Change the code to avoid exiting QEMU if user provided DTB contains
manually specified /psci node and skip any /psci related fixups
instead.
Fixes: 4cbca7d9b4 ("hw/arm: Move virt's PSCI DT fixup code to
arm/boot.c")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Message-id: 20180402205654.14572-1-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
preadv/pwritev accept low and high parts of file offset in two separate
parameters. When host bitness doesn't match guest bitness these parts
must be appropriately recombined.
Introduce target_to_host_low_high that does this recombination and use
it in preadv/pwritev syscalls.
This fixes glibc testsuite test misc/tst-preadvwritev64.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The 2-byte VEX prefix imples a leading 0Fh opcode byte.
Signed-off-by: Eugene Minibaev <mail@kitsu.me>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The list did not author any patches, but it does rewrite the
'From:' header of messages sent from any domain with restrictive
SPF policies that would otherwise prevent the message from reaching
all list recipients. If a maintainer is not careful to undo the
list header rewrite, and the author did not include a manual
'From:' line in the body to fix the munged header, then 'git am'
happily attributes the patch to the list. Add some mailmap
entries to correct the few that have escaped our attention; while
we also work on improving the tooling to catch the problem in
the future before a merge is even made.
Also improve the comments occurring in the file, including line
length improvements.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gcc 8 on rawhide is picky enough to complain:
/home/dummy/qemu/dump.c: In function 'create_header32':
/home/dummy/qemu/dump.c:817:5: error: 'strncpy' output truncated before terminating nul copying 8 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy(dh->signature, KDUMP_SIGNATURE, strlen(KDUMP_SIGNATURE));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
But we already have SIG_LEN defined as the right length without needing
to do a strlen(), and memcpy() is better than strncpy() when we know
we do not want a trailing NUL byte.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixed by commit b3da551 ("fdc: Exit if ISA controller does not support DMA", 2018-03-16).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's write pidfile even if user did not request --daemon but
they requested just --pidfile. Libvirt will use exactly this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After we've dropped privileges it might be not possible to write
pidfile. For instance, if this binary is run as root (because
user wants it to write pidfile to some privileged location)
writing pidfile fails because privileges are dropped before we
even get to that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check device having the feature of VIRTIO_CONSOLE_F_EMERG_WRITE before
get config->emerg_wr. It is neccessary because sizeof(virtio_console_config)
is 8 byte if VirtIOSerial doesn't have the feature of
VIRTIO_CONSOLE_F_EMERG_WRITE(see virtio_serial_device_realize),
read/write emerg_wr will lead to heap-over-flow.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-Id: <20180328133435.20112-1-linzhecheng@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When migrating from a pre-2.9 QEMU, no clock_is_reliable flag is
transferred. We should assume that the source host has an unreliable
KVM_GET_CLOCK, rather than using whatever was determined locally, to
ensure that any drift from the TSC-based value calculated by the guest
is corrected.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Message-Id: <20180406053406.774-1-mike@very.puzzling.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU fails when used with the following command line:
./ppc64-softmmu/qemu-system-ppc64 -S -machine 40p -device i82374
qemu-system-ppc64: hw/isa/isa-bus.c:110: isa_bus_dma: Assertion `!bus->dma[0] && !bus->dma[1]' failed.
The 40p machine type already creates the device i82374. If specified in the
command line, it will try to create it again, hence generating the error. The
function isa_bus_dma() isn't supposed to be called twice for the same bus.
Check the bus doesn't already have a DMA controller registered before creating
the device.
Fixes: https://bugs.launchpad.net/qemu/+bug/1721224
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180326153441.32641-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU SCSI code makes assumptions about how the PROTECT and BYTCHK
works in the protocol, denying support for PI (Protection
Information) in case the guest OS requests it. However, in SCSI versions 2
and older, there is no PI concept in the protocol.
This means that when dealing with such devices:
- there is no PROTECT bit in byte 5 of the standard INQUIRY response. The
whole byte is marked as "Reserved";
- there is no RDPROTECT in byte 2 of READ. We have 'Logical Unit Number'
in this field instead;
- there is no VRPROTECT in byte 2 of VERIFY. We have 'Logical Unit Number'
in this field instead. This also means that the BYTCHK bit in this case
is not related to PI.
Since QEMU does not consider these changes, a SCSI passthrough using
a SCSI-2 device will not work. It will mistake these fields with
PI information and return Illegal Request SCSI SENSE thinking
that the driver is asking for PI support.
This patch fixes it by adding a new attribute called 'scsi_version'
that is read from the standard INQUIRY response of passthrough
devices. This allows for a version verification before applying
conditions related to PI that doesn't apply for older versions.
Reported-by: Dac Nguyen <dacng@us.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Message-Id: <20180327211451.14647-1-danielhb@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to have different behavior for passthrough devices
depending on the SCSI version they expose. To prepare for that,
allow the user of emulated devices to specify the desired SCSI
level, and adjust the emulation according to the property value.
The next patch will set the level for scsi-block and scsi-generic
devices.
Based on a patch by Daniel Henrique Barboza
<danielhb@linux.vnet.ibm.com>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some backends report big max_io_sectors. Making min_io_size the same
value in this case will make it impossible for guest to align memory,
therefore the disk may not be usable at all.
Do not enlarge them when they are zero.
Reported-by: David Gibson <dgibson@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180327164141.19075-1-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We forgot to mention --with-git, --libexecdir and --with-pkgversion
so far.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1522163370-18544-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to guarantee compatibility on migration, QEMU should have
complete control over the features it announces to the guest via CPUID.
However, for a number of Hyper-V-related cpu properties, if the
corresponding feature is not supported by the underlying KVM, the
propery is silently ignored and the feature is not announced to the
guest.
Refuse to start with an error instead.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180330170209.20627-3-rkagan@virtuozzo.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to guarantee compatibility on migration, QEMU should have
complete control over the features it announces to the guest via CPUID.
However, the availability of Hyper-V frequency MSRs
(HV_X64_MSR_TSC_FREQUENCY and HV_X64_MSR_APIC_FREQUENCY) depends solely
on the support for them in the underlying KVM.
Introduce "hv-frequencies" cpu property (off by default) which gives
QEMU full control over whether these MSRs are announced.
While at this, drop the redundant check of the cpu tsc frequency, and
decouple this feature from hv-time.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180330170209.20627-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implements the CPUID trap for CPUID 1 to include the
CPUID_EXT_HYPERVISOR flag in the ECX results. This was preventing some
older linux kernels from booting when trying to access MSR's that dont
make sense when virtualized.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <20180326170658.606-1-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check device having the feature of VIRTIO_CONSOLE_F_EMERG_WRITE before
get config->emerg_wr. It is neccessary because sizeof(virtio_console_config)
is 8 byte if VirtIOSerial doesn't have the feature of
VIRTIO_CONSOLE_F_EMERG_WRITE(see virtio_serial_device_realize),
read/write emerg_wr will lead to heap-over-flow.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
My rework of section adding combines overlapping or adjoining regions,
but checks they're actually the same underlying RAM block.
Fix the case where two blocks adjoin but don't overlap; that new region
should get added (but not combined), but my previous patch was disallowing it.
Fixes: c1ece84e7c
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without a dedicated protocol feature, QEMU cannot know whether
the backend can handle VHOST_USER_SET_CONFIG and
VHOST_USER_GET_CONFIG messages.
This patch adds a protocol feature that is only advertised by
QEMU if the device implements the config ops. Vhost user init
fails if the device support the feature but the backend doesn't.
The backend should only send VHOST_USER_SLAVE_CONFIG_CHANGE_MSG
requests if the protocol feature has been negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
As soon as vhost-user init is done, the backend may send
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG, so let's set the
notification callback before it.
Also, it will be used to know whether the device supports
the config feature to advertize it or not.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
memtohex() adds an extra trailing NUL character.
Reported-by: AddressSanitizer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180408145933.1149-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's simplify it a bit. On some weird circumstances we would have
tried to recompute watchpoints when running under KVM. load_psw() is
called from do_restart_interrupt() during a SIGP RESTART if the target
CPU is STOPPED. Let's touch watchpoints only in the TCG case - where
they are used for PER emulation.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180409113019.14568-3-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we already triggered another exception, don't overwrite it with a
protection exception.
Only applies to old KVM instances without the virtual memory access
IOCTL in KVM.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180409113019.14568-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If the subchannel is already attached or if vfio_get_device() fails, the
code jumps to the 'out_device_err' label and doesn't free the string it
has just allocated.
The code should be reworked so that vcdev->vdev.name only gets set when
the device has been attached, and freed when it is about to be detached.
This could be achieved with the addition of a vfio_ccw_get_device()
function that would be the counterpart of vfio_put_device(). But this is
a more elaborate cleanup that should be done in a follow-up. For now,
let's just add calls to g_free() on the buggy error paths.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152311222681.203086.8874800175539040298.stgit@bahia>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Contains the following commits:
- s390: Do not pass inofficial IPL type to the guest
For s390-netboot.img, this also contains the following commits (update
was forgotten last time):
- pc-bios/s390-ccw: Move string arrays from bootmap header to .c file
- pc-bios/s390-ccw: Increase virtio timeout to 30 seconds
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
IPL over a virtio-scsi device requires special handling not
available in the real architecture. For this purpose the IPL
type 0xFF has been chosen as means of communication between
QEMU and the pc-bios. However, a guest OS could be confused
by seeing an unknown IPL type.
This change sets the IPL parameter type to 0x02 (CCW) to prevent
this. Pre-existing Linux has looked up the IPL parameters only in
the case of FCP IPL. This means that the behavior should stay
the same even if Linux checks for the IPL type unconditionally.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-4-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Operating systems may request an IPL from a virtio-scsi device
by specifying an IPL parameter type of CCW. In this case QEMU
won't set up the IPLB correctly. The BIOS will still detect
it's a SCSI device to boot from, but it will now have to search
for the first LUN and attempt to boot from there.
However this may not be the original boot LUN if there's more than
one SCSI disk attached to the HBA.
With this change QEMU will detect that the request is for a
SCSI device and will rebuild the initial IPL parameter info
if it's the SCSI device used for the first boot. In consequence
the BIOS can use the boot LUN from the IPL information block.
In case a different SCSI device has been set, the BIOS will find
and use the first available LUN.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-3-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Splitting out the the CCW device extraction allows reuse.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-2-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Manually having to use cpu_synchronize_state() is error prone. And as
Christian Borntraeger discovered, e.g. handle_diag() is currently
missing a cpu_synchronize_state(), as decode_basedisp_s() uses a
general purpose register value internally.
So let's do an overall cpu_synchronize_state(), which fixes at least the
one mentioned BUG. We will clean up the superfluous cpu_synchronize_state()
calls later.
We now also call it (although maybe not neded) for
- KVM_EXIT_S390_RESET -> s390_reipl_request()
- KVM_EXIT_DEBUG -> kvm_arch_handle_debug_exit()
- unmanagable/unimplemented intercepts
- ICPT_CPU_STOP -> do_stop_interrupt() -> cpu gets halted
- Scenarios where we inject an operation exception
- handle_stsi()
I don't think any of these are performance critical. Especially as we
have all information directly contained in kvm_run, there are no
additional IOCTLs to issue on modern kernels.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180406093552.13016-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Not needed, kbd_put_qcode_console() will handle that for us.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180321135041.15768-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For both grapical and text consoles.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180321135041.15768-3-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Install optional dependencies of QEMU to get better coverage.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1520942752-19449-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
We don't source common.rc where prep_fail is defined, so spell out the
commands and do what was intended.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180326090350.30014-1-famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The apt-get commands we run through ssh expect certain features of the
tty, and refuses to work if /dev/null is used. It is ugly, but easy to
satisfy.
Actually, there is no reason to hide the output. It just makes things
harder to diagnose. We can always redirect in the Makefile, so don't do
it conditionally here.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180322034753.6301-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180315142713.30960-1-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
