A very simple test to show VMSTATE_*_ARRAY usage and result. It could
be systematically extended to other primitives, but I leave that as an
exercise for others :).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132130.27141-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Unregister the fd handler before we destroy the channel,
otherwise we've got a race where we might land in the
fd handler just as we're closing the device.
(The race is quite data dependent, you just have to have
the right set of devices for it to trigger).
Corresponds to RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=1666601
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190122173111.29821-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In the current code, if process_incoming_migration_co() fails we do
the same error handing: set the error state, close the source file,
do the cleanup for multifd, and then exit(EXIT_FAILURE). To make the
code clearer, add a "goto fail" to unify the error handling.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190113140849.38339-6-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Call postcopy_ram_incoming_cleanup() to do the cleanup when
postcopy_ram_enable_notify fails. Besides, report the error
message when qemu_ram_foreach_migratable_block() fails.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190113140849.38339-5-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd_save_cleanup() takes an Error ** argument and returns an
error code even though it can't actually fail. Its callers
dutifully check for failure. Remove the useless argument and return
value, and simplify the callers.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190113140849.38339-4-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In our current code, when multifd is used during migration, if there
is an error before the destination receives all new channels, the
source keeps running, however the destination does not exit but keeps
waiting until the source is killed deliberately.
Fix this by dumping the specific error and let users decide whether
to quit from the destination side when failing to receive packet via
some channel. And update the comment for multifd_recv_new_channel().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190113140849.38339-3-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When qemu_signal_init() fails in qemu_init_main_loop(), we return
without setting an error. Its callers crash then when they try to
report the error with error_report_err().
To avoid such segmentation fault, add a new Error parameter to make
the call trace to propagate the err to the final caller.
Fixes: 2f78e491d7
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190113140849.38339-2-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This adds a rule to run all of our softfloat tests. It is included as
a pre-requisite to check-tcg and check-unit as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
We need these if we want to run unit/softfloat tests in our docker
containers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Wire up test/fp-test into the main testing Makefile. Currently we skip
some of the extF80 and f128 related tests. Once we re-factor and fix
these tests the plumbing should get simpler.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Clang v7.0.1 does not like the __int128 variable type for inline
assembly on s390x:
In file included from fpu/softfloat.c:97:
include/fpu/softfloat-macros.h:647:9: error: inline asm error:
This value type register class is not natively supported!
asm("dlgr %0, %1" : "+r"(n) : "r"(d));
^
Disable this code part there now when compiling with Clang, so that
the generic code gets used instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The added branch to the FMA ops is marked as unlikely and therefore
its impact on performance (measured with fp-bench) is within noise range
when measured on an Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We get HOST_WORDS_BIGENDIAN from config-host.h, but the include
is missing. Fix it.
This fixes `make check-softfloat' on big endian hosts.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
At this point random_ops[] only contains normals, so there's
no need to do anything to them. In fact, raising the exponent
here can make the output !normal, which is precisely
what the comment says we want to avoid.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The second test in the branches is wrong; fix while converting
to a switch statement, which is easier to get right.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add MicroBlaze CPU properties to enable exceptions on failed
bus accesses.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Create an unimplemented GPIO area instead of leaving it unassigned.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Switch the microblaze target from the old unassigned_access hook
to the transaction_failed hook.
The notable difference is that rather than it being called
for all physical memory accesses which fail (including
those made by DMA devices or by the gdbstub), it is only
called for those made by the CPU via its MMU. For
microblaze this makes no difference because none of the
target CPU code needs to make loads or stores by physical
address.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[EI: Add space in qemu_log()]
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
- Get rid of global_qtests in some more qtests
- typedef cleanups
- Fixes for compiling with Clang
- Force C standard to gnu99
- Don't use -nographic in qtests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=X/Yb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-01-22' into staging
- Use more CONFIG Makefile switches for qtests
- Get rid of global_qtests in some more qtests
- typedef cleanups
- Fixes for compiling with Clang
- Force C standard to gnu99
- Don't use -nographic in qtests
# gpg: Signature made Tue 22 Jan 2019 06:18:41 GMT
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-01-22: (26 commits)
tests: remove rule for nonexisting qdev-monitor-test
tests/hexloader-test: Don't pass -nographic to the QEMU under test
configure: Force the C standard to gnu99
seccomp: Work-around GCC 4.x bug in gnu99 mode
block: Work-around a bug in libiscsi 1.9.0 when used in gnu99 mode
linux-user: Fix compilation with clang 3.4
virtio-net: Fix VirtIONet typedef redefinition
ppc: Fix duplicated typedefs to be able to compile with Clang in gnu99 mode
ppc: Move spapr-related prototypes from xics.h into a seperate header file
ui/console: Remove PixelFormat from qemu/typedefs.h
ui/console: Remove MouseTransformInfo from qemu/typedefs.h
ui/console: Remove DisplayState/DisplaySurface from "qemu/typedefs.h"
ui/console: Remove QemuDmaBuf from "qemu/typedefs.h"
audio: Remove AudioState from "qemu/typedefs.h"
hw/i386: Remove PCMachineClass from "qemu/typedefs.h"
hw/char/serial: Remove SerialState from "qemu/typedefs.h"
hw/bt: Remove HCIInfo from "qemu/typedefs.h"
hw/i2c/smbus: Remove SMBusDevice from "qemu/typedefs.h"
hw/ide/ahci: Remove AllwinnerAHCIState from "qemu/typedefs.h"
hw/pcmcia: Remove PCMCIACardState from "qemu/typedefs.h"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
git shortlog ipxe-qemu-20170717-0600d3ae94-0..ipxe-qemu-20190122-de4565cbe7-0
-----------------------------------------------------------------------------
Aaron Young (1):
[libc] Fix strcmp()/strncmp() to return proper values
Ameer Mahagneh (1):
[golan] Set log_max_qp to 1
Bruce Rogers (1):
[build] Disable gcc stringop-truncation warnings
Christian Hesse (1):
[build] Handle R_X86_64_PLT32 from binutils 2.31
Hannes Reinecke (1):
[iscsi] Parse IPv6 address in root path
Heinrich Schuchardt (2):
[efi] Accept (and ignore) R_ARM_V4BX relocations
[efi] Add support for R_ARM_REL32 relocations
Ignat Korchagin (1):
[efi] Fix error handling path in efi_snp_probe
Janos Mattyasovszky (1):
[intel] Add PCI device ID for X550-T2
Joseph Wong (1):
[tg3] Add support for SerDes PHY initialization
Ladi Prosek (1):
[crypto] Fail fast if cross-certificate source is empty
Laurent Gourvénec (1):
[acpi] Compute and check checksum for ACPI tables
Martin Habets (2):
[netdevice] Make netdev_irq_enabled() independent of netdev_irq_supported()
[sfc] Add support for X25xx adapters
Michael Brown (88):
[efi] Enumerate PCI BARs in same order as SnpDxe
[build] Conditionalise use of -mabi=lp64 for ARM64 builds
[build] Fix use of inline assembly on GCC 4.8 ARM64 builds
[build] Fix ARM32 EFI builds with current EDK2 headers
[acpi] Fix spurious uninitialised-variable warning on some gcc versions
[hyperv] Do not steal ownership from the Gen 2 UEFI firmware
[shell] Enable "shell" command even when BANNER_TIMEOUT is zero
[romprefix] Avoid unaligned accesses within ROM headers
[malloc] Avoid false positive warnings from valgrind
[linux] Impose receive quota on tap driver
[efi] Raise TPL when calling UNDI entry point
[netdevice] Cancel all pending transmissions on any transmit error
[monojob] Check for job progress only once per timer tick
[job] Allow jobs to report an arbitrary status message
[downloader] Allow underlying downloads to provide detailed job progress
[monojob] Display job status message, if present
[peerdist] Gather and report peer statistics during download
[netdevice] Add "hwaddr" setting
[resolv] Use pass-through interfaces for name resolution multiplexer
[dns] Report current DNS query as job progress status message
[efi] Check buffer length for packets retrieved via our SNP protocol
[efi] Match behaviour of SnpDxe for truncated received packets
[dns] Ensure DNS names are NUL-terminated when used as diagnostic strings
[efi] Continue to connect remaining handles after connection errors
[build] Exclude selected directories from Secure Boot builds
[efi] Inhibit our driver Start() method during disconnection attempts
[efi] Allow for building with older versions of elf.h system header
[crypto] Fix endianness typo in comment
[crypto] Eliminate repetitions in MD5 round constant table
[crypto] Add MD4 message digest algorithm
[ntlm] Add support for NTLM authentication mechanism
[http] Gracefully handle offers of multiple authentication schemes
[http] Handle parsing of WWW-Authenticate header within authentication scheme
[http] Add support for NTLM authentication
[xen] Skip probing of any unsupported device types
[http] Include error messages for 4xx and 5xx response codes
[http] Report unsuccessful response status lines at DBGVL_LOG
[image] Omit URI query string and fragment from download progress messages
[legal] Add missing FILE_LICENCE declarations
[legal] Add missing FILE_LICENCE declarations
[build] Avoid use of "ld --oformat binary"
[ena] Add driver for Amazon ENA virtual function NIC
[skel] Remove MII interface
[ena] Fix spurious uninitialised variable warning on older versions of gcc
[xhci] Assume an invalid PSI table if any invalid PSI value is observed
[intel] Work around broken reset mechanism in i219 devices
[http] Allow for domain names within NTLM user names
[xhci] Consume event TRB before reporting completion to USB core
[efi] Run at TPL_CALLBACK to protect against UEFI timers
[efi] Raise TPL within EFI_SIMPLE_NETWORK_PROTOCOL entry points
[efi] Raise TPL within EFI_USB_IO_PROTOCOL entry points
[process] Include process name in debug messages
[efi] Drop to TPL_APPLICATION when gathering entropy
[efi] Raise TPL within EFI_DRIVER_BINDING_PROTOCOL entry points
[librm] Add facility to provide register and stack dump for CPU exceptions
[golan] Do not assume all devices are identical
[lacp] Mark link as blocked if partner is not yet up and running
[lacp] Fix debug message to match documentation
[tftp] Prevent potential division by zero
[profile] Prevent potential division by zero
[ocsp] Centralise test for whether or not an OCSP check is required
[ocsp] Allow OCSP checks to be disabled
[lacp] Check the partner's own state when checking for blocked links
[efi] Provide Map_Mem() and associated UNDI callbacks
[time] Add support for the ACPI power management timer
[rng] Use fixed-point calculations for min-entropy quantities
[build] Prevent use of MMX and SSE registers
[undi] Treat invalid IRQ numbers as non-fatal errors
[librm] Provide symbols for inline code placed into other sections
[librm] Ensure that inline code symbols are unique
[tls] Ensure received data list is initialised before calling tls_free()
[list] Add list_is_first_entry() and list_is_last_entry()
[tls] Rename tls_session to tls_connection
[tls] Ensure that window change is propagated to plainstream interface
[efi] Release SNP devices before starting SAN boot image
[efi] Do not raise TPL within EFI_DRIVER_BINDING_PROTOCOL.Supported()
[undi] Include subsystem IDs in broken interrupt device check
[rhine] Fix usage of mii_read()
[velocity] Fix usage of mii_read() and mii_write()
[mii] Separate concepts of MII interface and MII device
[tcp] Add missing packed attribute on struct tcp_header
[mii] Fix typo in parameter name
[http] Work around stateful authentication schemes
[build] Use positive-form tests when checking for supported warnings
[rndis] Clean up error handling path in register_rndis()
[ethernet] Use standard 1500 byte MTU unless explicitly overridden
[intelxl] Add driver for Intel 40 Gigabit Ethernet NICs
[zbin] Fix compiler warning with GCC 9
Peter von Konigsmark (2):
[exanic] Power up optical PHYs (if present)
[exanic] Add PCI device ID for another X40 variant
Petr Borsodi (3):
[pci] Correct invalid base-class/sub-class/prog-if order in PCIR
[util] Improve processing of ROM images in Option::ROM
[util] Add support for EFI ROM images
Richard Moore (1):
[intel] Add various PCI device IDs
Rob Taglang (3):
[intel] Add PCI_ROM entry for Intel i354 NIC
[intelx] Add PCI_ROM entry for Intel X553 NIC
[efi] Exclude link-layer header length from MaxPacketSize
Robin Smidsrød (1):
[util] Support reversed sort ordering when generating NIC list
Roman Kagan (2):
[rndis] Register netdev with MAC filled
[vmbus] Do not expect version in version_response
Steven Haber (1):
[intelx] Add support for Intel X552 NIC
Sylvie Barlow (3):
[mii] Add mii_find()
[mii] Add bit-bashing interface
[icplus] Add driver for IC+ network card
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This test was merged into drive_del-test in 2014.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Fixes: e2f3f22188 ("Merge of qdev-monitor-test, blockdev-test")
Signed-off-by: Thomas Huth <thuth@redhat.com>
The hexloader test invokes QEMU with the -nographic argument. This
is unnecessary, because the qtest_initf() function will pass it
-display none, which suffices to disable the graphical window.
It also means that the QEMU process will make the stdin/stdout
O_NONBLOCK. Since O_NONBLOCK is not per-file descriptor but per
"file description", this non-blocking behaviour is then shared
with any other process that's using the stdin/stdout of the
'make check' run, including make itself. This can result in make
falling over with "make: write error: stdout" because it got
an unexpected EINTR trying to write output messages to the terminal.
This is particularly noticable if running 'make check' in a loop with
while make check; do true; done
(It does not affect single make check runs so much because the
shell will remove the O_NONBLOCK status before it reads the
terminal for interactive input.)
Remove the unwanted -nographic argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Different versions of GCC and Clang use different versions of the C standard.
This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the
same level for all compilers. Since our minimum compiler versions is
GCC v4.8, our best option is "gnu99" for C code right now ("gnu17" is not
available there yet, and "gnu11" is marked as "experimental"), and "gnu++98"
for the few C++ code that we have in the repository.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We'd like to compile QEMU with -std=gnu99, but GCC 4.8 currently
fails to compile qemu-seccomp.c in this mode:
qemu-seccomp.c:45:1: error: initializer element is not constant
};
^
qemu-seccomp.c:45:1: error: (near initialization for ‘sched_setscheduler_arg[0]’)
This is due to a compiler bug which has just been fixed in GCC 5.0:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63567
Since we still want to support GCC 4.8 for a while and also want to use
gnu99 mode, work-around the issue by expanding the macro manually.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The header "scsi-lowlevel.h" of libiscsi 1.9.0 contains some bad
"inline" prototype definitions which GCC refuses to compile in its
gnu99 mode:
In file included from block/iscsi.c:52:0:
/usr/include/iscsi/scsi-lowlevel.h:810:13: error: inline function
‘scsi_set_uint16’ declared but never defined [-Werror]
inline void scsi_set_uint16(unsigned char *c, uint16_t val);
^
/usr/include/iscsi/scsi-lowlevel.h:809:13: error: inline function
‘scsi_set_uint32’ declared but never defined [-Werror]
inline void scsi_set_uint32(unsigned char *c, uint32_t val);
^
[...]
This has been fixed by upstream libiscsi in version 1.10.0 (see
https://github.com/sahlberg/libiscsi/commit/7692027d6c11 ), but
since we still want to support 1.9.0 for CentOS 7 / RHEL7, we
have to work-around the issue by redefining the "inline" keyword
to use the old "gnu89" mode behavior via "gnu_inline" instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang version 3.4.2 does not know the -Wpragmas option yet and bails
out with an error when we try to disable it in linux-user/qemu.h.
Fortunately, clang has a __has_warning() macro which allows us to add
an explicit check for the option that we want to ignore. With that we
can check for the availability of "-Waddress-of-packed-member" properly
and do not need the "-Wpragmas" at all here.
Fixes: 850d5e330a
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 2974e916df introduced the VirtioNetRscChain structure which
refer to a VirtIONet, declared later, thus required VirtIONet typedef
to use a forward declaration.
However, when compiling with Clang in -std=gnu99 mode, this triggers
the following warning/error:
CC hw/net/virtio-net.o
In file included from qemu/hw/net/virtio-net.c:22:
include/hw/virtio/virtio-net.h:189:3: error: redefinition of typedef 'VirtIONet' is a C11 feature [-Werror,-Wtypedef-redefinition]
} VirtIONet;
^
include/hw/virtio/virtio-net.h:110:26: note: previous definition is here
typedef struct VirtIONet VirtIONet;
^
1 error generated.
make: *** [rules.mak:69: hw/net/virtio-net.o] Error 1
Fix it by removing the duplicate typedef definition.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the ppc code with clang and -std=gnu99, there are a
couple of warnings/errors like this one:
CC ppc64-softmmu/hw/intc/xics.o
In file included from hw/intc/xics.c:35:
include/hw/ppc/xics.h:43:25: error: redefinition of typedef 'ICPState' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef struct ICPState ICPState;
^
target/ppc/cpu.h:1181:25: note: previous definition is here
typedef struct ICPState ICPState;
^
Work around the problems by including the proper headers in spapr.h
and by using struct forward declarations in cpu.h.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling with Clang in -std=gnu99 mode, there is a warning/error:
CC ppc64-softmmu/hw/intc/xics_spapr.o
In file included from /home/thuth/devel/qemu/hw/intc/xics_spapr.c:34:
/home/thuth/devel/qemu/include/hw/ppc/xics.h:203:34: error: redefinition of typedef 'sPAPRMachineState' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef struct sPAPRMachineState sPAPRMachineState;
^
/home/thuth/devel/qemu/include/hw/ppc/spapr_irq.h:25:34: note: previous definition is here
typedef struct sPAPRMachineState sPAPRMachineState;
^
We have to remove the duplicated typedef here and include "spapr.h" instead.
But "spapr.h" should not be included for the pnv machine files. So move
the spapr-related prototypes into a new file called "xics_spapr.h" instead.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Header files requiring PixelFormat already include "ui/qemu-pixman.h".
To clean "qemu/typedefs.h", move the declaration to "ui/qemu-pixman.h"
(removing the forward declaration).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Header files requiring MouseTransformInfo already include "ui/console.h".
To clean "qemu/typedefs.h", move the declaration to "ui/console.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring DisplayState/DisplaySurface already include "ui/console.h".
To clean "qemu/typedefs.h", move the declarations to "ui/console.h"
(removing DisplaySurface forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring QemuDmaBuf already include "ui/console.h".
To clean "qemu/typedefs.h", move the declaration to "ui/console.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring AudioState already include "audio_int.h".
To clean "qemu/typedefs.h", move the declaration to "audio_int.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring PCMachineClass already include "hw/i386/pc.h".
To clean "qemu/typedefs.h", move the declaration to "hw/i386/pc.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring SerialState already include "hw/char/serial.h".
To clean "qemu/typedefs.h", move the declaration to "hw/char/serial.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring HCIInfo already include "sysemu/bt.h".
To clean "qemu/typedefs.h", move the declaration to "sysemu/bt.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring SMBusDevice already include "hw/i2c/smbus.h".
To clean "qemu/typedefs.h", move the forward declaration
to "hw/i2c/smbus.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring AllwinnerAHCIState already include "hw/ide/ahci.h".
To clean "qemu/typedefs.h", move the declaration to "hw/ide/ahci.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is only one header file requiring this typedef (hw/arm/pxa.h),
let it include "hw/pcmcia.h" directly to simplify "qemu/typedefs.h".
To clean "qemu/typedefs.h", move the declaration to "hw/pcmcia.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[thuth: slightly tweaked commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
PS2State is only used in "hw/input/ps2.h", there is no
need to expose it via "qemu/typedefs.h".
To clean "qemu/typedefs.h", move the forward declaration
to "hw/input/ps2.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pass around the QTestState, so that we can finally get rid of the
out-of-favor global_qtest variable in this file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pass around the QTestState from function to function, so that we can finally
get rid of the out-of-favor global_qtest variable in this file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pass around the test state explicitly, to be able to use the qtest_in*()
and qtest_out*() function in this test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
