These inline helpers are all used by target specific code so move them
out of the general header so we don't needlessly pollute the rest of
the API with target specific stuff.
Note we have to include cpu.h in semihosting as it was relying on a
side effect before.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>
Use tcg_constant_i64. Adjust in2_mri2_* to allocate a new
temporary for the output, using gen_ri2 for the address.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_flags() as it is today uses probe_access_full(), which in
turn uses probe_access_internal() with size = 0. probe_access_internal()
then uses the size to call the tlb_fill() callback for the given CPU.
This size param ('fault_size' as probe_access_internal() calls it) is
ignored by most existing .tlb_fill callback implementations, e.g.
arm_cpu_tlb_fill(), ppc_cpu_tlb_fill(), x86_cpu_tlb_fill() and
mips_cpu_tlb_fill() to name a few.
But RISC-V riscv_cpu_tlb_fill() actually uses it. The 'size' parameter
is used to check for PMP (Physical Memory Protection) access. This is
necessary because PMP does not make any guarantees about all the bytes
of the same page having the same permissions, i.e. the same page can
have different PMP properties, so we're forced to make sub-page range
checks. To allow RISC-V emulation to do a probe_acess_flags() that
covers PMP, we need to either add a 'size' param to the existing
probe_acess_flags() or create a new interface (e.g.
probe_access_range_flags).
There are quite a few probe_* APIs already, so let's add a 'size' param
to probe_access_flags() and re-use this API. This is done by open coding
what probe_access_full() does inside probe_acess_flags() and passing the
'size' param to probe_acess_internal(). Existing probe_access_flags()
callers use size = 0 to not change their current API usage. 'size' is
asserted to enforce single page access like probe_access() already does.
No behavioral changes intended.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230223234427.521114-2-dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In most cases, this is a simple local allocate and free
replaced by tcg_constant_*. In three cases, a variable
temp was initialized with a constant value -- reorg to
localize the constant. In gen_acc, this fixes a leak.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230220184052.163465-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Return a constant or NULL, which means the free may be
removed from all callers of fpinst_extract_m34.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230220184052.163465-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The a and b fields are not modified by the consumer,
and while we need not free a constant, tcg will quietly
ignore such frees, so free_compare need not be changed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230220184052.163465-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace tcg_const_* with tcg_constant_* in contexts
where the free to remove is nearby.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20230220184052.163465-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ensure that the total length is in a local variable
across the byte loop. Compute size1 difference once.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-8-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Inline into the parent functions with a simple test
to select the page, and a new define to remove ifdefs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-7-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When this code was written, it was using tlb_vaddr_to_host,
which does not handle TLB_DIRTY. Since then, it has been
converted to probe_access_flags, which does.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-6-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Assign to access struct immediately, rather than waiting
until the end of the function. This means we can pass
address of haddr struct members instead of allocating
extra space on the local stack.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The interface from probe_access_flags is void*, and matching
that will be helpful. We already rely on the gcc extension
for byte arithmetic on void*.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Passing a pointer from the caller down to access_prepare_nf
eliminates a structure copy.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In db9aab5783 we broke the contract of s390_probe_access, in that it
no longer returned an exception code, nor set __excp_addr. Fix both.
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are not on a hot path here, so there is no real need for the logic
here with the split heap and stack space allocation. Simplify it by
always allocating memory from the heap.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215085703.746788-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"note_size" can be smaller than sizeof(note), so unconditionally calling
memset(notep, 0, sizeof(note)) could cause a memory corruption here in
case notep has been allocated dynamically, thus let's use note_size as
length argument for memset() instead.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Fixes: 113d8f4e95 ("s390x: pv: Add dump support")
Message-Id: <20230214141056.680969-1-thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This case is trivial to implement inline.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make a copy of wout_x1 before modifying it, as wout_x1_P
emphasizing that it operates on the out/out2 pair. The insns
that use x1_P are data movement that will not change to Int128.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pack the quotient and remainder into a single Int128.
Use the divu128 primitive to remove the cpu_abort on
32-bit hosts.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Extended div test case to cover these insns.
Pack the quotient and remainder into a single uint64_t.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Fix operand ordering; use tcg_extr32_i64.
In user emulation, threads -- implemented as CPU -- are
created/destroyed, but never reset. There is no point in
allowing the user emulation access the sysemu/reset API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221220145625.26392-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-6-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Protected Virtualization is irrelevant in user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-4-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "MOVE TO PRIMARY/SECONDARY" instructions can also be called
from problem state. We just should properly check whether the
secondary-space access key is valid here, too, and inject a
privileged program exception if it is invalid.
Message-Id: <20221205125852.81848-1-thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The PSW key mask is a 16 bit field, and the psw_key variable is
in the range from 0 to 15, so it does not make sense to use
"0x80 >> psw_key" for testing the bits here. We should use 0x8000
instead.
Message-Id: <20221205142043.95185-1-thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/machine*.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-16-armbru@redhat.com>
The SET ADDRESS SPACE CONTROL FAST instruction is not privileged, it can be
used from problem space, too. Just the switching to the home address space
is privileged and should still generate a privilege exception. This bug is
e.g. causing programs like Java that use the "getcpu" vdso kernel function
to crash (see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990417#26 ).
While we're at it, also check if DAT is not enabled. In that case the
instruction is supposed to generate a special operation exception.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/655
Message-Id: <20221201184443.136355-1-thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix typos (discovered with the 'codespell' utility).
Note: Though "migrateable" still seems to be a valid spelling, we change
it to "migratable" since this is the way more common spelling here.
Message-Id: <20221111182828.282251-1-thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We use the .h.inc extension to include C headers. To be consistent
with the rest of the codebase, rename the C headers using the .def
extension.
IDE/tools using our .editorconfig / .gitattributes will leverage
this consistency.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221025235006.7215-3-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
=6hXE
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu into staging
testing and plugin updates for 7.2:
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
# KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
# 814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
# dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
# KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
# PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
# 76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
# =6hXE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Nov 2022 09:49:39 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu: (31 commits)
tests/vm: use -o IdentitiesOnly=yes for ssh
tests/unit: cleanups for test-io-channel-command
contrib/plugins: protect execlog's last_exec expansion
contrib/plugins: enable debug on CONFIG_DEBUG_TCG
tests/tcg: include CONFIG_PLUGIN in config-host.mak
target/s390x: fake instruction loading when handling 'ex'
target/s390x: don't probe next pc for EXecuted insns
target/s390x: don't use ld_code2 to probe next pc
tests/tcg: re-enable threadcount for sh4
tests/tcg: re-enable linux-test for sh4
tests/avocado: disable sh4 rd2 tests on Gitlab
tests/avocado: raspi2_initrd: Wait for guest shutdown message before stopping
tests/avocado: set -machine none for userfwd and vnc tests
MAINTAINERS: fix-up for check-tcg Makefile changes
MAINTAINERS: add features_to_c.sh to gdbstub files
MAINTAINERS: add entries for the key build bits
hw/usb: dev-mtp: Use g_mkdir()
block/vvfat: Unify the mkdir() call
tcg: Avoid using hardcoded /tmp
semihosting/arm-compat-semi: Avoid using hardcoded /tmp
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The value passed is always true, and if the target's
synchronize_from_tb hook is non-trivial, not exiting
may be erroneous.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The s390x EXecute instruction is a bit weird as we synthesis the
executed instruction from what we have stored in memory. This missed
the plugin instrumentation.
Work around this with a special helper to inform the rest of the
translator about the instruction so things stay consistent.
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221027183637.2772968-26-alex.bennee@linaro.org>
We have finished the TB anyway so we can shortcut the other tests by
checking dc->ex_value first.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-25-alex.bennee@linaro.org>
This isn't an translator picking up an instruction so we shouldn't use
the translator_lduw function which has side effects for plugins.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-24-alex.bennee@linaro.org>
The element size is encoded in the M3 field, not in the M4
field.
Fixes: be6324c6b7 ("s390x/tcg: Implement VECTOR ISOLATE STRING")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1248
Message-Id: <20221012182755.1014853-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Sometimes dumping a guest from the outside is the only way to get the
data that is needed. This can be the case if a dumping mechanism like
KDUMP hasn't been configured or data needs to be fetched at a specific
point. Dumping a protected guest from the outside without help from
fw/hw doesn't yield sufficient data to be useful. Hence we now
introduce PV dump support.
The PV dump support works by integrating the firmware into the dump
process. New Ultravisor calls are used to initiate the dump process,
dump cpu data, dump memory state and lastly complete the dump process.
The UV calls are exposed by KVM via the new KVM_PV_DUMP command and
its subcommands. The guest's data is fully encrypted and can only be
decrypted by the entity that owns the customer communication key for
the dumped guest. Also dumping needs to be allowed via a flag in the
SE header.
On the QEMU side of things we store the PV dump data in the newly
introduced architecture ELF sections (storage state and completion
data) and the cpu notes (for cpu dump data).
Users can use the zgetdump tool to convert the encrypted QEMU dump to an
unencrypted one.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Message-Id: <20221017083822.43118-11-frankja@linux.ibm.com>
These memory allocation functions return void *, and casting to
another pointer type is useless clutter. Drop these casts.
If you really want another pointer type, consider g_new().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220923120025.448759-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Several hypervisor capabilities in KVM are target-specific. When exposed
to QEMU users as accelerator properties (i.e. -accel kvm,prop=value), they
should not be available for all targets.
Add a hook for targets to add their own properties to -accel kvm, for
now no such property is defined.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220929072014.20705-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's always better to convey the type of a pointer if at all
possible. So let's add the DumpState typedef to typedefs.h and move
the dump note functions from the opaque pointers to DumpState
pointers.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Cédric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
CC: Palmer Dabbelt <palmer@dabbelt.com>
CC: Alistair Francis <alistair.francis@wdc.com>
CC: Bin Meng <bin.meng@windriver.com>
CC: Cornelia Huck <cohuck@redhat.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Richard Henderson <richard.henderson@linaro.org>
CC: David Hildenbrand <david@redhat.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220811121111.9878-2-frankja@linux.ibm.com>
When PAGE_WRITE_INV is set when calling tlb_set_page,
we immediately set TLB_INVALID_MASK in order to force
tlb_fill to be called on the next lookup. Here in
probe_access_internal, we have just called tlb_fill
and eliminated true misses, thus the lookup must be valid.
This allows us to remove a warning comment from s390x.
There doesn't seem to be a reason to change the code though.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the ZPCI_OP ioctl reports that is is available and usable, then the
underlying KVM host will enable load/store intepretation for any guest
device without a SHM bit in the guest function handle. For a device that
will be using interpretation support, ensure the guest function handle
matches the host function handle; this value is re-checked every time the
guest issues a SET PCI FN to enable the guest device as it is the only
opportunity to reflect function handle changes.
By default, unless interpret=off is specified, interpretation support will
always be assumed and exploited if the necessary ioctl and features are
available on the host kernel. When these are unavailable, we will silently
revert to the interception model; this allows existing guest configurations
to work unmodified on hosts with and without zPCI interpretation support,
allowing QEMU to choose the best support model available.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220902172737.170349-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order for hosts running inside of TCG to initialize the kernel's
random number generator, we should support the PRNO_TRNG instruction,
backed in the usual way with the qemu_guest_getrandom helper. This is
confirmed working on Linux 5.19.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220921100729.2942008-2-Jason@zx2c4.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[thuth: turn prno-trng off in avocado test to avoid breaking it]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to fully support MSA_EXT_5, we have to support the SHA-512
special instructions. So implement those.
The implementation began as something TweetNacl-like, and then was
adjusted to be useful here. It's not very beautiful, but it is quite
short and compact, which is what we're going for.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ restructure, add missing exception, add comments, fixup CPU model ]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220922153820.221811-1-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Right now translator stops right *after* the end of a page, which
breaks reporting of fault locations when the last instruction of a
multi-insn translation block crosses a page boundary.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220817150506.592862-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I2 is 16 bits, not 32.
Found by running valgrind's none/tests/s390x/traps.
Fixes: 1c26875182 ("target-s390: Implement COMPARE AND TRAP")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220817161529.597414-1-iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add stfle 197 (processor-activity-instrumentation extension 1) to the
gen16 default model and fence it off for 7.1 and older.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220727135120.12784-1-borntraeger@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the user queries CPU models via QMP there is a 'deprecated' flag
present, however, this is not done for the CLI '-cpu help' command.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
vfmin_res() / vfmax_res() are trying to check whether a and b are both
zeroes, but in reality they check that they are the same kind of zero.
This causes incorrect results when comparing positive and negative
zeroes.
Fixes: da4807527f ("s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)")
Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220713182612.3780050-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When EXECUTE sets ex_value to interrupt the constructed instruction,
we implicitly disable interrupts so that the value is not corrupted.
Exit to the main loop after execution, so that we re-evaluate any
pending interrupts.
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace this with a flag: exit_to_mainloop.
We can now control the exit for each of DISAS_TOO_MANY,
DISAS_PC_UPDATED, and DISAS_PC_CC_UPDATED, and fold in
the check for PER.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing to distinguish this from DISAS_TOO_MANY.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing to distinguish this from DISAS_NORETURN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to the architecture, SET PREFIX must try to access the new
prefix area and recognize an addressing exception if the area is not
accessible.
For qemu this check prevents a crash in cpu_map_lowcore after an
inaccessible prefix area has been set.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220630094340.3646279-1-scgl@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
Storage key controlled protection is currently not honored when
emulating instructions.
If available, enable key protection for the MEM_OP ioctl, thereby
enabling it for the s390_cpu_virt_mem_* functions, when using kvm.
As a result, the emulation of the following instructions honors storage
keys:
* CLP
The Synch I/O CLP command would need special handling in order
to support storage keys, but is currently not supported.
* CHSC
Performing commands asynchronously would require special
handling, but commands are currently always synchronous.
* STSI
* TSCH
Must (and does) not change channel if terminated due to
protection.
* MSCH
Suppressed on protection, works because fetching instruction.
* SSCH
Suppressed on protection, works because fetching instruction.
* STSCH
* STCRW
Suppressed on protection, this works because no partial store is
possible, because the operand cannot span multiple pages.
* PCISTB
* MPCIFC
* STPCIFC
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220506153956.2217601-3-scgl@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
One less P needed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220523115123.150340-1-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Message-Id: <20220412165836.355850-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
[ dh: take care of compat machines ]
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-13-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-12-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-11-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-10-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220428094708.84835-9-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-8-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-7-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-6-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Before we were able to bump up the qemu CPU model to a z13, we included
some experimental features during development in the "max" model only.
Nowadays, the "max" model corresponds exactly to the "qemu" CPU model
of the latest QEMU machine under TCG.
Let's remove all the special casing, effectively making both models
match completely from now on, and clean up.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220428094708.84835-4-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We don't include the "msa5" feature in the "qemu" model because it
generates a warning. The PoP states:
"The message-security-assist extension 5 requires
the secure-hash-algorithm (SHA-512) capabilities of
the message-security-assist extension 2 as a prereq-
uisite. (March, 2015)"
As SHA-512 won't be supported in the near future, let's just drop the
feature from the "max" model. This avoids the warning and allows us for
making the "max" model match the "qemu" model (except for compat
machines). We don't lose much, as we only implement the function stubs
for MSA, excluding any real subfunctions.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/897
Message-Id: <20220428094708.84835-3-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes: 0e0a5b49ad ("s390x/tcg: Implement VECTOR STORE WITH LENGTH")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Miller <dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-2-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Coverity rightly reports that 0xff << pos can overflow.
This would affect the ICMH instruction.
Fixes: Coverity CID 1487161
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220401193659.332079-1-richard.henderson@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by Paul Eggert in
https://lists.gnu.org/archive/html/bug-gnulib/2021-09/msg00050.html
This program currently prints different results when run with TCG instead
of running on real s390x hardware:
#include <stdio.h>
int overflow_32 (int x, int y)
{
int sum;
return __builtin_sub_overflow (x, y, &sum);
}
int overflow_64 (long long x, long long y)
{
long sum;
return __builtin_sub_overflow (x, y, &sum);
}
int a1 = 0;
int b1 = -2147483648;
long long a2 = 0L;
long long b2 = -9223372036854775808L;
int main ()
{
{
int a = a1;
int b = b1;
printf ("a = 0x%x, b = 0x%x\n", a, b);
printf ("no_overflow = %d\n", ! overflow_32 (a, b));
}
{
long long a = a2;
long long b = b2;
printf ("a = 0x%llx, b = 0x%llx\n", a, b);
printf ("no_overflow = %d\n", ! overflow_64 (a, b));
}
}
Signed-off-by: Bruno Haible <bruno@clisp.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/618
Message-Id: <20220323162621.139313-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This program currently prints different results when run with TCG instead
of running on real s390x hardware:
#include <stdio.h>
int overflow_32 (int x, int y)
{
int sum;
return ! __builtin_add_overflow (x, y, &sum);
}
int overflow_64 (long long x, long long y)
{
long sum;
return ! __builtin_add_overflow (x, y, &sum);
}
int a1 = -2147483648;
int b1 = -2147483648;
long long a2 = -9223372036854775808L;
long long b2 = -9223372036854775808L;
int main ()
{
{
int a = a1;
int b = b1;
printf ("a = 0x%x, b = 0x%x\n", a, b);
printf ("no_overflow = %d\n", overflow_32 (a, b));
}
{
long long a = a2;
long long b = b2;
printf ("a = 0x%llx, b = 0x%llx\n", a, b);
printf ("no_overflow = %d\n", overflow_64 (a, b));
}
}
Signed-off-by: Bruno Haible <bruno@clisp.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/616
Message-Id: <20220323162621.139313-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
When RI2 is 0x80000000, qemu enters an infinite loop instead of jumping
backwards. Fix by adding a missing cast, like in in2_ri2().
Fixes: 7233f2ed17 ("target-s390: Convert BRANCH ON CONDITION")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220314104232.675863-3-iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When RI2 is 0x80000000, qemu enters an infinite loop instead of jumping
backwards. Fix by adding a missing cast, like in in2_ri2().
Fixes: 8ac33cdb8b ("Convert BRANCH AND SAVE")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220314104232.675863-2-iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
TCG implements everything we need to run basic z15 OS+software
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-3-dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
implements:
AND WITH COMPLEMENT (NCRK, NCGRK)
NAND (NNRK, NNGRK)
NOT EXCLUSIVE OR (NXRK, NXGRK)
NOR (NORK, NOGRK)
OR WITH COMPLEMENT (OCRK, OCGRK)
SELECT (SELR, SELGR)
SELECT HIGH (SELFHR)
MOVE RIGHT TO LEFT (MVCRL)
POPULATION COUNT (POPCNT)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/737
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-2-dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We previously loaded into in1, but in1 is not filled during
disassembly and hence always zero. This leads to an assertion failure:
qemu-system-s390x: /home/nrb/qemu/include/tcg/tcg.h:654: temp_idx:
Assertion `n >= 0 && n < tcg_ctx->nb_temps' failed.`
Instead, use in2_la2_m64a to load from storage into in2 and pass that to
the helper, which matches what we already do for SCKC.
This fixes the SCK test I sent here under TCG:
<https://www.spinics.net/lists/kvm/msg265169.html>
Fixes: 9dc67537 ("s390x/tcg: implement SET CLOCK ")
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Message-Id: <20220126084201.774457-1-nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Some small fixes for the qtests
* Misc header cleanups by Philippe
-----BEGIN PGP SIGNATURE-----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=/azS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "hardware version" machinery (qemu_set_hw_version(),
qemu_hw_version(), and the QEMU_HW_VERSION define) is used by fewer
than 10 files. Move it out from osdep.h into a new
qemu/hw-version.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-6-peter.maydell@linaro.org
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's wait to mark the VCPU STOPPED until the possible
STORE STATUS operation is completed, so that we know the
CPU is fully stopped and done doing anything. (When we
also clear the possible sigp_order field for STOP orders.)
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20211213210919.856693-2-farman@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to PoP, both 32- and 64-bit shifts use lowest 6 address
bits. The current code special-cases 32-bit shifts to use only 5 bits,
which is not correct. For example, shifting by 32 bits currently
preserves the initial value, however, it's supposed zero it out
instead.
Fix by merging sh32 and sh64 and adapting CC calculation to shift
values greater than 31.
Fixes: cbe24bfa91 ("target-s390: Convert SHIFT, ROTATE SINGLE")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
An overflow occurs for SLAG when at least one shifted bit is not equal
to sign bit. Therefore, we need to check that `shift + 1` bits are
neither all 0s nor all 1s. The current code checks only `shift` bits,
missing some overflows.
Fixes: cbe24bfa91 ("target-s390: Convert SHIFT, ROTATE SINGLE")
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SRDA uses r1_D32 for binding the first operand and s64 for setting CC.
cout_s64() relies on o->out being the shift result, however,
wout_r1_D32() clobbers it.
Fix by using a temporary.
Fixes: a79ba3398a ("target-s390: Convert SHIFT DOUBLE")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SLDA operates on 64-bit values, so its sign bit index should be 63,
not 31.
Fixes: a79ba3398a ("target-s390: Convert SHIFT DOUBLE")
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The CPNC portion of the diag318 data is erroneously reset during an
initial CPU reset caused by SIGP. Let's go ahead and relocate the
diag318_info field within the CPUS390XState struct such that it is
only zeroed during a clear reset. This way, the CPNC will be retained
for each VCPU in the configuration after the diag318 instruction
has been invoked.
The s390_machine_reset code already takes care of zeroing the diag318
data on VM resets, which also cover resets caused by diag308.
Fixes: fabdada935 ("s390: guest support for diagnose 0x318")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20211117152303.627969-1-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These are unused since commit 075e52b816 ("s390x/cpumodel:
we are always in zarchitecture mode") and it's unlikely that we
will ever need them again. So let's simply remove them now.
Message-Id: <20211015124219.1330830-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For s390x, the only unaligned accesses that are signaled are atomic,
and we don't actually want to raise SIGBUS for those, but instead
raise a SPECIFICATION error, which the kernel will report as SIGILL.
Split out a do_unaligned_access function to share between the user-only
s390x_cpu_record_sigbus and the sysemu s390x_do_unaligned_access.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the masking of the address from cpu_loop into
s390_cpu_record_sigsegv -- this is governed by hw, not linux.
This does mean we have to raise our own exception, rather
than return to the fallback.
Use maperr to choose between PGM_PROTECTION and PGM_ADDRESSING.
Use the appropriate si_code for each in cpu_loop.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Not sure why the user-only code wasn't rewritten to use
probe_access_flags at the same time that the sysemu code
was converted. For the purpose of user-only, this is an
exact replacement.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I noticed -cpu help printing enough trailing spaces to make the output
at least 84 characters wide. Looks ugly unless the terminal is wider.
Ugly or not, trailing spaces are stupid.
The culprit is this line in x86_cpu_list_entry():
qemu_printf("x86 %-20s %-58s\n", name, desc);
This prints a string with minimum field left-justified right before a
newline. Change it to
qemu_printf("x86 %-20s %s\n", name, desc);
which avoids the trailing spaces and is simpler to boot.
A search for the pattern with "git-grep -E '%-[0-9]+s\\n'" found a few
more instances. Change them similarly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20211009152401.2982862-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Simplification of one of the SIGP instructions on s390x
* Cornelia stepping down as maintainer in some subsystems
* Update the dtc submodule to a proper release version
-----BEGIN PGP SIGNATURE-----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=fWoj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth/tags/pull-request-2021-10-15' into staging
* Check kernel command line size on s390x
* Simplification of one of the SIGP instructions on s390x
* Cornelia stepping down as maintainer in some subsystems
* Update the dtc submodule to a proper release version
# gpg: Signature made Fri 15 Oct 2021 02:11:13 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* remotes/thuth/tags/pull-request-2021-10-15:
dtc: Update to version 1.6.1
s390x virtio-ccw machine: step down as maintainer
s390x/kvm: step down as maintainer
vfio-ccw: step down as maintainer
s390x: sigp: Force Set Architecture to return Invalid Parameter
s390x/ipl: check kernel command line size
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The helper_*_mmu functions were the only thing available
when this code was written. This could have been adjusted
when we added cpu_*_mmuidx_ra, but now we can most easily
use the newest set of interfaces.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous placement in tcg/tcg.h was not logical.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to the Principles of Operation, the SIGP Set Architecture
order will return Incorrect State if some CPUs are not stopped, but
only if the CZAM facility is not present. If it is, the order will
return Invalid Parameter because the architecture mode cannot be
changed.
Since CZAM always exists when S390_FEAT_ZARCH exists, which in turn
exists for every defined CPU model, we can simplify this code.
Fixes: 075e52b816 ("s390x/cpumodel: we are always in zarchitecture mode")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20211008203811.1980478-2-farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We use INDEX_op_insn_start to make the start of instruction boundaries.
If we don't do it in the .insn_start hook things get confused especially
now plugins want to use that marking to identify the start of instructions
and will bomb out if it sees instrumented ops before the first instruction
boundary.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211011185332.166763-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have lacked expressive support for memory sizes larger
than 64-bits for a while. Fixing that requires adjustment
to several points where we used this for array indexing,
and two places that develop -Wswitch warnings after the change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we may have had some thought of allowing system-mode
to return from this hook, we have no guests that require this.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the new gen16 features to the default model and fence them for
machine version 6.1 and earlier.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210907101017.27126-1-borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's enable storage keys lazily under TCG, just as we do under KVM.
Only fairly old Linux versions actually make use of storage keys, so it
can be kind of wasteful to allocate quite some memory and track
changes and references if nobody cares.
We have to make sure to flush the TLB when enabling storage keys after
the VM was already running: otherwise it might happen that we don't
catch references or modifications afterwards.
Add proper documentation to all callbacks.
The kvm-unit-tests skey tests keeps on working with this change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-14-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Avoid setting the key if nothing changed.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-9-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's move address validation into mmu_translate() and
mmu_translate_real(). This allows for checking whether an absolute
address is valid before looking up the storage key. We can now get rid of
the ram_size check.
Interestingly, we're already handling LOAD REAL ADDRESS wrong, because
a) We're not supposed to touch storage keys
b) We're not supposed to convert to an absolute address
Let's use a fake, negative MMUAccessType to teach mmu_translate() to
fix that handling and to not perform address validation.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-8-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Looks like we forgot to adjust documentation of one parameter.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-7-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The access type is unused since commit 81d7e3bc45 ("s390x/mmu: Inject
DAT exceptions from a single place").
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-6-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's replace the ram_size check by a proper physical address space
check (for example, to prepare for memory hotplug), trigger addressing
exceptions and trace the return value of the storage key getter/setter.
Provide an helper mmu_absolute_addr_valid() to be used in other context
soon. Always test for "read" instead of "write" as we are not actually
modifying the page itself.
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-5-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For RRBE, SSKE, and ISKE, we're dealing with real addresses, so we have to
convert to an absolute address first.
In the future, when adding EDAT1 support, we'll have to pay attention to
SSKE handling, as we'll be dealing with absolute addresses when the
multiple-block control is one.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-4-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Right now we could set an 8-bit storage key via SSKE and retrieve it
again via ISKE, which is against the architecture description:
SSKE:
"
The new seven-bit storage-key value, or selected bits
thereof, is obtained from bit positions 56-62 of gen-
eral register R 1 . The contents of bit positions 0-55
and 63 of the register are ignored.
"
ISKE:
"
The seven-bit storage key is inserted in bit positions
56-62 of general register R 1 , and bit 63 is set to zero.
"
Let's properly ignore bit 63 to create the correct seven-bit storage key.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-3-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's wrap the address just like for SSKE and ISKE.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-2-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
schib->pmcw.chars is 32bit, not 16bit. This fixes the kvm-unit-tests
"css" test, which fails with:
FAIL: Channel Subsystem: measurement block format1: Unaligned MB origin:
Program interrupt: expected(21) == received(0)
Because we end up not injecting an operand program exception.
Fixes: a54b8ac340 ("css: SCHIB measurement block origin must be aligned")
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20210805143753.86520-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We not only invalidate the translation of the range 0x0-0x2000, we also
invalidate the translation of the new prefix range and the translation
of the old prefix range -- because real2abs would return different
results for all of these ranges when changing the prefix location.
This fixes the kvm-unit-tests "edat" test that just hangs before this
patch because we end up clearing the new prefix area instead of the old
prefix area.
While at it, let's not do anything in case the prefix doesn't change.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20210805125938.74034-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
arch_init.h only defines the QEMU_ARCH_* enumeration and the
arch_type global. Don't include it in files that don't use those.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210730105947.28215-8-peter.maydell@linaro.org
The hook is now unused, with breakpoints checked outside translation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always provide the atomic interface using TCGMemOpIdx oi
and uintptr_t retaddr. Rename from helper_* to cpu_* so
as to (mostly) match the exec/cpu_ldst.h functions, and
to emphasize that they are not callable from TCG directly.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have not needed to end a TB for I/O since ba3e792669
("icount: clean up cpu_can_io at the entry to the block").
In use_goto_tb, the check for singlestep_enabled is in the
generic translator_use_goto_tb. In s390x_tr_tb_stop, the
check for singlestep_enabled is in the preceding do_debug test.
Which leaves only FLAG_MASK_PER: fold that test alone into
the two callers of use_exit tb.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
split sysemu part of cpu models,
also create a tiny _user.c with just the (at least for now),
empty implementation of apply_cpu_model.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-15-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
move kvm files into kvm/
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/kvm/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-14-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
all function calls are protected by kvm_enabled(),
so we do not need the stubs.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-13-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that we have moved cpu-dump functionality out of helper.c,
we can make the module sysemu-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-11-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
move everything related to translate, as well as HELPER code in tcg/
mmu_helper.c stays put for now, as it contains both TCG and KVM code.
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/tcg/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-8-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The internal.h file is renamed to s390x-internal.h, because of the
risk of collision with other files with the same name.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-7-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
now that we protect all calls to the tcg-specific functions
with if (tcg_enabled()), we do not need the TCG stub anymore.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-6-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
the lack of target_user_arch makes it hard to fully leverage the
build system in order to separate user code from sysemu code.
Provide it, so that we can avoid the proliferation of #ifdef
in target code.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-2-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The element size is located in m5, not in m4. As there is no m4, qemu
currently crashes with an assertion, trying to lookup that field.
Reproduced and tested via GO, which ends up using VMSL once the
Vector enhancements facility is around for verifying certificates with
elliptic curves.
Reported-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/449
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fixes: 8c18fa5b3e ("s390x/tcg: Implement VECTOR MULTIPLY SUM LOGICAL")
Message-Id: <20210705090341.58289-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The FP-to-integer conversion instructions need to set CC 3 whenever
a "special case" occurs; this is the case whenever the instruction
also signals the IEEE invalid exception. (See e.g. figure 19-18
in the Principles of Operation.)
However, qemu currently will set CC 3 only in the case where the
input was a NaN. This is indeed one of the special cases, but
there are others, most notably the case where the input is out
of range of the target data type.
This patch fixes the problem by switching these instructions to
the "static" CC method and computing the correct result directly
in the helper. (It cannot be re-computed later as the information
about the invalid exception is no longer available.)
This fixes a bug observed when running the wasmtime test suite
under the s390x-linux-user target.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210630105058.GA29130@oc3748833570.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This defines 5 new facilities and the new 3931 and 3932 machines.
As before the name is not yet known and we do use gen16a and gen16b.
The new features are part of the full model.
The default model is still empty (same as z15) and will be added
in a separate patch at a later point in time.
Also add the dependencies of new facilities and as a fix for z15 add
a dependency from S390_FEAT_VECTOR_PACKED_DECIMAL_ENH to
S390_VECTOR_PACKED_DECIMAL.
[merged <20210701084348.26556-1-borntraeger@de.ibm.com>]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210622201923.150205-2-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No change in behaviour, as gdbstub was correctly written to
install and extract the cc value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-5-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use s390_cpu_get_psw_mask so that we print the correct
architectural value of psw.mask. Do not print cc_op
unless tcg_enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-4-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use this function for debugging, and debug should
not modify cpu state (even non-architectural cpu state) lest
we introduce heisenbugs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-3-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rename to s390_cpu_set_psw and s390_cpu_get_psw_mask at the
same time. Adjust so that they compile for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-2-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
TCG implements everything we need to run basic z14 OS+software.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-27-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Everything is wired up and all new instructions are implemented.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-26-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
For IEEE functions, we can reuse the softfloat implementations. For the
other functions, implement it generically for 32bit/64bit/128bit -
carefully taking care of all weird special cases according to the tables
defined in the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-24-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
128 bit -> 64 bit, there is only a single element to process.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
64 bit -> 128 bit, there is only a single final element.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In addition to 32/128bit variants, we also have to support the
"Signal-on-QNaN (SQ)" bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In case of 128bit, we always have a single element. Add new helpers for
reading/writing 32/128 bit floats.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fortunately, we only need the Doubleword implementation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
... and prepare for 32/128 bit support.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Pass the m5 field via simd_data() and don't provide specialized handlers
for single-element variants.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's rework our macros and simplify. We still need helper functions in
most cases due to the different parameters types.
Next, we'll only have 32/128bit variants for vfi and vfsq, so special
case the others.
Note that for vfsq, the XxC and erm passed in the simd_data() will never be
set, resulting in the same behavior.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's simplify, reworking our handler generation, passing the whole "m5"
register content and not providing specialized handlers for "se", and
reading/writing proper float64 values using new helpers.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's use the correct name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In case we encounter a NaN, we have to return the smallest possible
number, corresponding to either 0 or the maximum negative number. This
seems to differ from IEEE handling as implemented in softfloat, whereby
we return the biggest possible number.
While at it, use float32_to_uint64() in the CLGEB handler.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With commit 0280b3eb7c ("s390x/kvm: use cpu model for gscb on
compat machines"), we removed any calls to kvm_s390_get_gs()
in favour of a different mechanism.
Let's remove the unused kvm_s390_get_gs(), and with it the now
unneeded cap_gs as well.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210602125050.492500-1-cohuck@redhat.com>
