Instead of checking e.g. the first access on every touched page, we should
check the actual access, otherwise we might get false positives when Low
Address Protection (LAP) is active. As probe_write() can only deal with
accesses to one page, we have to loop.
Use i64 for the length, although not needed - easier to reuse
TCG temps we already have in the translation functions where this will
be used. Also allow it to be used from other helpers.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-28-david@redhat.com>
[CH: add missing page_check_range()]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Load both elements signed and store them into the two 64 bit elements.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-27-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Provide an implementation based on i64 and on real host vectors.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-26-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Similar to VECTOR GATHER ELEMENT, but the other direction.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-25-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Like VECTOR REPLICATE, but the element to be replicated comes from an
immediate.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-24-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replicate via the special gvec helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-23-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Read the whole input before modifying the destination vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-22-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Take care of overlying inputs and outputs by using a temporary vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-21-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a big one. Luckily we only have a limited set of such nasty
instructions.
We'll implement all variants with helpers, except when sources and
the destination don't overlap for VECTOR PACK. Provide different helpers
when the cc is to be modified. We'll return the cc then via env->cc_op.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-20-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We cannot use gvec expansion as source and destination elements are
have different element numbers. So we'll expand using a fancy loop.
Also, we have to take care of overlapping source and destination
registers, therefore use a safe evaluation irder depending on the
operation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can reuse the helper introduced along with VECTOR LOAD TO BLOCK
BOUNDARY. We just have to take care of converting the highest index into
a length.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, just load from to gprs into a single vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Very similar to VECTOR LOAD GR FROM VR ELEMENT, just the opposite
direction. Also provide a fast path in case we don't care about the
register content.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Very similar to LOAD COUNT TO BLOCK BOUNDARY, but instead of only
calculating, the actual vector is loaded. Use a temporary vector to
not modify the real vector on exceptions. Initialize that one to zero,
to not leak any data. Provide a fast path if we're loading a full
vector.
As we don't have gvec ool handlers for single vectors, just calculate
the vector address manually.
We can reuse the helper later on for VECTOR LOAD WITH LENGTH. In fact,
we are going to name it "vll" right from the beginning, because that's
a better match.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Try to load the last element first. Access to the first element will
be checked afterwards. This way, we can guarantee that the vector is
not modified before we checked for all possible exceptions. (16 vectors
cannot cross more than two pages)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, zero out the vector before we load the desired element.
Load the element before touching the vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
To avoid an helper, we have to do the actual calculation of the element
address (offset in cpu_env + cpu_env) manually. Factor that out into
get_vec_element_ptr_i64(). The same logic will be reused for "VECTOR
LOAD VR ELEMENT FROM GR".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Take care of properly sign-extending the immediate.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, load with desired size and store it into the right element.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can use tcg_gen_gvec_dup_i64() to carry out the duplication.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When loading from memory, load both elements into temps first before
modifying the target vector
Loading with strange alingment from the end of the address space will
not properly wrap, we can ignore that for now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add gen_gvec_dupi() for handling duplication of immediates, so it can
be reused later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's optimize it for the common cases (setting a vector to zero or all
ones) - courtesy of Richard.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's start with a more involved one, but it is the first in the list
of vector support instructions (introduced with the vector facility).
Good thing is, we need a lot of basic infrastructure for this. Reading
and writing vector elements as well as checking element validity.
All vector instruction related translation functions will reside in
translate_vx.inc.c, to be included in translate.c - similar to how
other architectures handle it.
While at it, directly add some documentation (which contains parts about
things added in follow-up patches, but splitting this up does not make
too much sense). Also add ES_* defines heavily used later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We'll have to read/write vector elements quite frequently from helpers.
The tricky bit is properly taking care of endianess. Handle it similar
to aarch64.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Check them at a central point. We'll use a new instruction flag to
flag all vector instructions (IF_VEC) and handle it very similar to
AFP, whereby we use another unused position in the PSW mask to store
the state of vector register enablement per translation block.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
These are the new instruction formats related to vector instructions as
up to the z14 (a.k.a. latest PoP).
As v2 appeares (like x2 in VRX) with d2/b2 in VRV, we have to assign it a
higher field number to avoid collisions.
Properly take care of the MSB (to be able to address 32 registers) for
each vector register field stored in the RXB field (Bit 36 - 30 for all
vector instructions). As we have 32 bit vector registers and the
"v" fields are only 4 bit in size, the 5th bit is stored in the RXB.
We use a new type to indicate that the MSB has to be fetched from the
RXB.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There are some fields in our struct LowCore which apparently have
been copied from a very old version of the Linux kernel. These
fields are not architected in the "Principles of Operation", and
only used on these memory locations in Linux kernels older than
2.6.29. Newer Linux kernels moved the entries to different locations
or are not using them at all anymore. Thus we should never access
these fields from the QEMU side, so they should be removed.
While we're at it, also add a QEMU_BUILD_BUG_ON() statement to
assert that struct LowCore has the right size.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1551775581-27989-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can eliminate an extra TB in this case, which merely
loads a "return address" into rn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For priv levels 1 & 2, we were doing so from do_ibranch_priv.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the kvm_arm_get_max_vm_ipa_size() helper that returns the
number of bits in the IPA address space supported by KVM.
This capability needs to be known to create the VM with a
specific IPA max size (kvm_type passed along KVM_CREATE_VM ioctl.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-6-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will allow sharing code that adjusts rmode beyond
the existing users.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This decoding more closely matches the ARMv8.4 Table C4-6,
Encoding table for Data Processing - Register Group.
In particular, op2 == 0 is now more than just Add/sub (with carry).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We do not need an out-of-line helper for manipulating bits in pstate.
While changing things, share the implementation of gen_ss_advance.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL0+UMA check is unique to DAIF. While SPSel had avoided the
check by nature of already checking EL >= 1, the other post v8.0
extensions to MSR (imm) allow EL0 and do not require UMA. Avoid
the unconditional write to pc and use raise_exception_ra to unwind.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minimize the number of places that will need updating when
the virtual host extensions are added.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Found by inspection: Rn is the base register against which the
load began; I is the register within the mask being processed.
The exception return should of course be processed from the loaded PC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190301202921.21209-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The floating-point extension facility implemented certain changes to
BFP, HFP and DFP instructions.
As we don't implement HFP/DFP, we can ignore those completely. Related
to BFP, the changes include
- SET BFP ROUNDING MODE (SRNMB) instruction
- BFP-rounding-mode field in the FPC register is changed to 3 bits
- CONVERT FROM LOGICAL instructions
- CONVERT TO LOGICAL instructions
- Changes (rounding mode + XxC) added to
-- CONVERT TO FIXED
-- CONVERT FROM FIXED
-- LOAD FP INTEGER
-- LOAD ROUNDED
-- DIVIDE TO INTEGER
For TCG, we don't implement DIVIDE TO INTEGER, and it is harder to
implement, so skip that. Also, as we don't implement PFPO, we can skip
changes to that as well. The other parts are now implemented, we can
indicate the facility.
z14 PoP mentions that "The floating-point extension facility is installed
in the z/Architecture architectural mode. When bit 37 is one, bit 42 is
also one.", meaning that the DFP (decimal-floating-point) facility also
has to be indicated. We can ignore that for now.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-16-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
"round to nearest with ties away from 0" maps to float_round_ties_away.
"round to prepare for shorter precision" maps to float_round_to_odd.
As all instructions properly check for valid rounding modes in translate.c
we can add an assert. Fix one missing empty line.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With the floating-point extension facility, LOAD ROUNDED has
a rounding mode specification and the inexact-exception control (XxC).
Handle them just like e.g. LOAD FP INTEGER.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With the floating-point extension facility
- CONVERT FROM LOGICAL
- CONVERT TO LOGICAL
- CONVERT TO FIXED
- CONVERT FROM FIXED
- LOAD FP INTEGER
have both, a rounding mode specification and the inexact-exception control
(XxC). Other instructions will be handled separatly.
Check for valid rounding modes and forward also the XxC (via m4). To avoid
a lot of boilerplate code and changes to the helpers, combine both, the
m3 and m4 field in a combined 32 bit TCG variable. Perform checks at
a central place, taking in account if the m3 or m4 field was ignore
before the floating-point extension facility was introduced.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-13-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some instructions allow to suppress IEEE inexact exceptions.
z14 PoP, 9-23, "Suppression of Certain IEEE Exceptions"
IEEE-inexact-exception control (XxC): Bit 1 of
the M4 field is the XxC bit. If XxC is zero, recogni-
tion of IEEE-inexact exception is not suppressed;
if XxC is one, recognition of IEEE-inexact excep-
tion is suppressed.
Especially, handling for overflow/unerflow remains as is, inexact is
reported along
z14 PoP, 9-23, "Suppression of Certain IEEE Exceptions"
For example, the IEEE-inexact-exception control (XxC)
has no effect on the DXC; that is, the DXC for IEEE-
overflow or IEEE-underflow exceptions along with the
detail for exact, inexact and truncated, or inexact and
incremented, is reported according to the actual con-
dition.
Follow up patches will wire it correctly up for the applicable
instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
