When a reset is requested, the current e1000 emulation never clears the
reset bit which may cause a driver to hang. This patch masks the reset
bit out when setting the control registert, so the reset is immediately
completed.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit ffad4116b9 removed the "scratch buffer"
from check_params, but didn't care for the error messages which actually
included this string to tell the user which option was wrong. Now this string
is uninitialized, so this patch removes it from the message.
This means that the user is only told the whole parameter string and has to
pick the wrong option by himself as the callers of check_params can't know this
value any more. An alternative approach would be to revert that commit and do
whatever is needed to fix the original problem without changing check_params.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This setup was designed by petalogix and is supported by upstream linux.
The design targets a xilinx spartan-3a-1800 dsp board with MMU.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
We have both IRQ sinks and GPIO inputs. These are in principle exactly
the same thing, so remove the former.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Add a dummy command to the all: rule in sub-makefiles.
This avoids "Nothing to be done for `all'." messages from make.
Signed-off-by: Paul Brook <paul@codesourcery.com>
"struct timeval last" caused a compilation error with mingw32
(missing header for struct timeval).
It is unused, so it was possible to remove it.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Implement and use a common device bus state. The main side-effect is
that creating a bus and attaching it to a parent device are no longer
separate operations. For legacy code we allow a NULL parent, but that
should go away eventually.
Also tweak creation code to veriry theat a device in on the right bus.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Bit 0 is the enable bit, which we not only don't want to set, but
it will stick and make us think it's an I/O port resource.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently Qemu can read from posix I/O and NBD. This patch adds a
third protocol to the game: HTTP.
In certain situations it can be useful to access HTTP data directly,
for example if you want to try out an http provided OS image, but
don't know if you want to download it yet.
Using this patch you can now try it on on the fly. Just use it like:
qemu -cdrom http://host/path/my.iso
Signed-off-by: Alexander Graf <agraf@suse.de>
Add in a workaround to allow the usb serial devices to work with the
usb pass through mechanism. The ioctl() to request an alternate
interface will always return < 0 for a usb-serial device based on the
kernel driver. This means there is no alternate interface end point.
This was fully tested with a pl2303 usb serial device.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
After creating an automated regression test to test the sysrq
responses while running a linux image in qemu, I found that the
simulated uart was eating the character right after the sysrq about
75% of the time.
The problem is that the qemu sets the LSR_DR (data ready) bit on a
serial break. The automated tests can send a break and the sysrq
character quickly enough that the qemu serial fifo has a real
character available. When there is valid character in the fifo, it
gets consumed by the serial driver in the guest OS.
The real hardware also appears to set the LSR_DR but always appears to
have a null byte in this condition. This patch changes the qemu
behavior to match the tested characteristics of a real 16550 chip.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Implement the serial break via usb serial.
The second data byte in ftdi status packet contains the break status.
The values were already defined in usb-serial.c so it was a matter of
making use of the event_trigger to form a urb to send over to the host
controller with the serial break status set.
This was tested against a linux development image which enables sysrq
via a serial break on the ftdi usb console.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
In case a client restarts a DHCP recovery without releasing its old
address, reassign the same address to prevent consuming free addresses
and moving away from the standard client address.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Save and restore all so far neglected KVM-specific CPU states. Handling
the TSC stabilizes migration in KVM mode. The interrupt_bitmap and
mp_state are currently unused, but will become relevant for in-kernel
irqchip support. By including proper saving/restoring already, we avoid
having to increment CPU_SAVE_VERSION later on once again.
v2:
- initialize mp_state runnable (for the boot CPU)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use standard callback with highest order to synchronize VCPU on reset
after all device callbacks were execute. This allows to remove the
special kvm hook in qemu_system_reset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add the parameter 'order' to qemu_register_reset and sort callbacks on
registration. On system reset, callbacks with lower order will be
invoked before those with higher order. Update all existing users to the
standard order 0.
Note: At least for x86, the existing users seem to assume that handlers
are called in their registration order. Therefore, the patch preserves
this property. If someone feels bored, (s)he could try to identify this
dependency and express it properly on callback registration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kvm_physical_sync_dirty_bitmap() takes the end address as second
argument, not the region size. Moverover, the kvm API should not be used
directly here, but cpu_physical_sync_dirty_bitmap().
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the missing hooks to allow live migration in KVM mode.
It adds proper synchronization before/after saving/restoring the VCPU
states (note: PPC is untested), hooks into
cpu_physical_memory_set_dirty_tracking() to enable dirty memory logging
at KVM level, and synchronizes that drity log into QEMU's view before
running ram_live_save().
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Extend kvm_physical_sync_dirty_bitmap() so that is can sync across
multiple slots. Useful for updating the whole dirty log during
migration. Moreover, properly pass down errors the whole call chain.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The buffer passed to KVM_GET_DIRTY_LOG requires one bit per page. Fix
the size calculation in kvm_physical_sync_dirty_bitmap accordingly,
avoiding allocation of extremly oversized buffers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce a global dirty logging flag that enforces logging for all
slots. This can be used by the live migration code to enable/disable
global logging withouth destroying the per-slot setting.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only apply the workaround for broken slot joining in KVM when the
capability was not found that signals the corresponding fix existence.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an option to specify the cluster size of a newly created qcow2 image.
Default is 4k which is the same value that was hard-coded before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is part two of the qemu-img conversion. This really works the same as the
previous conversion of qemu-img create: It introduces a new -o option for the
generic approach and adds the old-style options to this option set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch changes qemu-img to actually use the new bdrv_create interface. It
translates the old-style qemu-img options which have been bdrv_create2
parameters or flags so far to option structures. As the generic approach, it
introduces an -o option which accepts any parameter the driver knows.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now we can make use of the newly introduced option structures. Instead of
having bdrv_create carry more and more parameters (which are format specific in
most cases), just pass a option structure as defined by the driver itself.
bdrv_create2() contains an emulation of the old interface to simplify the
transition.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch creates a new header file and the corresponding implementation file
for parsing of parameter strings for options (like used in -drive). Part of
this is code moved from vl.c (so qemu-img can use it later).
The idea is to have a data structure describing all accepted parameters. When
parsing a parameter string, the structure is copied and filled with the
parameter values.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch allow us to call migrate_set_speed on running
migrations. This should allow mgmt tools to increase the allocated
bandwidth of a running migration if there is no progress, and they
really want the migration to succeed.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
