Since 'block-export-add' is new to 5.2, we can still tweak the
interface; there, allowing 'bitmaps':['str'] is nicer than
'bitmap':'str'. This wires up the qapi and qemu-nbd changes to permit
passing multiple bitmaps as distinct metadata contexts that the NBD
client may request, but the actual support for more than one will
require a further patch to the server.
Note that there are no changes made to the existing deprecated
'nbd-server-add' command; this required splitting the QAPI type
BlockExportOptionsNbd, which fortunately does not affect QMP
introspection.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some registers. Each controller controls up to 32 pins.
Each individual pin is modeled as a pair of unnamed GPIOs -- one for
emitting the actual pin state, and one for driving the pin externally.
Like the nRF51 GPIO controller, a gpio level may be negative, which
means the pin is not driven, or floating.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NPCM730 and NPCM750 chips have a single USB host port shared between
a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This
adds support for both of them.
Testing notes:
* With -device usb-kbd, qemu will automatically insert a full-speed
hub, and the keyboard becomes controlled by the OHCI controller.
* With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly
attached to the port without any hubs, and the device becomes
controlled by the EHCI controller since it's high speed capable.
* With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the
keyboard is directly attached to the port, but it only advertises
itself as full-speed capable, so it becomes controlled by the OHCI
controller.
In all cases, the keyboard device enumerates correctly.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The RNG module returns a byte of randomness when the Data Valid bit is
set.
This implementation ignores the prescaler setting, and loads a new value
into RNGD every time RNGCS is read while the RNG is enabled and random
data is available.
A qtest featuring some simple randomness tests is included.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The option has never been mentioned in our documentation, it's been
deprecated since years, it's marked with QEMU_ARCH_I386 (which does
not make sense anymore since KVM is available on other architectures,
too), it does not do anything by default in upstream QEMU (since TCG
is the default here anyway), and we're spending too much precious time
each year discussing whether it makes sense to keep this option as a
nice suger or not... let's finally put an end on this and remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201020160504.62460-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
. Fix some comment spelling errors
. Demacro some TCG helpers
. Add loongson-ext lswc2/lsdc2 group of instructions
. Log unimplemented cache opcode
. Increase number of TLB entries on the 34Kf core
. Allow the CPU to use dynamic frequencies
. Calculate the CP0 timer period using the CPU frequency
. Set CPU frequency for each machine
. Fix Malta FPGA I/O region size
. Allow running qtests when ROM is missing
. Add record/replay acceptance tests
. Update MIPS CPU documentation
. MAINTAINERS updates
CI jobs results:
https://gitlab.com/philmd/qemu/-/pipelines/203931842https://travis-ci.org/github/philmd/qemu/builds/736491461https://cirrus-ci.com/build/6272264062631936https://app.shippable.com/github/philmd/qemu/runs/886/summary/console
-----BEGIN PGP SIGNATURE-----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=BOxw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-next-20201017' into staging
MIPS patches queue
. Fix some comment spelling errors
. Demacro some TCG helpers
. Add loongson-ext lswc2/lsdc2 group of instructions
. Log unimplemented cache opcode
. Increase number of TLB entries on the 34Kf core
. Allow the CPU to use dynamic frequencies
. Calculate the CP0 timer period using the CPU frequency
. Set CPU frequency for each machine
. Fix Malta FPGA I/O region size
. Allow running qtests when ROM is missing
. Add record/replay acceptance tests
. Update MIPS CPU documentation
. MAINTAINERS updates
CI jobs results:
https://gitlab.com/philmd/qemu/-/pipelines/203931842https://travis-ci.org/github/philmd/qemu/builds/736491461https://cirrus-ci.com/build/6272264062631936https://app.shippable.com/github/philmd/qemu/runs/886/summary/console
# gpg: Signature made Sat 17 Oct 2020 14:59:53 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/mips-next-20201017: (44 commits)
target/mips: Increase number of TLB entries on the 34Kf core (16 -> 64)
MAINTAINERS: Remove duplicated Malta test entries
MAINTAINERS: Downgrade MIPS Boston to 'Odd Fixes', fix Paul Burton mail
MAINTAINERS: Put myself forward for MIPS target
MAINTAINERS: Remove myself
docs/system: Update MIPS CPU documentation
tests/acceptance: Add MIPS record/replay tests
hw/mips: Remove exit(1) in case of missing ROM
hw/mips: Rename TYPE_MIPS_BOSTON to TYPE_BOSTON
hw/mips: Simplify code using ROUND_UP(INITRD_PAGE_SIZE)
hw/mips: Simplify loading 64-bit ELF kernels
hw/mips/malta: Use clearer qdev style
hw/mips/malta: Move gt64120 related code together
hw/mips/malta: Fix FPGA I/O region size
target/mips/cpu: Display warning when CPU is used without input clock
hw/mips/cps: Do not allow use without input clock
hw/mips/malta: Set CPU frequency to 320 MHz
hw/mips/boston: Set CPU frequency to 1 GHz
hw/mips/cps: Expose input clock and connect it to CPU cores
hw/mips/jazz: Correct CPU frequencies
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This thread from a little over a year ago:
http://lists.wpkg.org/pipermail/sheepdog/2019-March/thread.html
states that sheepdog is no longer actively developed. The only mentioned
users are some companies who are said to have it for legacy reasons with
plans to replace it by Ceph. There is talk about cutting out existing
features to turn it into a simple demo of how to write a distributed
block service. There is no evidence of anyone working on that idea:
https://github.com/sheepdog/sheepdog/commits/master
No real commits to git since Jan 2018, and before then just some minor
technical debt cleanup.
There is essentially no activity on the mailing list aside from
patches to QEMU that get CC'd due to our MAINTAINERS entry.
Fedora packages for sheepdog failed to build from upstream source
because of the more strict linker that no longer merges duplicate
global symbols. Fedora patches it to add the missing "extern"
annotations and presumably other distros do to, but upstream source
remains broken.
There is only basic compile testing, no functional testing of the
driver.
Since there are no build pre-requisites the sheepdog driver is currently
enabled unconditionally. This would result in configure issuing a
deprecation warning by default for all users. Thus the configure default
is changed to disable it, requiring users to pass --enable-sheepdog to
build the driver.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201002113243.2347710-3-berrange@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Icelake-Client CPU models will be removed in the future.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1600758855-80046-2-git-send-email-robert.hu@linux.intel.com>
[ehabkost: reword deprecation note, fix version in doc]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It is currently unclear whether anybody is still using the 'moxie' CPU,
and there are no images for testing available this CPU, so the code has
likely bit-rotten in the course of time. When I asked the maintainer
for information, I did not get a reply within four weeks yet (see
https://lists.gnu.org/archive/html/qemu-devel/2020-08/msg07201.html).
The last Signed-off-by line from Anthony in our repo is from 2013,
so it seems like this code is rather unmaintained. Time to put it onto
the deprecation list to see whether somebody is still interested in this
code or whether we could remove it in a couple of releases.
Message-Id: <20200923171815.97801-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These QMP commands are replaced by block-export-add/del.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-28-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
it's was deprecated since 3.1
Support for invalid topologies is removed, the user must ensure
that topologies described with -smp include all possible cpus,
i.e. (sockets * cores * threads) == maxcpus or QEMU will
exit with error.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by:
Message-Id: <20200911133202.938754-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it was actually removed in 5.0,
commit 68a86dc15c (numa: remove deprecated -mem-path fallback to anonymous RAM)
clean up forgotten remnants in docs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-3-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it was deprecated since 4.1
commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes)
Users of existing VMs, wishing to preserve the same RAM distribution,
should configure it explicitly using ``-numa node,memdev`` options.
Current RAM distribution can be retrieved using HMP command
`info numa` and if separate memory devices (pc|nv-dimm) are present
use `info memory-device` and subtract device memory from output of
`info numa`.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
lm32 and unicore32 are softmmut targets, and not linux-user targets.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200923080015.77373-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The sentence explaining the deprecation schedule is ambiguous. Make it
clear that a feature deprecated in the Nth release is guaranteed to
remain available in the N+1th release. Removal can occur in the N+2nd
release or later.
As an example of this in action, see commit
25956af3fe ("block: Finish deprecation of
'qemu-img convert -n -o'"). The feature was deprecated in QEMU 4.2.0. It
was present in the 5.0.0 release and removed in the 5.1.0 release.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915150734.711426-1-stefanha@redhat.com>
it's was deprecated since 3.1
Support for invalid topologies is removed, the user must ensure
that topologies described with -smp include all possible cpus,
i.e. (sockets * cores * threads) == maxcpus or QEMU will
exit with error.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911133202.938754-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some machines don't have much differences a part from the flash model
being used. Introduce new machine properties to change them from the
command line.
For instance, to start the ast2500-evb machine with a different FMC
chip and a 64M SPI chip, use :
-M ast2500-evb,fmc-model=mx25l25635e,spi-model=mx66u51235f
Cc: 郁雷 <yulei.sh@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Message-Id: <20200915054859.2338477-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the docs folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-4-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing.
Backslash-escapes may be necessary to prevent unintended parsing".
The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong
lines on my system. A stand-alone backslash at EOL serves as line
continuation in a "parsed-literal" block. Therefore, escape the
backslashes that we want to appear as such in the formatted documentation.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908172111.19072-1-lersek@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Deprecate our lm32 target support. Michael Walle (former lm32 maintainer)
suggested that we do this in 2019:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg605024.html
because the only public user of the architecture is the many-years-dead
milkymist project. (The Linux port to lm32 was never merged upstream.)
In commit 4b4d96c776 (March 2020) we marked it as 'orphan' in
the MAINTAINERS file, but didn't officially deprecate it. Mark it
deprecated now, with the intention of removing it from QEMU in
mid-2021 before the 6.1 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 20200827113259.25064-1-peter.maydell@linaro.org
Deprecate our Unicore32 target support:
* the Linux kernel dropped support for unicore32 in commit
05119217a9bd199c for its 5.9 release (with rationale in the
cover letter: https://lkml.org/lkml/2020/8/3/232 )
* there is apparently no upstream toolchain that can create unicore32
binaries
* the maintainer doesn't seem to have made any contributions to
QEMU since the port first landed in 2012
* nobody else seems to have made changes to the unicore code except
for generic cleanups either
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20200825172719.19422-1-peter.maydell@linaro.org
Make the list of MPS2 boards consistent in the phrasing of each
entry, use the correct casing of "Arm", and move the mps2-an511
entry so the list is in numeric order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903202048.15370-4-peter.maydell@linaro.org
Implement a model of the MPS2 with the AN500 firmware. This is
similar to the AN385, with the following differences:
* Cortex-M7 CPU
* PSRAM is at 0x6000_0000
* Ethernet is at 0xa000_0000
* No zbt_boot_ctrl remapping of the low 16K
(but QEMU doesn't implement this anyway)
* no "block RAM" at 0x01000000
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903202048.15370-3-peter.maydell@linaro.org
Implement a model of the MPS2 with the AN386 firmware. This is
essentially identical to the AN385 firmware, but it has a
Cortex-M4 rather than a Cortex-M3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903202048.15370-2-peter.maydell@linaro.org
We deprecated the support for KVM on 32-bit Arm hosts in time
for release 5.0, which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note: the Linux
kernel dropped support for 32-bit Arm KVM hosts in 5.7.
Running 32-bit guests on a 64-bit Arm host remains supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200904154156.31943-2-peter.maydell@linaro.org
It's buggy and we are not sure anyone uses it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200909112742.25730-6-alex.bennee@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200827173051.31050-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The examples look nicer when using "::" code blocks.
Also mention that "-d in_asm" only outputs instructions that have not
been translated by the JIT layer yet.
And while we're at it, also add the AVR doc file to the MAINTAINERS file.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20200812155304.18016-1-huth@tuxfamily.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Booting on s390x is a little bit different compared to other architectures.
Let's add some information for people who are not yet used to this.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200806150507.12073-1-thuth@redhat.com>
[CH: minor wording tweaks]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Document the Xilinx Versal Virt board.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200803164749.301971-2-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 6a0b7505f1 which added documentation of the virt board
crossed in the post with commit 6f4e1405b9 which added a new
'mte' machine option. Update the docs to include the new option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Document the arm 'virt' board, which has been undocumented
for far too long given that it is the main recommended board
type for arm guests.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-5-peter.maydell@linaro.org
Add skeletal documentation of the gumstix boards
('connex' and 'verdex').
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-4-peter.maydell@linaro.org
Add skeletal documentation of the collie board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-3-peter.maydell@linaro.org
Add skeletal documentation of the canon-a1100 board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-2-peter.maydell@linaro.org
The vxhs code doesn't compile since v2.12.0. There's no point in fixing
and then adding CI for a config that our users have demonstrated that
they do not use; better to just remove it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200711065926.2204721-1-marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix the type name in the mdevctl example.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20200716145031.771476-1-cohuck@redhat.com>
By using invalidated address, guest can do out-of-bounds accesses.
These patches fix the issue by only allowing SD card image sizes
power of 2, and not switching to SEND_DATA state when the address
is invalid (out of range).
This issue was found using QEMU fuzzing mode (using --enable-fuzzing,
see docs/devel/fuzzing.txt) and reported by Alexander Bulekov.
Reproducer:
https://bugs.launchpad.net/qemu/+bug/1880822/comments/1
CI jobs results:
. https://cirrus-ci.com/build/5157142548185088
. https://gitlab.com/philmd/qemu/-/pipelines/166381731
. https://travis-ci.org/github/philmd/qemu/builds/707956535
-----BEGIN PGP SIGNATURE-----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=VZsF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sdcard-CVE-2020-13253-pull-request' into staging
Fix CVE-2020-13253
By using invalidated address, guest can do out-of-bounds accesses.
These patches fix the issue by only allowing SD card image sizes
power of 2, and not switching to SEND_DATA state when the address
is invalid (out of range).
This issue was found using QEMU fuzzing mode (using --enable-fuzzing,
see docs/devel/fuzzing.txt) and reported by Alexander Bulekov.
Reproducer:
https://bugs.launchpad.net/qemu/+bug/1880822/comments/1
CI jobs results:
. https://cirrus-ci.com/build/5157142548185088
. https://gitlab.com/philmd/qemu/-/pipelines/166381731
. https://travis-ci.org/github/philmd/qemu/builds/707956535
# gpg: Signature made Tue 14 Jul 2020 14:54:44 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/sdcard-CVE-2020-13253-pull-request:
hw/sd/sdcard: Do not switch to ReceivingData if address is invalid
hw/sd/sdcard: Update coding style to make checkpatch.pl happy
hw/sd/sdcard: Do not allow invalid SD card sizes
hw/sd/sdcard: Simplify realize() a bit
hw/sd/sdcard: Restrict Class 6 commands to SCSD cards
tests/acceptance/boot_linux: Expand SD card image to power of 2
tests/acceptance/boot_linux: Tag tests using a SD card with 'device:sd'
docs/orangepi: Add instructions for resizing SD image to power of two
MAINTAINERS: Cc qemu-block mailing list
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
