Convert the fixed-address IO_MEM_RAM, IO_MEM_ROM, IO_MEM_UNASSIGNED,
and IO_MEM_NOTDIRTY io handlers to MemoryRegions. These aren't real
regions, since they are never added to the memory hierarchy, but they
allow reuse of the dispatch functionality.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The code sometimes uses range comparisons on io indexes (e.g.
index =< IO_MEM_ROM). Avoid these as they make moving to objects harder.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
backend_registered was used to lazify the process of registering an
mmio region, since the it is different for the I/O address space and
the memory address space. However, it also makes registration dependent
on the region being visible in the address space. This is not the case
for "fake" regions, like watchpoints or IO_MEM_UNASSIGNED.
Remove backend_registered and always initialize the region. If it turns
out to be part of the I/O address space, we've wasted an I/O slot, but
that's not too bad. In any case this will be optimized later on.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently mmio access goes directly to the io_mem_{read,write} arrays.
In preparation for eliminating them, add indirection via a function.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Instead of doing device endianness compensation in cpu_register_io_memory(),
do it in the memory core.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The getter is no longer used, so it is completely removed.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently creating a memory region automatically registers it for
live migration. This differs from other state (which is enumerated
in a VMStateDescription structure) and ties the live migration code
into the memory core.
Decouple the two by introducing a separate API, vmstate_register_ram(),
for registering a RAM block for migration. Currently the same
implementation is reused, but later it can be moved into a separate list,
and registrations can be moved to VMStateDescription blocks.
Signed-off-by: Avi Kivity <avi@redhat.com>
This is a layering violation, but needed while the code contains
naked calls to qemu_get_ram_ptr() and the like.
Signed-off-by: Avi Kivity <avi@redhat.com>
Add an API that allows a client to observe changes in the global
memory map:
- region added (possibly with logging enabled)
- region removed (possibly with logging enabled)
- logging started on a region
- logging stopped on a region
- global logging started
- global logging removed
This API will eventually replace cpu_register_physical_memory_client().
Signed-off-by: Avi Kivity <avi@redhat.com>
Given an address space (represented by the top-level memory region),
returns the memory region that maps a given range. Useful for implementing
DMA.
The implementation is a simplistic binary search. Once we have a tree
representation this can be optimized.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently xen_ram_alloc() relies on ram_addr, which is going away.
Give it something else to use as a cookie.
Signed-off-by: Avi Kivity <avi@redhat.com>
The mutating memory APIs can easily cause empty transactions,
where the mutators don't actually change anything, or perhaps
only modify disabled regions. Detect these conditions and
avoid regenerating the memory topology.
Signed-off-by: Avi Kivity <avi@redhat.com>
Add an API to update an alias offset of an active alias. This can be
used to simplify implementation of dynamic memory banks.
Signed-off-by: Avi Kivity <avi@redhat.com>
This allows users to disable a memory region without removing
it from the hierarchy, simplifying the implementation of
memory routers.
Signed-off-by: Avi Kivity <avi@redhat.com>
MemoryRegionOps::valid tries to declaratively specify which transactions
are accepted by the device/bus, however it is not completely generic. Add
a callback for special cases.
Signed-off-by: Avi Kivity <avi@redhat.com>
'info mtree' accesses invalid memory in two cases, both due to incorrect
(and unsafe) usage of QTAILQ_FOREACH_SAFE().
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
As we register old portio regions via ioport_register, we are also
responsible for providing the word access wrapper.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a type and methods for manipulating a list of disjoint I/O ports,
used in some older hardware devices.
Based on original patch by Richard Henderson.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a monitor command 'info mtree' to show the memory hierarchy
much like /proc/iomem in Linux.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The property is inheritable, but only if set to true. This is so
that memory routers can mark sections of RAM as read-only via aliases.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of the offset property use the proper addr property to calculate
the offsets.
Additionally, be a little more verbose on the warning and print the
subregion name.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Avi Kivity <avi@redhat.com>
It is quite common to have a MemoryRegion with size of INT64_MAX.
When processing alias regions in render_memory_region() it's quite
easy to find a case where it will construct a temporary AddrRange with
a non-zero start, and size still of INT64_MAX. When means attempting
to compute the end of such a range as start + size will result in
signed integer overflow.
This integer overflow means that addrrange_intersects() can
incorrectly report regions as not intersecting when they do. For
example consider the case of address ranges {0x10000000000,
0x7fffffffffffffff} and {0x10010000000, 0x10000000} where the second
is in fact included completely in the first.
This patch rearranges addrrange_intersects() to avoid the integer
overflow, correcting this behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
Mask out the sub-page bits that are used by ROM device for storing the
io-index and the IO_MEM_ROMD flag.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When adding a rom_device in I/O mode, we incorrectly masked off the low
bits, resulting in a pure RAM map. Fix my masking off the high bits and
IO_MEM_ROMD, yielding a pure I/O map.
Signed-off-by: Avi Kivity <avi@redhat.com>
The legacy functions that we're wrapping expect that offset
to be included in the register. Indeed, they generally
expect the absolute address and then mask off the "high" bits.
The FDC is the first converted device with a non-zero offset.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
After 312b4234, the APIC and PCI devices are colliding with each other. This
is harmless in practice because the APIC accesses are special cased and never
make there way onto the bus.
Avi is working on a proper fix, but until that's ready, avoid printing the
warning.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The memory API supports cracking wide accesses into narrower ones
when needed; but this was no implemented for the pio address space,
causing lsi53c895a's IO BAR to malfunction.
Fix by correctly cracking wide accesses when needed.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The memory API automatically cracks large reads and writes into smaller
ones when needed. Factor out this mechanism, which is now duplicated between
memory reads and memory writes, into a function.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ROM/device regions act as mapped RAM for reads, can I/O memory for
writes. This allow emulation of flash devices.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When trying to map an alias of a ram region, where the alias starts at
address A and we map it into address B, and A > B, we had an arithmetic
underflow. Because we use unsigned arithmetic, the underflow converted
into a large number which failed addrrange_intersects() tests.
The concrete example which triggered this was cirrus vga mapping
the framebuffer at offsets 0xc0000-0xc7fff (relative to the start of
the framebuffer) into offsets 0xa0000 (relative to system addres space
start).
With our favorite analogy of a windowing system, this is equivalent to
dragging a subwindow off the left edge of the screen, and failing to clip
it into its parent window which is on screen.
Fix by switching to signed arithmetic.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a range is being unmapped, ask accelerators (e.g. kvm) to synchronize the
dirty bitmap to avoid losing information forever.
Fixes grub2 screen update.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow changes to the memory hierarchy to be accumulated and
made visible all at once. This reduces computational effort,
especially when an accelerator (e.g. kvm) is involved.
Useful when a single register update causes multiple changes
to an address space.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of adding and deleting regions in one pass, do a delete
pass followed by an add pass. This fixes the following case:
from:
0x0000-0x0fff ram (a1)
0x1000-0x1fff mmio (a2)
0x2000-0x2fff ram (a3)
to:
0x0000-0x2fff ram (b1)
The single pass algorithm removed a1, added b2, then removed a2 and a3,
which caused the wrong memory map to be built. The two pass algorithm
removes a1, a2, and a3, then adds b1.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As with the rest of the memory API, the caller associates an eventfd
with an address, and the memory API takes care of registering or
unregistering when the address is made visible or invisible to the
guest.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This eases the transition to the new API.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow registering I/O ports via the same mechanism as mmio ranges.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For non-RAM memory regions, we cannot tell whether this is an I/O region
or an MMIO region. Since the qemu backing registration is different for
the two, we have to defer initialization until we know which address
space we are in.
These shenanigans will be removed once the backing registration is unified
with the memory API.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I/O regions will not have ram_addrs, so this is a better name.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Prepare for multiple address space support by abstracting away the details
of registering a memory range with qemu's flat representation into an
AddressSpace object.
Note operations which are memory specific are not abstracted, since they will
never be called on I/O address spaces anyway.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
get_system_memory() provides the root of the memory hierarchy.
This interface is intended to be private between memory.c and exec.c.
If this file is included elsewhere, it should be regarded as a bug (or
TODO item). However, it will be temporarily needed for the conversion
to hierarchical memory routing.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Simple implementations of memory routers, for example the Cirrus VGA memory banks
or the 440FX PAM registers can generate adjacent memory regions which are contiguous.
Detect these and merge them; this saves kvm memory slots and shortens lookup times.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently dirty tracking is implemented by passing through
all calls to the underlying cpu_physical_memory_*() calls.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The memory API separates the attributes of a memory region (its size, how
reads or writes are handled, dirty logging, and coalescing) from where it
is mapped and whether it is enabled. This allows a device to configure
a memory region once, then hand it off to its parent bus to map it according
to the bus configuration.
Hierarchical registration also allows a device to compose a region out of
a number of sub-regions with different properties; for example some may be
RAM while others may be MMIO.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
