Starting from audio_driver_init, propagate errors via Error ** so that
audio_init_audiodevs can simply pass &error_fatal, and AUD_register_card
can signal faiure.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
[Reworked the audio/audio.c parts, while keeping Martin's hw/ changes. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There was no way to set this and we need that for it to be able to properly
initialise.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Message-ID: <16963256573fcbfa7720aa2fd000ba74a4055222.1650874791.git.mkletzan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the backend sends VHOST_USER_GPU_DMABUF_SCANOUT2, handle it
by getting the modifiers information which is now available.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20230714153900.475857-4-ernunes@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230823065335.1919380-15-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Calling OpenGL from different threads can have bad consequences if not
carefully reviewed. It's not generally supported. In my case, I was
debugging a crash in glDeleteTextures from OPENGL32.DLL, where I asked
qemu for gl=es, and thus ANGLE implementation was expected. libepoxy did
resolution of the global pointer for glGenTexture to the GLES version
from the main thread. But it resolved glDeleteTextures to the GL
version, because it was done from a different thread without correct
context. Oops.
Let's stick to the main thread for GL calls by using a BH.
Note: I didn't use atomics for reset_finished check, assuming the BQL
will provide enough of sync, but I might be wrong.
Acked-by: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230726173929.690601-3-marcandre.lureau@redhat.com>
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht'
and 'backing_height' as these commonly indicate the size of the
whole surface (e.g. guest's Xorg extended display). Then use
'width' and 'height' for sub region in there (e.g. guest's
scanouts).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
The primary guest scanout shows the booting screen right after reboot
but additional guest displays (i.e. max_ouptuts > 1) will keep displaying
the old frames until the guest virtio gpu driver gets initialized, which
could cause some confusion. A better way is to to replace the surface with
a place holder that tells the display is not active during the reset of
virtio-gpu device.
And to immediately update the surface with the place holder image after
the switch, displaychangelistener_gfx_switch needs to be called with
'update == TRUE' in dpy_gfx_replace_surface when the new surface is NULL.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230627224451.11739-1-dongwon.kim@intel.com>
Commit 9462ff4695 ("virtio-gpu/win32: allocate shareable 2d
resources/images") introduces a division, which can lead to crashes when
"height" is 0.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1744
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Fixes: 544f0278af (virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement the frontend side of the get_edid feature in the qemu
vhost-user-gpu frontend device.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230626164708.1163239-5-ernunes@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This functionality can be shared with upcoming use in vhost-user-gpu, so
move it to the shared file to avoid duplicating it.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230626164708.1163239-2-ernunes@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable D3D texture sharing when possible, and pass it to the texture
display callbacks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-21-marcandre.lureau@redhat.com>
The following patch will get the underlying D3D11 Texture2D from the
virgl renderer scanout. Pass it along to the texture scanout callbacks
as a priliminary step, to simplify review.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-20-marcandre.lureau@redhat.com>
virgl offers a few features that require to have access to the
underlying EGLDisplay. This is the case for the D3D texture sharing support.
The API callback is merged for virgl 1.0:
https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/1113
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-18-marcandre.lureau@redhat.com>
Allocate pixman bits for scanouts with qemu_win32_map_alloc() so we can
set a shareable handle on the associated display surface.
Note: when bits are provided to pixman_image_create_bits(), you must also give
the rowstride (the argument is ignored when bits is NULL)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-11-marcandre.lureau@redhat.com>
Respond with VIRTIO_GPU_RESP_ERR_OUT_OF_MEMORY if it fails to create
an udmabuf for the blob resource.
v2: consolidated return statments and removed an unnecessary style change
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230627003453.5321-1-dongwon.kim@intel.com>
There were often cases where a scanout blob sometimes has just 1 entry
that is linked to many pages in it. So just checking whether iov_cnt is 1
is not enough for screening small, non-scanout blobs. Therefore adding
iov_len check as well to make sure it creates an udmabuf only for a scanout
blob, which is at least bigger than one page size.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230621222704.29932-1-dongwon.kim@intel.com>
In the case where the console does not have gl capability, and
if blob is set to true, make sure that the display updates still
work. Commit e86a93f554 accidentally broke this by misplacing
the return statement (in resource_flush) causing the updates to
be silently ignored.
Fixes: e86a93f554 ("virtio-gpu: splitting one extended mode guest fb into n-scanouts")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230623060454.3749910-1-vivek.kasireddy@intel.com>
The following points sometimes can reduce much data
to copy:
1. When width matches, we can transfer data with one
call of iov_to_buf().
2. Only the required height need to transfer, not
whole image.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230612021358.25068-1-zhukeqian1@huawei.com>
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It looks like the virtio_gpu_load() does not compute and set the offset,
the same way virtio_gpu_set_scanout() does. This probably results in
incorrect display until the scanout/framebuffer is updated again, I
guess we should fix it, although I haven't checked this yet.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230515132518.1025853-1-marcandre.lureau@redhat.com>
As Coverity points out (CID 1508621) the calculation to increment i in
the fill fallback loop is ineffective as it is overwritten in next
statement. This was left there by mistake from a previous version but
is not needed in the current approach so remove the superfluous
increment statement.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405161234.6EF0A74633D@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This protects devices from bh->mmio reentrancy issues.
Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The target checks here are only during the initialization, so they
are not performance critical. We can switch these to runtime checks
to avoid that we have to compile this file multiple times during
the build, and make the code ready for an universal build one day.
Message-Id: <20230412163501.36770-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The naming is more conventional in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is phase 2, following on from the basic platform support which was
already merged.
• Add a simple single-tenant internal XenStore implementation
• Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table
• Provide emulated back ends for Xen operations
• Header cleanups to allow PV back ends to build without Xen itself
• Enable PV back ends in emulated mode
• Documentation update
Tested-by: Paul Durrant <paul@xen.org>
... on real Xen (master branch, 4.18) with a Debian guest.
-----BEGIN PGP SIGNATURE-----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=JGLX
-----END PGP SIGNATURE-----
Merge tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu into staging
Enable PV backends with Xen/KVM emulation
This is phase 2, following on from the basic platform support which was
already merged.
• Add a simple single-tenant internal XenStore implementation
• Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table
• Provide emulated back ends for Xen operations
• Header cleanups to allow PV back ends to build without Xen itself
• Enable PV back ends in emulated mode
• Documentation update
Tested-by: Paul Durrant <paul@xen.org>
... on real Xen (master branch, 4.18) with a Debian guest.
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCgAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmQHu3wSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVE5LYP/0VodDsQdP7Z4L+/IzgBSgEec7qmyQFB
# KlBZS/PmvCZKb0DHLI3GhXIyzD+/fnLtGSRl0rYObnKP7im+MpEDGmn97f6nIITk
# AzkdsVhNEBQFXCkLgQ9y8kTrTmsod9O4sqn0+naa2TX4FPcRN0MaNmpuLEubvaRS
# +JuyHmwy9ZeeAnsU31uJ0nx4F1hW9IDaatNoDeFcFnKCXQp36rtdZUViMowUJvwu
# Q+Xyg6dybusznaoiXd485tTPrTt+FK/wEARse3q2gRh9QblLu0r5BFb0rOfhYCTQ
# jw+5lBsOX+UlffmB9IDakRpVe4RKhvvRQSkRvYkPCshsqud9zMGhaquKg1vKBgca
# I31XSN0LCcon/ahHGtmVAxyZUpWdEnfzO1TbTNpz9oacROklgVgEYdw5Vwca71VD
# SURl6uCt9Jb9WmsR4twus4i4qDjQIDOtOF0hcxpl7HGktkxlGxUVI4qVLXARtVCS
# OTB6N0LlhJ2woj2wYK5BRTiOj03T2MkJEWaYhDdIrQREKWe2Sn4xTOH5kGbQQnOr
# km93odjBZFRHsAUnzXHXW3+yHjMefH7KrHePbmvsO4foGF77bBxosuC2ehFfvNJ0
# VM/H04NDtPYCBwdAr545PSN/q+WzEPQaquLZ0UuTBuPpMMOYd+Ff8YvQWJPyCM18
# 1mq9v6Xe9RQZ
# =JGLX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 22:32:28 GMT
# gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg: issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544
* tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu: (27 commits)
docs: Update Xen-on-KVM documentation for PV disk support
MAINTAINERS: Add entry for Xen on KVM emulation
i386/xen: Initialize Xen backends from pc_basic_device_init() for emulation
hw/xen: Implement soft reset for emulated gnttab
hw/xen: Map guest XENSTORE_PFN grant in emulated Xenstore
hw/xen: Add emulated implementation of XenStore operations
hw/xen: Add emulated implementation of grant table operations
hw/xen: Hook up emulated implementation for event channel operations
hw/xen: Only advertise ring-page-order for xen-block if gnttab supports it
hw/xen: Avoid crash when backend watch fires too early
hw/xen: Build PV backend drivers for CONFIG_XEN_BUS
hw/xen: Rename xen_common.h to xen_native.h
hw/xen: Use XEN_PAGE_SIZE in PV backend drivers
hw/xen: Move xenstore_store_pv_console_info to xen_console.c
hw/xen: Add xenstore operations to allow redirection to internal emulation
hw/xen: Add foreignmem operations to allow redirection to internal emulation
hw/xen: Pass grant ref to gnttab unmap operation
hw/xen: Add gnttab operations to allow redirection to internal emulation
hw/xen: Add evtchn operations to allow redirection to internal emulation
hw/xen: Create initial XenStore nodes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a property to allow disabling pixman and always use the fallbacks
for different operations which is useful for testing different drawing
methods or debugging pixman related issues.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <61768ffaefa71b65a657d1365823bd43c7ee9354.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that we have the redirectable Xen backend operations we can build the
PV backends even without the Xen libraries.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
XC_PAGE_SIZE comes from the actual Xen libraries, while XEN_PAGE_SIZE is
provided by QEMU itself in xen_backend_ops.h. For backends which may be
built for emulation mode, use the latter.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Pixman may return false if it does not have a suitable implementation.
Add fallbacks to handle such cases.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reported-by: Rene Engel <ReneEngel80@emailn.de>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <20ed9442a0146238254ccc340c0d1efa226c6356.1677445307.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add simple implementation for two raster operations that are used by
AmigaOS which fixes graphics problems in some programs using these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reported-by: Rene Engel <ReneEngel80@emailn.de>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <17ef3c59dc7868f75034e9ebe21e2999c8f718d4.1677445307.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
No need to use an intermediate 'dma-offset' property in the
chipset object. Alias the property, so when the machine (here
r2d-plus) sets the value on the chipset, it is propagated to
the OHCI object.
Note we can rename the chipset 'base' property as 'dma-offset'
since the object is a non-user-creatable sysbus type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230203145536.17585-12-philmd@linaro.org>
Include it in the .c files instead that use the error reporting
functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
This is not needed in C.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <58f599387dd0739ea1880bfb678872c0be26bf1b.1674333199.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No need to wrap constants in parenthesis.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <9194546b73b05e7098761ec62b2dfd0699b97b65.1674333199.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
-----BEGIN PGP SIGNATURE-----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=7OEC
-----END PGP SIGNATURE-----
Merge tag 'pull-monitor-2023-01-19' of https://repo.or.cz/qemu/armbru into staging
Monitor patches for 2023-01-19
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPJO+8SHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTbBwP/RsZLLDCz6moSet4Hly+vPTWibyYYDkS
# uk6a70Ja7fsAcONumBaXdpoinPtbED662eYxidbLFr//tAjnKu57jnwAIFTTOKJc
# sCVtdgOlbNSZFrqyIr8ctY6yKJLLBaa02in/BczFIQphPatpUwvxrvrdgxc58NNK
# qaeKDnWKXvZ6EUaYPpruxqE5J/NV0ykyab9Rc8rNJqdUMnqbd662zHcA0l31misH
# gAfKBhReo53XUbfvoFS9kaoBQaTJPk4CcKHaT7NJXR8ezlIEQVLtFzdfAf04kSdG
# 8VRwwx5NDpmafATEaMXJhJ74Fyc8biDWXoQ6aA1jdUCu39B2EPl1H1qlCG9ZYp7w
# CkbJU6UwtOYsG11NU8Mr1u9rMlAgAVkkLsMYiiI4cpLBkI0vkoV66ms3oZgYUtbq
# /TgCpfjKpE87ZBLIwJjGsg+TMN2AH5lpt/49HV8QEFA8mI7h29oo2HvheXE7PPzH
# b9iIe9ADrKwB5DpJW2vigPj+fSHqoSGd3R/hUcMVOubKnJme97mys2hD+sfxga/H
# qfKLzgTqQI2dGhfow/8wzfYdfYmkii+ggDyzcxLAxx2ITO/fLWJygmTgXJmA3dl6
# pnpZvhOu4dEgK4VstugXcvgCVHUVXd9wqI9wxJAc+mKanTmZIJBnxCm/QVG2/w/d
# 5IgmP9Se7vb0
# =7OEC
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Jan 2023 12:47:43 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-monitor-2023-01-19' of https://repo.or.cz/qemu/armbru:
ui: Simplify control flow in qemu_mouse_set()
ui: Split hmp_mouse_set() and move the HMP part to ui/
ui: Don't check for mode change after mouse_set error
ui: Reduce nesting in hmp_change_vnc() slightly
ui: Factor out hmp_change_vnc(), and move to ui/ui-hmp-cmds.c
ui: Improve "change vnc" error reporting
ui: Move HMP commands from monitor to new ui/ui-hmp-cmds.c
ui: Factor out qmp_add_client() parts and move to ui/ui-qmp-cmds.c
ui: Move QMP commands from monitor to new ui/ui-qmp-cmds.c
ui: Clean up a few things checkpatch.pl would flag later on
ui/spice: Give hmp_info_spice()'s channel_names[] static linkage
ui/spice: QXLInterface method set_mm_time() is now dead, drop
ui/spice: Require spice-server >= 0.14.0
Revert "hmp: info spice: take out webdav"
ui/spice: Require spice-protocol >= 0.14.0
ui: Fix silent truncation of numeric keys in HMP sendkey
ui: Check numeric part of expire_password argument @time properly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SPICE_NEEDS_SET_MM_TIME is now always off. Bury the dead code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230109190321.1056914-7-armbru@redhat.com>
Version 0.14.0 is now old enough to have made it into the major
distributions:
Debian 11: 0.14.3
RHEL-8: 0.14.3
FreeBSD (ports): 0.15.0
Fedora 35: 0.15.0
Ubuntu 20.04: 0.14.2
OpenSUSE Leap 15.3: 0.14.3
Requiring it lets us drop a number of version checks. The next commit
will clean up some more.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230109190321.1056914-6-armbru@redhat.com>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
