bdrv_replace_child_noperm tries to hand over the quiesce_counter state
from old bs to the new one, but if they are not on the same aio context
this causes unbalance.
Fix this by setting the correct aio context before calling
bdrv_append().
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The assertion is currently failing. We can't require callers to have
write permissions when all they are doing is a read, so comment it out.
Add a FIXME comment in the code so that the check is re-enabled when
copy on read is refactored into its own filter driver.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
The documentation and help for qemu-img claims that 'qemu-img create'
will take the '--image-opts' argument. This is not true, so this
patch removes those claims.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If @bs does not have any parents, the only reference to @mirror_top_bs
will be held by the BlockJob object after the bdrv_unref() following
block_job_create(). However, if block_job_create() fails, this reference
will not exist and @mirror_top_bs will have been deleted when we
goto fail.
The issue comes back at all later entries to the fail label: We delete
the BlockJob object before rolling back our changes to the node graph.
This means that we will delete @mirror_top_bs in the process.
All in all, whenever @bs does not have any parents and we go down the
fail path we will dereference @mirror_top_bs after it has been deleted.
Fix this by invoking bdrv_unref() only when block_job_create() was
successful and by bdrv_ref()'ing @mirror_top_bs in the fail path before
deleting the BlockJob object. Finally, bdrv_unref() it at the end of the
fail path after we actually no longer need it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Like in the mirror filter driver, we also need to set the image size for
the commit filter driver. This is less likely to be a problem in
practice than for the mirror because we're not at the active layer here,
but attaching new parents to a node in the middle of the chain is
possible, so the size needs to be correct anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
The filter driver that is inserted by the commit job needs to use the
same AioContext as its parent and child nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Usually guest devices don't like other writers to the same image, so
they use blk_set_perm() to prevent this from happening. In the migration
phase before the VM is actually running, though, they don't have a
problem with writes to the image. On the other hand, storage migration
needs to be able to write to the image in this phase, so the restrictive
blk_set_perm() call of qdev devices breaks it.
This patch flags all BlockBackends with a qdev device as
blk->disable_perm during incoming migration, which means that the
requested permissions are stored in the BlockBackend, but not actually
applied to its root node yet.
Once migration has finished and the VM should be resumed, the
permissions are applied. If they cannot be applied (e.g. because the NBD
server used for block migration hasn't been shut down), resuming the VM
fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
The NVIDIA BAR5 quirk is targeting an ioport BAR. Some older devices
have a BAR5 which is not ioport and can induce a segfault here. Test
the BAR type to skip these devices.
Link: https://bugs.launchpad.net/qemu/+bug/1678466
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This behavior is not indicated in the datasheet and can confuse the OS.
The TCO can trap NMIs from SERR# or IOCHK# and convert them to SMIs; but
any other TCO event is either delivered as an SMI or completely disabled.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAljjxNsACgkQAvw66wEB28Ie0ACdG7BpEyoy88s3EbJl+oVOWKPJ
wkYAninjG993/z1UNjiPh0oKOKOMY8G3
=mLFF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Some 9pfs bugs fixes: potential hang at reset, migration blocker leak.
# gpg: Signature made Tue 04 Apr 2017 17:07:55 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: clear migration blocker at session reset
9pfs: fix multiple flush for same request
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A single bugfix for a error handling issue in pci.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY47ywAAoJECgfDbjSjVRpqCgH/3bINQKosB7x8308IcfUbv9A
hBWHs26cVUtqwmU7zjqKTIodkGrVA9Zf9K8+7rRNd0HPGYFwIMYgQtbqM+R2LSWy
3oW5nlmi8Q4O2beZ2fXB0pjkoyBzErWqzNakgMi4Sb6rFvZP6J6HyIHv5YwKOuxL
CHKOnrBRwjiTUPLPiTVzQu8MdXlqdw5E5TTTPwUnLbBAqpycG1RZHgymzX6IyHTv
SMlpY2iJ9I/QVB4NqZjRmInABY+XmMYCap2Rt26QvUmL2mChUxit/DeOIwRx+JEn
WV0Ldb4nPB/huAqgqP+zX1eEIBuMz7qd2Zop+R5WABcs8tDX85yQkikY9CIz7hc=
=9Sy6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci: fix
A single bugfix for a error handling issue in pci.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 04 Apr 2017 16:33:04 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
pci: Only unmap bus_master_enabled_region if was added previously
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The migration blocker survives a device reset: if the guest mounts a 9p
share and then gets rebooted with system_reset, it will be unmigratable
until it remounts and umounts the 9p share again.
This happens because the migration blocker is supposed to be cleared when
we put the last reference on the root fid, but virtfs_reset() wrongly calls
free_fid() instead of put_fid().
This patch fixes virtfs_reset() so that it honor the way fids are supposed
to be manipulated: first get a reference and later put it back when you're
done.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Li Qiang <liqiang6-s@360.cn>
If a client tries to flush the same outstanding request several times, only
the first flush completes. Subsequent ones keep waiting for the request
completion in v9fs_flush() and, therefore, leak a PDU. This will cause QEMU
to hang when draining active PDUs the next time the device is reset.
Let have each flush request wake up the next one if any. The last waiter
frees the cancelled PDU.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Normally pci_init_bus_master() would be called either via
bus->machine_done.notify or directly from do_pci_register_device().
However if a device's realize() failed, pci_init_bus_master() is not
called, and do_pci_unregister_device() fails on
memory_region_del_subregion() as it was not mapped.
This adds a check that subregion was mapped before unmapping it.
Fixes: c53598ed18 ("pci: Add missing drop of bus master AS reference")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
The qio_dns_resolver_lookup_sync() method is required to be a no-op
for socket kinds that don't require name resolution. Thus the KIND_FD
handling should not return an error.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The channel socket was initialized manually, but forgot to set
QIO_CHANNEL_FEATURE_SHUTDOWN. Thus, the colo_process_incoming_thread
would hang at recvmsg. This patch just call qio_channel_socket_new to
get channel, Which set QIO_CHANNEL_FEATURE_SHUTDOWN already.
Signed-off-by: Wang Guang<wang.guang55@zte.com.cn>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Occasionally if a test crashes or is interrupted by the user
at the wrong moment it could leave behind a stale UNIX
socket in /tmp/. This will then cause a subsequent test
run to fail spuriously with
tests/libqtest.c:70:init_socket: assertion failed (ret != -1): (-1 != -1)
if it happens to reuse the same PID.
Defend against this by deleting any stray stale socket before
trying to open the new ones for this test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1490963801-27870-1-git-send-email-peter.maydell@linaro.org
When running virt-rescue the serial console hangs from time to time.
Virt-rescue runs an ordinary Linux kernel "appliance", but there is
only a single idle process running inside, so the qemu main loop is
largely idle. With virt-rescue >= 1.37 you may be able to observe the
hang by doing:
$ virt-rescue -e ^] --scratch
><rescue> while true; do ls -l /usr/bin; done
The hang in virt-rescue can be resolved by pressing a key on the
serial console.
Possibly with the same root cause, we also observed hangs during very
early boot of regular Linux VMs with a serial console. Those hangs
are extremely rare, but you may be able to observe them by running
this command on baremetal for a sufficiently long time:
$ while libguestfs-test-tool -t 60 >& /tmp/log ; do echo -n . ; done
(Check in /tmp/log that the failure was caused by a hang during early
boot, and not some other reason)
During investigation of this bug, Paolo Bonzini wrote:
> glib is expecting QEMU to use g_main_context_acquire around accesses to
> GMainContext. However QEMU is not doing that, instead it is taking its
> own mutex. So we should add g_main_context_acquire and
> g_main_context_release in the two implementations of
> os_host_main_loop_wait; these should undo the effect of Frediano's
> glib patch.
This patch exactly implements Paolo's suggestion in that paragraph.
This fixes the serial console hang in my testing, across 3 different
physical machines (AMD, Intel Core i7 and Intel Xeon), over many hours
of automated testing. I wasn't able to reproduce the early boot hangs
(but as noted above, these are extremely rare in any case).
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1435432
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20170331205133.23906-1-rjones@redhat.com>
[Paolo: this is actually a glib bug: recent glib versions are also
expecting g_main_context_acquire around g_poll---but that is not
documented and probably not even intended].
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the types of variables in allocate_clusters() to int64_t so we do
not have to worry about potential overflows.
Add an assertion that our accesses to s->bat[] do not result in a buffer
overflow and that the implicit conversion performed when invoking
bat_entry_off() does not result in an integer overflow.
Coverity-id: 1307776
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170331170512.10381-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tweak 097 and 176 to operate on an image that is not cluster-aligned,
to give further coverage of clearing out an entire image, including
the recent fix to eliminate the difference between fast path (97) and
slow (176) for qcow2. Also tested on qcow (97 only, since qcow lacks
snapshots).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331185356.2479-4-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is a subtle difference between the fast (qcow2v3 with no
extra data) and slow path (qcow2v2 format [aka 0.10], or when a
snapshot is present) of qcow2_make_empty(). The slow path fails
to discard the final (partial) cluster of an unaligned image.
The problem stems from the fact that qcow2_discard_clusters() was
silently ignoring sub-cluster head and tail on unaligned requests.
A quick audit of all callers shows that qcow2_snapshot_create() has
always passed a cluster-aligned request since the call was added
in commit 1ebf561; qcow2_co_pdiscard() has passed a cluster-aligned
request since commit ecdbead taught the block layer about preferred
discard alignment; and qcow2_make_empty() was fixed to pass an
aligned start (but not necessarily end) in commit a3e1505.
Asserting that the start is always aligned also points out that we
now have a dead check: rounding the end offset down can never result
in a value less than the aligned start offset (the check was rendered
dead with commit ecdbead). Meanwhile, we do not want to round the
end cluster down in the one case of the end offset matching the
(unaligned) file size - that final partial cluster should still be
discarded.
With those fixes in place, the fast and slow paths are back in sync
at discarding an entire image; the next patch will update
qemu-iotests to ensure we don't regress.
Note that bdrv_co_pdiscard ignores ALL partial cluster requests,
including the partial cluster at the end of an image; it can be
argued that the partial cluster at the end should be special-cased
so that a guest issuing discard requests at proper alignments
everywhere else can likewise empty the entire image. But that
optimization is left for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331185356.2479-3-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The previous commit:
commit a3e1505dae
Author: Eric Blake <eblake@redhat.com>
Date: Mon Dec 5 09:49:34 2016 -0600
qcow2: Don't strand clusters near 2G intervals during commit
extended the 097 test case so that it did two passes, once
with an internal snapshot, once without.
qcow (v1) does not support internal snapshots, so this change
broke test 097 when run against qcow.
This splits 097 in two, creating a new 176 that tests the
internal snapshot codepath, effectively putting 097 back
to its content before the above commit.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170221115512.21918-8-berrange@redhat.com>
[eblake: test collisions: s/173/176/g]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331185356.2479-2-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It would be a bug for a command with the CMD_NOFILE_OK or
CMD_FLAG_GLOBAL flags set to also set the ct->perms field,
because the former says "OK for a file not to be open"
but the latter is a check on a file.
Add an assertion in qemuio_add_command() so we can catch that
sort of buggy command definition immediately rather than it
being a bug that only manifests when a particular set of
command line options is used.
(Coverity gets confused about this (CID 1371723) and reports
that we might dereference a NULL blk pointer in this case,
because it can't tell that that code path never happens with
the cmdinfo_t that we have. This commit won't help unconfuse
it, but it does fix the underlying issue.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1490967529-4767-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 831acdc "sheepdog: Implement bdrv_parse_filename()" and commit
d282f34 "sheepdog: Support blockdev-add" have different ideas on how
the QemuOpts parameters for the server address are named. Fix that.
While there, rename BlockdevOptionsSheepdog member addr to server, for
consistency with BlockdevOptionsSsh, BlockdevOptionsGluster,
BlockdevOptionsNbd.
Commit 831acdc's example becomes
--drive driver=sheepdog,server.type=inet,server.host=fido,server.port=7000,vdi=dolly
instead of
--drive driver=sheepdog,host=fido,vdi=dolly
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-id: 1490895797-29094-10-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
SocketAddress is a simple union, and simple unions are awkward: they
have their variant members wrapped in a "data" object on the wire, and
require additional indirections in C. I intend to limit its use to
existing external interfaces, and convert all internal interfaces to
SocketAddressFlat.
BlockdevOptionsNbd is an external interface using SocketAddress. We
already use SocketAddressFlat elsewhere in blockdev-add. Replace it
by SocketAddressFlat while we can (it's new in 2.9) for simplicity and
consistency. For example,
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"data": { "host": "localhost",
"port": "12345" } } } }
becomes
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"host": "localhost", "port": "12345" } } }
Since the internal interfaces still take SocketAddress, this requires
conversion function socket_address_crumple(). It'll go away when I
update the interfaces.
Unfortunately, SocketAddress is also visible in -drive since 2.8:
-drive if=none,driver=nbd,server.type=inet,server.data.host=127.0.0.1,server.data.port=12345
Nobody should be using it, as it's fairly new and has never been
documented, so adding still more compatibility gunk to keep it working
isn't worth the trouble. You now have to use
-drive if=none,driver=nbd,server.type=inet,server.host=127.0.0.1,server.port=12345
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-9-git-send-email-armbru@redhat.com
[mreitz: Change iotest 147 accordingly]
Because of this interface change, iotest 147 has to be adapted.
Unfortunately, we cannot just flatten all of the addresses because
nbd-server-start still takes a plain SocketAddress. Therefore, we need
both and this is most easily achieved by writing the SocketAddress into
the code and flattening it where necessary.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170330221243.17333-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
SocketAddress is a simple union, and simple unions are awkward: they
have their variant members wrapped in a "data" object on the wire, and
require additional indirections in C. I intend to limit its use to
existing external interfaces. New ones should use SocketAddressFlat.
I further intend to convert all internal interfaces to
SocketAddressFlat. This helper should go away then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-8-git-send-email-armbru@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Note that the new variants are impossible in qemu_gluster_glfs_init(),
because the gconf->server can only come from qemu_gluster_parse_uri()
or qemu_gluster_parse_json(), and neither can create anything but
'inet' or 'unix'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-7-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qemu_gluster_glfs_init() and qemu_gluster_parse_json() rely on the
fact that SocketAddressFlatType has only two members
SOCKET_ADDRESS_FLAT_TYPE_INET and SOCKET_ADDRESS_FLAT_TYPE_UNIX.
Correct, but won't stay correct. Make them more robust.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490895797-29094-6-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
-blockdev and blockdev_add convert their arguments via QObject to
BlockdevOptions for qmp_blockdev_add(), which converts them back to
QObject, then to a flattened QDict. The QDict's members are typed
according to the QAPI schema.
-drive converts its argument via QemuOpts to a (flat) QDict. This
QDict's members are all QString.
Thus, the QType of a flat QDict member depends on whether it comes
from -drive or -blockdev/blockdev_add, except when the QAPI type maps
to QString, which is the case for 'str' and enumeration types.
The block layer core extracts generic configuration from the flat
QDict, and the block driver extracts driver-specific configuration.
Both commonly do so by converting (parts of) the flat QDict to
QemuOpts, which turns all values into strings. Not exactly elegant,
but correct.
However, A few places access the flat QDict directly:
* Most of them access members that are always QString. Correct.
* bdrv_open_inherit() accesses a boolean, carefully. Correct.
* nfs_config() uses a QObject input visitor. Correct only because the
visited type contains nothing but QStrings.
* nbd_config() and ssh_config() use a QObject input visitor, and the
visited types contain non-QStrings: InetSocketAddress members
@numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try
to use them (they're all optional). @to is ignored anyway.
Reproducer:
-drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p
-drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4
both fail with "Invalid parameter type for 'data.ipv4', expected: boolean"
Add suitable comments to all these places. Mark the buggy ones FIXME.
"Fortunately", -drive's driver-specific options are entirely
undocumented.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com
[mreitz: Fixed two typos]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have quite a few switches over SocketAddressKind. Some have case
labels for all enumeration values, others rely on a default label.
Some abort when the value isn't a valid SocketAddressKind, others
report an error then.
Unify as follows. Always provide case labels for all enumeration
values, to clarify intent. Abort when the value isn't a valid
SocketAddressKind, because the program state is messed up then.
Improve a few error messages while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1490895797-29094-4-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Recently we expirience hang with iothreads enabled with the following
call trace:
Thread 1 (Thread 0x7fa95efebc80 (LWP 177117)):
0 ppoll () from /lib64/libc.so.6
2 qemu_poll_ns () at qemu-timer.c:313
3 aio_poll () at aio-posix.c:457
4 bdrv_flush () at block/io.c:2641
5 bdrv_close () at block.c:2143
6 bdrv_delete () at block.c:2352
7 bdrv_unref () at block.c:3429
8 blk_remove_bs () at block/block-backend.c:427
9 blk_delete () at block/block-backend.c:178
10 blk_unref () at block/block-backend.c:226
11 object_property_del_all () at qom/object.c:399
12 object_finalize () at qom/object.c:461
13 object_unref () at qom/object.c:898
14 object_property_del_child () at qom/object.c:422
15 qmp_marshal_device_del () at qmp-marshal.c:1145
16 handle_qmp_command () at /usr/src/debug/qemu-2.6.0/monitor.c:3929
Technically bdrv_flush() stucks in
while (rwco.ret == NOT_DONE) {
aio_poll(aio_context, true);
}
but rwco.ret is equal to 0 thus we have missed wakeup. Code investigation
reveals that we do not have performed aio_context_acquire() on this call
stack.
This patch adds missed lock.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-id: 1490717566-25516-1-git-send-email-den@openvz.org
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
libusbx doesn't exist any more, the fork got merged back to libusb. So
stop using LIBUSBX_API_VERSION and use LIBUSB_API_VERSION instead. For
backward compatibility alias LIBUSB_API_VERSION to LIBUSBX_API_VERSION
in case we figure LIBUSB_API_VERSION isn't defined.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170403105238.23262-1-kraxel@redhat.com
Commit 001ebaca7b fixed some unintended sign extension issues
spotted by Coverity (CID 1005402, 1005403), but didn't catch
all of them. Fix the rest, so we behave consistently whether
'long' is 32 bit or 64 bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1490970671-20560-1-git-send-email-peter.maydell@linaro.org
Thanks to John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
and the Debian Project, we now have access to a SPARC Linux
system we can use for build testing. Move SPARC back into
the "supported" list.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1490698718-23762-1-git-send-email-peter.maydell@linaro.org
The C store helper functions take the address argument as a
target_ulong type; if this is 32 bit but the host is 64 bit
then the SPARC calling convention requires that the caller
must zero extend the value. We weren't doing this, which
meant we could pass values to the caller with high bits set
and QEMU would crash if it was compiled with optimizations.
In particular, the i386 BIOS would not start.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1490871151-29029-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
The C store helper functions take the data argument as a uint8_t,
uint16_t, etc depending on the store size. The SPARC calling
convention requires that data types smaller than the register
size must be extended by the caller. We weren't doing this,
which meant that if QEMU was compiled with optimizations enabled
we could end up storing incorrect values to guest memory.
(In particular the i386 guest BIOS would crash on startup.)
Add code to the trampolines that call the store helpers to
do the zero extension as required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1490871151-29029-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
MemoryRegionCache did not know about virtio support for IOMMUs (because the
two features were developed at the same time). Revert MemoryRegionCache
to "normal" address_space_* operations for 2.9, as it is simpler than
undoing the virtio patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A single bugfix in this pull request, for an ugly assert() failure, if
the user ignores the information in query-hotpluggable-cpus and tries
to hot add CPUs to pseries with bad parameters.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=yK0M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170403' into staging
ppc patch queue 2017-04-03
A single bugfix in this pull request, for an ugly assert() failure, if
the user ignores the information in query-hotpluggable-cpus and tries
to hot add CPUs to pseries with bad parameters.
# gpg: Signature made Mon 03 Apr 2017 11:06:58 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170403:
pseries: Enforce homogeneous threads-per-core
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The evdev devices in input-linux.c are read in blocks of one whole
event. If there are not enough bytes available, they are discarded,
instead of being kept for the next read operation. This results in
lost events, of even non-working devices.
This patch keeps track of the number of bytes to be read to fill up
a whole event, and then handle it.
Changes from v1 to v2:
- Fix: Calculate offset on each iteration
Changes from v2 to v3:
- Fix coding style
- Store offset instead of bytes to be read
Signed-off-by: Javier Celaya <jcelaya@gmail.com>
Message-id: 20170327182624.2914-1-jcelaya@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
