We have several almost identical copies of a blockdev_create() function
in different test cases. Time to create one unified function in
iotests.py.
To keep the diff managable, this patch only creates the function and
follow-up patches will convert the individual test cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no $SOCKDIR, only $SOCK_DIR.
Fixes: f3923a72f1
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Doing this allows running this test with e.g. -o compat=0.10 or
-o compat=refcount_bits=1.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 051 should be skipped if nbd is not available, and 267 should
be skipped if copy-on-read is not enabled.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We were only doing this if docker was enabled which isn't quite right.
Fixes: fc76c56d3f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191211170520.7747-17-alex.bennee@linaro.org>
We are using tap-driver.pl, do not require anymore gtester to be installed
to run the testsuite in docker-based tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1576632611-55032-1-git-send-email-pbonzini@redhat.com>
One test ensures that the logfile handle is still valid even if
the logfile is changed during logging.
The other test validates that the logfile handle remains valid under
the logfile lock even if the logfile is closed.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-7-robert.foley@linaro.org>
test-util-filemonitor fails in restricted non-x86 Travis containers
since they apparently blacklisted some required system calls there.
Let's simply skip the test if we detect such an environment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191204154618.23560-6-thuth@redhat.com>
In certain environments like restricted containers, we can not create
huge test images. To be able to use "make check" in such container
environments, too, let's skip the hd-geo-test instead of failing when
the test images could not be created.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191204154618.23560-5-thuth@redhat.com>
Test 079 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. Test 079 tries to
create a 4G sparse file, which is apparently already too big for these
containers, so check first whether we can really create such files before
executing the test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-4-thuth@redhat.com>
Test 060 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. The repair process
in test 060 creates a file of 64 GiB, so test first whether such large
files are possible and skip the test if that's not the case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Some tests create huge (but sparse) files, and to be able to run those
tests in certain limited environments (like CI containers), we have to
check for the possibility to create such files first. Thus let's introduce
a common function to check for large files, and replace the already
existing checks in the iotests 005 and 220 with this function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By default VM build test use qemu-img from system's PATH to
create the image disk. Due the lack of qemu-img on the system
or the desire to simply use a version built with QEMU, it would
be nice to allow one to set its path. So this patch makes that
possible by reading the path to qemu-img from QEMU_IMG if set,
otherwise it fallback to default behavior.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191114134246.12073-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
There are currently two bugs in s390x_code[]: First, the initial jump
uses the wrong offset, so it was jumping to 0x10014 instead of 0x10010.
Second, LHI only loads the lower 32-bit of the register.
Everything worked fine as long as the s390-ccw bios code was jumping
here with r3 containing zeroes in the uppermost 48 bit - which just
happened to be the case so far by accident. But we can not rely on this
fact, and indeed one of the recent suggested patches to jump2ipl.c cause
the newer GCCs to put different values into r3. In that case the code
from s390x_code[] crashes very ungracefully.
Thus let's make sure to jump to the right instruction, and use LGHI
instead of LHI to make sure that we always zero out the upper bits
of the register.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191217150642.27946-1-thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
test_keyval_visit_size() should test for trailing crap after size with
and without suffix. It does test the latter: "sz2=16Gi" has size
"16G" followed by crap "i". It fails to test the former "sz1=16E" is
a syntactically valid size that overflows uint64_t. Replace by
"sz1=0Z".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191125133846.27790-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Automatically complete jobs that have a 'ready' state and need an
explicit job-complete. Without this, run_job() would hang for such
jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
run_job() accepts a wait parameter for a timeout, but it doesn't
actually use it. The only thing that is missing is passing it to
events_wait(), so do that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a function that runs qemu-io and logs the output with the
appropriate filters applied.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The error message for a negative speed uses QERR_INVALID_PARAMETER,
which implies that the 'speed' option doesn't even exist:
{"error": {"class": "GenericError", "desc": "Invalid parameter 'speed'"}}
Make it use QERR_INVALID_PARAMETER_VALUE instead:
{"error": {"class": "GenericError", "desc": "Parameter 'speed' expects a non-negative value"}}
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If both the create options (qemu-img create -o ...) and the size
parameter were given, the size parameter was silently ignored. Instead,
make specifying two sizes an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Only apply --image-opts to the topmost image when listing an entire
backing chain. It is incorrect to treat backing filenames as image
options. Assuming we have the backing chain t.IMGFMT.base <-
t.IMGFMT.mid <- t.IMGFMT, qemu-img info fails as follows:
$ qemu-img info --backing-chain --image-opts \
driver=qcow2,file.driver=file,file.filename=t.IMGFMT
qemu-img: Could not open 'TEST_DIR/t.IMGFMT.mid': Cannot find device=TEST_DIR/t.IMGFMT.mid nor node_name=TEST_DIR/t.IMGFMT.mid
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 079 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. Test 079 tries to
create a 4G sparse file, which is apparently already too big for these
containers, so check first whether we can really create such files before
executing the test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 060 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. The repair process
in test 060 creates a file of 64 GiB, so test first whether such large
files are possible and skip the test if that's not the case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some tests create huge (but sparse) files, and to be able to run those
tests in certain limited environments (like CI containers), we have to
check for the possibility to create such files first. Thus let's introduce
a common function to check for large files, and replace the already
existing checks in the iotests 005 and 220 with this function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191204093625.14836-19-armbru@redhat.com>
Local Error * variables are conventionally named @err or @local_err,
and Error ** parameters @errp. Naming local variables like parameters
is confusing. Clean that up.
Naming parameters like local variables is also confusing. Left for
another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204093625.14836-17-armbru@redhat.com>
Declaring a local Error *err without initializer looks suspicious.
Fuse the declaration with the initialization to avoid that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
These machines can't be used reliably for migration anymore, quoting
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg04516.html :
"
due to the introduction of the memory API, the firmware is not
migrated correctly from source to destination. On QEMU <1.3 the
0xf0000-0xfffff area is basically a copy of the higher
0xffff0000-0xffffffff area, while on more recent versions it is
initialized with zeroes and the firmware copies from 0xffff0000 to
0xf0000. When you migrate from old to new QEMU, after reboot there's
nothing at 0xf0000 and bugs ensue.
"
The pc-0.x machines have been marked as deprecated since QEMU v4.0, so
it is time to remove them now.
And while we're at it, mark the remaining pc-1.x machine types
as deprecated now, too, so that we finally only have "pc-i440fx"
and "pc-q35" machine types left (apart from the non-versioned
"isapc" and "microvm") once we remove them in a couple of releases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209125248.5849-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The block tests, as well as ahci-test needs qemu-img. Do not run
them if it wasn't built.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "accel" property from MachineState, and instead desugar
"-machine accel=" to a list of "-accel" options.
This has a semantic change due to removing merge_lists from -accel.
For example:
- "-accel kvm -accel tcg" all but ignored "-accel kvm". This is a bugfix.
- "-accel kvm -accel thread=single" ignored "thread=single", since it
applied the option to KVM. Now it fails due to not specifying the
accelerator on "-accel thread=single".
- "-accel tcg -accel thread=single" chose single-threaded TCG, while now
it will fail due to not specifying the accelerator on "-accel
thread=single".
Also, "-machine accel" and "-accel" become incompatible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has two bools and two strings, it is very difficult to remember
which does what. And it makes very difficult to add new parameters as
we need to modify all the callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390x
Tested-by: Laurent Vivier <lvivier@redhat.com>
This explains better what they do and avoid confussino with
command_src/target.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390x
Tested-by: Laurent Vivier <lvivier@redhat.com>
We are repeating almost everything for each machine while creating the
command line for migration. And once for source and another for
destination. We start putting there opts_src and opts_dst.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390x
Tested-by: Laurent Vivier <lvivier@redhat.com>
-----BEGIN PGP SIGNATURE-----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=4LJa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue 2019-12-17
# gpg: Signature made Tue 17 Dec 2019 05:12:43 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
python/qemu: Remove unneeded imports in __init__
python/qemu: accel: Add tcg_available() method
python/qemu: accel: Strengthen kvm_available() checks
python/qemu: accel: Add list_accel() method
python/qemu: Move kvm_available() to its own module
Acceptance tests: use relative location for tests
Acceptance tests: use avocado tags for machine type
Acceptance tests: introduce utility method for tags unique vals
Acceptance test x86_cpu_model_versions: use default vm
tests/acceptance: Makes linux_initrd and empty_cpu_model use QEMUMachine
python/qemu: Add set_qmp_monitor() to QEMUMachine
analyze-migration.py: replace numpy with python 3.2
analyze-migration.py: fix find() type error
Revert "Acceptance test: cancel test if m68k kernel packages goes missing"
tests/boot_linux_console: Fetch assets from Debian snapshot archives
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_test_rand_int provides a reproducible random integer number, using a
different number seed every time but allowing reproduction using the
--seed command line option. It is thus better suited to tests than
g_random_int or random.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576113478-42926-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The check-report.html and check-report.xml targets were replaced
with check-report.tap in commit 9df43317b8 but the check-help
text was not updated so it still lists check-report.html.
Fixes: 9df43317b8
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191211204427.4681-2-wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We have a setenv() wrapper in os-win32.c that no one is actually using.
Drop it and change to g_setenv() uniformly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576074210-52834-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On ppc64, migration-test only works with kvm_hv, and we already
have a check to verify the module is loaded.
kvm_hv module can be loaded in memory and /sys/module/kvm_hv exists,
but on some systems (like build systems) /dev/kvm can be missing
(by administrators choice).
And as kvm_hv exists test-migration is started but QEMU falls back to
TCG because it cannot be used:
Could not access KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory
Back to tcg accelerator
And as the test is done with TCG, it fails.
As for s390x, we must check for the existence and the access rights
of /dev/kvm.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191120170955.242900-1-lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
./configure --enable-sdl --audio-drv-list=sdl --enable-modules
Will generate two identical test names: /$arch/module/load/sdl
Which generates an error like:
(tests/modules-test:23814): GLib-ERROR **: 18:23:06.359: duplicate test case path: /aarch64//module/load/sdl
Add the subsystem prefix in the name as well, so instead we get:
/$arch/module/load/audio-sdl
/$arch/module/load/ui-sdl
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <d64c9aa098cc6e5c0b638438c4959eddfa7e24e2.1573679311.git.crobinso@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the bluetooth code has been removed, we don't need to test
with this library anymore.
Message-Id: <20191120091014.16883-5-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This creates the 'accel' Python module to be the home for
utilities that deal with accelerators. Also moved kvm_available()
from __init__.py to this new module.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216191438.93418-2-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
An Avocado Test ID[1] is composed by a number of components, but it
starts with the Test Name, usually a file system location that was
given to the loader.
Because the source directory is being given as a prefix to the
"tests/acceptance" directory containing the acceptance tests, the test
names will needlessly include the directory the user is using to host
the QEMU sources (and/or build tree).
Let's remove the source dir (or a build dir) from the path given to
the test loader. This should give more constant names, and when using
result servers and databases, it should give the same test names
across executions from different people or from different directories.
[1] - https://avocado-framework.readthedocs.io/en/69.0/ReferenceGuide.html#test-id
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-5-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The same way the arch tag is being used as a fallback for the arch
parameter, let's do the same for QEMU's machine and avoid some boiler
plate code.
This is now possible because, since Avocado 72.0, it's possible to use
tags with names that match the machine types on QEMU.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Currently a test can describe the target architecture binary that it
should primarily be run with, be setting a single tag value.
The same approach is expected to be done with other QEMU aspects to be
tested, for instance, the machine type and accelerator, so let's
generalize the logic into a utility method.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190924194501.9303-3-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The default vm provided by the test, available as self.vm, serves the
same purpose of the one obtained by self.get_vm(), but saves a line
and matches the style of other tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190924194501.9303-2-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
On linux_initrd and empty_cpu_model tests the same effect of
calling QEMU through run() to inspect the terminated process is
achieved with a sequence of set_qmp_monitor() / launch() / wait()
commands on an QEMUMachine object. This patch changes those
tests to use QEMUMachine instead, so they follow the same pattern
to launch QEMU found on other acceptance tests.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191211185536.16962-3-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Now than we use the stable snapshot archive, we can remove this check.
This reverts commit d2499aca4b.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191126223810.20180-3-philmd@redhat.com>
Tested-by: Willian Rampazzo <wrampazz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The kernel packaged was fetched from an unstable repository.
Use the stable snapshot archive instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191126223810.20180-2-philmd@redhat.com>
Tested-by: Willian Rampazzo <wrampazz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The script checkpatch.pl located in scripts folder was
used to detect all errors and warrnings in files:
hw/mips/mips_malta.c
hw/mips/gt64xxx_pci.c
tests/acceptance/linux_ssh_mips_malta.py
All these mips malta machine files were edited and
all the errors and warrings generated by the checkpatch.pl
script were corrected and then the script was
ran again to make sure there are no more errors and warnings.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1575640687-20744-3-git-send-email-Filip.Bozuta@rt-rk.com>
After the introduction of generic PCIe root port and PCIe-PCI bridge,
we will also have SHPC controller on ARM, so just enable SHPC native
hot plug.
Also update tests/data/acpi/virt/DSDT* to pass "make check".
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-id: 20191209063719.23086-3-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The last argument of AML bit and/or statement is the target variable,
so we don't need to use a NULL target and then an additional store
operation; using just aml_and() or aml_or() statement is enough.
Also update tests/data/acpi/virt/DSDT* to pass "make check".
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-id: 20191209063719.23086-2-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libcap was dropped from virtio-9p (commit 7e46261368), so remove it from
the dockerfiles as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
[groug, mention SHA1 that dropped libcap]
Signed-off-by: Greg Kurz <groug@kaod.org>
Add optional pre-shutdown: shutdown/launch vm before migration. This
leads to storing persistent bitmap to the storage, which breaks
migration with dirty-bitmaps capability enabled and shared storage
until fixed by previous commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191125125229.13531-3-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The current image is broken while running qtests but the bug go away
when built with a newer Ubuntu i386 image. I was unable to replicate
the crash on Debian Buster for i386 either so I'm concluding it is a
distro problem. Let's paper over that crack by updating our 32 bir
test image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The iotests in particular don't like the output being spammed with
warnings about locales.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
To be able to run the docker tests centos has here we have to install
python3 as well as the basic tools.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 29cb418749 ("spapr: Set VSMT to smp_threads by default")
has introduced a new default value for VSMT that is not supported
by old kernels (before 4.13 kernel) and this breaks "make check"
on these kernels.
To fix that, explicitly set in the involved tests the value that was
used as the default value before the change.
Cc: Greg Kurz <groug@kaod.org>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191120142539.236279-1-lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- tweak DEBUG behaviour for vm-test-build
- rename and update plug docs for versioning
- slim down MAIN_SOFTMMU_TARGETS
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl3VG9cACgkQ+9DbCVqe
KkQvaAgAgfum+j9VZrgAakBKzmBuWV5IH5vJ+w9rzCP9/Y8XtQ7wd1le4jY0XtEb
6azCR0Fk4QivuXaH+YA3M6iV3Om5m5Tl6dIYsDt0Qk6jCkZE/Kfi/7jEQaPnVH0V
FQzSvXOtbMipBNBYp/WzMqNAdbIB3hI/oBXcxFqNiKrTsLylywSKCJCbHrJDNtCh
q0hHvqPVrCTXCSav16NqbxqibRn+gSkYFeAAE2LjaX9yVpa2bGMmjvQEJCeEBMxQ
76KzcLyKHhvl9NJWjd7UYaVLyXgGnOLtp3KjFaSM4+BU8CS/nY6h7Oiymyf8vShV
Bmx/Ju/m0J/H8RHfRdZcE0YGYuEmKA==
=EMcr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-rc3-testing-and-tcg-201119-1' into staging
A few test and doc fixes:
- tweak DEBUG behaviour for vm-test-build
- rename and update plug docs for versioning
- slim down MAIN_SOFTMMU_TARGETS
# gpg: Signature made Wed 20 Nov 2019 10:56:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-rc3-testing-and-tcg-201119-1:
tests/tcg: modify multiarch tests to work with clang
.travis.yml: drop 32 bit systems from MAIN_SOFTMMU_TARGETS
docs/devel: update tcg-plugins.rst with API versioning details
docs/devel: rename plugins.rst to tcg-plugins.rst
tests/vm: make --interactive (and therefore DEBUG=1) unconditional
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the concept of only dropping to ssh if a test fails is nice it
is more useful for this to be unconditional. You usually just want to
get the build up and running and then noodle around debugging or
attempting to replicate.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
If IASL wasn't able to parse expected file, test will just
print warning
"Warning! iasl couldn't parse the expected aml\n"
and remove temporary table dumped from guest.
Typically expected tables are always valid, with an exception
when patchset introduces new tables.
Make sure dumped tables are retained even if expected files
are not valid, so one could have a chance to manualy check new
tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1574240560-12538-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's an old compatibility shim that just delegates to scsi-cd or scsi-hd.
Just like ide-drive, we don't need this.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run the core of the test twice, once without iothreads, and again
with, for more coverage of both setups.
Suggested-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20191114213415.23499-5-eblake@redhat.com>
We generally include relevant HMP input in .out files, by virtue of
the fact that HMP echoes its input. But QMP does not, so we have to
explicitly inject it in the output stream (appropriately filtered to
keep the tests passing), in order to make it easier to read .out files
to see what behavior is being tested (especially true where the output
file is a sequence of {'return': {}}).
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114213415.23499-4-eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Up to now, all it took to cause a lot of iotest failures was to have a
background process such as 'nbdkit -p 10810 null' running, because we
hard-coded the TCP port. Switching to a Unix socket eliminates this
contention. We still have TCP coverage in test 233, and that test is
more careful to not pick a hard-coded port.
Add a comment explaining where the format layer applies when using
NBD as protocol (until NBD gains support for a resize extension, we
only pipe raw bytes over the wire).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114213415.23499-3-eblake@redhat.com>
[eblake: Tweak socket name per Max Reitz' review]
This test has been broken since 3.0. It used TEST_IMG to influence
the name of a file created during _make_test_img, but commit 655ae6bb
changed things so that the wrong file name is being created, which
then caused _launch_qemu to fail. In the meantime, the set of events
issued for the actions of the test has increased.
Why haven't we noticed the failure? Because the test rarely gets run:
'./check -qcow2 173' is insufficient (that defaults to using file protocol)
'./check -nfs 173' is insufficient (that defaults to using raw format)
so the test is only run with:
./check -qcow2 -nfs 173
Note that we already have a number of other problems with -nfs:
./check -nfs (fails 18/30)
./check -qcow2 -nfs (fails 45/76 after this patch, if exports does
not permit 'insecure')
and it's not on my priority list to fix those. Rather, I found this
because of my next patch's work on tests using _send_qemu_cmd.
Fixes: 655ae6b
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20191114213415.23499-2-eblake@redhat.com>
The test for an NBD client. The NBD server is disconnected after the
client write request. The NBD client should reconnect and complete
the write operation.
Suggested-by: Denis V. Lunev <den@openvz.org>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-Id: <1573529976-815699-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Test that doing a second blockdev-snapshot doesn't make the first
overlay's backing file go away.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The variable for error messages to be displayed is $results, not
$reason. Fix 'check' to print the "no qualified output" error message
again instead of having a failure without any message telling the user
why it failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
From the two values compared, make it obvious which is found at path, and
which is expected.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a very simple versioning API which allows the plugin
infrastructure to check the API a plugin was built against. We also
expose a min/cur API version to the plugin via the info block in case
it wants to avoid using old deprecated APIs in the future.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
The NetBSD project uses SHA512 for its checksums so lets support that
in the download helper.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This test has been unstable on NetBSD for awhile. It seems the
mechanism used to listen to a random port is a Linux-ism (although a
received wisdom Linux-ism rather than a well documented one). As
working around would add more hard to test complexity to the test I've
gone for the easier option of making it CONFIG_LINUX only.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Kamil Rytarowski <kamil@netbsd.org>
Use new helper to read all pending console output,
not just a single char. Unblocks installer boot.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20191031085306.28888-4-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Helper function to read all console output.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20191031085306.28888-3-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Instead of fetching the prebuilt image from patchew download the install
iso and prepare the image locally. Install to disk, using the serial
console. Create qemu user, configure ssh login. Install packages
needed for qemu builds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Tested-by: Thomas Huth <thuth@redhat.com>
[ehabkost: rebased to latest qemu.git master]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20191031085306.28888-2-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We're seeing occasional asserts in 'wait_for_migraiton_fail', that
I can't reliably reproduce, and where the cores don't have any useful
state. Print the 'status' out, so we can see which unexpected state
we're ending up in.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191108104307.125020-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test what qemu-img check says about an image after one has written
compressed data to an offset above 4 GB.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191028161841.1198-3-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
but they are a step in the good direction.
Fix Netlink support.
Trivial fix for alpha
PULL v2: fix checkpatch warnings
-----BEGIN PGP SIGNATURE-----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=btyq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-4.2-pull-request' into staging
sparc/sparc64 fixes: this doesn't fix debian chroot for me
but they are a step in the good direction.
Fix Netlink support.
Trivial fix for alpha
PULL v2: fix checkpatch warnings
# gpg: Signature made Wed 06 Nov 2019 13:04:36 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-4.2-pull-request:
linux-user/alpha: Set r20 secondary return value
linux-user/sparc: Fix cpu_clone_regs_*
linux-user: Introduce cpu_clone_regs_parent
linux-user: Rename cpu_clone_regs to cpu_clone_regs_child
linux-user/sparc64: Fix target_signal_frame
linux-user/sparc: Fix WREG usage in setup_frame
linux-user/sparc: Use WREG_SP constant in sparc/signal.c
linux-user/sparc: Begin using WREG constants in sparc/signal.c
linux-user/sparc: Use WREG constants in sparc/target_cpu.h
target/sparc: Define an enumeration for accessing env->regwptr
tests/tcg/multiarch/linux-test: Fix error check for shmat
scripts/qemu-binfmt-conf: Update for sparc64
linux-user: Support for NETLINK socket options
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's get the image fuzzer Python 3 changes merged in QEMU 4.2.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl3BmJQACgkQnKSrs4Gr
c8i3JwgAkTUM4b9O1irKMTHaeO3kmKmU4g920fRTXXjJXhA6i7IYDz6iYEQoNJoR
RsyaFRKfBqdmzRmk5qmehBax1XIcI4IZVWeiyk2SqjuM3T8d/VOln/iHLyzIz48j
zLP2AoEPiiWu+DODqz1SqOwYaUdw7bdEky/Nh0WbCRZdhS31m8D/svCIxtzoLhXk
OcWcTdeqXMG+EFSYvk3LFHJajbTOV4SMK6p+jXmdwVmV3rT7sIB4cS3s8oXC3zpM
bM3/Br/mRLJjnbF2FgQLCWwdV8NpvX7jk1ryoiySi5itPQil0PurAHwauPksUveo
Kf3LlcuaSRwKT8eG5745hyC2qBzEAg==
=7PkU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
Let's get the image fuzzer Python 3 changes merged in QEMU 4.2.
# gpg: Signature made Tue 05 Nov 2019 15:43:16 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
image-fuzzer: Use OSerror.strerror instead of tuple subscript
image-fuzzer: Use errors parameter of subprocess.Popen()
image-fuzzer: Run using python3
image-fuzzer: Encode file name and file format to bytes
image-fuzzer: Use bytes constant for field values
image-fuzzer: Return bytes objects on string fuzzing functions
image-fuzzer: Use %r for all fiels at Field.__repr__()
image-fuzzer: Use io.StringIO
image-fuzzer: Explicitly use integer division operator
image-fuzzer: Write bytes instead of string to image file
image-fuzzer: Open image files in binary mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=0aXg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-next-pull-request' into staging
Fix the fw_cfg reboot-timeout=-1 special value, add a test for it.
# gpg: Signature made Sun 03 Nov 2019 22:21:02 GMT
# gpg: using RSA key 89C1E78F601EE86C867495CBA2A3FD6EDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (Phil) <philmd@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 89C1 E78F 601E E86C 8674 95CB A2A3 FD6E DEAD C0DE
* remotes/philmd-gitlab/tags/fw_cfg-next-pull-request:
tests/fw_cfg: Test 'reboot-timeout=-1' special value
fw_cfg: Allow reboot-timeout=-1 again
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OSError can't be used like a tuple on Python 3, so change the
code to use `e.sterror` instead of `e[1]`.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20191021214117.18091-1-ehabkost@redhat.com
Message-Id: <20191021214117.18091-1-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of manually encoding stderr and stdout output, use
`errors` parameter of subprocess.Popen(). This will make
process.communicate() return unicode strings instead of bytes
objects.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-11-ehabkost@redhat.com
Message-Id: <20191016192430.25098-11-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
image-fuzzer is now supposed to be ready to run using Python 3.
Remove the __future__ imports and change the interpreter line to
"#!/usr/bin/env python3".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-10-ehabkost@redhat.com
Message-Id: <20191016192430.25098-10-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Callers of create_image() will pass strings as arguments, but the
Image class will expect bytes objects to be provided. Encode
them inside create_image().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-9-ehabkost@redhat.com
Message-Id: <20191016192430.25098-9-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Field values are supposed to be bytes objects, not unicode
strings. Change two constants that were declared as strings.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-8-ehabkost@redhat.com
Message-Id: <20191016192430.25098-8-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
No caller of fuzzer functions is interested in unicode string values,
so replace them with bytes sequences.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-7-ehabkost@redhat.com
Message-Id: <20191016192430.25098-7-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes the formatting code simpler, and safer if we change
the type of self.value from str to bytes.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-6-ehabkost@redhat.com
Message-Id: <20191016192430.25098-6-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
StringIO.StringIO is not available on Python 3, but io.StringIO
is available on both Python 2 and 3. io.StringIO is slightly
different from the Python 2 StringIO module, though, so we need
bytes coming from subprocess.Popen() to be explicitly decoded.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-5-ehabkost@redhat.com
Message-Id: <20191016192430.25098-5-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Most of the division expressions in image-fuzzer assume integer
division. Use the // operator to keep the same behavior when we
move to Python 3.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-4-ehabkost@redhat.com
Message-Id: <20191016192430.25098-4-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is necessary for Python 3 compatibility.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-3-ehabkost@redhat.com
Message-Id: <20191016192430.25098-3-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This probably never caused problems because on Linux there's no
actual newline conversion happening, but on Python 3 the
binary/text distinction is stronger and we must explicitly open
the image file in binary mode.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-2-ehabkost@redhat.com
Message-Id: <20191016192430.25098-2-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow cpu 'host' to enable SVE when it's available, unless the
user chooses to disable it with the added 'sve=off' cpu property.
Also give the user the ability to select vector lengths with the
sve<N> properties. We don't adopt 'max' cpu's other sve property,
sve-max-vq, because that property is difficult to use with KVM.
That property assumes all vector lengths in the range from 1 up
to and including the specified maximum length are supported, but
there may be optional lengths not supported by the host in that
range. With KVM one must be more specific when enabling vector
lengths.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-10-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the SVE vq map initialization and validation with KVM's
supported vector lengths when KVM is enabled. In order to determine
and select supported lengths we add two new KVM functions for getting
and setting the KVM_REG_ARM64_SVE_VLS pseudo-register.
This patch has been co-authored with Richard Henderson, who reworked
the target/arm/cpu64.c changes in order to push all the validation and
auto-enabling/disabling steps into the finalizer, resulting in a nice
LOC reduction.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-9-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable SVE in the KVM guest when the 'max' cpu type is configured
and KVM supports it. KVM SVE requires use of the new finalize
vcpu ioctl, so we add that now too. For starters SVE can only be
turned on or off, getting all vector lengths the host CPU supports
when on. We'll add the other SVE CPU properties in later patches.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce cpu properties to give fine control over SVE vector lengths.
We introduce a property for each valid length up to the current
maximum supported, which is 2048-bits. The properties are named, e.g.
sve128, sve256, sve384, sve512, ..., where the number is the number of
bits. See the updates to docs/arm-cpu-features.rst for a description
of the semantics and for example uses.
Note, as sve-max-vq is still present and we'd like to be able to
support qmp_query_cpu_model_expansion with guests launched with e.g.
-cpu max,sve-max-vq=8 on their command lines, then we do allow
sve-max-vq and sve<N> properties to be provided at the same time, but
this is not recommended, and is why sve-max-vq is not mentioned in the
document. If sve-max-vq is provided then it enables all lengths smaller
than and including the max and disables all lengths larger. It also has
the side-effect that no larger lengths may be enabled and that the max
itself cannot be disabled. Smaller non-power-of-two lengths may,
however, be disabled, e.g. -cpu max,sve-max-vq=4,sve384=off provides a
guest the vector lengths 128, 256, and 512 bits.
This patch has been co-authored with Richard Henderson, who reworked
the target/arm/cpu64.c changes in order to push all the validation and
auto-enabling/disabling steps into the finalizer, resulting in a nice
LOC reduction.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since 97a28b0eea ("target/arm: Allow VFP and Neon to be disabled via
a CPU property") we can disable the 'max' cpu model's VFP and neon
features, but there's no way to disable SVE. Add the 'sve=on|off'
property to give it that flexibility. We also rename
cpu_max_get/set_sve_vq to cpu_max_get/set_sve_max_vq in order for them
to follow the typical *_get/set_<property-name> pattern.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The special value -1 means "don't reboot" for QEMU/libvirt.
Add a trivial test.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now that Arm CPUs have advertised features lets add tests to ensure
we maintain their expected availability with and without KVM.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20191031142734.8590-3-drjones@redhat.com
[PMM: squash in fix to avoid failure on aarch32-compat]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add QTest tests to check the logical geometry override option.
The tests in hd-geo-test are out of date - they only test IDE and do not
test interesting MBRs.
Creating qcow2 disks with specific size and MBR layout is currently
unused - we only use a default empty MBR.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Peter hit a "Could not open 'TEST_DIR/t.IMGFMT': Failed to get shared
'write' lock - Is another process using the image [TEST_DIR/t.IMGFMT]?"
error with 130 already twice. Looks like this test is a little bit
shaky, and currently nobody has a real clue what could be causing this
issue, so for the time being, let's disable it from the "auto" group so
that it does not gate the pull requests.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There's an updated version of the Debian package containing the m68k
Kernel.
Now, if the package gets updated again, the test won't fail, but will
be canceled. A more permanent solution is certainly needed.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191029232320.12419-3-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The Linux kernel that is extracted from a Debian package for the q800
machine test is hosted on a "pool" location. AFAICT, it gets updated
without too much ceremony, and I don't see any archival location that
is stable enough.
For now, to avoid test errors, let's cancel the test if fetching the
package fails.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191029232320.12419-2-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The intent is to only enable the XTS test if both CONFIG_BLOCK
and CONFIG_QEMU_PRIVATE_XTS are set to 'y'.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191030151740.14326-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It's an old compatibility shim that just delegates to ide-cd or ide-hd.
I'd like to refactor these some day, and getting rid of the super-object
will make that easier.
Either way, we don't need this.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-id: 20191009224303.10232-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=0cvU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python (acceptance tests) queue, 2019-10-28
# gpg: Signature made Mon 28 Oct 2019 23:43:11 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
tests/boot_linux_console: Run BusyBox on 5KEc 64-bit cpu
tests/boot_linux_console: Add initrd test for the Exynos4210
tests/boot_linux_console: Add a test for the Raspberry Pi 2
tests/boot_linux_console: Use Avocado archive::gzip_uncompress()
.travis.yml: Let the avocado job run the 40p tests
tests/acceptance: Test OpenBIOS on the PReP/40p
tests/acceptance: Add test that runs NetBSD 4.0 installer on PRep/40p
.travis.yml: Let the avocado job run the Leon3 test
tests/acceptance: Add test that boots the HelenOS microkernel on Leon3
tests/acceptance: Refactor exec_command_and_wait_for_pattern()
tests/acceptance: Send <carriage return> on serial lines
tests/acceptance: Fix wait_for_console_pattern() hangs
Acceptance tests: refactor wait_for_console_pattern
Python libs: close console sockets before shutting down the VMs
Acceptance tests: work around socket dir
MAINTAINERS: update location of Python libraries
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191029114905.6856-10-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently QEMU uses its own XTS cipher mode, however, this has
relatively poor performance.
Gcrypt now includes its own XTS cipher which is at least x2 faster than
what we get with QEMU's on Fedora/RHEL hosts. With gcrypt git master, a
further x5-6 speed up is seen.
This is essential for QEMU's LUKS performance to be viable.
-----BEGIN PGP SIGNATURE-----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=fkwe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/crypto-luks-pull-request' into staging
crypto: improve performance of ciphers in XTS mode
Currently QEMU uses its own XTS cipher mode, however, this has
relatively poor performance.
Gcrypt now includes its own XTS cipher which is at least x2 faster than
what we get with QEMU's on Fedora/RHEL hosts. With gcrypt git master, a
further x5-6 speed up is seen.
This is essential for QEMU's LUKS performance to be viable.
# gpg: Signature made Mon 28 Oct 2019 15:48:38 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/crypto-luks-pull-request:
crypto: add support for nettle's native XTS impl
crypto: add support for gcrypt's native XTS impl
tests: benchmark crypto with fixed data size, not time period
tests: allow filtering crypto cipher benchmark tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit f3ed93d545 "qapi: Allow documentation for features" neglected
to check documentation against the schema. Fix that: check them the
same way we check arguments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-20-armbru@redhat.com>
Improve error messages from
the following documented members are not in the declaration: a
the following documented members are not in the declaration: aa, bb
to the more concise
documented member 'a' does not exist
documented members 'aa', 'bb' do not exist
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-19-armbru@redhat.com>
When a command's 'data' is an object, its doc comment describes the
arguments defined there. When 'data' names a type, the doc comment
does not describe arguments. Instead, the doc generator inserts a
pointer to the named type.
An event's doc comment works the same.
We don't actually check doc comments for commands and events.
Instead, QAPISchema._def_command() forwards the doc comment to the
implicit argument type, where it gets checked. Works because the
check only cares for the implicit argument type's members.
Not only is this needlessly hard to understand, it actually falls
apart in two cases:
* When 'data' is empty, there is nothing to forward to, and the doc
comment remains unchecked. Demonstrated by test doc-bad-event-arg.
* When 'data' names a type, we can't forward, as the type has its own
doc comment. The command or event's doc comment remains unchecked.
Demonstrated by test doc-bad-boxed-command-arg.
The forwarding goes back to commit 069fb5b250 "qapi: Prepare for
requiring more complete documentation", put to use in commit
816a57cd6e "qapi: Fix detection of bogus member documentation". That
fix was incomplete.
To fix this, make QAPISchemaCommand and QAPISchemaEvent check doc
comments, and drop the forwarding of doc comments to implicit argument
types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-12-armbru@redhat.com>
Enumeration type documentation comments are not checked, as
demonstrated by test doc-bad-enum-member. This is because we neglect
to call self.doc.check() for enumeration types. Messed up in
816a57cd6e "qapi: Fix detection of bogus member documentation". Fix
it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-10-armbru@redhat.com>
Generate a reference "Arguments: the members of ...", just like we do
for commands since commit c2dd311cb7 "qapi2texi: Implement boxed
argument documentation".
No change to generated QMP documentation; we don't yet use boxed
events outside tests/.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-7-armbru@redhat.com>
Commit 8aa3a33e44 "tests/qapi-schema: Test for good feature lists in
structs" made test-qapi.py show features, but neglected to show their
documentation. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-5-armbru@redhat.com>
Add negative tests doc-bad-boxed-command-arg and doc-bad-event-arg to
cover boxed and no arguments. They demonstrate insufficient doc
comment checking.
Update positive test doc-good to cover boxed event arguments. It
demonstrates the generated doc comment misses arguments.
These bugs will be fixed later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-3-armbru@redhat.com>
Add negative tests doc-bad-enum-member and doc-bad-feature to cover
documentation for nonexistent enum members and features, and test
doc-undoc-feature to cover features lacking documentation. None of
them works. To be fixed later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-2-armbru@redhat.com>
This tests boots a Linux kernel on a Malta machine up to a
busybox shell on the serial console. Few commands are executed
before halting the machine (via reboot).
We use the Fedora 24 kernel extracted from the image at:
https://fedoraproject.org/wiki/Architectures/MIPS
and the initrd cpio image from the kerneltests project:
https://kerneltests.org/
If MIPS is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ AVOCADO_ALLOW_UNTRUSTED_CODE=yes \
avocado --show=console run -t arch:mips64el \
tests/acceptance/boot_linux_console.py
console: [ 0.000000] Linux version 3.19.3.mtoman.20150408 (mtoman@debian-co3-1) (gcc version 5.0.0 20150316 (Red Hat 5.0.0-0.20) (GCC) ) #3 Wed Apr 8 14:32:50 UTC 2015
console: [ 0.000000] Early serial console at I/O port 0x3f8 (options '38400n8')
console: [ 0.000000] bootconsole [uart0] enabled
console: [ 0.000000] CPU0 revision is: 00018900 (MIPS 5KE)
console: [ 0.000000] Checking for the multiply/shift bug... no.
console: [ 0.000000] Checking for the daddiu bug... no.
[...]
console: Boot successful.
console: cat /proc/cpuinfo
console: / # cat /proc/cpuinfo
console: system type : MIPS Malta
console: machine : Unknown
console: processor : 0
console: cpu model : MIPS 5KE V0.0
console: : 1616.89
console: wait instruction : nouname -a
console: microsecond timers : yes
console: tlb_entries : 32
console: extra interrupt vector : yes
console: hardware watchpoint : yes, count: 1, address/irw mask: [0x0ff8]
console: isa : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
console: ASEs implemented :
console: shadow register sets : 1
console: kscratch registers : 0
console: package : 0
console: core : 0
console: VCED exceptions : not available
console: VCEI exceptions : not available
console: / #
console: / # uname -a
console: Linux buildroot 3.19.3.mtoman.20150408 #3 Wed Apr 8 14:32:50 UTC 2015 mips64 GNU/Linux
console: reboot
console: / #
console: / # reboot
console: / #
console: / # reboot: Restarting system
PASS (7.04 s)
JOB TIME : 7.20 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-27-philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This test boots a Linux kernel on a smdkc210 board and verify
the serial output is working.
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
This test can be run using:
$ IGNORE_AVOCADO_CONSOLE_BUG=yes \
avocado --show=app,console run -t machine:smdkc210 \
tests/acceptance/boot_linux_console.py
console: Booting Linux on physical CPU 0x900
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
console: OF: fdt: Machine model: Samsung smdkv310 evaluation board based on Exynos4210
[...]
console: Samsung CPU ID: 0x43210211
console: random: get_random_bytes called from start_kernel+0xa0/0x504 with crng_init=0
console: percpu: Embedded 17 pages/cpu s39756 r8192 d21684 u69632
console: Built 1 zonelists, mobility grouping on. Total pages: 249152
console: Kernel command line: printk.time=0 console=ttySAC0,115200n8 earlyprintk random.trust_cpu=off cryptomgr.notests cpuidle.off=1 panic=-1 noreboot
[...]
console: L2C: platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C: platform provided aux values permit register corruption.
console: L2C: DT/platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C-310 erratum 769419 enabled
console: L2C-310 enabling early BRESP for Cortex-A9
console: L2C-310: enabling full line of zeros but not enabled in Cortex-A9
console: L2C-310 ID prefetch enabled, offset 1 lines
console: L2C-310 dynamic clock gating disabled, standby mode disabled
console: L2C-310 cache controller enabled, 8 ways, 128 kB
console: L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e420001
console: Exynos4210 clocks: sclk_apll = 12000000, sclk_mpll = 12000000
console: sclk_epll = 12000000, sclk_vpll = 12000000, arm_clk = 12000000
[...]
console: s3c-i2c 13860000.i2c: slave address 0x00
console: s3c-i2c 13860000.i2c: bus frequency set to 93 KHz
console: s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter
[...]
console: dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12680000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12690000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12850000.mdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-1 Num_Events-16
console: dma-pl330 12850000.mdma: PM domain LCD0 will not be powered off
console: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console: Serial: AMBA driver
console: 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 40, base_baud = 0) is a S3C6400/10
console: console [ttySAC0] enabled
console: 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 41, base_baud = 0) is a S3C6400/10
console: 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 42, base_baud = 0) is a S3C6400/10
console: 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 43, base_baud = 0) is a S3C6400/10
[...]
console: Freeing unused kernel memory: 2048K
console: Run /init as init process
console: mount: mounting devtmpfs on /dev failed: Device or resource busy
console: Starting logging: OK
console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
console: done.
console: Starting network: OK
console: Found console ttySAC0
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: Boot successful.
PASS (37.98 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-25-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: removed conditional to skip test]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Similar to the x86_64/pc test, it boots a Linux kernel on a raspi2
board and verify the serial is working.
The kernel image and DeviceTree blob are built by the Raspbian
project (based on Debian):
https://www.raspbian.org/RaspbianImages
as recommended by the Raspberry Pi project:
https://www.raspberrypi.org/downloads/raspbian/
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:arm tests/acceptance
$ avocado run -t machine:raspi2 tests/acceptance
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-21-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Avocado 67.0 [*] introduced the avocado.utils.archive module which
provides handling of gzip files. Use the gzip_uncompress() method.
[*] https://avocado-framework.readthedocs.io/en/67.0/api/utils/avocado.utils.html#avocado.utils.archive.gzip_uncompress
Suggested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-20-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
User case from:
https://mail.coreboot.org/pipermail/openbios/2018-May/010360.html
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-16-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: added skip conditional for Travis]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
As of this commit, NetBSD 4.0 is very old. However it is enough to
test the PRep/40p machine.
User case from:
http://mail-index.netbsd.org/port-prep/2017/04/11/msg000112.html
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-14-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: fixed file name and imports]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Refactor the exec_command_and_wait_for_pattern() utility method
so we can reuse it in other files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191028073441.6448-6-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Some firmwares don't parse the <Newline> control character and
expect a <carriage return>.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-5-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Because of a possible deadlock (QEMU waiting for the socket to
become writable) let's close the console socket as soon as we
stop to use it.
Suggested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191028073441.6448-4-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
[Cleber: corrected small typo in commit message]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The same utility method is already present in two different test
files, so let's consolidate it into a single utility function.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190916164011.7653-1-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: failure_message is optional]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191028073441.6448-3-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Change 32558ce7a4 introduced specific directories for the socket dir
when using python/qemu/machine.py:QEMUMachine. iotests probably
didn't catch the condition that two simultaneous QEMUMachine
instances, without manually set temporary or socket dirs would clash.
Having two QEMUMachine instances is a condition expected for many
acceptance tests, and it's already used by the migration tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This test boots a Linux kernel on a Quadra 800 board
and verify the serial is working.
Example:
$ avocado --show=app,console run -t machine:q800 tests/acceptance/boot_linux_console.py
console: ABCFGHIJK
console: Linux version 5.2.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-21)) #1 Debian 5.2.9-2 (2019-08-21)
console: Detected Macintosh model: 35
console: Apple Macintosh Quadra 800
console: Built 1 zonelists, mobility grouping on. Total pages: 32448
console: Kernel command line: printk.time=0 console=ttyS0 vga=off
[...]
console: Calibrating delay loop... 1236.99 BogoMIPS (lpj=6184960)
[...]
console: NuBus: Scanning NuBus slots.
console: Slot 9: Board resource not found!
console: SCSI subsystem initialized
console: clocksource: Switched to clocksource via1
[...]
console: macfb: framebuffer at 0xf9001000, mapped to 0x(ptrval), size 468k
console: macfb: mode is 800x600x8, linelength=800
console: Console: switching to colour frame buffer device 100x37
console: fb0: DAFB frame buffer device
console: pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
console: scc.0: ttyS0 at MMIO 0x50f0c022 (irq = 4, base_baud = 230400) is a Z85c30 ESCC - Serial port
console: scc.1: ttyS1 at MMIO 0x50f0c020 (irq = 4, base_baud = 230400) is a Z85c30 ESCC - Serial port
console: Non-volatile memory driver v1.3
console: adb: Mac II ADB Driver v1.0 for Unified ADB
console: mousedev: PS/2 mouse device common for all mice
console: random: fast init done
console: Detected ADB keyboard, type <unknown>.
console: input: ADB keyboard as /devices/virtual/input/input0
console: input: ADB mouse as /devices/virtual/input/input1
console: rtc-generic rtc-generic: registered as rtc0
console: ledtrig-cpu: registered to indicate activity on CPUs
[...]
console: rtc-generic rtc-generic: setting system clock to 2019-09-10T16:20:25 UTC (1568132425)
console: List of all partitions:
console: No filesystem could mount root, tried:
JOB TIME : 2.91 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190910163430.11326-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191026164546.30020-12-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Libgcrypt 1.8.0 added support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
As an added benefit, using this improves performance from 531 MB/sec to
670 MB/sec, since we are avoiding several layers of function call
indirection.
This is even more noticable with the gcrypt builds in Fedora or RHEL-8
which have a non-upstream patch for FIPS mode which does mutex locking.
This is catastrophic for encryption performance with small block sizes,
meaning this patch improves encryption from 240 MB/sec to 670 MB/sec.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This plugin gives a summary of access patterns grouped by "pages" and
showing read/write patterns by vCPUS.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This gives a break down of instruction classes and individual
instruction types.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is a simple plugin to track which translation blocks are call
most often. As we don't have a view of the internals of TCG we can
only work by the address of the start of the block so we also need to
tracks how often the address is translated.
As there will be multiple blocks starting at the same address. We can
try and work around this by futzing the value to feed to the hash with
the insn count.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
If CONFIG_PLUGINS is enabled then lets enable testing for all our TCG
targets. This is a simple smoke test that ensure we don't crash or
otherwise barf out by running each plugin against each test.
There is a minor knock on effect for additional runners which need
specialised QEMU_OPTS which will also need to declare a plugin version
of the runner. If this gets onerous we might need to add another
helper.
Checking the results of the plugins is left for a later exercise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is a very slow running test which we only enable explicitly.
However having it in the TESTS lists would confuse additional tests
like the plugins test which want to run on all currently enabled
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Otherwise clever expanders like the plugins test get unstuck.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This will important for ensuring the plugin test variants will also
work.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Since moving where the tests are run the path to config-host.mak has
been wrong. This doesn't affect much but things like the time fallback
for CONFIG_DEBUG_TCG and will also get in the way of checking for
PLUGINS support.
Fixes: fc76c56d3f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Pass arguments with -plugin=libfoo.so,arg=bar,arg=baz
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl2224ESHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AeXMH/RXKEX4BZYMRKCe41P18tJC9Bl2x0T20
YeOsZVvpARlr7o/36BF2kGFF4MnL0OQ+9ELuyROX865rk/VL2rWqnHDE5oQM889a
dFwMs+0zvNbig3iLNcw0H5OkE2mrdM+a1EUdn/lBe/39Z8dPqPxRGqIYHq38Ugdu
emwSy1nWen7o0f71HRJfyVtI3KcrzXx71FrA/FY2yL/eHz+zRYGZj2SpAdFPkXP/
lgaz+m0tWhnSW1QzEOXB0Gh69ULt/DczCinYmv5qUY1noW5TPPtiDNCQTts5O4ba
oJsR3AJv5/l9m65JTmiyQSqnQfPcstrQ5FqOcSnP637cfqUFyWsvdks=
=L7v1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-10-28' into staging
Block patches for softfreeze:
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
# gpg: Signature made Mon 28 Oct 2019 12:13:53 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-10-28: (69 commits)
qemu-iotests: restrict 264 to qcow2 only
Revert "qemu-img: Check post-truncation size"
block: Pass truncate exact=true where reasonable
block: Let format drivers pass @exact
block: Evaluate @exact in protocol drivers
block: Add @exact parameter to bdrv_co_truncate()
block: Do not truncate file node when formatting
block/cor: Drop cor_co_truncate()
block: Handle filter truncation like native impl.
iotests: Test qcow2's snapshot table handling
iotests: Add peek_file* functions
qcow2: Fix v3 snapshot table entry compliancy
qcow2: Repair snapshot table with too many entries
qcow2: Fix overly long snapshot tables
qcow2: Keep track of the snapshot table length
qcow2: Fix broken snapshot table entries
qcow2: Add qcow2_check_fix_snapshot_table()
qcow2: Separate qcow2_check_read_snapshot_table()
qcow2: Write v3-compliant snapshot list on upgrade
qcow2: Put qcow2_upgrade() into its own function
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
libqos update with support for virtio 1.
Packed ring support for virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdsuDvAAoJECgfDbjSjVRpIP8H/3rHSvZ5+MQGCFLI5GU8m3za
JSOaBSmtcj9KwrpibBfptSCJZNrG8EUVHyo+Z+pvGohXqDB8h9RyBfb6vID8jqzC
5wIzlNBP27F668MUBt2t7xSwK0PWO1QOpEKk6S4SJMpl51ea8ePlTH0jnLVfkaAN
hFKU1wqwc2gMyF9rDjOZ6I+OO1iQbMcrsazFrCXECXCkxDcJM0ey7MheKxVntTjt
0sxFHM2I1A+vXtAzlLo6rS3I9vJ0ATfLfOlZLqrq5uSAL5FKrqsbmGh4sAsFTQAA
eerR6zDz3X+YqfQaVgVk2wixPHQz2w8Rv68j6SiGrdZ29/JT6nVWHT8cGtPsX4c=
=iJuG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio: features, tests
libqos update with support for virtio 1.
Packed ring support for virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 25 Oct 2019 12:47:59 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio: drop unused virtio_device_stop_ioeventfd() function
libqos: add VIRTIO PCI 1.0 support
libqos: extract Legacy virtio-pci.c code
libqos: make the virtio-pci BAR index configurable
libqos: expose common virtqueue setup/cleanup functions
libqos: add MSI-X callbacks to QVirtioPCIDevice
libqos: pass full QVirtQueue to set_queue_address()
libqos: add iteration support to qpci_find_capability()
libqos: access VIRTIO 1.0 vring in little-endian
libqos: implement VIRTIO 1.0 FEATURES_OK step
libqos: enforce Device Initialization order
libqos: add missing virtio-9p feature negotiation
tests/virtio-blk-test: set up virtqueue after feature negotiation
virtio-scsi-test: add missing feature negotiation
libqos: extend feature bits to 64-bit
libqos: read QVIRTIO_MMIO_VERSION register
tests/virtio-blk-test: read config space after feature negotiation
virtio: add property to enable packed virtqueue
vhost_net: enable packed ring support
virtio: event suppression support for packed ring
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the crypto benchmarks are processing data in varying chunk
sizes, over a fixed time period. This turns out to be a terrible idea
because with small chunk sizes the overhead of checking the elapsed
time on each loop iteration masks the true performance.
Benchmarking over a fixed data size avoids the loop running any system
calls which can interfere with the performance measurements.
Before this change
Enc chunk 512 bytes 2283.47 MB/sec Dec chunk 512 bytes 2236.23 MB/sec OK
Enc chunk 4096 bytes 2744.97 MB/sec Dec chunk 4096 bytes 2614.71 MB/sec OK
Enc chunk 16384 bytes 2777.53 MB/sec Dec chunk 16384 bytes 2678.44 MB/sec OK
Enc chunk 65536 bytes 2809.34 MB/sec Dec chunk 65536 bytes 2699.47 MB/sec OK
After this change
Enc chunk 512 bytes 2058.22 MB/sec Dec chunk 512 bytes 2030.11 MB/sec OK
Enc chunk 4096 bytes 2699.27 MB/sec Dec chunk 4096 bytes 2573.78 MB/sec OK
Enc chunk 16384 bytes 2748.52 MB/sec Dec chunk 16384 bytes 2653.76 MB/sec OK
Enc chunk 65536 bytes 2814.08 MB/sec Dec chunk 65536 bytes 2712.74 MB/sec OK
The actual crypto performance hasn't changed, which shows how
significant the mis-measurement has been for small data sizes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for specifying a cipher mode and chunk size as argv to
filter which combinations are benchmarked. For example to only
benchmark XTS mode with 512 byte chunks:
./tests/benchmark-crypto-cipher xts 512
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
264 is unprepared to run with different formats, for example luks needs
handling keys, cloop doesn't support image creation, vpc creates image
larger than requested (which breaks "Backup completed: 5242880" in test
output).
The test is here to check nbd-reconnect feature and we actually don't
need it for all formats. Let's restrict it to qcow2 only.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191025145023.6182-1-vsementsov@virtuozzo.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk. Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.
This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around. All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior. Future patches take care
of that.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a test how our qcow2 driver handles extra data in snapshot table
entries, and how it repairs overly long snapshot tables.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sockets should be placed into $SOCK_DIR instead of $TEST_DIR, so remove
the $TEST_DIR filter from _filter_nbd.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-24-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-23-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-22-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-21-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-20-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-19-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-18-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-17-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-16-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-15-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-14-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In addition, drop the nbd_unix_socket assignment in 241 because it does
not really do anything.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-6-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-5-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Specifying this optional parameter allows creating temporary files in
other directories than the test_dir; for example in sock_dir.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotests.py itself does not store socket files, but machine.py and
qtest.py do. iotests.py needs to pass the respective path to them, and
they need to adhere to it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Unix sockets generally have a maximum path length. Depending on your
$TEST_DIR, it may be exceeded and then all tests that create and use
Unix sockets there may fail.
Circumvent this by adding a new scratch directory specifically for
Unix socket files. It defaults to a temporary directory (mktemp -d)
that is completely removed after the iotests are done.
(By default, mktemp -d creates a /tmp/tmp.XXXXXXXXXX directory, which
should be short enough for our use cases.)
Use mkdir -p to create the directory (because it seems right), and do
the same for $TEST_DIR (because there is no reason for that to be
created in any different way).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191017133155.5327-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
null-aio may not be whitelisted. Skip all test cases that require it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-7-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
null-aio may not be whitelisted. Skip all test cases that require it.
(And skip the whole test if null-co is not whitelisted.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-6-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This lets tests use skip_if_unsupported() with a potentially variable
list of required formats.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-5-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
skip_if_unsupported() should use the stronger variant case_skip(),
because this allows it to be used even with setUp() (in a meaningful
way).
In the process, make it explicit what we expect the first argument of
the func_wrapper to be (namely something derived of QMPTestCase).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-4-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
case_notrun() does not actually skip the current test case. It just
adds a "notrun" note and then returns to the caller, who manually has to
skip the test. Generally, skipping a test case is as simple as
returning from the current function, but not always: For example, this
model does not allow skipping tests already in the setUp() function.
Thus, add a QMPTestCase.case_skip() function that invokes case_notrun()
and then self.skipTest(). To make this work, we need to filter the
information on how many test cases were skipped from the unittest
output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-id: 20190917092004.999-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We use null-co basically everywhere in the iotests. Unless we want to
test null-aio specifically, we should use it instead (for consistency).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190917092004.999-2-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- various Travis dependency updates
- enable tcg debug for check-tcg
- additional Xcode build for Cirrus
- dependency tweak for gitlab
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl2zTpwACgkQ+9DbCVqe
KkQm7Af/co4HilswuPFIdfHDlsxR4UzdEWjdzFVjZl/3eeV52tRD+46ybfxGRQkL
drbf5sekgnQmRZQw74l9FrXXnZmmVZk0rX7T45t/58gARZgrvDmkCqbUBE4DXQLz
Oleqdi6yOOH3N2oszu5skPB6qF8FvQesTrHzAh1KDyUG3mQIbV0mQNmAyVtvIzEz
Jpro16ar6/PeZfp8Elp7ysrWA80cZIKKwMQonBIdEF4OK1DCSnW/Szw3uj0Jbnkp
cSCiEprPhb94Dm2a8DKrIQrPpFzIUvDJQmCqYyiufB3KLsH5bfps0zs3NBY44GjV
sM6SmSExhwPAu5JvwnqM7tYw5RLeAA==
=KxjG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-251019-3' into staging
Testing updates (split from mega PR)
- various Travis dependency updates
- enable tcg debug for check-tcg
- additional Xcode build for Cirrus
- dependency tweak for gitlab
# gpg: Signature made Fri 25 Oct 2019 20:35:56 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-251019-3:
tests/docker: update Travis image to a more current version
tests/docker: set HOST_ARCH if we don't have ARCH
travis.yml: --enable-debug-tcg to check-tcg
gitlab-ci.yml: Use libvdeplug-dev to compile-test the VDE network backend
travis.yml: cache the clang sanitizer build
tests/vm/netbsd: Disable IPv6
tests/vm: Let subclasses disable IPv6
cirrus.yml: add latest Xcode build target
travis.yml: bump Xcode 10 to latest dot release
travis.yml: Test the release tarball
travis.yml: Fix the ccache lines
travis.yml: Use newer version of libgnutls and libpng
travis.yml: Use libsdl2 instead of libsdl1.2, and install libsdl2-image
travis.yml: Add libvdeplug-dev to compile-test net/vde.c
travis.yml: reduce scope of the --enable-debug build
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This isn't the latest one available on hub.docker.com but it does
match the ID reported by the Xenial builds running on Travis:
instance: ... travis-ci-sardonyx-xenial-1553530528-f909ac5
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As the docker rules want to be able to be run on a virgin unconfigured
checkout add a fallback and use it if we need to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Workaround for issues when the host has no IPv6 connectivity.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191018181705.17957-4-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The mechanism will be used to work around issues related to IPv6
on the netbsd image builder.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018181705.17957-3-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Commit 9090d3332c added tests for specific to the 32-bit
machines, which inadvertently make the 64-bit tests failing.
Now than we have this information available in the CPU_INFO
array, use it to have the 64-bit tests back.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-12-f4bug@amsat.org>
The qcow and kernel images use a similar pattern regarding they
are for big/little endianess, or 32/64 bit.
Refactor using more dictionary keys.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-11-f4bug@amsat.org>
Match on stricter console output.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-10-f4bug@amsat.org>
Remove duplicated test (probably copy/paste error in
commit 9090d3332c).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-9-f4bug@amsat.org>
If a test fails, it can corrupt the underlying QCow2 image,
making further tests failing.
Fix this by running each test with a snapshot.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-8-f4bug@amsat.org>
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
-----BEGIN PGP SIGNATURE-----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=JZpU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
# gpg: Signature made Fri 25 Oct 2019 14:19:04 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
coroutine: Add qemu_co_mutex_assert_locked()
doc: Describe missing generic -blockdev options
block/backup: drop dead code from backup_job_create
blockdev: Use error_report() in hmp_commit()
iotests: Skip read-only cases in 118 when run as root
qapi: add support for blkreplay driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some tests in 118 use chmod to remove write permissions from the file
and assume that the image can indeed not be opened read-write
afterwards. This doesn't work when the test is run as root, because root
can still open the file as writable even when the permission bit isn't
set.
Introduce a @skip_if_root decorator and use it in 118 to skip the tests
in question when the script is run as root.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Implement the VIRTIO 1.0 virtio-pci interface. The main change here is
that the register layout is no longer a fixed layout in BAR 0. Instead
we have to iterate of PCI Capabilities to find descriptions of where
various registers are located. The vring registers are also more
fine-grained, allowing for more flexible vring layouts, but we don't
take advantage of that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191023100425.12168-17-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
The current libqos virtio-pci.c code implements the VIRTIO Legacy
interface. Extract existing code in preparation for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-16-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Legacy virtio-pci interface always uses BAR 0. VIRTIO 1.0 may need
to use a different BAR index, so make it configurable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-15-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VIRTIO 1.0 code will need to perform additional steps but it will
reuse the common virtqueue setup/cleanup code. Make these functions
public.
Make sure to invoke callbacks via QVirtioBus instead of directly calling
the virtio-pci Legacy versions of these functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-14-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The MSI-X vectors are programmed differently in the VIRTIO 1.0 and
Legacy interfaces. Introduce callbacks so different implementations can
be used depending on the interface version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-13-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of just passing the vring page frame number, pass the full
QVirtQueue. This will allow the VIRTIO 1.0 transport to program the
fine-grained vring address registers in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-12-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO 1.0 PCI devices have multiple PCI_CAP_ID_VNDR capabilities so we
need a way to iterate over them. Extend qpci_find_capability() to take
the last address.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
--
v3:
* Document qpci_find_capability()
Message-Id: <20191023100425.12168-11-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO 1.0 uses little-endian for the vring. Legacy VIRTIO uses guest
endianness. Adjust the code to handle both.
Note that qvirtio_readq() is not defined because it has no users. All
the other accessors are really needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-10-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Device initialization has an extra step in VIRTIO 1.0. The FEATURES_OK
status bit is set to indicate that feature negotiation has completed.
The driver then reads the status register again to check that the device
agrees with the final features.
Implement this step as part of qvirtio_set_features() instead of
introducing a separate function. This way all existing code works
without modifications.
The check in qvirtio_set_driver_ok() needs to be updated because
FEATURES_OK will be set for VIRTIO 1.0 devices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-9-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth" <thuth@redhat.com>
According to VIRTIO 1.1 "3.1.1 Driver Requirements: Device
Initialization", configuration space and virtqueues cannot be accessed
before features have been negotiated. Enforce this requirement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-8-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
VIRTIO Device Initialization requires feature negotiation. The libqos
virtio-9p driver lacks feature negotiation and is therefore
non-compliant.
libqos tests acknowledge all feature bits advertised by the device,
except VIRTIO_F_BAD_FEATURE (which devices use to detect broken
drivers!) and VIRTIO_RING_F_EVENT_IDX (which is not implemented in
libqos and accepting it would break notifications).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-7-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth" <thuth@redhat.com>
VIRTIO Device Initialization requires that feature negotiation has
completed before virtqueues are set up. This makes sense because the
driver must know whether it is operating in Legacy or VIRTIO 1.0 mode
before it can access vring fields with the correct endianness.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-6-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO Device Initialization requires feature negotiation. Currently
virtio-scsi-test.c is non-compliant.
libqos tests acknowledge all feature bits advertised by the device,
except VIRTIO_F_BAD_FEATURE (which devices use to detect broken
drivers!) and VIRTIO_RING_F_EVENT_IDX (which is not implemented in
libqos and accepting it would break notifications).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth" <thuth@redhat.com>
In VIRTIO 1.0 feature bits changed from 32-bit to 64-bit. (In fact, the
transports allow even more feature bits but nothing uses more than 64
bits today.)
Add 64-bit feature bit support to virtio-mmio and virtio-pci. This will
be necessary for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There was no real virtio-mmio ABI change between Legacy and VIRTIO 1.0
except that the Version field was incremented from 1 to 2.
However, QEMU does not allow Legacy drivers to perform VIRTIO 1.0
operations like accessing 64-bit feature bits. Since we will introduce
64-bit feature bit support we need a way to differentiate between
virtio-mmio Version 1 and 2 to avoid upsetting QEMU when we operate in
Legacy mode.
Stash away the Version field so later patches can change behavior
depending on the version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VIRTIO Configuration Space cannot be accessed before device feature
bits have been read because a driver doesn't know the endianness until
it has checked VIRTIO_F_VERSION_1.
Fix this problem in preparation for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The MC146818 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Use copyright statement from 80cabfad16 for "hw/rtc/mc146818rtc.h".
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The ISA default number for the RTC devices is not related to its
registers neither. Move this definition to "hw/timer/mc146818rtc.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018133547.10936-3-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add test, which starts backup to nbd target and restarts nbd server
during backup.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191009084158.15614-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 8aa3a33e44 "tests/qapi-schema: Test for good feature lists in
structs" neglected to cover documentation comments, and the previous
commit followed its example. Make up for them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-4-armbru@redhat.com>
Similarly to features for struct types introduce the feature flags also
for commands. This will allow notifying management layers of fixes and
compatible changes in the behaviour of a command which may not be
detectable any other way.
The changes were heavily inspired by commit 6a8c0b5102.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-3-armbru@redhat.com>
Command and event details are indented three spaces, everything else
four. Messed up in commit 156402e504. Use four spaces consistently.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20191018081454.21369-2-armbru@redhat.com>
The QAPI code generator clocks in at some 3100 SLOC in 8 source files.
Almost 60% of the code is in qapi/common.py. Split it into more
focused modules:
* Move QAPISchemaPragma and QAPISourceInfo to qapi/source.py.
* Move QAPIError and its sub-classes to qapi/error.py.
* Move QAPISchemaParser and QAPIDoc to parser.py. Use the opportunity
to put QAPISchemaParser first.
* Move check_expr() & friends to qapi/expr.py. Use the opportunity to
put the code into a more sensible order.
* Move QAPISchema & friends to qapi/schema.py
* Move QAPIGen and its sub-classes, ifcontext,
QAPISchemaModularCVisitor, and QAPISchemaModularCVisitor to qapi/gen.py
* Delete camel_case(), it's unused since commit e98859a9b9 "qapi:
Clean up after recent conversions to QAPISchemaVisitor"
A number of helper functions remain in qapi/common.py. I considered
moving the code generator helpers to qapi/gen.py, but decided not to.
Perhaps we should rewrite them as methods of QAPIGen some day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-7-armbru@redhat.com>
[Add "# -*- coding: utf-8 -*-" lines]
"make check-qapi-schema" takes around 10s user + system time for me.
With -j, it takes a bit over 3s real time. We have worse tests. It's
still annoying when you work on the QAPI generator.
Some 1.4s user + system time is consumed by make figuring out what to
do, measured by making a target that does nothing. There's nothing I
can do about that right now. But let's see what we can do about the
other 8s.
Almost 7s are spent running test-qapi.py for every test case, the rest
normalizing and diffing test-qapi.py output. We have 190 test cases.
If I downgrade to python2, it's 4.5s, but python2 is a goner.
Hacking up test-qapi.py to exit(0) without doing anything makes it
only marginally faster. The problem is Python startup overhead.
Our configure puts -B into $(PYTHON). Running without -B is faster:
4.4s.
We could improve the Makefile to run test cases only when the test
case or the generator changed. But I'm after improvement in the case
where the generator changed.
test-qapi.py is designed to be the simplest possible building block
for a shell script to do the complete job (it's actually a Makefile,
not a shell script; no real difference). Python is just not meant for
that. It's for bigger blocks.
Move the post-processing and diffing into test-qapi.py, and make it
capable of testing multiple schema files. Set executable bits while
there.
Running it once per test case now takes slightly longer than 8s. But
running it once for all of them takes under 0.2s.
Messing with the Makefile to run it only on the tests that need
retesting is clearly not worth the bother.
Expected error output changes because the new normalization strips off
$(SRCDIR)/tests/qapi-schema/ instead of just $(SRCDIR)/.
The .exit files go away, because there is no exit status to test
anymore.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-5-armbru@redhat.com>
Commit bc52d03ff5 "qapi: Make doc comments optional where we don't
need them" made scripts/qapi2texi.py fail[*] unless the schema had
pragma 'doc-required': true. The stated reason was inability to cope
with incomplete documentation.
When commit fb0bc835e5 "qapi-gen: New common driver for code and doc
generators" folded scripts/qapi2texi.py into scripts/qapi-gen.py, it
turned the failure into silent suppression.
The doc generator can cope with incomplete documentation now. I don't
know since when, or what the problem was, or even whether it ever
existed.
Drop the silent suppression.
[*] The fail part was broken, fixed in commit e8ba07ea9a.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-2-armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190927122355.7344-8-vsementsov@virtuozzo.com
[Maintainer edit: removed 260 from auto group per Peter Maydell. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Reopening bitmaps to RW was broken prior to previous commit. Check that
it works now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190927122355.7344-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
hbitmap_reset has an unobvious property: it rounds requested region up.
It may provoke bugs, like in recently fixed write-blocking mode of
mirror: user calls reset on unaligned region, not keeping in mind that
there are possible unrelated dirty bytes, covered by rounded-up region
and information of this unrelated "dirtiness" will be lost.
Make hbitmap_reset strict: assert that arguments are aligned, allowing
only one exception when @start + @count == hb->orig_size. It's needed
to comfort users of hbitmap_next_dirty_area, which cares about
hb->orig_size.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190806152611.280389-1-vsementsov@virtuozzo.com>
[Maintainer edit: Max's suggestions from on-list. --js]
[Maintainer edit: Eric's suggestion for aligned macro. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
/6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
=+xdg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit bc1fb850a3 silently broke device_add test for CPU hotplug which
resulted in test successfully passing though it wasn't actually run.
Fix it by making sure that all non present CPUs reported
by "query-hotpluggable-cpus" are hotplugged instead of making up
and hardcoding values.
Use of query-hotpluggable-cpus also allows consolidatiate device_add
cpu testcases and reuse the same test function for all targets.
While at it also add a check that at least one CPU was hotplugged,
to avoid silent breakage in the future.
Fixes: bc1fb850a3 (vl.c deprecate incorrect CPUs topology)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190830110723.15096-3-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
