Commit Graph

34 Commits

Author SHA1 Message Date
Helge Deller
4a4554c6c5 hppa: Add support for an emulated TOC/NMI button.
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or
a BMC/GSP function to trigger a TOC.  TOC is a non-maskable interrupt that is
sent to the processor.  This can be used for diagnostic purposes like obtaining
a stack trace/register dump or to enter KDB/KGDB in Linux.

This patch adds support for such an emulated TOC button.

It wires up the qemu monitor "nmi" command to trigger a TOC.  For that it
provides the hppa_nmi function which is assigned to the nmi_monitor_handler
function pointer.  When called it raises the EXCP_TOC hardware interrupt in the
hppa_cpu_do_interrupt() function.  The interrupt function then calls the
architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address
0xf0000000).

According to the PA-RISC PDC specification, the SeaBIOS firmware then writes
the CPU registers into PIM (processor internal memmory) for later analysis.  In
order to write all registers it needs to know the contents of the CPU "shadow
registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are
provided by qemu in shadow registers when entering the SeaBIOS TOC function.
This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which
restores the original values of the shadow registers. With this opcode SeaBIOS
can store those registers as well into PIM before calling an OS-provided TOC
handler.

To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the
command "nmi".  After the TOC started the OS-debugger, exit the qemu monitor
with Ctrl-A C.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-02-02 18:46:42 +01:00
Richard Henderson
9f54dc1ce6 target/hppa: Fix atomic_store_3 for STBY
The parallel version of STBY did not take host endianness into
account, and also computed the incorrect address for STBY_E.

Bswap twice to handle the merge and store.  Compute mask inside
the function rather than as a parameter.  Force align the address,
rather than subtracting one.

Generalize the function to system mode by using probe_access().

Cc: qemu-stable@nongnu.org
Tested-by: Helge Deller <deller@gmx.de>
Reported-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-30 21:40:47 -08:00
Richard Henderson
3e8f1628e8 exec: Use cpu_untagged_addr in g2h; split out g2h_untagged
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created.  As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.

Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.

Use g2h_untagged on all pc values.  The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.

Use g2h with the cpu context on hand wherever possible.

Use g2h_untagged in lock_user, which will be updated soon.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16 11:04:53 +00:00
Chetan Pant
d6ea423635 overall/alpha tcg cpus|hppa: Fix Lesser GPL version number
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123353.19796-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-15 16:43:54 +01:00
Stefan Hajnoczi
d73415a315 qemu/atomic.h: rename atomic_ to qatomic_
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:

  $ CC=clang CXX=clang++ ./configure ... && make
  ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)

Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.

This patch was generated using:

  $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
    sort -u >/tmp/changed_identifiers
  $ for identifier in $(</tmp/changed_identifiers); do
        sed -i "s%\<$identifier\>%q$identifier%g" \
            $(git grep -I -l "\<$identifier\>")
    done

I manually fixed line-wrap issues and misaligned rST tables.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-23 16:07:44 +01:00
Richard Henderson
71bfd65c5f softfloat: Name compare relation enum
Give the previously unnamed enum a typedef name.  Use it in the
prototypes of compare functions.  Use it to hold the results
of the compare functions.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19 08:41:45 -07:00
Richard Henderson
b1af755c33 target/hppa: Allow, but diagnose, LDCW aligned only mod 4
The PA-RISC 1.1 specification says that LDCW must be aligned mod 16
or the operation is undefined.  However, real hardware only generates
an unaligned access trap for unaligned mod 4.

Match real hardware, but diagnose with GUEST_ERROR a violation of
the specification.

At the same time fix a bug in the initialization of mop, where the
size was specified twice, and another to free the zero temporary.

Tested-by: Helge Deller <deller@gmx.de>
Reported-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-27 10:49:51 -08:00
David Hildenbrand
200aa7a527 hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
We now have a variant for CONFIG_USER_ONLY as well.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190826075112.25637-7-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:34:18 -07:00
Markus Armbruster
54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Richard Henderson
25f327081b target/hppa: Use env_cpu, env_archcpu
Cleanup in the boilerplate that each target must define.
Replace hppa_env_get_cpu with env_archcpu.  The combination
CPU(hppa_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson
29a0af618d cpu: Replace ENV_GET_CPU with env_cpu
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Sven Schnelle
b06c0618c0 target/hppa: remove PSW I/R/Q bit check
HP ODE use rfi to set the Q bit, and i don't see anything in the
documentation that this is forbidden. So remove it.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-6-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12 09:13:43 -07:00
Sven Schnelle
23c3d569f4 target/hppa: add TLB trace events
To ease TLB debugging add a few trace events, which are disabled
by default so that there's no performance impact.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-5-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12 09:13:43 -07:00
Sven Schnelle
5010e5c4f4 target/hppa: move GETPC to HELPER() functions
When QEMU is compiled with -O0, these functions are inlined
which will cause a wrong restart address generated for the TB.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190211181907.2219-2-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12 08:59:21 -08:00
Sven Schnelle
68aa851aa2 target/hppa: fix PSW Q bit behaviour to match hardware
PA-RISC specification says: "Setting the PSW Q-bit, PSW{28}, to 1
with this instruction, if it was not already 1, is an undefined
operation." However, at least HP-UX 10.20 sets the Q bit from 0 to 1
with the SSM instruction. Tested this both on HP9000/712 and
HP9000/785/C3750, both machines set the Q bit from 0 to 1 without
exception. This makes HP-UX 10.20 progress a little bit further.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190129191402.29539-1-svens@stackframe.org>
[rth: Add a comment to the code as well.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-06 10:49:21 +00:00
Richard Henderson
e1cf9adf5b target/hppa: Remove floatX_maybe_silence_nan from conversions
This is now handled properly by the generic softfloat code.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Alex Bennée
24f91e81b6 target/*/cpu.h: remove softfloat.h
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.

As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[For PPC parts]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-21 10:20:24 +00:00
Richard Henderson
eed142195c target/hppa: Implement PROBE for system mode
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-31 05:30:50 -08:00
Helge Deller
6210db057a target/hppa: Implement halt and reset instructions
Real hardware would use an external device to control the power.
But for the moment let's invent instructions in reserved space,
to be used by our custom firmware.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-31 05:30:49 -08:00
Richard Henderson
2dfcca9ffc target/hppa: Implement LPA
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:22:26 -08:00
Richard Henderson
49c29d6c2e target/hppa: Implement the interval timer
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:22:26 -08:00
Richard Henderson
c301f34e79 target/hppa: Implement IASQ
Any one TB will have only one space value.  If we change spaces,
we change TBs.  Thus BE and BEV must exit the TB immediately.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
f49b3537cb target/hppa: Implement rfi
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
e1b5a5ed6f target/hppa: Implement the system mask instructions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
eaa3783b68 target/hppa: Split address size from register size
For system mode, we will need 64-bit virtual addresses even when
we have 32-bit register sizes.  Since the rest of QEMU equates
TARGET_LONG_BITS with the address size, redefine everything
related to register size in terms of a new TARGET_REGISTER_BITS.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
2986721df7 target/hppa: Define hardware exception types
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Helge Deller
813dff13bf target/hppa: Skeleton support for hppa-softmmu
With the addition of default-configs/hppa-softmmu.mak, this
will compile.  It is not enabled with this patch, however.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Laurent Vivier
98670d47cd accel/tcg: add size paremeter in tlb_fill()
The MC68040 MMU provides the size of the access that
triggers the page fault.

This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.

So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().

To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.

This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
2018-01-25 16:02:24 +01:00
Emilio G. Cota
f9f46db444 target/hppa: check CF_PARALLEL instead of parallel_cpus
Thereby decoupling the resulting translated code from the current state
of the system.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:41 -07:00
Richard Henderson
ebe9383cae target-hppa: Implement floating-point insns
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23 09:52:40 -08:00
Richard Henderson
98a9cb792c target-hppa: Implement system and memory-management insns
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23 09:52:40 -08:00
Richard Henderson
96d6407f36 target-hppa: Implement loads and stores
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23 09:52:40 -08:00
Richard Henderson
b2167459ae target-hppa: Implement basic arithmetic
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23 09:52:40 -08:00
Richard Henderson
61766fe9e2 target-hppa: Add framework and enable compilation
This is just about the minimum required to enable compilation
without actually executing any instructions.  This contains the
HPPACPU structure and the required callbacks, the gdbstub, the
basic translation loop, and a translate_one function that always
results in an illegal instruction.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23 09:52:40 -08:00