currently there is no way to fully disable any graphic card device for
the PC architecture.
You can have no graphical output, thanks to -nographic, but you would
have the VGA device connected to your PCI bus anyway.
There is already a convenient -vga option to choose between std, cirrus
and vmware; this patch add the new option "none" to select no graphic
card at all.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6322 c046a42c-6fe2-441c-8c8c-71466251a162
After my last patch to fix interrupt coalescing was rejected
on the basis that it is too intrusive we decided to make the
fix much more localized and only fix the problem for RTC time
source. Unfortunately it is impossible to fix the problem entirely
inside RTC code like Andrzej proposed since Windows reads RTC
register C more then once on each time interrupt so it is impossible
to count reliably how many interrupt windows actually handled.
Proposed solution is localized to I386 target and is disabled by
default. To enable it "-rtc-td-hack" flag should be used.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6320 c046a42c-6fe2-441c-8c8c-71466251a162
This adds an intialization of virtio console for powerpc.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6319 c046a42c-6fe2-441c-8c8c-71466251a162
This adds an intialization of virtio console for pc style hardware.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6318 c046a42c-6fe2-441c-8c8c-71466251a162
- Allow date/time to be written
- Use qemu_get_timedate() to initialize the clock
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6313 c046a42c-6fe2-441c-8c8c-71466251a162
CASE_GET_REG32 is already defined in lsi53c895a.c; introduce CASE_GET_REG24.
(Sebastian Herbszt)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6311 c046a42c-6fe2-441c-8c8c-71466251a162
According to mc146818 specification, Day of Week register (#6) is between 1
and 7, 1 representing Sunday. According C specification, tm_wday field in
struct tm is between 0 and 6, 0 representing Sunday.
Bit 2 of register B (#11) is named DM (data mode) and specifies if RTC
stores values in BCD or in binary form.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6310 c046a42c-6fe2-441c-8c8c-71466251a162
The Z85C30 on the PowerMAC machines have one interrupt per serial
channel, while the Sparc machines have only one for both. Allow the
emulated device to use one IRQ per channel.
Patch by Laurent Vivier.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6295 c046a42c-6fe2-441c-8c8c-71466251a162
All PCI NIC init functions return void and nothing uses the
return value from virtio_net_init().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6291 c046a42c-6fe2-441c-8c8c-71466251a162
Add a table of PCI NIC models to pass to qemu_setup_nic_model().
While we're at it, also add a corresponding table of NIC init
functions.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6287 c046a42c-6fe2-441c-8c8c-71466251a162
Some NIC init functions are only called when that model is
the only valid model. In that case, it makes sense to use
qemu_check_nic_model() from the NIC init function itself.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6286 c046a42c-6fe2-441c-8c8c-71466251a162
Swap the two CharDriverState arguments so that the first argument
corresponds to the channel A and the second argument to the channel B.
Modify hw/sun4m.c accordingly.
This fixes the order of the serial ports on the PPC machines.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6284 c046a42c-6fe2-441c-8c8c-71466251a162
It was observed that Windows 2003 x64 hangs when shutting down if an
RTL8139 NIC and a USB device tablet are both present. What seems to be
happening is:
- the guest shuts down the transmitter and receiver
- time passes
- the guest requests a tally counter dump
As it happens, the tally counter command register overlaps the transmit
status register in C mode. Qemu determines whether the chip is in C or C+
mode by looking at the C+ transmit enable bit; as this is now unset, the
dump tally counter command is interpreted as a C mode transmit command. The
guest doesn't think so, however, and continues to poll for completion of the
tally counter dump command. This never occurs, so the guest hangs.
Fix by redefining C+ mode as "a write to the C+ command register has occurred
since the last reset". The data sheet is silent on the matter.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6279 c046a42c-6fe2-441c-8c8c-71466251a162
Replace runtime checks on env->user_mode_only by compile time
checks on CONFIG_USER_ONLY.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6277 c046a42c-6fe2-441c-8c8c-71466251a162
* PHY reports correct link-state.
* Allow the board description to assign separate addresses to each PHY.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6255 c046a42c-6fe2-441c-8c8c-71466251a162
During hardware detection Openserver issues commands to slaves on both primary
and secondary ports. We already return a zero for the status register in this
situation but after reading the status register the Openserver installer
proceeds to check the value of the error register. Currently we return the
existing value in the register. This confuses the installer and it tries to
access the slave units later on. When the command that gets issued later gets
ignored the installer freezes. The patch below returns zero when reading the
error register if a slave unit is selected. Openserver can now successfully be
installed using the emulated IDE hard drive.
Return zero when reading error register with slave selected
Signed-off-by: Justin Chevrier <theburner1@yahoo.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6252 c046a42c-6fe2-441c-8c8c-71466251a162
Implement the VIRTIO_NET_F_STATUS feature by exposing the link status
through virtio_net_config::status.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6250 c046a42c-6fe2-441c-8c8c-71466251a162
On link up or down we set the E1000_STATUS_LU ("link up") bit
in the status register and set the E1000_ICR_LSC ("link
status changed") bit in the interrupt cause register before
interrupting the guest.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6249 c046a42c-6fe2-441c-8c8c-71466251a162
- Use a LFSR to generate the random value
- Make sure to not return the same value twice
Based on a patch by Hervé Poussineau.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6233 c046a42c-6fe2-441c-8c8c-71466251a162
The G3 B&W is a new world machine. The machine currently implemented is
actually closer to a G3 beige.
Also swith the MacIO from Paddigton (new world) to Heathrow (old world).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6228 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6226 c046a42c-6fe2-441c-8c8c-71466251a162
This was spotted by Stefan Weil.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6224 c046a42c-6fe2-441c-8c8c-71466251a162
We are failing to save whether the guest will supply us rx
buffers using the new mergeable format; this can cause a
migrated guest to crash with:
virtio-net header not in first element
Bump the savevm version number and refuse to load v1 saves
just to be on the safe side.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6221 c046a42c-6fe2-441c-8c8c-71466251a162
Allow the user to supply a vlan client name on the command line.
This is probably only useful for management tools so that they can
use their own names rather than parsing the output of 'info network'.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
Factor out a simple little function for formatting a NIC's
info_str and make all NICs use it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6218 c046a42c-6fe2-441c-8c8c-71466251a162
Don't lose track of what type/model a vlan client is so that we can
e.g. assign a global per-model id to clients.
The entire patch is basically a tedious excercise in making sure the
type/model string gets propagated down to qemu_new_vlan_client().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162