I spent way too much time trying to figure out why the emulated NVDIMM
was missing under Linux. In an effort to help others who might be looking
for these kinds of things in the future, include a hint.
Signed-off-by: Kees Cook <keescook@chromium.org>
Message-id: 20181018201351.GA25286@beast
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add prefix, suffix, operation descriptions, and other corrections
and amendments to the comment that describes MXU ASE.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move MXU_EN check to the main MXU decoding function, to avoid code
repetition.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S32LDD and S32LDDR MXU instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Adds support for emulating the Q8MUL and Q8MULSU MXU instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the D16MAC MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the D16MUL MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S8LDD MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move MUL, S32M2I, S32I2M handling out of switch. These are all
instructions that do not depend on MXU_EN flag of MXU_CR.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S32I2M and S32M2I MXU instructions.
This commit also contains utility functions for reading/writing
to MXU registers. This is required for overall MXU instruction
support.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add bit encoding for MXU execute 2-bit add/subtract pattern 'eptn2'.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add bit encoding for MXU accumulate add/subtract 1-bit pattern
'aptn1'.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add MXU decoding engine: add handlers for all instruction pools,
and main decode handler. The handlers, for now, for the purpose
of this patch, contain only sceleton in the form of a single
switch statement.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Provide the placeholder and add the invocation logic for MXU
decoding engine.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Amend MXU instruction opcodes. Pool04 is actually only instruction
OPC_MXU_S16MAD. Two cases within S16MAD are recognized by 1-bit
subfield 'aptn1'.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Define a bit for MXU in insn_flags. This is the first non-MIPS
(third party) ASE supported in QEMU for MIPS, so it is placed in
the section "bits 56-63: vendor-specific ASEs".
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Define and initialize the 16 MXU registers - 15 general computational
register, and 1 control register). There is also a zero register, but
it does not have any corresponding variable.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Coverity found two fallthroughs that miss break statement. Fix them.
Revieved-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
According to qdev-properties.h, properties of pointer type should
be avoided, it seems a link type property is a good substitution.
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181022074050.19638-3-maozhongyi@cmss.chinamobile.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
See qemu_spice_add_display_interface(), the console index is also used
as channel id. So put that into the qxl->id field too.
In typical use cases (one primary qxl-vga device, optionally one or more
secondary qxl devices, no non-qxl display devices) this doesn't change
anything.
With this in place the qxl->id can not be used any more to figure
whenever a given device is primary (with vga compat mode) or secondary.
So add a bool to track this.
Cc: spice-devel@lists.freedesktop.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181012114540.27829-1-kraxel@redhat.com
This can avoid setting OCHIState.num_ports to a negative num.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Message-id: 1540263618-18344-1-git-send-email-liq3ea@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
One fix for mingw build and some improvements in VM based testing, many thanks
to Paolo and Phil.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEUAN8t5cGD3bwIa1WyjViTGqRccYFAlvTIXEQHGZhbXpAcmVk
aGF0LmNvbQAKCRDKNWJMapFxxlRqB/99FX5texTlvPy2yH8jC6eXWt1XzcqVc9Ei
TPHJ3LLR7EqjTBD/NCgvRzed4D0U2uRm8rXssujJPUnqt9hmlpNPzIEqLeV650hB
QBWWC8rrxzPMGKbQzBE0b/bbAaXW4KFsBXicmrTJz6MCN12S4yGwMJg3B7yAeXtp
2cVjhmoXiynx7qsWjKl8+hvSmCSMYvsfNygHGbFaLdr/CB8+ug/5fRg2yrhWz68U
emcjljgHRiZpKy8Kn0F0lKTPqKCYi0EVxoDk424c2Ag+oGZsxvhJMolPooOWVXCX
8bfmzyRR2aPi9m8bfp42+yqYYopD/ncr2zF65+6OYtTA2GfxiywG
=wIx1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/testing-pull-request' into staging
Testing patches
One fix for mingw build and some improvements in VM based testing, many thanks
to Paolo and Phil.
# gpg: Signature made Fri 26 Oct 2018 15:15:13 BST
# gpg: using RSA key CA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/testing-pull-request:
tests/vm: Do not abuse parallelism when HOST != TARGET architecture
tests/vm: Do not use -enable-kvm if HOST != TARGET architecture
tests/vm: Let kvm_available() work in cross environments
tests/vm: Add a BaseVM::arch property
tests/vm: Display remaining seconds to wait for a VM to start
tests/vm: Do not use the -smp option with a single cpu
tests/vm: Do not abuse parallelism when KVM is not available
tests/vm: Extract the kvm_available() handy function
tests: docker: update test-mingw for GTK+ 2.0 removal
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb0iQKAAoJENSXKoln91plUngH/icGvr5sa6JbT/4bDP20Wv7y
gwJ8Ax6kKDU4Z/JbBt+2diXVRrPXCF6xt/dvcaWCnxKyjIZN0i2azHv75jtMEA5t
+khdqqREzTZ8RiEI+u0r+OkSNJ3837O+ahQFdRxjqSDIScC8mcwW8h1md9ThjzbQ
yBhRvNo8QkXGGx9MCWZ7kUGkPnJDQnL0jGiFj0xhtyDSGXfnnOpUgpQKRWu5cQzl
Q7JKFPQgt676kd6UyG7f+xYw/a6uERmMBWp30CfN6bP4bPcdFHdUlgIM60VRAfhA
qYA4led5sWcuqmA96PoZIOc+05/8Q8NkgP+nYbXeMkW8/9QOCPa/30p7QayOpZA=
=F4up
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-3' into staging
MIPS queue for October 2018 - part 3
# gpg: Signature made Thu 25 Oct 2018 21:14:02 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-3:
target/mips: Add disassembler support for nanoMIPS
target/mips: Implement emulation of nanoMIPS EVA instructions
target/mips: Add nanoMIPS CRC32 instruction pool
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TYPE_XEN_PT_DEVICE is a subclass of TYPE_PCI_DEVICE, the clean way
to access the PCIDevice pointer is using the PCI_DEVICE() macro.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20180705155811.20366-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is needed for builds with the mingw64-* packages from Cygwin,
but also works for Linux.
Move the zlib test also more to the end because users should
get information on the really important missing packages
(which also require zlib) first.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180712192603.11599-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix also a grammar issue.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180713054755.23323-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Found by reading the code.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1536150548-2797-1-git-send-email-liq3ea@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 990dc39c made all tests executable at the time, but 218 came in
later, and missing those permissions.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181004161852.11673-4-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The line immediate following a ".. code::" block is considered
to contains arguments to the "code directive". The lack of a
new line gives me during at parse time:
testing.rst:63: (ERROR/3) Error in "code" directive:
maximum 1 argument(s) allowed, 3 supplied.
.. code::
make check-unit V=1
testing.rst:120: (ERROR/3) Error in "code" directive:
maximum 1 argument(s) allowed, 3 supplied.
.. code::
make check-qtest V=1
Let's add the missing newlines, both for consistency and to
avoid the parsing errors.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20181004161852.11673-6-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit cce293a294 moved some functions from common.config to
common.rc, but the error messages still reference the old file
location.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181004161852.11673-5-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Point to the right and obvious location for lm32 tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181004161852.11673-3-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
