Augment the GICv3's QOM device interface by adding one
new set of sysbus IRQ line, to signal NMI to each CPU.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-11-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set or clear PSTATE.ALLINT on taking an exception to ELx according to the
SCTLR_ELx.SPINTMASK bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-10-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add IS and FS bit in ISR_EL1 and handle the read. With CPU_INTERRUPT_NMI or
CPU_INTERRUPT_VINMI, both CPSR_I and ISR_IS must be set. With
CPU_INTERRUPT_VFNMI, both CPSR_F and ISR_FS must be set.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-9-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so handle NMI same as IRQ in
arm_phys_excp_target_el().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-8-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This only implements the external delivery method via the GICv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-7-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ALLINT MSR (immediate) to decodetree, in which the CRm is 0b000x. The
EL0 check is necessary to ALLINT, and the EL1 check is necessary when
imm == 1. So implement it inline for EL2/3, or EL1 with imm==0. Avoid the
unconditional write to pc and use raise_exception_ra to unwind.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-5-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_NMI. NMI (FEAT_NMI) is an mandatory feature in
ARMv8.8-A and ARM v9.3-A.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-4-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When PSTATE.ALLINT is set, an IRQ or FIQ interrupt that is targeted to
ELx, with or without superpriority is masked. As Richard suggested, place
ALLINT bit in PSTATE in env->pstate.
In the pseudocode, AArch64.ExceptionReturn() calls SetPSTATEFromPSR(), which
treats PSTATE.ALLINT as one of the bits which are reinstated from SPSR to
PSTATE regardless of whether this is an illegal exception return or not. So
handle PSTATE.ALLINT the same way as PSTATE.DAIF in the illegal_return exit
path of the exception_return helper. With the change, exception entry and
return are automatically handled.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-3-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_NMI defines another three new bits in HCRX_EL2: TALLINT, HCRX_VINMI and
HCRX_VFNMI. When the feature is enabled, allow these bits to be written in
HCRX_EL2.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-2-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move APIC related code split in cpu-sysemu.c and
monitor.c to cpu-apic.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240321154838.95771-4-philmd@linaro.org>
Commit fd3f7d24d4 ("include/hw/core: Remove i386 conditional
on fake_user_interrupt") remove the need to check on NEED_CPU_H.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240321154838.95771-3-philmd@linaro.org>
This script runs QEMU to obtain compat_props of machines and default
values of different types of drivers to produce comparison table. This
table can be used to compare machine types to choose the most suitable
machine or compare binaries to be sure that migration to the newer version
will save all device properties. Also the json or csv format of this
table can be used to check does a new machine affect the previous ones by
comparing tables with and without the new machine.
Default values (that will be used without machine compat_props) of
properties are needed to fill "holes" in the table (one machine has
the property but another machine not. For instance, 2.12 machine has
`{ "EPYC-" TYPE_X86_CPU, "xlevel", "0x8000000a" }`, but compat_pros of
3.1 machine doesn't have it. Thus, to compare these machines we need to
get unknown value of "EPYC-x86_64-cpu-xlevel" for 3.1 machine. These
unknown values in the table are called "holes". To get values for these
"holes" the script uses list of appropriate methods.)
Notes:
* Some init values from the devices can't be available like properties
from virtio-9p when configure has --disable-virtfs. This situations will
be seen in the table as "unavailable driver".
* Default values can be obtained in an unobvious way, like x86 features.
If the script doesn't know how to get property default value to compare
one machine with another it fills "holes" with "unavailable method". This
is done because script uses whitelist model to get default values of
different types. It means that the method that can't be applied to a new
type that can crash this script. It is better to get an "unavailable
driver" when creating a new machine with new compatible properties than
to break this script. So it turns out a more stable and generic script.
* If the default value can't be obtained because this property doesn't
exist or because this property can't have default value, appropriate
"hole" will be filled by "unknown property" or "no default value"
* If the property is applied to the abstract class, the script collects
default values from all child classes and prints all these classes
* Raw table (--raw flag) should be used with json/csv parameters for
scripts and etc. Human-readable (default) format contains transformed
and simplified values and it doesn't contain lines with the same values
in columns
Example:
./scripts/compare-machine-types.py --mt pc-q35-6.2 pc-q35-7.1
╒══════════════════╤══════════════════════════╤════════════════════════════╤════════════════════════════╕
│ Driver │ Property │ build/qemu-system-x86_64 │ build/qemu-system-x86_64 │
│ │ │ pc-q35-6.2 │ pc-q35-7.1 │
╞══════════════════╪══════════════════════════╪════════════════════════════╪════════════════════════════╡
│ PIIX4_PM │ x-not-migrate-acpi-index │ True │ False │
├──────────────────┼──────────────────────────┼────────────────────────────┼────────────────────────────┤
│ arm-gicv3-common │ force-8-bit-prio │ True │ unavailable driver │
├──────────────────┼──────────────────────────┼────────────────────────────┼────────────────────────────┤
│ nvme-ns │ eui64-default │ True │ False │
├──────────────────┼──────────────────────────┼────────────────────────────┼────────────────────────────┤
│ virtio-mem │ unplugged-inaccessible │ False │ auto │
╘══════════════════╧══════════════════════════╧════════════════════════════╧════════════════════════════╛
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240318213550.155573-5-davydov-max@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a supportive property to access the path to the QEMU binary
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240318213550.155573-4-davydov-max@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To control that creating new machine type doesn't affect the previous
types (their compat_props) and to check complex compat_props inheritance
we need qmp command to print machine type compatibility properties.
This patch adds the ability to get list of all the compat_props of the
corresponding supported machines for their comparison via new optional
argument of "query-machines" command. Since information on compatibility
properties can increase the command output by a factor of 40, add an
argument to enable it, default off.
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240318213550.155573-3-davydov-max@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
qmp_qom_list_properties can print default values if they are available
as qmp_device_list_properties does, because both of them use the
ObjectPropertyInfo structure with default_value field. This can be useful
when working with "not device" types (e.g. memory-backend).
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240318213550.155573-2-davydov-max@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
RHEL 9 (and thus also the derivatives) have been available since two
years now, so according to QEMU's support policy, we can drop the active
support for the previous major version 8 now.
Another reason for doing this is that Centos Stream 8 will go EOL soon:
https://blog.centos.org/2023/04/end-dates-are-coming-for-centos-stream-8-and-centos-linux-7/
"After May 31, 2024, CentOS Stream 8 will be archived
and no further updates will be provided."
Thus upgrade our CentOS Stream container to major version 9 now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This update adds the removing of the EXTERNALLY-MANAGED marker files
that has been added to the lcitool recently.
Quoting Daniel:
"For those who don't know, python now commonly blocks the ability to
run 'pip install' outside of a venv. This generally makes sense for
a precious installation environment. Our containers are disposable
though, so a venv has no benefit. Removing the 'EXTERNALLY-MANAGED'
allows the historical arbitrary use of 'pip' outside a venv.
lcitool just does this unconditionally given the containers are
not precious."
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We need the latest fixes for the lcitool to be able to properly
update our CentOS docker file to CentOS Stream 9.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since Ubuntu 22.04 has now been available for more than two years, we
can stop actively supporting the previous LTS version of Ubuntu now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240418101056.302103-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are doing a lot of cross-compilation tests with GCC in the gitlab-CI
already, so we could get some more test coverage by using Clang in the
Travis-CI instead. Thus let's switch two additional jobs to use Clang
for compilation.
Message-ID: <20240320104144.823425-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to our support policy, we'll soon drop our official support
for Ubuntu 20.04 ("Focal Fossa") in QEMU. Thus we should update the
Travis jobs now to a newer release (Ubuntu 22.04 - "Jammy Jellyfish")
for future testing. Since all jobs are using this release now, we
can drop the entries from the individual jobs and use the global
setting again.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This variable was used to allow jobs to fail without spoiling the
overall result. But the required "allow_failures:" hunk has been
accidentally removed in commit 9d03f5abed ("travis.yml: Remove the
"Release tarball" job"), and it was anyway only useful while we
still had the x86 jobs here around that were our main CI jobs.
Thus let's simply remove this useless variable now.
Message-ID: <20240320104144.823425-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit c1073e44b4.
The Avocado tests have been removed from Travis a long time ago with
commit c5008c76ee ("gitlab: add acceptance testing to system builds"),
so we don't need to cache the avocado files here anymore.
Message-ID: <20240320104144.823425-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e4e98c7eeb ("pc: q35: Bump max_cpus to 4096 vcpus") increases
the supported CPUs for PC Q35 machine.
Update maximum CPU numbers for PC Q35 in the document.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240412085358.731560-1-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The messages for assertions using hexadecimal numbers will be
easier to understand with `g_assert_cmphex`.
Cases changed : "cmpuint.*0x", "cmpuint.*<<"
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-ID: <20240414173349.31194-1-ines.varhol@telecom-paris.fr>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I will leave KAMP in the next days. Update email to stay reachable.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-ID: <20230105095039.182718-1-pl@kamp.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
target/m68k: Support semihosting on non-ColdFire targets
linux-user: do_setsockopt cleanups
linux-user: Add FITRIM ioctl
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmYpjHcdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+a/Af7BHmDB27U61b9i8et
cObewYH9y9M+iaCrIflNZPAaoguHDRKOuvw+PFT/dIo5FL2D509vYOuxUow1qLsy
q6b6kdvXROq9WU2NiuB86Abl/4mwwzxRhFah+Eh+OYSA2/pQnkcULkouLqxjFfF0
xTBzZtHtYdTbCTVRbpd6XrwLo7Qrs85ovl4wVD1r+T2T8FkvrryoNOA/VjUWxyeh
3b1X1I0wtOTnEA7JSr17JCXWZGENCmTO35r6WSYzJy5U/C59PjjgaaeMi3R3lQTJ
gg21EH0hlU1nTiPLg2ypj3l9NbIGAincAdDF/jufee+R75YSPdpKoDH8tUlUGsnM
CRx5Xg==
=J+5K
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240424' of https://gitlab.com/rth7680/qemu into staging
meson: Make DEBUG_REMAP a meson option
target/m68k: Support semihosting on non-ColdFire targets
linux-user: do_setsockopt cleanups
linux-user: Add FITRIM ioctl
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmYpjHcdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+a/Af7BHmDB27U61b9i8et
# cObewYH9y9M+iaCrIflNZPAaoguHDRKOuvw+PFT/dIo5FL2D509vYOuxUow1qLsy
# q6b6kdvXROq9WU2NiuB86Abl/4mwwzxRhFah+Eh+OYSA2/pQnkcULkouLqxjFfF0
# xTBzZtHtYdTbCTVRbpd6XrwLo7Qrs85ovl4wVD1r+T2T8FkvrryoNOA/VjUWxyeh
# 3b1X1I0wtOTnEA7JSr17JCXWZGENCmTO35r6WSYzJy5U/C59PjjgaaeMi3R3lQTJ
# gg21EH0hlU1nTiPLg2ypj3l9NbIGAincAdDF/jufee+R75YSPdpKoDH8tUlUGsnM
# CRx5Xg==
# =J+5K
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Apr 2024 03:49:27 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240424' of https://gitlab.com/rth7680/qemu:
target/m68k: Support semihosting on non-ColdFire targets
target/m68k: Perform the semihosting test during translate
target/m68k: Pass semihosting arg to exit
linux-user: Add FITRIM ioctl
linux-user: do_setsockopt: eliminate goto in switch for SO_SNDTIMEO
linux-user: do_setsockopt: make ip_mreq_source local to the place where it is used
linux-user: do_setsockopt: make ip_mreq local to the place it is used and inline target_to_host_ip_mreq()
linux-user: do_setsockopt: fix SOL_ALG.ALG_SET_KEY
meson: Make DEBUG_REMAP a meson option
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to the m68k semihosting spec:
"The instruction used to trigger a semihosting request depends on the
m68k processor variant. On ColdFire, "halt" is used; on other processors
(which don't implement "halt"), "bkpt #0" may be used."
Add support for non-CodeFire processors by matching BKPT #0 instructions.
Signed-off-by: Keith Packard <keithp@keithp.com>
[rth: Use semihosting_test()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace EXCP_HALT_INSN by EXCP_SEMIHOSTING. Perform the pre-
and post-insn tests during translate, leaving only the actual
semihosting operation for the exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of using d0 (the semihost function number), use d1 (the
provide exit status).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230802161914.395443-2-keithp@keithp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tiny patch to add the missing FITRIM ioctl.
Signed-off-by: Michael Vogt <mvogt@redhat.com>
Message-Id: <20240403092048.16023-2-michael.vogt@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There's identical code for SO_SNDTIMEO and SO_RCVTIMEO, currently
implemented using an ugly goto into another switch case. Eliminate
that using arithmetic if, making code flow more natural.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-5-mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-4-mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ip_mreq is declared at the beginning of do_setsockopt(), while
it is used in only one place. Move its declaration to that very
place and replace pointer to alloca()-allocated memory with the
structure itself.
target_to_host_ip_mreq() is used only once, inline it.
This change also properly handles TARGET_EFAULT when the address
is wrong.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-3-mjt@tls.msk.ru>
[rth: Fix braces, adjust optlen to match host structure size]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This setsockopt accepts zero-lengh optlen (current qemu implementation
does not allow this). Also, there's no need to make a copy of the key,
it is enough to use lock_user() (which accepts zero length already).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2197
Fixes: f31dddd2fc "linux-user: Add support for setsockopt() option SOL_ALG"
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-2-mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently DEBUG_REMAP is a macro that needs to be manually #defined to
be activated, which makes it hard to have separate build directories
dedicated to testing the code with it. Promote it to a meson option.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240312002402.14344-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GlusterFS+RDMA has been deprecated 8 years ago in commit
0552ff2465 ("block/gluster: deprecate rdma support"):
gluster volfile server fetch happens through unix and/or tcp,
it doesn't support volfile fetch over rdma. The rdma code may
actually mislead, so to make sure things do not break, for now
we fallback to tcp when requested for rdma, with a warning.
If you are wondering how this worked all these days, its the
gluster libgfapi code which handles anything other than unix
transport as socket/tcp, sad but true.
Besides, the whole RDMA subsystem was deprecated in commit
e9a54265f5 ("hw/rdma: Deprecate the pvrdma device and the rdma
subsystem") released in v8.2.
Cc: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240328130255.52257-4-philmd@linaro.org>
The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released in v8.2.
Remove:
- PVRDMA device
- generated vmw_pvrdma/ directory from linux-headers
- rdmacm-mux tool from contrib/
Cc: Yuval Shaia <yuval.shaia.ml@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240328130255.52257-2-philmd@linaro.org>
The ALTERA_TIMER was only used by Nios II machines,
which have been removed. Since it has no direct user,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240327144806.11319-4-philmd@linaro.org>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
Due to company policies, I have changed my mail address. Updating
MAINTAINERS and .mailmap to show my latest mail address.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Message-ID: <20240228080625.2412372-1-sriram.yagnaraman@ericsson.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
QAPISchema.lookup_entity() takes an optional type argument, a subtype
of QAPISchemaDefinition, and returns that type or None. Callers can
use this to save themselves an isinstance() test.
The only remaining user of this convenience feature is .lookup_type().
But we don't actually save anything anymore there: we still need the
isinstance() to help mypy over the hump.
Drop the .lookup_entity() argument, and adjust .lookup_type().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-26-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Commit message typo fixed]
Entities with names starting with q_obj_ are implicit object types.
Therefore, QAPISchema._make_implicit_object_type()'s .lookup_entity()
can only return a QAPISchemaObjectType. Assert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-25-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
With strict typing enabled, these runtime statements aren't necessary
anymore; we can prove them statically.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-24-armbru@redhat.com>
This patch can be rolled in with the previous one once the series is
ready for merge, but for work-in-progress' sake, it's separate here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-23-armbru@redhat.com>
