Synchronize content of linux-user/mips/syscall_nr.h and
linux-user/mips64/syscall_nr.h with Linux kernel 4.18 headers.
This adds 9 new syscall numbers, the last being NR_io_pgetevents.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
This allows the default (and maximum) vector length to be set
from the command-line. Which is extraordinarily helpful in
debugging problems depending on vector length without having to
bake knowledge of PR_SET_SVE_VL into every guest binary.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
r11 is a volatile register on PPC as per calling conventions.
The safe_syscall code uses it to check if the signal_pending
is set during the safe_syscall. When a syscall is interrupted
on return from signal handling, the r11 might be corrupted
before we retry the syscall leading to a crash. The registers
r0-r13 are not to be used here as they have
volatile/designated/reserved usages.
Change the code to use r14 which is non-volatile.
Use SP+16 which is a slot for LR, for save/restore of previous value
of r14. SP+16 can be used, as LR is preserved across the syscall.
Steps to reproduce:
On PPC host, issue `qemu-x86_64 /usr/bin/cc -E -`
Attempt Ctrl-C, the issue is reproduced.
Reference:
https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi-1.9.html#REGhttps://openpowerfoundation.org/wp-content/uploads/2016/03/ABI64BitOpenPOWERv1.1_16July2015_pub4.pdf
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <153301568965.30312.10498134581068746871.stgit@dhcp-9-109-246-16>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
I've slightly re-organised the check to more closely match the
sequence that the kernel uses in do_mmap(). We check for both the zero
case (EINVAL) and the overflow length case (ENOMEM).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: umarcor <1783362@bugs.launchpad.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180730134321.19898-2-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This allows the tests generated by debian-powerpc-user-cross
to function properly, especially tests/test-coroutine.
Technically this syscall is available to both ppc32 and ppc64,
but only ppc32 glibc actually uses it. Thus the ppc64 path is
untested.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180718200648.22529-1-richard.henderson@linaro.org>
When we try to use some targets on ppc64, it can happen the target
doesn't support the host page size to align ELF load sections and
fails with:
ELF load command alignment not page-aligned
Since commit a70daba377 ("linux-user: Tell guest about big host
page sizes") the host page size is used to align ELF sections, but
this doesn't work if the alignment required by the load section is
smaller than the host one. For these cases, we continue to use the
TARGET_PAGE_SIZE instead of the host one.
I have tested this change on ppc64, and it fixes qemu linux-user for:
s390x, m68k, i386, arm, aarch64, hppa
and I have tested it doesn't break the following targets:
x86_64, mips64el, sh4
mips and mipsel abort, but I think for another reason.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: fixed "info->alignment = 0"]
Message-Id: <20180716195349.29959-1-laurent@vivier.eu>
If this is not done, qemu would drop any control message after the first
one.
This is because glibc's `CMSG_NXTHDR` macro accesses the uninitialized
cmsghdr's length field in order to find out if the message fits into the
`msg_control` buffer, wrongly assuming that it doesn't because the
length field contains garbage. Accessing the length field is fine for
completed messages we receive from the kernel, but is - as far as I know
- not needed since the kernel won't return such an invalid cmsghdr in
the first place.
This is tracked as this glibc bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=13500
It's probably also a good idea to bail with an error if `CMSG_NXTHDR`
returns NULL but `TARGET_CMSG_NXTHDR` doesn't (ie. we still expect
cmsgs).
Signed-off-by: Jonas Schievink <jonasschievink@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180711221244.31869-1-jonasschievink@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The value given by mmap_find_vma_reserved() is used with mmap(),
so it is needed to be aligned with the host page size.
Since commit 18e80c55bb, reserved_va is only aligned to TARGET_PAGE_SIZE,
and it works well if this size is greater or equal to the host page size.
But ppc64 hosts have 64kB page size and when we start a 4kiB page size
guest (like i386), it fails when it tries to mmap the stack:
mmap stack: Invalid argument
Fixes: 18e80c55bb (linux-user: Tidy and enforce reserved_va initialization)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180714193553.30846-1-laurent@vivier.eu>
Commit 435da5e709 didn't convert a fcntl() call to safe_fcntl()
for TARGET_NR_fcntl64 case. There is no reason to not use it
in this case.
Fixes: 435da5e709 linux-user: Use safe_syscall wrapper for fcntl
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180713125805.10749-1-laurent@vivier.eu>
Qemu includes the glibc headers for the host defines and target headers are
part of the qemu source themselves. The glibc has the F_GETLK64, F_SETLK64
and F_SETLKW64 defined to 12, 13 and 14 for all archs in
sysdeps/unix/sysv/linux/bits/fcntl-linux.h. The linux kernel generic
definition for F_*LK is 5, 6 & 7 and F_*LK64* is 12,13, and 14 as seen in
include/uapi/asm-generic/fcntl.h. On 64bit machine, by default the kernel
assumes all F_*LK to 64bit calls and doesnt support use of F_*LK64* as
can be seen in include/linux/fcntl.h in linux source.
On x86_64 host, the values for F_*LK64* are set to 5, 6 and 7
explicitly in /usr/include/x86_64-linux-gnu/bits/fcntl.h by the glibc.
Whereas, a PPC64 host doesn't have such a definition in
/usr/include/powerpc64le-linux-gnu/bits/fcntl.h by the glibc. So,
the sources on PPC64 host sees the default value of F_*LK64*
as 12, 13 & 14(fcntl-linux.h).
Since the 64bit kernel doesnt support 12, 13 & 14; the glibc fcntl syscall
implementation(__libc_fcntl*(), __fcntl64_nocancel) does the F_*LK64* value
convertion back to F_*LK* values on PPC64 as seen in
sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h with FCNTL_ADJUST_CMD()
macro. Whereas on x86_64 host the values for F_*LK64* are set to 5, 6 and 7
and no adjustments are needed.
Since qemu doesnt use the glibc fcntl, but makes the safe_syscall* on its
own, the PPC64 qemu is calling the syscall with 12, 13, and 14(without
adjustment) and they all fail. The fcntl calls to F_GETLK/F_SETLK|W all
fail by all pplications run on PPC64 host user emulation.
The fix here could be to see why on PPC64 the glibc is still keeping
F_*LK64* different from F_*LK and why adjusting them to 5, 6 and 7 before
the syscall for PPC only. See if we can make the
/usr/include/powerpc64le-linux-gnu/bits/fcntl.h to have the values
5, 6 & 7 just like x86_64 and remove the adjustment code in glibc. That
way, qemu sources see the kernel supported values in glibc headers.
OR
On PPC64 host, qemu sources see both F_*LK & F_*LK64* as same and set to
12, 13 and 14 because __USE_FILE_OFFSET64 is defined in qemu
sources(also refer sysdeps/unix/sysv/linux/bits/fcntl-linux.h).
Do the value adjustment just like it is done by glibc source by using
F_GETLK value of 5. That way, we make the syscalls with the actual
supported values in Qemu. The patch is taking this approach.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <153148521235.87746.14142430397318741182.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This can still be reported using the "-d unimp" command line option.
Code change produced with:
git ls-files linux-user | \
xargs sed -i -E 's/fprintf\(stderr,\s?(".*not implemented\\n")\);/qemu_log_mask(LOG_UNIMP, \1);/g'
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180706155127.7483-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This can still be reported using the "-d unimp" command line option.
Fixes: https://bugs.launchpad.net/qemu/+bug/1777226
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180706155127.7483-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As we don't always take the normal exit path when running a guest we
can skip the normal exit destructors where gcov normally dumps it's
info. The GCC manual suggests long running programs use __gcov_dump()
to flush out the coverage state periodically so we use that here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
To avoid repeating ourselves move our preexit clean-up code into a
helper function. I figured the continuing effort to split of the
syscalls made it worthwhile creating a new file for it now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
-----BEGIN PGP SIGNATURE-----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=mbu2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/shorne/tags/pull-or-20180703' into staging
OpenRISC cleanups and Fixes for QEMU 3.0
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
# gpg: Signature made Tue 03 Jul 2018 14:44:10 BST
# gpg: using RSA key C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* remotes/shorne/tags/pull-or-20180703: (25 commits)
target/openrisc: Fix writes to interrupt mask register
target/openrisc: Fix delay slot exception flag to match spec
linux-user: Fix struct sigaltstack for openrisc
linux-user: Implement signals for openrisc
target/openrisc: Add support in scripts/qemu-binfmt-conf.sh
target/openrisc: Reorg tlb lookup
target/openrisc: Increase the TLB size
target/openrisc: Stub out handle_mmu_fault for softmmu
target/openrisc: Use identical sizes for ITLB and DTLB
target/openrisc: Fix cpu_mmu_index
target/openrisc: Fix tlb flushing in mtspr
target/openrisc: Reduce tlb to a single dimension
target/openrisc: Merge mmu_helper.c into mmu.c
target/openrisc: Remove indirect function calls for mmu
target/openrisc: Merge tlb allocation into CPUOpenRISCState
target/openrisc: Form the spr index from tcg
target/openrisc: Exit the TB after l.mtspr
target/openrisc: Split out is_user
target/openrisc: Link more translation blocks
target/openrisc: Fix singlestep_enabled
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
-----BEGIN PGP SIGNATURE-----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=AHrx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180703' into staging
ppc patch queue 2018-07-03
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
# gpg: Signature made Tue 03 Jul 2018 06:55:22 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.0-20180703: (35 commits)
ppc: Include vga cirrus card into the compiling process
target/ppc: Relax reserved bitmask of indexed store instructions
target/ppc: set is_jmp on ppc_tr_breakpoint_check
spapr: compute default value of "hpt-max-page-size" later
target/ppc/kvm: don't pass cpu to kvm_get_smmu_info()
target/ppc/kvm: get rid of kvm_get_fallback_smmu_info()
ppc440_uc: Basic emulation of PPC440 DMA controller
sam460ex: Add RTC device
hw/timer: Add basic M41T80 emulation
ppc4xx_i2c: Rewrite to model hardware more closely
hw/ppc: Give sam46ex its own config option
fpu_helper.c: fix setting FPSCR[FI] bit
target/ppc: Implement the rest of gen_st_atomic
target/ppc: Implement the rest of gen_ld_atomic
target/ppc: Use atomic min/max helpers
target/ppc: Use MO_ALIGN for EXIWX and ECOWX
target/ppc: Split out gen_st_atomic
target/ppc: Split out gen_ld_atomic
target/ppc: Split out gen_load_locked
target/ppc: Tidy gen_conditional_store
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/ppc/spapr.c
All of the existing code was boilerplate from elsewhere,
and would crash the guest upon the first signal.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
v2:
Add a comment to the new definition of target_pt_regs.
Install the signal mask into the ucontext.
v3:
Incorporate feedback from Laurent.
Always use the gen_conditional_store implementation that uses
atomic_cmpxchg. Make sure and clear reserve_addr across most
interrupts crossing the cpu_loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
add IPV6_MULTICAST_HOPS and IPV6_MULTICAST_LOOP that need
32bit value conversion
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180627212152.26525-3-laurent@vivier.eu>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -n '[<>][<>]= ?[1-5]0'
and modified manually.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-46-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We've already added the helpers with an SVE patch, all that remains
is to wire up the aa64 and aa32 translators. Enable the feature
within -cpu max for CONFIG_USER_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable ARM_FEATURE_SVE for the generic "max" cpu.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Place them in exec.c, exec-all.h and ram_addr.h. This removes
knowledge of translate-all.h (which is an internal header) from
several files outside accel/tcg and removes knowledge of
AddressSpace from translate-all.c (as it only operates on ram_addr_t).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use mmap_lock in user-mode to protect TCG state and the page descriptors.
In !user-mode, each vCPU has its own TCG state, so no locks needed.
Per-page locks are used to protect the page descriptors.
Per-TB locks are used in both modes to protect TB jumps.
Some notes:
- tb_lock is removed from notdirty_mem_write by passing a
locked page_collection to tb_invalidate_phys_page_fast.
- tcg_tb_lookup/remove/insert/etc have their own internal lock(s),
so there is no need to further serialize access to them.
- do_tb_flush is run in a safe async context, meaning no other
vCPU threads are running. Therefore acquiring mmap_lock there
is just to please tools such as thread sanitizer.
- Not visible in the diff, but tb_invalidate_phys_page already
has an assert_memory_lock.
- cpu_io_recompile is !user-only, so no mmap_lock there.
- Added mmap_unlock()'s before all siglongjmp's that could
be called in user-mode while mmap_lock is held.
+ Added an assert for !have_mmap_lock() after returning from
the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic.
Performance numbers before/after:
Host: AMD Opteron(tm) Processor 6376
ubuntu 17.04 ppc64 bootup+shutdown time
700 +-+--+----+------+------------+-----------+------------*--+-+
| + + + + + *B |
| before ***B*** ** * |
|tb lock removal ###D### *** |
600 +-+ *** +-+
| ** # |
| *B* #D |
| *** * ## |
500 +-+ *** ### +-+
| * *** ### |
| *B* # ## |
| ** * #D# |
400 +-+ ** ## +-+
| ** ### |
| ** ## |
| ** # ## |
300 +-+ * B* #D# +-+
| B *** ### |
| * ** #### |
| * *** ### |
200 +-+ B *B #D# +-+
| #B* * ## # |
| #* ## |
| + D##D# + + + + |
100 +-+--+----+------+------------+-----------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/HwmBHXe
debian jessie aarch64 bootup+shutdown time
90 +-+--+-----+-----+------------+------------+------------+--+-+
| + + + + + + |
| before ***B*** B |
80 +tb lock removal ###D### **D +-+
| **### |
| **## |
70 +-+ ** # +-+
| ** ## |
| ** # |
60 +-+ *B ## +-+
| ** ## |
| *** #D |
50 +-+ *** ## +-+
| * ** ### |
| **B* ### |
40 +-+ **** # ## +-+
| **** #D# |
| ***B** ### |
30 +-+ B***B** #### +-+
| B * * # ### |
| B ###D# |
20 +-+ D ##D## +-+
| D# |
| + + + + + + |
10 +-+--+-----+-----+------------+------------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/iGpGFtv
The gains are high for 4-8 CPUs. Beyond that point, however, unrelated
lock contention significantly hurts scalability.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These were named incorrectly, going so far as to invade strace.list.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180607184844.30126-2-richard.henderson@linaro.org>
[lv: replace tabs by spaces]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove a "#if defined(XX) || defined(YY) || ..." with all available
targets
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-16-laurent@vivier.eu>
add a per target target_fcntl.h and include the generic one from them
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
linux-user/syscall.c:9860:17: warning: Call to function 'strcpy' is insecure as it does not provide bounding of the memory buffer. Replace unbounded copy functions with analogous functions that support length arguments such as 'strlcpy'. CWE-119
strcpy (buf->machine, cpu_to_uname_machine(cpu_env));
^~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170724182751.18261-32-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Extend special registers to 64-bits. This is in preparation for
MFSE/MTSE, moves to and from extended special registers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Values defined for sparc are not correct.
Copy the content of "arch/sparc/include/uapi/asm/socket.h"
to fix them.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-8-laurent@vivier.eu>
to be like in the kernel and rename it TARGET_ARCH_HAS_SOCKET_TYPES
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-7-laurent@vivier.eu>
Change conditional #ifdef part by #undef of the symbols
redefined for PPC relative to generic/socket.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-6-laurent@vivier.eu>
and include the file from architectures without specific definitions
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-5-laurent@vivier.eu>
Coverity points out that there's a missing break in the switch in
host_to_target_cmsg() where we update tgt_len for
cmsg_level/cmsg_type combinations which require a different length
for host and target (CID 1385425). To avoid duplicating the default
case (target length same as host) in both switches, set that before
the switch so that only the cases which want to override it need any
code.
This fixes a bug where we would have used the wrong length
for SOL_SOCKET/SO_TIMESTAMP messages where the target and
host have differently sized 'struct timeval' (ie one is 32
bit and the other is 64 bit).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180518184715.29833-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
cpu_init() was replaced by cpu_create() since 2.12 but comments
weren't updated. So update stale comments to point that page
sizes arei actually initialized by tcg_exec_init(). Also move
another qemu_host_page_size related comment before tcg_exec_init()
where it belongs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1526557877-293151-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
"sun4" is not recognized by config.guess.
linux defines sparc and sparc64 in arch/sparc/Makefile.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20180509231123.20864-7-laurent@vivier.eu>
As l_type values (F_RDLCK, F_WRLCK, F_UNLCK, F_EXLCK, F_SHLCK)
are not bitmasks, we can't use target_to_host_bitmask() and
host_to_target_bitmask() to convert them.
Introduce target_to_host_flock() and host_to_target_flock()
to convert values between host and target.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20180509231123.20864-5-laurent@vivier.eu>
And kill sys_aplib, add sys_sync_file_range:
on sparc, since linux 2.6.17, aplib syscall has been replaced
by sync_file_range syscall.
(289eee6fa78e ["SPARC]: Wire up sys_sync_file_range() into syscall tables.")
The syscall has been removed in linux v2.5.71
(6196166fad "[SPARC64]: Kill sys_aplib.")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20180509231123.20864-4-laurent@vivier.eu>
include/uapi/asm-generic/fcntl.h insert a padding macro at
the end of the structures flock and flock64.
This macro is defined to "short __unused;" on sparc,
and "long pad[4]" on mips.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20180509231123.20864-3-laurent@vivier.eu>
The insns in the ARMv8.1-Atomics are added to the existing
load/store exclusive and load/store reg opcode spaces.
Rearrange the top-level decoders for these to accomodate.
The Atomics insns themselves still generate Unallocated.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-8-richard.henderson@linaro.org
[PMM: Drop the ARM_FEATURE_V8_1 feature flag]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 8efb2ed5ec ("linux-user: Correct signedness of
target_flock l_start and l_len fields"), flock64 structure uses
abi_llong for l_start and l_len in place of "unsigned long long"
this should force them to be aligned accordingly to the target
rules. So we can remove the padding field and the QEMU_PACKED
attribute.
I have compared the result of the following program before and
after the change:
cat -> flock64_dump <<EOF
p/d sizeof(struct target_flock64)
p/d &((struct target_flock64 *)0)->l_type
p/d &((struct target_flock64 *)0)->l_whence
p/d &((struct target_flock64 *)0)->l_start
p/d &((struct target_flock64 *)0)->l_len
p/d &((struct target_flock64 *)0)->l_pid
quit
EOF
for file in build/all/*-linux-user/qemu-* ; do
echo $file
gdb -batch -nx -x flock64_dump $file 2> /dev/null
done
The sizeof() changes because we remove the QEMU_PACKED.
The new size is 32 (except for i386 and m68k) and this is
the real size of "struct flock64" on the target architecture.
The following architectures differ:
aarch64_be, aarch64, alpha, armeb, arm, cris, hppa, nios2, or1k,
riscv32, riscv64, s390x.
For a subset of these architectures, I have checked with the following
program the new structure is the correct one:
#include <stdio.h>
#define __USE_LARGEFILE64
#include <fcntl.h>
int main(void)
{
printf("struct flock64 %d\n", sizeof(struct flock64));
printf("l_type %d\n", &((struct flock64 *)0)->l_type);
printf("l_whence %d\n", &((struct flock64 *)0)->l_whence);
printf("l_start %d\n", &((struct flock64 *)0)->l_start);
printf("l_len %d\n", &((struct flock64 *)0)->l_len);
printf("l_pid %d\n", &((struct flock64 *)0)->l_pid);
}
[I have checked aarch64, alpha, hppa, s390x]
For ARM, the target_flock64 becomes the EABI definition, so we need to
define the OABI one in place of the EABI one and use it when it is
needed.
I have also fixed the alignment value for sh4 (to align llong on 4 bytes)
(see c2e3dee6e0 "linux-user: Define target alignment size")
[We should check alignment properties for cris, nios2 and or1k]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180502215730.28162-1-laurent@vivier.eu>
The FDPIC restorer needs to deal with a function descriptor, hence we
have to extend 'retcode' such that it can hold the instructions needed
to perform this.
The restorer sequence uses the same thumbness as the exception
handler (mainly to support Thumb-only architectures).
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-5-christophe.lyon@st.com>
[lv: moved the change to linux-user/arm/signal.c]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add FDPIC info into image_info structure since interpreter info is on
stack and needs to be saved to be accessed later on.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-4-christophe.lyon@st.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to avoid code disabled by default, because it ends up less
tested. This patch removes all instances of #ifdef CONFIG_USE_FDPIC,
most of which can be safely kept. For the ones that should be
conditionally executed, we define elf_is_fdpic(). Without this patch,
defining CONFIG_USE_FDPIC would prevent QEMU from building precisely
because elf_is_fdpic is not defined.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-2-christophe.lyon@st.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
No code change, only move code from main.c to
xtensa/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-20-laurent@vivier.eu>
No code change, only move code from main.c to
hppa/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-19-laurent@vivier.eu>
No code change, only move code from main.c to
riscv/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-18-laurent@vivier.eu>
No code change, only move code from main.c to
tilegx/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-17-laurent@vivier.eu>
No code change, only move code from main.c to
s390x/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-16-laurent@vivier.eu>
No code change, only move code from main.c to
alpha/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-15-laurent@vivier.eu>
No code change, only move code from main.c to
m68k/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-14-laurent@vivier.eu>
No code change, only move code from main.c to
microblaze/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-13-laurent@vivier.eu>
No code change, only move code from main.c to
cris/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-12-laurent@vivier.eu>
No code change, only move code from main.c to
sh4/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-11-laurent@vivier.eu>
No code change, only move code from main.c to
openrisc/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-10-laurent@vivier.eu>
No code change, only move code from main.c to
nios2/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-9-laurent@vivier.eu>
No code change, only move code from main.c to
mips/cpu_loop.c.
Include mips/cpu_loop.c in mips64/cpu_loop.c
to avoid to duplicate code.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-8-laurent@vivier.eu>
No code change, only move code from main.c to
ppc/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-7-laurent@vivier.eu>
No code change, only move code from main.c to
sparc/cpu_loop.c.
Include sparc/cpu_loop.c in sparc64/cpu_loop.c
to avoid to duplicate code.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-6-laurent@vivier.eu>
No code change, only move code from main.c to
arm/cpu_loop.c and duplicate some macro
defined for both arm and aarch64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-5-laurent@vivier.eu>
No code change, only move code from main.c to
aarch64/cpu_loop.c and duplicate some macro
defined for both arm and aarch64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-4-laurent@vivier.eu>
No code change, only move code from main.c to
i386/cpu_loop.c.
Include i386/cpu_loop.c in x86_64/cpu_loop.c
to avoid to duplicate code.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-3-laurent@vivier.eu>
Create a cpu_loop-common.h for future use by
these new files and use it in the existing
main.c
Introduce target_cpu_copy_regs():
declare the function in cpu_loop-common.h
and an empty function for each target,
to move all the cpu_loop prologues to this function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and call it only if the macro is defined.
Move declarations of setup_frame() and setup_rt_frame() to
linux-user/signal-common.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
No code change, only move code from signal.c to
ppc/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-20-laurent@vivier.eu>
No code change, only move code from signal.c to
mips/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
mips64/signal.c includes mips/signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-19-laurent@vivier.eu>
No code change, only move code from signal.c to
sparc/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
sparc64/signal.c includes sparc/signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-18-laurent@vivier.eu>
No code change, only move code from signal.c to
i386/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
x86_64/signal.c includes i386/signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-17-laurent@vivier.eu>
No code change, only move code from signal.c to
xtensa/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-16-laurent@vivier.eu>
No code change, only move code from signal.c to
hppa/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-15-laurent@vivier.eu>
No code change, only move code from signal.c to
riscv/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-14-laurent@vivier.eu>
No code change, only move code from signal.c to
tilegx/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180424192635.6027-13-laurent@vivier.eu>
No code change, only move code from signal.c to
alpha/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-12-laurent@vivier.eu>
No code change, only move code from signal.c to
m68k/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-11-laurent@vivier.eu>
No code change, only move code from signal.c to
s390x/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-10-laurent@vivier.eu>
No code change, only move code from signal.c to
openrisc/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-9-laurent@vivier.eu>
No code change, only move code from signal.c to
nios2/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-8-laurent@vivier.eu>
No code change, only move code from signal.c to
cris/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-7-laurent@vivier.eu>
No code change, only move code from signal.c to
microblaze/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-6-laurent@vivier.eu>
No code change, only move code from signal.c to
sh4/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-5-laurent@vivier.eu>
No code change, only move code from signal.c to
arm/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-4-laurent@vivier.eu>
No code change, only move code from signal.c to
aarch64/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-3-laurent@vivier.eu>
Create a signal-common.h for future use by these new files
and use it in the existing signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
Currently we mishandle emulation of the getdents syscall for the
case of a 64 bit guest on a 32 bit host -- it defaults into
the 'host and guest same size' codepath and generates incorrect
structures in the guest buffer.
We can't easily handle the 64-on-32 case using the host getdents
syscall, because the guest struct dirent is bigger than the
host struct dirent, and we might find the host syscall has handed
us back more records than we can fit in the guest buffer after
conversion. Instead, always emulate 64-on-32 getdents with
the host getdents64. This avoids the buffer-overrun problem
because a dirent64 struct is always the same size on any host
and always larger than any architecture's dirent struct.
Reported-by: Henry Wertz <hwertz10@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180419125740.2695-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As support for RISC-V was only merged into the mainline kernel at 4.15
it is unlikely that glibc will be happy with a reported kernel version
of 3.8.0. Indeed when I testing binaries created by the current Debian
Sid compiler the tests failed with:
FATAL: kernel too old
Bump the version to the minimum a RISC-V glibc would expect:
https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/riscv/configure.ac
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180425100218.24785-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In commit 8c5931de0a we added support for SVE extended
sigframe records. These mean that the signal frame might now be
larger than the size of the target_rt_sigframe record, so make sure
we call lock_user on the entire frame size when we're creating it.
(The code for restoring the signal frame already correctly handles
the extended records by locking the 'extra' section separately to the
main section.)
In particular, this fixes a bug even for non-SVE signal frames,
because it extends the locked section to cover the
target_rt_frame_record. Previously this was part of 'struct
target_rt_sigframe', but in commit e1eecd1d9d we pulled
it out into its own struct, and so locking the target_rt_sigframe
alone doesn't cover it. This bug would mean that we would fail
to correctly handle the case where a signal was taken with
SP pointing 16 bytes into an unwritable page, with the page
immediately below it in memory being writable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
AArch64 stack frames include a 'frame record' which holds a pointer
to the next frame record in the chain and the LR on entry to the
function. The procedure calling standard doesn't mandate where
exactly this frame record is in the stack frame, but for signal
frames the kernel puts it right at the top. We used to put it
there too, but in commit 7f0f4208b3 we accidentally put
the "enlarge to the 4K reserved space minimum" check after the
"allow for the frame record" code, rather than before it, with
the effect that the frame record would be inside the reserved
space and immediately after the last used part of it.
Move the frame record back out of the reserved space to where
we used to put it.
This bug shouldn't break any sensible guest code, but test
programs that deliberately look at the internal details
of the signal frame layout will not find what they are
expecting to see.
Fixes: 7f0f4208b3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20180412140222.2096-1-peter.maydell@linaro.org
Add support for the two currently defined HWCAP bits on MIPS - R6 and
MSA.
Buglink: https://bugs.launchpad.net/qemu/+bug/1754372
Signed-off-by: James Cowgill <james.cowgill@mips.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180315151348.6451-1-james.cowgill@mips.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
get_sigframe() uses regs[1] and this is actual SP.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180409115212.875-1-laurent@vivier.eu>
The AArch64 signal frame design was extended for SVE in commit
8c5931de0a, so that instead of having a fixed setup we
now add various records to the frame, with some of them possibly
overflowing into an extra space outside the original 4K reserved
block in the target_sigcontext. However, we failed to ensure that we
always at least allocate the 4K reserved block. This is ABI, and
some userspace programs rely on it. In particular the dash shell
would segfault if the frame wasn't as big enough.
(Compare the kernel's sigframe_size() function in
arch/arm64/kernel/signal.c.)
Reported-by: Richard Henwood <richard.henwood@arm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180409140714.26841-1-peter.maydell@linaro.org
Fixes: https://bugs.launchpad.net/bugs/1761535
Fixes: 8c5931de0a
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
preadv/pwritev accept low and high parts of file offset in two separate
parameters. When host bitness doesn't match guest bitness these parts
must be appropriately recombined.
Introduce target_to_host_low_high that does this recombination and use
it in preadv/pwritev syscalls.
This fixes glibc testsuite test misc/tst-preadvwritev64.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Sparc as an extended sigaction structure containing
the field ka_restorer used in place of sa_restorer.
Define TARGET_ARCH_HAS_KA_RESTORER and use it
with sparc.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180402102453.9883-2-laurent@vivier.eu>
setup_frame() doesn't set correctly the address of the trampoline code.
The offset of retcode array must be added to the stack frame address.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180401204653.14211-1-laurent@vivier.eu>
fadvise64_64 on xtensa passes advice as the second argument and so must
be handled similar to PPC.
This fixes glibc testsuite tests posix/tst-posix_fadvise and
posix/tst-posix_fadvise64.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
host_to_target_timespec may return error if target address could not be
locked, but it is ignored.
Propagate return value of host_to_target_timespec to the caller of
clock_gettime.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- make target_ipc_perm fields match kernel definitions for xtensa;
- add target_semid64_ds with proper order of times and reserved fields
for little/big endian specific for xtensa;
- add missing reserved fields after time fields to the target_shmid_ds;
- fix types of shm_cpid, shm_lpid and shm_nattch fields of
target_shmid_ds to match kernel definitions for xtensa.
These changes fix guest ipcs output and fix glibc testsuite tests
sysvipc/test-sysvsem and sysvipc/test-sysvshm.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
mq_getsetattr implementation does not set errno correctly in case of
error. Also in the presence of both 2nd and 3rd arguments it calls both
mq_getattr and mq_setattr, whereas only the latter call would suffice.
Don't call mq_getattr in the presence of the 2nd argument. Don't copy
output back to user in case of error. Use get_errno to set errno value.
This fixes test rt/tst-mqueue2 from the glibc testsuite.
Cc: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
cpu_copy adds newly created CPU object to container/machine/unattached,
but does it w/o proper locking. As a result when multiple threads create
threads rapidly QEMU may abort with the following message:
GLib-CRITICAL **: g_hash_table_iter_next: assertion
'ri->version == ri->hash_table->version' failed
ERROR:qemu/qom/object.c:1663:object_get_canonical_path_component:
code should not be reached
E.g. this issue is observed when running glibc test nptl/tst-eintr1.
Move cpu_copy invocation under clone_lock to fix that.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In case of syscall restart request set pc back to the syscall
instruction.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
flush_window_regs uses wrong stack frame to save overflow registers in
call8 and call12 frames, which results in wrong register values in
callers of a function that received a signal.
Reimplement flush_window_regs closely following window overflow
sequence.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
At a fixed distance after the usable memory that init_guest_space maps, for
32-bit ARM targets we also need to map a commpage. The normal
init_guest_space logic doesn't keep this in mind when searching for an
address range.
If !host_start, then try to find a big continuous segment where we can put
both the usable memory and the commpage; we then munmap that segment and
set current_start to that address; and let the normal code mmap the usable
memory and the commpage separately. That is: if we don't have hint of
where to start looking for memory, come up with one that is better than
NULL. Depending on host_size and guest_start, there may or may not be a
gap between the usable memory and the commpage, so this is slightly more
restrictive than it needs to be; but it's only a hint, so that's OK.
We only do that for !host start, because if host_start, then either:
- we got an address passed in with -B, in which case we don't want to
interfere with what the user said;
- or host_start is based off of the ELF image's loaddr. The check "if
(host_start && real_start != current_start)" suggests that we really
want lowest available address that is >= loaddr. I don't know why that
is, but I'm trusting that Paul Brook knew what he was doing when he
wrote the original version of that check in
c581deda32 way back in 2010.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-11-lukeshu@lukeshu.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
With all targets defining CPU_RESOLVING_TYPE, refactor
cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model)
so that callers won't have to know internal resolving cpu
type. Place it in exec.c so it could be called from both
target independed vl.c and *-user/main.c.
That allows us to stop abusing cpu type from
MachineClass::default_cpu_type
as resolver class in vl.c which were confusing part of
cpu_parse_cpu_model().
Also with new parse_cpu_model(), the last users of cpu_init()
in null-machine.c and bsd/linux-user targets could be switched
to cpu_create() API and cpu_init() API will be removed by
follow up patch.
With no longer users left remove MachineState::cpu_model field,
new code should use MachineState::cpu_type instead and
leave cpu_model parsing to generic code in vl.c.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com>
[ehabkost: Fix bsd-user build error]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
-----BEGIN PGP SIGNATURE-----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=UCny
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20180316-xtensa' into staging
target/xtensa linux-user support.
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
# gpg: Signature made Fri 16 Mar 2018 16:46:19 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/20180316-xtensa:
MAINTAINERS: fix W: address for xtensa
qemu-binfmt-conf.sh: add qemu-xtensa
target/xtensa: add linux-user support
linux-user: drop unused target_msync function
linux-user: fix target_mprotect/target_munmap error return values
linux-user: fix assertion in shmdt
linux-user: fix mmap/munmap/mprotect/mremap/shmat
target/xtensa: support MTTCG
target/xtensa: use correct number of registers in gdbstub
target/xtensa: mark register windows in the dump
target/xtensa: dump correct physical registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# linux-user/syscall.c
Import list of syscalls from the kernel source. Conditionalize code/data
that is only used with softmmu. Implement exception handlers. Implement
signal hander (only the core registers for now, no coprocessors or TIE).
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
target_msync is not used, remove its declaration and implementation.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
target_mprotect/target_munmap return value goes through get_errno at the
call site, thus the functions must either set errno to host error code
and return -1 or return negative guest error code. Do the latter.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In linux-user QEMU that runs for a target with TARGET_ABI_BITS bigger
than L1_MAP_ADDR_SPACE_BITS an assertion in page_set_flags fires when
mmap, munmap, mprotect, mremap or shmat is called for an address outside
the guest address space. mmap and mprotect should return ENOMEM in such
case.
Change definition of GUEST_ADDR_MAX to always be the last valid guest
address. Account for this change in open_self_maps.
Add macro guest_addr_valid that verifies if the guest address is valid.
Add function guest_range_valid that verifies if address range is within
guest address space and does not wrap around. Use that macro in
mmap/munmap/mprotect/mremap/shmat for error checking.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
If the ensure-alignment code gets triggered, then the
"if (host_start && real_start != current_start)" check will always trigger,
so save 2 syscalls and put that check first.
Note that we can't just switch to using MAP_FIXED for that check, because
then we couldn't differentiate between a failure because "there isn't
enough space" and "there isn't enough space *here*".
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-9-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Instead of doing
if (check1) {
if (check2) {
success;
}
}
retry;
Do a clearer
if (!check1) {
goto try_again;
}
if (!check2) {
goto try_again;
}
success;
try_again:
retry;
Besides being clearer, this makes it easier to insert more checks that
need to trigger a retry on check failure, or rearrange them, or anything
like that.
Because some indentation is changing, "ignore space change" may be useful
for viewing this patch.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-8-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[lv: modified to try again fi valid == 0, not valid == -1 (error case)]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are 3 parts to this change:
- Add a comment showing the relative sizes and positions of the blocks of
memory
- introduce and use new aligned_{start,size} instead of adjusting
real_{start_size}
- When we clean up (on failure), munmap(real_start, real_size) instead of
munmap(aligned_start, aligned_size). It *shouldn't* make any
difference, but I will admit that this does mean we are making the
syscall with different values, so this isn't quite a no-op patch.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-6-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
init_guest_commpage needs to check if the mapped space, which ends at
real_start+real_size overlaps with where it needs to put the commpage,
which is (assuming sane qemu_host_page_size) guest_base + 0xffff000, where
guest_base is real_start - guest_start.
[guest_base][ 0xffff0000 ][commpage]
[guest_base][guest_start][real_size] [commpage]
[ real_start ][real_size] [commpage]
^
fail if this gap < 0
Since init_guest_commpage wants to do everything relative to guest_base
(rather than real_start), it obviously needs to be comparing 0xffff0000
against guest_start+real_size, not just real_size.
This bug has been present since 806d102141 in
2012, but guest_start is usually 0, and prior to v2.11 real_size was
usually much smaller than 0xffff0000, so it was uncommon for it to have
made a difference.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-5-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We'll just exit with an error anyway, so it doesn't really matter, but it
is cleaned up in all of the other places were we error out.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-4-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
init_guest_commpage is a much more honest description of what the function
does. validate_guest_space not only suggests that the function has no
side-effects, but also introduces confusion as to why it is only needed on
32-bit ARM targets.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-3-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Instead of defining a bogus validate_guest_space that always returns 1 on
targets other than 32-bit ARM, use #if blocks to only call it on 32-bit ARM
targets. This makes the "normal" flow control clearer.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-2-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[lv: fix condition to "!= 1" as requested by Peter]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
target_mprotect/target_munmap return value goes through get_errno at the
call site, thus the functions must either set errno to host error code
and return -1 or return negative guest error code. Do the latter.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180228221609.11265-8-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In linux-user QEMU that runs for a target with TARGET_ABI_BITS bigger
than L1_MAP_ADDR_SPACE_BITS an assertion in page_set_flags fires when
mmap, munmap, mprotect, mremap or shmat is called for an address outside
the guest address space. mmap and mprotect should return ENOMEM in such
case.
Change definition of GUEST_ADDR_MAX to always be the last valid guest
address. Account for this change in open_self_maps.
Add macro guest_addr_valid that verifies if the guest address is valid.
Add function guest_range_valid that verifies if address range is within
guest address space and does not wrap around. Use that macro in
mmap/munmap/mprotect/mremap/shmat for error checking.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180307215010.30706-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now we've dropped unicore32, all of the architectures we support
for linux-user implement the signal handling routines. The
dummy "just print a message" versions are unimplemented, so we
can drop them entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180308144733.25615-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We dropped the unicore32-linux-user target in commit 5e2b40f727
in 2016. Nobody has made any attempt to fix the issues that
caused us to drop it, so remove the associated code.
(The system emulation parts of unicore32 remain.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180308144733.25615-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Depending on the currently selected size of the SVE vector registers,
we can either store the data within the "standard" allocation, or we
may beedn to allocate additional space with an EXTRA record.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180303143823.27055-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EXTRA record allows for additional space to be allocated
beyon what is currently reserved. Add code to emit and read
this record type.
Nothing uses extra space yet.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180303143823.27055-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This changes the qemu signal frame layout to be more like the kernel's,
in that the various records are dynamically allocated rather than fixed
in place by a structure.
For now, all of the allocation is out of uc.tuc_mcontext.__reserved,
so the allocation is actually trivial. That will change with SVE support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180303143823.27055-4-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out helpers from target_setup_frame and target_restore_sigframe
for dealing with general registers, fpsimd registers, and the end record.
When we add support for sve registers, the relative positions of
these will change.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180303143823.27055-3-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As an implementation choice, widening VL has zeroed the
previously inaccessible portion of the sve registers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180303143823.27055-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implementation of linux user emulation for RISC-V.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Not enabled anywhere yet.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not enabled anywhere yet.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set the appropriate Linux hwcap bits to tell the guest binary if we
have implemented half-precision floating point support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
So here we need to detect the version of binaries and set
cpu_model for it.
Signed-off-by: YunQiang Su <syq@debian.org>
[lv: original patch modified to move code into cpu_get_model()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180220173307.25125-5-laurent@vivier.eu>
M680x0 doesn't support the same set of instructions
as ColdFire, so we can't use "any" CPU type to execute
m68020 instructions.
We select CPU type ("m68040" or "any" for ColdFire)
according to the ELF header. If we can't, we
use by default the value used until now: "any".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180220173307.25125-4-laurent@vivier.eu>
Add a function to return ELF e_flags and use it
to select the CPU model.
Signed-off-by: YunQiang Su <syq@debian.org>
[lv: split the patch and some cleanup in get_elf_eflags()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180220173307.25125-3-laurent@vivier.eu>
Instead of a sequence of "#if ... #endif" move the
selection to a function in linux-user/*/target_elf.h
We can't add them in linux-user/*/target_cpu.h
because we will need to include "elf.h" to
use ELF flags with eflags, and including
"elf.h" in "target_cpu.h" introduces some
conflicts in elfload.c
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
Back when we used to support compiling either with or without
NPTL threading library support, we used a macro THREAD which would
expand either to nothing (no thread support) or to __thread (threads
supported). For a long time now we have required thread support,
so remove the macro and just use __thread directly as other parts
of QEMU do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180213132246.26844-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We properly computed the capped mask size to be put to the application
buffer, but didn't actually used it. Also, we need to return the capped mask
size instead of 0 on success.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180211174704.27441-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This unbreaks the testcase from
http://lists.nongnu.org/archive/html/qemu-arm/2018-01/msg00514.html
Thanks to Laurent Vivier for spotting the 7th one.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Suggested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <671eaa99f4e0bf3a58f76f9151f7cfa24662227f.1517565566.git.agx@sigxcpu.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmbmhdosb9.fsf_-_@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----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=DMbf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging
Miscellaneous patches for 2018-02-07
# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2018-02-07-v4:
Move include qemu/option.h from qemu-common.h to actual users
Drop superfluous includes of qapi/qmp/qjson.h
Drop superfluous includes of qapi/qmp/dispatch.h
Include qapi/qmp/qnull.h exactly where needed
Include qapi/qmp/qnum.h exactly where needed
Include qapi/qmp/qbool.h exactly where needed
Include qapi/qmp/qstring.h exactly where needed
Include qapi/qmp/qdict.h exactly where needed
Include qapi/qmp/qlist.h exactly where needed
Include qapi/qmp/qobject.h exactly where needed
qdict qlist: Make most helper macros functions
Eliminate qapi/qmp/types.h
Typedef the subtypes of QObject in qemu/typedefs.h, too
Include qmp-commands.h exactly where needed
Drop superfluous includes of qapi/qmp/qerror.h
Include qapi/error.h exactly where needed
Drop superfluous includes of qapi-types.h and test-qapi-types.h
Clean up includes
Use #include "..." for our own headers, <...> for others
vnc: use stubs for CONFIG_VNC=n dummy functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the new ARMv8.2 SHA-3, SM3, SM4 and SHA-512 instructions to
AArch64 user mode emulation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20180207111729.15737-6-ard.biesheuvel@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the change
to target/s390x/gen-features.c manually reverted, and blank lines
around deletions collapsed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-3-armbru@redhat.com>
We dropped support for ia64 host CPUs in the 2.11 release (removing
the TCG backend for it, and advertising the support as being
completely removed in the changelog). However there are a few bits
and pieces of code still floating about. Remove those, too.
We can drop the check in configure for "ia64 or hppa host?"
entirely, because we don't support hppa hosts either any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1516897189-11035-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SPARC code in linux-user/signal.c defines a set of
MC_* constants. On some SPARC hosts these are also defined
by sys/ucontext.h, resulting in build failures:
linux-user/signal.c:2786:0: error: "MC_NGREG" redefined [-Werror]
#define MC_NGREG 19
In file included from /usr/include/signal.h:302:0,
from include/qemu/osdep.h:86,
from linux-user/signal.c:19:
/usr/include/sparc64-linux-gnu/sys/ucontext.h:59:0: note: this is the location of the previous definition
# define MC_NGREG __MC_NGREG
Rename all these constants to SPARC_MC_* to avoid the clash.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1517318239-15764-1-git-send-email-peter.maydell@linaro.org
Helpers that return a pointer into env->vfp.regs so that we isolate
the logic of how to index the regs array for different cpu modes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-7-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is needed for new architectures like RISC-V which do not provide any
other rename-like syscall.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvm607su9qs.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Marco A L Barbosa <malbarbo@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180111183714.22834-2-malbarbo@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
sched_get/setaffinity linux-user syscalls were missing conversions for
little/big endian, which is hairy since longs may not be the same size
either.
For simplicity, this just introduces loops to convert bit by bit like is
done for select.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180109201643.1479-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
mmap() is required by the linux kernel ABI and POSIX to return a
non-NULL address when the implementation chooses a start address for the
mapping.
The current implementation of mmap_find_vma_reserved() can return NULL
as start address of a mapping which leads to subsequent crashes inside
the guests glibc, e.g. output of qemu-arm-static --strace executing a
test binary stx_test:
1879 mmap2(NULL,8388608,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANONYMOUS|0x20000,-1,0) = 0x00000000
1879 write(2,0xf6fd39d0,79) stx_test: allocatestack.c:514: allocate_stack: Assertion `mem != NULL' failed.
This patch fixes mmap_find_vma_reserved() by skipping NULL as start
address while searching for a suitable mapping start address.
CC: Riku Voipio <riku.voipio@iki.fi>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Maximilian Riemensberger <riemensberger@cadami.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1515286904-86418-1-git-send-email-riemensberger@cadami.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The third argument to dup3() is a flags word which may be
O_CLOEXEC. We weren't translating this flag from target to
host value, which meant that if the target used a different
value from the host (eg sparc guest and x86 host) the dup3()
call would fail EINVAL. Do the correct translation.
Fixes: https://bugs.launchpad.net/qemu/+bug/1704658
Reported-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1513351080-25917-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Linux struct cmsghdr is already guaranteed to be sufficiently
aligned that CMSG_ALIGN(sizeof struct cmsghdr) is always equal
to sizeof struct cmsghdr. Stop doing the unnecessary alignment
arithmetic for host and target cmsghdr.
This follows kernel commit 1ff8cebf49ed9e9ca2 and brings our
TARGET_CMSG_* macros back into line with the kernel ones,
as well as making them easier to understand.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1513345976-22958-3-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The handling of length calculations in host_to_target_cmsg()
was rather confused:
* when checking for whether the target cmsg header fit in
the remaining buffer, we were using the host struct size,
not the target size
* we were setting tgt_len to "target payload + header length"
but then using it as if it were the target payload length alone
* in various message type cases we weren't handling the possibility
that host or target buffers were truncated
Fix these problems. The second one in particular is liable
to result in us overrunning the guest provided buffer,
since we will try to convert more data than is actually
present.
Fixes: https://bugs.launchpad.net/qemu/+bug/1701808
Reported-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1513345976-22958-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When we do a fork() in usermode emulation, we need to be in
a start/end exclusive section, so that we can ensure that no
other thread is in an RCU section. Otherwise you can get this
deadlock:
- fork thread: has mmap_lock, waits for rcu_sync_lock
(because rcu_init_lock() is registered as a pthread_atfork() hook)
- RCU thread: has rcu_sync_lock, waits for rcu_read_(un)lock
- another CPU thread: in RCU critical section, waits for mmap_lock
This can show up if you have a heavily multithreaded guest program
that does a fork().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Stuart Monteith <stuart.monteith@linaro.org>
Message-Id: <1512650481-1723-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our locking order is that the tb lock should be taken
inside the mmap_lock, but fork_start() grabs locks the
other way around. This means that if a heavily multithreaded
guest process (such as Java) calls fork() it can deadlock,
with the thread that called fork() stuck in fork_start()
with the tb lock and waiting for the mmap lock, but some
other thread in tb_find() with the mmap lock and waiting
for the tb lock. The cpu_list_lock() should also always be
taken last, not first.
Fix this by making fork_start() grab the locks in the
right order. The order in which we drop locks doesn't
matter, so we leave fork_end() the way it is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1512397331-15238-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our copy of the nwfpe code for emulating of the old FPA11 floating
point unit doesn't check the coprocessor number in the instruction
when it emulates it. This means that we might treat some
instructions which should really UNDEF as being FPA11 instructions by
accident.
The kernel's copy of the nwfpe code doesn't make this error; I suspect
the bug was noticed and fixed as part of the process of mainlining
the nwfpe code more than a decade ago.
Add a check that the coprocessor number (which is always in bits
[11:8] of the instruction) is either 1 or 2, which is where the
FPA11 lives.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since for aarch64 the signal trampoline is synthesized directly into the
signal frame we need to make sure the instructions end up little-endian.
Otherwise the wrong endianness will cause a SIGILL upon return from the
signal handler on big-endian targets.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-4-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make big-endian aarch64 systems identify as aarch64_be as expected by
big-endian userland and toolchains.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-3-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable big-endian mode for data accesses on aarch64 for big-endian linux
user mode. Activate it for all exception levels as documented by ARM:
Set the SCTLR EE bit for ELs 1 through 3. Additionally set bit E0E in
EL1 to enable it in EL0 as well.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-2-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
chk and chk2 compare a value to boundaries, and
trigger a CHK exception if the value is out of bounds.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-8-laurent@vivier.eu>
Use cpu_m68k_get_ccr()/cpu_m68k_set_ccr() to setup and restore correctly
the value of SR in the context structure. Fix target_rt_setup_ucontext().
Fixes: 3219de458c ("linux-user: correctly manage SR in ucontext")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-4-laurent@vivier.eu>
As for other targets, cmpxchg isn't quite right for ll/sc,
suffering from an ABA race, but is sufficient to implement
portable atomic operations.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170907185057.23421-2-richard.henderson@linaro.org>
[aurel32: fix whitespace]
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thanks to Laszlo Ersek for spotting the double semicolon in target/i386/kvm.c
I have trivially grepped the tree for ';;' in C files.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In commit 7c4ee5bcc8 we changed the order in which we construct
the AUXV, but forgot to adjust the calculation of the length. The
result is that we set info->auxv_len to a bogus and negative value,
and then later on the code in open_self_auxv() gets confused and
ends up presenting the guest with an empty file.
Since we now have to calculate the auxv length up-front as part
of figuring out how much we're going to put on the stack, set
info->auxv_len then; this allows us to assert that we put the
same number of entries into auxv as we pre-calculated, rather
than merely having a comment saying we need to do that.
Fixes: https://bugs.launchpad.net/qemu/+bug/1728116
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
SPARC is like Alpha in its handling of the rt_sigaction syscall:
it takes an extra parameter 'restorer' which needs to be copied
into the sa_restorer field of the sigaction struct. The order
of the arguments differs slightly between SPARC and Alpha but
the implementation is otherwise the same. (Compare the
rt_sigaction() functions in arch/sparc/kernel/sys_sparc_64.c
and arch/alpha/kernel/signal.c.)
Note that this change is somewhat moot until SPARC acquires
support for actually delivering RT signals.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For faults on loads and stores, ppc_cpu_handle_mmu_fault() in
target/ppc/user_only_helper.c stores the offending address
in env->spr[SPR_DAR]. Report this correctly to the guest
in si_addr, rather than incorrectly using the address of the
instruction that caused the fault.
This fixes the test case in
https://bugs.launchpad.net/qemu/+bug/1077116
for ppc, ppc64 and ppc64le.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For s390x, the address passed to a signal handler in the
siginfo_t si_addr field is masked (in the kernel this is done in
do_sigbus() and do_sigsegv() in arch/s390/mm/fault.c). Implement
this architecture-specific oddity in linux-user.
This is one of the issues described in
https://bugs.launchpad.net/qemu/+bug/1705118
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If an application tries to install a seccomp filter using
prctl(PR_SET_SECCOMP), the filter is likely for the target instead of the host
architecture. This will probably cause qemu to be immediately killed when it
executes another syscall.
Prevent this from happening by returning EINVAL from both seccomp prctl
calls. This is the error returned by the kernel when seccomp support is
disabled.
Fixes: https://bugs.launchpad.net/qemu/+bug/1726394
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: James Cowgill <james.cowgill@mips.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fixes: https://bugs.launchpad.net/qemu/+bug/1716767
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add the missing defines and for TARGET_MAP_STACK and TARGET_MAP_HUGETLB
for alpha, mips, ppc, x86, hppa. Fix the mmap_flags translation table
to translate MAP_HUGETLB between host and target architecture, and to
drop MAP_STACK.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20170311183016.GA20514@ls3530.fritz.box>
[rth: Drop MAP_STACK instead of translating it, since it is ignored
in the kernel anyway. Fix tabs to spaces.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TARGET_MAP_TYPE needs to be 0x03 instead of 0x0f on the hppa
architecture, otherwise it conflicts with MAP_FIXED which is 0x04.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-ID: <20170311175019.GA7195@ls3530.fritz.box>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
By failing to return from the syscall in the child, the child
issues another clone syscall and hilarity ensues.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reading and writing to an sa_restorer member that isn't supposed to
exist corrupts user memory. Introduce TARGET_ARCH_HAS_SA_RESTORER,
similar to the kernel's __ARCH_HAS_SA_RESTORER.
Reported-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
currently for sh4 cpu_model argument for '-cpu' option
could be either 'cpu model' name or cpu_typename.
however typically '-cpu' takes 'cpu model' name and
cpu type for sh4 target isn't advertised publicly
('-cpu help' prints only 'cpu model' names) so we
shouldn't care about this use case (it's more of a bug).
1. Drop '-cpu cpu_typename' to align with the rest of
targets.
2. Compose searched for typename from cpu model and use
it with object_class_by_name() directly instead of
over-complicated
object_class_get_list()
g_slist_find_custom() + superh_cpu_name_compare()
With #1 droped, #2 could be used for both lookups which
simplifies superh_cpu_class_by_name() quite a bit.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1507211474-188400-23-git-send-email-imammedo@redhat.com>
[ehabkost: Include fixup sent by Igor]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This enables parallel TCG code generation. However, we do not take
advantage of it yet since tb_lock is still held during tb_gen_code.
In user-mode we use a single TCG context; see the documentation
added to tcg_region_init for the rationale.
Note that targets do not need any conversion: targets initialize a
TCGContext (e.g. defining TCG globals), and after this initialization
has finished, the context is cloned by the vCPU threads, each of
them keeping a separate copy.
TCG threads claim one entry in tcg_ctxs[] by atomically increasing
n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's
of that variable and tcg_ctxs; they are there just to play nice with
analysis tools such as thread sanitizer.
Note that we do not allocate an array of contexts (we allocate
an array of pointers instead) because when tcg_context_init
is called, we do not know yet how many contexts we'll use since
the bool behind qemu_tcg_mttcg_enabled() isn't set yet.
Previous patches folded some TCG globals into TCGContext. The non-const
globals remaining are only set at init time, i.e. before the TCG
threads are spawned. Here is a list of these set-at-init-time globals
under tcg/:
Only written by tcg_context_init:
- indirect_reg_alloc_order
- tcg_op_defs
Only written by tcg_target_init (called from tcg_context_init):
- tcg_target_available_regs
- tcg_target_call_clobber_regs
- arm: arm_arch, use_idiv_instructions
- i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt,
have_movbe, have_popcnt
- mips: use_movnz_instructions, use_mips32_instructions,
use_mips32r2_instructions, got_sigill (tcg_target_detect_isa)
- ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr
- s390: tb_ret_addr, s390_facilities
- sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines),
use_vis3_instructions
Only written by tcg_prologue_init:
- 'struct jit_code_entry one_entry'
- aarch64: tb_ret_addr
- arm: tb_ret_addr
- i386: tb_ret_addr, guest_base_flags
- ia64: tb_ret_addr
- mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is groundwork for supporting multiple TCG contexts.
The naive solution here is to split code_gen_buffer statically
among the TCG threads; this however results in poor utilization
if translation needs are different across TCG threads.
What we do here is to add an extra layer of indirection, assigning
regions that act just like pages do in virtual memory allocation.
(BTW if you are wondering about the chosen naming, I did not want
to use blocks or pages because those are already heavily used in QEMU).
We use a global lock to serialize allocations as well as statistics
reporting (we now export the size of the used code_gen_buffer with
tcg_code_size()). Note that for the allocator we could just use
a counter and atomic_inc; however, that would complicate the gathering
of tcg_code_size()-like stats. So given that the region operations are
not a fast path, a lock seems the most reasonable choice.
The effectiveness of this approach is clear after seeing some numbers.
I used the bootup+shutdown of debian-arm with '-tb-size 80' as a benchmark.
Note that I'm evaluating this after enabling per-thread TCG (which
is done by a subsequent commit).
* -smp 1, 1 region (entire buffer):
qemu: flush code_size=83885014 nb_tbs=154739 avg_tb_size=357
qemu: flush code_size=83884902 nb_tbs=153136 avg_tb_size=363
qemu: flush code_size=83885014 nb_tbs=152777 avg_tb_size=364
qemu: flush code_size=83884950 nb_tbs=150057 avg_tb_size=373
qemu: flush code_size=83884998 nb_tbs=150234 avg_tb_size=373
qemu: flush code_size=83885014 nb_tbs=154009 avg_tb_size=360
qemu: flush code_size=83885014 nb_tbs=151007 avg_tb_size=370
qemu: flush code_size=83885014 nb_tbs=151816 avg_tb_size=367
That is, 8 flushes.
* -smp 8, 32 regions (80/32 MB per region) [i.e. this patch]:
qemu: flush code_size=76328008 nb_tbs=141040 avg_tb_size=356
qemu: flush code_size=75366534 nb_tbs=138000 avg_tb_size=361
qemu: flush code_size=76864546 nb_tbs=140653 avg_tb_size=361
qemu: flush code_size=76309084 nb_tbs=135945 avg_tb_size=375
qemu: flush code_size=74581856 nb_tbs=132909 avg_tb_size=375
qemu: flush code_size=73927256 nb_tbs=135616 avg_tb_size=360
qemu: flush code_size=78629426 nb_tbs=142896 avg_tb_size=365
qemu: flush code_size=76667052 nb_tbs=138508 avg_tb_size=368
Again, 8 flushes. Note how buffer utilization is not 100%, but it
is close. Smaller region sizes would yield higher utilization,
but we want region allocation to be rare (it acquires a lock), so
we do not want to go too small.
* -smp 8, static partitioning of 8 regions (10 MB per region):
qemu: flush code_size=21936504 nb_tbs=40570 avg_tb_size=354
qemu: flush code_size=11472174 nb_tbs=20633 avg_tb_size=370
qemu: flush code_size=11603976 nb_tbs=21059 avg_tb_size=365
qemu: flush code_size=23254872 nb_tbs=41243 avg_tb_size=377
qemu: flush code_size=28289496 nb_tbs=52057 avg_tb_size=358
qemu: flush code_size=43605160 nb_tbs=78896 avg_tb_size=367
qemu: flush code_size=45166552 nb_tbs=82158 avg_tb_size=364
qemu: flush code_size=63289640 nb_tbs=116494 avg_tb_size=358
qemu: flush code_size=51389960 nb_tbs=93937 avg_tb_size=362
qemu: flush code_size=59665928 nb_tbs=107063 avg_tb_size=372
qemu: flush code_size=38380824 nb_tbs=68597 avg_tb_size=374
qemu: flush code_size=44884568 nb_tbs=79901 avg_tb_size=376
qemu: flush code_size=50782632 nb_tbs=90681 avg_tb_size=374
qemu: flush code_size=39848888 nb_tbs=71433 avg_tb_size=372
qemu: flush code_size=64708840 nb_tbs=119052 avg_tb_size=359
qemu: flush code_size=49830008 nb_tbs=90992 avg_tb_size=362
qemu: flush code_size=68372408 nb_tbs=123442 avg_tb_size=368
qemu: flush code_size=33555560 nb_tbs=59514 avg_tb_size=378
qemu: flush code_size=44748344 nb_tbs=80974 avg_tb_size=367
qemu: flush code_size=37104248 nb_tbs=67609 avg_tb_size=364
That is, 20 flushes. Note how a static partitioning approach uses
the code buffer poorly, leading to many unnecessary flushes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TARGET_MTIOCTOP/TARGET_MTIOCGET/TARGET_MTIOCPOS values
were being defined in terms of host struct types, but
these structures are such that their size might differ
on different hosts. Switch to using a target struct
definition instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This adds the -dfilter support to linux-user. There is a minor
checkpatch complaint about formatting which I've ignored for aesthetic
reasons.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We were defining TARGET_FS_IOC_GETFLAGS and TARGET_FS_IOC_SETFLAGS
using the host 'long' type in the size field, which meant that
they had the wrong values if the host and guest had different
sized longs. Switch to abi_long instead.
This fixes a bug where these ioctls don't work on 32-bit guests
on 64-bit hosts (and makes the LTP test 'setxattr03' pass
where it did not previously.)
Reported-by: pgndev <pgnet.dev@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We had a check using TARGET_VIRT_ADDR_SPACE_BITS to make sure
that the allocation coming in from the command-line option was
not too large, but that didn't include target-specific knowledge
about other restrictions on user-space.
Remove several target-specific hacks in linux-user/main.c.
For MIPS and Nios, we can replace them with proper adjustments
to the respective target's TARGET_VIRT_ADDR_SPACE_BITS definition.
For ARM, we had no existing ifdef but I suspect that the current
default value of 0xf7000000 was chosen with this in mind. Define
a workable value in linux-user/arm/, and also document why the
special case is required.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20170708025030.15845-3-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 32-bit ARM validate_guest_space() check tests whether the
specified -R value leaves enough space for us to put the
commpage in at 0xffff0f00. However it was incorrectly doing
a <= check for the check against (guest_base + guest_size),
which meant that it wasn't permitting the guest space to
butt right up against the commpage.
Fix the comparison, so that -R values all the way up to 0xffff0000
work correctly.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since O_TMPFILE might differ between guest and host,
add it to the bitmask_transtbl. While at it, fix the definitions
of O_DIRECTORY etc which should arm32 according to kernel sources.
This fixes open14 and openat03 ltp testcases. Fixes:
https://bugs.launchpad.net/qemu/+bug/1709170
Almost every user of cpu_generic_init() checks for
returned NULL and then reports failure in a custom way
and aborts process.
Some users assume that call can't fail and don't check
for failure, though they should have checked for it.
In either cases cpu_generic_init() failure is fatal,
so instead of checking for failure and reporting
it various ways, make cpu_generic_init() report
errors in consistent way and terminate QEMU on failure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1505318697-77161-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make CPUSPARCState::def embedded so it would be allocated as part
of cpu instance and we won't have to worry about cleaning def pointer
up mannualy on cpu destruction.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1503592308-93913-4-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
These days, many programs are including a bug-reporting address,
or better yet, a link to the project web site, at the tail of
their --help output. However, we were not very consistent at
doing so: only qemu-nbd and qemu-qa mentioned anything, with the
latter pointing to an individual person instead of the project.
Add a new #define that sets up a uniform string, mentioning both
bug reporting instructions and overall project details, and which
a downstream vendor could tweak if they want bugs to go to a
downstream database. Then use it in all of our binaries which
have --help output.
The canned text intentionally references http:// instead of https://
because our https website currently causes certificate errors in
some browsers. That can be tweaked later once we have resolved the
web site issued.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170803163353.19558-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit a59629fcc6.
This is not needed anymore because the IOThread mutex is not
"magic" anymore (need not kick the CPU thread)and also because
fork callbacks are only enabled at the very beginning of
QEMU's execution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit bc658e4a2e.
Some versions of gcc warn about this:
linux-user/syscall.c: In function ‘do_ioctl_rt’:
linux-user/syscall.c:5577:37: error: ‘host_rt_dev_ptr’ may be used uninitialized in this function [-Werror=uninitialized]
and in particular the Travis builds fail; they use
gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3.
Revert the change to fix the travis builds.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
linux-user/syscall.c:1627:35: warning: 1st function call argument is an uninitialized value
target_saddr->sa_family = tswap16(addr->sa_family);
^~~~~~~~~~~~~~~~~~~~~~~~
linux-user/syscall.c:1629:25: warning: The left operand of '==' is a garbage value
if (addr->sa_family == AF_NETLINK && len >= sizeof(struct sockaddr_nl)) {
~~~~~~~~~~~~~~~ ^
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
not hit since 2009! :)
linux-user/elfload.c:1102:20: warning: Out of bound memory access (access exceeds upper limit of memory block)
(*regs[i]) = tswap32(env->gregs[i]);
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
glibc used to have:
typedef struct ucontext { ... } ucontext_t;
glibc now has:
typedef struct ucontext_t { ... } ucontext_t;
(See https://sourceware.org/bugzilla/show_bug.cgi?id=21457
for detail and rationale for the glibc change)
However, QEMU used "struct ucontext" in declarations. This is a
private name and compatibility cannot be guaranteed. Switch to
only using the standardized type name.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Message-id: 20170628204452.41230-1-raj.khem@gmail.com
Cc: Kamil Rytarowski <kamil@netbsd.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: Rewrote commit message, based mostly on the one from
Nathaniel McCallum]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The flags are arranged such that we can manipulate them either
a whole, or as individual bytes. The computation within
cpu_get_tb_cpu_state is now reduced to a single load and mask.
Tested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If a signal is delivered during the execution of a delay slot,
or a gUSA region, clear those bits from the environment so that
the signal handler does not start in that same state.
Cleaning the bits on signal return is paranoid good sense.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170718200255.31647-10-rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We translate gUSA regions atomically in a parallel context.
But in a serial context a gUSA region may be interrupted.
In that case, restart the region as the kernel would.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170718200255.31647-9-rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This was only used by the gdbstub and even then was only being set for
subsequent threads. Rather the continue duplicating the number just
make the gdbstub get the information from TaskState structure.
Now the tid is correctly reported for all threads the bug I was seeing
with "vCont;C04:0;c" packets is fixed as the correct tid is reported
to gdb.
I moved cpu_gdb_index into the gdbstub to facilitate easy access to
the TaskState which is used elsewhere in gdbstub.
To prevent BSD failing to build I've included ts_tid into its
TaskStruct but not populated it - which was the same state as the old
cpu->host_tid. I'll leave it up to the BSD maintainers to actually
populate this properly if they want a working gdbstub with
user-threads.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170712105216.747-4-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 32-bit PPC auxv is a bit complicated because in the
mists of time it used to be 16-aligned rather than directly
after the environment. Older glibc versions had code to
try to probe for whether it needed alignment or not:
https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/powerpc/dl-sysdep.c;hb=e84eabb3871c9b39e59323bf3f6b98c2ca9d1cd0
and the kernel has code which puts some magic entries at
the bottom to ensure that the alignment probe fails:
http://elixir.free-electrons.com/linux/latest/source/arch/powerpc/include/asm/elf.h#L158
QEMU has similar code too, but it was broken by commit
7c4ee5bcc8, which changed elfload.c from filling in
the auxv starting at the highest address and working down
to starting at the lowest address and working up. This
means that the ARCH_DLINFO hook must now be invoked first
rather than last, and the entries in it for PPC must
be reversed so that the magic AT_IGNOREPPC entries come
at the lowest address in the auxv as they should.
The effect of this was that if running a guest binary that
used an old glibc with the alignment probing the guest ld.so
code would segfault if the size of the guest environment and
argv happened to put the auxv at an address that triggered
the alignment code in the guest glibc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Richard Henderson <rth@twiddle.net>
Message-id: 1498582198-6649-1-git-send-email-peter.maydell@linaro.org
This commit adds support for printing the content of the target_siginfo_t
structure in a similar way to how it is printed by the host strace. The
pointer to this structure is sent as the last argument of the
rt_sigqueueinfo() and rt_tgsigqueueinfo() system calls.
For this purpose, print_siginfo() is used and the get_target_siginfo()
function is implemented in order to get the information obtained from
the pointer into the form that print_siginfo() expects.
The get_target_siginfo() function is based on
host_to_target_siginfo_noswap() in linux-user mode, but here both
arguments are pointers to target_siginfo_t, so instead of converting
the information to siginfo_t it just extracts and copies it to a
target_siginfo_t structure.
Prior to this commit, typical strace output used to look like this:
8307 rt_sigqueueinfo(8307,50,0x00000040007ff6b0) = 0
After this commit, it looks like this:
8307 rt_sigqueueinfo(8307,50,{si_signo=50, si_code=SI_QUEUE, si_pid=8307,
si_uid=1000, si_sigval=17716762128}) = 0
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch improves the consistentcy of the output from print_siginfo()
by removing spaces around the equal sign of si_pid, si_uid, si_timer1,
si_timer2, si_band, si_fd, si_addr, si_status and si_sigval. This way
they match si_signo and ci_code. Host strace was used as a reference
for this chage.
Prior to this commit, typical strace output used to look like this:
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This commit improves strace support for syscall rt_tgsigqueueinfo().
Prior to this commit, typical strace output used to look like this:
7775 rt_tgsigqueueinfo(7775,7775,50,1996483164,0,0) = 0
After this commit, it looks like this:
7775 rt_tgsigqueueinfo(7775,7775,50,0x76ffea5c) = 0
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add a new system call: rt_tgsigqueueinfo().
This system call is similar to rt_sigqueueinfo(), but instead of
sending the signal and data to the whole thread group with the ID
equal to the argument tgid, it sends it to a single thread within
that thread group. The ID of the thread is specified by the tid
argument.
The implementation is based on the rt_sigqueueinfo() in linux-user
mode, where the tid is added as the second argument and the
previous second and third argument become arguments three and four,
respectively.
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Conflicts:
linux-user/syscall.c
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Change the type of the first argument of rt_sigqueinfo() from int to pid_t
in the syscall declaration to match specifications of the system call.
Proper spacing is added to satisfy checkpatch.pl.
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Change the unlock_user() argument from arg1 to arg3 to match with
lock_user(), since arg3 contains the pointer to the siginfo_t structure.
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix the ssetmask() system call by removing the invocation of sigorset().
The ssetmask() system call should replace the old signal mask
with the new and return the old mask. It shouldn't combine
the old and the new mask with sigorset(). Fetching the old
mask for sigorset() is also no longer needed.
The problem was detected after running LTP test group syscalls
for the MIPS EL 32 R2 architecture where the test ssetmask01 failed
with exit code 1. The test passes now that the ssetmask() system call
is fixed.
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Improve strace support for syscall tkill(), tgkill() and rt_sigqueueinfo()
by implementing print functions that match arguments types of the system
calls and add them to the corresponding starce.list entry.
tkill:
Prior to this commit, typical strace output used to look like this:
4886 tkill(4886,50,0,4832615904,0,-9151031864016699136) = 0
After this commit, it looks like this:
4886 tkill(4886,50) = 0
tgkill:
Prior to this commit, typical strace output used to look like this:
4890 tgkill(4890,4890,50,8,4832630528,4832615904) = 0
After this commit, it looks like this:
4890 tgkill(4890,4890,50) = 0
rt_sigqueueinfo:
Prior to this commit, typical strace output used to look like this:
8307 rt_sigqueueinfo(8307,50,1996483164,0,0,50) = 0
After this commit, it looks like this:
8307 rt_sigqueueinfo(8307,50,0x00000040007ff6b0) = 0
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Improve strace support for syscalls getuid(), gettid(), getppid()
and geteuid(). Since these system calls don't have arguments, "%s()"
is added in the corresponding strace.list entry so that no arguments
are printed.
getuid:
Prior to this commit, typical strace output used to look like this:
4894 getuid(4894,0,0,274886293296,-3689348814741910323,4832615904) = 1000
After this commit, it looks like this:
4894 getuid() = 1000
gettid:
Prior to this commit, typical strace output used to look like this:
8307 gettid(0,0,64,0,4832630528,4832615840) = 8307
After this commit, it looks like this:
8307 gettid() = 8307
getppid:
Prior to this commit, typical strace output used to look like this:
20588 getppid(20588,64,0,4832630528,4832615888,0) = 20625
After this commit, it looks like this:
20588 getppid() = 20625
geteuid:
Prior to this commit, typical strace output used to look like this:
20588 geteuid(64,0,0,4832615888,0,-9151031864016699136) = 1000
After this commit, it looks like this:
20588 geteuid() = 1000
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Instead of post-processing the real contents use the remembered target
argv. That removes all traces of qemu, including command line options,
and handles QEMU_ARGV0.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Arguments passed to execve(2) call from user program could
be large, allocating stack memory for them via alloca(3) call
would lead to bad behaviour. Use 'g_new0' to allocate memory
for such arguments.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a fd is opened using inotify_init(), a read provides
one or more inotify_event structures:
struct inotify_event {
int wd;
uint32_t mask;
uint32_t cookie;
uint32_t len;
char name[];
};
The integer fields must be byte-swapped to the target endianness.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a fd is opened using eventfd(), a read provides
a 64bit counter in the host byte order, and a
write increase the internal counter by the provided
64bit value.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As for sendmsg() or sendto(), we must call the target to
host data translator if it is defined. This is needed for
eventfd(): the write() syscall allows to add a value to
the internal counter, and so, it must be byte-swapped to
the host order.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Change malloc/strdup/free to g_malloc/g_strdup/g_free in
util/envlist.c.
Remove NULL checks for pointers returned from g_malloc and g_strdup
as they exit in case of failure. Also, update calls to envlist_create
to reflect this.
Free array and array contents returned by envlist_to_environ using
g_free in bsd-user/main.c and linux-user/main.c.
Update comments to reflect change in semantics.
Signed-off-by: Saurav Sachidanand <sauravsachidanand@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shadow registers are part of the openrisc spec along with sr[cid], as
part of the fast context switching feature. When exceptions occur,
instead of having to save registers to the stack if enabled the CID will
increment and a new set of registers will be available.
This patch only implements shadow registers which can be used as extra
scratch registers via the mfspr and mtspr if required. This is
implemented in a way where it would be easy to add on the fast context
switching, currently cid is hardcoded to 0.
This is need for openrisc linux smp kernels to boot correctly.
Signed-off-by: Stafford Horne <shorne@gmail.com>
* raspi2: implement RNG module
* raspi2: implement new SD card controller (but don't wire it up)
* sdhci: bugfixes for block transfers
* virt: fix cpu object reference leak
* Add missing fp_access_check() to aarch64 crypto instructions
* cputlb: Don't assume do_unassigned_access() never returns
* virt: Add a user option to disallow ITS instantiation
* i.MX timers: fix reset handling
* ARMv7M NVIC: rewrite to fix broken priority handling and masking
* exynos: Fix proper mapping of CPUs by providing real cluster ID
* exynos: Fix Linux kernel division by zero for PLLs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3qLp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170228' into staging
target-arm queue:
* raspi2: implement RNG module
* raspi2: implement new SD card controller (but don't wire it up)
* sdhci: bugfixes for block transfers
* virt: fix cpu object reference leak
* Add missing fp_access_check() to aarch64 crypto instructions
* cputlb: Don't assume do_unassigned_access() never returns
* virt: Add a user option to disallow ITS instantiation
* i.MX timers: fix reset handling
* ARMv7M NVIC: rewrite to fix broken priority handling and masking
* exynos: Fix proper mapping of CPUs by providing real cluster ID
* exynos: Fix Linux kernel division by zero for PLLs
# gpg: Signature made Tue 28 Feb 2017 12:40:51 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20170228: (27 commits)
hw/arm/exynos: Fix proper mapping of CPUs by providing real cluster ID
hw/arm/exynos: Fix Linux kernel division by zero for PLLs
bcm2835_sdhost: add bcm2835 sdhost controller
armv7m: Allow SHCSR writes to change pending and active bits
armv7m: Raise correct kind of UsageFault for attempts to execute ARM code
armv7m: Check exception return consistency
armv7m: Extract "exception taken" code into functions
armv7m: VECTCLRACTIVE and VECTRESET are UNPREDICTABLE
armv7m: Simpler and faster exception start
armv7m: Remove unused armv7m_nvic_acknowledge_irq() return value
armv7m: Escalate exceptions to HardFault if necessary
arm: gic: Remove references to NVIC
armv7m: Fix condition check for taking exceptions
armv7m: Rewrite NVIC to not use any GIC code
armv7m: Implement reading and writing of PRIGROUP
armv7m: Rename nvic_state to NVICState
ARM i.MX timers: fix reset handling
hw/arm/virt: Add a user option to disallow ITS instantiation
cputlb: Don't assume do_unassigned_access() never returns
Add missing fp_access_check() to aarch64 crypto instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
M profile doesn't implement ARM, and the architecturally required
behaviour for attempts to execute with the Thumb bit clear is to
generate a UsageFault with the CFSR INVSTATE bit set. We were
incorrectly implementing this as generating an UNDEFINSTR UsageFault;
fix this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The current implementation of the mincore(2) syscall sets errno to
EFAULT when the region identified by the first two parameters is
invalid.
This goes against the man page specification, where mincore(2) should
only fail with EFAULT when the third parameter is an invalid address;
and fail with ENOMEM when the checked region does not point to mapped
memory.
Signed-off-by: Franklin "Snaipe" Mathieu <snaipe@diacritic.io>
Cc: Riku Voipio <riku.voipio@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170217085800.28873-2-snaipe@diacritic.io>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
do_rt_sigreturn uses an uninitialised local variable instead of fetching
the old signal mask directly from the signal frame when restoring the mask,
so the signal mask is undefined after do_rt_sigreturn. As the signal
frame data is in target-endian order, target_to_host_sigset instead of
target_to_host_sigset_internal is required.
do_sigreturn is correct in using target_to_host_sigset_internal, because
get_user already did the endianness conversion.
Signed-off-by: Michael Karcher <karcher@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170225110517.2832-3-laurent@vivier.eu>
Use cpu_m68k_get_ccr()/cpu_m68k_set_ccr() to setup and restore correctly
the value of SR in the ucontext structure
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170225110517.2832-2-laurent@vivier.eu>
Note that x86_64 has only _rt signal handlers. This implementation
attempts to share code with the x86_32 implementation.
CC: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Allan Wirth <awirth@akamai.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170226165345.8757-1-bobby.prani@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commit 5ea2fc8 ("linux-user: Sanity check clone flags"),
trying to run fork() fails with old distro on some architectures.
This is the case with HP-PA and Debian 5 (Lenny).
It fails on:
if ((flags & CSIGNAL) != TARGET_SIGCHLD) {
return -TARGET_EINVAL;
}
because flags is 17, whereas on HP-PA, SIGCHLD is 18.
17 is the SIGCHLD value of my host (x86_64).
It appears that for TARGET_NR_fork and TARGET_NR_vfork, QEMU calls
do_fork() with SIGCHLD instead of TARGET_SIGCHLD.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170216173707.16209-1-laurent@vivier.eu>
Programs run under qemu-ppc64 on an x86_64 host currently segfault
if they use pthread_create() due to the adjustment made to the NIP in
commit bd6fefe71c.
This patch changes cpu_loop() to set the NIP back to the
pre-incremented value before calling do_syscall(), which causes the
correct address to be used for the new thread and corrects the fault.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Coverity doesn't like the code in load_symbols() which assumes
it can use 'int' for a variable that might hold an offset into
the guest ELF file, because in a 64-bit guest that could
overflow. Guest binaries with 2GB sections aren't very likely
and this isn't a security issue because we fully trust the
guest linux-user binary anyway, but we might as well use the
right types, which will placate Coverity. Use uint64_t to
hold section sizes, and bail out if the symbol table is too
large rather than just overflowing an int.
(Coverity issue CID1005776)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1486249533-5260-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A segfault is noticed when an emulated program uses any of ucontext
regs fields. Risu detected this issue in the following operation when
handling a signal:
ucontext_t *uc = (ucontext_t*)uc;
uc->uc_mcontext.regs->nip += 4;
but this works fine:
uc->uc_mcontext.gp_regs[PT_NIP] += 4;
This patch set regs to a valid location as well as other sigcontext
fields.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1485900317-3256-1-git-send-email-joserz@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
tests/tcg/mmap test fails with values other than default target page
size. When creating a map beyond EOF, extra anonymous pages are added up
to the target page boundary. Currently, this operation is performed only
when qemu_real_host_page_size < TARGET_PAGE_SIZE, but it should be
performed if the configured page size (qemu -p) is larger than
qemu_real_host_page_size too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[pranith: dropped checkpatch changes]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170119151533.29328-2-bobby.prani@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add QEMU_IFLA_GSO_MAX_SEGS and QEMU_IFLA_GSO_MAX_SIZE
in host_to_target_data_link_rtattr().
These two messages are sent by the host kernel when
we use "sudo".
Found with qemu-m68k and Debian etch-m68k (sudo 1.6.8p12-4) and
host kernel 4.7.6-200.fc24.x86_64
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1477530049-15676-1-git-send-email-laurent@vivier.eu>
If fourth argument is NULL it should be passed without
using lock_user function which would, in that case, return
EFAULT, and system call supports passing NULL as fourth argument.
Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Calculation of 64-bit offset was not correct for all cases.
Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This commit adds necessary conversion of argument passed to inotify_init1.
inotify_init1 flags can be IN_NONBLOCK and IN_CLOEXEC which rely on O_NONBLOCK
and O_CLOEXEC and those can have different values on different platforms.
Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The LT instruction was added in the extended immediate facility
introduced with the z9-109 processor.
Cc: Riku Voipio <riku.voipio@iki.fi>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: c9bc3437a9
Suggested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This avoids having to keep merging and extracting the flag from SR.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Threads work much better when you set the TLS register.
This was fixed in the upstream kernel for Linux 4.9.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We need to handle EXCP_DEBUG and EXCP_INTERRUPT.
We need to send signals to the guest using queue_signal.
Signed-off-by: Richard Henderson <rth@twiddle.net>
the correct UTS machine name (as expected by systemd) is "parisc",
not "hppa".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170126080449.28255-4-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
apt-get was hanging on linux-user hppa.
strace has shown the netlink data stream was not correctly byte swapped.
It appears the fd translator function is unregistered just after it
has been registered, so the translator function is not called.
This patch removes the fd_trans_unregister() after the do_socket()
in the TARGET_NR_socket case.
This fd_trans_unregister() was added by commit
e36800c linux-user: add signalfd/signalfd4 syscalls
when do_socket() was not registering any fd translator.
And as now it is, we must remove this fd_trans_unregister() to keep them.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Message-Id: <20170126080449.28255-3-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
"any" does not exist, therefore resulting in a misleading error message.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170130145025.26475-1-david@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Cc: qemu-stable@nongnu.org
For v7M attempts to access a nonexistent coprocessor are reported
differently from plain undefined instructions (as UsageFaults of type
NOCP rather than type UNDEFINSTR). Split them out into a new
EXCP_NOCP so we can report the FSR value correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-8-git-send-email-peter.maydell@linaro.org
Add missing bits for qemu-user required for emulating Altera Nios2
userspace binaries.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-4-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The cpu.h structure that these manipulate hasn't been defined
yet, but we haven't enabled compilation yet either.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Mirror syscall_defs.h for the element type of struct timeval
and struct timespec, even though that's not 100% accurate for
each guest.
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Changed the MK_ARRAY types as per above; added ioctl.h entries.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Some architectures (ppc, alpha, sparc, parisc, sh and xtensa) define the
BSD TIOCSTART and TIOCSTOP ioctls in their kernel headers to provide
compatibility to other operating systems.
Those ioctls are not implemented in Linux, nevertheless, bash will use
this ioctl if it's available on those architectures.
To avoid false warnings, add code to simply ignore those ioctls.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20161206152403.GA6651@ls3530>
Signed-off-by: Richard Henderson <rth@twiddle.net>
HPPA is a (the) stack-grows-up target, and supporting that requires
rearranging how we compute addresses while laying out the initial
program stack. In addition, hppa32 requires 64-byte stack alignment
so parameterize that as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Update helper to set the throwing location in case of div-by-0.
Cleanup divX.w and add quad word variants of divX.l.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twidle.net>
[laurent: modified to clear Z on overflow, as found with risu]
Future patches will enforce the holding of mmap_lock() when we are
manipulating internal memory structures. Technically it doesn't matter
in the case of elfload as we haven't started executing yet. However it
is easier to grab the lock when required than special case the
translate-all API.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-8-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds asserts to check the locking on the various translation
engines structures. There are two sets of structures that are protected
by locks.
The first the l1map and PageDesc structures used to track which
translation blocks are associated with which physical addresses. In
user-mode this is covered by the mmap_lock.
The second case are TB context related structures which are protected by
tb_lock which is also user-mode only.
Currently the asserts do nothing in SoftMMU mode but this will change
for MTTCG.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-4-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulating LL/SC with cmpxchg is not correct, since it can
suffer from the ABA problem. However, portable parallel
code is written assuming only cmpxchg which means that in
practice this is a viable alternative.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-30-git-send-email-cota@braap.org>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twidle.net>
Message-Id: <1467054136-10430-29-git-send-email-cota@braap.org>
The variable parallel_cpus controls the generation of thread aware
atomic code. We only need to set it once we clone our first thread.
At this point any existing translations need to be thrown away.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When we cannot emulate an atomic operation within a parallel
context, this exception allows us to stop the world and try
again in a serial context.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Version 2.0 of the semihosting specification introduces new trap
instructions for AArch32: HLT 0xF000 for A32 and HLT 0x3C for T32.
Implement these (in the same way we implement the existing HLT
semihosting trap for A64).
The old traps via SVC and BKPT are unaffected.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1476792973-18508-1-git-send-email-peter.maydell@linaro.org
The output string QEMU with "--version" is very long, it does
not fit into a normal line of a terminal window anymore. By
putting the copyright information on a separate line instead,
the output looks much nicer.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1475661284-30153-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This system call performs the same task as the writev() system call,
with the exception of having the fourth argument, offset, which
specifes the file offset at which the input operation is to be performed.
Because of this, the pwritev() implementation is based on the writev()
implementation in linux-user mode.
But, since pwritev() is implemented in the kernel as a 5-argument syscall,
5 arguments are needed to be handled as input and passed to the host
syscall.
The pos_l and pos_h argument of the safe_pwritev() are of type unsigned
long, which can be of different sizes on different platforms. The input
arguments are converted to the appropriate host size when passed to
safe_pwritev().
Signed-off-by: Dejan Jovicevic <dejan.jovicevic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This system call performs the same task as the readv() system call,
with the exception of having the fourth argument, offset, which
specifes the file offset at which the input operation is to be performed.
Because of this, the preadv() implementation is based on the readv()
implementation in linux-user mode.
But, since preadv() is implemented in the kernel as a 5-argument syscall,
5 arguments are needed to be handled as input and passed to the host
syscall.
The pos_l and pos_h argument of the safe_preadv() are of type unsigned
long, which can be of different sizes on different platforms. The input
arguments are converted to the appropriate host size when passed to
safe_preadv().
Signed-off-by: Dejan Jovicevic <dejan.jovicevic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
By looking at the file arch/mips/kernel/scall32-o32.S in Linux
kernel, it can be deduced that, for Mips32 platform, syscall
corresponding to number _NR_fadvise64 as defined in kernel file
arch/mips/include/uapi/asm/unistd.h translates to kernel function
sys_fadvise64_64, and that argument layout for this system call is
as follows:
0 32 0 32
+----------------+----------------+
(arg1) | fd | __pad | (arg2)
+----------------+----------------+
(arg3) | buffer | (arg4)
+----------------+----------------+
(arg5) | len | (arg6)
+----------------+----------------+
(arg7) | advise | not used | (arg8)
+----------------+----------------+
The same argument layout can be deduced from glibc code, and
relevant commit messages in linux kernel and glibc.
The fix is to change TARGET_NR_fadvise64 to TARGET_NR_fadvise64_64
in Mips32 syscall numbers table. Array mips_syscall_args[] in
linux-user/main.c also already have "fadvise64_64" (and not
"fadvise64") in corresponding place for the syscall number in
question, so no change for linux-user/main.c.
This patch also fixes the failure LTP test posix_fadvise03, if
executed on Qemu-emulated Mips32 platform (user mode).
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Miroslav Tisma <miroslav.tisma@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
linux-user/mips64/termbits.h and linux-user/mips/termbits.h
originate from the same files in Linux kernel. There is no plan
to split original headers in Linux kernel into Mips32 and Mips64
versions any time soon. Therefore, it is better not to have
separate Mips32 and Mips64 variants in Qemu.
This patch makes these two files effectively the same, allowing the
mainenance by changing only a single file. (This is already done in
the same fashion for some other headers in same directories.)
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Array mips_syscall_args[] determines number of arguments for each
syscall on Mips32. It wasn't updated with newer syscalls. Also,
preadv and pwritev have 5 arguments, not 6.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements Qemu user mode syncfs() syscall support. Syscall
syncfs() syncs the filesystem containing file determined by the open
file descriptor passed as the argument to syncfs().
The implementation consists of a straightforward invocation of host's
syncfs(). Configure and strace support is included as well.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements Qemu user mode clock_adjtime() syscall support.
The implementation is based on invocation of host's clock_adjtime().
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The sigevent structure includes a union with some fields which
are pointers. For the QEMU target_sigevent structure we must
represent these as abi_ulongs, not host function pointers.
This error was causing the compiler to believe it should 8-align
the _sigev_un union on a 64-bit host, which meant that the
code in target_to_host_sigevent() was looking at the wrong
offset to find the _tid field, and timer_create() would
spuriously fail with EINVAL.
This fixes the final loose end noted in LP:1042388.
While we're editing the structure, switch the 'int32_t' fields
to 'abi_int'; this will only matter for guests with non-standard
integer alignment like m68k.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This commit essentially reverts commit
3af72a4d98, which has replaced
five-argument calls to mremap() by direct mremap syscalls for
compatibility with glibc older than version 2.4.
The direct syscall was buggy for 64bit targets on 32bit hosts
because of the default integer type promotions. Since glibc-2.4
is now a decade old, we can remove this workaround.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The epoll event array which epoll_wait() allocates has a size
determined by the guest which could potentially be quite large.
Use g_try_new() rather than alloca() so that we can fail more
cleanly if the guest hands us an oversize value. (ENOMEM is
not a documented return value for epoll_wait() but in practice
some kernel configurations can return it -- see for instance
sys_oabi_epoll_wait() on ARM.)
This rearrangement includes fixing a bug where we were
incorrectly passing a negative length to unlock_user() in
the error-exit codepath.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Used by fedora21 on ppc64 in the network initialization
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In commit 40df8c0c0722 support was added for target-specific
handling of SHMLBA. Unfortunately the sparc64-specific part
of the change got lost somewhere between the patch being
posted to the list and going into master:
http://patchwork.ozlabs.org/patch/646980/http://patchwork.ozlabs.org/patch/673339/
Add the accidentally-dropped code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There is a duplicate item in strace.list. It is benign, but it
shouldn't be there, since it may lead to confusion and even bugs
in the future. It is the only duplicate in strace.list. This
patch removes it.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There are currently several problems related to syslog() support.
For example, if the second argument "bufp" of target syslog() syscall
is NULL, the current implementation always returns error code EFAULT.
However, NULL is a perfectly valid value for the second argument for
many use cases of this syscall. This is, for example, visible from
this excerpt of man page for syslog(2):
> EINVAL Bad arguments (e.g., bad type; or for type 2, 3, or 4, buf is
> NULL, or len is less than zero; or for type 8, the level is
> outside the range 1 to 8).
Moreover, the argument "bufp" is ignored for all cases of values of the
first argument, except 2, 3 and 4. This means that for such cases
(the first argument is not 2, 3 or 4), there is no need to pass "buf"
between host and target, and it can be set to NULL while calling host's
syslog(), without loss of emulation accuracy.
Note also that if "bufp" is NULL and the first argument is 2, 3 or 4, the
correct returned error code is EINVAL, not EFAULT.
All these details are reflected in this patch.
"#ifdef TARGET_NR_syslog" is also proprerly inserted when needed.
Support for Qemu's "-strace" switch for syslog() syscall is included too.
LTP tests syslog11 and syslog12 pass with this patch (while fail without
it), on any platform.
Changes to original patch by Riku Voipio:
fixed error paths in TARGET_SYSLOG_ACTION_READ_ALL to match
http://lxr.free-electrons.com/source/kernel/printk/printk.c?v=4.7#L1335
Should fix also the build error in:
https://lists.gnu.org/archive/html/qemu-devel/2016-10/msg03721.html
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since not all Linux host platforms support socketcall() (most notably
Intel), do_socketcall() function in Qemu's syscalls.c is implemented to
mirror the corespondant implementation of socketcall() in Linux kernel,
and to utilise individual socket operations that are supported on all
Linux platforms. (see kernel source file net/socket.c, definition of
socketcall).
However, error codes produced by Qemu implementation are wrong for the
cases of invalid values of the first argument. Also, naming of constants
is not consistent with kernel one, and not consistant with Qemu convention
of prefixing such constants with "TARGET_". This patch in that light
brings do_socketcall() closer to its kernel counterpart, and in that way
fixes the errors and yields more consisrtent Qemu code.
There were also three missing cases (among 20) for strace support for
socketcall(). The array that contains pointers for appropriate printing
functions is updated with 3 elements, however pointers to functions are
left NULL, and its implementation is left for future.
Also, this patch fixes failure of LTP test socketcall02, if executed on some
Qemu emulated sywstems (uer mode).
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If syscalls msgrcv() and msgsnd() fail, they return E2BIG, EACCES,
EAGAIN, EFAULT, EIDRM, EINTR, EINVAL, ENOMEM, or ENOMSG.
By examining negative scenarios of these syscalls for Mips, it was
established that ENOMSG does not have the same value accross all
platforms, but it is nevertheless not included for conversion in
the correspondant conversion table defined in linux-user/syscall.c.
This is certainly a bug, since it leads to the incorrect emulation
of msgrcv() and msgsnd() for scenarios involving ENOMSG.
This patch fixes this by extending the conversion table to include
ENOMSG.
Also, LTP test msgrcv04 will be fixed for some platforms.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Conversion of file creation flags (O_CREAT, ...) from target to host
was missing.
Also, this patch implements better error handling.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements Qemu user mode adjtimex() syscall support.
Syscall adjtimex() reads and optionally sets parameters for a clock
adjustment algorithm used in network synchonization or similar scenarios.
Its declaration is:
int adjtimex(struct timex *buf);
The correspondent source code in the Linux kernel is at kernel/time.c,
line 206.
The Qemu implementation is based on invocation of host's adjtimex(), and
its key part is in the "TARGET_NR_adjtimex" case segment of the the main
switch statement of the function do_syscall(), in linux-user/syscalls.c. All
necessary conversions of the data structures from target to host and from
host to target are covered. Two new functions, target_to_host_timex() and
host_to_target_timex(), are provided for the purpose of such conversions.
For that purpose, the support for related structure "timex" had tp be added
to the file linux-user/syscall_defs.h, based on its definition in Linux
kernel. Also, the relevant support for "-strace" Qemu option is included
in files linux-user/strace.c and linux-user/strace.list.
This patch also fixes failures of LTP tests adjtimex01 and adjtimex02, if
executed in Qemu user mode.
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.
The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.
[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:
linux-user/bsd-user: initialize trace events subsystem
The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJX+LTGAAoJEHAbT2saaT5ZIBwH+wfho+xxruEjro6qPvSAtdKk
BBsOWBfBoqWfbAbOxxCO8ina2nA7p5XbyzSXUr94nZhvZMB9BkgL6la03gdS0Yr2
jHf0J9mM8fIbMQFsEKGOPcdpvU7VEXeFwridZYzypiRvbNSdWK3SKVBKgz2ADNhb
l4Tos81IZeH/mw8HcU3XgSGSTV4JuKP4XsnmwlFMa8/sWM/X3vVgx5IG26KURZQm
pW720jcX0meSfji5YvhspfbBbp1g2EorTZb6iLcZf+OUIB6XkViMisVasnyOo2HJ
cehPlhAHixwq1kXGItc1fs11VloZ6hvEZ7kZ615jAdsD2sGJObtGDxgyJW3+gPo=
=HPHj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging
trivial patches for 2016-10-08
# gpg: Signature made Sat 08 Oct 2016 09:56:38 BST
# gpg: using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* remotes/mjt/tags/trivial-patches-fetch: (26 commits)
net/filter-mirror: Fix mirror initial check typo
virtio: rename the bar index field name in VirtIOPCIProxy
linux-user: include <poll.h> instead of <sys/poll.h>
char: fix missing return in error path for chardev TLS init
CODING_STYLE: Fix a typo ("have" vs. "has")
bitmap: refine and move BITMAP_{FIRST/LAST}_WORD_MASK
build-sys: fix find-in-path
m68k: change default system clock for m5208evb
exec: remove unused compacted argument
usb: ehci: fix memory leak in ehci_process_itd
qapi: make the json schema files more regular.
maint: Add module_block.h to .gitignore
MAINTAINERS: Some updates related to the SH4 machines
MAINTAINERS: Add some more MIPS related files
MAINTAINERS: Add usermode related config files
MAINTAINERS: Add some more pattern to recognize all win32 related files
MAINTAINERS: Add some more rocker related files
MAINTAINERS: Add header files to CRIS section
MAINTAINERS: Add some more files to the virtio section
MAINTAINERS: Add some SPARC machine related files
...
# Conflicts:
# MAINTAINERS
This removes the last usage of <sys/poll.h> in the code base.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is a potential race if several threads exit at once. To serialise
the exits extend the lock above the initial checking of the CPU list.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-11-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Every time a vCPU is hot-plugged, it will "inherit" its tracing state
from the global state array. That is, if *any* existing vCPU has an
event enabled, new vCPUs will have too.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147428970768.15111.7664565956870423529.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will serve as the base for async_safe_run_on_cpu. Because
start_exclusive uses CPU_FOREACH, merge exclusive_lock with
qemu_cpu_list_lock: together with a call to exclusive_idle (via
cpu_exec_start/end) in cpu_list_add, this protects exclusive work
against concurrent CPU addition and removal.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make CPU work core functions common between system and user-mode
emulation. User-mode does not use run_on_cpu, so do not implement it.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-10-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a mutex for the CPU list to system emulation, as it will be used to
manage safe work. Abstract manipulation of the CPU list in new functions
cpu_list_add and cpu_list_remove.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert pthread_mutex_t and pthread_cond_t to QemuMutex and QemuCond.
This will allow to make some locks and conditional variables common
between user and system mode emulation.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-7-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without this patch, a number of Mips syscalls will be logged in the following
way (in this example, this is an invocation of accept4()):
86906 Unknown syscall 4334
This patch provides standard Qemu's strace output for such cases, like this:
95861 accept4(3,1996486000,1996486016,128,0,0) = 5
Such output may be further improved by providing strace-related functions
that handle only particular syscalls, but this is beyond the scope of
this patch.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
EDQUOT is defined for Mips platform in Linux kernel in such a way
that it has different value than on most other platforms. However,
correspondent TARGET_EDQUOT for Mips is missing in Qemu code. Moreover,
TARGET_EDQUOT is missing from the table for conversion of error codes
from host to target. This patch fixes these problems.
Without this patch, syscalls add_key(), keyctl(), link(), mkdir(), mknod(),
open(), rename(), request_key(), setxattr(), symlink(), and write() will not
be able to return the right error code in some scenarios on Mips platform.
(Some of these syscalls are not yet supported in Qemu, but once they are
supported, they will need correct EDQUOT handling.)
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The function that is changed in this patch is supposed to indicate that
there was certain argument rearrangement related to 64-bit arguments on
32-bit platforms. The background on such rearrangements can be found,
for example, in the man page for syscall(2).
However, for 64-bit Mips architectures there is no such rearrangement,
and this patch reflects it.
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
This patch corrects target_semid64_ds structure definition for Mips.
See, for example definition of semid64_ds for Mips in Linux kernel:
arch/mips/include/uapi/asm/sembuf.h#L13.
This patch will also fix certain semaphore-related LTP tests for Mips,
if they are executed in Qemu user mode for any Mips platform.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Structure flock is defined for Mips in a way different from any
other platform. For reference, see Linux kernel source code files:
arch/mips/include/uapi/asm/fcntl.h, line 63 (for Mips)
include/uapi/asm-generic/fcntl.h, line 195 (for all other platforms)
This patch fix this problem, by amending structure target_flock,
for Mips only.
Besides, this patch fixes LTP tests fcntl11, fcntl17, fcntl19, fcntl20,
and fcntl21, which are currently failing, if executed in Qemu user mode
for Mips platforms.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
For some reason, Qemu's TARGET_F_GETOWN constant for Mips does not
match the correct value of correspondent F_GETOWN. This patch fixes
this problem.
For reference, see Mips' F_GETOWN definition in Linux kernel at
arch/mips/include/uapi/asm/fcntl.h#L44.
This patch also fixes some fcntl()-related LTP tests for Qemu
user mode for Mips.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
This patch fixes wrong definition of TARGET_SIOCATMARK for mips,
alpha, and sh4.
The current definition is:
#define SIOCATMARK 0x8905
while the correct definition is:
#define SIOCATMARK TARGET_IOR('s', 7, int)
See Linux kernel source file arch/mips/include/uapi/asm/sockios.h#L19
for reference.
This patch also a fixes LTP test failure for test sockioctl01, for
mips, alpha, and sh4.
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Only the POWER[789] CPUs should have the ARCH_206 bit set. This is what the
linux kernel does. I guess this was also the intention of commit 0e019746.
We have to make sure all *206 bits are set.
Before this patch, the flags check in the GET_FEATURES2 macro returned true
if _any_ bit was set. This worked well as long as there was only one bit
set in the 'flag' parameter. But as explained before, we have to make sure
all bits in the 'flag' parameter are set.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There were a number of bugs in the implementation:
- The structure alignment was wrong for 64-bit.
- Also 64-bit only does RT signals.
- On 64-bit, we need to put a pointer to the (aligned) vector registers
in the frame and use it for restoring
- We had endian bugs when saving/restoring vector registers
- My recent fixes for exception NIP broke sigreturn in user mode
causing us to resume one instruction too far.
- Add VSR second halves
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
TARGET_NR_select can have three different implementations:
1- to always return -ENOSYS
microblaze, ppc, ppc64
-> TARGET_WANT_NI_OLD_SELECT
2- to take parameters from a structure pointed by arg1
(kernel sys_old_select)
i386, arm, m68k
-> TARGET_WANT_OLD_SYS_SELECT
3- to take parameters from arg[1-5]
(kernel sys_select)
x86_64, alpha, s390x,
cris, sparc, sparc64
Some (new) architectures don't define NR_select,
4- but only NR__newselect with sys_select:
mips, mips64, sh
5- don't define NR__newselect, and use pselect6 syscall:
aarch64, openrisc, tilegx, unicore32
Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Reported-by: Allan Wirth <awirth@akamai.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
struct target_ucontext_v2 is not at the begining of the signal frame,
therefore do_sigaltstack was being passed bogus arguments.
As the offset depends on the type of signal frame fixed by passing in the
beginning of the context from do_sigreturn_v2 and do_rt_sigreturn_v2.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We currently make no checks on the flags passed to the clone syscall,
which means we will not fail clone attempts which ask for features
that we can't implement. Add sanity checking of the flags to clone
(which we were already doing in the "this is a fork" path, but not
for the "this is a new thread" path), tidy up the checking in
the fork path to match it, and check that the fork case isn't trying
to specify a custom termination signal.
This is helpful in causing some LTP test cases to fail cleanly
rather than behaving bizarrely when we let the clone succeed
but didn't provide the semantics requested by the flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 'nptl_flags' variable in do_fork() is set to a copy of
'flags', and then the CLONE_NPTL_FLAGS are cleared out of 'flags'.
However the only effect of this is that the later check on
"if (flags & CLONE_PARENT_SETTID)" is never true. Since we
will already have done the setting of parent_tidptr in clone_func()
in the child thread, we don't need to do it again.
Delete the dead if() and the clearing of CLONE_NPTL_FLAGS from
'flags', and then use 'flags' where we were previously using
'nptl_flags', so we can delete the unnecessary variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Now that we have a force_sig() with the semantics we need,
we can implement force_sigsegv() to call it rather than
open-coding the call to queue_signal().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If the sigreturn syscall fails to read memory then this causes a
SIGSEGV, but this is not necessarily a fatal signal -- the guest
process can catch it.
We don't implement this correctly because the behaviour of QEMU's
force_sig() function has drifted away from the kernel function of the
same name -- ours now does "always do a guest core dump and abort
execution", whereas the kernel version simply forces the guest to
take a signal, which may or may not eventually cause a core dump.
Rename our force_sig() to dump_core_and_abort(), and provide a
force_sig() which acts more like the kernel version as the sigreturn
implementations expect it to. Since force_sig() now returns, we must
update all the callsites to return -TARGET_QEMU_ESIGRETURN so that
the main loop doesn't change the guest registers before the signal
handler is invoked.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 32-bit ARM signal frame setup code was just bailing out
on error returns from lock_user_struct calls, without
generating the SIGSEGV that should happen here. Wire up
error return codes to call force_sigsegv().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
A failed write to memory trying to set up the signal frame
should trigger a SIGSEGV, but this need not be fatal: the
guest has a chance to catch it. Implement this via a force_sigsegv()
function with the same behaviour as the kernel function of that
name: make sure that we don't try to re-take a failed SIGSEGV,
and force a synchronous signal.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Instead of assuming in queue_signal() that all callers are passing
a siginfo structure which uses the _sifields._sigfault part of the
union (and thus a si_type of QEMU_SI_FAULT), make callers pass
the si_type they require in as an argument.
[RV adjusted to apply]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In process_pending_signals() we restart the scan of possible
pending signals after calling handle_pending_signal() in
case some other signal has been generated. This rescan
should also include a check for a new synchronous signal
since those are in fact the only kind of new signal that
the signal frame setup process might produce.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
64 bit user mode doesn't work for the e5500 core because the MSR_CM bit is
not set which enables the 64 bit mode for this MMU model. Memory addresses
are truncated to 32 bit, which results in "Invalid data memory access"
error messages. Fix it by setting the MSR_CM bit for this MMU model.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The shmat() handling needs to do target-specific handling
of the attach address for shmat():
* if the SHM_RND flag is passed, the address is rounded
down to a SHMLBA boundary
* if SHM_RND is not passed, then the call is failed EINVAL
if the address is not a multiple of SHMLBA
Since SHMLBA is target-specific, we need to do this
checking and rounding in QEMU and can't leave it up to the
host syscall.
Allow targets to define TARGET_FORCE_SHMLBA and provide
a target_shmlba() function if appropriate, and update
do_shmat() to honour them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Switch to using the glib malloc functions in load_symbols();
this deals with a Coverity complaint about possible
integer overflow calculating the allocation size with
'nsyms * sizeof(*syms)'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
One of the calls to dump_write() in elf_core_dump() was missing
a check for failure (spotted by Coverity). Add the check to
bring it into line with the other calls from this function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The flatload.c target_pread() function is supposed to return
0 on success or negative host errnos; however it wasn't
checking lock_user() for failure or returning the errno from
the pread() call. Fix these problems (the first of which is
noted by Coverity).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
do_ioctl_dm() should return target errno values, not host ones;
correct an accidental use of a host errno in an error path.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
lock_user() can return NULL, which typically means the syscall
should fail with EFAULT. Add checks in various places where
Coverity spotted that we were missing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
A target_mmap() call in load_elf_binary() was missing the MAP_ANONYMOUS
flag. (Spotted by Coverity, because target_mmap() will try to use
-1 as the filedescriptor in this case.)
This has never been noticed because the code in question is for
handling ancient SVr4 iBCS2 binaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Native strace reports when the process being traced takes a signal:
--- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
Report something similar when QEMU is doing its internal strace of
the guest process and is about to deliver it a signal.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Do an initial range check on the ppoll syscall's nfds argument,
to avoid possible overflow in the calculation of the lock_user()
size argument. The host kernel will later apply the rather lower
limit based on RLIMIT_NOFILE as appropriate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The kernel checks that the maxevents parameter to epoll_wait
is non-negative and not larger than EP_MAX_EVENTS. Add this
check to our implementation, so that:
* we fail these cases EINVAL rather than EFAULT
* we don't pass negative or overflowing values to the
lock_user() size calculation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The linux utimensat syscall differs in semantics from the
libc function because the syscall combines the features
of utimensat() and futimens(). Rather than trying to
split these apart in order to call the two libc functions
which then call the same underlying syscall, just always
directly make the host syscall. This fixes bugs in some
of the corner cases which should return errors from the
syscall but which we were incorrectly directing to futimens().
This doesn't reduce the set of hosts that our syscall
implementation will work on, because if the direct syscall
fails ENOSYS then the libc functions would also fail ENOSYS.
(The system call has been in the kernel since 2.6.22 anyway.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implement the FS_IOC_GETFLAGS and FS_IOC_SETFLAGS ioctls, as used
by chattr.
Note that the type information encoded in these ioctl numbers
is at odds with the actual type the kernel accesses, as discussed
in http://thread.gmane.org/gmane.linux.file-systems/80164.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The POSIX standard mandates that for a connected socket recvfrom()
must ignore the msg_name and msg_namelen fields. This is awkward
for QEMU because we will attempt to copy them from guest address
space. Handle this by not immediately returning a TARGET_EFAULT
if the copy failed, but instead passing a known-bad address
to the host kernel, which can then return EFAULT or ignore the
value appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The sendmsg and recvmsg syscalls use a different errno to indicate
an overlarge iovec length from readv and writev. Handle this
special case in do_sendrcvmsg_locked() to avoid getting the
default errno returned by lock_iovec().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In the kernel the length of an iovec is generally handled as
an unsigned long, not an integer; fix the parameter to
lock_iovec() accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Riku Voipio <riku.voipio@iki.fi>
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The HPPA backend has been removed by the following commit:
802b508123
tcg-hppa: Remove tcg backend
But some small pieces of the HPPA backend still survived until
today. Since we also do not have support for a HPPA target in
QEMU, we can nowadays safely remove the remaining HPPA parts
(like the disassembler code, or the detection of HPPA in the
configure script).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 900cfbc just removed two unchecked uses of strdup
in fill_psinfo and missed the rest in core_dump_filename.
This patch fixes it.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Message-Id: <1459997185-15669-2-git-send-email-weijg.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Display an exception number, generally defined as an hexadecimal
number (for instance, EXCP_HLT is 0x10001).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Other archs don't do it, some programs catch signals just fine
and those dumps just clutter the output. Keep the dumps for cases
that aren't supposed to happen such as unknown codes.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The usermode "translate" code generates an error code value that
has the "is_write" bit set, which causes our switch/case to miss
and display "Invalid segfault errno" and a spurrious second state
dump. Fix it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In 9c37146782 I've tried to fix a broken build with older
linux-headers. However, I didn't do it properly. The solution
implemented here is to grab the enums that caused the problem
initially, and rename their values so that they are "QEMU_"
prefixed. In order to guarantee matching values with actual
enums from linux-headers, the enums are seeded with starting
values from the original enums.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The fix I've made there was wrong. I mean, basically what I did
there was equivalent to:
#if 0
some code;
#endif
This reverts commit 9c37146782.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 40d61349e445c1ad5fef795da704bf7ed6e19c86.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The llseek syscall takes two 32-bit arguments, offset_high
and offset_low, which must be combined to form a single
64-bit offset. Unfortunately we were combining them with
(uint64_t)arg2 << 32) | arg3
and arg3 is a signed type; this meant that when promoting
arg3 to a 64-bit type it would be sign-extended. The effect
was that if the offset happened to have bit 31 set then
this bit would get sign-extended into all of bits 63..32.
Explicitly cast arg3 to abi_ulong to avoid the erroneous
sign extension.
Reported-by: Chanho Park <parkch98@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Chanho Park <parkch98@gmail.com>
Message-id: 1470938379-1133-1-git-send-email-peter.maydell@linaro.org
In c5dff280 we tried to make us understand netlink messages more.
So we've added a code that does some translation. However, the
code assumed linux-headers to be at least version 4.4 of it
because most of the symbols there (if not all of them) were added
in just that release. This, however, breaks build on systems with
older versions of the package.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-id: 23806aac6db3baf7e2cdab4c62d6e3468ce6b4dc.1471340849.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the -version command line argument prints a string ending
with "Copyright (c) 2003-2008 Fabrice Bellard". This is now some
eight years out of date; abstract it out of the several places that
print the string and update it to:
Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers
to reflect the work by all the QEMU Project contributors over the
last decade.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1470309276-5012-1-git-send-email-peter.maydell@linaro.org
In do_brk(), we were inadvertently truncating the size
of a requested brk() from the guest by putting it into an
'int' variable. This meant that we would incorrectly report
success back to the guest rather than a failed allocation,
typically resulting in the guest then segfaulting. Use
abi_ulong instead.
This fixes a crash in the '31370.cc' test in the gcc libstdc++ test
suite (the test case starts by trying to allocate a very large
size and reduces the size until the allocation succeeds).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The target_semid_ds structure is not correct for all
architectures: the padding fields should only exist for:
* 32-bit ABIs
* x86
It is also misnamed, since it is following the kernel
semid64_ds structure (QEMU doesn't support the legacy
semid_ds structure at all). Rename the struct, provide
a correct generic definition and allow the oddball x86
architecture to provide its own version.
This fixes broken SYSV semaphores for all our 64-bit
architectures except x86 and ppc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use g_strlcpy() rather than strcpy() to copy the uname string
into the structure we return to the guest for the uname syscall.
This avoids overrunning the buffer if the user passed us an
overlong string via the QEMU command line.
We fix a comment typo while we're in the neighbourhood.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In open_self_cmdline() we look for a 0 in the buffer we read
from /prc/self/cmdline. We were incorrectly passing the length
of our buf[] array to memchr() as the length to search, rather
than the number of bytes we actually read into it, which could
be shorter. This was spotted by Coverity (because it could
result in our trying to pass a negative length argument to
write()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The AArch64 Linux ABI syscall 84 is sync_file_range, not
sync_file_range2 (in the kernel it uses the asm-generic
headers and does not define __ARCH_WANT_SYNC_FILE_RANGE2).
Update our TARGET_NR_* definitions accordingly.
This fixes the sync_file_range syscall which otherwise
gets its arguments in the wrong order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The SIOCATMARK ioctl takes an argument which should be a
pointer to an integer where the kernel will write the result.
We were incorrectly declaring it as TYPE_NULL which would mean
it would always fail (with EFAULT) when it should succeed.
Correct the type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TIOCGPTN and related terminal control ioctls were not converted to the guest ioctl format on x86_64 targets. Convert these ioctls to enable terminal functionality on x86_64 guests.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add some new blk ioctls (these are 0x12,119 through
to 0x12,127). Several of these are used by mke2fs; this silences
the warnings:
mke2fs 1.42.12 (29-Aug-2014)
Unsupported ioctl: cmd=0x127b
Unsupported ioctl: cmd=0x127a
warning: Unable to get device geometry for /dev/loop5
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x1277
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If userspace specifies a short buffer for a target sockaddr,
the kernel will only copy in as much as it has space for
(or none at all if the length is zero) -- see the kernel
move_addr_to_user() function. Mimic this in QEMU's
host_to_target_sockaddr() routine.
In particular, this fixes a segfault running the LTP
recvfrom01 test, where the guest makes a recvfrom()
call with a bad buffer pointer and other parameters which
cause the kernel to set the addrlen to zero; because we
did not skip the attempt to swap the sa_family field we
segfaulted on the bad address.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Commit 655ed67c2a which switched synchronous signals to
benig recorded in ts->sync_signal rather than in a queue
with every other signal had a bug: we failed to clear
the flag indicating that a synchronous signal was pending
when we delivered it. This meant that we would take the signal
again and again every time the guest made a syscall.
(This is a bug introduced in my refactoring of Timothy Baldwin's
original code.)
Fix this by passing in the struct emulated_sigtable* to
handle_pending_signal(), so that we clear the pending flag
in the ts->sync_signal struct when handling a synchronous signal.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The LOOP_GET_STATUS and LOOP_GET_STATUS64 ioctls were incorrectly
defined as IOC_W rather than IOC_R, which meant we weren't
correctly copying the information back from the kernel to the guest.
The loop_info64 structure definition was also missing a member
and using the wrong type for several 32-bit fields.
In particular, this meant that "kpartx -d image.img" didn't work
and "losetup -a" behaved strangely. Correct the ioctl type definitions.
Reported-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The BLKSSZGET ioctl takes an argument which is a pointer to an int.
We were incorrectly declaring it to take a pointer to a long, which
meant that we would incorrectly write to memory which we should not
if the guest is a 64-bit architecture.
In particular, kpartx uses this ioctl to write to an int on the
stack, which tends to result in it crashing immediately.
Reported-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the /dev/loop-control ioctls:
LOOP_CTL_ADD
LOOP_CTL_REMOVE
LOOP_CTL_GET_FREE
[RV: fixed to apply to new header guards]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Many syscalls which take a sigset_t argument also take an argument
giving the size of the sigset_t. The kernel insists that this
matches its idea of the type size and fails EINVAL if it is not.
Implement this logic in QEMU. (This mostly just means some LTP test
cases which check error cases now pass.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Nested types are used by the kernel to send link information and
protocol properties.
We can see following errors with "ip link show":
Unimplemented nested type 26
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
This patch implements nested types 18 (IFLA_LINKINFO) and
26 (IFLA_AF_SPEC).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As we convert sockaddr for AF_PACKET family for sendto() (target to
host) we need also to convert this for getsockname() (host to target).
arping uses getsockname() to get the the interface address and uses
this address with sendto().
Tested with:
/sbin/arping -D -q -c2 -I eno1 192.168.122.88
...
getsockname(3, {sa_family=AF_PACKET, proto=0x806, if2,
pkttype=PACKET_HOST, addr(6)={1, 10c37b6b9a76}, [18]) = 0
...
sendto(3, "..." 28, 0,
{sa_family=AF_PACKET, proto=0x806, if2, pkttype=PACKET_HOST,
addr(6)={1, ffffffffffff}, 20) = 28
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Netlink is byte-swapping data in the guest memory (it's bad).
It's ok when the data come from the host as they are generated by the
host.
But it doesn't work when data come from the guest: the guest can
try to reuse these data whereas they have been byte-swapped.
This is what happens in glibc:
glibc generates a sequence number in nlh.nlmsg_seq and calls
sendto() with this nlh. In sendto(), we byte-swap nlmsg.seq.
Later, after the recvmsg(), glibc compares nlh.nlmsg_seq with
sequence number given in return, and of course it fails (hangs),
because nlh.nlmsg_seq is not valid anymore.
The involved code in glibc is:
sysdeps/unix/sysv/linux/check_pf.c:make_request()
...
req.nlh.nlmsg_seq = time (NULL);
...
if (TEMP_FAILURE_RETRY (__sendto (fd, (void *) &req, sizeof (req), 0,
(struct sockaddr *) &nladdr,
sizeof (nladdr))) < 0)
<here req.nlh.nlmsg_seq has been byte-swapped>
...
do
{
...
ssize_t read_len = TEMP_FAILURE_RETRY (__recvmsg (fd, &msg, 0));
...
struct nlmsghdr *nlmh;
for (nlmh = (struct nlmsghdr *) buf;
NLMSG_OK (nlmh, (size_t) read_len);
nlmh = (struct nlmsghdr *) NLMSG_NEXT (nlmh, read_len))
{
<we compare nlmh->nlmsg_seq with corrupted req.nlh.nlmsg_seq>
if (nladdr.nl_pid != 0 || (pid_t) nlmh->nlmsg_pid != pid
|| nlmh->nlmsg_seq != req.nlh.nlmsg_seq)
continue;
...
else if (nlmh->nlmsg_type == NLMSG_DONE)
/* We found the end, leave the loop. */
done = true;
}
}
while (! done);
As we have a continue on "nlmh->nlmsg_seq != req.nlh.nlmsg_seq",
"done" cannot be set to "true" and we have an infinite loop.
It's why commands like "apt-get update" or "dnf update hangs".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
fd_trans_target_to_host_data() and fd_trans_host_to_target_data() must
return the length of processed data.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860251784.30668.17339867835129075077.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These headers all use QEMU_HOSTDEP_H as header guard symbol. Reuse of
the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_HOSTDEP_H for linux-user/host/$target/hostdep.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_CPU_H as header guard symbol. Reuse of
the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_CPU_H for linux-user/$target/target_cpu.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Some of them use guard symbol TARGET_SYSCALL_H, but we also have
CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and
__UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl.
Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is
okay as long as they cannot be included together. The script can't
tell, so it warns.
The script dislikes the other guard symbols, too. They don't match
their file name (they should, to make guard collisions less likely),
and __UC32_SYSCALL_H__ is a reserved identifier.
Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for
linux-user/$target/target_sycall.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Clang insists that "cmp" is ambiguous with a memory destination,
requiring an explicit size suffix.
There was a true error in the use of .cfi_def_cfa_offset in the
epilogue, but changing to use the proper .cfi_adjust_cfa_offset
runs afoul of a clang bug wrt .cfi_restore_state. Better to
fold the two epilogues so that we don't trigger the bug.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The fields in the TaskState heap_base, heap_limit and stack_base
are all guest addresses (representing the locations of the heap
and stack for the guest binary), so they should be abi_ulong
rather than uint32_t. (This only in practice affects ARM AArch64
since all the other semihosting implementations are 32-bit.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1466783381-29506-2-git-send-email-peter.maydell@linaro.org
Older kernels don't have F_SETPIPE_SZ and F_GETPIPE_SZ (in
particular RHEL6's system headers don't define these). Add
ifdefs so that we can gracefully fall back to not supporting
those guest ioctls rather than failing to build.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1467304429-21470-1-git-send-email-peter.maydell@linaro.org
This function needs to be converted to QOM hook and virtualised for
multi-arch. This rename interferes, as cpu-qom will not have access
to the renaming causing name divergence. This rename doesn't really do
anything anyway so just delete it.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <69bd25a8678b8b31b91cd9760c777bed1aafb44e.1437212383.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaitepeter@gmail.com>
and add safe_syscall support for i386, aarch64, arm, ppc64 and
s390x.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zonM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160628' into staging
Drop building linux-user targets on HPPA or m68k host systems
and add safe_syscall support for i386, aarch64, arm, ppc64 and
s390x.
# gpg: Signature made Tue 28 Jun 2016 19:31:16 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
# Primary key fingerprint: FF82 03C8 C391 98AE 0581 41EF B448 90DE DE3C 9BC0
* remotes/riku/tags/pull-linux-user-20160628: (24 commits)
linux-user: Provide safe_syscall for ppc64
linux-user: Provide safe_syscall for s390x
linux-user: Provide safe_syscall for aarch64
linux-user: Provide safe_syscall for arm
linux-user: Provide safe_syscall for i386
linux-user: fix x86_64 safe_syscall
linux-user: don't swap NLMSG_DATA() fields
linux-user: fd_trans_host_to_target_data() must process only received data
linux-user: add missing return in netlink switch statement
linux-user: update get_thread_area/set_thread_area strace
linux-user: fix clone() strace
linux-user: add socket() strace
linux-user: add socketcall() strace
linux-user: Support F_GETPIPE_SZ and F_SETPIPE_SZ fcntls
linux-user: Fix wrong type used for argument to rt_sigqueueinfo
linux-user: Create a hostdep.h for each host architecture
user-exec: Remove unused code for OSX hosts
user-exec: Delete now-unused hppa and m68k cpu_signal_handler() code
configure: Don't allow user-only targets for unknown CPU architectures
configure: Don't override ARCH=unknown if enabling TCI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds two events to trace syscalls in syscall emulation mode (*-user):
* guest_user_syscall: Emitted before the syscall is emulated; contains
the syscall number and arguments.
* guest_user_syscall_ret: Emitted after the syscall is emulated;
contains the syscall number and return value.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146651712411.12388.10024905980452504938.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
[RV] Updated syscall argument comment to match code
Do what the comment says, test for signal_pending non-zero,
rather than the current code which tests for bit 0 non-zero.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
If the structure pointed by NLMSG_DATA() is bigger
than the size of NLMSG_DATA(), don't swap its fields
to avoid memory corruption.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
if we process the whole buffer, the netlink helpers can try
to swap invalid data.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Support the F_GETPIPE_SZ and F_SETPIPE_SZ fcntl operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The third argument to the rt_sigqueueinfo syscall is a pointer to
a siginfo_t, not a pointer to a sigset_t. Fix the error in the
arguments to lock_user(), which meant that we would not have
detected some faults that we should.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In commit 4d330cee37 a new hostdep.h file was added, with the intent
that host architectures which needed one could provide it, and the
build system would automatically fall back to a generic version if
there was no version for the host architecture. Although this works,
it has a flaw: if a subsequent commit switches an architecture from
"uses generic/hostdep.h" to "uses its own hostdep.h" nothing in the
makefile dependencies notices this and so doing a rebuild without
a manual 'make clean' will fail.
So we drop the idea of having a 'generic' version in favour of
every architecture we support having its own hostdep.h, even if
it doesn't have anything in it. (There are only thirteen of these.)
If the dependency files claim that an object file depends on a
nonexistent file, our dependency system means that make will
rebuild the object file, and regenerate the dependencies in
the process. So moving between trees prior to this commit and
trees after this commit works without requiring a 'make clean'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The kernel and libc have different ideas about what a sigset_t
is -- for the kernel it is only _NSIG / 8 bytes in size (usually
8 bytes), but for libc it is much larger, 128 bytes. In most
situations the difference doesn't matter, because if you pass a
pointer to a libc sigset_t to the kernel it just acts on the first
8 bytes of it, but for the ucontext_t* argument to a signal handler
it trips us up. The kernel allocates this ucontext_t on the stack
according to its idea of the sigset_t type, but the type of the
ucontext_t defined by the libc headers uses the libc type, and
so do the manipulator functions like sigfillset(). This means that
(1) sizeof(uc->uc_sigmask) is much larger than the actual
space used on the stack
(2) sigfillset(&uc->uc_sigmask) will write garbage 0xff bytes
off the end of the structure, which can trash data that
was on the stack before the signal handler was invoked,
and may result in a crash after the handler returns
To avoid this, we use a memset() of the correct size to fill
the signal mask rather than using the libc function.
This fixes a problem where we would crash at least some of the
time on an i386 host when a signal was taken.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for fcntl. This is straightforward now
that we always use 'struct fcntl64' on the host, as we don't need
to select whether to call the host's fcntl64 or fcntl syscall
(a detail that the libc previously hid for us).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the __get_user() and __put_user() to handle reading and writing the
guest structures in do_ioctl(). This has two benefits:
* avoids possible errors due to misaligned guest pointers
* correctly sign extends signed fields (like l_start in struct flock)
which might be different sizes between guest and host
To do this we abstract out into copy_from/to_user functions. We
also standardize on always using host flock64 and the F_GETLK64
etc flock commands, as this means we always have 64 bit offsets
whether the host is 64-bit or 32-bit and we don't need to support
conversion to both host struct flock and struct flock64.
In passing we fix errors in converting l_type from the host to
the target (where we were doing a byteswap of the host value
before trying to do the convert-bitmasks operation rather than
otherwise, and inexplicably shifting left by 1); these were
accidentally left over when the original simple "just shift by 1"
arm<->x86 conversion of commit 43f238d was changed to the more
general scheme of using target_to_host_bitmask() functions in 2ba7f73.
[RV: fixed ifdef guard for eabi functions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements read and write access rules for Mips floating
point control and status register (FCR31). The change can be divided
into following parts:
- Add fields that will keep FCR31's R/W bitmask in procesor
definitions and processor float_status structure.
- Add appropriate value for FCR31's R/W bitmask for each supported
processor.
- Add function for setting snan_bit_is_one, and integrate it in
appropriate places.
- Modify handling of CTC1 (case 31) instruction to use FCR31's R/W
bitmask.
- Modify handling user mode executables for Mips, in relation to the
bit EF_MIPS_NAN2008 from ELF header, that is in turn related to
reading and writing to FCR31.
- Modify gdb behavior in relation to FCR31.
Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
host_to_target_siginfo() is implemented by a combination of
host_to_target_siginfo_noswap() followed by tswap_siginfo().
The first of these two functions assumes that the target_siginfo_t
it is writing to is correctly aligned, but the pointer passed
into host_to_target_siginfo() is directly from the guest and
might be misaligned. Use a local variable to avoid this problem.
(tswap_siginfo() does now correctly handle a misaligned destination.)
We have to add a memset() to host_to_target_siginfo_noswap()
to avoid some false positive "may be used uninitialized" warnings
from gcc about subfields of the _sifields union if it chooses to
inline both tswap_siginfo() and host_to_target_siginfo_noswap()
into host_to_target_siginfo().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <riku.voipio@linaro.org>
Recent server processors use the Hypervisor Emulation Assistance
interrupt for illegal instructions and *some* type of SPR accesses.
Also the code was always generating inval instructions even for priv
violations due to setting the wrong flags
Finally, the checking for PR/HV was open coded everywhere.
This reworks it all, using little helper macros for checking, and
adding the HV interrupt (which gets converted back to program check
in the slow path of excp_helper.c on CPUs that don't want it).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the linux-user/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1466066426-16657-41-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When qemu_set_log_filename() detects an invalid file name, it reports
an error, closes the log file (if any), and starts logging to stderr
(unless daemonized or nothing is being logged).
This is wrong. Asking for an invalid log file on the command line
should be fatal. Asking for one in the monitor should fail without
messing up an existing logfile.
Fix by converting qemu_set_log_filename() to Error. Pass it
&error_fatal, except for hmp_logfile report errors.
This also permits testing without a subprocess, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1466011636-6112-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AXqa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160608' into staging
linux-user pull request for June 2016
# gpg: Signature made Wed 08 Jun 2016 14:27:14 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160608: (44 commits)
linux-user: In fork_end(), remove correct CPUs from CPU list
linux-user: Special-case ERESTARTSYS in target_strerror()
linux-user: Make target_strerror() return 'const char *'
linux-user: Correct signedness of target_flock l_start and l_len fields
linux-user: Use safe_syscall wrapper for ioctl
linux-user: Use safe_syscall wrapper for accept and accept4 syscalls
linux-user: Use safe_syscall wrapper for semop
linux-user: Use safe_syscall wrapper for epoll_wait syscalls
linux-user: Use safe_syscall wrapper for poll and ppoll syscalls
linux-user: Use safe_syscall wrapper for sleep syscalls
linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall
linux-user: Use safe_syscall wrapper for flock
linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive
linux-user: Use safe_syscall wrapper for msgsnd and msgrcv
linux-user: Use safe_syscall wrapper for send* and recv* syscalls
linux-user: Use safe_syscall wrapper for connect syscall
linux-user: Use safe_syscall wrapper for readv and writev syscalls
linux-user: Fix error conversion in 64-bit fadvise syscall
linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests
linux-user: Fix handling of arm_fadvise64_64 syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
configure
scripts/qemu-binfmt-conf.sh
In fork_end(), we must fix the list of current CPUs to match the fact
that the child of the fork has only one thread. Unfortunately we were
removing the wrong CPUs from the list, which meant that if the child
subsequently did an exclusive operation it would deadlock in
start_exclusive() waiting for a sibling CPU which didn't exist.
In particular this could cause hangs doing git submodule init
operations, as reported in https://bugs.launchpad.net/qemu/+bug/955379
comment #47.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since TARGET_ERESTARTSYS and TARGET_ESIGRETURN are internal-to-QEMU
error numbers, handle them specially in target_strerror(), to avoid
confusing strace output like:
9521 rt_sigreturn(14,8,274886297808,8,0,268435456) = -1 errno=513 (Unknown error 513)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Make target_strerror() return 'const char *' rather than just 'char *';
this will allow us to return constant strings from it for some special
cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
The l_start and l_len fields in the various target_flock structures are
supposed to be '__kernel_off_t' or '__kernel_loff_t', which means they
should be signed, not unsigned. Correcting the structure definitions means
that __get_user() and __put_user() will correctly sign extend them if
the guest is using 32 bit offsets and the host is using 64 bit offsets.
This fixes failures in the LTP 'fcntl14' tests where it checks that
negative seek offsets work correctly.
We reindent the structures to drop hard tabs since we're touching 40%
of the fields anyway.
RV: long long -> abi_llong as suggested by Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper to implement the ioctl syscall.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the accept and accept4 syscalls.
accept4 has been in the kernel since 2.6.28 so we can assume it
is always present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the semop syscall or IPC operation.
(We implement via the semtimedop syscall to make it easier to
implement the guest semtimedop syscall later.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for epoll_wait and epoll_pwait syscalls.
Since we now directly use the host epoll_pwait syscall for both
epoll_wait and epoll_pwait, we don't need the configure machinery
to check whether glibc supports epoll_pwait(). (The kernel has
supported the syscall since 2.6.19 so we can assume it's always there.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the poll and ppoll syscalls.
Since not all host architectures will have a poll syscall, we
have to rewrite the TARGET_NR_poll handling to use ppoll instead
(we can assume everywhere has ppoll by now).
We take the opportunity to switch to the code structure
already used in the implementation of epoll_wait and epoll_pwait,
which uses a switch() to avoid interleaving #if and if (),
and to stop using a variable with a leading '_' which is in
the implementation's namespace.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the clock_nanosleep and nanosleep
syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the rt_sigtimedwait syscall.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the flock syscall.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for mq_timedsend and mq_timedreceive syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for msgsnd and msgrcv syscalls.
This is made slightly awkward by some host architectures providing
only a single 'ipc' syscall rather than separate syscalls per
operation; we provide safe_msgsnd() and safe_msgrcv() as wrappers
around safe_ipc() to handle this if needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the send, sendto, sendmsg, recv,
recvfrom and recvmsg syscalls.
RV: adjusted to apply
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the connect syscall.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for readv and writev syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix errors in the implementation of NR_fadvise64 and NR_fadvise64_64
for 32-bit guests, which pass their off_t values in register pairs.
We can't use the 64-bit code path for this, so split out the 32-bit
cases, so that we can correctly handle the "only offset is 64-bit"
and "both offset and length are 64-bit" syscall flavours, and
"uses aligned register pairs" and "does not" flavours of target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
32-bit ARM has an odd variant of the fadvise syscall which has
rearranged arguments, which we try to implement. Unfortunately we got
the rearrangement wrong.
This is a six-argument syscall whose arguments are:
* fd
* advise parameter
* offset high half
* offset low half
* len high half
* len low half
Stop trying to share code with the standard fadvise syscalls,
and just implement the syscall with the correct argument order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use cfi directives in the x86-64 safe_syscall to allow gdb to get
backtraces right from within it. (In particular this will be
quite a common situation if the user interrupts QEMU while it's
in a blocked safe-syscall: at the point of the syscall insn RBP
is in use for something else, and so gdb can't find the frame then
without assistance.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The siginfo_t struct includes a union. The correct way to identify
which fields of the union are relevant is complicated, because we
have to use a combination of the si_code and si_signo to figure out
which of the union's members are valid. (Within the host kernel it
is always possible to tell, but the kernel carefully avoids giving
userspace the high 16 bits of si_code, so we don't have the
information to do this the easy way...) We therefore make our best
guess, bearing in mind that a guest can spoof most of the si_codes
via rt_sigqueueinfo() if it likes. Once we have made our guess, we
record it in the top 16 bits of the si_code, so that tswap_siginfo()
later can use it. tswap_siginfo() then strips these top bits out
before writing si_code to the guest (sign-extending the lower bits).
This fixes a bug where fields were sometimes wrong; in particular
the LTP kill10 test went into an infinite loop because its signal
handler got a si_pid value of 0 rather than the pid of the sending
process.
As part of this change, we switch to using __put_user() in the
tswap_siginfo code which writes out the byteswapped values to
the target memory, in case the target memory pointer is not
sufficiently aligned for the host CPU's requirements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If there is a signal pending during fork() the signal handler will
erroneously be called in both the parent and child, so handle any
pending signals first.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-20-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the kill, tkill and tgkill syscalls.
Without this, if a thread sent a SIGKILL to itself it could kill the
thread before we had a chance to process a signal that arrived just
before the SIGKILL, and that signal would get lost.
We drop all the ifdeffery for tkill and tgkill, because every guest
architecture we support implements them, and they've been in Linux
since 2003 so we can assume the host headers define the __NR_tkill
and __NR_tgkill constants.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Without this a signal could vanish on thread exit.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-26-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix races between signal handling and the pause syscall by
reimplementing it using block_signals() and sigsuspend().
(Using safe_syscall(pause) would also work, except that the
pause syscall doesn't exist on all architectures.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-28-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Block signals while emulating sigaction. This is a non-interruptible
syscall, and using block_signals() avoids races where the host
signal handler is invoked and tries to examine the signal handler
data structures while we are updating them.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-29-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: expanded commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If a synchronous signal and an asynchronous signal arrive near simultaneously,
and the signal number of the asynchronous signal is lower than that of the
synchronous signal the the handler for the asynchronous would be called first,
and then the handler for the synchronous signal would be called within or
after the first handler with an incorrect context.
This is fixed by queuing synchronous signals separately. Note that this does
risk delaying a asynchronous signal until the synchronous signal handler
returns rather than handling the signal on another thread, but this seems
unlikely to cause problems for real guest programs and is unavoidable unless
we could guarantee to roll back and reexecute whatever guest instruction
caused the synchronous signal (which would be a bit odd if we've already
logged its execution, for instance, and would require careful analysis of
all guest CPUs to check it was possible in all cases).
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-24-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: added a comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As host signals are now blocked whenever guest signals are blocked, the
queue of realtime signals is now in Linux. The QEMU queue is now
redundant and can be removed. (We already did not queue non-RT signals, and
none of the calls to queue_signal() except the one in host_signal_handler()
pass an RT signal number.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-23-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Both queue_signal() and process_pending_signals() did check for default
actions of signals, this is redundant and also causes fatal and stopping
signals to incorrectly cause guest system calls to be interrupted.
The code in queue_signal() is removed.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-21-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If multiple host signals are received in quick succession they would
be queued in TaskState then delivered to the guest in spite of
signals being supposed to be blocked by the guest signal handler's
sa_mask. Fix this by decoupling the guest signal mask from the
host signal mask, so we can have protected sections where all
host signals are blocked. In particular we block signals from
when host_signal_handler() queues a signal from the guest until
process_pending_signals() has unqueued it. We also block signals
while we are manipulating the guest signal mask in emulation of
sigprocmask and similar syscalls.
Blocking host signals also ensures the correct behaviour with respect
to multiple threads and the overrun count of timer related signals.
Alas blocking and queuing in qemu is still needed because of virtual
processor exceptions, SIGSEGV and SIGBUS.
Blocking signals inside process_pending_signals() protects against
concurrency problems that would otherwise happen if host_signal_handler()
ran and accessed the signal data structures while process_pending_signals()
was manipulating them.
Since we now track the guest signal mask separately from that
of the host, the sigsuspend system calls must track the signal
mask passed to them, because when we process signals as we leave
the sigsuspend the guest signal mask in force is that passed to
sigsuspend.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-19-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: make signal_pending a simple flag rather than a word with two flag bits;
ensure we don't call block_signals() twice in sigreturn codepaths;
document and assert() the guarantee that using do_sigprocmask() to
get the current mask never fails; use the qemu atomics.h functions
rather than raw volatile variable access; add extra commentary and
documentation; block SIGSEGV/SIGBUS in block_signals() and in
process_pending_signals() because they can't occur synchronously here;
check the right do_sigprocmask() call for errors in ssetmask syscall;
expand commit message; fixed sigsuspend() hanging]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for sigsuspend syscalls. This
means that we will definitely deliver a signal that arrives
before we do the sigsuspend call, rather than blocking first
and delivering afterwards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some host syscalls take an argument specifying the size of a
host kernel's sigset_t (which isn't necessarily the same as
that of the host libc's type of that name). Instead of hardcoding
_NSIG / 8 where we do this, define and use a SIGSET_T_SIZE macro.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All the architecture specific handlers for sigreturn include calls
to do_sigprocmask(SIGSETMASK, &set, NULL) to set the signal mask
from the uc_sigmask in the context being restored. Factor these
out into calls to a set_sigmask() function. The next patch will
want to add code which is not run when setting the signal mask
via do_sigreturn, and this change allows us to separate the two
cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix a stray tab-indented linux in linux-user/signal.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Move the handle_pending_signal() function above process_pending_signals()
to avoid the need for a forward declaration. (Whitespace only change.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Factor out the code to handle a single signal from the
process_pending_signals() function. The use of goto for flow control
is OK currently, but would get significantly uglier if extended to
allow running the handle_signal code multiple times.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently, if not specified in "./configure", QEMU_PKGVERSION will be
empty. Write a rule in Makefile to generate a value from "git describe"
combined with a possible git tree cleanness suffix, and write into a new
header.
$ cat qemu-version.h
#define QEMU_PKGVERSION "-v2.6.0-557-gd6550e9-dirty"
Include the header in .c files where the macro is referenced. It's not
necessary to include it in all files, otherwise each time the content of
the file changes, all sources have to be recompiled.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464774261-648-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some IFLA_* symbols can be missing in the host linux/if_link.h,
but as they are enums and not "#defines", check in "configure" if
last known (IFLA_PROTO_DOWN) is available and if not, disable
management of NETLINK_ROUTE protocol.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This is, for instance, needed to log in a container.
Without this, the user cannot be identified and the console login
fails with "Login incorrect".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This is the protocol used by udevd to manage kernel events.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
rtnetlink is needed to use iproute package (ip addr, ip route)
and dhcp client.
Examples:
Without this patch:
# ip link
Cannot open netlink socket: Address family not supported by protocol
# ip addr
Cannot open netlink socket: Address family not supported by protocol
# ip route
Cannot open netlink socket: Address family not supported by protocol
# dhclient eth0
Cannot open netlink socket: Address family not supported by protocol
Cannot open netlink socket: Address family not supported by protocol
With this patch:
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT qlen 1000
link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
# ip addr show eth0
51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.197/24 brd 192.168.122.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::216:3eff:fe89:6bd7/64 scope link
valid_lft forever preferred_lft forever
# ip route
default via 192.168.122.1 dev eth0
192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.197
# ip addr flush eth0
# ip addr add 192.168.122.10 dev eth0
# ip addr show eth0
51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.10/32 scope global eth0
valid_lft forever preferred_lft forever
# ip route add 192.168.122.0/24 via 192.168.122.10
# ip route
192.168.122.0/24 via 192.168.122.10 dev eth0
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
setup_frame()/setup_rt_frame()/restore_user_regs() are using
MSR_LE as the similar kernel functions do: as a bitmask.
But in QEMU, MSR_LE is a bit position, so change this
accordingly.
The previous code was doing nothing as MSR_LE is 0,
and "env->msr &= ~MSR_LE" doesn't change the value of msr.
And yes, a user process can change its endianness,
see linux kernel commit:
fab5db9 [PATCH] powerpc: Implement support for setting little-endian mode via prctl
and prctl(2): PR_SET_ENDIAN, PR_GET_ENDIAN
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The return address is in target space, so the restorer address needs to
be target space, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
The return address is in target space, so the restorer address needs to
be target space, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Original implementation uses do_rt_sigreturn directly in host space,
when a guest program is in unwind procedure in guest space, it will get
an incorrect restore address, then causes unwind failure.
Also cleanup the original incorrect indentation.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The #defines of ARM_cpsr and friends in linux-user/arm/target-syscall.h
can clash with versions in the system headers if building on an
ARM or AArch64 build (though this seems to be dependent on the version
of the system headers). The QEMU defines are not very useful (it's
not clear that they're intended for use with the target_pt_regs struct
rather than (say) the CPUARMState structure) and we only use them in one
function in elfload.c anyway. So just remove the #defines and directly
access regs->uregs[].
Reported-by: Christopher Covington <cov@codeaurora.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On Linux the setuid(), setgid(), etc system calls have different semantics
from the libc functions. The libc functions follow POSIX and update the
credentials for all threads in the process; the system calls update only
the thread which makes the call. (This impedance mismatch is worked around
in libc by signalling all threads to tell them to do a syscall, in a
byzantine and fragile way; see http://ewontfix.com/17/.)
Since in linux-user we are trying to emulate the system call semantics,
we must implement all these syscalls to directly call the underlying
host syscall, rather than calling the host libc function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 64-bit x86 syscall ABI uses 32-bit UIDs; only define
USE_UID16 for 32-bit x86.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In do_msgrcv() we want to allocate a message buffer, whose size
is passed to us by the guest. That means we could legitimately
fail, so use g_try_malloc() and handle the error case, in the same
way that do_msgsnd() does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The msgrcv ABI is a bit odd -- the msgsz argument is a size_t, which is
unsigned, but it must fail EINVAL if the value is negative when cast
to a long. We were incorrectly passing the value through an
"unsigned int", which meant that if the guest was 32-bit longs and
the host was 64-bit longs an input of 0xffffffff (which should trigger
EINVAL) would simply be passed to the host msgrcv() as 0xffffffff,
where it does not cause the host kernel to reject it.
Follow the same approach as do_msgsnd() in using a ssize_t and
doing the check for negative values by hand, so we correctly fail
in this corner case.
This fixes the msgrcv03 Linux Test Project test case, which otherwise
hangs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In a struct timespec, both fields are signed longs. Converting
them from guest to host with code like
host_ts->tv_sec = tswapal(target_ts->tv_sec);
mishandles negative values if the guest has 32-bit longs and
the host has 64-bit longs because tswapal()'s return type is
abi_ulong: the assignment will zero-extend into the host long
type rather than sign-extending it.
Make the conversion routines use __get_user() and __set_user()
instead: this automatically picks up the signedness of the
field type and does the correct kind of sign or zero extension.
It also handles the possibility that the target struct is not
sufficiently aligned for the host's requirements.
In particular, this fixes a hang when running the Linux Test Project
mq_timedsend01 and mq_timedreceive01 tests: one of the test cases
sets the timeout to -1 and expects an EINVAL failure, but we were
setting a very long timeout instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the futex syscall.
In particular, this fixes hangs when using programs that link
against the Boehm garbage collector, including the Mono runtime.
(We don't change the sys_futex() call in the implementation of
the exit syscall, because as the FIXME comment there notes
that should be handled by disabling signals, since we can't
easily back out if the futex were to return ERESTARTSYS.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the pselect and select syscalls.
Since not every architecture has the select syscall, we now
have to implement select in terms of pselect, which means doing
timeval<->timespec conversion.
(Five years on from the initial patch that added pselect support
to QEMU and a decade after pselect6 went into the kernel, it seems
safe to not try to support hosts with header files which don't
define __NR_pselect6.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Wrap execve() in the safe-syscall handling. Although execve() is not
an interruptible syscall, it is a special case: if we allow a signal
to happen before we make the host$ syscall then we will 'lose' it,
because at the point of execve the process leaves QEMU's control. So
we use the safe syscall wrapper to ensure that we either take the
signal as a guest signal, or else it does not happen before the
execve completes and makes it the other program's problem.
The practical upshot is that without this SIGTERM could fail to
terminate the process.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-25-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: expanded commit message to explain in more detail why this is
needed, and add comment about it too]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use safe_syscall for waitpid, waitid and wait4 syscalls. Note that this
change allows us to implement support for waitid's fifth (rusage) argument
in future; for the moment we ignore it as we have done up til now.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-18-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjust to new safe_syscall convention. Add fifth waitid syscall argument
(which isn't present in the libc interface but is in the syscall ABI)]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Restart open() and openat() if signals occur before,
or during with SA_RESTART.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-17-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjusted to follow new -1-and-set-errno safe_syscall convention]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Restart read() and write() if signals occur before, or during with SA_RESTART
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-15-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Update to new safe_syscall() convention of setting errno]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If a signal is delivered immediately before a blocking system call the
handler will only be called after the system call returns, which may be a
long time later or never.
This is fixed by using a function (safe_syscall) that checks if a guest
signal is pending prior to making a system call, and if so does not call the
system call and returns -TARGET_ERESTARTSYS. If a signal is received between
the check and the system call host_signal_handler() rewinds execution to
before the check. This rewinding has the effect of closing the race window
so that safe_syscall will reliably either (a) go into the host syscall
with no unprocessed guest signals pending or or (b) return
-TARGET_ERESTARTSYS so that the caller can deal with the signals.
Implementing this requires a per-host-architecture assembly language
fragment.
This will also resolve the mishandling of the SA_RESTART flag where
we would restart a host system call and not call the guest signal handler
until the syscall finally completed -- syscall restarting now always
happens at the guest syscall level so the guest signal handler will run.
(The host syscall will never be restarted because if the host kernel
rewinds the PC to point at the syscall insn for a restart then our
host_signal_handler() will see this and arrange the guest PC rewind.)
This commit contains the infrastructure for implementing safe_syscall
and the assembly language fragment for x86-64, but does not change any
syscalls to use it.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM:
* Avoid having an architecture if-ladder in configure by putting
linux-user/host/$(ARCH) on the include path and including
safe-syscall.inc.S from it
* Avoid ifdef ladder in signal.c by creating new hostdep.h to hold
host-architecture-specific things
* Added copyright/license header to safe-syscall.inc.S
* Rewrote commit message
* Added comments to safe-syscall.inc.S
* Changed calling convention of safe_syscall() to match syscall()
(returns -1 and host error in errno on failure)
* Added a long comment in qemu.h about how to use safe_syscall()
to implement guest syscalls.
]
RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts"
patch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If DEBUG_ERESTARTSYS is set restart all system calls once. This
is pure debug code for exercising the syscall restart code paths
in the per-architecture cpu main loops.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-10-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Add comment and a commented-out #define next to the commented-out
generic DEBUG #define; remove the check on TARGET_USE_ERESTARTSYS;
tweak comment message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the Microblaze main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this in passing fixes a bug where we were corrupting
the guest r[3] on sigreturn with the guest's r[10] because
do_sigreturn() was returning env->regs[10] but the register for
syscall return values is env->regs[3].
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-11-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define;
drop whitespace changes]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All syscall exits on microblaze result in r14 being equal to the
PC we return to, because the kernel syscall exit instruction "rtbd"
does this. (This is true even for sigreturn(); note that r14 is
not a userspace-usable register as the kernel may clobber it at
any point.)
Emulate the setting of r14 on exit; this isn't really a guest
visible change for valid guest code because r14 isn't reliably
observable anyway. However having the code and the comment helps
to explain why it's ok for the ERESTARTSYS handling not to undo
the changes to r14 that happen on syscall entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the tilegx main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* return -TARGET_QEMU_ESIGRETURN from sigreturn rather than current R_RE
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this fixes a bug where a sigreturn which happened to have
an errno value in TILEGX_R_RE would incorrectly cause TILEGX_R_ERR
to get set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the CRIS main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-34-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the S390 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-33-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; remove stray double semicolon; drop
TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the M68K main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-32-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the OpenRISC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't implement sigreturn on this target so there is no
code there to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-31-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the UniCore32 main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't support signals on this target so there is no sigreturn code
to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-30-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the Alpha main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-13-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define;
PC is env->pc, not env->ir[IR_PV]]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SH4 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-12-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SPARC main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-9-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the 32-bit and 64-bit ARM main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-6-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the x86 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code rather than passing it
back out as the "return code" from do_sigreturn()
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch EAX
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-5-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN
only on the MIPS and PPC targets; move this to errno_defs.h
so it is available for all architectures, and renumber it to 513.
We pick 513 because this is safe from future use as a system call return
value: Linux uses it as ERESTART_NOINTR internally and never allows that
errno to escape to userspace.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Define TARGET_ERESTARTSYS; like the kernel, we will use this to
indicate that a guest system call should be restarted. We use
the same value the kernel does for this, 512.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
[PMM: split out from the patch which moves and renumbers
TARGET_QEMU_ESIGRETURN, add comment on usage]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some of the signal handling was a mess with a mixture of tabs and 8 space
indents.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-3-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: just rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function do_openat() is not consistent about whether it is
returning a host errno or a guest errno in case of failure.
Standardise on returning -1 with errno set (ie caller has
to call get_errno()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This decouples logging further from config-target.h
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new-in-ARMv8 YIELD instruction has been implemented to throw
an EXCP_YIELD back up to the QEMU main loop. In system emulation
we use this to decide to schedule a different guest CPU in SMP
configurations. In usermode emulation there is nothing to do,
so just ignore it and resume the guest.
This prevents an abort with "unhandled CPU exception 0x10004"
if the guest process uses the YIELD instruction.
Reported-by: Hunter Laux <hunterlaux@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1456833171-31900-1-git-send-email-peter.maydell@linaro.org
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.
This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().
This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.
Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.
We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now that CPSR.E is set correctly, prepare for when setend will be able
to change it; bswap data in and out of strex manually by comparing
SCTLR.B, CPSR.E and TARGET_WORDS_BIGENDIAN (we do not have the luxury
of using TCGMemOps).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Moved SCTLR/CPSR logic to arm_cpu_data_is_big_endian
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If doing big-endian linux-user mode, set both the CPSR.E and SCTLR.E0E
bits. This sets big-endian mode for data accesses.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bswap_code is a CPU property of sorts ("is the iside endianness the
opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the
actual CPU state involved here which is SCTLR.B (set for BE32
binaries, clear for BE8).
Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code.
The next patches will make data fetches honor both SCTLR.B and
CPSR.E appropriately.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased on master (Jan 2016)
* s/TARGET_USER_ONLY/CONFIG_USER_ONLY
* Use bswap_code() for disas_set_info() instead of raw sctlr_b
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This matches the idiom used by get_user_data_* later in the series,
and will help when bswap_code will be replaced by SCTLR.B.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When linux-user code is calling cpsr_write(), use a restrictive
mask to ensure we are limiting the set of CPSR bits we update.
In particular, don't allow the mode bits to be changed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-5-git-send-email-peter.maydell@linaro.org
Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
getrandom() has been introduced in kernel 3.17 and is now used during
the boot sequence of Debian unstable (stretch/sid).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
x86, m68k, ppc, sh4 and sparc failed to enable timerfd, because they
didn't have timerfd_create system call defined. Instead QEMU
defined timerfd syscall. Checking with kernel sources, it appears
kernel developers reused timerfd syscall number with timerfd_create,
presumably since no userspace called the old syscall number.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU lists deprecated system call numbers in for Aarch64. These
are never enabled for Linux kernel, so don't define them in Qemu
either. Remove the ifdef around host_to_target_stat64 since
all architectures need it now.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Sync syscall numbers to match the linux v4.5-rc1 kernel.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Our implementation of shmat() and shmdt() for linux-user was
using "zero guest address" as its marker for "entry in the
shm_regions[] array is not in use". This meant that if the
guest did a shmdt(0) we would match on an unused array entry
and call page_set_flags() with both start and end addresses zero,
which causes an assertion failure.
Use an explicit in_use flag to manage the shm_regions[] array,
so that we avoid this problem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Pavel Shamis <pasharesearch@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Set the default to the latest CPU version to have the
largest set of available features.
It is also really needed in little-endian mode because
POWER7 is not really supported in this mode and some distros
(at least debian) generate POWER8 code for their ppc64le target.
Fixes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813698
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This fixes double-definitions in linux-user builds when using the UST
tracing backend (which indirectly includes the system's "syscall.h").
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
target_fd_trans is an array of "TargetFdTrans *": compute size
accordingly. Use g_renew() as proposed by Paolo.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WeIo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160111' into staging
January 2016 Linux-user queque
# gpg: Signature made Mon 11 Jan 2016 14:13:57 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160111:
linux-user/mmap.c: Use end instead of real_end in target_mmap
linux-user: Add SOCKOP_sendmmsg and SOCKOP_recvmmsg socket call, wire them up.
linux-user: Update m68k syscall definitions to match Linux 4.4.
linux-user/syscall.c: Use SOL_SOCKET instead of level for setsockopt()
linux-user: enable sigaltstack for all architectures
unicore32: convert get_sp_from_cpustate from macro to inline
linux-user/mmap.c: Always zero MAP_ANONYMOUS memory in mmap_frag()
linux-user,sh4: fix signal retcode address
linux-user: check fd is >= 0 in fd_trans_host_to_target_data/fd_trans_host_to_target_addr
linux-user: manage bind with a socket of SOCK_PACKET type.
linux-user: add a function hook to translate sockaddr
linux-user: rename TargetFdFunc to TargetFdDataFunc, and structure fields accordingly
linux-user: SOCK_PACKET uses network endian to encode protocol in socket()
linux-user/syscall.c: malloc()/calloc() to g_malloc()/g_try_malloc()/g_new0()
linux-user: in poll(), if nfds is 0, pfd can be NULL
linux-user: correctly align target_epoll_event
linux-user: add signalfd/signalfd4 syscalls
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The fragment must effectively be mapped only to "end" not to "real_end"
(which is a host page aligned address, and thus this is not a fragment).
It is consistent with what it is done in the case of one single page.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds the definitions for the socket calls SOCKOP_sendmmsg
and SOCKOP_recvmmsg and wires them up with the rest of the code.
The necessary function do_sendrecvmmsg() is already present in
linux-user/syscall.c. After adding these two definitions and wiring
them up, I no longer receive an error message about the
unimplemented socket calls when running "apt-get update" on Debian
unstable running on qemu with glibc_2.21 on m68k.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In this case, level is TARGET_SOL_SOCKET, but we need SOL_SOCKET for
setsockopt().
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This change covers arm, aarch64, mips. Others to follow?
The change was prompted by QEMU warning about a syscall 384 (get_random())
with Debian armhf binaries (ARMv7).
Signed-off-by: Johan Ouwerkerk <jm.ouwerkerk@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.
If some architecture is not ready for this, that architecture
should be fixed instead.
This fixes LP#1516408.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
