linux-headers: update

Update against Linux v4.12-rc1.

Also include the new vfio_ccw.h header.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This commit is contained in:
Cornelia Huck 2017-05-18 13:47:27 +02:00
parent f881bbdf72
commit 74c98e20a6
20 changed files with 151 additions and 16 deletions

View File

@ -124,7 +124,7 @@
* Recommend using hypercall for address space switches rather
* than MOV to CR3 instruction
*/
#define HV_X64_MWAIT_RECOMMENDED (1 << 0)
#define HV_X64_AS_SWITCH_RECOMMENDED (1 << 0)
/* Recommend using hypercall for local TLB flushes rather
* than INVLPG or MOV to CR3 instructions */
#define HV_X64_LOCAL_TLB_FLUSH_RECOMMENDED (1 << 1)
@ -147,6 +147,11 @@
*/
#define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5)
/*
* Virtual APIC support
*/
#define HV_X64_DEPRECATING_AEOI_RECOMMENDED (1 << 9)
/*
* Crash notification flag.
*/

View File

@ -641,6 +641,7 @@
* e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.)
*/
#define KEY_DATA 0x277
#define KEY_ONSCREEN_KEYBOARD 0x278
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0

View File

@ -58,9 +58,14 @@ struct input_id {
* Note that input core does not clamp reported values to the
* [minimum, maximum] limits, such task is left to userspace.
*
* Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
* units per millimeter (units/mm), resolution for rotational axes
* (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
* The default resolution for main axes (ABS_X, ABS_Y, ABS_Z)
* is reported in units per millimeter (units/mm), resolution
* for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported
* in units per radian.
* When INPUT_PROP_ACCELEROMETER is set the resolution changes.
* The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in
* in units per g (units/g) and in units per degree per second
* (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ).
*/
struct input_absinfo {
int32_t value;

View File

@ -114,7 +114,7 @@
#define PCI_SUBSYSTEM_ID 0x2e
#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
#define PCI_ROM_ADDRESS_ENABLE 0x01
#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
#define PCI_ROM_ADDRESS_MASK (~0x7ffU)
#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
@ -630,6 +630,7 @@
#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */
#define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */
#define PCI_EXP_DEVCTL2_ATOMIC_REQ 0x0040 /* Set Atomic requests */
#define PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK 0x0080 /* Block atomic egress */
#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */
#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */
#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */

View File

@ -27,6 +27,8 @@
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_READONLY_MEM
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_REG_SIZE(id) \
(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
@ -114,6 +116,8 @@ struct kvm_debug_exit_arch {
};
struct kvm_sync_regs {
/* Used with KVM_CAP_ARM_USER_IRQ */
__u64 device_irq_level;
};
struct kvm_arch_memory_slot {
@ -192,13 +196,17 @@ struct kvm_arch_memory_slot {
#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5
#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6
#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7
#define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \
(0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT)
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff
#define VGIC_LEVEL_INFO_LINE_LEVEL 0
#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
#define KVM_DEV_ARM_ITS_SAVE_TABLES 1
#define KVM_DEV_ARM_ITS_RESTORE_TABLES 2
#define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3
/* KVM_IRQ_LINE irq field index values */
#define KVM_ARM_IRQ_TYPE_SHIFT 24

View File

@ -353,5 +353,6 @@
#define __NR_pkey_mprotect (__NR_SYSCALL_BASE + 394)
#define __NR_pkey_alloc (__NR_SYSCALL_BASE + 395)
#define __NR_pkey_free (__NR_SYSCALL_BASE + 396)
#define __NR_statx (__NR_SYSCALL_BASE + 397)
#endif /* _ASM_ARM_UNISTD_COMMON_H */

View File

@ -39,6 +39,8 @@
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_READONLY_MEM
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_REG_SIZE(id) \
(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
@ -143,6 +145,8 @@ struct kvm_debug_exit_arch {
#define KVM_GUESTDBG_USE_HW (1 << 17)
struct kvm_sync_regs {
/* Used with KVM_CAP_ARM_USER_IRQ */
__u64 device_irq_level;
};
struct kvm_arch_memory_slot {
@ -212,13 +216,17 @@ struct kvm_arch_memory_slot {
#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5
#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6
#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7
#define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \
(0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT)
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff
#define VGIC_LEVEL_INFO_LINE_LEVEL 0
#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
#define KVM_DEV_ARM_ITS_SAVE_TABLES 1
#define KVM_DEV_ARM_ITS_RESTORE_TABLES 2
#define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3
/* Device Control API on vcpu fd */
#define KVM_ARM_VCPU_PMU_V3_CTRL 0

View File

@ -29,6 +29,9 @@
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_GUEST_DEBUG
/* Not always available, but if it is, this is the correct offset. */
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
struct kvm_regs {
__u64 pc;
__u64 cr;

View File

@ -393,5 +393,6 @@
#define __NR_preadv2 380
#define __NR_pwritev2 381
#define __NR_kexec_file_load 382
#define __NR_statx 383
#endif /* _ASM_POWERPC_UNISTD_H_ */

View File

@ -26,6 +26,8 @@
#define KVM_DEV_FLIC_ADAPTER_REGISTER 6
#define KVM_DEV_FLIC_ADAPTER_MODIFY 7
#define KVM_DEV_FLIC_CLEAR_IO_IRQ 8
#define KVM_DEV_FLIC_AISM 9
#define KVM_DEV_FLIC_AIRQ_INJECT 10
/*
* We can have up to 4*64k pending subchannels + 8 adapter interrupts,
* as well as up to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts.
@ -41,7 +43,14 @@ struct kvm_s390_io_adapter {
__u8 isc;
__u8 maskable;
__u8 swap;
__u8 pad;
__u8 flags;
};
#define KVM_S390_ADAPTER_SUPPRESSIBLE 0x01
struct kvm_s390_ais_req {
__u8 isc;
__u16 mode;
};
#define KVM_S390_IO_ADAPTER_MASK 1
@ -110,6 +119,7 @@ struct kvm_s390_vm_cpu_machine {
#define KVM_S390_VM_CPU_FEAT_CMMA 10
#define KVM_S390_VM_CPU_FEAT_PFMFI 11
#define KVM_S390_VM_CPU_FEAT_SIGPIF 12
#define KVM_S390_VM_CPU_FEAT_KSS 13
struct kvm_s390_vm_cpu_feat {
__u64 feat[16];
};
@ -131,7 +141,8 @@ struct kvm_s390_vm_cpu_subfunc {
__u8 kmo[16]; /* with MSA4 */
__u8 pcc[16]; /* with MSA4 */
__u8 ppno[16]; /* with MSA5 */
__u8 reserved[1824];
__u8 kma[16]; /* with MSA8 */
__u8 reserved[1808];
};
/* kvm attributes for crypto */
@ -197,6 +208,10 @@ struct kvm_guest_debug_arch {
#define KVM_SYNC_VRS (1UL << 6)
#define KVM_SYNC_RICCB (1UL << 7)
#define KVM_SYNC_FPRS (1UL << 8)
#define KVM_SYNC_GSCB (1UL << 9)
/* length and alignment of the sdnx as a power of two */
#define SDNXC 8
#define SDNXL (1UL << SDNXC)
/* definition of registers in kvm_run */
struct kvm_sync_regs {
__u64 prefix; /* prefix register */
@ -217,8 +232,16 @@ struct kvm_sync_regs {
};
__u8 reserved[512]; /* for future vector expansion */
__u32 fpc; /* valid on KVM_SYNC_VRS or KVM_SYNC_FPRS */
__u8 padding[52]; /* riccb needs to be 64byte aligned */
__u8 padding1[52]; /* riccb needs to be 64byte aligned */
__u8 riccb[64]; /* runtime instrumentation controls block */
__u8 padding2[192]; /* sdnx needs to be 256byte aligned */
union {
__u8 sdnx[SDNXL]; /* state description annex */
struct {
__u64 reserved1[2];
__u64 gscb[4];
};
};
};
#define KVM_REG_S390_TODPR (KVM_REG_S390 | KVM_REG_SIZE_U32 | 0x1)

View File

@ -313,7 +313,9 @@
#define __NR_copy_file_range 375
#define __NR_preadv2 376
#define __NR_pwritev2 377
#define NR_syscalls 378
#define __NR_s390_guarded_storage 378
#define __NR_statx 379
#define NR_syscalls 380
/*
* There are some system calls that are not present on 64 bit, some

View File

@ -9,6 +9,9 @@
#include <linux/types.h>
#include <linux/ioctl.h>
#define KVM_PIO_PAGE_OFFSET 1
#define KVM_COALESCED_MMIO_PAGE_OFFSET 2
#define DE_VECTOR 0
#define DB_VECTOR 1
#define BP_VECTOR 3

View File

@ -380,5 +380,7 @@
#define __NR_pkey_mprotect 380
#define __NR_pkey_alloc 381
#define __NR_pkey_free 382
#define __NR_statx 383
#define __NR_arch_prctl 384
#endif /* _ASM_X86_UNISTD_32_H */

View File

@ -333,5 +333,6 @@
#define __NR_pkey_mprotect 329
#define __NR_pkey_alloc 330
#define __NR_pkey_free 331
#define __NR_statx 332
#endif /* _ASM_X86_UNISTD_64_H */

View File

@ -286,6 +286,7 @@
#define __NR_pkey_mprotect (__X32_SYSCALL_BIT + 329)
#define __NR_pkey_alloc (__X32_SYSCALL_BIT + 330)
#define __NR_pkey_free (__X32_SYSCALL_BIT + 331)
#define __NR_statx (__X32_SYSCALL_BIT + 332)
#define __NR_rt_sigaction (__X32_SYSCALL_BIT + 512)
#define __NR_rt_sigreturn (__X32_SYSCALL_BIT + 513)
#define __NR_ioctl (__X32_SYSCALL_BIT + 514)

View File

@ -702,6 +702,10 @@ struct kvm_ppc_resize_hpt {
#define KVM_VM_PPC_HV 1
#define KVM_VM_PPC_PR 2
/* on MIPS, 0 forces trap & emulate, 1 forces VZ ASE */
#define KVM_VM_MIPS_TE 0
#define KVM_VM_MIPS_VZ 1
#define KVM_S390_SIE_PAGE_OFFSET 1
/*
@ -883,6 +887,14 @@ struct kvm_ppc_resize_hpt {
#define KVM_CAP_PPC_MMU_RADIX 134
#define KVM_CAP_PPC_MMU_HASH_V3 135
#define KVM_CAP_IMMEDIATE_EXIT 136
#define KVM_CAP_MIPS_VZ 137
#define KVM_CAP_MIPS_TE 138
#define KVM_CAP_MIPS_64BIT 139
#define KVM_CAP_S390_GS 140
#define KVM_CAP_S390_AIS 141
#define KVM_CAP_SPAPR_TCE_VFIO 142
#define KVM_CAP_X86_GUEST_MWAIT 143
#define KVM_CAP_ARM_USER_IRQ 144
#ifdef KVM_CAP_IRQ_ROUTING
@ -1087,6 +1099,7 @@ struct kvm_device_attr {
#define KVM_DEV_VFIO_GROUP 1
#define KVM_DEV_VFIO_GROUP_ADD 1
#define KVM_DEV_VFIO_GROUP_DEL 2
#define KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE 3
enum kvm_device_type {
KVM_DEV_TYPE_FSL_MPIC_20 = 1,
@ -1108,6 +1121,11 @@ enum kvm_device_type {
KVM_DEV_TYPE_MAX,
};
struct kvm_vfio_spapr_tce {
__s32 groupfd;
__s32 tablefd;
};
/*
* ioctls for VM fds
*/
@ -1354,4 +1372,11 @@ struct kvm_assigned_msix_entry {
#define KVM_X2APIC_API_USE_32BIT_IDS (1ULL << 0)
#define KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK (1ULL << 1)
/* Available with KVM_CAP_ARM_USER_IRQ */
/* Bits for run->s.regs.device_irq_level */
#define KVM_ARM_DEV_EL1_VTIMER (1 << 0)
#define KVM_ARM_DEV_EL1_PTIMER (1 << 1)
#define KVM_ARM_DEV_PMU (1 << 2)
#endif /* __LINUX_KVM_H */

View File

@ -20,7 +20,8 @@
#define UFFD_API ((__u64)0xAA)
#define UFFD_API_FEATURES (UFFD_FEATURE_EVENT_FORK | \
UFFD_FEATURE_EVENT_REMAP | \
UFFD_FEATURE_EVENT_MADVDONTNEED | \
UFFD_FEATURE_EVENT_REMOVE | \
UFFD_FEATURE_EVENT_UNMAP | \
UFFD_FEATURE_MISSING_HUGETLBFS | \
UFFD_FEATURE_MISSING_SHMEM)
#define UFFD_API_IOCTLS \
@ -92,7 +93,7 @@ struct uffd_msg {
struct {
__u64 start;
__u64 end;
} madv_dn;
} remove;
struct {
/* unused reserved fields */
@ -109,7 +110,8 @@ struct uffd_msg {
#define UFFD_EVENT_PAGEFAULT 0x12
#define UFFD_EVENT_FORK 0x13
#define UFFD_EVENT_REMAP 0x14
#define UFFD_EVENT_MADVDONTNEED 0x15
#define UFFD_EVENT_REMOVE 0x15
#define UFFD_EVENT_UNMAP 0x16
/* flags for UFFD_EVENT_PAGEFAULT */
#define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */
@ -155,9 +157,10 @@ struct uffdio_api {
#define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0)
#define UFFD_FEATURE_EVENT_FORK (1<<1)
#define UFFD_FEATURE_EVENT_REMAP (1<<2)
#define UFFD_FEATURE_EVENT_MADVDONTNEED (1<<3)
#define UFFD_FEATURE_EVENT_REMOVE (1<<3)
#define UFFD_FEATURE_MISSING_HUGETLBFS (1<<4)
#define UFFD_FEATURE_MISSING_SHMEM (1<<5)
#define UFFD_FEATURE_EVENT_UNMAP (1<<6)
__u64 features;
__u64 ioctls;

View File

@ -198,6 +198,7 @@ struct vfio_device_info {
#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */
#define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */
#define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */
#define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */
__u32 num_regions; /* Max region index + 1 */
__u32 num_irqs; /* Max IRQ index + 1 */
};
@ -212,6 +213,7 @@ struct vfio_device_info {
#define VFIO_DEVICE_API_PCI_STRING "vfio-pci"
#define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform"
#define VFIO_DEVICE_API_AMBA_STRING "vfio-amba"
#define VFIO_DEVICE_API_CCW_STRING "vfio-ccw"
/**
* VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
@ -446,6 +448,22 @@ enum {
VFIO_PCI_NUM_IRQS
};
/*
* The vfio-ccw bus driver makes use of the following fixed region and
* IRQ index mapping. Unimplemented regions return a size of zero.
* Unimplemented IRQ types return a count of zero.
*/
enum {
VFIO_CCW_CONFIG_REGION_INDEX,
VFIO_CCW_NUM_REGIONS
};
enum {
VFIO_CCW_IO_IRQ_INDEX,
VFIO_CCW_NUM_IRQS
};
/**
* VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12,
* struct vfio_pci_hot_reset_info)

View File

@ -0,0 +1,24 @@
/*
* Interfaces for vfio-ccw
*
* Copyright IBM Corp. 2017
*
* Author(s): Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
*/
#ifndef _VFIO_CCW_H_
#define _VFIO_CCW_H_
#include <linux/types.h>
struct ccw_io_region {
#define ORB_AREA_SIZE 12
__u8 orb_area[ORB_AREA_SIZE];
#define SCSW_AREA_SIZE 12
__u8 scsw_area[SCSW_AREA_SIZE];
#define IRB_AREA_SIZE 96
__u8 irb_area[IRB_AREA_SIZE];
__u32 ret_code;
} __attribute__((packed));
#endif

View File

@ -113,7 +113,7 @@ done
rm -rf "$output/linux-headers/linux"
mkdir -p "$output/linux-headers/linux"
for header in kvm.h kvm_para.h vfio.h vhost.h \
for header in kvm.h kvm_para.h vfio.h vfio_ccw.h vhost.h \
psci.h userfaultfd.h; do
cp "$tmpdir/include/linux/$header" "$output/linux-headers/linux"
done