This test currently fails when run on a host for which the QEMU target
has no default machine set:
ERROR| Output: qemu-system-aarch64: No machine specified, and there is
no default
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We deprecated the C virtiofsd in commit 34deee7b6a
in v7.0 in favour of the Rust implementation at
https://gitlab.com/virtio-fs/virtiofsd
since then, the Rust version has had more development and
has held up well. It's time to say goodbye to the C version
that got us going.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0FYt
-----END PGP SIGNATURE-----
Merge tag 'pull-virtiofs-20230216b' of https://gitlab.com/dagrh/qemu into staging
Remove C virtiofsd
We deprecated the C virtiofsd in commit 34deee7b6a
in v7.0 in favour of the Rust implementation at
https://gitlab.com/virtio-fs/virtiofsd
since then, the Rust version has had more development and
has held up well. It's time to say goodbye to the C version
that got us going.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmPudNkACgkQBRYzHrxb
# /ed2ZBAAlz+bjTIoWjJr5/5nSjydd5ucARYDX4n0PI2byVDHFVaUCTIi+rLrxCYs
# qnb7HVmQW4y6zy15sM1xsbqSyrVgqvDheAJPWVekkoIuVT1t6wVpAZ7sykwx8U1I
# ge2T6pXcc4xKptyGnMAB0v0T5r9hN2Peghg3/KBn6WSD1WM2rD6KmvU4untYOeST
# I/KeoEDc4WUHtaPoDIduQlEcxGKJft6ifS0ksL0Jlf06aDg9UXxcuovtN6GtmnD2
# oNPYR0qG6aN4FynTrcVBN38N3cEosdCtEK0kgvbxulnQ4Iwxyi9hBkvUJA3UmjQ/
# THkWa9Gl+bFTGfNFxUEBV+0bBI46MFn2zXmpatPeV6NvKhiaDi4DDUczueUH1+s+
# C5KWYN3LuDznmM2NQzFipG1NtP2tif6wM2dYTOHf62n4UZBSe0xSdM1OKwqKXQnN
# w5TPlZEvnaYY7vz2fjDlnLKAD9WxlxvMYjr/eJrrjDPSWGxAoe59q0nXBlzXi1Bl
# 6GcCqt/GQpLbY9X2l2pb1bvFOZcPtPZ6CiLBCslKZ5MxmiCvZWnJQ2ZHe9ccQeUX
# 22wWB5gkvWz/1bPddQR7JJ48HxBEPRd4aZ93A3jJfZqWCaTaHQ6bZboghVywMbXJ
# P0wkwaXsFshcyuZfus/dq61y+jsIVR3EyxxRMxd2rO6Mg6nvTcs=
# =0FYt
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Feb 2023 18:24:25 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* tag 'pull-virtiofs-20230216b' of https://gitlab.com/dagrh/qemu:
virtiofsd: Swing deprecated message to removed-features
virtiofsd: Remove source
virtiofsd: Remove build and docs glue
virtiofsd: Remove test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rmove the avocado test for virtiofsd, since we're about to remove
the C implementation.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows the test to be skipped when TCG is not present in the QEMU
binary.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a test was tagged with the "accel" tag and the specified
accelerator it not present in the qemu binary, cancel the test.
We can now write tests without explicit calls to require_accelerator,
just the tag is enough.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The two TCG tests for GICv2 and GICv3 are very heavy weight distros
that take a long time to boot up, especially for an --enable-debug
build. The total code coverage they give is:
Overall coverage rate:
lines......: 11.2% (59584 of 530123 lines)
functions..: 15.0% (7436 of 49443 functions)
branches...: 6.3% (19273 of 303933 branches)
We already get pretty close to that with the machine_aarch64_virt
tests which only does one full boot (~120s vs ~600s) of alpine. We
expand the kernel+initrd boot (~8s) to test both GICs and also add an
RNG device and a block device to generate a few IRQs and exercise the
storage layer. With that we get to a coverage of:
Overall coverage rate:
lines......: 11.0% (58121 of 530123 lines)
functions..: 14.9% (7343 of 49443 functions)
branches...: 6.0% (18269 of 303933 branches)
which I feel is close enough given the massive time saving. If we want
to target any more sub-systems we can use lighter weight more directed
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use buildroot 2022.11 based images plus some customization :
- Linux version is bumped to 6.0.9 and kernel is built with a custom
config similar to what OpenBMC provides.
- U-Boot is switched to the one provided by OpenBMC for better support.
- defconfigs includes more target tools for dev.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20230119123449.531826-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Update the test_arm_ast2600_debian test to
- the latest Debian kernel
- use the Rainier machine instead of Tacoma
Both of which contains support for more hardware and thus exercises more
of the hardware Qemu models.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220607011938.1676459-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The M2S-FG484 SOM uses a 16 MiB SPI flash (Spansion
S25FL128SDPBHICO). Since the test asset is bigger,
truncate it to the correct size to avoid when running
the test_arm_emcraft_sf2 test:
qemu-system-arm: device requires 16777216 bytes, block backend provides 67108864 bytes
Add comment regarding the M2S-FG484 SOM hardware in
hw/arm/msf2-som.c.
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
On macOS, private $TMPDIR's are the default. These $TMPDIR's are
generated from a user's unix UID and UUID [1], which can create a
relatively long path:
/var/folders/d7/rz20f6hd709c1ty8f6_6y_z40000gn/T/
QEMU's avocado tests create a temporary directory prefixed by
"avo_qemu_sock_", and create QMP sockets within _that_ as well.
The QMP socket is unnecessarily long, because a temporary directory
is created for every QEMUMachine object.
/avo_qemu_sock_uh3w_dgc/qemu-37331-10bacf110-monitor.sock
The path limit for unix sockets on macOS is 104: [2]
/*
* [XSI] Definitions for UNIX IPC domain.
*/
struct sockaddr_un {
unsigned char sun_len; /* sockaddr len including null */
sa_family_t sun_family; /* [XSI] AF_UNIX */
char sun_path[104]; /* [XSI] path name (gag) */
};
This results in avocado tests failing on macOS because the QMP unix
socket can't be created, because the path is too long:
ERROR| Failed to establish connection: OSError: AF_UNIX path too long
This change resolves by reducing the size of the socket directory prefix
and the suffix on the QMP and console socket names.
The result is paths like this:
pdel@pdel-mbp:/var/folders/d7/rz20f6hd709c1ty8f6_6y_z40000gn/T
$ tree qemu*
qemu_df4evjeq
qemu_jbxel3gy
qemu_ml9s_gg7
qemu_oc7h7f3u
qemu_oqb1yf97
├── 10a004050.con
└── 10a004050.qmp
[1] https://apple.stackexchange.com/questions/353832/why-is-mac-osx-temp-directory-in-weird-path
[2] /Library/Developer/CommandLineTools/SDKs/MacOSX12.3.sdk/usr/include/sys/un.h
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230110082930.42129-2-peter@pjd.dev
Signed-off-by: John Snow <jsnow@redhat.com>
This test is used to do a quick sanity check to ensure that we're able
to run the existing QEMU FW image.
'sifive_u', 'spike' and 'virt' riscv64 machines, and 'sifive_u' and
'virt' 32 bit machines are able to run the default RISCV64_BIOS_BIN |
RISCV32_BIOS_BIN firmware with minimal options.
The riscv32 'spike' machine isn't bootable at this moment, requiring an
OpenSBI fix [1] and QEMU side changes [2]. We could just leave at that
or add a 'skip' test to remind us about it. To work as a reminder that
we have a riscv32 'spike' test that should be enabled as soon as OpenSBI
QEMU rom receives the fix, we're adding a 'skip' test:
(06/18) tests/avocado/riscv_opensbi.py:RiscvOpenSBI.test_riscv32_spike:
SKIP: requires OpenSBI fix to work
[1] https://patchwork.ozlabs.org/project/opensbi/patch/20221226033603.1860569-1-bmeng@tinylab.org/
[2] https://patchwork.ozlabs.org/project/qemu-devel/list/?series=334159
Cc: Cleber Rosa <crosa@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Tested-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
-----BEGIN PGP SIGNATURE-----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=oXX+
-----END PGP SIGNATURE-----
Merge tag 'mips-20230113' of https://github.com/philmd/qemu into staging
MIPS patches queue
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t
# wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww
# qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq
# 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL
# 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0
# v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn
# DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0
# 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A
# WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn
# 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O
# eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y
# w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY=
# =oXX+
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Jan 2023 15:35:28 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'mips-20230113' of https://github.com/philmd/qemu: (46 commits)
scripts/git.orderfile: Display MAINTAINERS changes first
target/mips: Restrict 'qapi-commands-machine.h' to system emulation
hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'
hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header
hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code
hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code
hw/pci-host/bonito: Convert to 3-phase reset
softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818
hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent
hw/core/qdev-properties-system: Allow the 'slew' policy only on x86
hw/intc: Extract the IRQ counting functions into a separate file
hw/intc/i8259: Make using the isa_pic singleton more type-safe
hw/usb/hcd-uhci: Introduce TYPE_ defines for device models
hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific
hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific
hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()
hw/pci/pci_host: Trace config accesses on unexisting functions
mips: Always include nanomips disassembler
mips: Remove support for trap and emulate KVM
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cubieboard now can boot directly from SD card, without the need to pass
`-kernel` parameter. Update Avocado tests to cover this functionality.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20221226220303.14420-8-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
mformat is needed by grub-mkrescue and hence, add this as one of the
dependencies to run bits tests. This avoids errors such as the following:
/var/tmp/acpi-bits-wju6tqoa.tmp/grub-inst-x86_64-efi/bin/grub-mkrescue: 360: mformat: not found
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221203132407.34539-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added the SPDX license identifiers for biosbits tests.
Also added a comment on each of the test scripts to indicate that they run
from within the biosbits environment and hence are not subjected to the regular
maintenance activities for QEMU and is excluded from the dependency management
challenges in the host testing environment.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221125044138.962137-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The old URL wasn't stable. I suspect the current URL will only be
stable for a few months so maybe we need another strategy for hosting
rootfs snapshots?
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221118113309.1057790-1-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qemu-advent-calendar.org server will be decommissioned soon.
I've mirrored the images that we use for the QEMU CI to gitlab,
so update their URLs to point to the new location.
Message-Id: <20221121102436.78635-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
fixes regressions:
virtio error message triggered by seabios
failure in vhost due to VIRTIO_F_RING_RESET
broken keyboard under seabios
some biosbits test fixes
there's still a known regression with migration and vsock,
not fixed yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmN8os4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpw+UH/2JOoxqzkkq4QyV5PzmjsiyyMbrBqFSOTro2
98k9MwxNWHIk6fi3FVIz+LX1EdwDbMl44IHQ88xo7k39V7ThvVvLfjaQySSeoCfE
04++AvkOQ/O8W7sob17r2iPWIHKPIndq8uB652T89o1I/nhmFMsUkdRWmVQ3XsDk
DnPZxjBQnKY0oSvBd7SmSI3C+eA4lF1tht50ZxmOshLx4OSjK/maFVpIyLsUGTMn
6OMxKffDjfvw5z94+pGN1RQm9xu7OwtFZyUnH16xoQUmWSXjzcYXUZ3buTY+eAyJ
I5j9ox27Cqn1wGcypUiTCKLIExEMBfvNY4ovyRa1xvW+MXluVyE=
=bF2U
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,virtio: regression, test fixes
fixes regressions:
virtio error message triggered by seabios
failure in vhost due to VIRTIO_F_RING_RESET
broken keyboard under seabios
some biosbits test fixes
there's still a known regression with migration and vsock,
not fixed yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmN8os4PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpw+UH/2JOoxqzkkq4QyV5PzmjsiyyMbrBqFSOTro2
# 98k9MwxNWHIk6fi3FVIz+LX1EdwDbMl44IHQ88xo7k39V7ThvVvLfjaQySSeoCfE
# 04++AvkOQ/O8W7sob17r2iPWIHKPIndq8uB652T89o1I/nhmFMsUkdRWmVQ3XsDk
# DnPZxjBQnKY0oSvBd7SmSI3C+eA4lF1tht50ZxmOshLx4OSjK/maFVpIyLsUGTMn
# 6OMxKffDjfvw5z94+pGN1RQm9xu7OwtFZyUnH16xoQUmWSXjzcYXUZ3buTY+eAyJ
# I5j9ox27Cqn1wGcypUiTCKLIExEMBfvNY4ovyRa1xvW+MXluVyE=
# =bF2U
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 22 Nov 2022 05:22:06 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
virtio: disable error for out of spec queue-enable
acpi/tests/avocado/bits: keep the work directory when BITS_DEBUG is set in env
tests/avocado: configure acpi-bits to use avocado timeout
MAINTAINERS: add mst to list of biosbits maintainers
tests: acpi: x86: update expected DSDT after moving PRQx fields in _SB scope
acpi: x86: move RPQx field back to _SB scope
tests: acpi: whitelist DSDT before moving PRQx to _SB scope
vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Debugging bits issue often involves running the QEMU command line manually
outside of the avocado environment with the generated ISO. Hence, its
inconvenient if the iso gets cleaned up after the test has finished. This change
makes sure that the work directory is kept after the test finishes if the test
is run with BITS_DEBUG=1 in the environment so that the iso is available for use
with the QEMU command line.
CC: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221117113630.543495-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of using a hardcoded timeout, just rely on Avocado's built-in
test case timeout. This helps avoid timeout issues on machines where 60
seconds is not sufficient.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20221115212759.3095751-1-jsnow@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
We now have a much lighter weight test in machine_aarch64_virt which
tests the full boot chain in less time. Rename the tests while we are
at it to make it clear it is a Fedora cloud image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-11-alex.bennee@linaro.org>
The boot_linux tests download and run a full cloud image boot and
start a full distro. While the ability to test the full boot chain is
worthwhile it is perhaps a little too heavy weight and causes issues
in CI. Fix this by introducing a new alpine linux ISO boot in
machine_aarch64_virt.
This boots a fully loaded -cpu max with all the bells and whistles in
31s on my machine. A full debug build takes around 180s on my machine
so we set a more generous timeout to cover that.
We don't add a test for lesser GIC versions although there is some
coverage for that already in the boot_xen.py tests. If we want to
introduce more comprehensive testing we can do it with a custom kernel
and initrd rather than a full distro boot.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-10-alex.bennee@linaro.org>
On my machine, a debug build of QEMU takes about 260 seconds to
complete this test, so with the current timeout value of 180 seconds
it always times out. Double the timeout value to 360 so the test
definitely has enough time to complete.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221110142901.3832318-1-peter.maydell@linaro.org>
Message-Id: <20221117172532.538149-9-alex.bennee@linaro.org>
The Aspeed SDK images are based on OpenBMC which starts a lot of
services. The output noise on the console can break from time to time
the test waiting for the logging prompt.
Change the U-Boot bootargs variable to add "quiet" to the kernel
command line and reduce the output volume. This also drops the test on
the CPU id which was nice to have but not essential.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221104075347.370503-1-clg@kaod.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221117172532.538149-3-alex.bennee@linaro.org>
The two tests
tests/avocado/boot_linux.py:BootLinuxAarch64.test_virt_tcg_gicv2
tests/avocado/boot_linux.py:BootLinuxAarch64.test_virt_tcg_gicv3
take quite a long time to run, and the current timeout of 240s
is not enough for the tests to complete on slow machines:
we've seen these tests time out in the gitlab CI in the
'avocado-system-alpine' CI job, for instance. The timeout
is also insufficient for running the test with a debug build
of QEMU: on my machine the tests take over 10 minutes to run
in that config.
Push the timeout up to 720s so that the test definitely has
enough time to complete.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Most of the changes are trivial. The bits test timeout has now been increased
to 200 seconds in order to accommodate slower systems and fewer unnecessary
failures. Removed of the reference to non-existent README file in docs. Some
minor corrections in the doc file.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221117053644.516649-1-ani@anisinha.ca>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This introduces QEMU acpi/smbios biosbits avocado test which is run
from within the python virtual environment. When the bits tests are run, bits
binaries are downloaded from an external repo/location, bios bits iso is
regenerated containing the acpi/smbios bits tests that are maintained as a part
of the QEMU source under tests/avocado/acpi-bits/bits-test . When the VM is
spawned with the iso, it runs the tests in batch mode and the results are pushed
out from the VM to the test machine where they are analyzed by this script and
pass/fail results are reported.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221021095108.104843-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change adds initial biosbits config file that instructs biosbits to run
bios test suits in batch mode. Additionally acpi and smbios structures are also
dumped.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PSS tests in acpi test suite seems to be failing in biosbits. This is because
the test is unable to find PSS support in QEMU bios. Let us disable
them for now so that make check does not fail. We can fix the tests and
re-enable them later.
Example failure:
---- ACPI _PSS (Pstate) table conformance tests ----
[assert] _PSS must exist FAIL
\_SB_.CPUS.C000
No _PSS exists
Summary: 1 passed, 1 failed
---- ACPI _PSS (Pstate) runtime tests ----
[assert] _PSS must exist FAIL
\_SB_.CPUS.C000
No _PSS exists
Summary: 0 passed, 1 failed
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-4-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is initial commit of cpuid, acpi and smbios python test scripts for
biosbits to execute. No change has been made to them from the original code
written by the biosbits author Josh Triplett. They are required to be installed
into the bits iso file and then run from within the virtual machine booted off
with biosbits iso.
The test scripts have a ".py2" extension in order to prevent avocado from
loading them. They are written in python 2.7 and are run from within bios bits.
There is no need for avocado to try to load them and call out errors on python3
specific syntaxes.
The original location of these tests are here:
https://github.com/biosbits/bits/blob/master/python/testacpi.pyhttps://github.com/biosbits/bits/blob/master/python/smbios.pyhttps://github.com/biosbits/bits/blob/master/python/testcpuid.py
For QEMU, we maintain a fork of the above repo here with numerious fixes:
https://gitlab.com/qemu-project/biosbits-bits
The acpi test for example is maintained here in the fork:
https://gitlab.com/qemu-project/biosbits-bits/-/raw/master/python/testacpi.py
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Running repeated invocations on a number of test boxes show a fairly
high error rate:
$ retry.py -n 100 -c -- ./tests/venv/bin/avocado run tests/avocado/boot_linux_console.py:BootLinuxConsole.test_sh4_r2d
retry.py called with ['./tests/venv/bin/avocado', 'run', 'tests/avocado/boot_linux_console.py:BootLinuxConsole.test_sh4_r2d']
Results:
Run, Ret, Pass/Fail, Time, Total Pass, Total Run
...
Results summary:
0: 94 times (94.00%), avg time 2.254 (0.00 varience/0.04 deviation)
1: 3 times (3.00%), avg time 1.837 (0.02 varience/0.14 deviation)
8: 3 times (3.00%), avg time 91.288 (0.02 varience/0.15 deviation)
Examining the logs they fall into various categories of un-handled
unaligned access by user space and unexpected FPU usage by the kernel
which ultimately lead to the failure to reach the login prompt. This
could be bugs in the translator that only get hit occasionally or just
a flaky kernel - its hard to tell. To avoid these failures gating CI
lets skip on GitLab.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Magnus Damm <magnus.damm@gmail.com>
Message-Id: <20221027183637.2772968-21-alex.bennee@linaro.org>
The avocado test
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_initrd
finishes with
exec_command(self, 'halt')
# Wait for VM to shut down gracefully
self.vm.wait()
In theory this should be fine. In practice it runs into two bugs:
* when the test calls self.vm.wait() Avocado closes the socket
connection to the guest serial console immediately, so the
avocado logs don't have the last part of the guest output:
https://gitlab.com/qemu-project/qemu/-/issues/1265
* when the socket is closed, a bug in the QEMU socket chardev
means that it loses any data that the guest UART has not
yet consumed. This means that the guest doesn't always read
the full 'halt' command string, so the test intermittently
fails with a timeout:
https://gitlab.com/qemu-project/qemu/-/issues/1264
Work around both of these by waiting for the guest to print the
string that means it has completed the shutdown process. This fixes
a very long standing intermittent failure in this test.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/636
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221020102012.3015662-1-peter.maydell@linaro.org>
Message-Id: <20221027183637.2772968-20-alex.bennee@linaro.org>
These are exercising core QEMU features and don't actually run code.
Not specifying a machine will fail when avocado chooses the native
arch binary to run. Be explicit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-19-alex.bennee@linaro.org>
These are timing out on gitlab.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-7-alex.bennee@linaro.org>
Replace 'buidroot' and 'builroot' by 'buildroot'.
Fixes: f7bc7da072 ("test/avocado/machine_aspeed.py: Add tests using buildroot images")
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220923084803.498337-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some avocado tests fail if QEMU was built without libslirp. Add
require_netdev('user') checks where necessary:
These tests try to ping 10.0.2.2 and expect it to succeed:
boot_linux_console.py:BootLinuxConsole.test_arm_emcraft_sf2
boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_sd
ppc_bamboo.py:BambooMachine.test_ppc_bamboo
These tests run a commandline that includes '-net user':
machine_aspeed.py:AST2x00Machine.test_arm_ast2500_evb_builroot
(and others that use the do_test_arm_aspeed_buidroot_start()
or do_test_arm_aspeed_sdk_start() helper functions)
These changes seem to be sufficient for 'make check-avocado'
to not fail on a --disable-slirp build.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221001195224.2453581-1-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order for hosts running inside of TCG to initialize the kernel's
random number generator, we should support the PRNO_TRNG instruction,
backed in the usual way with the qemu_guest_getrandom helper. This is
confirmed working on Linux 5.19.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220921100729.2942008-2-Jason@zx2c4.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[thuth: turn prno-trng off in avocado test to avoid breaking it]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We should be aiming to keep our tests under 2 minutes so lets reduce
the default timeout to that. Tests that we know take longer should
explicitly set a longer timeout.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-8-alex.bennee@linaro.org>
The SDK tests take a lot longer to run and hence need a longer
timeout. As they run well over the 60 second maximum for CI lets also
disable them for CI as well.
I suspect they also suffer from the inability to detect the login
prompt due to no newlines being processed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-7-alex.bennee@linaro.org>
We don't want to rely on the soon to be reduced default time. These
tests are still slow for something we want to run in CI though.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-6-alex.bennee@linaro.org>
We don't want to rely on the soon to be reduced default time. These
tests are still slow for something we want to run in CI though.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-5-alex.bennee@linaro.org>
We don't want to rely on the soon to be reduced default time. These
tests are still slow for something we want to run in CI though.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-4-alex.bennee@linaro.org>
The assets that this test tries to download have been removed from the
server. Update to a newer version to get it working again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220829080940.110831-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220914155950.804707-3-alex.bennee@linaro.org>
In upstream Avocado, the find_free_port() function is not available
from "network" anymore, but must be used via "ports", see:
https://github.com/avocado-framework/avocado/commit/22fc98c6ff76cc55c48
To be able to update to a newer Avocado version later, let's use
the new way for accessing the find_free_port() function here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220829121939.209329-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The intention was likely to use "intend" instead of "indent" here.
Message-Id: <20220824080926.568935-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some avocado tests blindly assume that QEMU has been compiled with libslirp
enabled and fail badly if it is missing. Add a proper check to cancel the
tests in this case.
Message-Id: <20220824151122.704946-6-thuth@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All of the QEMU tests eventually end up derrived from this class. Move
the default timeout from LinuxTest to ensure we catch them all. We
keep the 15 minute timeout as currently some of the more heavyweight
CFI and TCG tests can overrun. We should aim to drop it down to 2
minutes which is a more reasonable target for tests to aim for but we
want to get this release out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: revert to 15 min timeout for v2]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822165608.2980552-2-alex.bennee@linaro.org>
This is really a limitation of the underlying console code which
doesn't allow us to detect the login: and following "#" prompts
because it reads input line wise. By adding a small delay we ensure
that the login prompt has appeared so we don't accidentally spaff the
shell commands to a confused getty in the guest.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20220811151413.3350684-8-alex.bennee@linaro.org>
On some systems the test can hang. At least defining a timeout stops
it from hanging forever.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220811151413.3350684-7-alex.bennee@linaro.org>
Last line of the test is missing by accident.
This patch fixes the script.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <165943656662.362178.2086588841425038338.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Aspeed SDK kernel usually includes support for the lastest HW
features. This is interesting to exercise QEMU and discover the gaps
in the models.
Add extra I2C tests for the AST2600 EVB machine to check the new
register interface.
Message-Id: <20220707091239.1029561-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
I like to build QEMU from the root source directory [*], rather
than cd'ing into the build directory. This code may as well include
a search path for that, so that you can run avocado tests individually
without specifying "-p qemu_bin=build/qemu-system-arm" manually.
[*] See commit dedad02720 ("configure: add support for pseudo-"in source tree" builds")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220702185604.46643-1-peter@pjd.dev>
[PMD: Mention commit dedad02720]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add an RTC device and check that the output of the hwclock command
matches the current year.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create a named I2C temperature sensor device on the command line,
instantiate device from Linux since it is not part of the device tree,
and check the temperature is correctly reported under sysfs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create a named I2C temperature sensor device on the command line,
instantiate device from Linux since it is not part of the device tree,
and check the temperature is correctly reported under sysfs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It's easier to run. Keep test_arm_ast2600_debian() under the
boot_linux_console.py file because it requires the extract_from_deb()
helper. We could remove it when we have tests for the AST2600.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch adds the "qemu" namespace package to the $build/tests/venv
directory. It does so in "editable" mode, which means that changes to
the source python directory will actively be reflected by the venv.
This patch also then removes any sys.path hacking from the avocado test
scripts directly. By doing this, the environment of where to find these
packages is managed entirely by the virtual environment and not by the
scripts themselves.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220526000921.1581503-7-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds two tests for replaying Linux boot process
on Aarch64 platform.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <165364841373.688121.8868079200312201658.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds two tests for replaying Linux boot process
on x86_64 virtio platform.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <165364840811.688121.11931681195199516354.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch updates replay_linux test to make it compatible with
new LinuxTest class.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <165364840253.688121.10404266209986316381.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add test case to test "ast1030-evb" machine with zephyr os
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-10-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add simple test-case for new display-update qmp command.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220401143936.356460-4-vsementsov@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- make -M virt test exercise -cpu max
- document how binfmt_misc docker works
- clean-up the devel TOC generation
- clean-up check-tcg cross-compile behaviour
- fix byte swap error in xmm gdbstub access
- add float_convd test with reference files
- more reference files for float_convs
- more cleanly handle gdb crashing during check-tcg
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
=8q12
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu into staging
Testing, docs and gdbstub updates:
- make -M virt test exercise -cpu max
- document how binfmt_misc docker works
- clean-up the devel TOC generation
- clean-up check-tcg cross-compile behaviour
- fix byte swap error in xmm gdbstub access
- add float_convd test with reference files
- more reference files for float_convs
- more cleanly handle gdb crashing during check-tcg
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
# KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
# ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
# 4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
# wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
# mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
# QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
# =8q12
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 08:08:59 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu: (25 commits)
tests/guest-debug: better handle gdb crashes
target/i386: fix byte swap issue with XMM register access
tests/tcg: add missing reference files for float_convs
tests/tcg: add float_convd test
tests/tcg: remove duplicate sha512-sse case
tests/tcg: fix non-static build
tests/docker: remove SKIP_DOCKER_BUILD
tests/tcg: isolate from QEMU's config-host.mak
tests/tcg: invoke Makefile.target directly from QEMU's makefile
tests/tcg: list test targets in Makefile.prereqs
tests/tcg: prepare Makefile.prereqs at configure time
tests/tcg: remove CONFIG_USER_ONLY from config-target.mak
tests/tcg: remove CONFIG_LINUX_USER from config-target.mak
tests/tcg: add compiler test variables when using containers
tests/docker: do not duplicate rules for hexagon-cross
tests/docker: simplify docker-TEST@IMAGE targets
tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES)
tests/docker: inline variable definitions or move close to use
tests/docker: remove unnecessary default definitions
tests/docker: remove dead variable
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Fedora 29 kernel is quite old and importantly fails when running
in LPA2 scenarios. As it's not really exercising much of the CPU space
replace it with a custom 5.16.12 kernel with all the architecture
options turned on. There is a minimal buildroot initramfs included in
the kernel which has a few tools for stress testing the memory
subsystem. The userspace also targets the Neoverse N1 processor so
would fail with a v8.0 cpu like cortex-a53.
While we are at it move the test into its own file so it can have an
assigned maintainer.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-2-alex.bennee@linaro.org>
Removes the hard-coded values in setUp(). Class inheriting from
avocado_qemu.LinuxTest can overwrite the default smp and memory instead.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/453
Signed-off-by: Ahmed Abouzied <email@aabouzied.com>
Message-Id: <20210802222257.50946-1-email@aabouzied.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Race conditions can happen with the current code, because the port that
was available might not be anymore by the time the server is started.
By setting the port to 0, PhoneServer it will use the OS default
behavior to get a free port, then we save this information so we can
later configure the guest.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Beraldo Leal <bleal@redhat.com>
Message-Id: <20220311171127.2189534-1-bleal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test times out when running in an IBM POWER host and --disable-tcg.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-10-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
All tests in the file times out when running in an IBM POWER host and
--disable-tcg with an error like the following:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine 40p (...)
Output: qemu-system-ppc: Register sync failed... If you're using
kvm-hv.ko, only "-cpu host" is possible
qemu-system-ppc: kvm_init_vcpu: kvm_arch_init_vcpu failed (0): Invalid argument
Since we don't have a way to detect whether the host is running kvm_hv
or kvm_pr, skip all tests if TCG is not available.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220310183011.110391-9-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This tests times out in an IBM POWER host when compiled with
--disable-tcg.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-8-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This tests times out in an IBM POWER host when compiled with
--disable-tcg.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
All tests of this file, when running in an IBM POWER host and with
--disable-tcg, fail in a similar manner:
Command: ./qemu-system-ppc -display none -vga none (...)
-cpu 7400 (...)
Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument
We don't have a way of telling which KVM module is loaded in a Power
host (kvm_hv or kvm_pr). For now let's make all the tests of this
file depend on TCG support.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Running this test without TCG support in an IBM POWER server results
in the following error:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine ref405ep (...)
Output: qemu-system-ppc: Register sync failed... If you're using
kvm-hv.ko, only "-cpu host" is possible
qemu-system-ppc: kvm_init_vcpu: kvm_arch_init_vcpu failed (0): Invalid argument
Although the host is running kvm_hv we don't have a way of differentiate
between kvm_hv and kvm_pr, meaning that this test would've failed in the
same way if kvm_pr was the KVM module loaded in the host.
Since we don't have a way of checking which KVM module is being loaded
when using avocado, make a TCG accel check in test_ppc_ref405ep().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Running this test gives us a deprecation warning telling that this
machine type is no longer supported:
Output: qemu-system-ppc: Machine type 'taihu' is deprecated:
incomplete, use 'ref405ep' instead
Moreover, this test fails to pass running in an IBM POWER host when
building QEMU with --disable-tcg.
Since the machine type is already being considered deprecated let's not
bother fixing the test with --disable-tcg. Remove test_ppc_taihu().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This test breaks when run in an IBM POWER host with a QEMU compiled
with --disable-tcg and the ppc-softmmu target in a similar manner as
test_ppc_g3beige did.
There's also an observation made about kvm_pr in the error message:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine mac99 (...)
Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument
This means that, when/if we're able to detect kvm_pr support in these
avocado tests, we can revisit this test to not rely solely on TCG
availability.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This test breaks when run in an IBM POWER host with a QEMU compiled
with --disable-tcg and the ppc-softmmu target.
One thing to note is that the error message explictly mentions kvm_pr
support:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine g3beige (...)
Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument
The host was running kvm_hv, not kvm_pr, and the machine failed to load.
Unfortunately we don't have a way to detect whether the KVM module loaded
is kvm_hv or kvm_pr - we do a check for /dev/kvm to detect KVM support but
both modules create this file so that's not helpful.
Let's skip this test for now until we have a way of detecting kvm_pr support in the host.
Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The icount framework relies on TCG availability. If QEMU is built with
--disable-tcg we won't have icount either, and then this test will fail
with the following message in an IBM POWER9 host:
tests/avocado/replay_kernel.py:ReplayKernelNormal.test_ppc64_pseries:
ERROR: ConnectError: Failed to establish session:
(...)
/11-tests_avocado_replay_kernel.py_ReplayKernelNormal.test_ppc64_pseries/replay.bin:
cannot configure icount, TCG support not available
Although this was revealed in a specific ppc64 scenario, the TCG check
is being done in the common code inside run_vm() because all archs need
TCG to have access to icount.
Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220303153517.168943-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some ppc64 hosts (e.g. IBM POWER hosts) aren't able to run the e500
machine using KVM accel. Skip this test if TCG accel isn't available.
Cc: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220303153517.168943-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PowerNV8/9 machines does not work with KVM acceleration, meaning
that boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8/9 tests
will always fail when QEMU is compiled with --disable-tcg:
ERROR 1-tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8
-> VMLaunchFailure: ConnectError: Failed to establish session:
[Errno 104] Connection reset by peer
Exit code: 1
Command: ./qemu-system-ppc64 -display none -vga none -chardev socket,id=mon,path=/var/tmp/avo_qemu_sock_no19zg0m/qemu-1936936-7fffa77cff98-monitor.sock -mon chardev=mon,mode=control -machine powernv8 -chardev socket,id=console,path=/var/tmp/avo_qemu_sock_no19zg0m/qemu-1936936-7fffa77cff98-console.sock,server=on,wait=off -serial chardev:console -kernel /home/danielhb/avocado/data/cache/by_location/4514304e2c4ee84c5f0b5c8bacedda783891df68/zImage.epapr -append console=tty0 console=hvc0 -device pcie-pci-bridge,id=bridge1,bus=pcie.1,addr=0x0 -device nvme,bus=pcie.2,addr=0x0,serial=1234 -device e1000e,bus=bridge1,addr=0x3 -device nec-usb-xhci,bus=bridge1,addr=0x2
Output: qemu-system-ppc64: The powernv machine does not work with KVM acceleration
Let's add the TCG accel requirement in both tests to skip them if we
don't have TCG support available.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220303153517.168943-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Being explicit about the accelerator used on these tests is a good
thing in itself, but it will also be used in the filtering rules
applied on "make check-avocado".
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220225210156.2032055-6-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* Update Haiku VM to a usable level
* Some other miscellaneous small fixes
-----BEGIN PGP SIGNATURE-----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=SY3w
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-03-07' into staging
* Fixes for s390x TCG tests
* Update Haiku VM to a usable level
* Some other miscellaneous small fixes
# gpg: Signature made Mon 07 Mar 2022 18:07:00 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-03-07:
Check and report for incomplete 'global' option format
tests/vm: Update haiku test vm to R1/Beta3
tests/avocado: Cancel BootLinux tests in case there is no free port
MAINTAINERS: Update the files in the FreeBSD section
tests/tcg/s390x: Cleanup of mie3 tests.
tests/tcg/s390x: Fix the exrl-trt* tests with Clang
tests/tcg/s390x: Fix mvc, mvo and pack tests with Clang
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The BootLinux tests are currently failing with an ugly python
stack trace on my RHEL8 system since they cannot get a free port
(likely due to the firewall settings on my system). Let's properly
check the return value of find_free_port() instead and cancel the
test gracefully if it cannot get a free port.
Message-Id: <20220228114325.818294-1-thuth@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG, allow
the feature to be disabled from -cpu max.
Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU's default screen resolution recently changed to 1280x800, so the
resolution in the screen shot header changed of course, too.
Fixes: de72c4b7cd ("edid: set default resolution to 1280x800 (WXGA)")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220221101933.307525-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These tests ensure that our emulation for these cpus is not completely
broken and we can at least run OpenBIOS on them.
$ make check-avocado AVOCADO_TESTS=../tests/avocado/ppc_74xx.py
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220117144757.782441-1-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When we cleaned up argument handling the test was missed.
Fixes: 5ae589faad ("tests/plugins/mem: introduce "track" arg and make args not positional")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211129140932.4115115-4-alex.bennee@linaro.org>
The single use of the 7z binary has been removed in commit a30e114f3
("tests/acceptance: remove Armbian 19.11.3 test for orangepi-pc"),
we don't need to check for this binary availability anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Joaquin de Andres <me@xcancerberox.com.ar>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211106091059.465109-1-philmd@redhat.com>
To run user-mode emulation tests, we introduced the
avocado_qemu.QemuUserTest which inherits from avocado_qemu.QemuBaseTest.
System-mode emulation tests are based on the avocado_qemu.Test class,
which also inherits avocado_qemu.QemuBaseTest. To avoid confusion,
rename it as avocado_qemu.QemuSystemTest.
Suggested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211105143416.148332-7-f4bug@amsat.org>
Move the useful has_cmd()/has_cmds() helpers from the virtiofs
test to the avocado_qemu public class.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211105143416.148332-5-f4bug@amsat.org>
Similarly to the 'System' Test base class with methods for testing
system emulation, the QemuUserTest class contains methods useful to
test user-mode emulation.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211105143416.148332-4-f4bug@amsat.org>
Make pick_default_qemu_bin() generic to find qemu-system or
qemu-user binaries.
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211105143416.148332-3-f4bug@amsat.org>
The Avocado Test::fetch_asset() is handy to download artifacts
before running tests. The current class is named Test but only
tests system emulation. As we want to test user emulation,
refactor the common code as QemuBaseTest.
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211105143416.148332-2-f4bug@amsat.org>
In the discussion about renaming the `tests/acceptance` [1], the
conclusion was that the folders inside `tests` are related to the
framework running the tests and not directly related to the type of
the tests.
This changes the folder to `tests/avocado` and adjusts the MAKEFILE, the
CI related files and the documentation.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-05/msg06553.html
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211105155354.154864-3-willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
