Other functions from I2C slave API are named "i2c_slave_XXX()".
Follow that pattern with set_address(). Add docstring along.
No logical change.
Patch created mechanically using:
$ sed -i s/i2c_set_slave_address/i2c_slave_set_address/ \
$(git grep -l i2c_set_slave_address)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
We replaced all the i2c_send_recv() calls by the clearer i2c_recv()
and i2c_send(), so we can remove this confusing API.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of using the confuse i2c_send_recv(), replace
i2c_send_recv(send = true) by i2c_send() and
i2c_send_recv(send = false) by i2c_recv().
During the replacement we also change a while() statement by for().
The resulting code is easier to review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Remove the 'is_write' boolean by directly using its value in place.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
To allow further simplifications in the following commits,
start copying WRITE_I2C code to the READ_I2C, and READ_I2C_MOT
to WRITE_I2C_MOT. No logical change.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Since its introduction in commit 6fc7f77fd2 i2c_start_transfer()
uses incorrectly the direction of the transfer (the last argument
is called 'is_recv'). Fix by inverting the argument, we now have
is_recv = !is_write.
Fixes: 6fc7f77fd2 ("introduce aux-bus")
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of using the confuse i2c_send_recv(), rewrite to directly
call i2c_recv() & i2c_send(), resulting in code easier to review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It took me a while to find this model datasheet, since it is
an OCR scan. Add a reference to save other developers time.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of using the confuse i2c_send_recv(), rewrite to directly
call i2c_recv() & i2c_send(), resulting in code easier to review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Define TYPE_LM8323 in the public "hw/input/lm832x.h"
header and use it in hw/arm/nseries.c.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
lm832x_key_event() is specific go LM832x devices, not to the
I2C bus API. Move it out of "i2c.h" to a new header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Lots of this are expected to be coming in, create a directory for them.
Also move the tmp105.h file into the include directory where it
should be.
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
It's an adc, put it where it belongs.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
It's an ADC, put it where it belongs.
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
int128_make64() creates an Int128 from an unsigned 64 bit value; add
a function int128_makes64() creating an Int128 from a signed 64 bit
value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210614151007.4545-34-peter.maydell@linaro.org
Currently the ARM SVE helper code defines locally some utility
functions for swapping 16-bit halfwords within 32-bit or 64-bit
values and for swapping 32-bit words within 64-bit values,
parallel to the byte-swapping bswap16/32/64 functions.
We want these also for the ARM MVE code, and they're potentially
generally useful for other targets, so move them to bitops.h.
(We don't put them in bswap.h with the bswap* functions because
they are implemented in terms of the rotate operations also
defined in bitops.h, and including bitops.h from bswap.h seems
better avoided.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210614151007.4545-17-peter.maydell@linaro.org
For MVE, we want to re-use the large data table from expand_pred_b().
Move the data table to vec_helper.c so it is no longer in an SVE
specific source file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-14-peter.maydell@linaro.org
Add the framework for decoding MVE insns, with the necessary new
files and the meson.build rules, but no actual content yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-11-peter.maydell@linaro.org
Implement the MVE LETP insn. This is like the existing LE loop-end
insn, but it must perform an FPU-enabled check, and on loop-exit it
resets LTPSIZE to 4.
To accommodate the requirement to do something on loop-exit, we drop
the use of condlabel and instead manage both the TB exits manually,
in the same way we already do in trans_WLS().
The other MVE-specific change to the LE insn is that we must raise an
INVSTATE UsageFault insn if LTPSIZE is not 4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-10-peter.maydell@linaro.org
Implement the MVE DLSTP insn; this is like the existing DLS
insn, except that it must do an FPU access check and it
sets LTPSIZE to the value specified in the insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-9-peter.maydell@linaro.org
Implement the MVE WLSTP insn; this is like the existing WLS insn,
except that it specifies a size value which is used to set
FPSCR.LTPSIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-8-peter.maydell@linaro.org
Implement the MVE LCTP instruction.
We put its decode and implementation with the other
low-overhead-branch insns because although it is only present if MVE
is implemented it is logically in the same group as the other LOB
insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-7-peter.maydell@linaro.org
In commit a3494d4671 we reworked the M-profile handling of its
checks for when the NOCP exception should be raised because the FPU
is disabled, so that (in line with the architecture) the NOCP check
is done early over a large range of the encoding space, and takes
precedence over UNDEF exceptions. As part of this, we removed the
code from full_vfp_access_check() which raised an exception there for
M-profile with the FPU disabled, because it was no longer reachable.
For MVE, some instructions which are outside the "coprocessor space"
region of the encoding space must nonetheless do "is the FPU enabled"
checks and possibly raise a NOCP exception. (In particular this
covers the MVE-specific low-overhead branch insns LCTP, DLSTP and
WLSTP.) To support these insns, reinstate the code in
full_vfp_access_check(), so that their trans functions can call
vfp_access_check() and get the correct behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-6-peter.maydell@linaro.org
On A-profile, PSR bits [15:10][26:25] are always the IT state bits.
On M-profile, some of the reserved encodings of the IT state are used
to instead indicate partial progress through instructions that were
interrupted partway through by an exception and can be resumed.
These resumable instructions fall into two categories:
(1) load/store multiple instructions, where these bits are called
"ICI" and specify the register in the ldm/stm list where execution
should resume. (Specifically: LDM, STM, VLDM, VSTM, VLLDM, VLSTM,
CLRM, VSCCLRM.)
(2) MVE instructions subject to beatwise execution, where these bits
are called "ECI" and specify which beats in this and possibly also
the following MVE insn have been executed.
There are also a few insns (LE, LETP, and BKPT) which do not use the
ICI/ECI bits but must leave them alone.
Otherwise, we should raise an INVSTATE UsageFault for any attempt to
execute an insn with non-zero ICI/ECI bits.
So far we have been able to ignore ECI/ICI, because the architecture
allows the IMPDEF choice of "always restart load/store multiple from
the beginning regardless of ICI state", so the only thing we have
been missing is that we don't raise the INVSTATE fault for bad guest
code. However, MVE requires that we honour ECI bits and do not
rexecute beats of an insn that have already been executed.
Add the support in the decoder for handling ECI/ICI:
* identify the ECI/ICI case in the CONDEXEC TB flags
* when a load/store multiple insn succeeds, it updates the ECI/ICI
state (both in DisasContext and in the CPU state), and sets a flag
to say that the ECI/ICI state was handled
* if we find that the insn we just decoded did not handle the
ECI/ICI state, we delete all the code that we just generated for
it and instead emit the code to raise the INVFAULT. This allows
us to avoid having to update every non-MVE non-LDM/STM insn to
make it check for "is ECI/ICI set?".
We continue with our existing IMPDEF choice of not caring about the
ICI state for the load/store multiples and simply restarting them
from the beginning. Because we don't allow interrupts in the middle
of an insn, the only way we would see this state is if the guest set
ICI manually on return from an exception handler, so it's a corner
case which doesn't merit optimisation.
ICI update for LDM/STM is simple -- it always zeroes the state. ECI
update for MVE beatwise insns will be a little more complex, since
the ECI state may include information for the following insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-5-peter.maydell@linaro.org
When MVE is supported, the VPR register has a place on the exception
stack frame in a previously reserved slot just above the FPSCR.
It must also be zeroed in various situations when we invalidate
FPU context.
Update the code which handles the stack frames (exception entry and
exit code, VLLDM, and VLSTM) to save/restore VPR.
Update code which invalidates FP registers (mostly also exception
entry and exit code, but also VSCCLRM and the code in
full_vfp_access_check() that corresponds to the ExecuteFPCheck()
pseudocode) to zero VPR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-4-peter.maydell@linaro.org
MVE has an FPSCR.QC bit similar to the A-profile Neon one; when MVE
is implemented make the bit writeable, both in the generic "load and
store FPSCR" helper functions and in the code for handling the NZCVQC
sysreg which we had previously left as "TODO when we implement MVE".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-3-peter.maydell@linaro.org
Currently we provide Hn and H1_n macros for accessing the correct
data within arrays of vector elements of size 1, 2 and 4, accounting
for host endianness. We don't provide any macros for elements of
size 8 because there the host endianness doesn't matter. However,
this does result in awkwardness where we need to pass empty arguments
to macros, because checkpatch complains about them. The empty
argument is a little confusing for humans to read as well.
Add H8() and H1_8() macros and use them where we were previously
passing empty arguments to macros.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-2-peter.maydell@linaro.org
Message-id: 20210610132505.5827-1-peter.maydell@linaro.org
Adds the pca954x muxes expected.
Tested: Booted quanta-q71l image to userspace.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20210608202522.2677850-4-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds comments to the board init to identify missing i2c devices.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20210608202522.2677850-2-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test was off-by-one, because tag_last points to the
last byte of the tag to check, thus tag_last - prev_page
will equal TARGET_PAGE_SIZE when we use the first byte
of the next page.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/403
Reported-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210612195707.840217-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmDIwqsACgkQda1lgCoL
QhGa9QgAg0Ai+7Low6hBXiHdKi0dYzfCAIrtkcDimXNMfdyzjckOy+QANrAvAnbV
PEJbQfzucdGhbEYRwPTzcEFfN853Z9JItXNcAfOaYBnFTmUayj2t1hz2hONfSvQP
6AQzNTfe7lJoroFfft+On5aLg+veZrSp+YudBn3NMM0AnMnwigvzCiSkHCWkplNf
SAZcWOb9e07tiR2ZUq95VII3o6jBSE2MTXO28X6FIYnABcN7Maz6yxIxflfBVwYI
GkeJ4oWsNrVntowKB9gp7DGi0InaO0SMM3OUd4r68n0+pPHMLuE6xMz+nuBazGP+
ekey0YsnJ0mKCwLFNAo38LPzM+Dcdw==
=LEDV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2021-06-15-1' into staging
Merge tpm 2021/06/15 v1
# gpg: Signature made Tue 15 Jun 2021 16:09:31 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2021-06-15-1:
tpm: Return QMP error when TPM is disabled in build
sysemu: Make TPM structures inaccessible if CONFIG_TPM is not defined
acpi: Eliminate all TPM related code if CONFIG_TPM is not set
arm: Eliminate all TPM related code if CONFIG_TPM is not set
i386: Eliminate all TPM related code if CONFIG_TPM is not set
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit da6d674e50 we split the NVIC code out from the GIC.
This allowed us to specify the NVIC's default value for the num-irq
property (64) in the usual way in its property list, and we deleted
the previous hack where we updated the value in the state struct in
the instance init function. Remove a stale comment about that hack
which we forgot to delete at that time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614161243.14211-1-peter.maydell@linaro.org
Add a comment and i2c method that describes the board layout.
Tested: firmware booted to userspace.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Brandon Kim <brandonkim@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210608193605.2611114-3-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fprintf+assert has been in place since the beginning.
It is after to the fp_access_check, so we need to move the
check up. Fold that in to the pairwise filter.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The default of this switch is truly unreachable.
The switch selector is 3 bits, and all 8 cases are present.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fprintf+assert has been in place since the beginning.
It is prior to the fp_access_check, so we're still good to
raise sigill here.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/381
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 382c7160d1 ("hw/intc/arm_gicv3_cpuif: Fix EOIR write access
check logic") added an assert_not_reached() if the guest writes the EOIR
register while no interrupt is active.
It turns out some software does this: EDK2, in
GicV3ExitBootServicesEvent(), unconditionally write EOIR for all
interrupts that it manages. This now causes QEMU to abort when running
UEFI on a VM with GICv3. Although it is UNPREDICTABLE behavior and EDK2
does need fixing, the punishment seems a little harsh, especially since
icc_eoir_write() already tolerates writes of nonexistent interrupt
numbers. Display a guest error and tolerate spurious EOIR writes.
Fixes: 382c7160d1 ("hw/intc/arm_gicv3_cpuif: Fix EOIR write access check logic")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210604130352.1887560-1-jean-philippe@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the management layer queries a binary built using --disable-tpm
for TPM devices, it gets confused by getting empty responses:
{ "execute": "query-tpm" }
{
"return": [
]
}
{ "execute": "query-tpm-types" }
{
"return": [
]
}
{ "execute": "query-tpm-models" }
{
"return": [
]
}
To make it clearer by returning an error:
- Make the TPM QAPI schema conditional
All of tpm.json is now 'if': 'defined(CONFIG_TPM)'.
- Adapt the HMP command
- Remove stubs which became unnecessary
The management layer now gets a 'CommandNotFound' error:
{ "execute": "query-tpm" }
{
"error": {
"class": "CommandNotFound",
"desc": "The command query-tpm has not been found"
}
}
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: M: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-4-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-3-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-2-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Checking scanout_id in virtio_gpu_do_set_scanout() is too late, for the
"resource_id == 0" case (aka disable scanout) the scanout_id is used
unchecked. Move the check into the callers to fix that.
Fixes: e64d4b6a9b ("virtio-gpu: Refactor virtio_gpu_set_scanout")
Fixes: 32db3c63ae ("virtio-gpu: Add virtio_gpu_set_scanout_blob")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/383
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20210604075029.1201478-1-kraxel@redhat.com>
