Introduce a model of Xilinx Versal's Configuration Frame controller
(CFRAME_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20230831165701.2016397-6-francisco.iglesias@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's Single
Frame Read port (CFU_SFR).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-5-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's data out
port (CFU_FDRO).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-4-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of the software programming interface (CFU_APB) of
Xilinx Versal's Configuration Frame Unit.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-3-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the Xilinx Configuration Frame Interface (CFI) for transmitting
CFI data packets between the Xilinx Configuration Frame Unit models
(CFU_APB, CFU_FDRO and CFU_SFR), the Xilinx CFRAME controller (CFRAME_REG)
and the Xilinx CFRAME broadcast controller (CFRAME_BCAST_REG) models (when
emulating bitstream programming and readback).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20230831165701.2016397-2-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix when using GCC v11.4 (Ubuntu 11.4.0-1ubuntu1~22.04) with CFLAGS=-Og:
[4/6] Compiling C object libcommon.fa.p/hw_intc_arm_gicv3_its.c.o
FAILED: libcommon.fa.p/hw_intc_arm_gicv3_its.c.o
inlined from ‘lookup_vte’ at hw/intc/arm_gicv3_its.c:453:9,
inlined from ‘vmovp_callback’ at hw/intc/arm_gicv3_its.c:1039:14:
hw/intc/arm_gicv3_its.c:347:9: error: ‘vte.rdbase’ may be used uninitialized [-Werror=maybe-uninitialized]
347 | trace_gicv3_its_vte_read(vpeid, vte->valid, vte->vptsize,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
348 | vte->vptaddr, vte->rdbase);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/intc/arm_gicv3_its.c: In function ‘vmovp_callback’:
hw/intc/arm_gicv3_its.c:1036:13: note: ‘vte’ declared here
1036 | VTEntry vte;
| ^~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230831131348.69032-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* debug facility improvements
* timebase and decrementer fixes
* record-replay fixes
* TCG fixes
* XIVE model improvements for multichip
-----BEGIN PGP SIGNATURE-----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=BUg6
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230906' of https://github.com/legoater/qemu into staging
ppc queue :
* debug facility improvements
* timebase and decrementer fixes
* record-replay fixes
* TCG fixes
* XIVE model improvements for multichip
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmT4WKoACgkQUaNDx8/7
# 7KHjOg//bwENCptopnvX5XVTdGLRgBKoMWPkQhWPv4aHYz4t+bxHVWopdMU7i0aL
# hge+ZCCkMKsg2rADczbpWytAvC3vo1Pn4zZhZNQuEvYKIpiWVN6hSflmXWP/bN1I
# AGHlptKvNYKlPfGsmzZ2OZ2yItzrOwKFC/PnPSEc6dxjWfe9hEwzApxaAkOfX8wf
# C+oH8DPvFmh3PH3rI4psCn/xYtxAPW1zosBtgT7Ii1XreABMHLIfIpOmPPh1yF0d
# J7BgBdmxIvsN+syH/vh5jTtU4N/gQVorwyds9MX82Y3j0roxBVVLqH8rFjJA3Jsq
# c/g8WTi1hHiDd8G4m1JcLI1VAhsgh1KhqG9pDaSdQXhP0E4p8N/XjxOR5ro+KxM3
# Dz/Q77VoEKuat+AXg71kc68i11CninhTVSyGnjI80ISWWYvHFQ2Sv8J9U6sS/d0m
# +fo6hed7DDgfXg4OMtedF4HMmc6JAfm9eBzHUoanaoIzX0vX6vetXeMfWh6iceYW
# KNcQuUi3Pvvh/AjE36jusqTkbTleP5Yo4OKNJz4pEP4sU2wQPYU32Lo7Kg7p4WPA
# j+emWmWX4gcn9zTvm2LPYwkdgQ5HgigUJzq9i9qlMqfOOCpRwAsE7V0KxyV0NwDT
# cAAOBCdNm4t94Ni3KEING7xuDzERvJ7H2D6uRQjVsre8cMUO0QE=
# =BUg6
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 06 Sep 2023 06:47:06 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20230906' of https://github.com/legoater/qemu: (35 commits)
ppc/xive: Add support for the PC MMIOs
ppc/xive: Handle END triggers between chips with MMIOs
ppc/xive: Introduce a new XiveRouter end_notify() handler
ppc/xive: Use address_space routines to access the machine RAM
target/ppc: Fix the order of kvm_enable judgment about kvmppc_set_interrupt()
hw/ppc/e500: fix broken snapshot replay
target/ppc: Flush inputs to zero with NJ in ppc_store_vscr
target/ppc: Fix LQ, STQ register-pair order for big-endian
tests/avocado: ppc64 reverse debugging tests for pseries and powernv
tests/avocado: reverse-debugging cope with re-executing breakpoints
tests/avocado: boot ppc64 pseries replay-record test to Linux VFS mount
spapr: Fix record-replay machine reset consuming too many events
spapr: Fix machine reset deadlock from replay-record
target/ppc: Fix timebase reset with record-replay
target/ppc: Fix CPU reservation migration for record-replay
hw/ppc: Read time only once to perform decrementer write
hw/ppc: Reset timebase facilities on machine reset
target/ppc: Migrate DECR SPR
hw/ppc: Always store the decrementer value
target/ppc: Sign-extend large decrementer to 64-bits
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
kvm_pc_setup_irq_routing() is only defined for x86 targets (in
hw/i386/kvm/apic.c). Its declaration is pointless on all
other targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_has_pit_state2() is only defined for x86 targets (in
target/i386/kvm/kvm.c). Its declaration is pointless on
all other targets. Have it return a boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-13-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_enabled() before kvm_hv_vpindex_settable()
to let the compiler elide its call.
kvm-stub.c is now empty, remove it.
Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-9-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_enabled() before kvm_enable_x2apic() to let the compiler elide
its call. Cleanup the code by simplifying "!xen_enabled() &&
kvm_enabled()" to just "kvm_enabled()".
Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-8-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
fw_cfg_build_feature_control() uses CPUID_EXT_VMX which is
defined in "target/i386/cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-4-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both pc_piix.c and pc_q35.c files use CPU_VERSION_LEGACY
which is defined in "target/i386/cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 6f529b7534 ("target/i386: move FERR handling
to target/i386") pc_q35_init() calls tcg_enabled() which
is declared in "sysemu/tcg.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-2-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When encountering an NCQ error, you should not write the NCQ tag to the
SError register. This is completely wrong.
The SError register has a clear definition, where each bit represents a
different error, see PxSERR definition in AHCI 1.3.1.
If we write a random value (like the NCQ tag) in SError, e.g. Linux will
read SError, and will trigger arbitrary error handling depending on the
NCQ tag that happened to be executing.
In case of success, ncq_cb() will call ncq_finish().
In case of error, ncq_cb() will call ncq_err() (which will clear
ncq_tfs->used), and then call ncq_finish(), thus using ncq_tfs->used is
sufficient to tell if finished should get set or not.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230609140844.202795-9-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
When there is an error, we need to raise a TFES error irq, see AHCI 1.3.1,
5.3.13.1 SDB:Entry.
If ERR_STAT is set, we jump to state ERR:FatalTaskfile, which will raise
a TFES IRQ unconditionally, regardless if the I bit is set in the FIS or
not.
Thus, we should never raise a normal IRQ after having sent an error IRQ.
It is valid to signal successfully completed commands as finished in the
same SDB FIS that generates the error IRQ. The important thing is that
commands that did not complete successfully (e.g. commands that were
aborted, do not get the finished bit set).
Before this commit, there was never a TFES IRQ raised on NCQ error.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230609140844.202795-8-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
For NCQ, PxCI is cleared on command queued successfully.
For non-NCQ, PxCI is cleared on command completed successfully.
Successfully means ERR_STAT, BUSY and DRQ are all cleared.
A command that has ERR_STAT set, does not get to clear PxCI.
See AHCI 1.3.1, section 5.3.8, states RegFIS:Entry and RegFIS:ClearCI,
and 5.3.16.5 ERR:FatalTaskfile.
In the case of non-NCQ commands, not clearing PxCI is needed in order
for host software to be able to see which command slot that failed.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-id: 20230609140844.202795-7-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
According to AHCI 1.3.1 definition of PxSACT:
This field is cleared when PxCMD.ST is written from a '1' to a '0' by
software. This field is not cleared by a COMRESET or a software reset.
According to AHCI 1.3.1 definition of PxCI:
This field is also cleared when PxCMD.ST is written from a '1' to a '0'
by software.
Clearing PxCMD.ST is part of the error recovery procedure, see
AHCI 1.3.1, section "6.2 Error Recovery".
If we don't clear PxCI on error recovery, the previous command will
incorrectly still be marked as pending after error recovery.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230609140844.202795-6-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
The AHCI spec states that:
For NCQ, PxCI is cleared on command queued successfully.
For non-NCQ, PxCI is cleared on command completed successfully.
(A non-NCQ command that completes with error does not clear PxCI.)
The current QEMU implementation either clears PxCI in check_cmd(),
or in ahci_cmd_done().
check_cmd() will clear PxCI for a command if handle_cmd() returns 0.
handle_cmd() will return -1 if BUSY or DRQ is set.
The QEMU implementation for NCQ commands will currently not set BUSY
or DRQ, so they will always have PxCI cleared by handle_cmd().
ahci_cmd_done() will never even get called for NCQ commands.
Non-NCQ commands are executed by ide_bus_exec_cmd().
Non-NCQ commands in QEMU are implemented either in a sync or in an async
way.
For non-NCQ commands implemented in a sync way, the command handler will
return true, and when ide_bus_exec_cmd() sees that a command handler
returns true, it will call ide_cmd_done() (which will call
ahci_cmd_done()). For a command implemented in a sync way,
ahci_cmd_done() will do nothing (since busy_slot is not set). Instead,
after ide_bus_exec_cmd() has finished, check_cmd() will clear PxCI for
these commands.
For non-NCQ commands implemented in an async way (using either aiocb or
pio_aiocb), the command handler will return false, ide_bus_exec_cmd()
will not call ide_cmd_done(), instead it is expected that the async
callback function will call ide_cmd_done() once the async command is
done. handle_cmd() will set busy_slot, if and only if BUSY or DRQ is
set, and this is checked _after_ ide_bus_exec_cmd() has returned.
handle_cmd() will return -1, so check_cmd() will not clear PxCI.
When the async callback calls ide_cmd_done() (which will call
ahci_cmd_done()), it will see that busy_slot is set, and
ahci_cmd_done() will clear PxCI.
This seems racy, since busy_slot is set _after_ ide_bus_exec_cmd() has
returned. The callback might come before busy_slot gets set. And it is
quite confusing that ahci_cmd_done() will be called for all non-NCQ
commands when the command is done, but will only clear PxCI in certain
cases, even though it will always write a D2H FIS and raise an IRQ.
Even worse, in the case where ahci_cmd_done() does not clear PxCI, it
still raises an IRQ. Host software might thus read an old PxCI value,
since PxCI is cleared (by check_cmd()) after the IRQ has been raised.
Try to simplify this by always setting busy_slot for non-NCQ commands,
such that ahci_cmd_done() will always be responsible for clearing PxCI
for non-NCQ commands.
For NCQ commands, clear PxCI when we receive the D2H FIS, but before
raising the IRQ, see AHCI 1.3.1, section 5.3.8, states RegFIS:Entry and
RegFIS:ClearCI.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-id: 20230609140844.202795-5-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
The way that BUSY + PxCI is cleared for NCQ (FPDMA QUEUED) commands is
described in SATA 3.5a Gold:
11.15 FPDMA QUEUED command protocol
DFPDMAQ2: ClearInterfaceBsy
"Transmit Register Device to Host FIS with the BSY bit cleared to zero
and the DRQ bit cleared to zero and Interrupt bit cleared to zero to
mark interface ready for the next command."
PxCI is currently cleared by handle_cmd(), but we don't write the D2H
FIS to the FIS Receive Area that actually caused PxCI to be cleared.
Similar to how ahci_pio_transfer() calls ahci_write_fis_pio() with an
additional parameter to write a PIO Setup FIS without raising an IRQ,
add a parameter to ahci_write_fis_d2h() so that ahci_write_fis_d2h()
also can write the FIS to the FIS Receive Area without raising an IRQ.
Change process_ncq_command() to call ahci_write_fis_d2h() without
raising an IRQ (similar to ahci_pio_transfer()), such that the FIS
Receive Area is in sync with the PxTFD shadow register.
E.g. Linux reads status and error fields from the FIS Receive Area
directly, so it is wise to keep the FIS Receive Area and the PxTFD
shadow register in sync.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-id: 20230609140844.202795-4-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
Currently, the first time sending an unsupported command
(e.g. READ LOG DMA EXT) will not have ERR_STAT set in the completion.
Sending the unsupported command again, will correctly have ERR_STAT set.
When ide_cmd_permitted() returns false, it calls ide_abort_command().
ide_abort_command() first calls ide_transfer_stop(), which will call
ide_transfer_halt() and ide_cmd_done(), after that ide_abort_command()
sets ERR_STAT in status.
ide_cmd_done() for AHCI will call ahci_write_fis_d2h() which writes the
current status in the FIS, and raises an IRQ. (The status here will not
have ERR_STAT set!).
Thus, we cannot call ide_transfer_stop() before setting ERR_STAT, as
ide_transfer_stop() will result in the FIS being written and an IRQ
being raised.
The reason why it works the second time, is that ERR_STAT will still
be set from the previous command, so when writing the FIS, the
completion will correctly have ERR_STAT set.
Set ERR_STAT before writing the FIS (calling cmd_done), so that we will
raise an error IRQ correctly when receiving an unsupported command.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230609140844.202795-3-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
* Fixes for the Aspeed I2C model
* New SDK image for avocado tests
* blockdev support for flash device definition
* SD refactoring preparing ground for eMMC support
-----BEGIN PGP SIGNATURE-----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=ymmX
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230901' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fixes for the Aspeed I2C model
* New SDK image for avocado tests
* blockdev support for flash device definition
* SD refactoring preparing ground for eMMC support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmTxsaQACgkQUaNDx8/7
# 7KGXmg//XJNisscl/VWSBaGmH5MbQUAg/QCRalXx1V/lJ8rhE/JqwnWKuoPFd4EN
# iDlh3ufpzxPhHFc9boechuM5ytlrJxpLJoCIJ4sw/4qnO3Dy3Q6BCy1t8Ma62D1u
# oE7cAMHsriJ1uTJNHUTFo72VapTaH2XwFN9lFDuQW45d+WWAXtVJsqvRgFETNmw6
# YYnTTpH2gLTZZFEgOixhWpGLh4Ibc/l8U1VzL0ctQmC11xng0bqk3PAqU9NGzcM5
# MJmEGAxg43CnFu9NJI1nMqC/coi/8PFtrM7HprSwE3H8Jkwncs4ePVT+kZQC+VNQ
# 7EaVkksfEGHlN8XP5+eQDrQ5yT6ve+fbHTLQhwULfeyt0GlQ8h1yewvHCDWo/zw3
# XI1ZyOcNZ2yiaenSUrTPzu0LiqZEJQnzRjPCpgTi1fU08ryEMEaPtr176YDLCguQ
# cpRj4QSZHCrGl/Eo9NlkFP/2rQDKTvCcedKPkYLQtsurSiH/36Oj9YvZycNtZ574
# ortKAtru4YV/rglNX4L8JDhdI+nqvy1liifpJsiS/2KBZDpVFaP8PzGIV40HNy3G
# 8/LVTnaggZaScF3ftHhkg84uQumELS9l2dhsNCL9HqdlrNXLQrVAIR6iuQlpOKBa
# 5S/6h7ZXGOb1qNVQjYp4HCrB7X1KIJYksZ3GdUREf8ot5Ds1FhE=
# =ymmX
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Sep 2023 05:40:52 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230901' of https://github.com/legoater/qemu: (26 commits)
hw/sd: Introduce a "sd-card" SPI variant model
hw/sd: Add sd_cmd_SET_BLOCK_COUNT() handler
hw/sd: Add sd_cmd_SEND_TUNING_BLOCK() handler
hw/sd: Add sd_cmd_SEND_RELATIVE_ADDR() handler
hw/sd: Add sd_cmd_ALL_SEND_CID() handler
hw/sd: Add sd_cmd_SEND_OP_CMD() handler
hw/sd: Add sd_cmd_GO_IDLE_STATE() handler
hw/sd: Add sd_cmd_unimplemented() handler
hw/sd: Add sd_cmd_illegal() handler
hw/sd: Introduce sd_cmd_handler type
hw/sd: Move proto_name to SDProto structure
hw/sd: When card is in wrong state, log which spec version is used
hw/sd: When card is in wrong state, log which state it is
hw/sd/sdcard: Return ILLEGAL for CMD19/CMD23 prior SD spec v3.01
aspeed: Get the BlockBackend of FMC0 from the flash device
m25p80: Introduce an helper to retrieve the BlockBackend of a device
aspeed: Create flash devices only when defaults are enabled
hw/ssi: Check for duplicate CS indexes
aspeed/smc: Wire CS lines at reset
hw/ssi: Introduce a ssi_get_cs() helper
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The XIVE interrupt contoller maintains various fields on interrupt
targets in a structure called NVT. Each unit has a NVT cache, backed
by RAM.
When the NVT structure is not local (in RAM) to the chip, the XIVE
interrupt controller forwards the memory operation to the owning chip
using the PC MMIO region configured for this purpose. QEMU does not
need to be so precise since software shouldn't perform any of these
operations. The model implementation is simplified to return the RAM
address of the NVT structure which is then used by pnv_xive_vst_write
or read to perform the operation in RAM.
Remove the last use of pnv_xive_get_remote().
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The notify page of the interrupt controller can either be used to
receive trigger events from the HW controllers (PHB, PSI) or to
reroute interrupts between Interrupt Controllers. In which case, the
VSD table is used to determine the address of the notify page of the
remote IC and the store data is forwarded.
Today, our model grabs the remote VSD (EAS, END, NVT) address using
pnv_xive_get_remote() helper. Be more precise and implement remote END
triggers using a store on the remote IC notify page.
We still have a shortcut in the model for the NVT accesses which we
will address later.
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It will help us model the END triggers on the PowerNV machine, which
can be rerouted to another interrupt controller.
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
to log an error in case of bad configuration of the XIVE tables by the FW.
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It's unnecessary for non-KVM accelerators(TCG, for example),
to call this function, so change the order of kvm_enable() judgment.
The static inline function that returns -1 directly does not work
in TCG's situation.
Signed-off-by: jianchunfu <chunfu.jian@shingroup.cn>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ppce500_reset_device_tree is registered for system reset, but after
c4b075318e this function rerandomizes rng-seed via
qemu_guest_getrandom_nofail. And when loading a snapshot, it tries to read
EVENT_RANDOM that doesn't exist, so we have an error:
qemu-system-ppc: Missing random event in the replay log
To fix this, use qemu_register_reset_nosnapshotload instead of
qemu_register_reset.
Reported-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Fixes: c4b075318e ("hw/ppc: pass random seed to fdt ")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1634
Signed-off-by: Maksim Kostin <maksim.kostin@ispras.ru>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
spapr_machine_reset gets a random number to populate the device-tree
rng seed with. When loading a snapshot for record-replay, the machine
is reset again, and that tries to consume the random event record
again, crashing due to inconsistent record
Fix this by saving the seed to populate the device tree with, and
skipping the rng on snapshot load.
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When the machine is reset to load a new snapshot while being debugged
with replay-record, it is done from another thread, so the CPU does
not run the register setting operations. Set CPU registers directly in
machine reset.
Cc: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Timebase save uses a random number for a legacy vmstate field, which
makes rr snapshot loading unbalanced. The easiest way to deal with this
is just to skip the rng if record-replay is active.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reading the time more than once to perform an operation always increases
complexity and fragility due to introduced deltas. Simplify the
decrementer write by reading the clock once for the operation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Lower interrupts, delete timers, and set time facility registers
back to initial state on machine reset.
This is not so important for record-replay since timebase and
decrementer are migrated, but it gives a cleaner reset state.
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch.pl fixes ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When writing a value to the decrementer that raises an exception, the
irq is raised, but the value is not stored so the store doesn't appear
to have changed the register when it is read again.
Always store the write value to the register.
Fixes: e81a982aa5 ("PPC: Clean up DECR implementation")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When storing a large decrementer value with the most significant
implemented bit set, it is to be treated as a negative and sign
extended.
This isn't hit for book3s DEC because of another bug, fixing it
in the next patch exposes this one and can cause additional
problems, so fix this first. It can be hit with HDECR and other
edge triggered types.
Fixes: a8dafa5251 ("target/ppc: Implement large decrementer support for TCG")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: removed extra cpu and pcc variables shadowing local variables ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The decrementer register contains a relative time in timebase units.
When writing to DECR this is converted and stored as an absolute value
in nanosecond units, reading DECR converts back to relative timebase.
The tb<->ns conversion of the relative part can cause rounding such that
a value writen to the decrementer can read back a different, with time
held constant. This is a particular problem for a deterministic icount
and record-replay trace.
Fix this by storing the absolute value in timebase units rather than
nanoseconds. The math before:
store: decr_next = now_ns + decr * ns_per_sec / tb_per_sec
load: decr = (decr_next - now_ns) * tb_per_sec / ns_per_sec
load(store): decr = decr * ns_per_sec / tb_per_sec * tb_per_sec /
ns_per_sec
After:
store: decr_next = now_ns * tb_per_sec / ns_per_sec + decr
load: decr = decr_next - now_ns * tb_per_sec / ns_per_sec
load(store): decr = decr
Fixes: 9fddaa0c0c ("PowerPC merge: real time TB and decrementer - faster and simpler exception handling (Jocelyn Mayer)")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The rule of timers is typically that they should never expire before the
timeout, but some time afterward. Rounding timer intervals up when doing
conversion is the right thing to do.
Under most circumstances it is impossible observe the decrementer
interrupt before the dec register has triggered. However with icount
timing, problems can arise. For example setting DEC to 0 can schedule
the timer for now, causing it to fire before any more instructions
have been executed and DEC is still 0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These calculations are repeated several times, and they will become
a little more complicated with subsequent changes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Failing to reset the of_instance_last makes ihandle allocation continue
to increase, which causes record-replay replay fail to match the
recorded trace.
Not resetting claimed_base makes VOF eventually run out of memory after
some resets.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Fixes: fc8c745d50 ("spapr: Implement Open Firmware client interface")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Wire up the H_SET_MODE debug resources to the CIABR and DAWR0 debug
facilities in TCG.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
and replace the SDState::spi attribute with a test checking the
SDProto array of commands.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-11-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-10-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-8-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
