The RX ring descriptors control field is used for setting
SOF and EOF (start of frame and end of frame).
The SOF and EOF weren't cleared from the previous descriptors,
causing inconsistencies in ring buffer.
Fix that by clearing the control field of every descriptors we're
processing.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200418085145.489726-1-rfried.dev@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wraparound of TX descriptor cyclic buffer only updated
the low 32 bits of the descriptor.
Fix that by checking if we're working with 64bit descriptors.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200417171736.441607-1-rfried.dev@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modelled Ethernet MAC of Smartfusion2 SoC.
Micrel KSZ8051 PHY is present on Emcraft's
SOM kit hence same PHY is emulated.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-2-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio_net_device_realize() rejects invalid duplex and speed values.
The error handling is broken:
$ ../qemu/bld-sani/x86_64-softmmu/qemu-system-x86_64 -S -display none -monitor stdio
QEMU 4.2.93 monitor - type 'help' for more information
(qemu) device_add virtio-net,duplex=x
Error: 'duplex' must be 'half' or 'full'
(qemu) c
=================================================================
==15654==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e000014590 at pc 0x560b75c8dc13 bp 0x7fffdf1a6950 sp 0x7fffdf1a6940
READ of size 8 at 0x62e000014590 thread T0
#0 0x560b75c8dc12 in object_dynamic_cast_assert /work/armbru/qemu/qom/object.c:826
#1 0x560b74c38ac0 in virtio_vmstate_change /work/armbru/qemu/hw/virtio/virtio.c:3210
#2 0x560b74d9765e in vm_state_notify /work/armbru/qemu/softmmu/vl.c:1271
#3 0x560b7494ba72 in vm_prepare_start /work/armbru/qemu/cpus.c:2156
#4 0x560b7494bacd in vm_start /work/armbru/qemu/cpus.c:2162
#5 0x560b75a7d890 in qmp_cont /work/armbru/qemu/monitor/qmp-cmds.c:160
#6 0x560b75a8d70a in hmp_cont /work/armbru/qemu/monitor/hmp-cmds.c:1043
#7 0x560b75a799f2 in handle_hmp_command /work/armbru/qemu/monitor/hmp.c:1082
[...]
0x62e000014590 is located 33168 bytes inside of 42288-byte region [0x62e00000c400,0x62e000016930)
freed by thread T1 here:
#0 0x7feadd39491f in __interceptor_free (/lib64/libasan.so.5+0x10d91f)
#1 0x7feadcebcd7c in g_free (/lib64/libglib-2.0.so.0+0x55d7c)
#2 0x560b75c8fd40 in object_unref /work/armbru/qemu/qom/object.c:1128
#3 0x560b7498a625 in memory_region_unref /work/armbru/qemu/memory.c:1762
#4 0x560b74999fa4 in do_address_space_destroy /work/armbru/qemu/memory.c:2788
#5 0x560b762362fc in call_rcu_thread /work/armbru/qemu/util/rcu.c:283
#6 0x560b761c8884 in qemu_thread_start /work/armbru/qemu/util/qemu-thread-posix.c:519
#7 0x7fead9be34bf in start_thread (/lib64/libpthread.so.0+0x84bf)
previously allocated by thread T0 here:
#0 0x7feadd394d18 in __interceptor_malloc (/lib64/libasan.so.5+0x10dd18)
#1 0x7feadcebcc88 in g_malloc (/lib64/libglib-2.0.so.0+0x55c88)
#2 0x560b75c8cf8a in object_new /work/armbru/qemu/qom/object.c:699
#3 0x560b75010ad9 in qdev_device_add /work/armbru/qemu/qdev-monitor.c:654
#4 0x560b750120c2 in qmp_device_add /work/armbru/qemu/qdev-monitor.c:805
#5 0x560b75012c1b in hmp_device_add /work/armbru/qemu/qdev-monitor.c:905
[...]
==15654==ABORTING
Cause: virtio_net_device_realize() neglects to bail out after setting
the error. Fix that.
Fixes: 9473939ed7
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200422130719.28225-9-armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Fixes the following coccinelle warnings:
$ spatch --sp-file --verbose-parsing ... \
scripts/coccinelle/remove_local_err.cocci
...
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329
SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133
SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081
SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529
SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468
SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200412223619.11284-2-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
virtio_net_rsc_ext_num_{packets,dupacks} needs to be available
independently of the presence of VIRTIO_NET_HDR_F_RSC_INFO.
Fixes: 2974e916df ("virtio-net: support RSC v4/v6 tcp traffic for Windows HCK")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200427102415.10915-2-cohuck@redhat.com>
Coverity points out (CID 1421926) that the read code for
REG_ADDR_HIGH reads off the end of the buffer, because it does a
32-bit read from byte 4 of a 6-byte buffer.
The code also has an endianness issue for both REG_ADDR_HIGH and
REG_ADDR_LOW, because it will do the wrong thing on a big-endian
host.
Rewrite the read code to use ldl_le_p() and lduw_le_p() to fix this;
the write code is not incorrect, but for consistency we make it use
stl_le_p() and stw_le_p().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tulip network driver while copying tx/rx buffers does not check
frame size against r/w data length. This may lead to OOB buffer
access. Add check to avoid it.
Limit iterations over descriptors to avoid potential infinite
loop issue in tulip_xmit_list_update.
Reported-by: Li Qiang <pangpei.lq@antfin.com>
Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Reported-by: Jason Wang <jasowang@redhat.com>
Tested-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The CanBusClientInfo::can_receive handler return whether the
device can or can not receive new frames. Make it obvious by
returning a boolean type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The NetCanReceive handler return whether the device can or
can not receive new packets. Make it obvious by returning
a boolean type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We will modify this code in the next commit. Clean it up
first to avoid checkpatch.pl errors.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The smc91c111_can_receive() function simply returns a boolean value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The e1000e_can_receive() function simply returns a boolean value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1737400
Fixed setting max_queue_num if there are no peers in
NICConf. qemu_new_nic() creates NICState with 1 NetClientState(index
0) without peers, set max_queue_num to 0 - It prevents undefined
behavior and possible crashes, especially during pcie hotplug.
Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation")
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The i82596_receive() function attempts to pass the guest a buffer
which is effectively the concatenation of the data it is passed and a
4 byte CRC value. However, rather than implementing this as "write
the data; then write the CRC" it instead bumps the length value of
the data by 4, and writes 4 extra bytes from beyond the end of the
buffer, which it then overwrites with the CRC. It also assumed that
we could always fit all four bytes of the CRC into the final receive
buffer, which might not be true if the CRC needs to be split over two
receive buffers.
Calculate separately how many bytes we need to transfer into the
guest's receive buffer from the source buffer, and how many we need
to transfer from the CRC work.
We add a count 'bufsz' of the number of bytes left in the source
buffer, which we use purely to assert() that we don't overrun.
Spotted by Coverity (CID 1419396) for the specific case when we end
up using a local array as the source buffer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The command is 32-bit, but we are loading the 16 upper bits with
the 'get_uint16(s->scb + 2)' call.
Once shifted by 16, the command bits match the status bits:
- Command
Bit 31 ACK-CX Acknowledges that the CU completed an Action Command.
Bit 30 ACK-FR Acknowledges that the RU received a frame.
Bit 29 ACK-CNA Acknowledges that the Command Unit became not active.
Bit 28 ACK-RNR Acknowledges that the Receive Unit became not ready.
- Status
Bit 15 CX The CU finished executing a command with its I(interrupt) bit set.
Bit 14 FR The RU finished receiving a frame.
Bit 13 CNA The Command Unit left the Active state.
Bit 12 RNR The Receive Unit left the Ready state.
Add the SCB_COMMAND_ACK_MASK definition to simplify the code.
This fixes Coverity 1419392 (CONSTANT_EXPRESSION_RESULT):
/hw/net/i82596.c: 352 in examine_scb()
346 cuc = (command >> 8) & 0x7;
347 ruc = (command >> 4) & 0x7;
348 DBG(printf("MAIN COMMAND %04x cuc %02x ruc %02x\n", command, cuc, ruc));
349 /* and clear the scb command word */
350 set_uint16(s->scb + 2, 0);
351
>>> CID 1419392: (CONSTANT_EXPRESSION_RESULT)
>>> "command & (2147483648UL /* 1UL << 31 */)" is always 0 regardless of the values of its operands. This occurs as the logical operand of "if".
352 if (command & BIT(31)) /* ACK-CX */
353 s->scb_status &= ~SCB_STATUS_CX;
>>> CID 1419392: (CONSTANT_EXPRESSION_RESULT)
>>> "command & (1073741824UL /* 1UL << 30 */)" is always 0 regardless of the values of its operands. This occurs as the logical operand of "if".
354 if (command & BIT(30)) /*ACK-FR */
355 s->scb_status &= ~SCB_STATUS_FR;
>>> CID 1419392: (CONSTANT_EXPRESSION_RESULT)
>>> "command & (536870912UL /* 1UL << 29 */)" is always 0 regardless of the values of its operands. This occurs as the logical operand of "if".
356 if (command & BIT(29)) /*ACK-CNA */
357 s->scb_status &= ~SCB_STATUS_CNA;
>>> CID 1419392: (CONSTANT_EXPRESSION_RESULT)
>>> "command & (268435456UL /* 1UL << 28 */)" is always 0 regardless of the values of its operands. This occurs as the logical operand of "if".
358 if (command & BIT(28)) /*ACK-RNR */
359 s->scb_status &= ~SCB_STATUS_RNR;
Fixes: Covertiy CID 1419392 (commit 376b851909)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJecOZiAAoJEL/70l94x66DgGkH/jpY4IgqlSAAWCgaxfe1n1vg
ahSzSLrC8wiJq2Jxbmxn+5BbH6BxQ9ibflsY5bvCY/sTb7UlOFCPkFhQ2iUgplkw
ciB5UfgCA6OHpKEhpHhXtzlybtNOlxXNWYJ1SrcVXbRES8f7XdhMKs15mnJJuOOE
k/tuZo/44yZRJl0Cv+nkvIFcCVgyu1q0Lln/1MMPngY2r9gt893cY9feTBSSWgnp
+7HZr5TXI7mcIytczFKzbdujlG4391DGejKX66IIxGcWg9vXS7TwAStzH1vSKVfJ
73SKZBoCU5gpHHHC+dqVyouMerV+UE+WQPNtF+LCsNgJBw/2NXc1ZgDrtz1OI2c=
=+LRX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Bugfixes all over the place
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
# gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (62 commits)
hw/arm: Let devices own the MemoryRegion they create
hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias
hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions
hw/arm/stm32: Use memory_region_init_rom() with read-only regions
hw/char: Let devices own the MemoryRegion they create
hw/riscv: Let devices own the MemoryRegion they create
hw/dma: Let devices own the MemoryRegion they create
hw/display: Let devices own the MemoryRegion they create
hw/core: Let devices own the MemoryRegion they create
scripts/cocci: Patch to let devices own their MemoryRegions
scripts/cocci: Patch to remove unnecessary memory_region_set_readonly()
scripts/cocci: Patch to detect potential use of memory_region_init_rom
hw/sparc: Use memory_region_init_rom() with read-only regions
hw/sh4: Use memory_region_init_rom() with read-only regions
hw/riscv: Use memory_region_init_rom() with read-only regions
hw/ppc: Use memory_region_init_rom() with read-only regions
hw/pci-host: Use memory_region_init_rom() with read-only regions
hw/net: Use memory_region_init_rom() with read-only regions
hw/m68k: Use memory_region_init_rom() with read-only regions
hw/display: Use memory_region_init_rom() with read-only regions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The current code causes clang static code analyzer generate warning:
hw/net/imx_fec.c:858:9: warning: Value stored to 'value' is never read
value = value & 0x0000000f;
^ ~~~~~~~~~~~~~~~~~~
hw/net/imx_fec.c:864:9: warning: Value stored to 'value' is never read
value = value & 0x000000fd;
^ ~~~~~~~~~~~~~~~~~~
According to the definition of the function, the two “value” assignments
should be written to registers.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-id: 20200313123242.13236-1-kuhn.chenqun@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Allwinner Sun8i System on Chip family includes an Ethernet MAC (EMAC)
which provides 10M/100M/1000M Ethernet connectivity. This commit
adds support for the Allwinner EMAC from the Sun8i family (H2+, H3, A33, etc),
including emulation for the following functionality:
* DMA transfers
* MII interface
* Transmit CRC calculation
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-10-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Each array consumes 256KiB of .data. As we do not reassign entries,
we can move it to the .rodata section, and save a total of 1MiB of
.data (size reported on x86_64 host).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200305010446.17029-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A portion of a recent patch got lost due to a merge snafu. That patch is
now commit 88f632fbb1 ("dp8393x: Mask EOL bit from descriptor addresses").
This patch restores the portion that got lost.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <alpine.LNX.2.22.394.2003041421280.12@nippy.intranet>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When CADENCE_GEM_ERR_DEBUG is turned on, there are several
compilation errors in DB_PRINT(). Fix them.
While we are here, update to use appropriate modifiers in
the same DB_PRINT() call.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When requested to calculate the hash for TCPV6 packet,
ignore overrides of source and destination addresses
in in extension headers.
Use these overrides when new hash type NetPktRssIpV6TcpEx
requested.
Use this type in e1000e hash calculation for IPv6 TCP, which
should take in account overrides of the addresses.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add support for following hash types:
IPV6 TCP with extension headers
IPV4 UDP
IPV6 UDP
IPV6 UDP with extension headers
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1787142
The emulation issues hw_error if PSRCTL register
is written, for example, with zero value.
Such configuration does not present any problem when
DTYP bits of RCTL register define legacy format of
transfer descriptors. Current commit discards check
for BSIZE0 and BSIZE1 when legacy mode used.
Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Section 3.4.7 of the datasheet explains that,
The RBE bit in the Interrupt Status register is set when the
SONIC finishes using the second to last receive buffer and reads
the last RRA descriptor. Actually, the SONIC is not truly out of
resources, but gives the system an early warning of an impending
out of resources condition.
RBE does not mean actual receive buffer exhaustion, and reception should
not be stopped. This is important because Linux will not check and clear
the RBE interrupt until it receives another packet. But that won't
happen if can_receive returns false. This bug causes the SONIC to become
deaf (until reset).
Fix this with a new flag to indicate actual receive buffer exhaustion.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The jazzsonic driver in Linux uses the Silicon Revision register value
to probe the chip. The driver fails unless the SR register contains 4.
Unfortunately, reading this register in QEMU usually returns 0 because
the s->regs[] array gets wiped after a software reset.
Fixes: bd8f1ebce4 ("net/dp8393x: fix hardware reset")
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jason Wang <jasowang@redhat.com>
These operations need to take place regardless of whether or not
rx descriptors have been used up (that is, EOL flag was observed).
The algorithm is now the same for a packet that was withheld as for
a packet that was not.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When the SONIC receives a packet into the last available descriptor, it
retains ownership of that descriptor for as long as necessary.
Section 3.4.7 of the datasheet says,
When the system appends more descriptors, the SONIC releases ownership
of the descriptor after writing 0000h to the RXpkt.in_use field.
The packet can now be processed by the host, so raise a PKTRX interrupt,
just like the normal case.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The existing code has a bug where the Remaining Buffer Word Count (RBWC)
is calculated with a truncating division, which gives the wrong result
for odd-sized packets.
Section 1.4.1 of the datasheet says,
Once the end of the packet has been reached, the serializer will
fill out the last word (16-bit mode) or long word (32-bit mode)
if the last byte did not end on a word or long word boundary
respectively. The fill byte will be 0FFh.
Implement buffer padding so that buffer limits are correctly enforced.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Section 3.4.1 of the datasheet says,
The alignment of the RRA is confined to either word or long word
boundaries, depending upon the data width mode. In 16-bit mode,
the RRA must be aligned to a word boundary (A0 is always zero)
and in 32-bit mode, the RRA is aligned to a long word boundary
(A0 and A1 are always zero).
This constraint has been implemented for 16-bit mode; implement it
for 32-bit mode too.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A received packet consumes pkt_size bytes in the buffer and the frame
checksum that's appended to it consumes another 4 bytes. The Receive
Buffer Address register takes the former quantity into account but
not the latter. So the next packet written to the buffer overwrites
the frame checksum. Fix this.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a bounds check to prevent a large packet from causing a buffer
overflow. This is defensive programming -- I haven't actually tried
sending an oversized packet or a jumbo ethernet frame.
The SONIC handles packets that are too big for the buffer by raising
the RBAE interrupt and dropping them. Linux uses that interrupt to
count dropped packets.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It doesn't make sense to clear the command register bit unless the
command was actually issued.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Follow the algorithm given in the National Semiconductor DP83932C
datasheet in section 3.4.7:
At the next reception, the SONIC re-reads the last RXpkt.link field,
and updates its CRDA register to point to the next descriptor.
The chip is designed to allow the host to provide a new list of
descriptors in this way.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This function re-uses its 'size' argument as a scratch variable.
Instead, declare a local 'size' variable for that purpose so that the
function result doesn't get messed up.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to the datasheet, section 3.4.4, "in 32-bit mode ... the SONIC
always writes long words".
Therefore, use the same technique for the 'in_use' field that is used
everywhere else, and write the full long word.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The DP83932 and DP83934 have 32 data lines. The datasheet says,
Data Bus: These bidirectional lines are used to transfer data on the
system bus. When the SONIC is a bus master, 16-bit data is transferred
on D15-D0 and 32-bit data is transferred on D31-D0. When the SONIC is
accessed as a slave, register data is driven onto lines D15-D0.
D31-D16 are held TRI-STATE if SONIC is in 16-bit mode. If SONIC is in
32-bit mode, they are driven, but invalid.
Always use 32-bit accesses both as bus master and bus slave.
Force the MSW to zero in bus master mode.
This gets the Linux 'jazzsonic' driver working, and avoids the need for
prior hacks to make the NetBSD 'sn' driver work.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The Least Significant bit of a descriptor address register is used as
an EOL flag. It has to be masked when the register value is to be used
as an actual address for copying memory around. But when the registers
are to be updated the EOL bit should not be masked.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The address_space_rw() function allows either reads or writes
depending on the is_write argument passed to it; this is useful
when the direction of the access is determined programmatically
(as for instance when handling the KVM_EXIT_MMIO exit reason).
Under the hood it just calls either address_space_write() or
address_space_read_full().
We also use it a lot with a constant is_write argument, though,
which has two issues:
* when reading "address_space_rw(..., 1)" this is less
immediately clear to the reader as being a write than
"address_space_write(...)"
* calling address_space_rw() bypasses the optimization
in address_space_read() that fast-paths reads of a
fixed length
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.cocci.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org>
[PMD: Update macvm_set_cr0() reported by Laurent Vivier]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Since its introduction in commit ac1970fbe8, address_space_rw()
takes a boolean 'is_write' argument. Fix the codebase by using
an explicit boolean type.
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Two lines in hw/net/dp8393x.c that Coccinelle produced that
were over 80 characters were re-wrapped by hand.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The NetReceive prototype gets a const buffer:
typedef ssize_t (NetReceive)(NetClientState *, const uint8_t *, size_t);
We already have the address_space_write() method to write a const
buffer to an address space. Use it to avoid:
hw/net/i82596.c: In function ‘i82596_receive’:
hw/net/i82596.c:644:54: error: passing argument 4 of ‘address_space_rw’ discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Fix warnings reported by Clang static code analyzer:
CC hw/net/rocker/rocker.o
hw/net/rocker/rocker.c:213:9: warning: Value stored to 'tx_tso_mss' is never read
tx_tso_mss = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_MSS]);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/net/rocker/rocker.c:217:9: warning: Value stored to 'tx_tso_hdr_len' is never read
tx_tso_hdr_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_HDR_LEN]);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/net/rocker/rocker.c:255:9: warning: Value stored to 'tx_l3_csum_off' is never read
tx_l3_csum_off += tx_tso_mss = tx_tso_hdr_len = 0;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: dc488f888
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200217101637.27558-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
