While it is important we chase down the symlinks to copy the correct
data we can confuse the kernel by renaming the interpreter to what is
in the binary. Extend _copy_with_mkdir to preserve the original name
of the file when asked.
Fixes: 5e33f7fead ("tests/docker: better handle symlinked libs")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210202134001.25738-5-alex.bennee@linaro.org>
Depending on the linker/ldd setup we might get a file with no path.
Typically this is the psuedo library linux-vdso.so which doesn't
actually exist on the disk. Rather than try and catch these distro
specific edge cases just shout about it and try and continue.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210202134001.25738-4-alex.bennee@linaro.org>
To have the variable properly passed, we need to set it,
ie. NOUSER=1. Fix the message displayed by 'make docker'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210119052120.522069-1-f4bug@amsat.org>
Message-Id: <20210202134001.25738-3-alex.bennee@linaro.org>
Fix a variable rename mistake from commit 5e33f7fead:
Traceback (most recent call last):
File "./tests/docker/docker.py", line 710, in <module>
sys.exit(main())
File "./tests/docker/docker.py", line 706, in main
return args.cmdobj.run(args, argv)
File "./tests/docker/docker.py", line 489, in run
_copy_binary_with_libs(args.include_executable,
File "./tests/docker/docker.py", line 149, in _copy_binary_with_libs
libs = _get_so_libs(src)
File "./tests/docker/docker.py", line 123, in _get_so_libs
libs.append(s.group(1))
NameError: name 's' is not defined
Fixes: 5e33f7fead ("tests/docker: better handle symlinked libs")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210119050149.516910-1-f4bug@amsat.org>
Message-Id: <20210202134001.25738-2-alex.bennee@linaro.org>
Our gitlab-CI just showed a failed test_ppc_mac99 since it was apparently
killed some few seconds before the test finished. Allow it some more
time to complete.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210127065222.48650-1-thuth@redhat.com>
Fixes all over the place.
Ability to control ACPI OEM ID's.
Ability to control rom BAR size.
Removal of deprecated pc machine types.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmAdThgPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpZ2gH/R5W2mwmDv5RH8fanA8rdW0+BORmHaUbUXqN
YtfzQj14o+f+gpIPlGpi02ub26Q7t8XZbOW6DsoeNUTelu+P4kDcVhvBNgnl5ic1
rdM/jfjI87YcugGKjVNVbsEaDYYEiQaEiY/B21JFcrzAYHiOU+pfHQpFDipmXy0a
st4uLG31/6SVlwhdnYWBQpgDioOpP40KTQz1fAsr0EIyyoIWPdCv3W410DoLP7lL
Hpe/9ByLTqBBhZHlGABEHFrryprs8ax7OEMZUhpwzFrP/jsLIgIdTEGqhjVNzGUn
xI8ePU6a0V6X5ZCRhmvIzmLyPVEOFTZlHlAdeWi1b2tkinN6m3E=
=ZKzx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio,pci: fixes, features,code removal
Fixes all over the place.
Ability to control ACPI OEM ID's.
Ability to control rom BAR size.
Removal of deprecated pc machine types.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 05 Feb 2021 13:54:32 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
tests/acpi: disallow updates for expected data files
tests/acpi: update expected data files
tests/acpi: add OEM ID and OEM TABLE ID test
acpi: use constants as strncpy limit
acpi: Permit OEM ID and OEM table ID fields to be changed
tests/acpi: allow updates for expected data files
vhost: Check for valid vdev in vhost_backend_handle_iotlb_msg
hw/virtio/virtio-balloon: Remove the "class" property
hw/i386: Remove the deprecated pc-1.x machine types
vhost: Unbreak SMMU and virtio-iommu on dev-iotlb support
virtio-pmem: add trace events
virtio: Add corresponding memory_listener_unregister to unrealize
virtio-mmio: fix guest kernel crash with SHM regions
virtio: move 'use-disabled-flag' property to hw_compat_4_2
pci: add romsize property
pci: reject too large ROMs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210119003216.17637-6-posteuca@mutex.one>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210119003216.17637-5-posteuca@mutex.one>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210119003216.17637-2-posteuca@mutex.one>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will check virtio/vhost-user-vga & virgl are correctly initialized
by the Linux kernel on an egl-headless display.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-21-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's better to pass &error_abort than just assert that result is 0: on
crash, we'll immediately see the reason in the backtrace.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix iotest 206 fallout]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit f93e19fb03 adjusted various iotest whitespace discrepancies.
But another one snuck in during 61623f8215, and we missed the
semantic merge conflict at the time because 185 is not run as part of
the default 'make check'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210202185914.614705-1-eblake@redhat.com>
[eblake: adjust commit message]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
For -makecheck, the old 'check' implementation skipped the output when
starting a test. It only had the condensed output at the end of a test.
testrunner.py prints the normal output when starting a test even for
-makecheck. This output contains '\r' at the end so that it can be
overwritten with the result at the end of the test. However, for
-makecheck this is shorter output in a different format, so effectively
we end up with garbled output that mixes both output forms.
Revert to the old behaviour of only printing a message after the test
had completed in -makecheck mode.
Fixes: d74c754c92
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210201161024.127921-1-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should indicate failure by exit code, not only output.
Reported-by: Peter Maydell
Fixes: f203080bbd
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210201085041.3079-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the qemu-system-{arch} binary for the host architecture can't be
found, the old 'check' implementation selected the alphabetically first
system emulator binary that it could find. The new Python implementation
just uses the first result of glob.iglob(), which has an undefined
order.
This is a problem that breaks CI because the iotests aren't actually
prepared to run on any emulator. They should be, so this is really a bug
in the failing test cases that should be fixed there, but as a quick
fix, let's revert to the old behaviour to let CI runs succeed again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210202142802.119999-1-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ignore two complains, which now lead to 297 failure on testenv.py and
testrunner.py.
Fixes: 2e5a2f57db
Fixes: d74c754c92
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129161323.615027-1-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
-----BEGIN PGP SIGNATURE-----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=g6bC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging
* Replace --enable/disable-git-update with --with-git-submodules
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
# gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
tests: Replace deprecated ASN1 code
tests: Fix runtime error in test-authz-pam
ui: update keycodemapdb submodule commit
crypto: Add spaces around operator
configure: replace --enable/disable-git-update with --with-git-submodules
docs: fix missing backslash in certtool shell example
docs: simplify and clarify the platform support rules
Prefer 'on' | 'off' over 'yes' | 'no' for bool options
os: deprecate the -enable-fips option and QEMU's FIPS enforcement
crypto: Fix memory leaks in set_loaded for tls-*
crypto: Forbid broken unloading of secrets
crypto: Move USER_CREATABLE to secret_common base class
crypto: Fix some code style problems, add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes several compiler warnings on MacOS with Homebrew. The
git development branch for forthcoming libtasn1 4.17.0 has introduced
deprecation warnings for several macros/types that we use.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A test with sanitizers on macOS shows this error:
authz/pamacct.c:50:25: runtime error: null pointer passed as argument 1, which is declared to never be null
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/security/pam_appl.h:56:2: note: nonnull attribute specified here
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Update some docs and test cases to use 'on' | 'off' as the preferred
value for bool options.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the CMSDK APB watchdog uses its Clock input, it will
correctly respond when the system clock frequency is changed using
the RCC register on in the Stellaris board system registers. Test
that when the RCC register is written it causes the watchdog timer to
change speed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-22-peter.maydell@linaro.org
Message-id: 20210121190622.22000-22-peter.maydell@linaro.org
Add a simple test of the CMSDK dual timer, since we're about to do
some refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210128114145.20536-6-peter.maydell@linaro.org
Message-id: 20210121190622.22000-6-peter.maydell@linaro.org
Add a simple test of the CMSDK watchdog, since we're about to do some
refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-5-peter.maydell@linaro.org
Message-id: 20210121190622.22000-5-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a simple test of the CMSDK APB timer, since we're about to do
some refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-4-peter.maydell@linaro.org
Message-id: 20210121190622.22000-4-peter.maydell@linaro.org
check-block.sh called by make check-block rely on PYTHON variable being
set.
Fixes: f203080bbd
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129051346.56109-1-vsementsov@virtuozzo.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should drop final '\n' before comparing with python3 shebang.
Fixes: d74c754c92
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129090616.84145-1-vsementsov@virtuozzo.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test case for pvpanic-pci device. The scenario is the same as pvpanic
ISA device, but is using the PCI bus.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
[PMM: added code to free dev and pcibus, which the oss-fuzz
build otherwise complains about as a leak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To ease the PCI device addition in next patches, split the code as follows:
- generic code (read/write/setup) is being kept in pvpanic.c
- ISA dependent code moved to pvpanic-isa.c
Also, rename:
- ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE.
- TYPE_PVPANIC -> TYPE_PVPANIC_ISA.
- MemoryRegion io -> mr.
- pvpanic_ioport_* in pvpanic_*.
Update the build system with the new files and config structure.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix potential overflow problem when calculating pwm_duty.
1. Ensure p->cmr and p->cnr to be from [0,65535], according to the
hardware specification.
2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1)
can excceed UINT32_MAX, we convert them to uint64_t in computation
and converted them back to uint32_t.
(duty is guaranteed to be <= MAX_DUTY so it won't overflow.)
Fixes: CID 1442342
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Doug Evans <dje@google.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210127011142.2122790-1-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The properties to attach a CANBUS object to the xlnx-zcu102 machine have
a period in them. We want to use periods in properties for compound QAPI types,
and besides the "xlnx-zcu102." prefix is both unnecessary and different
from any other machine property name. Remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210118162537.779542-1-pbonzini@redhat.com
Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
-----BEGIN PGP SIGNATURE-----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=gFsg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
# gpg: Signature made Wed 27 Jan 2021 19:56:00 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: rename and move 169 and 199 tests
iotests: rewrite check into python
iotests: add testrunner.py
iotests: add testenv.py
iotests: add findtests.py
iotests: 146: drop extra whitespaces from .out file
virtio-scsi-test: Test writing to scsi-cd device
block: Separate blk_is_writable() and blk_supports_write_perm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename bitmaps migration tests and move them to tests subdirectory to
demonstrate new human-friendly test naming.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just use classes introduced in previous three commits. Behavior
difference is described in these three commits.
Drop group file, as it becomes unused.
Drop common.env: now check is in python, and for tests we use same
python interpreter that runs the check itself. Use build environment
PYTHON in check-block instead, to keep "make check" use the same
python.
Checking for virtio-blk moved to iotests.py, as it actually iotests.py
dependency. Actually not all python iotests depend on it, so in future
it may be refactored to checked only when really needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add TestRunner class, which will run tests in a new python iotests
running framework.
There are some differences with current ./check behavior, most
significant are:
- Consider all tests self-executable, just run them, don't run python
by hand.
- Elapsed time is cached in json file
- Elapsed time precision increased a bit
- Instead of using "diff -w" which ignores all whitespace differences,
manually strip whitespace at line end then use python difflib, which
no longer ignores spacing mid-line
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add TestEnv class, which will handle test environment in a new python
iotests running framework.
Don't add compat=1.1 for qcow2 IMGOPTS, as v3 is default anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add python script with new logic of searching for tests:
Current ./check behavior:
- tests are named [0-9][0-9][0-9]
- tests must be registered in group file (even if test doesn't belong
to any group, like 142)
Behavior of findtests.py:
- group file is dropped
- tests are all files in tests/ subdirectory (except for .out files),
so it's not needed more to "register the test", just create it with
appropriate name in tests/ subdirectory. Old names like
[0-9][0-9][0-9] (in root iotests directory) are supported too, but
not recommended for new tests
- groups are parsed from '# group: ' line inside test files
- optional file group.local may be used to define some additional
groups for downstreams
- 'disabled' group is used to temporary disable tests. So instead of
commenting tests in old 'group' file you now can add them to
disabled group with help of 'group.local' file
- selecting test ranges like 5-15 are not supported more
(to support restarting failed ./check command from the middle of the
process, new argument is added: --start-from)
Benefits:
- no rebase conflicts in group file on patch porting from branch to
branch
- no conflicts in upstream, when different series want to occupy same
test number
- meaningful names for test files
For example, with digital number, when some person wants to add some
test about block-stream, he most probably will just create a new
test. But if there would be test-block-stream test already, he will
at first look at it and may be just add a test-case into it.
And anyway meaningful names are better.
This commit doesn't update check behavior (which will be done in
further commit), still, the documentation changed like new behavior is
already here. Let's live with this small inconsistency for the
following few commits, until final change.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210125185056.129513-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
check script will be stricter soon about whitespaces, so fix 146.out
now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that trying to write to a (read-only) scsi-cd device backed
by a read-write image file doesn't crash and results in the correct
error.
This is a regression test for https://bugs.launchpad.net/bugs/1906693.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210118123448.307825-3-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Documentation for the decorators in the "acceptance" tests
* One small rework of a libqtest function
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmARBpMRHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbXrmg//ap1z2taLpgUdMVxImdMieqsfzSxMUt75
vkmQvk+rquK8VqwVKGaMsps7aANXDFD2etjAx0zp/9uS6OApNRegRFNb5eOr2oUR
RBhnNYkabmAvabn7lFmb2FZ84cCA3c3rY0JsZ44eYcdOOQVLuKMH6//m7gPztmkA
BNYh8riAmOTVjL81cJVmA/hKUO7P1eR2+604gRr4t7mP9/I72QG3f12o062c+dWA
xXNK8gtqSjgfofZeqU8HYHkJoyi/3N6aGHE4XmojPbE0fzj1gjxlHm0LpIhrpwbI
hxkj3fwVh2e89dhMXCYhFKrYjUEQuJPUdLmMRl2KcD9AmNFtM3S+WSi6SX8m9CXR
FBYpz5zOk7HHDZKJZ17U0xr5NZ8E0iULc0uLAVm5BqkmiT3DqjaWb0JYe/4rUT7Y
XxOX7MHA5AByRfv6IBfKCmRPUXM16W4tvWYHsCzU7ViV7eOxNLl4yY+3YvyfigHf
5MENOAkr3kdL54sDOsARCLs8D6zyXyKyspt13SAoRg7cGxS3WpSKYVKxYeX+VXbs
S/mUoKFT1IE8PkiDnQzw5PypPxgc3700AlrIAk9ZQiWol5tfq8QKBf4a9LSpV5Uu
02OlI3ufkdZwALgw9ZJNsSR0hX/rcALwOxlQ4kBcWsT45kxwch0337H+U6bUVnca
AJpJfDzlXI0=
=CNCA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2021-01-27' into staging
* Patches to speed up and improve the gitlab-CI
* Documentation for the decorators in the "acceptance" tests
* One small rework of a libqtest function
# gpg: Signature made Wed 27 Jan 2021 06:22:11 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2021-01-27:
libqtest: Rework qtest_rsp()
docs/devel: Explain how acceptance tests can be skipped
gitlab-ci.yml: Avoid recompiling the sources in the test jobs
gitlab-ci.yml: Exclude some redundant targets in build-without-default-features
meson: Do not build optional libraries by default
configure: Only check for audio drivers if system-mode is selected
gitlab-ci.yml: Avoid some submodules to speed up the CI a little bit
gitlab-ci: Test building linux-user targets on CentOS 7
tests/docker: Install static libc package in CentOS 7
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qtest_rsp() is used in two different ways: (1) return some arguments
to caller, which the caller must free, and (2) return no arguments to
caller. Passing non-zero @expected_args gets you (1), and passing
zero gets you (2).
Having "the return value must be freed" depend on an argument this way
is less than ideal.
Provide separate functions for the two ways: (1) qtest_rsp_args()
takes @expected_args (possibly zero), and returns that number of
arguments. Caller must free the return value always. (2) qtest_rsp()
assumes zero, and returns nothing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210126151649.2220902-1-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the meson build system rework, the configure script prefers the
git submodules over the system libraries. So we are testing compilation
with capstone, fdt and libslirp as a submodule all over the place,
burning CPU cycles by recompiling these third party modules and wasting
some network bandwidth in the CI by cloning the submodules each time.
Let's stop doing that in at least a couple of jobs and use the system
libraries instead.
While we're at it, also install meson in the Fedora container, since
it is new enough already, so we do not need to check out the meson
submodule here.
Message-Id: <20210121174451.658924-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We need to install the static libc package to be able to run
the TCG tests:
$ make check-tcg
...
BUILD TCG tests for x86_64-softmmu
BUILD x86_64-softmmu guest-tests with cc
/usr/bin/ld: hello: warning: allocated section `.notes' not in segment
/usr/bin/ld: memory: warning: allocated section `.notes' not in segment
BUILD TCG tests for x86_64-linux-user
BUILD x86_64-linux-user guest-tests with cc
/usr/bin/ld: cannot find -lpthread
/usr/bin/ld: cannot find -lc
collect2: error: ld returned 1 exit status
make[2]: *** [threadcount] Error 1
make[1]: *** [cross-build-guest-tests] Error 2
make: *** [build-tcg-tests-x86_64-linux-user] Error 2
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210121172829.1643620-2-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ccd3b3b811 has deprecated short-hand boolean options (i.e., options
with values). All options without values are interpreted as boolean
options, so this includes the invalid option "snapshot.foo" used in
iotest 178.
So after ccd3b3b811, 178 fails with:
+qemu-img: warning: short-form boolean option 'snapshot.foo' deprecated
+Please use snapshot.foo=on instead
Suppress that deprecation warning by passing some value to it (it does
not matter which, because the option is invalid anyway).
Fixes: ccd3b3b811
("qemu-option: warn for short-form boolean options")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210126123834.115915-1-mreitz@redhat.com>
Commit 0afec75734 removed the 'change' QMP command, so we can no
longer test it in 118.
Fixes: 0afec75734
('qmp: remove deprecated "change" command')
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210126104833.57026-1-mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Iotest 257 dumps a lot of in-progress information of backup job, such
as offset and bitmap dirtiness. Further commit will move backup to be
one block-copy call, which will introduce async parallel requests
instead of plain cluster-by-cluster copying. To keep things
deterministic, allow only one worker (only one copy request at a time)
for this test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-15-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The further change of moving backup to be a one block-copy call will
make copying chunk-size and cluster-size two separate things. So, even
with 64k cluster sized qcow2 image, default chunk would be 1M.
Test 219 depends on specified chunk-size. Update it for explicit
chunk-size for backup as for mirror.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-14-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The further change of moving backup to be a one block-copy call will
make copying chunk-size and cluster-size two separate things. So, even
with 64k cluster sized qcow2 image, default chunk would be 1M.
185 test however assumes, that with speed limited to 64K, one iteration
would result in offset=64K. It will change, as first iteration would
result in offset=1M independently of speed.
So, let's explicitly specify, what test wants: set max-chunk to 64K, so
that one iteration is 64K. Note, that we don't need to limit
max-workers, as block-copy rate limiter will handle the situation and
wouldn't start new workers when speed limit is obviously reached.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-13-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Right now, this does not change anything, because backup ignores
max-chunk and max-workers. However, as soon as backup is switched over
to block-copy for the background copying process, we will need it to
keep 129 passing.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210120102043.28346-1-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
After introducing parallel async copy requests instead of plain
cluster-by-cluster copying loop, we'll have to wait for paused status,
as we need to wait for several parallel request. So, let's gently wait
instead of just asserting that job already paused.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-12-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If main job coroutine called job_yield (while some background process
is in progress), we should give it a chance to call job_pause_point().
It will be used in backup, when moved on async block-copy.
Note, that job_user_pause is not enough: we want to handle
child_job_drained_begin() as well, which call job_pause().
Still, if job is already in job_do_yield() in job_pause_point() we
should not enter it.
iotest 109 output is modified: on stop we do bdrv_drain_all() which now
triggers job pause immediately (and pause after ready is standby).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210116214705.822267-10-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
And consequentially drop it from 297's skip list.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-11-mreitz@redhat.com>
And consequentially drop it from 297's skip list.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210118105720.14824-10-mreitz@redhat.com>
Issuing 'stop' on the VM drains all nodes. If the mirror job has many
large requests in flight, this may lead to significant I/O that looks a
bit like 'stop' would make the job try to complete (which is what 129
should verify not to happen).
We can limit the I/O in flight by limiting the buffer size, so mirror
will make very little progress during the 'stop' drain.
(We do not need to do anything about commit, which has a buffer size of
512 kB by default; or backup, which goes cluster by cluster. Once we
have asynchronous requests for backup, that will change, but then we can
fine-tune the backup job to only perform a single request on a very
small chunk, too.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-9-mreitz@redhat.com>
Before this patch, test_block_commit() performs an active commit, which
under the hood is a mirror job. If we want to test various different
block jobs, we should perhaps run an actual commit job instead.
Doing so requires adding an overlay above the source node before the
commit is done (and then specifying the source node as the top node for
the commit job).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-8-mreitz@redhat.com>
Throttling on the BB has not affected block jobs in a while, so it is
possible that one of the jobs in 129 finishes before the VM is stopped.
We can fix that by running the job from a throttle node.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-7-mreitz@redhat.com>
@busy is false when the job is paused, which happens all the time
because that is how jobs yield (e.g. for mirror at least since commit
565ac01f8d).
Back when 129 was added (2015), perhaps there was no better way of
checking whether the job was still actually running. Now we have the
@status field (as of 58b295ba52, i.e. 2018), which can give us exactly
that information.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-6-mreitz@redhat.com>
Instead of checking iotests.py only, check all Python files in the
qemu-iotests/ directory. Of course, most of them do not pass, so there
is an extensive skip list for now. (The only files that do pass are
209, 254, 283, and iotests.py.)
(Alternatively, we could have the opposite, i.e. an explicit list of
files that we do want to check, but I think it is better to check files
by default.)
Unless started in debug mode (./check -d), the output has no information
on which files are tested, so we will not have a problem e.g. with
backports, where some files may be missing when compared to upstream.
Besides the technical rewrite, some more things are changed:
- For the pylint invocation, PYTHONPATH is adjusted. This mirrors
setting MYPYPATH for mypy.
- Also, MYPYPATH is now derived from PYTHONPATH, so that we include
paths set by the environment. Maybe at some point we want to let the
check script add '../../python/' to PYTHONPATH so that iotests.py does
not need to do that.
- Passing --notes=FIXME,XXX to pylint suppresses warnings for TODO
comments. TODO is fine, we do not need 297 to complain about such
comments.
- The "Success" line from mypy's output is suppressed, because (A) it
does not add useful information, and (B) it would leak information
about the files having been tested to the reference output, which we
decidedly do not want.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210118105720.14824-3-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
There are a couple of environment variables that we fetch with
os.environ.get() without supplying a default. Clearly they are required
and expected to be set by the ./check script (as evidenced by
execute_setup_common(), which checks for test_dir and
qemu_default_machine to be set, and aborts if they are not).
Using .get() this way has the disadvantage of returning an Optional[str]
type, which mypy will complain about when tests just assume these values
to be str.
Use [] instead, which raises a KeyError for environment variables that
are not set. When this exception is raised, catch it and move the abort
code from execute_setup_common() there.
Drop the 'assert iotests.sock_dir is not None' from iotest 300, because
that sort of thing is precisely what this patch wants to prevent.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-2-mreitz@redhat.com>
This patch completes the series with the COR-filter applied to
block-stream operations.
Adding the filter makes it possible in future implement discarding
copied regions in backing files during the block-stream job, to reduce
the disk overuse (we need control on permissions).
Also, the filter now is smart enough to do copy-on-read with specified
base, so we have benefit on guest reads even when doing block-stream of
the part of the backing chain.
Several iotests are slightly modified due to filter insertion.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216061703.70908-14-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
test_stream_parallel run parallel stream jobs, intersecting so that top
of one is base of another. It's OK now, but it would be a problem if
insert the filter, as one job will want to use another job's filter as
above_base node.
Correct thing to do is move to new interface: "bottom" argument instead
of base. This guarantees that jobs don't intersect by their actions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-12-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The test case #310 is similar to #216 by Max Reitz. The difference is
that the test #310 involves a bottom node to the COR filter driver.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: detach backing to test reads from top, limit to qcow2]
Message-Id: <20201216061703.70908-7-vsementsov@virtuozzo.com>
[mreitz: Add "# group:" line]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Unfortunately commit "iotests: handle tmpfs" breaks running iotests
with -nbd -nocache, as _check_o_direct tries to create
$TEST_IMG.test_o_direct, but in case of nbd TEST_IMG is something like
nbd+unix:///... , and test fails with message
qemu-img: nbd+unix:///?socket[...]test_o_direct: Protocol driver
'nbd' does not support image creation, and opening the image
failed: Failed to connect to '/tmp/tmp.[...]/nbd/test_o_direct': No
such file or directory
Use TEST_DIR instead.
Fixes: cfdca2b9f9
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201218182012.47607-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Options such as "server" or "nowait", that are commonly found in -chardev,
are sugar for "server=on" and "wait=off". This is quite surprising and
also does not have any notion of typing attached. It is even possible to
do "-device e1000,noid" and get a device with "id=off".
Deprecate it and print a warning when it is encountered. In general,
this short form for boolean options only seems to be in wide use for
-chardev and -spice.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- headers update to Linux 5.11-rc2
- fix tcg emulation for some instructions that are generated by
clang Linux kernel builds
- vfio-ccw: wire up the device unplug notification mechanism
- fix a gcc 11 warning
-----BEGIN PGP SIGNATURE-----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=lCNW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210121' into staging
s390x updates:
- headers update to Linux 5.11-rc2
- fix tcg emulation for some instructions that are generated by
clang Linux kernel builds
- vfio-ccw: wire up the device unplug notification mechanism
- fix a gcc 11 warning
# gpg: Signature made Thu 21 Jan 2021 12:08:12 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210121:
s390x: Use strpadcpy for copying vm name
vfio-ccw: Connect the device request notifier
Update linux headers to 5.11-rc2
update-linux-headers: Include const.h
s390x/tcg: Ignore register content if b1/b2 is zero when handling EXECUTE
tests/tcg/s390x: Fix EXRL tests
s390x/tcg: Don't ignore content in r0 when not specified via "b" or "x"
s390x/tcg: Fix RISBHG
s390x/tcg: Fix ALGSI
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- minor resource leak fixes in qemu-nbd
- ensure proper aio context when nbd server uses iothreads
- iotest refactorings in preparation for rewriting ./check to be more
flexible, and preparing for more nbd server reconnect features
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmAI5sMACgkQp6FrSiUn
Q2rmQwf+Jmlsn8s0tdeeOhv6mp8ZSyvr2/x1/daGHkzZqhoL7m/4kJLP4p/u8uTV
XzXyXt7MKvHKd8UvKB6VsN6z75RJvi7y8pKpOQA96t08hjWuAcVtivKnyZd6MTwj
zeKsmrE8LAuMjHvmsrtrmRqCSdaVeFPb3qC6bvJ+WEiXJIMiXybF7lccPvR7WWjR
2FcyraZJgnlKrQv1i8M1++Px5W14jhOacAMUNAdVzNiYpu4tq6PTk9giq1/GULCz
xVYGHqoTFYy7Slj7xKQJuOwGNLMwL+F9x7/6wRFhKxjutc0/Po1lSfbaNe8q147H
p9jtDT9/OuTlQf7qpqqyQnASABDgaA==
=XW+E
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-01-20' into staging
nbd patches for 2021-01-20
- minor resource leak fixes in qemu-nbd
- ensure proper aio context when nbd server uses iothreads
- iotest refactorings in preparation for rewriting ./check to be more
flexible, and preparing for more nbd server reconnect features
# gpg: Signature made Thu 21 Jan 2021 02:28:19 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2021-01-20:
iotests.py: qemu_io(): reuse qemu_tool_pipe_and_status()
iotests.py: fix qemu_tool_pipe_and_status()
iotests/264: fix style
iotests: define group in each iotest
iotests/294: add shebang line
iotests: make tests executable
iotests: fix some whitespaces in test output files
iotests/303: use dot slash for qcow2.py running
iotests/277: use dot slash for nbd-fault-injector.py running
nbd/server: Quiesce coroutines on context switch
block: Honor blk_set_aio_context() context requirements
qemu-nbd: Fix a memleak in nbd_client_thread()
qemu-nbd: Fix a memleak in qemu_nbd_client_list()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current EXRL tests crash on real machines: we must not use r0 as a base
register for trt/trtr, otherwise the content gets ignored. Also, we must
not use r0 for exrl, otherwise it gets ignored.
Let's use the "a" constraint so we get a general purpose register != r0.
For op2, we can simply specify a memory operand directly via "Q" (Memory
reference without index register and with short displacement).
Fixes: ad8c851d2e ("target/s390x: add EX support for TRT and TRTR")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210111163845.18148-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Just drop code duplication.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201130134024.19212-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu_img_args variable is unrelated here. We should print just args.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201130134024.19212-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Fix long line, extra import and one mypy complaint about incompatible
int and float.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201118180433.11931-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to drop group file. Define group in tests as a preparatory
step.
The patch is generated by
cd tests/qemu-iotests
grep '^[0-9]\{3\} ' group | while read line; do
file=$(awk '{print $1}' <<< "$line");
groups=$(sed -e 's/^... //' <<< "$line");
awk "NR==2{print \"# group: $groups\"}1" $file > tmp;
cat tmp > $file;
done
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
All other test files are executable. Fix these.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to be stricter about comparing test result with .out
files. So, fix some whitespaces now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If you run './check 303', check includes common.config which adjusts
$PATH to include '.' first, and therefore finds qcow2.py on PATH. But
if you run './303' directly, there is nothing to adjust PATH, and if
'.' is not already on your PATH by other means, the test fails because
the executable is not found. Adjust how we invoke the helper
executable to avoid needing a PATH search in the first place.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If you run './check 277', check includes common.config which adjusts
$PATH to include '.' first, and therefore finds nbd-fault-injector.py
on PATH. But if you run './277' directly, there is nothing to adjust
PATH, and if '.' is not already on your PATH by other means, the test
fails because the executable is not found. Adjust how we invoke the
helper executable to avoid needing a PATH search in the first place.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch fixes the following memory leak detected by asan:
Indirect leak of 560320 byte(s) in 136 object(s) allocated from:
#0 0x556b3b3f9b57 in calloc (/home/stefanb/tmp/qemu-tip/build/tests/qtest/tpm-crb-swtpm-test+0x23fb57)
#1 0x152b0e96b9b0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x589b0)
#2 0x556b3b588f61 in parse_object /home/stefanb/tmp/qemu-tip/build/../qobject/json-parser.c:318:12
#3 0x556b3b588f61 in parse_value /home/stefanb/tmp/qemu-tip/build/../qobject/json-parser.c:546:16
#4 0x556b3b5886e8 in json_parser_parse /home/stefanb/tmp/qemu-tip/build/../qobject/json-parser.c:580:14
#5 0x556b3b52ff4a in json_message_process_token /home/stefanb/tmp/qemu-tip/build/../qobject/json-streamer.c:92:12
#6 0x556b3b59896f in json_lexer_feed_char /home/stefanb/tmp/qemu-tip/build/../qobject/json-lexer.c:313:13
#7 0x556b3b598443 in json_lexer_feed /home/stefanb/tmp/qemu-tip/build/../qobject/json-lexer.c:350:9
#8 0x556b3b436c70 in qmp_fd_receive /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:614:9
#9 0x556b3b435871 in qtest_qmp_receive_dict /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:636:12
#10 0x556b3b435871 in qtest_qmp_receive /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:624:27
#11 0x556b3b435c59 in qtest_vqmp /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:715:12
#12 0x556b3b435c59 in qtest_qmp /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:756:16
#13 0x556b3b4328c7 in tpm_util_wait_for_migration_complete /home/stefanb/tmp/qemu-tip/build/../tests/qtest/tpm-util.c:245:15
#14 0x556b3b4333be in tpm_test_swtpm_migration_test /home/stefanb/tmp/qemu-tip/build/../tests/qtest/tpm-tests.c:117:5
#15 0x152b0e98e29d (/lib64/libglib-2.0.so.0+0x7b29d)
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210115204637.3332555-1-stefanb@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The pwm_qom_get function didn't free "response", which caused an indirect
memory leak. So use qobject_unref() to fix it.
ASAN shows memory leak stack:
Indirect leak of 74160000 byte(s) in 18000 object(s) allocated from:
#0 0x7f96e2f79d4e in __interceptor_calloc (/lib64/libasan.so.5+0x112d4e)
#1 0x7f96e2d98a50 in g_malloc0 (/lib64/libglib-2.0.so.0+0x55a50)
#2 0x556313112180 in qdict_new ../qobject/qdict.c:30
#3 0x556313115bca in parse_object ../qobject/json-parser.c:318
#4 0x556313117810 in parse_value ../qobject/json-parser.c:546
#5 0x556313117bda in json_parser_parse ../qobject/json-parser.c:580
#6 0x55631310fe67 in json_message_process_token ../qobject/json-streamer.c:92
#7 0x5563131210b7 in json_lexer_feed_char ../qobject/json-lexer.c:313
#8 0x556313121662 in json_lexer_feed ../qobject/json-lexer.c:350
#9 0x5563131101e9 in json_message_parser_feed ../qobject/json-streamer.c:121
#10 0x5563130cb81e in qmp_fd_receive ../tests/qtest/libqtest.c:614
#11 0x5563130cba2b in qtest_qmp_receive_dict ../tests/qtest/libqtest.c:636
#12 0x5563130cb939 in qtest_qmp_receive ../tests/qtest/libqtest.c:624
#13 0x5563130cbe0d in qtest_vqmp ../tests/qtest/libqtest.c:715
#14 0x5563130cc40f in qtest_qmp ../tests/qtest/libqtest.c:756
#15 0x5563130c5623 in pwm_qom_get ../tests/qtest/npcm7xx_pwm-test.c:180
#16 0x5563130c595e in pwm_get_duty ../tests/qtest/npcm7xx_pwm-test.c:210
#17 0x5563130c7529 in test_toggle ../tests/qtest/npcm7xx_pwm-test.c:447
Reported-by: Euler Robot <euler.robot@huawei.com>
Message-Id: <20210115075634.717909-1-ganqixin@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
BusyBox' sed reports itself as "This is not GNU sed version 4.0"
when being run with the --version parameter. However, the iotests
really need GNU sed, they do not work with the BusyBox version.
So let's make sure that we really have GNU sed and refuse to run
the tests with BusyBox' sed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210119134749.401311-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Alpine Linux[1] is a security-oriented, lightweight Linux distribution
based on musl libc and busybox.
It it popular among Docker guests and embedded applications.
Adding it to test against different libc.
[1]: https://alpinelinux.org/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210118063808.12471-9-jiaxun.yang@flygoat.com>
[thuth: Dropped some unnecessary packages, replaced build-base with its deps]
Signed-off-by: Thomas Huth <thuth@redhat.com>
As per POSIX specification of limits.h [1], OS libc may define
PAGE_SIZE in limits.h.
Self defined PAGE_SIZE is frequently used in tests, to prevent
collosion of definition, we give PAGE_SIZE definitons reasonable
prefixs.
[1]: https://pubs.opengroup.org/onlinepubs/7908799/xsh/limits.h.html
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210118063808.12471-7-jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The adc_qom_set function didn't free "response", which caused an indirect
memory leak. So use qobject_unref() to fix it.
ASAN shows memory leak stack:
Indirect leak of 593280 byte(s) in 144 object(s) allocated from:
#0 0x7f9a5e7e8d4e in __interceptor_calloc (/lib64/libasan.so.5+0x112d4e)
#1 0x7f9a5e607a50 in g_malloc0 (/lib64/libglib-2.0.so.0+0x55a50)
#2 0x55b1bebf636b in qdict_new ../qobject/qdict.c:30
#3 0x55b1bec09699 in parse_object ../qobject/json-parser.c:318
#4 0x55b1bec0b2df in parse_value ../qobject/json-parser.c:546
#5 0x55b1bec0b6a9 in json_parser_parse ../qobject/json-parser.c:580
#6 0x55b1bec060d1 in json_message_process_token ../qobject/json-streamer.c:92
#7 0x55b1bec16a12 in json_lexer_feed_char ../qobject/json-lexer.c:313
#8 0x55b1bec16fbd in json_lexer_feed ../qobject/json-lexer.c:350
#9 0x55b1bec06453 in json_message_parser_feed ../qobject/json-streamer.c:121
#10 0x55b1bebc2d51 in qmp_fd_receive ../tests/qtest/libqtest.c:614
#11 0x55b1bebc2f5e in qtest_qmp_receive_dict ../tests/qtest/libqtest.c:636
#12 0x55b1bebc2e6c in qtest_qmp_receive ../tests/qtest/libqtest.c:624
#13 0x55b1bebc3340 in qtest_vqmp ../tests/qtest/libqtest.c:715
#14 0x55b1bebc3942 in qtest_qmp ../tests/qtest/libqtest.c:756
#15 0x55b1bebbd64a in adc_qom_set ../tests/qtest/npcm7xx_adc-test.c:127
#16 0x55b1bebbd793 in adc_write_input ../tests/qtest/npcm7xx_adc-test.c:140
#17 0x55b1bebbdf92 in test_convert_external ../tests/qtest/npcm7xx_adc-test.c:246
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210118065627.79903-1-ganqixin@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- clean-ups to docker images
- drop duplicate jobs from shippable
- prettier tag generation (+gtags)
- generate browsable source tree
- more Travis->GitLab migrations
- fix checkpatch to deal with commits
- gate gdbstub tests on 8.3.1, expand tests
- support Xfer:auxv:read gdb packet
- better gdbstub cleanup
- use GDB's SVE register layout
- make arm-compat-semihosting common
- add riscv semihosting support
- add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmAFXkcACgkQ+9DbCVqe
KkSP7Af/YNU4dWFf/N9CwvKQTSoJmBrO77HXccOJyYDS62hA8eoh83HWNll+xMV7
GxJDwQs0GS8J3oqcq1DktGgTUkCNxUfbHROjI2YXfRzoWnl0PFHY+Z/qRsq+bRhX
C3CiNCS/nM/NW2Q+H6TAD1MnXkia11+hqFhXrBRKVDON83MSvm0AspS5RO5eVpxo
TUTOD1YND+tAPWi5xAN+NyDuvfoY3tG4S4/DFUrHQfpS7uaHY/4qe8gMmJczveeo
uzJln9M7+pV5cgUWwr1fgCkbSyGgra+KX3GNoLIGS34C88cKRXAp7ZF19A3wQpiy
LXljmOinLfKuJqeRGwcnt6f8GrTn7A==
=XR0h
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-180121-2' into staging
Testing, gdbstub and semihosting patches:
- clean-ups to docker images
- drop duplicate jobs from shippable
- prettier tag generation (+gtags)
- generate browsable source tree
- more Travis->GitLab migrations
- fix checkpatch to deal with commits
- gate gdbstub tests on 8.3.1, expand tests
- support Xfer:auxv:read gdb packet
- better gdbstub cleanup
- use GDB's SVE register layout
- make arm-compat-semihosting common
- add riscv semihosting support
- add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting
# gpg: Signature made Mon 18 Jan 2021 10:09:11 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-180121-2: (30 commits)
semihosting: Implement SYS_ISERROR
semihosting: Implement SYS_TMPNAM
semihosting: Implement SYS_ELAPSED and SYS_TICKFREQ
riscv: Add semihosting support for user mode
riscv: Add semihosting support
semihosting: Support SYS_HEAPINFO when env->boot_info is not set
semihosting: Change internal common-semi interfaces to use CPUState *
semihosting: Change common-semi API to be architecture-independent
semihosting: Move ARM semihosting code to shared directories
target/arm: use official org.gnu.gdb.aarch64.sve layout for registers
gdbstub: ensure we clean-up when terminated
gdbstub: drop gdbserver_cleanup in favour of gdb_exit
gdbstub: drop CPUEnv from gdb_exit()
gdbstub: add support to Xfer:auxv:read: packet
gdbstub: implement a softmmu based test
Revert "tests/tcg/multiarch/Makefile.target: Disable run-gdbstub-sha1 test"
configure: gate our use of GDB to 8.3.1 or above
test/guest-debug: echo QEMU command as well
scripts/checkpatch.pl: fix git-show invocation to include diffstat
gitlab: migrate the minimal tools and unit tests from Travis
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/targets/riscv32-linux-user.mak
# default-configs/targets/riscv64-linux-user.mak
While GDB can work with any XML description given to it there is
special handling for SVE registers on the GDB side which makes the
users life a little better. The changes aren't that major and all the
registers save the $vg reported the same. All that changes is:
- report org.gnu.gdb.aarch64.sve
- use gdb nomenclature for names and types
- minor re-ordering of the types to match reference
- re-enable ieee_half (as we know gdb supports it now)
- $vg is now a 64 bit int
- check $vN and $zN aliasing in test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210108224256.2321-11-alex.bennee@linaro.org>
This allows gdb to access the target’s auxiliary vector,
which can be helpful for telling system libraries important details
about the hardware, operating system, and process.
Signed-off-by: Lirong Yuan <yuanzi@google.com>
[AJB: minor tweaks to test case, update MAINTAINERS, restrict to Linux]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200730193932.3654677-1-yuanzi@google.com>
Message-Id: <20210108224256.2321-7-alex.bennee@linaro.org>
This adds a new tests that allows us to test softmmu only features
including watchpoints. To do achieve this we need to:
- add _exit: labels to the boot codes
- write a memory.py test case
- plumb the test case into the build system
- tweak the run_test script to:
- re-direct output when asked
- use socket based connection for all tests
- add a small pause before connection
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-6-alex.bennee@linaro.org>
We won't attempt to run the test now it's gated on a newer version of
gdb.
This reverts commit a930cadd83.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210108224256.2321-5-alex.bennee@linaro.org>
This helps with debugging.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210108224256.2321-3-alex.bennee@linaro.org>
This is going to be helpful when we want to both test the tool
integration and in the case of global generate a xref doc build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-9-alex.bennee@linaro.org>
Debian 9 base container has been removed in commits
e3755276d1 and c9d78b06c0. Remove the last remnants.
Fixes: e3755276d1 ("tests/docker: Remove old Debian 9 containers")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210107072933.3828450-1-f4bug@amsat.org>
Message-Id: <20210114165730.31607-2-alex.bennee@linaro.org>
No matter whether the pxb is enabled or not, the CONFIG_PXB macro in test
would keep undefined. And since pxb is now enabled for ARM Virt machine
by default, let's enable pxb unit-test by removing the CONFIG_PXB.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-8-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-2-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A connecting chardev object has an additional reference by the connecting
thread, so if the chardev is still connecting by the end of the test,
then the chardev object won't be freed. This in turn means that the yank
instance won't be unregistered and when running the next test-case
yank_register_instance will abort, because the yank instance is
already/still registered.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1445e97a5800e3f2ba024ad52b500a0315701632.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We add a qtest for the PWM in the previous patch. It proves it works as
expected.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-6-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.
Users can alter input value by using qom-set QMP command.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
crypto/tlscreds.h includes GnuTLS headers if CONFIG_GNUTLS is set, but
GNUTLS_CFLAGS, that describe include path, are not propagated
transitively to all users of crypto and build fails if GnuTLS headers
reside in non-standard directory (which is a case for homebrew on Apple
Silicon).
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20210102125213.41279-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prior to this patch, the fuzzer found inputs to map PCI device BARs and
enable the device. While it is nice that the fuzzer can do this, it
added significant overhead, since the fuzzer needs to map all the
BARs (regenerating the memory topology), at the start of each input.
With this patch, we do this once, before fuzzing, mitigating some of
this overhead.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201221181203.1853-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There was a race condition in the first test where there was already the
"crw" output in the dmesg, but the "0.0.4711" entry has not been created
in the /sys fs yet. Fix it by waiting until it is there.
The second test has even more problems on gitlab-CI. Even after adding some
more synchronization points (that wait for some messages in the "dmesg"
output to make sure that the modules got loaded correctly), there are still
occasionally some hangs in this test when it is running in the gitlab-CI.
So far I was unable to reproduce these hangs locally on my computer, so
this issue might take a while to debug. Thus disable the 2nd test in the
gitlab-CI until the problems are better understood and fixed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210108185645.86351-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the length of mname is less than 5, memcpy("xenfv", mname, 5) will cause
heap buffer overflow. Therefore, use strncmp to avoid this problem.
The asan showed stack:
ERROR: AddressSanitizer: heap-buffer-overflow on address 0x60200000f2f4 at
pc 0x7f65d8cc2225 bp 0x7ffe93cc5a60 sp 0x7ffe93cc5208 READ of size 5 at
0x60200000f2f4 thread T0
#0 0x7f65d8cc2224 in memcmp (/lib64/libasan.so.5+0xdf224)
#1 0x5632c20be95b in qtest_cb_for_every_machine tests/qtest/libqtest.c:1282
#2 0x5632c20b7995 in main tests/qtest/test-hmp.c:160
#3 0x7f65d88fed42 in __libc_start_main (/lib64/libc.so.6+0x26d42)
#4 0x5632c20b72cd in _start (build/tests/qtest/test-hmp+0x542cd)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20210106050625.518041-1-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add build-system-opensuse jobs and opensuse-leap.docker dockerfile.
Use openSUSE Leap 15.2 container image in the gitlab-CI.
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201229085046.8536-1-acho@suse.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The read binary data as text via a PPM export of the frame buffer
seems a bit sketchy and it did blow up in the real world when the
assertion failed:
https://gitlab.com/qemu-project/qemu/-/jobs/943183183
However short of cleaning up the test to be more binary focused at
least limit the attempt to dump the whole file as hexified zeros in
the logs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210105124405.15424-1-alex.bennee@linaro.org>
The "auto" documentation states:
That means they should run with every QEMU binary (also non-x86)
which is not the case as the check-system-fedora build which only
includes a rag tag group of rare and deprecated targets doesn't
support the virtio device required.
Fixes: ef9bba1484 ("quorum: Implement bdrv_co_block_status()")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210105100402.12350-1-alex.bennee@linaro.org>
Include the 'ccache' package to speed up compilation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201213211601.253530-1-f4bug@amsat.org>
Fixes: d6db2a1cdf ("docker: add debian-buster-arm64-cross")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
cfi-icall is a form of Control-Flow Integrity for indirect function
calls implemented by llvm. It is enabled with a -fsanitize flag.
iotests are currently disabled when -fsanitize options is used, with the
exception of SafeStack.
This patch implements a generic filtering mechanism to allow iotests
with a set of known-to-be-safe -fsanitize option. Then marks SafeStack
and the new options used for cfi-icall safe for iotests
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-4-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 1e419ee68f ("chardev: generate an internal id when none
given") changed the reference ownership semantics of
qemu_chardev_new(NULL, ...): now all chardevs created using
qemu_chardev_new() are added to the /chardevs QOM container, and
the caller does not own a reference to the newly created object.
However, the code at char_file_test_internal() had not been
updated and was calling object_unref() on a chardev object it
didn't own. This makes the chardev be destroyed, but leaves a
dangling pointer in the /chardev container children list, and
seems to be the cause of the following char_serial_test() crash:
Unexpected error in object_property_try_add() at ../qom/object.c:1220: \
attempt to add duplicate property 'serial-id' to object (type 'container')
ERROR test-char - too few tests run (expected 38, got 9)
Update the code to use object_unparent() at the end of
char_file_test_internal(), to make sure the chardev will be
correctly removed from the QOM tree.
Fixes: 1e419ee68f ("chardev: generate an internal id when none given")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201215224133.3545901-2-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Debian 9 containers have been removed a while ago, so we can
delete the corresponding entries in the Makefile, too.
Fixes: e3755276d1 ("tests/docker: Remove old Debian 9 containers")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201215083318.92205-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
After adding some missing packages, it's possible to check 32-bit
builds and tests with the fedora-i386-cross container in the gitlab-CI,
too. Unfortunately, the code in subprojects/ ignores the --extra-cflags
(on purpose), so the vhost-user part has to be disabled for this.
While we're at it, update the container to Fedora 31. Unfortunately the
gcc from the later versions emits some very dubious format-truncation
warnings, so Fedora 32 and 33 are currently unsuitable for this job.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201215083451.92322-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Hopefully this will guard against sloppy code getting into our tests.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201210190417.31673-9-alex.bennee@linaro.org>
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
-----BEGIN PGP SIGNATURE-----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=X/jY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20201222' into staging
Further s390x updates:
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
# gpg: Signature made Tue 22 Dec 2020 10:37:34 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20201222:
tests/acceptance: Add a test with the Fedora 31 kernel and initrd
s390x/pci: Fix memory_region_access_valid call
s390x/pci: fix pcistb length
tests/acceptance: Test the virtio-balloon device on s390x
tests/acceptance: Test virtio-rng on s390 via /dev/hwrng
tests/acceptance: Extract the code to clear dmesg and wait for CRW reports
tests/acceptance: test hot(un)plug of ccw devices
target/s390x: Improve SUB LOGICAL WITH BORROW
target/s390x: Improve cc computation for SUBTRACT LOGICAL
target/s390x: Improve ADD LOGICAL WITH CARRY
target/s390x: Improve cc computation for ADD LOGICAL
qga/commands-posix: Send CCW address on s390x with the fsinfo data
MAINTAINERS: move my git tree to gitlab
s390x: pv: Fence additional unavailable SCLP facilities for PV guests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- New block filter: preallocate (which, on writes beyond an image file's
end, allocates big chunks of data so that such post-EOF writes will
occur less frequently)
- write-zeroes and block-status support for Quorum
- Implementation of truncate for the nvme block driver similarly to the
existing implementations for host block devices and iscsi devices
- Block layer refactoring: Drop the tighten_restrictions concept in the
block permission functions
- iotest fixes
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl/cwIoSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AnvMH+gOnZCwEUKWuBxGX3Wjb/kqV1OuhAhcP
IVrKLRnqdarCYMQ9M4SZL6pedfsujHA7vClTV7NTrenXBsEIradBQ59ztQ0oDirS
4ipIjVtNqj7m86l+IRZDq5HlwOYwwFnWogmLo2bcmNJGLpPQQfrhL2vRJ1wLgFYk
WjeAVlkkYcHnTIDvs4ne9WRSlxGVBWJ4X5nSlRdZqeyUcMY9v4wL4P9Wc4ZuORmq
/5HRcT5JKGaT2bAueaqAGEdtPFGbazEP5uU7MTTK/fueDKIRAXO2d0gqhANtOOJQ
7hMmKhwOPOOhrrpCVi9nxsVwdCOHfurV0km6cOs+Iprm/Wm2UtuS/A8=
=z+7k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-12-18' into staging
Block patches:
- New block filter: preallocate (which, on writes beyond an image file's
end, allocates big chunks of data so that such post-EOF writes will
occur less frequently)
- write-zeroes and block-status support for Quorum
- Implementation of truncate for the nvme block driver similarly to the
existing implementations for host block devices and iscsi devices
- Block layer refactoring: Drop the tighten_restrictions concept in the
block permission functions
- iotest fixes
# gpg: Signature made Fri 18 Dec 2020 14:45:30 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-12-18: (30 commits)
iotests: Fix _send_qemu_cmd with bash 5.1
iotests/102: Pass $QEMU_HANDLE to _send_qemu_cmd
block/nvme: Implement fake truncate() coroutine
quorum: Implement bdrv_co_pwrite_zeroes()
quorum: Implement bdrv_co_block_status()
scripts/simplebench: add bench_prealloc.py
simplebench/results_to_text: make executable
simplebench/results_to_text: add difference line to the table
simplebench/results_to_text: improve view of the table
simplebench: move results_to_text() into separate file
simplebench: rename ascii() to results_to_text()
scripts/simplebench: use standard deviation for +- error
scripts/simplebench: support iops
scripts/simplebench: fix grammar: s/successed/succeeded/
iotests: add 298 to test new preallocate filter driver
iotests.py: execute_setup_common(): add required_fmts argument
iotests: qemu_io_silent: support --image-opts
qemu-io: add preallocate mode parameter for truncate command
block: introduce preallocate filter
block: bdrv_check_perm(): process children anyway
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Add qemu-storage-daemon documentation
- hw/block/nand: Decommission the NAND museum
- vpc: Clean up some buffer abuse
- nfs: fix int overflow in nfs_client_open_qdict
- Several iotests fixes
-----BEGIN PGP SIGNATURE-----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=yLZI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Add qemu-storage-daemon documentation
- hw/block/nand: Decommission the NAND museum
- vpc: Clean up some buffer abuse
- nfs: fix int overflow in nfs_client_open_qdict
- Several iotests fixes
# gpg: Signature made Fri 18 Dec 2020 12:07:30 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block/vpc: Use sizeof() instead of HEADER_SIZE for footer size
block/vpc: Pass footer buffers as VHDFooter * instead of uint8_t *
block/vpc: Pad VHDFooter, replace uint8_t[] buffers
block/vpc: Use sizeof() instead of 1024 for dynamic header size
block/vpc: Pad VHDDynDiskHeader, replace uint8_t[] buffers
block/vpc: Make vpc_checksum() take void *
block/vpc: Don't abuse the footer buffer for dynamic header
block/vpc: Don't abuse the footer buffer as BAT sector buffer
block/vpc: Make vpc_open() read the full dynamic header
iotests:172: use _filter_qom_path
iotests: make _filter_qom_path more strict
MAINTAINERS: add Kevin Wolf as storage daemon maintainer
docs: add qemu-storage-daemon(1) man page
docs: generate qemu-storage-daemon-qmp-ref(7) man page
block/nfs: fix int overflow in nfs_client_open_qdict
hw/block/nand: Decommission the NAND museum
iotests/210: Fix reference output
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This initrd contains a virtio-net and a virtio-gpu kernel module,
so we can check that we can set a MAC address for the network device
and whether we can hot-plug and -unplug a virtio-crypto device.
But the most interesting part is maybe that we can also successfully
write some stuff into the emulated framebuffer of the virtio-gpu
device and make sure that we can read back that data from a screenshot.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201221143423.23607-1-thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
/dev/hwrng is only functional if virtio-rng is working right, so let's
add a sanity check for this device node.
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201215183623.110128-3-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We will use this in more spots soon, so it's easier to put this into
a separate function.
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201215183623.110128-2-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The functions to modify a QString's string are all unused now. Drop
them, and make the string immutable. Saves 16 bytes per QString on my
system.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-21-armbru@redhat.com>
No users left outside tests/, and the ones in tests/ can just as well
use qstring_get_str(). Do that, and drop the function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-14-armbru@redhat.com>
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString. Just one of the callers actually needs a
QString: qemu_rbd_parse_filename(). A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds(). The remainder just need a string.
Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.
qemu_rbd_parse_filename() now has to convert to QString. All others
save a QString temporary. to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
test_primitives() uses union member intmax_t max to compare the
integer members. Unspecified behavior. Has worked fine for many
years, though. Clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-11-armbru@redhat.com>
The string output visitor should serialize numbers so that the string
input visitor deserializes them back to the same number. It fails to
do so.
print_type_number() uses format %f. This is prone to nasty rounding
errors. For instance, numbers between 0 and 0.0000005 get flushed to
zero.
We currently use this visitor only for HMP info migrate, info network,
info qtree, and info memdev. No double values occur there as far as I
can tell.
Fix anyway by formatting with %.17g. 17 decimal digits always suffice
for IEEE double.
See also recent commit "qobject: Fix qnum_to_string() to use
sufficient precision".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-9-armbru@redhat.com>
This demonstrates rounding error due to insufficient precision: double
3.1415926535897932 gets converted to JSON 3.141593.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-8-armbru@redhat.com>
We should serialize numbers to JSON so that they deserialize back to
the same number. We fail to do so.
The culprit is qnum_to_string(): it uses format %f with trailing '0'
trimmed. Results in pretty output for "nice" numbers, but is prone to
nasty rounding errors. For instance, numbers between 0 and 0.0000005
get flushed to zero.
Where exactly the incorrect rounding can bite is tiresome to gauge.
Here's my take.
* In QMP output, type 'number':
- query-blockstats value avg_rd_queue_depth
- QMP query-migrate values mbps, cache-miss-rate, encoding-rate,
busy-rate, compression-rate.
Relatively harmless, I guess.
* In tracing QMP input. Harmless.
* In qemu-ga output, type 'number': guest-get-users value login-time.
Harmless.
* In output of HMP qom-get. Harmless.
Not affected, because double values don't actually occur there (I
think):
* QMP output, type 'any':
* qom-get value
* qom-list, qom-list-properties value default-value
* query-cpu-model-comparison, query-cpu-model-baseline,
query-cpu-model-expansion value props.
* qemu-img --output json output.
* "json:" pseudo-filenames generated by bdrv_refresh_filename().
* The rbd block driver's "=keyvalue-pairs" hack.
* In -object help on property default values. Aside: use of JSON
feels inappropriate here.
* Output of HMP qom-get.
* Argument conversion to QemuOpts for qdev_device_add() and HMP with
qemu_opts_from_qdict()
QMP and HMP device_add, virtio-net failover primary creation,
xen-usb "usb-host" creation, HMP netdev_add, object_add.
* The uses of qobject_input_visitor_new_flat_confused()
As far as I can tell, none of the visited types contain double
values.
* Dumping ImageInfoSpecific with dump_qobject()
Fix by formatting with %.17g. 17 decimal digits always suffice for
IEEE double.
The change to expected test output illustrates the effect: the
rounding errors are gone, but some seemingly "nice" numbers now get
converted to not so nice strings, e.g. 0.42 to "0.41999999999999998".
This is because 0.42 is not representable exactly in double. It's
more accurate in this example than strictly necessary, though.
If ugly accuracy bothers us, we can we can try using the least number
of digits that still converts back to the same double. In this
example, "0.42" would do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-7-armbru@redhat.com>
qnum_to_string() has a FIXME comment about rounding errors due to
insufficient precision. Cover it: 2.718281828459045 gets converted to
"2.718282". The next commit will fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-6-armbru@redhat.com>
Move one of large_number()'s three checks to uint_number(), and the
other two to float_number().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-5-armbru@redhat.com>
simple_number() checks only qnum_get_try_int(). Also check
qnum_get_try_uint() and qnum_get_double().
float_number() checks only qnum_get_double(). Also check
qnum_get_try_int() and qnum_get_try_uint().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-3-armbru@redhat.com>
simple_number() and float_number() convert from JSON to QNumber and
back.
simple_number() tests "-0", but skips the conversion back to JSON,
because it yields "0", not "-0". Works as intended, so better cover
it: don't skip, but expect the funny result.
float_number() tests "-32.20e-10", but skips the conversion back to
JSON, because it yields "-0". This is a known bug in
qnum_to_string(), marked FIXME there. Cover the bug: don't skip, but
expect the funny result.
While there, switch from g_assert() to g_assert_cmpstr() & friends for
friendlier test failures.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-2-armbru@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
With bash 5.1, the output of the following script changes:
a=("double space")
a=${a[@]:0:1}
echo "$a"
from "double space" to "double space", i.e. all white space is
preserved as-is. This is probably what we actually want here (judging
from the "...to accommodate pathnames with spaces" comment), but before
5.1, we would have to quote the ${} slice to get the same behavior.
In any case, without quoting, the reference output of many iotests is
different between bash 5.1 and pre-5.1, which is not very good. The
output of 5.1 is what we want, so whatever we do to get pre-5.1 to the
same result, it means we have to fix the reference output of basically
all tests that invoke _send_qemu_cmd (except the ones that only use
single spaces in the commands they invoke).
Instead of quoting the ${} slice (cmd="${$@: 1:...}"), we can also just
not use array slicing and replace the whole thing with a simple "cmd=$1;
shift", which works because all callers quote the whole $cmd argument
anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-3-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
The first parameter passed to _send_qemu_cmd is supposed to be the
$QEMU_HANDLE. 102 does not do so here, fix it.
As a result, the output changes: Now we see the prompt this command is
supposedly waiting for before the resize message - as it should be.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-2-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
This simply calls bdrv_co_pwrite_zeroes() in all children.
bs->supported_zero_flags is also set to the flags that are supported
by all children.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <2f09c842781fe336b4c2e40036bba577b7430190.1605286097.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The quorum driver does not implement bdrv_co_block_status() and
because of that it always reports to contain data even if all its
children are known to be empty.
One consequence of this is that if we for example create a quorum with
a size of 10GB and we mirror it to a new image the operation will
write 10GB of actual zeroes to the destination image wasting a lot of
time and disk space.
Since a quorum has an arbitrary number of children of potentially
different formats there is no way to report all possible allocation
status flags in a way that makes sense, so this implementation only
reports when a given region is known to contain zeroes
(BDRV_BLOCK_ZERO) or not (BDRV_BLOCK_DATA).
If all children agree that a region contains zeroes then we can return
BDRV_BLOCK_ZERO using the smallest size reported by the children
(because all agree that a region of at least that size contains
zeroes).
If at least one child disagrees we have to return BDRV_BLOCK_DATA.
In this case we use the largest of the sizes reported by the children
that didn't return BDRV_BLOCK_ZERO (because we know that there won't
be an agreement for at least that size).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Tested-by: Tao Xu <tao3.xu@intel.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <db83149afcf0f793effc8878089d29af4c46ffe1.1605286097.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-13-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a parameter to skip test if some needed additional formats are not
supported (for example filter drivers).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-12-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201021145859.11201-11-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
To use Avocado's testlogs plug-in on CI it is required to use
its 83.0 or greater version.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20201211183827.915232-2-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On the pc-i440fx machine, the floppy drive relies on the i8257 DMA
controller. Add this device to the floppy fuzzer config, and silence the
warning about a missing format specifier for the null-co:// drive.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201216203328.41112-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
device[NUMBER] thing in QOM path is not stable and tracking it during
code modifications is not fun. Let's filter it like it's already done
in iotest 186.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216095205.526235-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to original commit, that added this filter (627f607e3d),
the problematic thing in qom path is device[NUMBER], not the whole
path. Seems that tracking the other parts of the path in iotest output
is not bad. Let's make _filter_qom_path stricter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216095205.526235-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 8b1170012b has added a global maximum disk length for the block
layer, so the error message when creating an overly large disk has
changed.
Fixes: 8b1170012b
("block: introduce BDRV_MAX_LENGTH")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201214175158.299919-1-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The softfloat tests are external repositories, so we do not care
about implicit fallthrough warnings in this code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201211152426.350966-12-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit efc6c07 ("configure: Add a test for the minimum compiler
version"), QEMU explicitely depends on GCC >= 4.8.
(clang >= 3.4 advertizes itself as GCC >= 4.2 compatible)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201210134752.780923-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been marked as deprecated since QEMU v4.2, replaced by
the -overcommit option. Time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In using the address_space_translate_internal API, address_space_cache_init
forgot one piece of advice that can be found in the code for
address_space_translate_internal:
/* MMIO registers can be expected to perform full-width accesses based only
* on their address, without considering adjacent registers that could
* decode to completely different MemoryRegions. When such registers
* exist (e.g. I/O ports 0xcf8 and 0xcf9 on most PC chipsets), MMIO
* regions overlap wildly. For this reason we cannot clamp the accesses
* here.
*
* If the length is small (as is the case for address_space_ldl/stl),
* everything works fine. If the incoming length is large, however,
* the caller really has to do the clamping through memory_access_size.
*/
address_space_cache_init is exactly one such case where "the incoming length
is large", therefore we need to clamp the resulting length---not to
memory_access_size though, since we are not doing an access yet, but to
the size of the resulting section. This ensures that subsequent accesses
to the cached MemoryRegionSection will be in range.
With this patch, the enclosed testcase notices that the used ring does
not fit into the MSI-X table and prints a "qemu-system-x86_64: Cannot map used"
error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test the scenario where the -action panic=none parameter is used to
signal that the VM must continue executing after a guest panic
occurs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-5-git-send-email-alejandro.j.jimenez@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be. However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug. Use it instead of a separate runstate.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable the run-gdbstub-sha1 test: it provokes an internal error
assertion failure in Ubuntu gdb 8.1.1-0ubuntu1 (Ubuntu gdb
8.1-0ubuntu3.2 also has this assert but we were previously skipping
this test because it doesn't support connection over local domain
sockets) :
timeout 60 /home/petmay01/linaro/qemu-for-merges/tests/guest-debug/run-test.py --gdb /usr/bin/gdb-multiar
/build/gdb-veKdC1/gdb-8.1.1/gdb/regcache.c:122: internal-error: void* init_regcache_descr(gdbarch*): Asser
A problem internal to GDB has been detected,
further debugging may prove unreliable.
This is a bug, please report it. For instructions, see:
<http://www.gnu.org/software/gdb/bugs/>.
Aborted (core dumped)
/home/petmay01/linaro/qemu-for-merges/tests/tcg/multiarch/Makefile.target:51: recipe for target 'run-gdbst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201214133702.24088-1-peter.maydell@linaro.org
- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()
-----BEGIN PGP SIGNATURE-----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=ISxg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()
# gpg: Signature made Fri 11 Dec 2020 17:06:19 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (34 commits)
block: Fix deadlock in bdrv_co_yield_to_drain()
block: Fix locking in qmp_block_resize()
block: Simplify qmp_block_resize() error paths
block: introduce BDRV_MAX_LENGTH
block/io: bdrv_check_byte_request(): drop bdrv_is_inserted()
block/io: bdrv_refresh_limits(): use ERRP_GUARD
block/file-posix: fix workaround in raw_do_pwrite_zeroes()
can-host: Fix crash when 'canbus' property is not set
iotests/221: Discard image before qemu-img map
file-posix: check the use_lock before setting the file lock
iotests/308: Add test for FUSE exports
iotests: Enable fuse for many tests
iotests: Allow testing FUSE exports
iotests: Give access to the qemu-storage-daemon
storage-daemon: Call bdrv_close_all() on exit
iotests/287: Clean up subshell test image
iotests: Let _make_test_img guess $TEST_IMG_FILE
iotests: Restrict some Python tests to file
iotests/091: Use _cleanup_qemu instad of "wait"
iotests: Derive image names from $TEST_IMG
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.
It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.
So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.
And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.
Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.
Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.
So, alignment can't be greater than 2^30.
Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.
OK, then, let's apply it to block/io.
Let's consider all block/io entry points of offset/bytes:
4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().
We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.
And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:
file-posix.c: adopted by this patch
write-threshold.c: only read fields
test-write-threshold.c: sets obviously small constant values
Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.
After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.
For all io requests except for discard we keep for now old restriction
of 32bit request length.
iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
See the new comment for why this should be done.
I do not have a reproducer on master, but when using FUSE block exports,
this test breaks depending on the underlying filesystem (for me, it
works on tmpfs, but fails on xfs, because the block allocated by
file-posix has 16 kB there instead of 4 kB).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201207152245.66987-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have good coverage of the normal I/O paths now, but what remains is a
test that tests some more special cases: Exporting an image on itself
(thus turning a formatted image into a raw one), some error cases, and
non-writable and non-growable exports.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-21-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to. Note that this is no
attempt at being definitely complete. There are some tests that might
be modified to run on FUSE, but this patch still skips them. This patch
only tries to pick the rather low-hanging fruits.
Note that 221 and 250 only pass when .lseek is correctly implemented,
which is only possible with a libfuse that is 3.8 or newer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This pretends FUSE exports are a kind of protocol. As such, they are
always tested under the format node. This is probably the best way to
test them, actually, because this will generate more I/O load and more
varied patterns.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-19-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
287 creates an image in a subshell (thanks to the pipe) to see whether
that is possible with compression_type=zstd. If _make_test_img were to
modify any global state, this global state would then be lost before we
could cleanup the image.
When using FUSE as the test protocol, this global state is important, so
clean up the image before the state is lost.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-16-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When most iotests want to create a test image that is named differently
from the default $TEST_IMG, they do something like this:
TEST_IMG="$TEST_IMG.base" _make_test_img $options
This works fine with the "file" protocol, but not so much for anything
else: _make_test_img tries to create an image under $TEST_IMG_FILE
first, and only under $TEST_IMG if the former is not set; and on
everything but "file", $TEST_IMG_FILE is set.
There are two ways we can fix this: First, we could make all tests
adjust not only TEST_IMG, but also TEST_IMG_FILE if that is present
(e.g. with something like _set_test_img_suffix $suffix that would affect
not only TEST_IMG but also TEST_IMG_FILE, if necessary). This is a
pretty clean solution, and this is maybe what we should have done from
the start.
But it would also require changes to most existing bash tests. So the
alternative is this: Let _make_test_img see whether $TEST_IMG_FILE still
points to the original value. If so, it is possible that the caller has
adjusted $TEST_IMG but not $TEST_IMG_FILE. In such a case, we can (for
most protocols) derive the corresponding $TEST_IMG_FILE value from
$TEST_IMG value and thus work around what technically is the caller
misbehaving.
This second solution is less clean, but it is robust against people
keeping their old habit of adjusting TEST_IMG only, and requires much
less changes. So this patch implements it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-15-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most Python tests are restricted to the file protocol (without
explicitly saying so), but these are the ones that would break
./check -fuse -qcow2.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-14-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the test environment has some other child processes running (like a
storage daemon that provides a FUSE export), then "wait" will never
finish. Use wait=yes _cleanup_qemu instead.
(We need to discard the output so there is no change to the reference
output.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-13-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid creating images with custom filenames in $TEST_DIR, because
non-file protocols may want to keep $TEST_IMG (and all other test
images) in some other directory.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-12-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This generally does not work on non-file protocols. It is better to
create the image with the final name from the start, and most tests do
this already. Let 046 follow suit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-11-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img convert (without -n) can often be replaced by a combination of
_make_test_img + qemu-img convert -n. Doing so allows converting to
protocols that do not allow direct file creation, such as FUSE exports.
The only problem is that for formats other than qcow2 and qed (qcow1 at
least), this may lead to high disk usage for some reason, so we cannot
do it everywhere.
But we can do it in 028 and 089, so let us do that so they can run on
FUSE exports. Also, in 028 this allows us to remove a 9-line comment
that used to explain why we cannot safely filter drive-backup's image
creation output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-10-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Executing _make_test_img as part of a pipe will undo all variable
changes it has done. As such, this could not work with FUSE (because
we want to remember all of our exports and their qemu instances).
Replace the pipe by a temporary file in 071 and 174 (the two tests that
can run on FUSE).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-9-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In most cases, _make_test_img does not need a _filter_imgfmt on top. It
does that by itself.
(The exception is when IMGFMT has been overwritten but TEST_IMG has not.
In such cases, we do need a _filter_imgfmt on top to filter the test's
original IMGFMT from TEST_IMG.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-8-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Verify that a fid specified on the command line shows up correctly
as the function_id in the guest.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
[re-formatted overlong lines]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201130180216.15366-4-cohuck@redhat.com>
The kernel/initrd combination does not provide the virtio-net
driver; therefore, simply check whether the presented device type
is indeed virtio-net for the two virtio-net-{ccw,pci} devices.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
[re-formatted overlong lines]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201130180216.15366-3-cohuck@redhat.com>
The max_revision prop of virtio-ccw devices can be used to force
an older revision for compatibility handling. The easiest way to
check this is to force a device to revision 0, which turns off
virtio-1.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
[re-formatted overlong lines]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201130180216.15366-2-cohuck@redhat.com>
This adds a very basic test for checking that we present devices
in a way that Linux can consume: boot with both virtio-net-ccw and
virtio-net-pci attached and then verify that Linux is able to see
and detect these devices.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201126130158.1471985-1-cohuck@redhat.com>
qemu_opts_set is used to create default network backends and to
parse sugar options -kernel, -initrd, -append, -bios and -dtb.
These are very different uses:
I would *expect* a function named qemu_opts_set to set an option in a
merge-lists QemuOptsList, such as -kernel, and possibly to set an option
in a non-merge-lists QemuOptsList with non-NULL id, similar to -set.
However, it wouldn't *work* to use qemu_opts_set for the latter
because qemu_opts_set uses fail_if_exists==1. So, for non-merge-lists
QemuOptsList and non-NULL id, the semantics of qemu_opts_set (fail if the
(QemuOptsList, id) pair already exists) are debatable.
On the other hand, I would not expect qemu_opts_set to create a
non-merge-lists QemuOpts with a single option; which it does, though.
For this case of non-merge-lists QemuOptsList and NULL id, qemu_opts_set
hardly adds value over qemu_opts_parse. It does skip some parsing and
unescaping, but that's not needed when creating default network
backends.
So qemu_opts_set has warty behavior for non-merge-lists QemuOptsList
if id is non-NULL, and it's mostly pointless if id is NULL. My
solution to keeping the API as simple as possible is to limit
qemu_opts_set to merge-lists QemuOptsList. For them, it's useful (we
don't want comma-unescaping for -kernel) *and* has sane semantics.
Network backend creation is switched to qemu_opts_parse.
qemu_opts_set is now only used on merge-lists QemuOptsList... except
in the testcase, which is changed to use a merge-list QemuOptsList.
With this change we can also remove the id parameter. With the
parameter always NULL, we know that qemu_opts_create cannot fail
and can pass &error_abort to it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For PDEP and PEXT, the mask is provided in the memory (mod+r/m)
operand, and therefore is loaded in s->T0 by gen_ldst_modrm.
The source is provided in the second source operand (VEX.vvvv)
and therefore is loaded in s->T1. Fix the order in which
they are passed to the helpers.
Reported-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Analyzed-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1605123
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
