The semun union used in the semctl system call contains both an int (val) and
pointers. In cross-endian situations on 64 bit targets, the value passed to
semctl is an 8 byte (abi_long) value and thus does not have the 4-byte val
field in the correct location. In order to rectify this, the other half
of the union must be accessed. This is achieved in code by performing
a byte swap on the entire 8 byte union, followed by a 4-byte swap of the
first half.
Also, eliminate an extraneous (dead) line of code that sets target_su.val in
the IPC_SET/IPC_GET case.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When the ipc system call is used to wrap a semctl system call,
the ptr argument to ipc needs to be dereferenced prior to passing
it to the semctl handler. This is because the fourth argument to
semctl is a union and not a pointer to a union.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 64 bit PowerPC platforms eliminate the _unused1 and _unused2
elements of the semid_ds structure from <sys/sem.h>. So eliminate
these from the target_semid_ds structure.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the setns and unshare syscalls, trivially passed through to
the host. Based on patches by Paul Burton, added configure check.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the ioprio_get & ioprio_set syscalls, allowing their
use by target programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds support for the timerfd_create, timerfd_gettime & timerfd_settime
syscalls, allowing use of timerfds by target programs.
v2: By Riku - added configure check for timerfd and ifdefs
for benefit of old distributions like RHEL5.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The current code always returns the length of the path when it should
be returning the number of bytes it wrote to the output string.
Further, readlink is not supposed to append a NUL byte, but the current
snprintf logic will always do just that.
Even further, if you pass in a length of 0, you're suppoesd to get back
an error (EINVAL), but the current logic just returns 0.
Further still, if there was an error reading the symlink, we should not
go ahead and try to read the target buffer as it is garbage.
Simple test for the first two issues:
$ cat test.c
int main() {
char buf[50];
size_t len;
for (len = 0; len < 10; ++len) {
memset(buf, '!', sizeof(buf));
ssize_t ret = readlink("/proc/self/exe", buf, len);
buf[20] = '\0';
printf("readlink(/proc/self/exe, {%s}, %zu) = %zi\n", buf, len, ret);
}
return 0;
}
Now compare the output of the native:
$ gcc test.c -o /tmp/x
$ /tmp/x
$ strace /tmp/x
With what qemu does:
$ armv7a-cros-linux-gnueabi-gcc test.c -o /tmp/x -static
$ qemu-arm /tmp/x
$ qemu-arm -strace /tmp/x
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There were a number of bugs in the conversion of the sigevent
argument to timer_create from target to host format:
* signal number not converted from target to host
* thread ID not copied across
* sigev_value not copied across
* we never unlocked the struct when we were done
Between them, these problems meant that SIGEV_THREAD_ID
timers (and the glibc-implemented SIGEV_THREAD timers which
depend on them) didn't work.
Fix these problems and clean up the code a little by pulling
the struct conversion out into its own function, in line with
how we convert various other structs. This allows the test
program in bug LP:1042388 to run.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently syscall instruction is buggy on user mode X86_64,
the EIP is updated after do_syscall(), that is too late for
clone(). Because clone() will create a thread at the env->EIP
(the address of syscall insn), and then child thread enters
do_syscall() again, that is not expected. Sometimes it is tragic.
User mode syscall insn emulation is not used MSR, so the
action should be same to INT 0x80. INT 0x80 will update EIP in
do_interrupt(), ditto for syscall() for consistency.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
While Mikhail fixed /proc/self/maps, it was noticed openat calls are
not redirected currently. Some archs don't have open at all, so
openat needs to be redirected.
Fix this by consolidating open/openat code to do_openat - open
is implemented using openat(AT_FDCWD, ... ), which according
to open(2) man page is identical.
Since all targets now have openat, remove the ifdef around sys_openat
and openat: case in do_syscall.
Cc: Mikhail Ilin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Build /proc/self/maps doing a match against guest memory translation table.
Output only that map records which are valid for guest memory layout.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Instead of bdrv_getlength().
Commit 57322b7 did this all over block, but one more bdrv_getlength()
has crept in since.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise error_callback_bh will access the already released acb.
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following O_DIRECT read from a <512 byte file fails:
$ truncate -s 320 test.img
$ qemu-io -n -c 'read -P 0 0 512' test.img
qemu-io: can't open device test.img: Could not read image for determining its format: Invalid argument
Note that qemu-io completes successfully without the -n (O_DIRECT)
option.
This patch fixes qemu-iotests ./check -nocache -vmdk 059.
Cc: qemu-stable@nongnu.org
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bs->total_sectors is not yet updated at this point. resulting
in memory corruption if the volume has grown and data is written
to the newly availble areas.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just log to stderr unconditionally, like other similar code does.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU needs to call semctl() for correct operation. This particular
problem was identified on shutdown with the following commandline:
# qemu -sandbox on -monitor stdio \
-device intel-hda -device hda-duplex -vnc :0
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
When memory is allocated on a wrong node, MPOL_MF_STRICT
doesn't move it - it just fails the allocation.
A simple way to reproduce the failure is with mlock=on
realtime feature.
The code comment actually says: "ensure policy won't be ignored"
so setting MPOL_MF_MOVE seems like a better way to do this.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As already done for kvm_cpu_synchronize_state(), let's trigger
kvm_arch_put_registers() via run_on_cpu() for kvm_cpu_synchronize_post_reset()
and kvm_cpu_synchronize_post_init().
This way, we make sure that the register synchronizing ioctls are
called from the proper vcpu thread; this avoids calls to
synchronize_rcu() in the kernel.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Testing a real in-use protocol such as NBD is hard; testing blkdebug and
blkverify in its stead is easier and tests basically the same
functionality.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because blkdebug cannot simply create a configuration file, simply
refuse to reconstruct a plain filename and only generate an options
QDict from the rules instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some block devices may not have a filename in their BDS; and for some,
there may not even be a normal filename at all. To work around this, add
a function which tries to construct a valid filename for the
BDS.filename field.
If a filename exists or a block driver is able to reconstruct a valid
filename (which is placed in BDS.exact_filename), this can directly be
used.
If no filename can be constructed, we can still construct an options
QDict which is then converted to a JSON object and prefixed with the
"json:" pseudo protocol prefix. The QDict is placed in
BDS.full_open_options.
For most block drivers, this process can be done automatically; those
that need special handling may define a .bdrv_refresh_filename() method
to fill BDS.exact_filename and BDS.full_open_options themselves.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In function virtio_blk_handle_request, it may freed memory pointed by req,
So do not access member of req after calling this function.
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that block_resize acquires the AioContext we can safely allow
resizing the disk.
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make block_resize safe for dataplane where another thread may be running
the BlockDriverState's AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need to filter out driver-specific options in the "Formatting..."
string printed by qemu when creating the backup image.
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
This test runs dummy function with coroutine by using
two enter and one yield since which is a common usage.
So we can see the cost introduced by corouting for running
one function, for example:
Run operation 20000000 iterations 4.841071 s, 4131K operations/s
242ns per coroutine
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test which tests various combinations of qcow2's cache options
(some of which are valid, some of which are not).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add options for specifying the size of the metadata caches. This can
either be done directly for each cache (if only one is given, the other
will be derived according to a default ratio) or combined for both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With a variable cache size, the number given to qcow2_cache_create() may
be huge. Therefore, use g_try_new0().
While at it, use g_new0() instead of g_malloc0() for allocating the
Qcow2Cache object.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specifying the metadata cache sizes in clusters results in less clusters
(and much less bytes) covered for small cluster sizes and vice versa.
Using a constant byte size reduces this difference, and makes it
possible to manually specify the cache size in an easily comprehensible
unit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a program under test get frozen, the test should finish and report about its
failure.
In such cases the runner waits for 10 minutes until the program ends its
execution. After this time-out the program will be terminated and the test will
be marked as failed.
For current limitation of test image size to 10 MB as a maximum an execution of
each command takes about several seconds in general, so 10 minutes is enough to
discriminate freeze, but not drastically increase an overall test duration.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After the specified duration the runner stops executing new tests, but it
doesn't interrupt running ones.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Maria Kustova <maria.k@catit.be>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
They clutter the code. Unfortunately, I can't figure out how to make
Coccinelle drop all of them, so I have to settle for common special
cases:
@@
type T;
T *pt;
void *pv;
@@
- pt = (T *)pv;
+ pt = pv;
@@
type T;
@@
- (T *)
(\(g_malloc\|g_malloc0\|g_realloc\|g_new\|g_new0\|g_renew\|
g_try_malloc\|g_try_malloc0\|g_try_realloc\|
g_try_new\|g_try_new0\|g_try_renew\)(...))
Topped off with minor manual style cleanups.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is safer than g_malloc(sizeof(*v) * n) for two reasons.
One, it catches multiplication overflowing size_t. Two, it returns
T * rather than void *, which lets the compiler catch more type
errors.
Perhaps a conversion to g_malloc_n() would be neater in places, but
that's merely four years old, and we can't use such newfangled stuff.
This commit only touches allocations with size arguments of the form
sizeof(T), plus two that use 4 instead of sizeof(uint32_t). We can
make the others safe by converting to g_malloc_n() when it becomes
available to us in a couple of years.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* fix preferred return address for A64 BRK insn
* implement AArch64 single-stepping
* support loading gzip compressed AArch64 kernels
* use correct PSCI function IDs in the DT when KVM uses PSCI 0.2
* minor cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+uR+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140819' into staging
target-arm:
* fix preferred return address for A64 BRK insn
* implement AArch64 single-stepping
* support loading gzip compressed AArch64 kernels
* use correct PSCI function IDs in the DT when KVM uses PSCI 0.2
* minor cleanups
# gpg: Signature made Tue 19 Aug 2014 19:04:09 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140819:
arm: stellaris: Remove misleading address_space_mem var
arm: armv7m: Rename address_space_mem -> system_memory
aarch64: Allow -kernel option to take a gzip-compressed kernel.
loader: Add load_image_gzipped function.
arm: cortex-a9: Fix cache-line size and associativity
arm/virt: Use PSCI v0.2 function IDs in the DT when KVM uses PSCI v0.2
target-arm: Rename QEMU PSCI v0.1 definitions
target-arm: Implement MDSCR_EL1 as having state
target-arm: Implement ARMv8 single-stepping for AArch32 code
target-arm: Implement ARMv8 single-step handling for A64 code
target-arm: A64: Avoid duplicate exit_tb(0) in non-linked goto_tb
target-arm: Set PSTATE.SS correctly on exception return from AArch64
target-arm: Correctly handle PSTATE.SS when taking exception to AArch32
target-arm: Don't allow AArch32 to access RES0 CPSR bits
target-arm: Adjust debug ID registers per-CPU
target-arm: Provide both 32 and 64 bit versions of debug registers
target-arm: Allow STATE_BOTH reginfo descriptions for more than cp14
target-arm: Collect up the debug cp register definitions
target-arm: Fix return address for A64 BRK instructions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's a MemoryRegion and not an AddressSpace. But since it's single use,
just inline the get_system_memory() call to the only usage to remove it.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d6914047e10b956514cfaa5f391ef56c7d851b34.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This argument is a MemoryRegion and not an AddressSpace.
"Address space" means something quite different to "memory region"
in QEMU parlance so rename the variable to reduce confusion.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f666cf7f2318d9b461b1e320a45bf0d82da9b7dd.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On aarch64 it is the bootloader's job to uncompress the kernel. UEFI
and u-boot bootloaders do this automatically when the kernel is
gzip-compressed.
However the qemu -kernel option does not do this. The following
command does not work:
qemu-system-aarch64 [...] -kernel /boot/vmlinuz
because it tries to execute the gzip-compressed data.
This commit lets gzip-compressed kernels be uncompressed
transparently.
Currently this is only done when emulating aarch64.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-3-git-send-email-rjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the name suggests this lets you load a ROM/disk image that is
gzipped. It is uncompressed before storing it in guest memory.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-2-git-send-email-rjones@redhat.com
[PMM: removed stray space before ')']
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For A9, The cache associativity is 4 and the lines size is 32B.
Self identify in CCSIDR accordingly. Cache size remains at 16k.
QEMU doesn't emulate caches, but we should still report the correct
cache-line size to the guest. Some guests (like u-boot) complain if
the cache-line size mismatches a requested flush or invalidate
operation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1de6bd40155a1d2f2e93e24b1b1d1d677a432641.1408346233.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current code supplies the PSCI v0.1 function IDs in the DT even when
KVM uses PSCI v0.2.
This will break guest kernels that only support PSCI v0.1 as they will
use the IDs provided in the DT. Guest kernels with PSCI v0.2 support
are not affected by this patch, because they ignore the function IDs in
the device tree and rely on the architecture definition.
Define QEMU versions of the constants and check that they correspond to
the Linux defines on Linux build hosts. After this patch, both guest
kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should
work.
Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest
only). Both cases tested with 3.14 and linus/master and verified I
could bring up 2 cpus with both guest kernels. Also tested 32-bit with
a 3.14 host kernel with only PSCI v0.1 and both guests booted here as
well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
