Skip refresh if a new dmabuf (guest scanout frame) has already been
submitted and ready to be drawn because the scanout will be updated
with new frame anyway.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230706183355.29361-2-dongwon.kim@intel.com>
Setting scanout mode is better to be done very last minute
right because the mode can be reset anytime after it is set in
dpy_gl_scanout_texture by any asynchronouse dpy_refresh call,
which eventually cancels drawing of the guest scanout texture.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230706183355.29361-1-dongwon.kim@intel.com>
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht'
and 'backing_height' as these commonly indicate the size of the
whole surface (e.g. guest's Xorg extended display). Then use
'width' and 'height' for sub region in there (e.g. guest's
scanouts).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
The primary guest scanout shows the booting screen right after reboot
but additional guest displays (i.e. max_ouptuts > 1) will keep displaying
the old frames until the guest virtio gpu driver gets initialized, which
could cause some confusion. A better way is to to replace the surface with
a place holder that tells the display is not active during the reset of
virtio-gpu device.
And to immediately update the surface with the place holder image after
the switch, displaychangelistener_gfx_switch needs to be called with
'update == TRUE' in dpy_gfx_replace_surface when the new surface is NULL.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230627224451.11739-1-dongwon.kim@intel.com>
Observed a wrong context is bound when changing the scanout mode.
To prevent problem, it is needed to make sure to bind the right
context in gtk_egl_set_scanout_mode/gtk_gl_area_set_scanout_mode
as well as unbind one in the end of gd_egl_update/gd_gl_area_update.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230628191504.17185-1-dongwon.kim@intel.com>
A wrong exit condition may lead to an infinite loop when inflating a
valid zlib buffer containing some extra bytes in the `inflate_buffer`
function. The bug only occurs post-authentication. Return the buffer
immediately if the end of the compressed data has been reached
(Z_STREAM_END).
Fixes: CVE-2023-3255
Fixes: 0bf41cab ("ui/vnc: clipboard support")
Reported-by: Kevin Denis <kevin.denis@synacktiv.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230704084210.101822-1-mcascell@redhat.com>
Add some ifdefs to avoid an unused function and unused variable.
Fixes: de1f8ce0ab ("ui/dbus: use shared D3D11 Texture2D when possible")
Co-developed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <336f7697-bcfa-1f5f-e411-6859815aa26c@eik.bme.hu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the client implements "org.qemu.Display1.Listener.Win32.D3d11" and
we are running on ANGLE/win32, share the scanout texture with the peer
process, and draw with ScanoutTexture2d/UpdateTexture2d methods.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-22-marcandre.lureau@redhat.com>
The following patch will get the underlying D3D11 Texture2D from the
virgl renderer scanout. Pass it along to the texture scanout callbacks
as a priliminary step, to simplify review.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-20-marcandre.lureau@redhat.com>
Check if ANGLE is being used with D3D backend.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-19-marcandre.lureau@redhat.com>
Enable usage of dbus,gl= on win32. At this point, the scanout texture is
read on the DisplaySurface memory, and the client is then updated with
the "2D" API (with shared memory if possible).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-16-marcandre.lureau@redhat.com>
Similar to egl_fb_read(), same limitations, but with extra arguments to
read a subset of the framebuffer. Used in following commits.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-15-marcandre.lureau@redhat.com>
Windows GL drivers are notoriously not very good. Otoh, ANGLE provides
rock solid GLES implementation on top of direct3d. We should recommend
it and default to ES when using EGL (users can easily override this if
necessary)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-14-marcandre.lureau@redhat.com>
Make GBM optional for EGL code, and enable the build for win32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-13-marcandre.lureau@redhat.com>
When the display surface has an associated HANDLE, we can duplicate it
to the client process and let it map the memory to avoid expensive copies.
Introduce two new win32-specific methods ScanoutMap and UpdateMap. The
first is used to inform the listener about the a shared map
availability, and the second for display updates.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-12-marcandre.lureau@redhat.com>
Introduce qemu_win32_map_alloc() and qemu_win32_map_free() to allocate
shared memory mapping. The handle can be used to share the mapping with
another process.
Teach qemu_create_displaysurface() to allocate shared memory. Following
patches will introduce other places for shared memory allocation.
Other patches for -display dbus will share the memory when possible with
the client, to avoid expensive memory copy between the processes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-10-marcandre.lureau@redhat.com>
This property is similar to ``org.freedesktop.DBus.Interfaces`` property
on the bus interface: it's an array of strings listing the extra
interfaces and capabilities available, in a convenient way.
Most interfaces are implicit, as they are required. For
``org/qemu/Display1_$id``, we can list the Keyboard And Mouse
interfaces. Those could be optional.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-9-marcandre.lureau@redhat.com>
D-Bus doesn't support fd-passing on Windows (AF_UNIX doesn't have
SCM_RIGHTS yet, but there are other means to share objects. I have
proposed various solutions upstream, but none seem fitting enough atm).
To make the "-display dbus" work on Windows, implement an alternative
D-Bus interface where all the 'h' (FDs) arguments are replaced with
'ay' (WSASocketW data), and sockets are passed to the other end via
WSADuplicateSocket().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-6-marcandre.lureau@redhat.com>
D-Bus on windows doesn't support fd-passing. Let's isolate the
fdlist-related code as a first step, before adding Windows support,
using another mechanism.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-4-marcandre.lureau@redhat.com>
eglMakeCurrent() returns 1/EGL_TRUE on success. This is not what the
callback expects, where 0 indicates success.
While at it, print the EGL error to ease debugging.
As with virgl_renderer_callbacks, the return value is now checked since
version >= 4:
7f09e6bf0c
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-3-marcandre.lureau@redhat.com>
It will be used from other units.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-2-marcandre.lureau@redhat.com>
Set vc->gfx.guest_fb.dmabuf to NULL to prevent any further access
to it after the dmabuf is released.
v2: move declaration of vc inside ifdef
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230627005316.5627-1-dongwon.kim@intel.com>
x and y offsets and width and height of the scanout texture
is not correctly configured in case guest scanout frame is
dmabuf.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-ID: <20230621213150.29573-1-dongwon.kim@intel.com>
So that clients making use of the DBus backend could
send touch events through the new org.qemu.Display1.Touch
interface
Signed-off-by: Bilal Elmoussaoui <belmouss@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230619095337.9899-3-belmouss@redhat.com>
To share code between the GTK and DBus UI bakcends
see the next commit for details
Signed-off-by: Bilal Elmoussaoui <belmouss@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230619095337.9899-2-belmouss@redhat.com>
When OpenGL is enabled, create only the OpenGL context, ignoring the SDL
renderer as it is unused anyway.
Signed-off-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230612091959.2983-1-quic_acaggian@quicinc.com>
libepoxy handles loading the function pointer and dispatching the call,
so you don't have to worry about it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230515132455.1025608-1-marcandre.lureau@redhat.com>
VNC may try to get the current cursor even when there are no consoles
and crashes. Simple reproducer is qemu with -nodefaults.
Fixes: (again)
https://gitlab.com/qemu-project/qemu/-/issues/1548
Fixes: commit 385ac97f8 ("ui: keep current cursor with QemuConsole")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230428154807.2143652-1-marcandre.lureau@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix the following Cocoa trivial warnings:
C compiler for the host machine: cc (clang 14.0.0 "Apple clang version 14.0.0 (clang-1400.0.29.202)")
Objective-C compiler for the host machine: clang (clang 14.0.0)
[100/334] Compiling Objective-C object libcommon.fa.p/net_vmnet-bridged.m.o
net/vmnet-bridged.m:40:31: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
static char* get_valid_ifnames()
^
void
[742/1436] Compiling Objective-C object libcommon.fa.p/ui_cocoa.m.o
ui/cocoa.m:1937:22: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
static int cocoa_main()
^
void
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230425192820.34063-1-philmd@linaro.org>
job may be NULL if queue->exit is true. Check
it before dereference job.
Fixes: f31f9c1080 ("vnc: add magic cookie to VncState")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's already confusing that we have two very similar functions for
wrapping the parse of a 64-bit unsigned value, differing mainly on
whether they permit leading '-'. Adjust the signature of parse_uint()
and parse_uint_full() to be like all of qemu_strto*(): put the result
parameter last, use the same types (uint64_t and unsigned long long
have the same width, but are not always the same type), and mark
endptr const (this latter change only affects the rare caller of
parse_uint). Adjust all callers in the tree.
While at it, note that since cutils.c already includes:
QEMU_BUILD_BUG_ON(sizeof(int64_t) != sizeof(long long));
we are guaranteed that the result of parse_uint* cannot exceed
UINT64_MAX (or the build would have failed), so we can drop
pre-existing dead comparisons in opts-visitor.c that were never false.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-8-eblake@redhat.com>
[eblake: Drop dead code spotted by Markus]
Signed-off-by: Eric Blake <eblake@redhat.com>
GTK3 provides the infrastructure to receive and process multi-touch
events through the "touch-event" signal and the GdkEventTouch type.
Make use of it to transpose events from the host to the guest.
This allows users of machines with hardware capable of receiving
multi-touch events to run guests that can also receive those events
and interpret them as gestures, when appropriate.
An example of this in action can be seen here:
https://fosstodon.org/@slp/109545849296546767
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230526112925.38794-7-slp@redhat.com>
Add helpers for generating Multi-touch events from the UI backends that
can be sent to the guest through a virtio-multitouch device.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230526112925.38794-6-slp@redhat.com>
Although not actually exploitable at the moment, a negative width/height
could make datasize wrap around and potentially lead to buffer overflow.
Since there is no reason a negative width/height is ever appropriate,
modify QEMUCursor struct and cursor_alloc prototype to accept uint16_t.
This protects us against accidentally introducing future bugs.
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Jacek Halon <jacek.halon@gmail.com>
Reported-by: Yair Mizrahi <yairh33@gmail.com>
Reported-by: Elsayed El-Refa'ei <e.elrefaei99@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230523163023.608121-1-mcascell@redhat.com>
Windows sends an extra left control key up/down input event for
every right alt key up/down input event for keyboards with
international layout. Since commit 830473455f ("ui/sdl2: fix
handling of AltGr key on Windows") QEMU uses a Windows low level
keyboard hook procedure to reliably filter out the special left
control key and to grab the keyboard on Windows.
The SDL2 version 2.0.16 introduced its own Windows low level
keyboard hook procedure to grab the keyboard. Windows calls this
callback before the QEMU keyboard hook procedure. This disables
the special left control key filter when the keyboard is grabbed.
To fix the problem, disable the SDL2 Windows low level keyboard
hook procedure.
Reported-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230418062823.5683-1-vr_qemu@t-online.de>
SDL doesn't grab Alt+F4 under Windows by default. Pressing Alt+F4 thus closes
the VM immediately without confirmation, possibly leading to data loss. Fix
this by always grabbing Alt+F4 on Windows hosts, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417192139.43263-3-shentey@gmail.com>
By default, SDL grabs Alt+Tab only in non-fullscreen mode. This causes Alt+Tab
to switch tasks on the host rather than in the VM in fullscreen mode while it
switches tasks in non-fullscreen mode in the VM. Fix this confusing behavior
by grabbing Alt+Tab in fullscreen mode, always causing tasks to be switched in
the VM.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417192139.43263-2-shentey@gmail.com>
Except SDL, display backends seem to fail at handing full scanout
geometry correctly. It would need some test/reproducer to actually check
it. In the meantime, fill some missing fields, and leave a FIXME.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230515132537.1026310-1-marcandre.lureau@redhat.com>
On Windows, we don't use the low-level GBM/EGL helpers (no dmabuf etc),
we can turn on GL area support for the rest of rendering.
(fwiw, GDK backend may be either WGL or EGL)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230515132527.1026064-1-marcandre.lureau@redhat.com>
commit 4814d3cbf ("ui/dbus: restrict opengl to gbm-enabled config")
assumes that whenever GBM is available, OpenGL is. This is not always
the case, let's further restrict opengl-related paths and fix some
compilation issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230515132348.1024663-1-marcandre.lureau@redhat.com>
Before sdl2_gl_update() is called, sdl2_gl_switch() may decide to
destroy the console window and its associated shaders.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1644
Fixes: c84ab0a500 ("ui/console: optionally update after gfx switch")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20230511074217.4171842-1-marcandre.lureau@redhat.com>
vc->gfx.w and vc->gfx.h are not updated appropriately in this code path,
which leads to a different scaling factor for rendering the cursor on
some edge cases (e.g. the focus has left and re-entered the gtk window).
This can be reproduced using vhost-user-gpu with the gtk ui on the x11
backend.
Use the surface dimensions which are already updated accordingly.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230320160856.364319-2-ernunes@redhat.com>
The gd_motion_event size has some calculations for the cursor position,
which also take into account things like different size of the
framebuffer compared to the window size.
The use of window size makes things more difficult though, as at least
in the case of Wayland includes the size of ui elements like a menu bar
at the top of the window. This leads to a wrong position calculation by
a few pixels.
Fix it by using the size of the widget, which already returns the size
of the actual space to render the framebuffer.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20230320160856.364319-1-ernunes@redhat.com>
The dmabuf->y0_top flag is passed to .dpy_gl_scanout_dmabuf(), however
in the gtk ui both implementations dropped it when doing the next
scanout_texture call.
Fixes flipped linux console using vhost-user-gpu with the gtk ui
display.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230220175605.43759-1-ernunes@redhat.com>
By using a subproject, our own meson.build can use variables from
the subproject instead of hard-coded paths. This is also the first step
towards managing downloads with .wrap files instead of submodule.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
