
regressed the fix done in
commit 2dfe5113b1
Author: Alex Bennée <alex.bennee@linaro.org>
Date: Fri Oct 28 14:25:59 2016 +0100
net: split colo_compare_pkt_info into two trace events
It seems there is a limit to the number of arguments a UST trace event
can take and at 11 the previous trace command broke the build. Split the
trace into a src pkt and dst pkt trace to fix this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20161028132559.8324-1-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we get an immediate fail even when UST is disabled:
GEN net/trace.h
Traceback (most recent call last):
File "/home/berrange/src/virt/qemu/scripts/tracetool.py", line 154, in <module>
main(sys.argv)
File "/home/berrange/src/virt/qemu/scripts/tracetool.py", line 145, in main
events.extend(tracetool.read_events(fh))
File "/home/berrange/src/virt/qemu/scripts/tracetool/__init__.py", line 307, in read_events
event = Event.build(line)
File "/home/berrange/src/virt/qemu/scripts/tracetool/__init__.py", line 244, in build
event = Event(name, props, fmt, args)
File "/home/berrange/src/virt/qemu/scripts/tracetool/__init__.py", line 196, in __init__
"argument count" % name)
ValueError: Event 'colo_compare_tcp_info' has more than maximum permitted argument count
Makefile:96: recipe for target 'net/trace.h-timestamp' failed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170426153900.21066-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewer output currently does not include the subsystem
that matched. Add it.
Miscellanea:
o Add a get_subsystem_name routine to centralize this
Cherry picked from Linux commit 2a7cb1dc82fc2a52e747b4c496c13f6575fb1790.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't consistenly document the default value next to the option
listing, but we do have a list of defaults here, so let's keep it up to
date.
Cherry picked from Linux commit 4f07510df2e8c47fd65b8ffaaf6c5d334d59d598.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Though it appears that Perl's GetOptions will take either, the latter is
not documented in the options listing.
Cherry picked from Linux commit cc7ff0ef6eca3deeea4a424ca47a67c8450d5424.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can now designate reviewers in the MAINTAINERS file with the new
"R:" tag, so this commit teaches get_maintainers.pl to add their
email addresses.
Cherry picked from Linux commit c1c3f2c906e35bcb6e4cdf5b8e077660fead14fe,
with fixes to avoid \C as in QEMU commit ba10f729f1 ("get_maintainer.pl:
\C is deprecated", 2015-09-25).
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Glib commit a6a875068779 (from 2013) made many of the glib assert
macros non-fatal if a flag is set.
This causes two problems:
a) Compilers moan that your code is unsafe even though you've
put an assert in before the point of use.
b) Someone evil could, in a library, call
g_test_set_nonfatal_assertions() and cause our assertions in
important places not to fail and potentially allow memory overruns.
Ban most of the glib assertion functions (basically everything except
g_assert and g_assert_not_reached) except in tests/
This makes checkpatch gives an error such as:
ERROR: Use g_assert or g_assert_not_reached
#77: FILE: vl.c:4725:
+ g_assert_cmpstr("Chocolate", >, "Cheese");
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170427165526.19836-1-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Users can inherit from the simpletrace.Analyzer class and receive
callbacks when events of interest occur in a trace file. The method
signature is a little magic because the timestamp and pid arguments are
optional. Document this.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20170411095654.18383-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since QEMU has been able to build with native Int128 support this was
broken as it attempts to fish values out of the non-existent
structure. Also the alias print was trying to make a %x out of
gdb.ValueType directly which didn't seem to work.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Commit 0ab8ed18a6 ("trace: switch to
modular code generation for sub-directories") forgot to convert "tcg"
trace events to the modular code generation approach where each
sub-directory has its own trace-events file.
This patch fixes compilation for "tcg" trace events. Currently they are
only used in the root ./trace-events file.
"tcg" trace events can only be used in the root ./trace-events file for
the time being.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170327131718.18268-1-stefanha@redhat.com
Suggested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Messed up in commit bc52d03.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1490015515-25851-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When choking on a token where an expression is expected, we report
'Expected "{", "[" or string'. Close, but no cigar. Fix it to
Expected '"{", "[", string, boolean or "null"'.
Missed in commit e53188a.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-48-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-47-git-send-email-armbru@redhat.com>
