ui/cocoa needs to update the UI info and reset the keyboard state
tracker when switching the console, or the new console will see the
stale UI info or keyboard state. Previously, updating the UI info was
done with cocoa_switch(), but it is meant to be called when the surface
is being replaced, and may be called even when not switching the
console. ui/cocoa never reset the keyboard state, which resulted in
stuck keys.
Add ui/cocoa's own implementation of console_select(), which updates the
UI info and resets the keyboard state tracker.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-3-3fd6feef321a@daynix.com>
console_select() is shared by other displays and a console_select() call
from one of them triggers console switching also in ui/curses,
circumventing key state reinitialization that needs to be performed in
preparation and resulting in stuck keys.
Use its internal state to track the current active console to prevent
such a surprise console switch.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-2-3fd6feef321a@daynix.com>
A chardev-vc used to inherit the size of a graphic console when its
size not explicitly specified, but it often did not make sense. If a
chardev-vc is instantiated during the startup, the active graphic
console has no content at the time, so it will have the size of graphic
console placeholder, which contains no useful information. It's better
to have the standard size of text console instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-1-3fd6feef321a@daynix.com>
This fix solves the "failed to set up stack guard page" error that has been
reported on Linux hosts where the QEMU coroutine pool exceeds the
vm.max_map_count limit.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmX5qq0ACgkQnKSrs4Gr
c8ginQf8DRKzA7K8OivEegKpf0TgGcAcw9/xKc6zJH3X0/GXi1my61tzz+XUkbNy
/R9HRrjBUb4MhSmJzP9kxuPFcBD5fZeipg4eTqtJCdi+DQ57+YypShVpsDrD7eNv
X5dxeeONdWwP+k9JiOj9NtSOMmTKExn/Q/w45G2eeBlJh4yRA+56XN/dDXTFlidm
NEpOGrKbyFKuAf/ZwYmeBr4aqIGTN3UgOVco/rqkGPYPTYpKlCoE5rSTEnQrbR7/
C9KojlrGawJXlKjxfu/6i7yGHrv0eJ2N1VauvR/DHhQvdRhojVVt3NFGG/WJi+cL
CMbxNyYeQJLNFtfPWzokjKEudxkshg==
=lznr
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
This fix solves the "failed to set up stack guard page" error that has been
reported on Linux hosts where the QEMU coroutine pool exceeds the
vm.max_map_count limit.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmX5qq0ACgkQnKSrs4Gr
# c8ginQf8DRKzA7K8OivEegKpf0TgGcAcw9/xKc6zJH3X0/GXi1my61tzz+XUkbNy
# /R9HRrjBUb4MhSmJzP9kxuPFcBD5fZeipg4eTqtJCdi+DQ57+YypShVpsDrD7eNv
# X5dxeeONdWwP+k9JiOj9NtSOMmTKExn/Q/w45G2eeBlJh4yRA+56XN/dDXTFlidm
# NEpOGrKbyFKuAf/ZwYmeBr4aqIGTN3UgOVco/rqkGPYPTYpKlCoE5rSTEnQrbR7/
# C9KojlrGawJXlKjxfu/6i7yGHrv0eJ2N1VauvR/DHhQvdRhojVVt3NFGG/WJi+cL
# CMbxNyYeQJLNFtfPWzokjKEudxkshg==
# =lznr
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Mar 2024 15:09:33 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
coroutine: cap per-thread local pool size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The coroutine pool implementation can hit the Linux vm.max_map_count
limit, causing QEMU to abort with "failed to allocate memory for stack"
or "failed to set up stack guard page" during coroutine creation.
This happens because per-thread pools can grow to tens of thousands of
coroutines. Each coroutine causes 2 virtual memory areas to be created.
Eventually vm.max_map_count is reached and memory-related syscalls fail.
The per-thread pool sizes are non-uniform and depend on past coroutine
usage in each thread, so it's possible for one thread to have a large
pool while another thread's pool is empty.
Switch to a new coroutine pool implementation with a global pool that
grows to a maximum number of coroutines and per-thread local pools that
are capped at hardcoded small number of coroutines.
This approach does not leave large numbers of coroutines pooled in a
thread that may not use them again. In order to perform well it
amortizes the cost of global pool accesses by working in batches of
coroutines instead of individual coroutines.
The global pool is a list. Threads donate batches of coroutines to when
they have too many and take batches from when they have too few:
.-----------------------------------.
| Batch 1 | Batch 2 | Batch 3 | ... | global_pool
`-----------------------------------'
Each thread has up to 2 batches of coroutines:
.-------------------.
| Batch 1 | Batch 2 | per-thread local_pool (maximum 2 batches)
`-------------------'
The goal of this change is to reduce the excessive number of pooled
coroutines that cause QEMU to abort when vm.max_map_count is reached
without losing the performance of an adequately sized coroutine pool.
Here are virtio-blk disk I/O benchmark results:
RW BLKSIZE IODEPTH OLD NEW CHANGE
randread 4k 1 113725 117451 +3.3%
randread 4k 8 192968 198510 +2.9%
randread 4k 16 207138 209429 +1.1%
randread 4k 32 212399 215145 +1.3%
randread 4k 64 218319 221277 +1.4%
randread 128k 1 17587 17535 -0.3%
randread 128k 8 17614 17616 +0.0%
randread 128k 16 17608 17609 +0.0%
randread 128k 32 17552 17553 +0.0%
randread 128k 64 17484 17484 +0.0%
See files/{fio.sh,test.xml.j2} for the benchmark configuration:
https://gitlab.com/stefanha/virt-playbooks/-/tree/coroutine-pool-fix-sizing
Buglink: https://issues.redhat.com/browse/RHEL-28947
Reported-by: Sanjay Rao <srao@redhat.com>
Reported-by: Boaz Ben Shabat <bbenshab@redhat.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240318183429.1039340-1-stefanha@redhat.com>
* user device fixes for Aspeed and PowerNV machines
* coverity fix for iommufd
-----BEGIN PGP SIGNATURE-----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=zR3v
-----END PGP SIGNATURE-----
Merge tag 'pull-for-9.0-20240319' of https://github.com/legoater/qemu into staging
aspeed, pnv, vfio queue:
* user device fixes for Aspeed and PowerNV machines
* coverity fix for iommufd
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmX5mm0ACgkQUaNDx8/7
# 7KE/MQ/9GeX4yNBxY2iTATdmPXwjMw8AtKyfIQb605nIO0ch1Z98ywl5VMwCNohn
# ppY9L5bFpEASgRlFVm73X4DGxKyRGpRPqylsvINh0hKciRpmRkELHY3llhnXsd7P
# Q197pDtFr54FeX8j4+hSAu4paT97fPENlKn0J6lto2I1cXGcD1LYNDFhysoXdGme
# brJgo7KjQJZPZ560ZewskL5FWf3G9EkRjpqd8y0G5OtNmAPgAaahOMHhDCXan182
# J89I9CHI5xN45MRfAs8JamSaj/GyNsr4h04WhPa0+VZQ5vsaeW2Ekt4ypj+oAV+p
# wykhYzQk4ALZcmmph2flSAtLa7uheI+imyqubMthQCDj3G8onSQBMd5/4WRK6O49
# 0oE1DpPDEfhlJEQYxaYhOeqeA9iaP+w6V+yE+L5oGlMO66cR7GZsPu0x7kXailbH
# IoHw9mO+vMkpuyeP7M3hA8WRFCdFpf1Nn1Ao5Jz3KoiTyJWlIvX5VSaj12sjddQ2
# fU9SKu2Q5QqS5uQGakkY64EyUy7RkGIX6zY2NIscVe2lfAfKf3mZwu7OIuLjEy5O
# lRn35vWV8fOdRooKoDPTNcdBCaNPi+RApin8chOv5P+F+ie7+Twf9sb1AgH/pIcv
# HptvTXbvSFNbbdb+OE8a5qsqTvnrN8d31IXzrWRYsJB07x2IyoA=
# =zR3v
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Mar 2024 14:00:13 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-for-9.0-20240319' of https://github.com/legoater/qemu:
aspeed/smc: Only wire flash devices at reset
ppc/pnv: I2C controller is not user creatable
vfio/iommufd: Fix memory leak
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed machines have many Static Memory Controllers (SMC), up to
8, which can only drive flash memory devices. Commit 27a2c66c92
("aspeed/smc: Wire CS lines at reset") tried to ease the definitions
of these devices by allowing flash devices from the command line to be
attached to a SSI bus. For that, the wiring of the CS lines of the
Aspeed SMC controller was moved at reset. Two assumptions are made
though, first that the device has a SSI_GPIO_CS GPIO line, which is
not always the case, and second that it is a flash device.
Correct this problem by ensuring that the devices attached to the bus
are of the correct flash type. This fixes a QEMU abort when devices
without a CS line, such as the max111x, are passed on the command
line.
While at it, export TYPE_M25P80 used in the Xilinx Versal Virtual
machine.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2228
Fixes: 27a2c66c92 ("aspeed/smc: Wire CS lines at reset")
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
[ clg: minor fixes in the commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The I2C controller is a subunit of the processor. Make it so and avoid
QEMU crashes.
$ build/qemu-system-ppc64 -S -machine powernv9 -device pnv-i2c
qemu-system-ppc64: ../hw/ppc/pnv_i2c.c:521: pnv_i2c_realize: Assertion `i2c->chip' failed.
Aborted (core dumped)
Fixes: 263b81ee15 ("ppc/pnv: Add an I2C controller model")
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Coverity reported a memory leak on variable 'contents' in routine
iommufd_cdev_getfd(). Use g_autofree variables to simplify the exit
path and get rid of g_free() calls.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Liu <yi.l.liu@intel.com>
Fixes: CID 1540007
Fixes: 5ee3dc7af7 ("vfio/iommufd: Implement the iommufd backend")
Suggested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Some minor fixes plus a big patchset from Igor fixing
a regression with windows.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmX4NzsPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkp0H/1foAaDYrApMiIkji4aI94bq/fwTnu5CshNP
+YEzwJCS4qbl67/Ix2Z+xVz7twjQbgGdLd6hb9ZypAQfclUk5tDoKyCmqHtQMakX
T080FayOvWmUEostAw7MXvuz0HpJlgnJaJBn29l1hHjA/XXahKqcc705cup+W8hv
F7xb6AoFcbdETMzNaoqekNaHiiYyQPITY9p/UYPLzj2zyLsspR9kBebIeA1yhtXw
Tmc3+FMquoM2fMNxpwfhCBswg662MlOXhLN3dmyLqeJRl09x1GvaeJIGMY2MbefM
RMMv0/jqwAyii5HXew2rPIbLdULGq+hSjZo2NOlx3EOjTCaOkXc=
=XGMp
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: bugfixes
Some minor fixes plus a big patchset from Igor fixing
a regression with windows.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmX4NzsPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkp0H/1foAaDYrApMiIkji4aI94bq/fwTnu5CshNP
# +YEzwJCS4qbl67/Ix2Z+xVz7twjQbgGdLd6hb9ZypAQfclUk5tDoKyCmqHtQMakX
# T080FayOvWmUEostAw7MXvuz0HpJlgnJaJBn29l1hHjA/XXahKqcc705cup+W8hv
# F7xb6AoFcbdETMzNaoqekNaHiiYyQPITY9p/UYPLzj2zyLsspR9kBebIeA1yhtXw
# Tmc3+FMquoM2fMNxpwfhCBswg662MlOXhLN3dmyLqeJRl09x1GvaeJIGMY2MbefM
# RMMv0/jqwAyii5HXew2rPIbLdULGq+hSjZo2NOlx3EOjTCaOkXc=
# =XGMp
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 18 Mar 2024 12:44:43 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (24 commits)
smbios: add extra comments to smbios_get_table_legacy()
tests: acpi: update expected SSDT.dimmpxm blob
pc/q35: set SMBIOS entry point type to 'auto' by default
tests: acpi/smbios: whitelist expected blobs
smbios: error out when building type 4 table is not possible
smbios: in case of entry point is 'auto' try to build v2 tables 1st
smbios: extend smbios-entry-point-type with 'auto' value
smbios: clear smbios_type4_count before building tables
smbios: get rid of global smbios_ep_type
smbios: handle errors consistently
smbios: build legacy mode code only for 'pc' machine
smbios: rename/expose structures/bitmaps used by both legacy and modern code
smbios: add smbios_add_usr_blob_size() helper
smbios: don't check type4 structures in legacy mode
smbios: avoid mangling user provided tables
smbios: get rid of smbios_legacy global
smbios: get rid of smbios_smp_sockets global
smbios: cleanup smbios_get_tables() from legacy handling
tests: smbios: add test for legacy mode CLI options
tests: smbios: add test for -smbios type=11 option
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- mirror: Fix deadlock
- nbd/server: Fix race in draining the export
- qemu-img snapshot: Fix formatting with large values
- Fix blockdev-snapshot-sync error reporting for no medium
- iotests fixes
-----BEGIN PGP SIGNATURE-----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=+JIK
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- mirror: Fix deadlock
- nbd/server: Fix race in draining the export
- qemu-img snapshot: Fix formatting with large values
- Fix blockdev-snapshot-sync error reporting for no medium
- iotests fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmX4OG8RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9YdiQ//faXfGmbK6rBW4AkpwfrRM8SDHvm6hz7L
# 043ujAi3ziSXXoiec2/RK5wZ27nMJkfIrRHXpH41hgQvC6/3a4eIW6KSTaFV1PdG
# JtHCeopmVmgu7TZQ+kt/J6eLUTTLovoO94HgEfmxpr4CGZfx9RJftf2kCKILcYkh
# 9r04zSZLByVd4FJ5ZrqsFulWif5mXoGKdT/YisY3tKiCwFRWQDOoTymvJA012VtO
# MVmID593zwem3O3qtlGiGlK9qodBR4yof66xa/0gaYP98BZgv+LWnwLKha+OzSpX
# bQlxT26LY4JnSQkTdjF0QYnQiH4Q1kveUcNRZrGpA4iZxVDq1aks5DisThDwqoGG
# rhaPOWyJwJsonM1Enzim5Jd60JqvGdpTLjSA5oSyTjw62lAulnYihInERYSAFyyz
# UhQaO7qSog1//RpPEXEsiVkJBq8BE9l5I+L7+l5SCBhNr/UwZAOer/4m4X6d0SKN
# GEPRx0kH1voikzx7gIQs+Oldqvb0sg+zAvOynBxzpd+Ac6s8bFtWe+eSyWYL/ZGr
# Jg9+PL1xir/Uh7KmOnzt/iVBAmfSRpAo1O72xQXvHFYYtIP7hTkPO/vzqF206WMc
# WQFHHjfp5gVcMZ5AYg6txw+Bbtzu8g0AfB054lgnhihuShpf0E923TTDQFdV755s
# NUlrzuGu2fs=
# =+JIK
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 18 Mar 2024 12:49:51 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
iotests: adapt to output change for recently introduced 'detached header' field
tests/qemu-iotests: Restrict tests using "--blockdev file" to the file protocol
tests/qemu-iotests: Fix some tests that use --image-opts for other protocols
tests/qemu-iotests: Restrict tests that use --image-opts to the 'file' protocol
tests/qemu-iotests: Restrict test 156 to the 'file' protocol
tests/qemu-iotests: Restrict test 134 and 158 to the 'file' protocol
tests/qemu-iotests: Restrict test 130 to the 'file' protocol
tests/qemu-iotests: Restrict test 114 to the 'file' protocol
tests/qemu-iotests: Restrict test 066 to the 'file' protocol
tests/qemu-iotests: Fix test 033 for running with non-file protocols
qemu-img: Fix Column Width and Improve Formatting in snapshot list
blockdev: Fix blockdev-snapshot-sync error reporting for no medium
iotests: Add test for reset/AioContext switches with NBD exports
nbd/server: Fix race in draining the export
mirror: Don't call job_pause_point() under graph lock
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we *might* have user emulation with softmmu,
rename MAIN_SOFTMMU_TARGETS as MAIN_SYSTEM_TARGETS
to express 'system emulation targets'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240313213339.82071-3-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the unnecessary "Sparc" at the beginning of the line and
put the chip information into parentheses so that it is clearer
which part of the line have to be passed to "-cpu" to specify a
different CPU.
Message-ID: <20240307174334.130407-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
some users were confused by this message showing under TCG:
Selected CPU generation is too new. Maximum supported model
in the configuration: 'xyz'
Clarify that the maximum can depend on the accel, and add a
hint to try a different one.
Also add a hint for features mismatch to suggest trying
different accel, QEMU and kernel versions.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-ID: <20240314213746.27163-1-cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240314152302.2324164-22-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
address shift is caused by switch to 32-bit SMBIOS entry point
which has slightly different size from 64-bit one and happens
to trigger a bit different memory layout.
Expected diff:
- Name (MEMA, 0x07FFE000)
+ Name (MEMA, 0x07FFF000)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use smbios-entry-point-type='auto' for newer machine types as a workaround
for Windows not detecting SMBIOS tables. Which makes QEMU pick SMBIOS tables
based on configuration (with 2.x preferred and fallback to 3.x if the former
isn't compatible with configuration)
Default compat setting of smbios-entry-point-type after series
for pc/q35 machines:
* 9.0-newer: 'auto'
* 8.1-8.2: '64'
* 8.0-older: '32'
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2008
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-20-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-19-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If SMBIOS v2 version is requested but number of cores/threads
are more than it's possible to describe with v2, error out
instead of silently ignoring the fact and filling core/thread
count with bogus values.
This will help caller to decide if it should fallback to
SMBIOSv3 when smbios-entry-point-type='auto'
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU for some time now uses SMBIOS 3.0 for PC/Q35 machines by
default, however Windows has a bug in locating SMBIOS 3.0
entrypoint and fails to find tables when booted on SeaBIOS
(on UEFI SMBIOS 3.0 tables work fine since firmware hands
over tables in another way)
Missing SMBIOS tables may lead to some issues for guest
though (worst are: possible reactiveation, inability to
get virtio drivers from 'Windows Update')
It's unclear at this point if MS will fix the issue on their
side. So instead of it (or rather in addition) this patch
will try to workaround the issue.
aka, use smbios-entry-point-type=auto to make QEMU try
generating conservative SMBIOS 2.0 tables and if that
fails (due to limits/requested configuration) fallback
to SMBIOS 3.0 tables.
With this in place majority of users will use SMBIOS 2.0
tables which work fine with (Windows + legacy BIOS).
The configurations that is not to possible to describe
with SMBIOS 2.0 will switch automatically to SMBIOS 3.0
(which will trigger Windows bug but there is nothing
QEMU can do here, so go and aks Microsoft to real fix).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
later patches will use it to pick SMBIOS version at runtime
depending on configuration.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-16-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will help to keep type 4 tables accounting correct in case
SMBIOS tables are built multiple times.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-15-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current code uses mix of error_report()+exit(1)
and error_setg() to handle errors.
Use newer error_setg() everywhere, beside consistency
it will allow to detect error condition without killing
QEMU and attempt switch-over to SMBIOS3.x tables/entrypoint
in follow up patch.
while at it, clear smbios_tables pointer after freeing.
that will avoid double free if smbios_get_tables() is called
multiple times.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
basically moving code around without functional change.
And exposing some symbols so that they could be shared
between smbbios.c and new smbios_legacy.c
plus some meson magic to build smbios_legacy.c only
for 'pc' machine and otherwise replace it with stub
if not selected.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-12-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As a preparation to move legacy handling into a separate file,
add prefix 'smbios_' to type0/type1/have_binfile_bitmap/have_fields_bitmap
and expose them in smbios.h so that they can be reused in
legacy and modern code.
Doing it as a separate patch to avoid rename cluttering follow-up
patch which will move legacy code into a separate file.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will be used by follow up patch when legacy handling
is moved out into a separate file.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
legacy mode doesn't support structures of type 2 and more,
and CLI has a check for '-smbios type' option, however it's
still possible to sneak in type4 as a blob with '-smbios file'
option. However doing the later makes SMBIOS tables broken
since SeaBIOS doesn't expect that.
Rather than trying to add support for type4 to legacy code
(both QEMU and SeaBIOS), simplify smbios_get_table_legacy()
by dropping not relevant check in legacy code and error out
on type4 blob.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
currently smbios_entry_add() preserves internally '-smbios type='
options but tables provided with '-smbios file=' are stored directly
into blob that eventually will be exposed to VM. And then later
QEMU adds default/'-smbios type' entries on top into the same blob.
It makes impossible to generate tables more than once, hence
'immutable' guard was used.
Make it possible to regenerate final blob by storing user provided
blobs into a dedicated area (usr_blobs) and then copy it when
composing final blob. Which also makes handling of -smbios
options consistent.
As side effect of this and previous commits there is no need to
generate legacy smbios_entries at the time options are parsed.
Instead compose smbios_entries on demand from usr_blobs like
it is done for non-legacy SMBIOS tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
clean up smbios_set_defaults() which is reused by legacy
and non legacy machines from being aware of 'legacy' notion
and need to turn it off. And push legacy handling up to
PC machine code where it's relevant.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it makes smbios_validate_table() independent from
smbios_smp_sockets global, which in turn lets
smbios_get_tables() avoid using not related legacy code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
smbios_get_tables() bails out right away if leagacy mode is enabled
and won't generate any SMBIOS tables. At the same time x86 specific
fw_cfg_build_smbios() will genarate legacy tables and then proceed
to preparing temporary mem_array for useless call to
smbios_get_tables() and then discard it.
Drop legacy related check in smbios_get_tables() and return from
fw_cfg_build_smbios() early if legacy tables where built without
proceeding to non legacy part of the function.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unfortunately having 2.0 machine type deprecated is not enough
to get rid of legacy SMBIOS handling since 'isapc' also uses
that and it's staying around.
Hence add test for CLI options handling to be sure that it
ain't broken during SMBIOS code refactoring.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cureently it not possible to run SMBIOS test without ACPI one,
which gets into the way when testing ACPI-less configs.
Extract SMBIOS testing into separate routines that could also
be run without ACPI dependency and use that for testing SMBIOS.
As the 1st user add "acpi/piix4/smbios-options" test case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mention the fact that this event is not yet implemented
to avoid confusion.
As requested by Michael.
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240313-pvpanic-note-v1-1-7f2571cdaedc@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Failure was noticed when running the tests for the qcow2 image format.
Fixes: 0bd779e27e ("crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240216101415.293769-1-f.ebner@proxmox.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests that use "--blockdev" with the "file" driver cannot work with
other protocols, so we should mark them accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-10-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 263, 284 and detect-zeroes-registered-buf use qemu-io
with --image-opts so we have to enforce IMGOPTSSYNTAX=true here
to get $TEST_IMG in shape for other protocols than "file".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-9-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These tests 188, 189 and 198 use qemu-io with --image-opts with additional
hard-coded parameters for the file protocol, so they cannot work for other
protocols. Thus we have to limit these tests to the file protocol only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-8-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test fails completely when you try to use it with a different
protocol, e.g. with "./check -ssh -qcow2 156".
The test uses some hand-crafted JSON statements which cannot work with other
protocols, thus let's change this test to only support the 'file' protocol.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-7-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b25b387fa5 updated the iotests 134 and 158 to use the --image-opts
parameter for qemu-io with file protocol related options, but forgot to
update the _supported_proto line accordingly. So let's do that now.
Fixes: b25b387fa5 ("qcow2: convert QCow2 to use QCryptoBlock for encryption")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-6-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using "-drive ...,backing.file.filename=..." only works with the
file protocol, but not with URIs, so mark this test accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-5-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 114 uses "truncate" and the qcow2.py script on the destination file,
which both cannot deal with URIs. Thus this test needs the "file" protocol,
otherwise it fails with an error message like this:
truncate: cannot open 'ssh://127.0.0.1/tmp/qemu-build/tests/qemu-iotests/scratch/qcow2-ssh-114/t.qcow2.orig'
for writing: No such file or directory
Thus mark this test for "file protocol only" accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-4-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The hand-crafted json statement in this test only works if the test
is run with the "file" protocol, so mark this test accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-3-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running iotest 033 with the ssh protocol, it fails with:
033 fail [14:48:31] [14:48:41] 10.2s output mismatch
--- /.../tests/qemu-iotests/033.out
+++ /.../tests/qemu-iotests/scratch/qcow2-ssh-033/033.out.bad
@@ -174,6 +174,7 @@
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 512/512 bytes at offset 2097152
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-io: warning: Failed to truncate the tail of the image: ssh driver does not support shrinking files
read 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
We already check for the qcow2 format here, so let's simply also
add a check for the protocol here, too, to only test the truncation
with the file protocol.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-2-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
