Hint: you can use symlinks to create qom_fuse.py in python/qemu/qmp/ and
point to scripts/qom-fuse to apply the standard linting rules to this
script.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Redirect to the new qom scripts. These forwarders can be deleted
eventually when there has been more time for the dust on the Python
packaging to settle and people understand how to find these commands.
Note: You can run these by setting $PYTHONPATH in your shell and then
running "python3 -m qemu.qmp.qom", or you can install the qemu namespace
package and use the "qom" or "qom-set" scripts.
I've written how to install the package elsewhere, but for the sake of
git-blame, cd to ./python, and then do:
- pip3 install [--user] [-e] .
--user will install to your local user install (will not work inside of
a venv), omitting this flag installs to your system-wide packages
(outside of a venv) or to your current virtual environment (inside the
venv).
When installing to a venv or to your system-wide packages, "qom"
should be in your $PATH already. If you do a user install, you may
need to add ~/.local/bin to your $PATH if you haven't already.
-e installs in editable mode: the installed package is effectively just
a symlink to this folder; so changes to your git working tree are
reflected in the installed package.
Note: installing these packages to an environment outside a venv can be
dangerous: Many QEMU scripts will begin to prefer the installed version
instead of the version directly in the tree. Use with caution. editable
mode is recommended when working outside of a venv.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add the 'qom', 'qom-set', 'qom-get', 'qom-list', and 'qom-tree' scripts
to the qemu.qmp package. When you install this package, these scripts
will become available on your command line.
(e.g. when inside of a venv, `cd python && pip install .` will add
'qom', 'qom-set', etc to your $PATH.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Inspired by qom-set, qom-get, qom-tree and qom-list; combine all four of
those scripts into a single script.
A later addition of qom-fuse as an 'extension' necessitates that some
common features are split out and shared between them.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This takes the place of qmp-shell's __get_address function. It also
allows other utilities to share the same parser and syntax for
specifying QMP locations.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In porting the qom tools, qmp-shell, etc; it becomes evident that this
type is wrong.
This is an integer, not a string. We didn't catch this before because
none of QEMUMonitorProtocol's *users* happen to be checked, and the
internal logic of this class is otherwise self-consistent. Additionally,
mypy was not introspecting into the socket() interface to realize we
were passing a bad type for AF_INET. Fixed now.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In a previous commit, I added tox to the development requirements of the
Python library. I never bothered to add them to the Pipfile, because
they aren't needed there. Here, I sync it anyway in its own commit so
that when we add new packages later that the diffstats will not
confusingly appear to pull in lots of extra packages.
Ideally I could tell Pipenv simply not to install these, but it doesn't
seem to support that, exactly. The alternative is removing Tox from the
development requires, which I'd rather not do.
The other alternative is re-specifying all of the dependencies of
setup.cfg in the Pipfile, which I'd also rather not do.
Picking what feels least-worst here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Before commit 7d6948cd98, it was coded to
retrieve the initial output stream format settings, modify the frame
rate, and set again. However, I removed a frame rate modification code by
mistake in the commit. It also assumes the initial output stream format
is consistent with what QEMU expects, but that expectation is not in the
code, which makes it harder to understand and will lead to breakage if
the initial settings change.
This change explicitly sets all of the output stream settings to solve
these problems.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210616141721.54091-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While the SB16 seems to work up to 48000 Hz, the "Sound Blaster Series
Hardware Programming Guide" limit the sampling range from 4000 Hz to
44100 Hz (Section 3-9, 3-10: Digitized Sound I/O Programming, tables
3-2 and 3-3).
Later, section 6-15 (DSP Commands) is more specific regarding the 41h /
42h registers (Set digitized sound output sampling rate):
Valid sampling rates range from 5000 to 45000 Hz inclusive.
There is no comment regarding error handling if the register is filled
with an out-of-range value. (See also section 3-28 "8-bit or 16-bit
Auto-initialize Transfer"). Assume limits are enforced in hardware.
This fixes triggering an assertion in audio_calloc():
#1 abort
#2 audio_bug audio/audio.c:119:9
#3 audio_calloc audio/audio.c:154:9
#4 audio_pcm_sw_alloc_resources_out audio/audio_template.h:116:15
#5 audio_pcm_sw_init_out audio/audio_template.h:175:11
#6 audio_pcm_create_voice_pair_out audio/audio_template.h:410:9
#7 AUD_open_out audio/audio_template.h:503:14
#8 continue_dma8 hw/audio/sb16.c:216:20
#9 dma_cmd8 hw/audio/sb16.c:276:5
#10 command hw/audio/sb16.c:0
#11 dsp_write hw/audio/sb16.c:949:13
#12 portio_write softmmu/ioport.c:205:13
#13 memory_region_write_accessor softmmu/memory.c:491:5
#14 access_with_adjusted_size softmmu/memory.c:552:18
#15 memory_region_dispatch_write softmmu/memory.c:0:13
#16 flatview_write_continue softmmu/physmem.c:2759:23
#17 flatview_write softmmu/physmem.c:2799:14
#18 address_space_write softmmu/physmem.c:2891:18
#19 cpu_outw softmmu/ioport.c:70:5
[*] http://www.baudline.com/solutions/full_duplex/sb16_pci/index.html
OSS-Fuzz Report: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=29174
Fixes: 85571bc741 ("audio merge (malc)")
Buglink: https://bugs.launchpad.net/bugs/1910603
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210616104349.2398060-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently with jackaudio client name and qemu guest name unset,
the JACK client names are out-(NULL) and in-(NULL). These names
are user visible in the patch bay. Replace the function call to
qemu_get_vm_name() with a call to audio_application_name() which
replaces NULL with "qemu" to have more descriptive names.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the code to generate the pa_context_new() application name
argument to a function in audio/audio.c. The new function
audio_application_name() will also be used in the jackaudio
backend.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In current code there are no calls to pa_stream_get_latency()
or pa_stream_get_time() to receive latency or time information.
Remove the flags PA_STREAM_INTERPOLATE_TIMING and
PA_STREAM_AUTO_TIMING_UPDATE which instruct PulseAudio to
calculate this information in regular intervals.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Merge the #ifdef DEBUG code with the if statement a few lines
above to avoid bit rot.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
int128_make64() creates an Int128 from an unsigned 64 bit value; add
a function int128_makes64() creating an Int128 from a signed 64 bit
value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210614151007.4545-34-peter.maydell@linaro.org
Currently the ARM SVE helper code defines locally some utility
functions for swapping 16-bit halfwords within 32-bit or 64-bit
values and for swapping 32-bit words within 64-bit values,
parallel to the byte-swapping bswap16/32/64 functions.
We want these also for the ARM MVE code, and they're potentially
generally useful for other targets, so move them to bitops.h.
(We don't put them in bswap.h with the bswap* functions because
they are implemented in terms of the rotate operations also
defined in bitops.h, and including bitops.h from bswap.h seems
better avoided.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210614151007.4545-17-peter.maydell@linaro.org
For MVE, we want to re-use the large data table from expand_pred_b().
Move the data table to vec_helper.c so it is no longer in an SVE
specific source file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-14-peter.maydell@linaro.org
Add the framework for decoding MVE insns, with the necessary new
files and the meson.build rules, but no actual content yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-11-peter.maydell@linaro.org
Implement the MVE LETP insn. This is like the existing LE loop-end
insn, but it must perform an FPU-enabled check, and on loop-exit it
resets LTPSIZE to 4.
To accommodate the requirement to do something on loop-exit, we drop
the use of condlabel and instead manage both the TB exits manually,
in the same way we already do in trans_WLS().
The other MVE-specific change to the LE insn is that we must raise an
INVSTATE UsageFault insn if LTPSIZE is not 4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-10-peter.maydell@linaro.org
Implement the MVE DLSTP insn; this is like the existing DLS
insn, except that it must do an FPU access check and it
sets LTPSIZE to the value specified in the insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-9-peter.maydell@linaro.org
Implement the MVE WLSTP insn; this is like the existing WLS insn,
except that it specifies a size value which is used to set
FPSCR.LTPSIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-8-peter.maydell@linaro.org
Implement the MVE LCTP instruction.
We put its decode and implementation with the other
low-overhead-branch insns because although it is only present if MVE
is implemented it is logically in the same group as the other LOB
insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-7-peter.maydell@linaro.org
In commit a3494d4671 we reworked the M-profile handling of its
checks for when the NOCP exception should be raised because the FPU
is disabled, so that (in line with the architecture) the NOCP check
is done early over a large range of the encoding space, and takes
precedence over UNDEF exceptions. As part of this, we removed the
code from full_vfp_access_check() which raised an exception there for
M-profile with the FPU disabled, because it was no longer reachable.
For MVE, some instructions which are outside the "coprocessor space"
region of the encoding space must nonetheless do "is the FPU enabled"
checks and possibly raise a NOCP exception. (In particular this
covers the MVE-specific low-overhead branch insns LCTP, DLSTP and
WLSTP.) To support these insns, reinstate the code in
full_vfp_access_check(), so that their trans functions can call
vfp_access_check() and get the correct behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-6-peter.maydell@linaro.org
On A-profile, PSR bits [15:10][26:25] are always the IT state bits.
On M-profile, some of the reserved encodings of the IT state are used
to instead indicate partial progress through instructions that were
interrupted partway through by an exception and can be resumed.
These resumable instructions fall into two categories:
(1) load/store multiple instructions, where these bits are called
"ICI" and specify the register in the ldm/stm list where execution
should resume. (Specifically: LDM, STM, VLDM, VSTM, VLLDM, VLSTM,
CLRM, VSCCLRM.)
(2) MVE instructions subject to beatwise execution, where these bits
are called "ECI" and specify which beats in this and possibly also
the following MVE insn have been executed.
There are also a few insns (LE, LETP, and BKPT) which do not use the
ICI/ECI bits but must leave them alone.
Otherwise, we should raise an INVSTATE UsageFault for any attempt to
execute an insn with non-zero ICI/ECI bits.
So far we have been able to ignore ECI/ICI, because the architecture
allows the IMPDEF choice of "always restart load/store multiple from
the beginning regardless of ICI state", so the only thing we have
been missing is that we don't raise the INVSTATE fault for bad guest
code. However, MVE requires that we honour ECI bits and do not
rexecute beats of an insn that have already been executed.
Add the support in the decoder for handling ECI/ICI:
* identify the ECI/ICI case in the CONDEXEC TB flags
* when a load/store multiple insn succeeds, it updates the ECI/ICI
state (both in DisasContext and in the CPU state), and sets a flag
to say that the ECI/ICI state was handled
* if we find that the insn we just decoded did not handle the
ECI/ICI state, we delete all the code that we just generated for
it and instead emit the code to raise the INVFAULT. This allows
us to avoid having to update every non-MVE non-LDM/STM insn to
make it check for "is ECI/ICI set?".
We continue with our existing IMPDEF choice of not caring about the
ICI state for the load/store multiples and simply restarting them
from the beginning. Because we don't allow interrupts in the middle
of an insn, the only way we would see this state is if the guest set
ICI manually on return from an exception handler, so it's a corner
case which doesn't merit optimisation.
ICI update for LDM/STM is simple -- it always zeroes the state. ECI
update for MVE beatwise insns will be a little more complex, since
the ECI state may include information for the following insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-5-peter.maydell@linaro.org
When MVE is supported, the VPR register has a place on the exception
stack frame in a previously reserved slot just above the FPSCR.
It must also be zeroed in various situations when we invalidate
FPU context.
Update the code which handles the stack frames (exception entry and
exit code, VLLDM, and VLSTM) to save/restore VPR.
Update code which invalidates FP registers (mostly also exception
entry and exit code, but also VSCCLRM and the code in
full_vfp_access_check() that corresponds to the ExecuteFPCheck()
pseudocode) to zero VPR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-4-peter.maydell@linaro.org
MVE has an FPSCR.QC bit similar to the A-profile Neon one; when MVE
is implemented make the bit writeable, both in the generic "load and
store FPSCR" helper functions and in the code for handling the NZCVQC
sysreg which we had previously left as "TODO when we implement MVE".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-3-peter.maydell@linaro.org
Currently we provide Hn and H1_n macros for accessing the correct
data within arrays of vector elements of size 1, 2 and 4, accounting
for host endianness. We don't provide any macros for elements of
size 8 because there the host endianness doesn't matter. However,
this does result in awkwardness where we need to pass empty arguments
to macros, because checkpatch complains about them. The empty
argument is a little confusing for humans to read as well.
Add H8() and H1_8() macros and use them where we were previously
passing empty arguments to macros.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-2-peter.maydell@linaro.org
Message-id: 20210610132505.5827-1-peter.maydell@linaro.org
Adds the pca954x muxes expected.
Tested: Booted quanta-q71l image to userspace.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20210608202522.2677850-4-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds comments to the board init to identify missing i2c devices.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20210608202522.2677850-2-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test was off-by-one, because tag_last points to the
last byte of the tag to check, thus tag_last - prev_page
will equal TARGET_PAGE_SIZE when we use the first byte
of the next page.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/403
Reported-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210612195707.840217-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
_Static_assert is part of C11, which is now required.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210614233143.1221879-9-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All previous users now use C11 _Generic.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210614233143.1221879-8-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is both more and less complicated than our expansion
using __builtin_choose_expr and __builtin_types_compatible_p.
The expansion through QEMU_MAKE_LOCKABLE_ doesn't work because
we're not emumerating all of the types within the same _Generic,
which results in errors about unhandled cases. We must also
handle void* explicitly, so that the NULL constant can be used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210614233143.1221879-7-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will shortly convert lockable.h to _Generic, and we cannot
have two compatible types in the same expansion. Wrap QemuMutex
in a struct, and unwrap in qemu-thread-posix.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210614233143.1221879-6-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create macros for file+line expansion in qemu_rec_mutex_unlock
like we have for qemu_mutex_unlock.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614233143.1221879-5-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declarations from thread-win32.h into thread.h
and remove the macro redirection from thread-posix.h.
This will be required by following cleanups.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210614233143.1221879-4-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210614233143.1221879-3-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the minimum gcc version is 7.5, we can use C11.
This will allow lots of cleanups to the code, currently
hidden behind macros in include/qemu/compiler.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210614233143.1221879-2-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the selective CR0 write intercept is set, all writes to bits in
CR0 other than CR0.TS or CR0.MP cause a VMEXIT.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-5-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The combination of unset CD and set NW bit in CR0 is illegal.
CR0[63:32] are also reserved and need to be zero.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-4-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zero VMRUN intercept and ASID should cause an immediate VMEXIT
during the consistency checks performed by VMRUN.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-3-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added cpu_svm_has_intercept to reduce duplication when checking the
corresponding intercept bit outside of cpu_svm_check_intercept_param
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
_Static_assert is part of C11, which is now required.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210614233143.1221879-9-richard.henderson@linaro.org>
All previous users now use C11 _Generic.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210614233143.1221879-8-richard.henderson@linaro.org>
